- Daewoo reserves the right to improve its products at any time without obligation to update previously sold machines. Consumers should periodically check with distributors for documentation on purchased equipment.
- Safety labels and illustrations in manuals may vary between machines but are meant to represent actual equipment.
- Proper use and maintenance of safety procedures are essential for safe operation of the wheel loader. Unauthorized modifications can create safety hazards.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
Daewoo doosan solar 015 plus excavator service repair manualfujsjekfkkseme
1) The document provides safety information and guidelines for operating a Daewoo excavator, including general safety essentials, work-site precautions, operation, equipment, maintenance, and shipping/transportation.
2) It warns that unauthorized modifications could create safety hazards and that the excavator is designed for excavating and loading only, not lifting.
3) Guidelines are provided for avoiding power lines, contacting authorities before digging, being aware of overhead height obstacles, and using caution on loose ground.
Daewoo doosan solar 170 lc v excavator service repair manualfujsjekfkkseme
The document provides safety information and guidelines for operating a Daewoo excavator. It discusses general safety essentials, locating safety labels, worksite precautions, safe operation, equipment safety, maintenance safety, shipping/transportation safety, and lifting capacity. Key points include following all safety instructions, using equipment only as intended, understanding signal words in manuals/decals, checking local lifting regulations, and balancing and supporting loads evenly when lifting.
Daewoo doosan solar 175 lc v excavator service repair manualfujsjekfkkseme
The document provides the shop manual for a Daewoo Solar 175LC-V track excavator. It contains safety information, specifications, maintenance procedures, and troubleshooting guides for the various systems of the excavator. The manual is intended to instruct technicians on servicing and repairing the excavator. It addresses topics such as general safety, operating procedures, maintenance tasks, and diagnosing issues with the hydraulics, electrical, and other systems.
Daewoo doosan solar 75 v excavator service repair manualfujsjekfkkseme
The document provides operation and maintenance documentation for a Daewoo Solar 75-V track excavator. It includes safety information, specifications, maintenance procedures, and schematics for the upper structure, lower structure, engine/drive train, hydraulics, electrical system, and attachments. The documentation emphasizes safe operation and maintenance practices.
Claas talos 130 (type a38) tractor service repair manualfujsjekfkkseme
This document is a repair manual for a TALOS 130-120 tractor. It contains general information about using the manual, repair instructions, torque settings, technical specifications, and explanations of component numbering systems. The manual is organized by system (e.g. engine, transmission) and provides removal and installation instructions, specifications, and safety information for repairing and replacing components.
DAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Manual SN:1001 and Uphksemd ukejkfm
This is the Highly Detailed factory service repair manual for theDAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Publication number: 023-00064E
Serial Number: 1001 and Up
Service Repair Shop Manual Covers:
Safety
Specifications
General Maintenance
Upper Structure
Lower Structure and Chassis
Engine and Drive Train
Hydraulics
Electrical System
Attachments
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Daewoo doosan solar 160 w v wheel excavator service repair manualjkskjdkm
The document provides safety information for operating a Solar 140/160W-V wheel excavator, including:
1. General safety essentials and hazard information
2. Instructions on machine operation, maintenance, battery safety, towing, shipping, and lifting loads
3. Warnings to only allow trained personnel to operate the machine and to always follow safety rules and precautions outlined in the manual.
Doosan mega 400 v 400 v wheel loader service repair manual (serial number 100...jfdjjskfkksmemm
- Daewoo reserves the right to improve its products at any time without obligation to update previously sold products. Consumers should periodically check with distributors for documentation on purchased equipment.
- The shop manual covers specifications, maintenance procedures, and repair information for the Mega 400-V wheel loader, including safety guidelines, torque specifications, and hydraulic and electrical schematics.
- Illustrations in the manual are representational and may vary from the actual equipment. The manual is for serial numbers 1001 and up and was published in February 2001.
Daewoo doosan solar 015 plus excavator service repair manualfujsjekfkkseme
1) The document provides safety information and guidelines for operating a Daewoo excavator, including general safety essentials, work-site precautions, operation, equipment, maintenance, and shipping/transportation.
2) It warns that unauthorized modifications could create safety hazards and that the excavator is designed for excavating and loading only, not lifting.
3) Guidelines are provided for avoiding power lines, contacting authorities before digging, being aware of overhead height obstacles, and using caution on loose ground.
Daewoo doosan solar 170 lc v excavator service repair manualfujsjekfkkseme
The document provides safety information and guidelines for operating a Daewoo excavator. It discusses general safety essentials, locating safety labels, worksite precautions, safe operation, equipment safety, maintenance safety, shipping/transportation safety, and lifting capacity. Key points include following all safety instructions, using equipment only as intended, understanding signal words in manuals/decals, checking local lifting regulations, and balancing and supporting loads evenly when lifting.
Daewoo doosan solar 175 lc v excavator service repair manualfujsjekfkkseme
The document provides the shop manual for a Daewoo Solar 175LC-V track excavator. It contains safety information, specifications, maintenance procedures, and troubleshooting guides for the various systems of the excavator. The manual is intended to instruct technicians on servicing and repairing the excavator. It addresses topics such as general safety, operating procedures, maintenance tasks, and diagnosing issues with the hydraulics, electrical, and other systems.
Daewoo doosan solar 75 v excavator service repair manualfujsjekfkkseme
The document provides operation and maintenance documentation for a Daewoo Solar 75-V track excavator. It includes safety information, specifications, maintenance procedures, and schematics for the upper structure, lower structure, engine/drive train, hydraulics, electrical system, and attachments. The documentation emphasizes safe operation and maintenance practices.
Claas talos 130 (type a38) tractor service repair manualfujsjekfkkseme
This document is a repair manual for a TALOS 130-120 tractor. It contains general information about using the manual, repair instructions, torque settings, technical specifications, and explanations of component numbering systems. The manual is organized by system (e.g. engine, transmission) and provides removal and installation instructions, specifications, and safety information for repairing and replacing components.
DAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Manual SN:1001 and Uphksemd ukejkfm
This is the Highly Detailed factory service repair manual for theDAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.DAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Publication number: 023-00064E
Serial Number: 1001 and Up
Service Repair Shop Manual Covers:
Safety
Specifications
General Maintenance
Upper Structure
Lower Structure and Chassis
Engine and Drive Train
Hydraulics
Electrical System
Attachments
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveDAEWOO DOOSAN SOLAR 210W-V WHEEL EXCAVATOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Daewoo doosan solar 160 w v wheel excavator service repair manualjkskjdkm
The document provides safety information for operating a Solar 140/160W-V wheel excavator, including:
1. General safety essentials and hazard information
2. Instructions on machine operation, maintenance, battery safety, towing, shipping, and lifting loads
3. Warnings to only allow trained personnel to operate the machine and to always follow safety rules and precautions outlined in the manual.
Steyr profi 4110 classic et tractor service repair manualjfdjjskekksemm
This document is a service manual that provides information for servicing various PROFI tractor models. It includes sections on the engine, transmission, axles, hydraulics, steering, climate control, electrical systems, and other components. The manual lists specific part numbers and product links to engine models. It also includes an index of contents that lists subsections with their corresponding page numbers to provide detailed servicing information for the different systems.
Steyr profi 4110 et tractor service repair manualjfdjjskekksemm
This document is a service manual that provides information for servicing various PROFI tractor models. It includes sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and specifications to service components of these systems.
Steyr f4 hfe613g tier 4b (final) engine service repair manualjfdjjskekksemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Steyr f4 hfe613h tier 4b (final) engine service repair manualjfdjjskekksemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Steyr f4 dfe4132 tier 4b (final) engine service repair manualjfdjjskekksemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr f4 dfe4133 tier 4b (final) engine service repair manualjfdjjskekksemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr 4095 multi et tractor service repair manualjfdjjskekksemm
The fuel tank is removed from tractors by first draining the fuel, disconnecting electrical connectors and removing mounting bolts. The 4WD cover must also be removed by taking off nuts, clamps and bolts in order to access and remove the fuel tank. Safety precautions are required when handling fuel.
Steyr 4105 multi et tractor service repair manualjfdjjskekksemm
The fuel tank is removed from tractors by first draining the fuel, disconnecting electrical connectors and removing mounting bolts. The 4WD cover must also be removed by taking off nuts, clamps and bolts in order to access and remove the fuel tank. Safety precautions are required when handling fuel.
New holland e225 bsr rops tier iii crawler excavator service repair manualjfdjjskekksemm
This document provides safety precautions and instructions for servicing a ROPS Tier III Crawler Excavator. It outlines general safety information, including warnings about operating or maintaining the machine without understanding the operator's and service manuals. It lists 21 basic precautions for servicing the machine safely, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and lifting heavy components carefully. The document emphasizes operating, inspecting and repairing the machine safely.
Case ih farmall 120 u tractor service repair manualjfdjjskekksemm
This service manual section provides information for servicing the engine, clutch, transmission, drivetrain, brakes, hydraulics, hitches, frames, steering, wheels, climate control, and electrical systems for Case IH Farmall 110U and 120U tractors. The document includes specifications, component locations, maintenance procedures, and torque values.
Case ih farmall 110 v tier 4a (interim) tractor service repair manualjfdjjskekksemm
This document is a service manual for Case IH Farmall tractors models 80N, 80V, 90N, 90V, 100N, 100V, 110N, and 110V. It provides specifications and repair/maintenance instructions for the tractor engines, transmissions, axles, hydraulics, electrical systems, and other components. The manual is published by CNH Industrial Italia S.p.A and is intended as a reference for tractor service technicians.
Case ih farmall 110 um tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 110U and 120U tractors with 16x16 semi-powershift transmissions. It contains over 55 sections that provide information on the engine, transmission, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH Industrial and is intended to assist technicians with servicing and repairing the tractors.
Case ih farmall 95 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Case ih farmall 95 u efficient power tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 95U, 105U, and 115U tractors. It contains over 50 sections covering all major tractor systems and components, including the engine, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, and electrical systems. Safety rules are outlined at the beginning, emphasizing the importance of following proper procedures, wearing protective equipment, and taking precautions such as disabling the tractor before performing maintenance.
Case ih farmall 110 n tier 4a (interim) tractor service repair manualjfdjjskekksemm
This document is a service manual for Case IH Farmall tractors models 80N, 80V, 90N, 90V, 100N, 100V, 110N, and 110V. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual provides information for technicians to service and repair parts and systems on the tractors. Safety warnings are included regarding working on air conditioning systems and general safety practices for working on the machines.
Case ih farmall 75 n with cab tier 3 tractor service repair manual pin z8jf19...jfdjjskekksemm
This document is a service manual for various Farmall tractor models, including the Farmall 105N, 105V, 75N, 85N, and 95N. It contains sections covering the tractor engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and specifications to service and repair components of the tractors.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Case ih farmall 105 u efficient power tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 95U, 105U, and 115U tractors. It contains over 50 sections covering all major tractor systems and components, including the engine, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, and electrical systems. Safety rules are outlined at the beginning, emphasizing the importance of following proper procedures, wearing protective equipment, and taking precautions such as disabling the tractor before performing maintenance.
Case ih farmall 55 c tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 55C, 65C, and 75C tractors. It contains instructions for maintenance, repair, and adjustments of various tractor systems. The manual is divided into sections for different components and systems, such as the engine, transmission, brakes, hydraulics, steering, and others. Safety warnings are provided, noting that maintenance should only be performed by trained technicians using the proper tools and procedures.
Case ih farmall 50 a tier 4b (final) tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 50A, 60A, and 70A compact tractors with Tier 4B (final) engines. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, electrical systems, and the platform, cab, bodywork and decals. The introduction provides forewords on ecology and the environment, recommending safe and proper storage, use, and disposal of fuels, oils, coolants and other substances.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Steyr profi 4110 classic et tractor service repair manualjfdjjskekksemm
This document is a service manual that provides information for servicing various PROFI tractor models. It includes sections on the engine, transmission, axles, hydraulics, steering, climate control, electrical systems, and other components. The manual lists specific part numbers and product links to engine models. It also includes an index of contents that lists subsections with their corresponding page numbers to provide detailed servicing information for the different systems.
Steyr profi 4110 et tractor service repair manualjfdjjskekksemm
This document is a service manual that provides information for servicing various PROFI tractor models. It includes sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, hitches and couplings, frames and ballasting, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and specifications to service components of these systems.
Steyr f4 hfe613g tier 4b (final) engine service repair manualjfdjjskekksemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Steyr f4 hfe613h tier 4b (final) engine service repair manualjfdjjskekksemm
This document is a service manual for Tier 4B (final) engines. It provides model numbers for engines covered and copyright information. The manual contains sections on the engine, electrical systems, and introduction/safety information. Model numbers and part numbers are listed for components covered in the manual.
Steyr f4 dfe4132 tier 4b (final) engine service repair manualjfdjjskekksemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr f4 dfe4133 tier 4b (final) engine service repair manualjfdjjskekksemm
This document contains a service manual for Tier 4B (final) engines. It includes sections on the engine, electrical systems, and safety information. The manual provides maintenance and repair instructions for technicians, with the goal of ensuring personal safety and preventing damage to equipment. It lists many engine part numbers and cautions technicians to only perform work according to the procedures in the manual using recommended tools.
Steyr 4095 multi et tractor service repair manualjfdjjskekksemm
The fuel tank is removed from tractors by first draining the fuel, disconnecting electrical connectors and removing mounting bolts. The 4WD cover must also be removed by taking off nuts, clamps and bolts in order to access and remove the fuel tank. Safety precautions are required when handling fuel.
Steyr 4105 multi et tractor service repair manualjfdjjskekksemm
The fuel tank is removed from tractors by first draining the fuel, disconnecting electrical connectors and removing mounting bolts. The 4WD cover must also be removed by taking off nuts, clamps and bolts in order to access and remove the fuel tank. Safety precautions are required when handling fuel.
New holland e225 bsr rops tier iii crawler excavator service repair manualjfdjjskekksemm
This document provides safety precautions and instructions for servicing a ROPS Tier III Crawler Excavator. It outlines general safety information, including warnings about operating or maintaining the machine without understanding the operator's and service manuals. It lists 21 basic precautions for servicing the machine safely, such as wearing protective equipment, relieving pressure from systems before disconnecting lines, and lifting heavy components carefully. The document emphasizes operating, inspecting and repairing the machine safely.
Case ih farmall 120 u tractor service repair manualjfdjjskekksemm
This service manual section provides information for servicing the engine, clutch, transmission, drivetrain, brakes, hydraulics, hitches, frames, steering, wheels, climate control, and electrical systems for Case IH Farmall 110U and 120U tractors. The document includes specifications, component locations, maintenance procedures, and torque values.
Case ih farmall 110 v tier 4a (interim) tractor service repair manualjfdjjskekksemm
This document is a service manual for Case IH Farmall tractors models 80N, 80V, 90N, 90V, 100N, 100V, 110N, and 110V. It provides specifications and repair/maintenance instructions for the tractor engines, transmissions, axles, hydraulics, electrical systems, and other components. The manual is published by CNH Industrial Italia S.p.A and is intended as a reference for tractor service technicians.
Case ih farmall 110 um tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 110U and 120U tractors with 16x16 semi-powershift transmissions. It contains over 55 sections that provide information on the engine, transmission, hydraulics, electrical systems, and other components of the tractors. The manual is published by CNH Industrial and is intended to assist technicians with servicing and repairing the tractors.
Case ih farmall 95 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Case ih farmall 95 u efficient power tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 95U, 105U, and 115U tractors. It contains over 50 sections covering all major tractor systems and components, including the engine, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, and electrical systems. Safety rules are outlined at the beginning, emphasizing the importance of following proper procedures, wearing protective equipment, and taking precautions such as disabling the tractor before performing maintenance.
Case ih farmall 110 n tier 4a (interim) tractor service repair manualjfdjjskekksemm
This document is a service manual for Case IH Farmall tractors models 80N, 80V, 90N, 90V, 100N, 100V, 110N, and 110V. It contains sections covering the engine, transmission, axles, hydraulics, electrical systems, and other components. The manual provides information for technicians to service and repair parts and systems on the tractors. Safety warnings are included regarding working on air conditioning systems and general safety practices for working on the machines.
Case ih farmall 75 n with cab tier 3 tractor service repair manual pin z8jf19...jfdjjskekksemm
This document is a service manual for various Farmall tractor models, including the Farmall 105N, 105V, 75N, 85N, and 95N. It contains sections covering the tractor engine, clutch, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, cab climate control, and electrical systems. The manual provides part numbers and specifications to service and repair components of the tractors.
Case ih farmall 105 u ep tractor service repair manualjfdjjskekksemm
The document provides specifications for the engines used in Case IH Farmall 95U, 105U, and 115U tractors. The engines are 4-cylinder diesel engines with direct fuel injection. Key specifications include displacement of 3400 cm3, compression ratio of 17:1, maximum power outputs ranging from 73 kW to 84 kW, and peak torque values ranging from 407 Nm to 461 Nm. Additional details are provided on engine components and systems like cooling, lubrication, and timing.
Case ih farmall 105 u efficient power tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 95U, 105U, and 115U tractors. It contains over 50 sections covering all major tractor systems and components, including the engine, transmission, four-wheel drive system, front and rear axles, power take-off, brakes, hydraulics, hitches, steering, wheels, and electrical systems. Safety rules are outlined at the beginning, emphasizing the importance of following proper procedures, wearing protective equipment, and taking precautions such as disabling the tractor before performing maintenance.
Case ih farmall 55 c tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 55C, 65C, and 75C tractors. It contains instructions for maintenance, repair, and adjustments of various tractor systems. The manual is divided into sections for different components and systems, such as the engine, transmission, brakes, hydraulics, steering, and others. Safety warnings are provided, noting that maintenance should only be performed by trained technicians using the proper tools and procedures.
Case ih farmall 50 a tier 4b (final) tractor service repair manualjfdjjskekksemm
This document is a service manual for Farmall 50A, 60A, and 70A compact tractors with Tier 4B (final) engines. It contains sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, electrical systems, and the platform, cab, bodywork and decals. The introduction provides forewords on ecology and the environment, recommending safe and proper storage, use, and disposal of fuels, oils, coolants and other substances.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Daewoo doosan mega 160 tc wheel loader service repair manual sn 1001 and up
1. 023-00035E Shop Manual
Daewoo reserves the right to improve our products in a continuing process to provide the best possible
product to the market place. These improvements can be implemented at any time with no obligation to
change materials on previously sold products. It is recommended that consumers periodically contact their
distributors for recent documentation on purchased equipment.
This documentation may include attachments and optional equipment that is not available in your
machine’s package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Shop Manual
023-00035E
Mega 160 S/N 1021 and Up
Mega 160TC S/N 1001 and Up
March 2001
Mega 160 / 160TC
2. Table of Contents
Page I
1TABLE OF CONTENTS
Return to Master Table of Contents
Safety
Wheel Loader Safety .............................................................................S0103000
Specifications
Specifications for Mega 160 / 160TC.....................................................S0203050
General Maintenance
General Maintenance Procedures.........................................................S0302000
Standard Torques..................................................................................S0309000
Upper Structure
Counterweight........................................................................................S0403020
Fuel Transfer Pump...............................................................................S0405500
Hydraulic oil tank ...................................................................................S0406020
Lower Structure and Chassis
Center Joint (Articulation Joint)..............................................................S0502000
Engine and Drive Train
Axle (Clark-Hurth)..................................................................................S0602000
Air-Conditioner.................................................................................... S0605050K
Transmission (ZF 4WG130) ..................................................................S0607060
Transmission Error Codes (ZF) .......................................................... S0607900C
Wheel Assembly....................................................................................S0608000
Hydraulics
Hydraulic System...................................................................................S0702160
Accumulator...........................................................................................S0703000
Cylinders................................................................................................S0705010
3. Table of Contents
Page II
Pilot Pump (John S. Barnes) .................................................................S0708440
Main Pump (Haldex G20 and G30 Series) ............................................S0708450
Main Control Valve (Husco)...................................................................S0709445
Brake and Pilot Supply Valve ................................................................S0709525
Pilot Control Valve Lever .......................................................................S0709530
Option Solenoid Valve ...........................................................................S0709535
Priority Valve..........................................................................................S0709650
Power Steering Unit...............................................................................S0709720
Hydraulic Schematic (Mega 160)...........................................................S0793030
Electrical System
Electrical System ...................................................................................S0802170
Electrical Schematic (Mega 160)...........................................................S0893030
Attachments
Loader Arm Assembly ...........................................................................S0904010
5. S0103000
Page 2
Wheel Loader Safety
Return to Master Table of Contents
TABLE OF CONTENTS
To the Operator of a Daewoo Wheel Loader..................................................3
General Safety Essentials ..............................................................................4
Location of Safety Labels............................................................................... 5
Unauthorized Modifications............................................................................ 5
Work-Site Precautions.................................................................................... 5
Operation........................................................................................................ 8
Equipment .................................................................................................... 12
Maintenance................................................................................................. 16
Shipping and Transportation ........................................................................ 19
6. S0103000
Page 3
Wheel Loader Safety
Return to Master Table of Contents
TO THE OPERATOR OF A DAEWOO WHEEL LOADER
Please respect the importance of taking responsibility for your own safety, and that other people who may
be affected by your actions.
Safety information on the following pages is organized into the following topics.
1. “General Safety Essentials” on page 4
2. “Location of Safety Labels” on page 5
3. “Unauthorized Modifications” on page 5
4. “Operation” on page 8
5. “Equipment” on page 12
6. “Maintenance” on page 16
7. “Shipping and Transportation” on page 19
DANGER!
Improper use of wheel loader could cause serious injury or death. Before operating wheel
loader, or performing maintenance, operator or technician must read and understand entire
Operation and Maintenance Manual.
Any operation, maintenance, traveling or shipping methods that do not follow safety guidelines
printed in this Manual could cause serious injury or death.
7. S0103000
Page 4
Wheel Loader Safety
Return to Master Table of Contents
LEARN SIGNAL WORDS USED WITH SAFETY ALERT SYMBOL
Words "CAUTION," "WARNING," and "DANGER" used throughout this manual and on labels on machine
indicate hazards or unsafe practices. All three statements indicate that safety is involved. Observe
precautions indicated whenever you see the Safety Alert "Triangle," no matter which signal word appears
next to the "Exclamation Point" symbol.
GENERAL SAFETY ESSENTIALS
ACCESSORY APPLICATIONS
Wheel loader has been designed primarily for moving earth with a bucket. For use as a grapple or for other
object handling, contact Daewoo. Lifting-work applications are permitted in approved lift configuration, to
rated capacity only, with no side-loading (unless prohibited by local regulation). Do not use machine for
activities for which it was not intended. Do not use bucket for lifting work, unless lift slings are used in
approved configuration.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety Instructions.
This is the Safety Alert Symbol. Wherever it appears - in this manual or on safety signs on the
machine - you should be alert to potential for personal injury or accidents. Always observe
safety precautions and follow recommended procedures.
CAUTION!
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury. It
may also be used to alert against a generally unsafe practice.
WARNING!
Indicates a hazardous situation that, if not avoided, could result in serious injury or death. It may
also be used to alert against a highly unsafe practice.
DANGER!
Indicates a hazardous situation that, if not avoided, is very likely to cause death or extremely
serious injury. It may also be used to alert against equipment that may explode or detonate if
handled or treated carelessly.
8. S0103000
Page 5
Wheel Loader Safety
Return to Master Table of Contents
LOCATION OF SAFETY LABELS
Location of safety labels (decals) can vary from unit to unit. Refer to appropriate Operation and
Maintenance Manual, and Parts Manual for your unit.
Always replace damaged or faded decals.
UNAUTHORIZED MODIFICATIONS
Any modification made without authorization or written approval from Daewoo can create a safety hazard,
for which machine owner must be held responsible.
For safety’s sake, replace all OEM parts with correct authorized or genuine Daewoo part. For example, not
taking time to replace fasteners, bolts or nuts with correct replacement parts could lead to a condition in
which safety of critical assemblies is dangerously compromised.
WORK-SITE PRECAUTIONS
ATTACHMENT PRECAUTIONS
Options kits are available through your dealer. Contact Daewoo for information on available one-way
(single-acting) and two-way (double-acting) piping/valving/ auxiliary control kits. Because Daewoo cannot
anticipate, identify or test all attachments that owners may wish to install on their machines, please contact
Daewoo for authorization and approval of attachments, and their compatibility with options kits.
AVOID HIGH-VOLTAGE CABLES
Serious injury or death can result from contact
or proximity to high-voltage electric lines. The
bucket does not have to make physical contact
with power lines for current to be transmitted.
Use a spotter and hand signals to stay away
from power lines not clearly visible to operator.
IMPORTANT
If you need more information or have any questions or concerns about safe operating
procedures or working wheel loader correctly in a particular application or in specific conditions
of your individual operating environment, please consult your local Daewoo representative.
VOLTAGE MINIMUM SAFE
DISTANCE
6.6kV 3 m (9' - 10'')
33.0kV 4 m (13' - 1'')
66.0kV 5 m (16' - 5'')
154.0kV 8 m (26' - 3'')
275.0kV 10 m (32' - 10'')
Figure 1
9. S0103000
Page 6
Wheel Loader Safety
Return to Master Table of Contents
Use these minimum distances as a guideline only. Depending upon voltage in line and atmospheric
conditions, strong current shocks can occur with boom or bucket as far away as 4 - 6 m (13 - 20 ft) from
power line. Very high voltage and rainy weather could further decrease that safety margin.
NOTE: Before starting any type of operation near power lines (either above ground or buried
cable-type) you should always contact power utility directly and work out a safety plan with
them.
BEFORE STARTING TO DIG, CONTACT AUTHORITIES
Below ground hazards also include natural gas lines, water mains, tunnels and buried foundations. Know
what’s underneath work site before starting to dig.
BE AWARE OF HEIGHT OBSTACLES
Any type of object in vicinity of boom could represent a potential hazard, or cause operator to react
suddenly and cause an accident. Use a spotter or signal person working near bridges, phone lines, work
site scaffolds, or other obstructions.
USE CARE ON LOOSE SUPPORT
Working heavy loads over loose, soft ground or uneven, broken terrain can cause dangerous side load
conditions and possible tipover and injury. Travel without a load or balanced load may also be hazardous.
If temperatures are changing, be cautious of dark and wet patches when working or traveling over frozen
ground. Stay away from ditches, overhangs and all other weak support surfaces. Halt work and install
support mats or blocking if work is required in an area of poor support.
USE SOLID SUPPORT BLOCKING
Never rely on lift jacks or other inadequate supports when work is being done. Block wheels fore and aft to
prevent any movement.
DIGGING BENEATH OVERHANGS
Digging beneath an overhang is dangerous. Overhand could collapse on top of operator and cause serious
injury or death. Go on to another digging area before steep overhangs are formed. Know height and reach
limits of wheel loader and plan ahead while working. Park wheel loader away from overhangs before work
shutdown.
DIGGING BENEATH WHEEL LOADER
Digging beneath wheel loader is dangerous. Earth beneath could collapse. This could cause wheel loader
to tip, which could cause serious injury or death to operator. Working around deep pits, trenching or along
high walls may require support blocks, especially after heavy rainfalls or during spring thaws.
10. S0103000
Page 7
Wheel Loader Safety
Return to Master Table of Contents
SLOPING TERRAIN REQUIRES CAUTION
Dig evenly around work site whenever possible,
trying to gradually level any existing slope. If it’s
not possible to level area or avoid working on a
slope, reducing size and cycling rate workload is
recommended.
On sloping surfaces, use caution when
positioning wheel loader prior to starting a work
cycle. Stay alert for instability situations in order
to avoid getting into them. For example, you
should always avoid working bucket over
downhill side of machine when parked
perpendicular to slope. Avoid full extensions of
bucket in a downhill direction. Lifting bucket too
high, too close to machine, while wheel loader is
turned uphill can also be hazardous.
STAY ALERT FOR PEOPLE MOVING
THROUGH WORK AREA
When loading a truck you should always know
where the driver is.
Avoid loading over the cab of a truck even if the
driver is in a safe spot. Someone else could
have gone inside, for any number of reasons.
Avoid working where unseen passersby might
be.
Slow down work cycle and use slower travel
speeds in congested or populated areas. Use a
commonly understood signal so that other
members of work crew can warn operator to
slow or halt work in an impending hazardous
situation.
BE AWARE OF AND CONFORM TO LOCAL REGULATIONS
Minimum levels of insurance coverage, work permits or certification, physical barriers around work-site or
restricted hours of operation may be mandated by governing authorities. There may also be guidelines,
standards or restrictions on equipment that may be used to perform certain kinds of work. Check and
follow all local requirements, which may also be related to below ground hazards and power lines.
TURBO-II
20 ~ 30 cm
TURBO-II
20 ~ 30 cm
HAOA211L
Figure 2
HAOA171L
Figure 3
11. S0103000
Page 8
Wheel Loader Safety
Return to Master Table of Contents
OPERATION
OPERATE WHILE SEATED AT OPERATOR’S
STATION ONLY
Never reach in through a window to work a
control. Do not try to operate wheel loader
unless you’re in command position - seated at
controls. You should stay alert and focused on
your work at all times but Do not twist out of seat
if job activity behind you (or to the side) requires
your attention.
Use a spotter or signal person if you can not see
clearly and something is happening behind you.
Replace damaged safety labels and lost or
damaged operator’s manuals.
Do not let anyone operate machine unless
they’ve been fully and completely trained, in
safety and in operation of the machine.
BEFORE STARTING ENGINE, DO A "PRE-START" SAFETY CHECK:
• Walk around your machine before getting in operator’s cab. Look for evidence of leaking fluid,
loose fasteners, misaligned assemblies or any other indications of possible equipment hazard.
• All equipment covers and machinery safety guards must be in place, to protect against injury
while machine is being operated.
• Look around work site area for potential hazards, or people or property that could be at risk
while operation is in progress.
• Never start engine if there is any indication that maintenance or service work is in progress, or if
a warning tag is attached to controls in cab.
• A machine that has not been used recently, or is being operated in extremely cold temperatures,
could require a warm-up or maintenance service prior to start up.
• Check gauges and monitor displays for normal operation prior to starting engine. Listen for
unusual noises and remain alert for other potentially hazardous conditions at start of work cycle.
• Check tire inflation and check tires for damage or uneven wear. Perform maintenance before
operation.
HAOA151L
Figure 4
12. S0103000
Page 9
Wheel Loader Safety
Return to Master Table of Contents
NEVER USE ETHER STARTING AIDS
An electric-grid type manifold heater is used for
cold starting. Glowing heater element can cause
ether or other starting fluid to detonate, causing
injury.
MOUNTING AND DISMOUNTING
Never get on or off a moving machine. Do not
jump on/off. Entry/egress path should be clear
of mud, oil and spills and mounting hardware
must be kept tight and secure.
Always use handholds or steps and maintain at
least 3-point contact of hands and feet. Never
use controls as handholds.
Never get up from operator’s seat or leave
operator’s station and dismount machine if
engine is running.
OBSERVE GENERAL SAFETY RULES
Only trained and authorized personnel, with a good knowledge and awareness of safe procedures, may be
allowed to operate or perform maintenance or service on wheel loader.
All personnel at work site should be aware of assigned individual responsibilities and tasks.
Communication and hand signals used should be understood by everyone.
Terrain and soil conditions at job site, approaching traffic, weather-related hazards and any above or below
ground obstacles or hazards should be observed and monitored by all work crew members.
ENGINE VENTILATION
Engine exhaust gases can cause loss of
judgment, loss of alertness, and loss of motor
control. These gases can also cause
unconsciousness, serious injury and fatal
accidents.
Make sure of adequate ventilation before
starting engine in any enclosed area.
You should also be aware of open windows,
doors or ductwork into which exhaust may be
carried, or blown by wind, exposing others to
danger.
Figure 5
HLB1003L
Figure 6
;;;
;;;
HAOA070L
Figure 7
13. S0103000
Page 10
Wheel Loader Safety
Return to Master Table of Contents
ASBESTOS DUST HAZARD PREVENTION
Asbestos dust can be HAZARDOUS to your health if it is inhaled.
If you handle materials containing asbestos fibers, follow these guidelines as given below:
• Never use compressed air for cleaning.
• Use water for cleaning to keep down the dust.
• Work on the machine or component with the wind at your back whenever possible.
• Use an approved respirator.
TAKE TIME TO PROVIDE GOOD VISIBILITY
Halt work if visibility is poor. Strong rains, snow, fog and extremely dusty conditions can all obscure visibility
so badly that it is best to wait for weather to change or dust to settle before continuing operation.
Night work in areas of limited visibility should be halted if installation of extra work lights on machine (or
work area) is necessary.
Keep dirt and dust off of windows and off lens surfaces of work lights. Stop working if lights, windows or
mirrors need cleaning or adjustment.
FUEL, OIL AND HYDRAULIC FLUID FIRE
HAZARDS
Add fuel, oil, antifreeze and hydraulic fluid to
machine only in a well ventilated area. Machine
must be parked with controls, lights and
switches turned "OFF." Engine must be "OFF"
and any flames, glowing embers, auxiliary
heating units or spark-causing equipment must
be doused, turned "OFF" and/or kept well clear
of machine.
Static electricity can produce dangerous sparks
at fuel filling nozzle. In very cold, dry weather or
other conditions that could produce static
discharge, keep tip of fuel nozzle in constant
contact with neck of fuel filling nozzle, to provide
a ground.
Keep fuel and other fluid reservoir caps tight and
do not start engine until caps have been
secured.
HAOA120L
Figure 8
14. S0103000
Page 11
Wheel Loader Safety
Return to Master Table of Contents
BOOST STARTING OR CHARGING ENGINE
BATTERIES
Turn "OFF" all electrical equipment before
connecting leads to battery. This includes
electrical switches on battery charger or boost
starting equipment.
When boost-starting from another machine or
vehicle do not allow two machines to touch.
Wear safety glasses or goggles while required
parallel battery connections - positive to positive
and negative to negative - are made.
24 volt battery units consisting of two series-
connected twelve volt batteries have a cable
connecting one positive terminal on one of the
12 volt batteries to a negative terminal on the other battery. Booster or charger cable connections must be
made between non-series-connected positive terminals and between negative terminal of booster battery
and metal frame of machine being boosted or charged. Refer to procedure and illustration in Operation and
Maintenance Manual.
Connect positive cable first when installing cables and disconnect negative cable first when removing
them. Final cable connection, at metal frame of machine being charged or boost-started, should be as far
away from batteries as possible.
KEEP "PINCH POINT" AREAS CLEAR - USE
CAUTION IN REVERSE
Use a signal person in high traffic areas and
whenever operator’s view is not clear, such as
when traveling in reverse.
Anyone standing near wheels, or working
assemblies of the attachment, is at risk of being
caught between moving parts of machine.
Never allow anyone to ride on any part of
machine or attachment, including any part of
operator’s cab.
TRAVEL PRECAUTIONS
When traveling, wheel loader always keeps lights on; make sure that you are in compliance with all state
and local regulations concerning warning flags and signs.
Attachment control levers should not be operated while traveling.
Fold in work equipment so that outer end of boom is as close to machine as possible, and is 200 mm - 300
mm (8" - 12") above ground.
Never travel over obstacles or slopes that will cause machine to tilt severely. Travel around any slope or
obstacle that causes 10 degrees tilt, or more.
HAOA310L
Figure 9
HAOA191L
Figure 10
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. S0103000
Page 12
Wheel Loader Safety
Return to Master Table of Contents
OPERATE CAREFULLY ON SNOW AND ICE AND IN VERY COLD TEMPERATURES
In icy cold weather avoid sudden travel movements and stay away from even very slight slopes. Machine
could skid off to one side very easily.
Snow accumulation could hide or obscure potential hazards. Use care while operating or while using
machine to clear snow.
Warming up engine for a short period may be necessary, to avoid operating with sluggish or reduced
working capacity. Jolting shocks and impact loads caused by bumping or bottoming boom or attachment
are more likely to cause severe stress in very cold temperatures. Reducing work cycle rate and work load
may be necessary.
PARKING MACHINE
Avoid making sudden stops, or parking machine wherever it happens to be at the end of the work day. Plan
ahead so that the wheel loader will be on a firm, level surface away from traffic and away from high walls,
cliff edges and any area of potential water accumulation or runoff. If parking on inclines is unavoidable,
block wheels to prevent movement. Lower bucket or other working attachment completely to ground, or to
an overnight support saddle. There should be no possibility of unintended or accidental movement.
SHUTDOWN CONTROL FUNCTIONS
After bucket has been lowered to overnight storage position, move all switches and controls to "OFF"
position. Move parking brake switch to "LOCK" position. This will apply parking brake. Move pilot cutoff
switch to "LOCK" position. This will disable bucket control lever. Move key in starter switch to "OFF"
position, and remove key from switch.
Engage all lock-down security equipment that may have been installed on machine.
EQUIPMENT
ROUGH OPERATION MAY REQUIRE USE OF
CERTIFIED SAFETY EQUIPMENT
Work in mines, tunnels, deep pits or on loose or
wet surfaces could produce danger of falling
rock, roll over or hazardous flying objects.
Additional protection for operator’s cab could be
required in form of a FOPS/Falling Object
Protective Structure and/or ROPS/Roll Over
Protective Structure reinforcement system.
IMPORTANT
When hydraulic system maintenance or service work must be performed, be aware that
accumulators in system store fluid under pressure after system has been shutdown. To release
hydraulic pressure in accumulators, operate control with engine "OFF" until accumulator
pressure is completely dissipated.
HAOA110L
Figure 11
17. S0103000
Page 13
Wheel Loader Safety
Return to Master Table of Contents
Any reinforcement system that is installed on
machine must pass safety and certification
standards and carry appropriate labeling and
rating information. For example, most often
added type of reinforcement system, FOPS,
must meet or exceed Society of Automotive
Engineers standard SAE J1356, "Performance
Criteria for Falling Object Guards for Wheel
loaders."
Never attempt to alter or modify any type of
protective structure reinforcement system, by
drilling holes, welding or remounting or
relocating fasteners. Any serious impact or
damage to system requires a complete integrity
reevaluation. Reinstallation, recertification and/
or replacement of system may be necessary.
INSTALL ADDITIONAL SAFETY EQUIPMENT IF CONDITIONS REQUIRE
When working with a breaker or in some shear work applications, a front guard over windshield may be
required. Windshield guard may or may not be OPS/certified, depending upon the specific application and
working situation.
Laminate glass protection for the front, side or rear windows may also be recommended depending upon
particular site conditions.
Contact your Daewoo distributor for available safety guards and/or recommendations if there is any danger
of getting hit by objects that could strike the operator’s cab. Make sure that all other work site crew
members are kept well away from wheel loader and safe from potential hazards.
MOVEMENT ALARMS
If wheel loader is equipped with an audible travel movement alarm, test alarm on a daily basis. Audible
alarm should sound as soon as travel system is engaged.
SEAT BELTS SHOULD BE USED AT ALL
TIMES
Whenever engine is running, operator should be
seated at the control station with seat belt
properly engaged.
HAOA100L
Figure 12
Figure 13
18. S0103000
Page 14
Wheel Loader Safety
Return to Master Table of Contents
WINDOW GLASS BREAKING TOOL
This loader is equipped with a glass breaking
tool. It is located in the lower left side of the cab
just rear of the door. This tool can be used in
case of an emergency situation which requires
the breaking of glass to exit from the operator’s
cabin. Grip the handle firmly and use the sharp
point to break the glass.
KEEP A FIRE EXTINGUISHER AT HAND
It is recommended that an appropriately sized
(2.27 kg [5 lb] or larger) multi-purpose "A/B/C"
fire extinguisher be mounted in cab. Check and
service fire extinguisher at regular intervals and
make sure that all work site crew members are
adequately trained in its use.
MAINTAIN STANDARD SAFETY EQUIPMENT IN GOOD CONDITION
Machinery guards and body panel covers must be in place at all times. Keep well clear of rotating parts.
Pinch point hazards such as cooling fan and alternator drive belts could catch hair, jewelry or oversize or
very loose clothing.
Safety labels must be replaced if they are damaged or become unreadable. Information on labels gives
work crew members an important safety reminder. Part numbers for each decal and required mounting
locations are shown on pages 1-2 through 1-4 of this section.
SAFETY-CRITICAL PARTS MUST BE REPLACED PERIODICALLY
Replace following fire-related components as soon as they begin to show any sign of wear, or at regular
periodic intervals, whether or not deterioration is visible:
• Fuel system flexible hoses, the tank overflow drain hose and the fuel filler cap.
• Hydraulic system hoses, especially the pump outlet lines and front and rear pump branch
hoses.
• Keep mounting brackets and hose and cable routing straps tight. Hose routing should have
gradual bends.
HYDRAULIC CYLINDER SEALS REQUIRE PERIODIC REPLACEMENT
Check cylinder drift rate at regular intervals. Overhaul seal kits are available through Daewoo.
Figure 14
HAOA080L
Figure 15