Interface PP2000/Lexia-3 fonctionne avec Citroen et Peugeot. Il est compatible avec la plupart des voitures Citroën et Peugeot apd 1995. Lire l'identification, lire les codes de défaut , codes de défaut clairs, auto-scan, etc plusieurs langues disponibles ect. Nouveau modèle fait aussi 307 voiture.
Multi langues, le français est disponible.
QSM Chap 10 Service Culture in Tourism and Hospitality Industry.pptx
Diyobd2 how to reset peugeot dpf additives level with lexia 3 pp2000
1. Numéro de l'article. SP08-C
http://www.diyobd2.fr/wholesale/lexia-3-pp2000-citroen-peugeot-diagnostic-interface
.html
How to reset Peugeot DPF additives level with Lexia 3/PP2000
If you want to refill the DPF fluid on your Peugeot yourself, you will need to have the
counter reset using Lexia 3/ PP2000 software and scanner, which can be purchased
online. My PP2000 V25 is from DIYOBD2.FR for $79.99. After you get the tool, you
can follow the tutorial below to reset additives levels and counters for your Peugeot
DPF. It is very quick and simple to do.
1. Load and get your Diagbox / PP2000 up and running and interfaced to your car.
2. Select ECU Configuration and Services.
3. Select Global Test and follow prompts.
4. The diagnostics will take up to 5 minutes to run.
5. Select Diesel Fuel Additive Control unit.
6. Select Configuration.
7. Select Cleaning or replacement of DPF.
8. Note the number of injections and double click the red text. Follow the prompt and
ok.
9. First counter Zero reset completed.
10. Select Replacement of filling of rest.
2. 11. READ the INSTRUCTIONS on Screen and press ok.
12. Note the count and double click the red counter and it will be reset after ignoring
the warning.
13. Remove the ignition key and unplug PP from the OBD2 port.
14. Unlock the fuel cap and remove and count to 10 and replace.
15. Plug back in PP and power the ignition but do not start the engineer.
16. Select Cleaning or replacement of DPF again and check the counter is still 0.
That is it. The levels and counters have been reset. I have successfully done this on a
2002 307 2.0 Hatchback 110 Rapier. Hope it will work for you too.
*DISCLAIMER - This modification, if carried out is of responsibility of those
carrying it out.