- Daewoo reserves the right to improve its products at any time without obligation to update previously sold machines. Consumers should periodically check with distributors for documentation on purchased equipment.
- The manual illustrations represent actual equipment but may vary from the user's machine.
- Safety is the top priority when operating or maintaining the wheel loader. Proper training and understanding of safety procedures is required.
Daewoo doosan solar 225 nlc v excavator service repair manualjfdjjskekksemm
This shop manual provides specifications, maintenance procedures, and repair information for a Daewoo Solar 225NLC-V track excavator. It includes sections on safety, specifications, general maintenance, the upper structure, lower structure and chassis, engine and drive train, hydraulics, electrical systems, and attachments. Safety precautions are emphasized throughout, including proper mounting and dismounting of the machine, fire hazards related to fuels and fluids, and safe lifting procedures when using the excavator's lifting capabilities.
Claas axion 900 (type a23) tractor service repair manual (serial number a2300...jfdjjskekksemm
This repair manual provides instructions for maintaining an EQ 200 gearbox on a CLAAS tractor. It details procedures for repairs like replacing the sump and centrifuge oil vapour filter. Technical specifications are provided, like torque values for fasteners and lubricants to use. Special tools needed for some repairs are also listed. The manual aims to help technicians perform repairs correctly while ensuring safety.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining control of tools and blocking movable parts are emphasized to prevent injury.
Daewoo doosan solar 400 lc v excavator operation and maintenance manualfujsjefjskekmme
1. Daewoo reserves the right to improve its products and implement improvements at any time without obligation to update previously sold machines.
2. It is recommended that consumers periodically check for recent documentation from their distributor on purchased equipment, as it may include optional attachments not originally included.
3. Illustrations in the manual are representations and may vary from the actual machine.
Doosan dl300 5 wheel loader service repair manualjfdjjskekksemm
This document provides safety instructions and overview information for servicing an engine. It contains sections on safety, engine overview, identification, specifications, mounting procedures, tightening torques for various engine components, and exhaust system details. The document provides detailed instructions, component descriptions, diagrams and specifications to guide maintenance and repair of the engine.
This manual provides instructions for maintenance procedures such as disassembly and reassembly of machines. It explains safety precautions, machine configurations, hydraulic systems, troubleshooting, and engines. The manual is intended to improve maintenance techniques and items are subject to change without notice. Front and rear, left and right orientations are defined from the operator's perspective. The machine serial number is used for ordering parts and inquiries. Record of manual distribution is kept and the person in charge will be notified of any updates.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Daewoo doosan solar 225 nlc v excavator service repair manualjfdjjskekksemm
This shop manual provides specifications, maintenance procedures, and repair information for a Daewoo Solar 225NLC-V track excavator. It includes sections on safety, specifications, general maintenance, the upper structure, lower structure and chassis, engine and drive train, hydraulics, electrical systems, and attachments. Safety precautions are emphasized throughout, including proper mounting and dismounting of the machine, fire hazards related to fuels and fluids, and safe lifting procedures when using the excavator's lifting capabilities.
Claas axion 900 (type a23) tractor service repair manual (serial number a2300...jfdjjskekksemm
This repair manual provides instructions for maintaining an EQ 200 gearbox on a CLAAS tractor. It details procedures for repairs like replacing the sump and centrifuge oil vapour filter. Technical specifications are provided, like torque values for fasteners and lubricants to use. Special tools needed for some repairs are also listed. The manual aims to help technicians perform repairs correctly while ensuring safety.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining control of tools and blocking movable parts are emphasized to prevent injury.
Daewoo doosan solar 400 lc v excavator operation and maintenance manualfujsjefjskekmme
1. Daewoo reserves the right to improve its products and implement improvements at any time without obligation to update previously sold machines.
2. It is recommended that consumers periodically check for recent documentation from their distributor on purchased equipment, as it may include optional attachments not originally included.
3. Illustrations in the manual are representations and may vary from the actual machine.
Doosan dl300 5 wheel loader service repair manualjfdjjskekksemm
This document provides safety instructions and overview information for servicing an engine. It contains sections on safety, engine overview, identification, specifications, mounting procedures, tightening torques for various engine components, and exhaust system details. The document provides detailed instructions, component descriptions, diagrams and specifications to guide maintenance and repair of the engine.
This manual provides instructions for maintenance procedures such as disassembly and reassembly of machines. It explains safety precautions, machine configurations, hydraulic systems, troubleshooting, and engines. The manual is intended to improve maintenance techniques and items are subject to change without notice. Front and rear, left and right orientations are defined from the operator's perspective. The machine serial number is used for ordering parts and inquiries. Record of manual distribution is kept and the person in charge will be notified of any updates.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and updfujskeksmefm
- The document is an operator's manual for a hydraulic excavator that provides safety instructions and warnings to avoid injury or death during operation.
- It emphasizes the importance of fully understanding the machine's controls and functions before operating, and following all safety rules, regulations and precautions.
- Operators must wear appropriate protective equipment like a hard hat, safety shoes, glasses and gloves and be unimpaired when working with the excavator.
Takeuchi tb128 fr mini excavator service repair workshop manual (serial no. 1...fujsjefjskekmme
1. This manual provides instructions for maintenance personnel on procedures for disassembling, inspecting, and troubleshooting a mini excavator, as well as reference values and specifications.
2. Directional terms like front, rear, left, and right are defined for use in the manual.
3. Safety precautions for working on the mini excavator include wearing protective equipment, installing fire extinguishers and first aid kits, stopping the engine before working, and securing any raised or moving parts.
Daewoo doosan solar 220 lc 6 excavator service repair manualfujsjefjskekmme
This document provides safety information and guidelines for operating and maintaining a Doosan excavator. It outlines general safety essentials, locations of safety labels, precautions for lifting, unauthorized modifications, hazard information, and safety procedures for starting the engine, operating the machine, maintenance, batteries, towing, shipping, and lifting with a sling. The document emphasizes that unsafe practices can lead to serious injury or death and instructs the operator to read the entire manual before use.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...jfdjjskekksemm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear like hard hats and safety glasses. It instructs technicians to stop the engine before performing maintenance, securely block parts that could fall, and stay clear of moving parts. The document emphasizes following all safety rules and regulations to prevent injuries when working on the machine.
Doosan dl550 wheel loader service repair manualfujsjefjskekmme
The document provides safety instructions for wheel loaders. It discusses general safety practices including wearing personal protective equipment, avoiding hot or pressurized fluids, preventing flying or falling objects, and ensuring proper maintenance of the machine. It also covers safety during transportation, operation, and maintenance of the wheel loader.
Bobcat t36120 sl telescopic handler service repair manual (t36120sl sn b3gs11...jfjskeksemm
The document provides safety instructions and maintenance information for servicing a Bobcat telescopic handler. It emphasizes that safe operation is the operator's responsibility and requires a qualified operator. When servicing or dismantling the machine, precautions must be taken to avoid silica dust and properly dispose of components. Fire prevention measures are outlined for maintenance, operation, electrical systems, fueling, welding and use of fire extinguishers. The document also provides information on locating serial numbers and inspecting the machine after repairs.
Doosan dl220 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety information for wheel loaders. It outlines general safety essentials, including not modifying the machine without authorization. Operators should be trained and authorized, and follow all safety rules. Guards and covers and safety features like seat belts should be used properly. Inside the cab, keep floors clear and avoid distractions. When operating, do not put hands or head outside the cab. Secure long hair and loose clothing, and wear protective gear like eye protection and gloves.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Daewoo doosan mega 250 v 250 v wheel loader service repair manual - serial nu...jfdjjskfkksmemm
This document provides safety information for operating and maintaining a Doosan wheel loader. It outlines general safety essentials, hazards to be aware of before starting the engine, during operation, and during maintenance. Personal protective equipment requirements and safe practices for mounting/dismounting, towing, shipping, and transportation are also covered. Operators and maintenance personnel are instructed to thoroughly read and understand the safety information provided.
This manual provides instructions for maintenance procedures of a machine, including disassembly, reassembly, inspections, specifications, and troubleshooting. It emphasizes several important safety precautions for technicians performing maintenance, such as wearing protective equipment, blocking the machine securely, and avoiding moving parts. The document defines terms like front/rear and left/right in relation to the machine's orientation and components.
Takeuchi tb240 mini excavator operator manual (serial no. 124000003 and up)fujsjefjskekmme
This document provides safety instructions and guidelines for the operation and maintenance of an excavator. It discusses hazards that could cause injury or death if not avoided, including improper operation, inspection, and maintenance. All operators must read and understand this manual fully before using the machine. The manual describes the various components, controls, and functions of the excavator and provides procedures for starting and operating the machine safely. It also lists inspection and maintenance tasks to complete at regular intervals to keep the excavator in good working order.
Doosan da40 articulated dump truck service repair manualfujsjefjskekmme
This document provides general instructions and safety information for working in a vehicle shop manual. It includes:
- A table of standard torque limits for different bolt sizes and strengths.
- Descriptions of common sealing compounds, lubricants, and the risks associated with organic solvents, coolant, noise, and vibrations.
- Safety guidelines for working with pressurized coolant, heavy objects, rotating parts, springs and other shop hazards. Workers should be skilled, follow all warnings, and take precautions like protective equipment.
- Instructions for how to use the shop manual, which contains repair information divided into chapters for different vehicle systems. The manual aims to help technicians perform quality repairs safely and correctly.
Daewoo doosan solar 420 lc v excavator service repair manualfujsjefjskekmme
This document provides safety guidelines for operating a track excavator. It outlines general safety essentials, labels the location of safety labels on the excavator, summarizes safety precautions for lifting loads, identifies work site precautions, and provides safety guidelines for excavator operation, equipment, maintenance, shipping, and lifting with a sling. The document emphasizes following all safety recommendations and using properly maintained tools and equipment. It warns that unsafe excavator use could lead to serious injury or death.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
This manual provides safety precautions and instructions for maintenance of the machine. It explains that personal protective equipment should be worn, open flames avoided when fueling, and moving parts should not be touched. Proper blocking and support of heavy components is emphasized when working beneath the machine.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Takeuchi tb1140 hydraulic excavator parts catalogue manual (serial no. 514400...ujjjjfkksekmmdm
The document is an exploded diagram parts list for a TB1140 excavator. It contains multiple pages detailing the individual parts that make up assemblies for the lower frame, steps, shoe guides, steel crawler belts, rubber crawler belts, segment rubber crawler belts, carrier rollers, track rollers, optional track guards, and front idlers of the excavator. Each part lists the part number, description, quantity, and other identifying information.
Takeuchi tb240 mini excavator parts catalogue manual (serial no. 124000003 an...ujjjjfkksekmmdm
The document provides parts information for a TB240 excavator. It includes lists of parts for various assemblies of the excavator with part numbers, descriptions, quantities and other details. The assemblies covered include the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing and swivel joint & accessories.
Takeuchi tb219 mini excavator parts catalogue manual (serial no. 121900003 an...ujjjjfkksekmmdm
The document is an exploded diagram and parts list for a TB219 excavator. It includes diagrams and lists of parts for the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories of the excavator. Each component drawing shows the part numbers, descriptions, quantities, and other information for the individual parts that make up that component.
Takeuchi tb180 fr parts catalogue manual (serial no. 17840001 and up)ujjjjfkksekmmdm
The document provides parts information for a Takeuchi TB180FR excavator. It includes diagrams and lists of parts for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, and slew bearing. The parts are identified by number, description, quantity, and other specifications.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining safety is essential when performing excavator maintenance.
This document provides an introduction and safety precautions for maintaining a machine. It begins by stating that the manual explains procedures for disassembling and reassembling the machine, as well as maintenance and troubleshooting information. Several safety precautions are then listed, including wearing protective equipment, blocking parts that could fall, fueling safely, and avoiding hot or moving components. Maintainers are instructed to clean the machine, stop the engine before working, and secure any opened panels.
Takeuchi tb128 fr mini excavator service repair workshop manual (serial no. 1...fujsjefjskekmme
1. This manual provides instructions for maintenance personnel on procedures for disassembling, inspecting, and troubleshooting a mini excavator, as well as reference values and specifications.
2. Directional terms like front, rear, left, and right are defined for use in the manual.
3. Safety precautions for working on the mini excavator include wearing protective equipment, installing fire extinguishers and first aid kits, stopping the engine before working, and securing any raised or moving parts.
Daewoo doosan solar 220 lc 6 excavator service repair manualfujsjefjskekmme
This document provides safety information and guidelines for operating and maintaining a Doosan excavator. It outlines general safety essentials, locations of safety labels, precautions for lifting, unauthorized modifications, hazard information, and safety procedures for starting the engine, operating the machine, maintenance, batteries, towing, shipping, and lifting with a sling. The document emphasizes that unsafe practices can lead to serious injury or death and instructs the operator to read the entire manual before use.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...jfdjjskekksemm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear like hard hats and safety glasses. It instructs technicians to stop the engine before performing maintenance, securely block parts that could fall, and stay clear of moving parts. The document emphasizes following all safety rules and regulations to prevent injuries when working on the machine.
Doosan dl550 wheel loader service repair manualfujsjefjskekmme
The document provides safety instructions for wheel loaders. It discusses general safety practices including wearing personal protective equipment, avoiding hot or pressurized fluids, preventing flying or falling objects, and ensuring proper maintenance of the machine. It also covers safety during transportation, operation, and maintenance of the wheel loader.
Bobcat t36120 sl telescopic handler service repair manual (t36120sl sn b3gs11...jfjskeksemm
The document provides safety instructions and maintenance information for servicing a Bobcat telescopic handler. It emphasizes that safe operation is the operator's responsibility and requires a qualified operator. When servicing or dismantling the machine, precautions must be taken to avoid silica dust and properly dispose of components. Fire prevention measures are outlined for maintenance, operation, electrical systems, fueling, welding and use of fire extinguishers. The document also provides information on locating serial numbers and inspecting the machine after repairs.
Doosan dl220 wheel loader service repair manualjfdjjskfkksmemm
This document provides safety information for wheel loaders. It outlines general safety essentials, including not modifying the machine without authorization. Operators should be trained and authorized, and follow all safety rules. Guards and covers and safety features like seat belts should be used properly. Inside the cab, keep floors clear and avoid distractions. When operating, do not put hands or head outside the cab. Secure long hair and loose clothing, and wear protective gear like eye protection and gloves.
Daewoo doosan solar 330 lc v excavator service repair manualjfdjjskfkksmemm
Daewoo provides safety guidelines for operating excavators. Key points include:
1. Excavators are primarily designed for earthmoving, not lifting, which requires approved configurations.
2. Lifting capacity ratings assume level ground and loads supported evenly without side loads.
3. Operators should follow all safety instructions and check local regulations regarding heavy lifting.
4. Work crews must coordinate signals and procedures to ensure safe lifting.
The full safety document covers general safety, worksite precautions, operating procedures, equipment maintenance, transportation, and lifting capacity ratings. Operators and crews should thoroughly review all guidelines to prevent injury or damage.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and updfujskeksmefm
This document provides an operator's manual for a hydraulic excavator. It begins with warnings about reading the instructions to prevent injury or death. It explains that the owner is responsible for fully instructing operators on safe operation. It provides guidance on proper operation, inspection, and maintenance and cautions that improper practices can cause injury or death. It defines signal words used and various symbols.
Daewoo doosan mega 250 v 250 v wheel loader service repair manual - serial nu...jfdjjskfkksmemm
This document provides safety information for operating and maintaining a Doosan wheel loader. It outlines general safety essentials, hazards to be aware of before starting the engine, during operation, and during maintenance. Personal protective equipment requirements and safe practices for mounting/dismounting, towing, shipping, and transportation are also covered. Operators and maintenance personnel are instructed to thoroughly read and understand the safety information provided.
This manual provides instructions for maintenance procedures of a machine, including disassembly, reassembly, inspections, specifications, and troubleshooting. It emphasizes several important safety precautions for technicians performing maintenance, such as wearing protective equipment, blocking the machine securely, and avoiding moving parts. The document defines terms like front/rear and left/right in relation to the machine's orientation and components.
Takeuchi tb240 mini excavator operator manual (serial no. 124000003 and up)fujsjefjskekmme
This document provides safety instructions and guidelines for the operation and maintenance of an excavator. It discusses hazards that could cause injury or death if not avoided, including improper operation, inspection, and maintenance. All operators must read and understand this manual fully before using the machine. The manual describes the various components, controls, and functions of the excavator and provides procedures for starting and operating the machine safely. It also lists inspection and maintenance tasks to complete at regular intervals to keep the excavator in good working order.
Doosan da40 articulated dump truck service repair manualfujsjefjskekmme
This document provides general instructions and safety information for working in a vehicle shop manual. It includes:
- A table of standard torque limits for different bolt sizes and strengths.
- Descriptions of common sealing compounds, lubricants, and the risks associated with organic solvents, coolant, noise, and vibrations.
- Safety guidelines for working with pressurized coolant, heavy objects, rotating parts, springs and other shop hazards. Workers should be skilled, follow all warnings, and take precautions like protective equipment.
- Instructions for how to use the shop manual, which contains repair information divided into chapters for different vehicle systems. The manual aims to help technicians perform quality repairs safely and correctly.
Daewoo doosan solar 420 lc v excavator service repair manualfujsjefjskekmme
This document provides safety guidelines for operating a track excavator. It outlines general safety essentials, labels the location of safety labels on the excavator, summarizes safety precautions for lifting loads, identifies work site precautions, and provides safety guidelines for excavator operation, equipment, maintenance, shipping, and lifting with a sling. The document emphasizes following all safety recommendations and using properly maintained tools and equipment. It warns that unsafe excavator use could lead to serious injury or death.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
This manual provides safety precautions and instructions for maintenance of the machine. It explains that personal protective equipment should be worn, open flames avoided when fueling, and moving parts should not be touched. Proper blocking and support of heavy components is emphasized when working beneath the machine.
Doosan dl400 wheel loader service repair manualjfdjjskfkksmemm
The document provides safety information for operating a Doosan wheel loader, including:
1) It outlines general safety essentials, such as following all safety recommendations and using tools and equipment in good working order.
2) It specifies the location of safety labels on the machine and prohibits unauthorized modifications.
3) It describes general hazard information and safety precautions that should be followed before starting the engine, during machine operation, maintenance, and other activities like working with the battery, towing, and shipping. Failure to follow the safety guidelines could result in serious injury or death.
Takeuchi tb1140 hydraulic excavator parts catalogue manual (serial no. 514400...ujjjjfkksekmmdm
The document is an exploded diagram parts list for a TB1140 excavator. It contains multiple pages detailing the individual parts that make up assemblies for the lower frame, steps, shoe guides, steel crawler belts, rubber crawler belts, segment rubber crawler belts, carrier rollers, track rollers, optional track guards, and front idlers of the excavator. Each part lists the part number, description, quantity, and other identifying information.
Takeuchi tb240 mini excavator parts catalogue manual (serial no. 124000003 an...ujjjjfkksekmmdm
The document provides parts information for a TB240 excavator. It includes lists of parts for various assemblies of the excavator with part numbers, descriptions, quantities and other details. The assemblies covered include the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, slew bearing and swivel joint & accessories.
Takeuchi tb219 mini excavator parts catalogue manual (serial no. 121900003 an...ujjjjfkksekmmdm
The document is an exploded diagram and parts list for a TB219 excavator. It includes diagrams and lists of parts for the lower frame, shoe slide, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories of the excavator. Each component drawing shows the part numbers, descriptions, quantities, and other information for the individual parts that make up that component.
Takeuchi tb180 fr parts catalogue manual (serial no. 17840001 and up)ujjjjfkksekmmdm
The document provides parts information for a Takeuchi TB180FR excavator. It includes diagrams and lists of parts for the lower frame, crawler belt, carrier roller, track roller, front idler, track adjuster, travel device, and slew bearing. The parts are identified by number, description, quantity, and other specifications.
This document provides safety precautions and guidelines for maintenance of an excavator. It outlines general safety rules including wearing proper protective equipment, preparing the work area, stopping the engine before maintenance, and securing components. It also provides cautions for specific tasks like fueling, tilting the platform, and working with pressurized hydraulic components. Maintaining safety is essential when performing excavator maintenance.
This document provides an introduction and safety precautions for maintaining a machine. It begins by stating that the manual explains procedures for disassembling and reassembling the machine, as well as maintenance and troubleshooting information. Several safety precautions are then listed, including wearing protective equipment, blocking parts that could fall, fueling safely, and avoiding hot or moving components. Maintainers are instructed to clean the machine, stop the engine before working, and secure any opened panels.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides a workshop manual for a TB175W hydraulic excavator. It contains safety precautions and cautions for disassembly, assembly, removal and installation of parts. Sections include general information, specifications, machine configuration, hydraulic units, and troubleshooting. Maintenance personnel should follow the safety guidelines and use this manual as a reference for service activities.
Takeuchi tb175 w hydraulic excavator service repair workshop manual (serial n...ujjjjfkksekmmdm
This document provides safety precautions and guidelines for maintenance of the machine. It outlines proper personal protective equipment to wear, such as hard hats and safety glasses. It instructs technicians to stop the engine and attach a "Do Not Operate" tag before performing any maintenance. Technicians should also clean the machine, secure any raised or moving components, and be aware of rotating or moving parts to avoid injury. The document emphasizes following all safety rules and regulations when working on the machine.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17540...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the front and rear axles of a TB175W tractor. It includes 6 pages detailing over 70 individual parts for the front axle assembly, their part numbers, quantities, and references to additional documents. A further 7 pages provide the same level of detail for components of the rear axle assembly.
Takeuchi tb175 w hydraulic excavator parts catalogue manual (serial no. 17520...ujjjjfkksekmmdm
This document contains parts lists and diagrams for the piping and components of the lower hydraulic system for a TB175W excavator. It includes items such as hoses, unions, valves, fittings and seals. The parts are organized into sections for the dozer blade, rotating shaft, and multiple pages of piping diagrams referencing the lower hydraulic system. Serial numbers are provided for the excavator and some components.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 175400095 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides information about operating safely, including using proper protective equipment, following signals, and keeping safety equipment in place. The document instructs operating within temperature ranges and stopping if any problems are found. It also includes sections about controls, operation, transport, maintenance, troubleshooting and specifications.
Takeuchi tb175 w hydraulic excavator operator manual serial no. 17520209 and upujjjjfkksekmmdm
This document provides an operator's manual for a hydraulic excavator. It begins with several warnings about reading the instructions to avoid injury or death. It then provides guidance on safe operation, including using proper protective equipment, following signals from signal persons, keeping safety equipment in place, and avoiding fire hazards. It also describes daily inspection and maintenance requirements and emergency exit procedures.
Takeuchi tb175 hydraulic excavator operator manual serial no. 175301106 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17530314 and upujjjjfkksekmmdm
1. The document provides safety instructions for the proper operation of a hydraulic excavator.
2. It emphasizes the importance of reading and understanding all safety messages to prevent accidents and injuries.
3. Operators must be trained and qualified, wear appropriate protective equipment, and not operate under the influence of substances.
Takeuchi tb175 hydraulic excavator operator manual serial no. 17512105 and upujjjjfkksekmmdm
1. The document provides safety instructions for operating a hydraulic excavator, including preparing for operation, starting the machine, operating safely, stopping safely, transporting, and maintenance.
2. Wear appropriate protective equipment, know the work area, perform inspections, and clear the area of people before starting.
3. Maintain three points of contact when mounting and dismounting, start the machine only when it is safe to do so, and follow all procedures carefully.
This document is a parts manual that provides part numbers, descriptions, quantities, and other information for components of a Takeuchi TB138FR excavator. It includes sections on the lower frame, crawler belt, track roller, front idler, track adjuster, travel device, and slew bearing. The manual contains diagrams and part lists for each component. Serial numbers 138200001 through 138200366 apply to some parts, while others apply to the range 138200367 and above.
Takeuchi tb128 fr mini excavator parts catalogue manual (serial no. 12830003 ...ujjjjfkksekmmdm
This document appears to be an excerpt from a technical manual or parts catalog for a TB128FR machine. It contains several sections with lists of parts, part numbers, quantities and other specifications for various components and assemblies of the machine, including the lower frame, crawler belts, carrier rollers, track rollers, front idler, track adjuster, travel device, slew bearing, and swivel joint & accessories. Each section includes an item list table with relevant information about the individual parts that make up each assembly.
Takeuchi tb23 r mini excavator parts catalogue manual (serial no.12300007 and...ujjjjfkksekmmdm
This document is a parts manual for a TB20R/23R machine. It contains 12 sections with diagrams and lists of parts including shoe slide assembly, crawler belt, track roller, front idler, track adjuster, travel device, slew bearing, swivel joint and accessories, and dozer blade. Each section contains the part numbers, descriptions, quantities, and other information for the component parts. Serial numbers are provided for some parts that vary between different machine serial number ranges.
Takeuchi tb20 r mini excavator parts catalogue manual (serial no.12300007 and...ujjjjfkksekmmdm
This document is a parts manual for a TB20R/23R machine. It contains 12 sections with part numbers, descriptions and quantities for components such as the shoe slide assembly, crawler belt, track roller, dozer blade and more. Each section includes reference information and serial number notes for the parts listed.
Doosan dl350 5 wheel loader service repair manualujjjjfkksekmmdm
The document is a shop manual that provides instructions for servicing and maintaining the DL300-5/DL350-5 wheel loader. It contains sections on safety, specifications, maintenance, the engine, drivetrain, brakes, hydraulics and other systems. The engine section provides an overview of the engine, specifications, identification details, maintenance instructions and tightening torques. It describes the engine type as a 4-cycle, water cooled, turbocharged diesel engine.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Daewoo doosan mega 160 wheel loader service repair manual sn 1021 and up
1. 023-00035E Shop Manual
Daewoo reserves the right to improve our products in a continuing process to provide the best possible
product to the market place. These improvements can be implemented at any time with no obligation to
change materials on previously sold products. It is recommended that consumers periodically contact their
distributors for recent documentation on purchased equipment.
This documentation may include attachments and optional equipment that is not available in your
machine’s package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Shop Manual
023-00035E
Mega 160 S/N 1021 and Up
Mega 160TC S/N 1001 and Up
March 2001
Mega 160 / 160TC
2. Table of Contents
Page I
1TABLE OF CONTENTS
Return to Master Table of Contents
Safety
Wheel Loader Safety .............................................................................S0103000
Specifications
Specifications for Mega 160 / 160TC.....................................................S0203050
General Maintenance
General Maintenance Procedures.........................................................S0302000
Standard Torques..................................................................................S0309000
Upper Structure
Counterweight........................................................................................S0403020
Fuel Transfer Pump...............................................................................S0405500
Hydraulic oil tank ...................................................................................S0406020
Lower Structure and Chassis
Center Joint (Articulation Joint)..............................................................S0502000
Engine and Drive Train
Axle (Clark-Hurth)..................................................................................S0602000
Air-Conditioner.................................................................................... S0605050K
Transmission (ZF 4WG130) ..................................................................S0607060
Transmission Error Codes (ZF) .......................................................... S0607900C
Wheel Assembly....................................................................................S0608000
Hydraulics
Hydraulic System...................................................................................S0702160
Accumulator...........................................................................................S0703000
Cylinders................................................................................................S0705010
3. Table of Contents
Page II
Pilot Pump (John S. Barnes) .................................................................S0708440
Main Pump (Haldex G20 and G30 Series) ............................................S0708450
Main Control Valve (Husco)...................................................................S0709445
Brake and Pilot Supply Valve ................................................................S0709525
Pilot Control Valve Lever .......................................................................S0709530
Option Solenoid Valve ...........................................................................S0709535
Priority Valve..........................................................................................S0709650
Power Steering Unit...............................................................................S0709720
Hydraulic Schematic (Mega 160)...........................................................S0793030
Electrical System
Electrical System ...................................................................................S0802170
Electrical Schematic (Mega 160)...........................................................S0893030
Attachments
Loader Arm Assembly ...........................................................................S0904010
5. S0103000
Page 2
Wheel Loader Safety
Return to Master Table of Contents
TABLE OF CONTENTS
To the Operator of a Daewoo Wheel Loader..................................................3
General Safety Essentials ..............................................................................4
Location of Safety Labels............................................................................... 5
Unauthorized Modifications............................................................................ 5
Work-Site Precautions.................................................................................... 5
Operation........................................................................................................ 8
Equipment .................................................................................................... 12
Maintenance................................................................................................. 16
Shipping and Transportation ........................................................................ 19
6. S0103000
Page 3
Wheel Loader Safety
Return to Master Table of Contents
TO THE OPERATOR OF A DAEWOO WHEEL LOADER
Please respect the importance of taking responsibility for your own safety, and that other people who may
be affected by your actions.
Safety information on the following pages is organized into the following topics.
1. “General Safety Essentials” on page 4
2. “Location of Safety Labels” on page 5
3. “Unauthorized Modifications” on page 5
4. “Operation” on page 8
5. “Equipment” on page 12
6. “Maintenance” on page 16
7. “Shipping and Transportation” on page 19
DANGER!
Improper use of wheel loader could cause serious injury or death. Before operating wheel
loader, or performing maintenance, operator or technician must read and understand entire
Operation and Maintenance Manual.
Any operation, maintenance, traveling or shipping methods that do not follow safety guidelines
printed in this Manual could cause serious injury or death.
7. S0103000
Page 4
Wheel Loader Safety
Return to Master Table of Contents
LEARN SIGNAL WORDS USED WITH SAFETY ALERT SYMBOL
Words "CAUTION," "WARNING," and "DANGER" used throughout this manual and on labels on machine
indicate hazards or unsafe practices. All three statements indicate that safety is involved. Observe
precautions indicated whenever you see the Safety Alert "Triangle," no matter which signal word appears
next to the "Exclamation Point" symbol.
GENERAL SAFETY ESSENTIALS
ACCESSORY APPLICATIONS
Wheel loader has been designed primarily for moving earth with a bucket. For use as a grapple or for other
object handling, contact Daewoo. Lifting-work applications are permitted in approved lift configuration, to
rated capacity only, with no side-loading (unless prohibited by local regulation). Do not use machine for
activities for which it was not intended. Do not use bucket for lifting work, unless lift slings are used in
approved configuration.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety Instructions.
This is the Safety Alert Symbol. Wherever it appears - in this manual or on safety signs on the
machine - you should be alert to potential for personal injury or accidents. Always observe
safety precautions and follow recommended procedures.
CAUTION!
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. It
may also be used to alert against a generally unsafe practice.
WARNING!
Indicates a hazardous situation that, if not avoided, could result in serious injury or death. It may
also be used to alert against a highly unsafe practice.
DANGER!
Indicates a hazardous situation that, if not avoided, is very likely to cause death or extremely
serious injury. It may also be used to alert against equipment that may explode or detonate if
handled or treated carelessly.
8. S0103000
Page 5
Wheel Loader Safety
Return to Master Table of Contents
LOCATION OF SAFETY LABELS
Location of safety labels (decals) can vary from unit to unit. Refer to appropriate Operation and
Maintenance Manual, and Parts Manual for your unit.
Always replace damaged or faded decals.
UNAUTHORIZED MODIFICATIONS
Any modification made without authorization or written approval from Daewoo can create a safety hazard,
for which machine owner must be held responsible.
For safety’s sake, replace all OEM parts with correct authorized or genuine Daewoo part. For example, not
taking time to replace fasteners, bolts or nuts with correct replacement parts could lead to a condition in
which safety of critical assemblies is dangerously compromised.
WORK-SITE PRECAUTIONS
ATTACHMENT PRECAUTIONS
Options kits are available through your dealer. Contact Daewoo for information on available one-way
(single-acting) and two-way (double-acting) piping/valving/ auxiliary control kits. Because Daewoo cannot
anticipate, identify or test all attachments that owners may wish to install on their machines, please contact
Daewoo for authorization and approval of attachments, and their compatibility with options kits.
AVOID HIGH-VOLTAGE CABLES
Serious injury or death can result from contact
or proximity to high-voltage electric lines. The
bucket does not have to make physical contact
with power lines for current to be transmitted.
Use a spotter and hand signals to stay away
from power lines not clearly visible to operator.
IMPORTANT
If you need more information or have any questions or concerns about safe operating
procedures or working wheel loader correctly in a particular application or in specific conditions
of your individual operating environment, please consult your local Daewoo representative.
VOLTAGE MINIMUM SAFE
DISTANCE
6.6kV 3 m (9' - 10'')
33.0kV 4 m (13' - 1'')
66.0kV 5 m (16' - 5'')
154.0kV 8 m (26' - 3'')
275.0kV 10 m (32' - 10'')
Figure 1
9. S0103000
Page 6
Wheel Loader Safety
Return to Master Table of Contents
Use these minimum distances as a guideline only. Depending upon voltage in line and atmospheric
conditions, strong current shocks can occur with boom or bucket as far away as 4 - 6 m (13 - 20 ft) from
power line. Very high voltage and rainy weather could further decrease that safety margin.
NOTE: Before starting any type of operation near power lines (either above ground or buried
cable-type) you should always contact power utility directly and work out a safety plan with
them.
BEFORE STARTING TO DIG, CONTACT AUTHORITIES
Below ground hazards also include natural gas lines, water mains, tunnels and buried foundations. Know
what’s underneath work site before starting to dig.
BE AWARE OF HEIGHT OBSTACLES
Any type of object in vicinity of boom could represent a potential hazard, or cause operator to react
suddenly and cause an accident. Use a spotter or signal person working near bridges, phone lines, work
site scaffolds, or other obstructions.
USE CARE ON LOOSE SUPPORT
Working heavy loads over loose, soft ground or uneven, broken terrain can cause dangerous side load
conditions and possible tipover and injury. Travel without a load or balanced load may also be hazardous.
If temperatures are changing, be cautious of dark and wet patches when working or traveling over frozen
ground. Stay away from ditches, overhangs and all other weak support surfaces. Halt work and install
support mats or blocking if work is required in an area of poor support.
USE SOLID SUPPORT BLOCKING
Never rely on lift jacks or other inadequate supports when work is being done. Block wheels fore and aft to
prevent any movement.
DIGGING BENEATH OVERHANGS
Digging beneath an overhang is dangerous. Overhand could collapse on top of operator and cause serious
injury or death. Go on to another digging area before steep overhangs are formed. Know height and reach
limits of wheel loader and plan ahead while working. Park wheel loader away from overhangs before work
shutdown.
DIGGING BENEATH WHEEL LOADER
Digging beneath wheel loader is dangerous. Earth beneath could collapse. This could cause wheel loader
to tip, which could cause serious injury or death to operator. Working around deep pits, trenching or along
high walls may require support blocks, especially after heavy rainfalls or during spring thaws.
10. S0103000
Page 7
Wheel Loader Safety
Return to Master Table of Contents
SLOPING TERRAIN REQUIRES CAUTION
Dig evenly around work site whenever possible,
trying to gradually level any existing slope. If it’s
not possible to level area or avoid working on a
slope, reducing size and cycling rate workload is
recommended.
On sloping surfaces, use caution when
positioning wheel loader prior to starting a work
cycle. Stay alert for instability situations in order
to avoid getting into them. For example, you
should always avoid working bucket over
downhill side of machine when parked
perpendicular to slope. Avoid full extensions of
bucket in a downhill direction. Lifting bucket too
high, too close to machine, while wheel loader is
turned uphill can also be hazardous.
STAY ALERT FOR PEOPLE MOVING
THROUGH WORK AREA
When loading a truck you should always know
where the driver is.
Avoid loading over the cab of a truck even if the
driver is in a safe spot. Someone else could
have gone inside, for any number of reasons.
Avoid working where unseen passersby might
be.
Slow down work cycle and use slower travel
speeds in congested or populated areas. Use a
commonly understood signal so that other
members of work crew can warn operator to
slow or halt work in an impending hazardous
situation.
BE AWARE OF AND CONFORM TO LOCAL REGULATIONS
Minimum levels of insurance coverage, work permits or certification, physical barriers around work-site or
restricted hours of operation may be mandated by governing authorities. There may also be guidelines,
standards or restrictions on equipment that may be used to perform certain kinds of work. Check and
follow all local requirements, which may also be related to below ground hazards and power lines.
TURBO-II
20 ~ 30 cm
TURBO-II
20 ~ 30 cm
HAOA211L
Figure 2
HAOA171L
Figure 3
11. S0103000
Page 8
Wheel Loader Safety
Return to Master Table of Contents
OPERATION
OPERATE WHILE SEATED AT OPERATOR’S
STATION ONLY
Never reach in through a window to work a
control. Do not try to operate wheel loader
unless you’re in command position - seated at
controls. You should stay alert and focused on
your work at all times but Do not twist out of seat
if job activity behind you (or to the side) requires
your attention.
Use a spotter or signal person if you can not see
clearly and something is happening behind you.
Replace damaged safety labels and lost or
damaged operator’s manuals.
Do not let anyone operate machine unless
they’ve been fully and completely trained, in
safety and in operation of the machine.
BEFORE STARTING ENGINE, DO A "PRE-START" SAFETY CHECK:
• Walk around your machine before getting in operator’s cab. Look for evidence of leaking fluid,
loose fasteners, misaligned assemblies or any other indications of possible equipment hazard.
• All equipment covers and machinery safety guards must be in place, to protect against injury
while machine is being operated.
• Look around work site area for potential hazards, or people or property that could be at risk
while operation is in progress.
• Never start engine if there is any indication that maintenance or service work is in progress, or if
a warning tag is attached to controls in cab.
• A machine that has not been used recently, or is being operated in extremely cold temperatures,
could require a warm-up or maintenance service prior to start up.
• Check gauges and monitor displays for normal operation prior to starting engine. Listen for
unusual noises and remain alert for other potentially hazardous conditions at start of work cycle.
• Check tire inflation and check tires for damage or uneven wear. Perform maintenance before
operation.
HAOA151L
Figure 4
12. S0103000
Page 9
Wheel Loader Safety
Return to Master Table of Contents
NEVER USE ETHER STARTING AIDS
An electric-grid type manifold heater is used for
cold starting. Glowing heater element can cause
ether or other starting fluid to detonate, causing
injury.
MOUNTING AND DISMOUNTING
Never get on or off a moving machine. Do not
jump on/off. Entry/egress path should be clear
of mud, oil and spills and mounting hardware
must be kept tight and secure.
Always use handholds or steps and maintain at
least 3-point contact of hands and feet. Never
use controls as handholds.
Never get up from operator’s seat or leave
operator’s station and dismount machine if
engine is running.
OBSERVE GENERAL SAFETY RULES
Only trained and authorized personnel, with a good knowledge and awareness of safe procedures, may be
allowed to operate or perform maintenance or service on wheel loader.
All personnel at work site should be aware of assigned individual responsibilities and tasks.
Communication and hand signals used should be understood by everyone.
Terrain and soil conditions at job site, approaching traffic, weather-related hazards and any above or below
ground obstacles or hazards should be observed and monitored by all work crew members.
ENGINE VENTILATION
Engine exhaust gases can cause loss of
judgment, loss of alertness, and loss of motor
control. These gases can also cause
unconsciousness, serious injury and fatal
accidents.
Make sure of adequate ventilation before
starting engine in any enclosed area.
You should also be aware of open windows,
doors or ductwork into which exhaust may be
carried, or blown by wind, exposing others to
danger.
Figure 5
HLB1003L
Figure 6
;;;
;;;
HAOA070L
Figure 7
13. S0103000
Page 10
Wheel Loader Safety
Return to Master Table of Contents
ASBESTOS DUST HAZARD PREVENTION
Asbestos dust can be HAZARDOUS to your health if it is inhaled.
If you handle materials containing asbestos fibers, follow these guidelines as given below:
• Never use compressed air for cleaning.
• Use water for cleaning to keep down the dust.
• Work on the machine or component with the wind at your back whenever possible.
• Use an approved respirator.
TAKE TIME TO PROVIDE GOOD VISIBILITY
Halt work if visibility is poor. Strong rains, snow, fog and extremely dusty conditions can all obscure visibility
so badly that it is best to wait for weather to change or dust to settle before continuing operation.
Night work in areas of limited visibility should be halted if installation of extra work lights on machine (or
work area) is necessary.
Keep dirt and dust off of windows and off lens surfaces of work lights. Stop working if lights, windows or
mirrors need cleaning or adjustment.
FUEL, OIL AND HYDRAULIC FLUID FIRE
HAZARDS
Add fuel, oil, antifreeze and hydraulic fluid to
machine only in a well ventilated area. Machine
must be parked with controls, lights and
switches turned "OFF." Engine must be "OFF"
and any flames, glowing embers, auxiliary
heating units or spark-causing equipment must
be doused, turned "OFF" and/or kept well clear
of machine.
Static electricity can produce dangerous sparks
at fuel filling nozzle. In very cold, dry weather or
other conditions that could produce static
discharge, keep tip of fuel nozzle in constant
contact with neck of fuel filling nozzle, to provide
a ground.
Keep fuel and other fluid reservoir caps tight and
do not start engine until caps have been
secured.
HAOA120L
Figure 8
14. S0103000
Page 11
Wheel Loader Safety
Return to Master Table of Contents
BOOST STARTING OR CHARGING ENGINE
BATTERIES
Turn "OFF" all electrical equipment before
connecting leads to battery. This includes
electrical switches on battery charger or boost
starting equipment.
When boost-starting from another machine or
vehicle do not allow two machines to touch.
Wear safety glasses or goggles while required
parallel battery connections - positive to positive
and negative to negative - are made.
24 volt battery units consisting of two series-
connected twelve volt batteries have a cable
connecting one positive terminal on one of the
12 volt batteries to a negative terminal on the other battery. Booster or charger cable connections must be
made between non-series-connected positive terminals and between negative terminal of booster battery
and metal frame of machine being boosted or charged. Refer to procedure and illustration in Operation and
Maintenance Manual.
Connect positive cable first when installing cables and disconnect negative cable first when removing
them. Final cable connection, at metal frame of machine being charged or boost-started, should be as far
away from batteries as possible.
KEEP "PINCH POINT" AREAS CLEAR - USE
CAUTION IN REVERSE
Use a signal person in high traffic areas and
whenever operator’s view is not clear, such as
when traveling in reverse.
Anyone standing near wheels, or working
assemblies of the attachment, is at risk of being
caught between moving parts of machine.
Never allow anyone to ride on any part of
machine or attachment, including any part of
operator’s cab.
TRAVEL PRECAUTIONS
When traveling, wheel loader always keeps lights on; make sure that you are in compliance with all state
and local regulations concerning warning flags and signs.
Attachment control levers should not be operated while traveling.
Fold in work equipment so that outer end of boom is as close to machine as possible, and is 200 mm - 300
mm (8" - 12") above ground.
Never travel over obstacles or slopes that will cause machine to tilt severely. Travel around any slope or
obstacle that causes 10 degrees tilt, or more.
HAOA310L
Figure 9
HAOA191L
Figure 10
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. S0103000
Page 12
Wheel Loader Safety
Return to Master Table of Contents
OPERATE CAREFULLY ON SNOW AND ICE AND IN VERY COLD TEMPERATURES
In icy cold weather avoid sudden travel movements and stay away from even very slight slopes. Machine
could skid off to one side very easily.
Snow accumulation could hide or obscure potential hazards. Use care while operating or while using
machine to clear snow.
Warming up engine for a short period may be necessary, to avoid operating with sluggish or reduced
working capacity. Jolting shocks and impact loads caused by bumping or bottoming boom or attachment
are more likely to cause severe stress in very cold temperatures. Reducing work cycle rate and work load
may be necessary.
PARKING MACHINE
Avoid making sudden stops, or parking machine wherever it happens to be at the end of the work day. Plan
ahead so that the wheel loader will be on a firm, level surface away from traffic and away from high walls,
cliff edges and any area of potential water accumulation or runoff. If parking on inclines is unavoidable,
block wheels to prevent movement. Lower bucket or other working attachment completely to ground, or to
an overnight support saddle. There should be no possibility of unintended or accidental movement.
SHUTDOWN CONTROL FUNCTIONS
After bucket has been lowered to overnight storage position, move all switches and controls to "OFF"
position. Move parking brake switch to "LOCK" position. This will apply parking brake. Move pilot cutoff
switch to "LOCK" position. This will disable bucket control lever. Move key in starter switch to "OFF"
position, and remove key from switch.
Engage all lock-down security equipment that may have been installed on machine.
EQUIPMENT
ROUGH OPERATION MAY REQUIRE USE OF
CERTIFIED SAFETY EQUIPMENT
Work in mines, tunnels, deep pits or on loose or
wet surfaces could produce danger of falling
rock, roll over or hazardous flying objects.
Additional protection for operator’s cab could be
required in form of a FOPS/Falling Object
Protective Structure and/or ROPS/Roll Over
Protective Structure reinforcement system.
IMPORTANT
When hydraulic system maintenance or service work must be performed, be aware that
accumulators in system store fluid under pressure after system has been shutdown. To release
hydraulic pressure in accumulators, operate control with engine "OFF" until accumulator
pressure is completely dissipated.
HAOA110L
Figure 11
17. S0103000
Page 13
Wheel Loader Safety
Return to Master Table of Contents
Any reinforcement system that is installed on
machine must pass safety and certification
standards and carry appropriate labeling and
rating information. For example, most often
added type of reinforcement system, FOPS,
must meet or exceed Society of Automotive
Engineers standard SAE J1356, "Performance
Criteria for Falling Object Guards for Wheel
loaders."
Never attempt to alter or modify any type of
protective structure reinforcement system, by
drilling holes, welding or remounting or
relocating fasteners. Any serious impact or
damage to system requires a complete integrity
reevaluation. Reinstallation, recertification and/
or replacement of system may be necessary.
INSTALL ADDITIONAL SAFETY EQUIPMENT IF CONDITIONS REQUIRE
When working with a breaker or in some shear work applications, a front guard over windshield may be
required. Windshield guard may or may not be OPS/certified, depending upon the specific application and
working situation.
Laminate glass protection for the front, side or rear windows may also be recommended depending upon
particular site conditions.
Contact your Daewoo distributor for available safety guards and/or recommendations if there is any danger
of getting hit by objects that could strike the operator’s cab. Make sure that all other work site crew
members are kept well away from wheel loader and safe from potential hazards.
MOVEMENT ALARMS
If wheel loader is equipped with an audible travel movement alarm, test alarm on a daily basis. Audible
alarm should sound as soon as travel system is engaged.
SEAT BELTS SHOULD BE USED AT ALL
TIMES
Whenever engine is running, operator should be
seated at the control station with seat belt
properly engaged.
HAOA100L
Figure 12
Figure 13
18. S0103000
Page 14
Wheel Loader Safety
Return to Master Table of Contents
WINDOW GLASS BREAKING TOOL
This loader is equipped with a glass breaking
tool. It is located in the lower left side of the cab
just rear of the door. This tool can be used in
case of an emergency situation which requires
the breaking of glass to exit from the operator’s
cabin. Grip the handle firmly and use the sharp
point to break the glass.
KEEP A FIRE EXTINGUISHER AT HAND
It is recommended that an appropriately sized
(2.27 kg [5 lb] or larger) multi-purpose "A/B/C"
fire extinguisher be mounted in cab. Check and
service fire extinguisher at regular intervals and
make sure that all work site crew members are
adequately trained in its use.
MAINTAIN STANDARD SAFETY EQUIPMENT IN GOOD CONDITION
Machinery guards and body panel covers must be in place at all times. Keep well clear of rotating parts.
Pinch point hazards such as cooling fan and alternator drive belts could catch hair, jewelry or oversize or
very loose clothing.
Safety labels must be replaced if they are damaged or become unreadable. Information on labels gives
work crew members an important safety reminder. Part numbers for each decal and required mounting
locations are shown on pages 1-2 through 1-4 of this section.
SAFETY-CRITICAL PARTS MUST BE REPLACED PERIODICALLY
Replace following fire-related components as soon as they begin to show any sign of wear, or at regular
periodic intervals, whether or not deterioration is visible:
• Fuel system flexible hoses, the tank overflow drain hose and the fuel filler cap.
• Hydraulic system hoses, especially the pump outlet lines and front and rear pump branch
hoses.
• Keep mounting brackets and hose and cable routing straps tight. Hose routing should have
gradual bends.
HYDRAULIC CYLINDER SEALS REQUIRE PERIODIC REPLACEMENT
Check cylinder drift rate at regular intervals. Overhaul seal kits are available through Daewoo.
Figure 14
HAOA080L
Figure 15