DMV linecard ECI
•
0 likes•115 views
This document provides an overview of products and services offered by Eastern Controls including: Electraulic valve actuators and drives, Camflex and globe valves, ball and butterfly control valves, digital valve positioners, gas detection monitors, portable gas detectors, ball valves, cryogenic valves, thermocouples, RTDs, rotameters, control valves, and calibration and repair services for valves and instruments. Eastern Controls serves Maryland, Washington DC, and Northern Virginia.
Report
Share
Report
Share
Download to read offline
Recommended
Eastern Line card PA
This document provides an overview of products and services offered by Eastern Controls including electraulic valve actuators and drives, ball valves, butterfly valves, positioners, gas detection equipment, flow meters, level instruments, pressure transmitters, analytical instruments, thermocouples, rotameters, and custom valve actuation and repair services. The company serves Pennsylvania, Delaware, and New Jersey from its location in Edgemont, PA and provides an after-hours emergency repair hotline.
Rotork Fluid Systems Hydraulic Unit
Hydraulic power units (HPU’s) complement Rotork's extensive offering of rotary and linear actuators. The company has over three decades of experience in their manufacture, with units in service in a variety of plants and pipelines in locations spanning the globe. Although the HPU’s are primarily intended to power hydraulic actuators they are of course suitable for other applications as well. And, in order to provide a complete range of options to best meet the requirements of any application, RFS also has the Skilmatic range of self-contained electro-hydraulic actuators.
AccuSputter AW 4450 Sputter Deposition Equipment
Allwin21 Corp. is a leading supplier of sputter deposition equipment for high technology applications for Semiconductor III-V, II-VI, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. The AccuSputter AW 4450 is designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new real time AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every AccuSputter AW 4450 sputtering system is supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
ASCO - Solenoid Valves - Oil & Gas Industry Brochure
ASCO provides solenoid valves, actuator control systems, pneumatic actuators, and other products for applications in the oil and gas industries. With over 100 years of experience, global presence, and expertise in hazardous areas, ASCO can deliver integrated automation solutions to meet the challenges of these industries. Their reliable and rugged products are well-suited for critical safety applications worldwide.
Paul smart a
This document discusses electromechanical relays, including their common applications, operating principle, internal components, advantages, limitations, and important specifications. Electromechanical relays use an electromagnet to switch contacts and connect circuits, allowing separation of AC and DC circuits or interfacing between electronic controls and power circuits. They are well-suited for applications like solenoid activation control but have limited switching speeds and contact life.
EESS 2018 Day 2 - Mark Spinks
The document discusses inspection and maintenance of mine site powerlines. It outlines relevant regulations and standards including safe approach distances to overhead powerlines. The presentation covers inspection techniques like visual, drone-based and LiDAR assessments. Defects like split crossarms, broken insulators and low ground clearance identified using technologies from Gridvision/Roames are demonstrated. Maintaining accurate site plans, inspection records and addressing defects found are emphasized for safely managing powerlines on mine sites.
EESS 2018 Day 2 - Bernard Gittins
The document summarizes issues the presenter has observed with Electrical Engineering Control Plans (EECPs) at mines in NSW from 2016-2018. Many EECPs were developed by adapting older Electrical Engineering and Safety Management Plans (EESMPs) rather than starting with a new risk assessment. This can lead to EECPs that do not fully comply with legislation, apply the hierarchy of risk controls, or ensure risks are managed as far as reasonably practical. Standards are also limited and sometimes incorrect, so should not be solely relied upon. The presenter recommends EECPs undergo a new risk assessment process focused on the legislative requirements to develop improved electrical safety controls.
Asco Hazardous Area Solenoid Valves - Sil 3 Functional-Safety
This document provides information on functional safety solutions for solenoid valves from ASCO Numatics. It discusses the key components of a safety loop including the sensing element, logic solver and final element. It then describes single solenoid certified pilot valves, manual reset valves, and redundant pilot valves that can be used as the final element. The document also discusses safety systems like bypass panels, actuator control systems, and redundant control systems to integrate and monitor the components. It provides an overview of terminology used in functional safety and examples of redundant control system configurations.
Recommended
Eastern Line card PA
This document provides an overview of products and services offered by Eastern Controls including electraulic valve actuators and drives, ball valves, butterfly valves, positioners, gas detection equipment, flow meters, level instruments, pressure transmitters, analytical instruments, thermocouples, rotameters, and custom valve actuation and repair services. The company serves Pennsylvania, Delaware, and New Jersey from its location in Edgemont, PA and provides an after-hours emergency repair hotline.
Rotork Fluid Systems Hydraulic Unit
Hydraulic power units (HPU’s) complement Rotork's extensive offering of rotary and linear actuators. The company has over three decades of experience in their manufacture, with units in service in a variety of plants and pipelines in locations spanning the globe. Although the HPU’s are primarily intended to power hydraulic actuators they are of course suitable for other applications as well. And, in order to provide a complete range of options to best meet the requirements of any application, RFS also has the Skilmatic range of self-contained electro-hydraulic actuators.
AccuSputter AW 4450 Sputter Deposition Equipment
Allwin21 Corp. is a leading supplier of sputter deposition equipment for high technology applications for Semiconductor III-V, II-VI, MEMS, Biomedical, Nanotechnology, Solar, Battery & LED industries. The AccuSputter AW 4450 is designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new real time AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every AccuSputter AW 4450 sputtering system is supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
ASCO - Solenoid Valves - Oil & Gas Industry Brochure
ASCO provides solenoid valves, actuator control systems, pneumatic actuators, and other products for applications in the oil and gas industries. With over 100 years of experience, global presence, and expertise in hazardous areas, ASCO can deliver integrated automation solutions to meet the challenges of these industries. Their reliable and rugged products are well-suited for critical safety applications worldwide.
Paul smart a
This document discusses electromechanical relays, including their common applications, operating principle, internal components, advantages, limitations, and important specifications. Electromechanical relays use an electromagnet to switch contacts and connect circuits, allowing separation of AC and DC circuits or interfacing between electronic controls and power circuits. They are well-suited for applications like solenoid activation control but have limited switching speeds and contact life.
EESS 2018 Day 2 - Mark Spinks
The document discusses inspection and maintenance of mine site powerlines. It outlines relevant regulations and standards including safe approach distances to overhead powerlines. The presentation covers inspection techniques like visual, drone-based and LiDAR assessments. Defects like split crossarms, broken insulators and low ground clearance identified using technologies from Gridvision/Roames are demonstrated. Maintaining accurate site plans, inspection records and addressing defects found are emphasized for safely managing powerlines on mine sites.
EESS 2018 Day 2 - Bernard Gittins
The document summarizes issues the presenter has observed with Electrical Engineering Control Plans (EECPs) at mines in NSW from 2016-2018. Many EECPs were developed by adapting older Electrical Engineering and Safety Management Plans (EESMPs) rather than starting with a new risk assessment. This can lead to EECPs that do not fully comply with legislation, apply the hierarchy of risk controls, or ensure risks are managed as far as reasonably practical. Standards are also limited and sometimes incorrect, so should not be solely relied upon. The presenter recommends EECPs undergo a new risk assessment process focused on the legislative requirements to develop improved electrical safety controls.
Asco Hazardous Area Solenoid Valves - Sil 3 Functional-Safety
This document provides information on functional safety solutions for solenoid valves from ASCO Numatics. It discusses the key components of a safety loop including the sensing element, logic solver and final element. It then describes single solenoid certified pilot valves, manual reset valves, and redundant pilot valves that can be used as the final element. The document also discusses safety systems like bypass panels, actuator control systems, and redundant control systems to integrate and monitor the components. It provides an overview of terminology used in functional safety and examples of redundant control system configurations.
ASCO Compact Actuator Control System
The document describes ASCO's Compact Actuator Control System. It is a highly reliable, modular system of standard explosion-proof components like solenoid valves, spool valves, and filters mounted on a vibration-resistant stainless steel base plate. The system offers benefits such as a predefined single flow factor for determining actuator speed, significant reduction in installation costs compared to panel-mounted assemblies, and flexibility to configure various valve and solenoid combinations. It also provides safety and reliability with approvals for hazardous areas and critical applications.
Join the EEvolution presentation
This document discusses Carel's ExV Sistema electronic expansion valves. It notes that the document and its contents are confidential and for internal Carel use only. It provides information on the components of the ExV Sistema, including electronic expansion valves, EVD drivers, pressure and temperature probes. It compares ExV Sistema valves to traditional thermostatic valves, noting advantages like improved performance, food quality, energy savings, reliability and usability of ExV valves. The document also provides guidance on selecting the appropriate expansion valve and EVD driver for cold room design applications.
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...Ukrainian Nuclear Society
The document summarizes key innovative and safety features of the SMR-160 small modular reactor design. It highlights the reactor's passive containment cooling system, integrated containment system providing unlimited cooling, and large water inventory providing protection against an uncovered core. Additional features noted include ease of inspection and maintenance, reduced security costs due to minimal on-site fuel, and an affordable capital cost. Design details provided include a 160MWe power output, 18-24 month fuel cycle, and 80 year planned operation without vessel replacement.SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine
The document describes Holtec International's SMR-160 small modular nuclear reactor. The SMR-160 is a 160MW nuclear power plant with several key safety and economic benefits. It uses a unique integrated design that relies on natural circulation of coolant and gravity for heat removal, making it walkaway safe with no need for external power or pumps. The compact design allows for flexible siting and security. It also has passive safety systems to efficiently remove decay heat without pumps or electricity. The simple and robust design provides safety, security and economics advantages for 60-80 years of operation.
How to ensure peak performance in my Gas Chromatograph
The Gas Chromatograph (GC) is known as the workhorse of the online chemical analysis industry. It is one of the few analyzer types available that minimizes the likelihood of cross interference during measurement, and the GC is also able to measure multiple chemical compounds during each analysis to levels that reach parts-per-million and even parts-per-billion.
To ensure peak performance, efficient GC maintenance is very important, especially now that many end users face a decline in supporting technical resources. In this webinar, we will show you how to optimize a GC maintenance plan.
You will learn:
How to select the right sample system for your GC
Installation considerations for optimal GC performance
Best practices for maintaining a GC
CI_SCS_Intro
CI SCS provides certified fault tolerant safety control systems for critical industrial applications. They have over 35 years of experience in safety system design, certification, and support. Their safety control systems are certified to international standards like IEC 61508 and 61511 and provide reliable, cost-effective solutions for applications in manufacturing, oil and gas, aerospace, and utilities using programmable controllers from vendors like GE and Siemens. CI SCS designs, builds, and certifies complete safety solutions including hardware, software, system design, and certification.
BLD brochure
Electrical leak detection methods use a circuit of magnetic fields and current density to detect leaks in geomembrane liners used in various applications like landfills, lakes, and storage tanks. Temporary electrodes energize the liner, and any leaks are identified by localized high current density that probes can then pinpoint. A Permanent Electrical Leak Monitoring System uses installed sensors to continuously monitor lined areas for leaks through resistivity measurements and custom software analysis. Beyond Leak Detection specializes in these electrical leak detection methods and installation of monitoring systems, with experienced technicians trained in relevant safety certifications.
Nexans Euromold 180A High Voltage Air Insulated Bushing
This document provides specifications for an IN-AIR BUSHING type 180A-24P-O for voltages up to 24 kV and currents up to 250A. It is intended for use insulating equipment with air, like dry type transformers. Each bushing is tested for AC withstand and partial discharge prior to shipping. The bushings meet relevant CENELEC, IEC, and industry standards. The document provides ordering instructions, technical characteristics, and dimensional drawings of the bushings and associated mounting rings and clamps.
Flowserve Control Valve Product Guide (Valtek, Kammer)
Flowserve general service control valves combine platform standardization, high performance, and simplified maintenance to deliver a lower total cost of ownership.
Flowserve delivers a broad range of general service control valves – linear and rotary – with pressure ratings of ANSI Class 150 to 4500/PN 10 to PN 640. These high-performance control valves offer greater reliability, precision control, and flow capacity, with significantly reduced cavitation, flashing, and noise. Quality production ensures increased process yield and throughput.
Because Flowserve general service control valves are constructed on global platforms using standardized parts and components, up-front engineering is held to a minimum. Simplified operation, maintenance, and service further ensure lower total cost of ownership.
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New Catalogue
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New CatalogueThorne & Derrick International
The document discusses hazardous location solutions from ASCO, including solenoid-operated valves. ASCO offers valves that are approved by global regulatory agencies and certified for use in hazardous environments worldwide. The valves are available in various models and constructions for applications such as oil, gas, chemical processing and more. ASCO provides expertise to help customers select the appropriate valves and solve application problems.Brochure- What's New at Probe Aug 15 Rev 4
Probe provides a variety of open hole logging tools to assess hydrocarbon reservoirs, including a Litho-density Tool to measure density and lithology, Compensated Neutron Tools to measure porosity and identify fluid types, and a Dual Induction Laterlog to measure deep, medium, and shallow resistivity. Probe manufactures a complete portfolio of downhole tools used in combination to better understand reservoirs.
EESS 2018 Day 1 - Tim Webster
The document discusses upcoming changes to several Australian and New Zealand standards for explosion protection of electrical equipment (AS/NZS2290.1, AS/NZS3800 & HB239). Key changes include: redefining "readily accessible component"; expanding verification dossier requirements; allowing IEC competency standards as an alternative; making inspection tables mandatory; additional initial inspection requirements; and clarifying repair and modification procedures. The changes aim to fix errors, align the standards, and align with the next IEC edition.
Safety During Installation of Plant and Equipment | Gaurav Singh Rajput
This document discusses safety considerations for installing electrical plant and equipment. It outlines pre-requisites like quality civil works, equipment, tools, and trained personnel. Key aspects of installation include erecting main and auxiliary equipment, earthing systems, and ventilation. Essential safety systems are earthing screens, fire extinguishers, arresters. Risks include falling objects, fires, and electrical/chemical hazards. Proper planning through bar charts and documentation is needed. The installation process and safety precautions for transformers are specifically examined.
Van cầu điều khiển tuyến tính
Công ty TNHH Kỹ Thuật Công Nghệ Minh Việt là nhà cung cấp các dòng van cầu điều khiển tuyến tính được nhập khẩu chính hãng với giá tốt nhất trên thị trường. Đây là dòng van điều khiển có độ chính xác cao, phù hợp với hệ thống có yêu cầu cao về điều chỉnh nhiệt độ, áp suất và lưu lượng của nước, chất lỏng, khí, hơi nước...
Adeon R&D Projects
This document outlines several R&D projects focused on developing vibration test systems using LabVIEW and NI hardware. The projects include a vibroacoustic quality control test system to detect mechanical errors in transmission systems, a machinery diagnostic system for rotating machinery vibration research and education, a universal vibration system for vibration education fundamentals, and a new vibrational power analysis based quality control test system for motor error detection. All projects utilize vibration and acoustic sensors integrated with LabVIEW software.
fpl resume
Chris Babcock has over 10 years of experience as an Instrumentation and Controls Technician at Turkey Point Nuclear Plant. He has extensive experience with Westinghouse nuclear instrumentation systems, radiation monitoring equipment, control systems like Tristation and Foxboro DCS. He is skilled at troubleshooting, procedure writing, and has experience planning work packages. Previously, he served 4 years as an Electronics Technician in the US Coast Guard.
GE Hitachi. Nuclear Innovation
GE Hitachi Nuclear Energy is a joint venture between GE and Hitachi focused on nuclear technology. The presentation discusses GE Hitachi's technology including boiling water and sodium cooled reactors. It highlights innovations to lower costs such as predictive analytics and advanced manufacturing. The presentation concludes that GE Hitachi will continue to lead nuclear innovation, having developed technologies for over 60 years from natural circulation to small modular reactors.
Validation Dataloggers - Jason Daoust
Jason Daoust – Masy Systems
Validation Dataloggers: Trends, considerations, and options in use today
RotorK process Controls
This document provides installation and maintenance instructions for Rotork's CVQ Series quarter-turn control valve actuators. It contains information on hazardous area approvals, health and safety, storage, operation, installation including mounting and cable connections, commissioning, and diagnostics. The actuators are self-contained electric actuators for remote operation of control valves in hazardous and non-hazardous areas.
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case Study
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case StudyPulse Structural Monitoring
The critical equipment used in deepwater drilling operations is subjected to harsh environmental factors such as loop currents, extreme weather, and high seastates. It is important to understand the effects these environmental variables have on subsea wellhead and conductor integrity.
Through the use of drilling riser monitoring systems (DRMS) operational insight into the real-time status of critical equipment such as the Wellhead, Conductor, BOP, and Riser can be instantly evaluated allowing for safe and efficient decision making.
A business case and ROI justification is presented in order to show that a DRMS can reduce Non-Profitable Time (NPT) and Invisible Lost Time (ILT) and is financially justified by saving as few as 1 day of rig time.Centro line card 2018
This is Centro's 2018 line card. Please note the new Automation & Robotics division, Purification & Filtration division, Instrumentation, Measurement & Control division, Pump & Seal Division, Process Equipment & Sanitary Division and Valve, Actuation & Engineered Products division
2016 DUNCAN-MISC BACK
This document appears to be a product catalog from Duncan Company that lists various industrial valves, actuators, controls, instrumentation, and process safety equipment available for purchase. It includes contact information for multiple sales offices across different US states and provides an overview of key product lines. The catalog also includes brief descriptions and pictures showcasing sample equipment such as butterfly valves, ball valves, control valves, and instrumentation including pressure transmitters, flow meters, and gauges.
More Related Content
What's hot
ASCO Compact Actuator Control System
The document describes ASCO's Compact Actuator Control System. It is a highly reliable, modular system of standard explosion-proof components like solenoid valves, spool valves, and filters mounted on a vibration-resistant stainless steel base plate. The system offers benefits such as a predefined single flow factor for determining actuator speed, significant reduction in installation costs compared to panel-mounted assemblies, and flexibility to configure various valve and solenoid combinations. It also provides safety and reliability with approvals for hazardous areas and critical applications.
Join the EEvolution presentation
This document discusses Carel's ExV Sistema electronic expansion valves. It notes that the document and its contents are confidential and for internal Carel use only. It provides information on the components of the ExV Sistema, including electronic expansion valves, EVD drivers, pressure and temperature probes. It compares ExV Sistema valves to traditional thermostatic valves, noting advantages like improved performance, food quality, energy savings, reliability and usability of ExV valves. The document also provides guidance on selecting the appropriate expansion valve and EVD driver for cold room design applications.
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...Ukrainian Nuclear Society
The document summarizes key innovative and safety features of the SMR-160 small modular reactor design. It highlights the reactor's passive containment cooling system, integrated containment system providing unlimited cooling, and large water inventory providing protection against an uncovered core. Additional features noted include ease of inspection and maintenance, reduced security costs due to minimal on-site fuel, and an affordable capital cost. Design details provided include a 160MWe power output, 18-24 month fuel cycle, and 80 year planned operation without vessel replacement.SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine
The document describes Holtec International's SMR-160 small modular nuclear reactor. The SMR-160 is a 160MW nuclear power plant with several key safety and economic benefits. It uses a unique integrated design that relies on natural circulation of coolant and gravity for heat removal, making it walkaway safe with no need for external power or pumps. The compact design allows for flexible siting and security. It also has passive safety systems to efficiently remove decay heat without pumps or electricity. The simple and robust design provides safety, security and economics advantages for 60-80 years of operation.
How to ensure peak performance in my Gas Chromatograph
The Gas Chromatograph (GC) is known as the workhorse of the online chemical analysis industry. It is one of the few analyzer types available that minimizes the likelihood of cross interference during measurement, and the GC is also able to measure multiple chemical compounds during each analysis to levels that reach parts-per-million and even parts-per-billion.
To ensure peak performance, efficient GC maintenance is very important, especially now that many end users face a decline in supporting technical resources. In this webinar, we will show you how to optimize a GC maintenance plan.
You will learn:
How to select the right sample system for your GC
Installation considerations for optimal GC performance
Best practices for maintaining a GC
CI_SCS_Intro
CI SCS provides certified fault tolerant safety control systems for critical industrial applications. They have over 35 years of experience in safety system design, certification, and support. Their safety control systems are certified to international standards like IEC 61508 and 61511 and provide reliable, cost-effective solutions for applications in manufacturing, oil and gas, aerospace, and utilities using programmable controllers from vendors like GE and Siemens. CI SCS designs, builds, and certifies complete safety solutions including hardware, software, system design, and certification.
BLD brochure
Electrical leak detection methods use a circuit of magnetic fields and current density to detect leaks in geomembrane liners used in various applications like landfills, lakes, and storage tanks. Temporary electrodes energize the liner, and any leaks are identified by localized high current density that probes can then pinpoint. A Permanent Electrical Leak Monitoring System uses installed sensors to continuously monitor lined areas for leaks through resistivity measurements and custom software analysis. Beyond Leak Detection specializes in these electrical leak detection methods and installation of monitoring systems, with experienced technicians trained in relevant safety certifications.
Nexans Euromold 180A High Voltage Air Insulated Bushing
This document provides specifications for an IN-AIR BUSHING type 180A-24P-O for voltages up to 24 kV and currents up to 250A. It is intended for use insulating equipment with air, like dry type transformers. Each bushing is tested for AC withstand and partial discharge prior to shipping. The bushings meet relevant CENELEC, IEC, and industry standards. The document provides ordering instructions, technical characteristics, and dimensional drawings of the bushings and associated mounting rings and clamps.
Flowserve Control Valve Product Guide (Valtek, Kammer)
Flowserve general service control valves combine platform standardization, high performance, and simplified maintenance to deliver a lower total cost of ownership.
Flowserve delivers a broad range of general service control valves – linear and rotary – with pressure ratings of ANSI Class 150 to 4500/PN 10 to PN 640. These high-performance control valves offer greater reliability, precision control, and flow capacity, with significantly reduced cavitation, flashing, and noise. Quality production ensures increased process yield and throughput.
Because Flowserve general service control valves are constructed on global platforms using standardized parts and components, up-front engineering is held to a minimum. Simplified operation, maintenance, and service further ensure lower total cost of ownership.
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New Catalogue
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New CatalogueThorne & Derrick International
The document discusses hazardous location solutions from ASCO, including solenoid-operated valves. ASCO offers valves that are approved by global regulatory agencies and certified for use in hazardous environments worldwide. The valves are available in various models and constructions for applications such as oil, gas, chemical processing and more. ASCO provides expertise to help customers select the appropriate valves and solve application problems.Brochure- What's New at Probe Aug 15 Rev 4
Probe provides a variety of open hole logging tools to assess hydrocarbon reservoirs, including a Litho-density Tool to measure density and lithology, Compensated Neutron Tools to measure porosity and identify fluid types, and a Dual Induction Laterlog to measure deep, medium, and shallow resistivity. Probe manufactures a complete portfolio of downhole tools used in combination to better understand reservoirs.
EESS 2018 Day 1 - Tim Webster
The document discusses upcoming changes to several Australian and New Zealand standards for explosion protection of electrical equipment (AS/NZS2290.1, AS/NZS3800 & HB239). Key changes include: redefining "readily accessible component"; expanding verification dossier requirements; allowing IEC competency standards as an alternative; making inspection tables mandatory; additional initial inspection requirements; and clarifying repair and modification procedures. The changes aim to fix errors, align the standards, and align with the next IEC edition.
Safety During Installation of Plant and Equipment | Gaurav Singh Rajput
This document discusses safety considerations for installing electrical plant and equipment. It outlines pre-requisites like quality civil works, equipment, tools, and trained personnel. Key aspects of installation include erecting main and auxiliary equipment, earthing systems, and ventilation. Essential safety systems are earthing screens, fire extinguishers, arresters. Risks include falling objects, fires, and electrical/chemical hazards. Proper planning through bar charts and documentation is needed. The installation process and safety precautions for transformers are specifically examined.
Van cầu điều khiển tuyến tính
Công ty TNHH Kỹ Thuật Công Nghệ Minh Việt là nhà cung cấp các dòng van cầu điều khiển tuyến tính được nhập khẩu chính hãng với giá tốt nhất trên thị trường. Đây là dòng van điều khiển có độ chính xác cao, phù hợp với hệ thống có yêu cầu cao về điều chỉnh nhiệt độ, áp suất và lưu lượng của nước, chất lỏng, khí, hơi nước...
Adeon R&D Projects
This document outlines several R&D projects focused on developing vibration test systems using LabVIEW and NI hardware. The projects include a vibroacoustic quality control test system to detect mechanical errors in transmission systems, a machinery diagnostic system for rotating machinery vibration research and education, a universal vibration system for vibration education fundamentals, and a new vibrational power analysis based quality control test system for motor error detection. All projects utilize vibration and acoustic sensors integrated with LabVIEW software.
fpl resume
Chris Babcock has over 10 years of experience as an Instrumentation and Controls Technician at Turkey Point Nuclear Plant. He has extensive experience with Westinghouse nuclear instrumentation systems, radiation monitoring equipment, control systems like Tristation and Foxboro DCS. He is skilled at troubleshooting, procedure writing, and has experience planning work packages. Previously, he served 4 years as an Electronics Technician in the US Coast Guard.
GE Hitachi. Nuclear Innovation
GE Hitachi Nuclear Energy is a joint venture between GE and Hitachi focused on nuclear technology. The presentation discusses GE Hitachi's technology including boiling water and sodium cooled reactors. It highlights innovations to lower costs such as predictive analytics and advanced manufacturing. The presentation concludes that GE Hitachi will continue to lead nuclear innovation, having developed technologies for over 60 years from natural circulation to small modular reactors.
Validation Dataloggers - Jason Daoust
Jason Daoust – Masy Systems
Validation Dataloggers: Trends, considerations, and options in use today
RotorK process Controls
This document provides installation and maintenance instructions for Rotork's CVQ Series quarter-turn control valve actuators. It contains information on hazardous area approvals, health and safety, storage, operation, installation including mounting and cable connections, commissioning, and diagnostics. The actuators are self-contained electric actuators for remote operation of control valves in hazardous and non-hazardous areas.
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case Study
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case StudyPulse Structural Monitoring
The critical equipment used in deepwater drilling operations is subjected to harsh environmental factors such as loop currents, extreme weather, and high seastates. It is important to understand the effects these environmental variables have on subsea wellhead and conductor integrity.
Through the use of drilling riser monitoring systems (DRMS) operational insight into the real-time status of critical equipment such as the Wellhead, Conductor, BOP, and Riser can be instantly evaluated allowing for safe and efficient decision making.
A business case and ROI justification is presented in order to show that a DRMS can reduce Non-Profitable Time (NPT) and Invisible Lost Time (ILT) and is financially justified by saving as few as 1 day of rig time.What's hot (20)
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine. General Informa...
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine
SMR-160. A Safe and Secure Nuclear Energy Future for Ukraine
How to ensure peak performance in my Gas Chromatograph
How to ensure peak performance in my Gas Chromatograph
Nexans Euromold 180A High Voltage Air Insulated Bushing
Nexans Euromold 180A High Voltage Air Insulated Bushing
Flowserve Control Valve Product Guide (Valtek, Kammer)
Flowserve Control Valve Product Guide (Valtek, Kammer)
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New Catalogue
ASCO Solenoid Valves - Hazardous Area ATEX Certified Valves - New Catalogue
Safety During Installation of Plant and Equipment | Gaurav Singh Rajput
Safety During Installation of Plant and Equipment | Gaurav Singh Rajput
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case Study
Wellhead Fatigue Monitoring: Real-Time Drilling Riser Monitoring ROI Case Study
Similar to DMV linecard ECI
Centro line card 2018
This is Centro's 2018 line card. Please note the new Automation & Robotics division, Purification & Filtration division, Instrumentation, Measurement & Control division, Pump & Seal Division, Process Equipment & Sanitary Division and Valve, Actuation & Engineered Products division
2016 DUNCAN-MISC BACK
This document appears to be a product catalog from Duncan Company that lists various industrial valves, actuators, controls, instrumentation, and process safety equipment available for purchase. It includes contact information for multiple sales offices across different US states and provides an overview of key product lines. The catalog also includes brief descriptions and pictures showcasing sample equipment such as butterfly valves, ball valves, control valves, and instrumentation including pressure transmitters, flow meters, and gauges.
Swanson Flo Wisconsin Office Linecard
Swanson Flo provides innovative process control solutions through quality equipment and experienced application engineering with an unrelenting desire to create proactive customer relationships.
AFS 2016 Line Card Version A2-b
This document lists over 100 fluid power component manufacturers that Advanced Fluid Systems represents. It includes manufacturers of accumulators, cylinders, filters, instrumentation, manifolds, motors, pumps, reservoirs, sensors, valves, and other fluid power products. Advanced Fluid Systems provides repair, field service, motion control systems, mobile solutions, and custom fluid power systems and solutions to its customers. It has locations in central Pennsylvania, greater Philadelphia, and greater Baltimore areas.
Classic Controls Caribbean North Linecard
Classic Controls Lines Represented in the Northern Caribbean
USVI | Bahamas | Cayman Islands | Dominican Republic | Haiti | Jamaica | Turks & Caicos
Product Line
Valtronics Sales is a system integrator, fabricator, manufacturer's representative, and stocking distributor that provides process and analytical solutions for industries involving the measurement and control of liquids and gases. It offers various pre-engineered buildings, turn-key packages, flow metering, skid systems, valve repair, controls installation, field calibration, and more. It represents numerous manufacturers of equipment such as gas chromatographs, ultrasonic meters, combustion analyzers, valves, and more.
Swanson Flo Minnesota Linecard
Swanson Flo provides innovative process control solutions through quality equipment and experienced application engineering with an unrelenting desire to create proactive customer relationships.
Application overview
Industrial UPS systems are commonly found in power generation, transmission, and distribution facilities to provide backup power for critical processes and systems. They are also used in oil and gas applications across upstream, midstream, and downstream facilities. Typical uses include powering control systems, safety equipment, monitoring devices, and telecommunications infrastructure. Around 80% of UPS usage in industrial settings is for automation and electrical balance of plant systems that must remain powered for continuous operations.
Classic Controls Florida Linecard
This document describes the services provided by Classic Controls, Inc., located in Lakeland, Florida. They proudly represent major manufacturers of instrumentation, control systems, valves, filtration equipment, and provide related mechanical services. They offer system design, installation, calibration, repair, and technical support services for customers in Florida, southern Georgia and the Caribbean.
Powerflo Company Profile
This document provides information about Powerflo, an Australian company established in 1911 that designs, manufactures, assembles, and provides after-market support for engineered control valves, safety devices, and process instrumentation. It has offices throughout Australia and New Zealand and 65 full-time employees focused on engineered solutions and first-class after-market service. Powerflo has an annual sales average of over $25 million and serves industries including oil and gas, mining, power generation, chemical and petrochemical, and water and wastewater. The document outlines Powerflo's product and service scope, major customers, and capabilities including valve servicing, instrumentation services, and field services.
Powerflo Company Profile
This document provides information about Powerflo, an Australian company established in 1911 that designs, manufactures, assembles, and provides after-market support for engineered control valves, safety devices, and process instrumentation. It has offices throughout Australia and New Zealand and 65 full-time employees focused on engineered solutions and first-class after-market service. Powerflo has an annual sales average of over $25 million and serves industries including oil and gas, mining, power generation, chemical and petrochemical, and water and wastewater. The document outlines Powerflo's product and service scope, major customers, and capabilities including valve servicing, instrumentation services, field services, and valve maintenance management software.
The kerry company
Electric Over Hydraulic Actuators in both linear and rotary designs, custom engineered to move your equipment
Damper Drive Actuator With Fieldbus Communications
The new PowerVUE™ design utilizes the same rugged Hagan actuator and frame construction, combined with the accuracy and reliability of the Fisher FieldVUE DVC6000 Digital Valve Controller. The pneumatic power positioner remains the most reliable and cost-effective method of actuation. Torque ranges are from 400 ft-lbs to 4,600 ft.-lbs.
Product Line Card 2014
The document summarizes Everest Automation Inc., a provider of instrumentation and control products and services in Eastern Canada. It outlines their full product offering across valves, field instrumentation, control products, analytical products and integrated solutions. It also provides their mission to provide the highest quality automation products and services with strong technical support.
South Bend Controls Corporate Overview
This is a Corporate Overview Presentation of South Bend Controls, a niche fluid control device supplier to the Aerospace, Space, Defense and Medical industries. This presentation covers our Core Technologies, Capabilities, Market Strategies and Products.
Perkin-Elmer 4400,4410,4450 Sputtering Deposition Systems
With an installed base of more than thousands of systems, Perkin-Elmer was a leading supplier of sputter deposition equipment for high technology application in 1990's. The Perkin-Elmer 4400 Series, fully refurbished and upgraded by Allwin21 Corp., were designed for flexibility offering a wide range of operating and process modes. The highest quality construction, components and Allwin21's new AW-4450 System Control assure reliable operation and an ultra clean vacuum environment to yield consistently reproducible results. Every fully refurbished and upgraded Perkin Elmer sputtering system was supported by years of technological experience and backed by a worldwide sales and service organization dedicated to prompt courteous service
Perkin-Elmer 4400, 4410, 4450 Proven Sputter Materials:
Al+W ,Cr/SiO2,SiC ,Ti+Au,InSnO ,SiO2 ,Ti/W ,Ti+Au+Ni,Al2O3 ,Mo ,SiO2+O2 ,Ni/Fe+Cu+SiO2,Ag MoSi2 ,Si+N2(Si3N4) ,Ti/W+Au,Au ,Mo2Si5 ,Si+N2+B4C, Ti/W+Au+Ta, C, Mo5Si3 ,Ta ,Ti/W+Al/Si,Cr Ni ,TaC, Ti/W+Ni/Cr+Au,Cr/Co ,Ni/Cr, Ta+Au , Ti/W+Pt,Cr/Au, Ni+Ni/Cr, TaSi2 ,Al+Ti/W+Ag, Cr+Cu, Ni/Fe ,Ta+SiO2 , W+Al2O3,Cr/Si ,Pt, Zr ,Zn,Cr/SiO, TiO2 ,TiO2+Cr, ZnO2
Brochure BTP 2012
Ba Ria Thermal Power Joint Stock Company operates two gas turbine power plants and two steam turbine power plants in Ba Ria, Vietnam, producing a total of 388.9 MW of power. The company was established in 1992 and provides power generation, equipment maintenance and repair, and water treatment services. It has extensive workshops and equipment for mechanical, electrical, and calibration services.
Wellhead control-pl-web
A wellhead control panel controls subsea valves like the master valve and choke valve through hydraulic or pneumatic actuation. It provides power and controls for safe operation of the valves. Frames produces customizable wellhead control panels for single or multiple wells that can be integrated into plant control systems or operate independently with solar power. The panels have sections for hydraulic power units, wellhead controls, and process valve controls.
Cooling Manifolds
High lighting Plastixs LLC\'s fluid,air and cooling manifold solutions. Standard and custom manifold assemblies featured.
Control_Valve_maintenance and calibration.pdf
The document provides an overview of control valves, including definitions of key terms like Cv and Kv ratings. It discusses common control valve components like actuators, positioners, and accessories. The document also covers standards, characteristics, selection considerations, and challenges like flashing and cavitation that control valves may experience. It includes diagrams to illustrate control valve flow paths and the effects of restrictions on pressure and velocity.
Similar to DMV linecard ECI (20)
Damper Drive Actuator With Fieldbus Communications
Damper Drive Actuator With Fieldbus Communications
Perkin-Elmer 4400,4410,4450 Sputtering Deposition Systems
Perkin-Elmer 4400,4410,4450 Sputtering Deposition Systems
DMV linecard ECI
- 1. Electraulic™ Valve Actuators and Drives High precision, reliability, and self contained Modulating or On/Off configura- tions Camflex® Globe Valves Ball & Butterfly Control Valves SVI® II AP Digital Valve Positioner Severe Service, Low Noise and Anti- Cavitation Designs Combustibles, Toxics, Oxygen Defi- ciency Refrigerant Gas Monitors Portable Gas Detectors Single & Multiplexing Systems Ball Valves Severe Service Cryogenic High Alloy materials Industrial Ball Valves 2-way through 5 way multiport valves Flush Tank Valves Cryogenic Valves & Accessories: Serving Maryland, Washington DC , & Northern Virginia 414 East Joppa Rd. Towson, MD 21286 (410) 321-7222 Phone (410) 321-0963 Fax sales@easterncontrols.com After-Hours Emergency Repair Services Hotline: 1 (866) 566-9820 *For service related emergencies only sales@easterncontrols.com www.easterncontrols.com Tracepak® - Electric and Steam Traced Tubing Bundles VIPAK® Instrument Enclosures SaddlePak® Instrument Installation Supports Verabar® and Accelabar® Velocity Averaging Flow Meters Mass Compensated Flow Systems Main Steam Line Flow Meters Pressure Core® Valve Manifolds Power Plant Valves meet ASME B31.1 Direct-Mount Manifold Systems Pressure Reducing Back-Pressure Regulators Pilot Operated Regulators Liquid, Gas, and Steam Services Thermocouples RTDs Thermowells Cordsets & Junction Boxes Remote I/O Device Net, ASI, HART Foundation Fieldbus, Profibus-PA Ethernet Interface Rotameters - Variable area Indicating and transmitting Glass tube and armored High Quality Control Valves Low Flows Cryogenic Three-way Sanitary Control Applications. Power Ball Valves Securaseal Valves Metal Seated Up to 4500 ANSI GAS DETECTION Electromagnetic, Coriolis Vortex, Ultrasonic-Differential Radar, Ultrasonic, Capacitince Absolute, Gauge, Differential pH/ORP, Conductivity, TOC, Turbidity Web Asset Management
- 2. Calibration and Instrument Repair Custom Valve Actuation After-Hours Emergency Repair Services Hotline: (866) 566-9820 service@easterncontrols.com www.easterncontrols.com Valve Repair Services Eastern Controls Inc. provides only factory-trained and certified technicians Valve Life Cycle Man- Web Enabled Through