The document provides safety information and guidelines for operating a Doosan track excavator. It contains 12 sections covering general safety essentials, locations of safety labels, lifting precautions, unauthorized modifications, hazard information, pre-start checks, machine operation, maintenance, batteries, towing, transportation, and lifting with a sling. Operators are instructed to read the safety manual thoroughly and follow all precautions to prevent serious injury or death from unsafe practices.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fujdjjksekmem
This document provides safety information for operating a Doosan track excavator. It lists applicable models and emphasizes the operator's responsibility for safety. The introduction describes the organization of safety sections covering general essentials, safety labels, lifting precautions, unauthorized modifications, hazards, pre-start checks, operation, maintenance, batteries, towing, shipping and lifting with slings. Signal words like Danger, Warning and Caution indicate the degree of hazard. Safety should always be the top priority when working on or near excavation equipment.
Daewoo doosan dx140 lc excavator service repair manual (serial number 5001 an...ufjjsjkkekmmd
The document provides safety information and operating instructions for a DOOSAN excavator. It discusses general safety essentials, locations of safety labels, unauthorized modifications, hazards, and procedures for operation, maintenance, batteries, towing, shipping, and lifting. Safety is the top priority, and operators should fully understand all safety instructions before operating the excavator.
Daewoo doosan dx180 lc excavator service repair manual (serial number 5001 an...ufjjsjkkekmmd
This document provides safety information for operating a Doosan track excavator. It outlines general safety essentials and precautions, locations of safety labels, unauthorized modifications, hazards, and procedures for starting the engine, operation, maintenance, batteries, towing, shipping, and lifting with a sling. Operators and maintenance personnel should read this manual thoroughly before working on the machine to understand safety procedures and avoid hazardous situations that could result in injury or death.
Daewoo doosan dx480 lc excavator service repair manual (serial number 5001 an...fujjdfjjskekmm
The swing bearing allows the upper structure of the excavator to rotate 360 degrees relative to the lower chassis. Proper lubrication and maintenance of the swing bearing is essential to prevent wear and ensure smooth operation of the excavator. Technicians should follow the lubrication schedule and inspection procedures outlined in the manual to keep the swing bearing functioning properly.
Daewoo doosan dx350 lc excavator service repair manual (serial number 5980 an...ufjjjskkemmd
1) To remove the cabin, disconnect electrical connections, hydraulic lines, and mounting bolts and nuts. Lift the cabin shell off using the four lift points on the top of the cabin.
2) To install the cabin, lift it into position using the four lift points and reconnect all electrical connections and hydraulic lines. Install the mounting bolts and nuts and tighten to the specified torques.
3) Safety precautions include lowering the attachment to the ground, relieving hydraulic pressure, shutting off the engine, and disconnecting the battery before removal or installation. Proper lifting equipment is required to safely handle the cabin shell.
Daewoo doosan dx340 lca excavator service repair manual (serial number 5001 a...ufjjjskkemmd
The document provides instructions for disassembling and assembling a swing reduction gearbox for an excavator. It describes removing the gearbox from the excavator as an assembly with the swing motor. It then provides step-by-step instructions to disassemble the gearbox by removing components like gears, shafts, and seals. Reassembly instructions are also included, such as pressing bearings into shafts and installing springs. Safety precautions are provided to properly support and lift components using slings or eye bolts.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fjjskekfsemmd
The document provides information on removing the swing reduction gear from an excavator. The key steps are:
1. Drain oil from the reduction gearbox and disconnect hydraulic and lubrication lines.
2. Remove 11 bolts holding the swing reduction gearbox and motor assembly to the frame and lift it off.
3. Disassemble the reduction gearbox by removing the sun gears, carriers, ring gear, and drive shaft. Care must be taken not to damage any parts during disassembly.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fjjskekkdkoepll
The document provides information on removing the swing reduction gear from an excavator. The key steps are:
1. Drain oil from the reduction gearbox and disconnect hydraulic and lubrication lines.
2. Remove 11 bolts holding the swing reduction gearbox and motor assembly to the frame and lift it off.
3. Disassemble the reduction gearbox by removing the sun gears, carriers, ring gear, and drive shaft. Care must be taken not to damage any parts during disassembly.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fujdjjksekmem
This document provides safety information for operating a Doosan track excavator. It lists applicable models and emphasizes the operator's responsibility for safety. The introduction describes the organization of safety sections covering general essentials, safety labels, lifting precautions, unauthorized modifications, hazards, pre-start checks, operation, maintenance, batteries, towing, shipping and lifting with slings. Signal words like Danger, Warning and Caution indicate the degree of hazard. Safety should always be the top priority when working on or near excavation equipment.
Daewoo doosan dx140 lc excavator service repair manual (serial number 5001 an...ufjjsjkkekmmd
The document provides safety information and operating instructions for a DOOSAN excavator. It discusses general safety essentials, locations of safety labels, unauthorized modifications, hazards, and procedures for operation, maintenance, batteries, towing, shipping, and lifting. Safety is the top priority, and operators should fully understand all safety instructions before operating the excavator.
Daewoo doosan dx180 lc excavator service repair manual (serial number 5001 an...ufjjsjkkekmmd
This document provides safety information for operating a Doosan track excavator. It outlines general safety essentials and precautions, locations of safety labels, unauthorized modifications, hazards, and procedures for starting the engine, operation, maintenance, batteries, towing, shipping, and lifting with a sling. Operators and maintenance personnel should read this manual thoroughly before working on the machine to understand safety procedures and avoid hazardous situations that could result in injury or death.
Daewoo doosan dx480 lc excavator service repair manual (serial number 5001 an...fujjdfjjskekmm
The swing bearing allows the upper structure of the excavator to rotate 360 degrees relative to the lower chassis. Proper lubrication and maintenance of the swing bearing is essential to prevent wear and ensure smooth operation of the excavator. Technicians should follow the lubrication schedule and inspection procedures outlined in the manual to keep the swing bearing functioning properly.
Daewoo doosan dx350 lc excavator service repair manual (serial number 5980 an...ufjjjskkemmd
1) To remove the cabin, disconnect electrical connections, hydraulic lines, and mounting bolts and nuts. Lift the cabin shell off using the four lift points on the top of the cabin.
2) To install the cabin, lift it into position using the four lift points and reconnect all electrical connections and hydraulic lines. Install the mounting bolts and nuts and tighten to the specified torques.
3) Safety precautions include lowering the attachment to the ground, relieving hydraulic pressure, shutting off the engine, and disconnecting the battery before removal or installation. Proper lifting equipment is required to safely handle the cabin shell.
Daewoo doosan dx340 lca excavator service repair manual (serial number 5001 a...ufjjjskkemmd
The document provides instructions for disassembling and assembling a swing reduction gearbox for an excavator. It describes removing the gearbox from the excavator as an assembly with the swing motor. It then provides step-by-step instructions to disassemble the gearbox by removing components like gears, shafts, and seals. Reassembly instructions are also included, such as pressing bearings into shafts and installing springs. Safety precautions are provided to properly support and lift components using slings or eye bolts.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fjjskekfsemmd
The document provides information on removing the swing reduction gear from an excavator. The key steps are:
1. Drain oil from the reduction gearbox and disconnect hydraulic and lubrication lines.
2. Remove 11 bolts holding the swing reduction gearbox and motor assembly to the frame and lift it off.
3. Disassemble the reduction gearbox by removing the sun gears, carriers, ring gear, and drive shaft. Care must be taken not to damage any parts during disassembly.
Daewoo doosan dx225 nlc excavator service repair manual (serial number 5001 a...fjjskekkdkoepll
The document provides information on removing the swing reduction gear from an excavator. The key steps are:
1. Drain oil from the reduction gearbox and disconnect hydraulic and lubrication lines.
2. Remove 11 bolts holding the swing reduction gearbox and motor assembly to the frame and lift it off.
3. Disassemble the reduction gearbox by removing the sun gears, carriers, ring gear, and drive shaft. Care must be taken not to damage any parts during disassembly.
Toyota 30 5 fbc15 battery forklift service repair manualfjskekdmmmse
This document provides an overview of servicing procedures for Toyota battery forklifts models 5FBC13-30. It begins with exterior views of the vehicles and lists the various models. The document then explains how to use the service manual, including terminology, abbreviations, and testing procedures. It provides tables of standard torque specifications and lists recommended lubricants and maintenance schedules. The document is intended to help technicians quickly and correctly service the corresponding forklift models.
Toyota 30 5 fbc13 battery forklift service repair manualfjskekdmmmse
This document provides an overview of servicing procedures for Toyota battery forklifts models 5FBC13-30. It begins with exterior views of the vehicles and lists the various models. The document then explains how to use the service manual, including terminology, abbreviations, and testing procedures. It provides tables of standard torque specifications and lists recommended lubricants and maintenance schedules. The document is intended to help technicians quickly and correctly service the corresponding forklift models.
Toyota 6 bws20 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains sections on safety, machine information, maintenance procedures, lubrication charts, and service instructions for frame components. Key maintenance tasks include inspecting covers and rollers, replacing controls, and lubricating points based on hours of operation. Safety warnings caution to secure guards before operation and provide battery, static, and welding safety guidelines.
Toyota 6 bws13 electric walkie adjustable straddle stacker service repair man...fjskekdmmmse
This document provides instructions and guidelines for maintaining an electric walkie adjustable straddle stacker truck. It contains information on:
1. Cleaning the external and internal components of the truck on a regular basis to ensure reliability.
2. Following a maintenance schedule that includes inspection and lubrication of parts at regular intervals based on operating hours.
3. Procedures for servicing key components like the drive motor, gear unit, brakes, steering and electrical systems.
4. Safety regulations that must be followed when performing maintenance to prevent injury and electrical/mechanical damage.
Toyota 6 bws11 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides information on maintenance procedures for electric walkie trucks. It contains sections on safety warnings, planned maintenance schedules, lubrication charts, and instructions for servicing different components of the trucks including the frame, inspection covers, battery rollers, driver controls, and more. Key maintenance tasks include checking for loose or damaged parts, inspecting hydraulic and electrical systems, and applying grease according to lubrication schedules. Safety is emphasized throughout, with warnings to secure guards and avoid contact with electricity or moving parts.
Toyota 6 bws10 electric walkie adjustable straddle stacker service repair man...fjskekdmmmse
This document provides guidance on operating and maintaining an electric walkie stacker. It warns that all safety guards must be in place before operating the equipment. The document consists mainly of detailed instructions for routine maintenance, repairs, and inspections of the various mechanical and electrical systems on the stacker, including the support arm, drive motor, brakes, steering, electrical systems, hydraulics, and lift chains. Proper maintenance is important for safety and performance.
Toyota 6 bwr15 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safely operating and servicing the equipment.
- Technical specifications and dimensions for different truck models.
- Instructions for planned maintenance tasks like lubrication and inspections to perform daily, monthly, or annually.
- Exploded diagrams and procedures for servicing major components like the chassis, controls, battery, and mast.
The manual is intended to guide safe and proper maintenance of the trucks to maximize their lifespan.
Toyota 6 bwc20 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safety procedures that must be followed when operating or servicing the equipment.
- Technical specifications and dimensions for various truck models.
- Identification of main components and fastener types used.
- Scheduled maintenance procedures to be performed at regular intervals.
- Lubrication points and approved lubricants for different parts.
- Removal and installation instructions for components like controls, covers and batteries.
Toyota 6 bwc15 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains sections on safety, machine information, maintenance procedures, lubrication charts, and service instructions for frame components. Key maintenance tasks include inspecting covers and rollers, replacing controls, and lubricating points based on hours of operation. Safety warnings caution to secure guards before operation and provide information on batteries, welding and more.
Toyota 6 bwc10 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safety procedures that must be followed when operating or servicing the equipment.
- Technical specifications and dimensions for different truck models.
- Identification of major components and their functions.
- Schedules and procedures for planned maintenance, including lubrication points and specifications.
- Instructions for servicing different parts of the trucks, such as controls, batteries, and chassis components.
Toyota 5 fgc15 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists the engine repair manuals that should be used in conjunction. The bulk of the document consists of sections covering maintenance procedures, component specifications, and inspection periods for various systems of the forklift, including the engine, transmission, axles, steering, brakes, mast, hydraulics and electrical systems. Instructions are provided for lubrication schedules, tightening torques, and replacing worn parts at regular intervals to keep the forklifts functioning properly.
Toyota 5 fgc13 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists related engine repair manuals that should be used alongside it. The bulk of the document consists of reference tables and charts for specifications like standard bolt tightening torques, recommended lubricants, and a periodic maintenance schedule. It provides technicians with the information needed to correctly service Toyota forklifts.
Toyota 5 fgc10 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists the engine repair manuals that should be used as a reference. The bulk of the document consists of sections covering maintenance procedures, component specifications, and inspection periods for various systems of the forklift, such as the engine, transmission, brakes, hydraulics, and electrical components. Instructions are provided for lubrication schedules, tightening torques, and periodic maintenance best practices to ensure proper operation and servicing of Toyota forklifts.
Massey ferguson mf 435 tractor (br for australia) parts catalogue manualfjskekdmmmse
This document provides parts listings and technical specifications for components of a Massey Ferguson MF 435 tractor for Australia. It includes 12 pages detailing over 275 individual parts across various systems of the tractor, including the engine, axles, drive train, hydraulics, electrical, and others. Each part is listed with its number, quantity used, description, and any relevant technical specifications or comments.
Massey ferguson mf 415 tractor parts catalogue manualfjskekdmmmse
The document provides a table of contents and specifications for engine installation on a Massey Ferguson 415 tractor. It lists over 60 pages detailing parts, part numbers, and descriptions for the engine, fuel system, exhaust, alternator, and other components. Individual parts listed include the cylinder block, liner, plugs, seals, covers, washers, bolts, and other items needed for engine installation.
This document provides a list of parts for a Massey Ferguson 374/3220 tractor engine. It includes 54 items numbered 1 through 54 with corresponding part numbers, quantities, descriptions, and comments. The parts are grouped into components like the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Quantity codes are provided for items that vary based on the number of tractors sold.
Massey ferguson mf 367 cf crawler parts catalogue manualfjskekdmmmse
This document contains parts lists and technical specifications for engine components of a Massey Ferguson MF 367 CF Crawler tractor. It includes detailed lists of parts for the engine assembly, cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each item lists the part number, quantity, description, and any relevant comments. The level of technical detail provided is aimed at mechanics and part replacements or repairs.
Massey ferguson mf 366 cf crawler parts catalogue manualfjskekdmmmse
This document provides a parts list for a Massey Ferguson MF 366 CF Crawler engine. It includes 3 tables listing parts for the engine assembly, short engine, and cylinder block. Each table includes the part numbers, quantities, descriptions, and comments for approximately 50 individual engine part items.
Massey ferguson mf 364 v footstep tractor parts catalogue manualfjskekdmmmse
The document contains parts lists and technical specifications for components of a Massey Ferguson MF 364 V Footstep tractor engine. It lists over 50 individual parts that make up the engine's cylinder block, crankshaft, pistons, connecting rods, and cylinder head. For each part, it provides the part number, quantity used, description, and additional comments on specifications or application.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Toyota 30 5 fbc15 battery forklift service repair manualfjskekdmmmse
This document provides an overview of servicing procedures for Toyota battery forklifts models 5FBC13-30. It begins with exterior views of the vehicles and lists the various models. The document then explains how to use the service manual, including terminology, abbreviations, and testing procedures. It provides tables of standard torque specifications and lists recommended lubricants and maintenance schedules. The document is intended to help technicians quickly and correctly service the corresponding forklift models.
Toyota 30 5 fbc13 battery forklift service repair manualfjskekdmmmse
This document provides an overview of servicing procedures for Toyota battery forklifts models 5FBC13-30. It begins with exterior views of the vehicles and lists the various models. The document then explains how to use the service manual, including terminology, abbreviations, and testing procedures. It provides tables of standard torque specifications and lists recommended lubricants and maintenance schedules. The document is intended to help technicians quickly and correctly service the corresponding forklift models.
Toyota 6 bws20 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains sections on safety, machine information, maintenance procedures, lubrication charts, and service instructions for frame components. Key maintenance tasks include inspecting covers and rollers, replacing controls, and lubricating points based on hours of operation. Safety warnings caution to secure guards before operation and provide battery, static, and welding safety guidelines.
Toyota 6 bws13 electric walkie adjustable straddle stacker service repair man...fjskekdmmmse
This document provides instructions and guidelines for maintaining an electric walkie adjustable straddle stacker truck. It contains information on:
1. Cleaning the external and internal components of the truck on a regular basis to ensure reliability.
2. Following a maintenance schedule that includes inspection and lubrication of parts at regular intervals based on operating hours.
3. Procedures for servicing key components like the drive motor, gear unit, brakes, steering and electrical systems.
4. Safety regulations that must be followed when performing maintenance to prevent injury and electrical/mechanical damage.
Toyota 6 bws11 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides information on maintenance procedures for electric walkie trucks. It contains sections on safety warnings, planned maintenance schedules, lubrication charts, and instructions for servicing different components of the trucks including the frame, inspection covers, battery rollers, driver controls, and more. Key maintenance tasks include checking for loose or damaged parts, inspecting hydraulic and electrical systems, and applying grease according to lubrication schedules. Safety is emphasized throughout, with warnings to secure guards and avoid contact with electricity or moving parts.
Toyota 6 bws10 electric walkie adjustable straddle stacker service repair man...fjskekdmmmse
This document provides guidance on operating and maintaining an electric walkie stacker. It warns that all safety guards must be in place before operating the equipment. The document consists mainly of detailed instructions for routine maintenance, repairs, and inspections of the various mechanical and electrical systems on the stacker, including the support arm, drive motor, brakes, steering, electrical systems, hydraulics, and lift chains. Proper maintenance is important for safety and performance.
Toyota 6 bwr15 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safely operating and servicing the equipment.
- Technical specifications and dimensions for different truck models.
- Instructions for planned maintenance tasks like lubrication and inspections to perform daily, monthly, or annually.
- Exploded diagrams and procedures for servicing major components like the chassis, controls, battery, and mast.
The manual is intended to guide safe and proper maintenance of the trucks to maximize their lifespan.
Toyota 6 bwc20 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safety procedures that must be followed when operating or servicing the equipment.
- Technical specifications and dimensions for various truck models.
- Identification of main components and fastener types used.
- Scheduled maintenance procedures to be performed at regular intervals.
- Lubrication points and approved lubricants for different parts.
- Removal and installation instructions for components like controls, covers and batteries.
Toyota 6 bwc15 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains sections on safety, machine information, maintenance procedures, lubrication charts, and service instructions for frame components. Key maintenance tasks include inspecting covers and rollers, replacing controls, and lubricating points based on hours of operation. Safety warnings caution to secure guards before operation and provide information on batteries, welding and more.
Toyota 6 bwc10 electric walkie high lifter truck service repair manualfjskekdmmmse
This document provides maintenance and service information for electric walkie trucks. It contains:
- Warnings about safety procedures that must be followed when operating or servicing the equipment.
- Technical specifications and dimensions for different truck models.
- Identification of major components and their functions.
- Schedules and procedures for planned maintenance, including lubrication points and specifications.
- Instructions for servicing different parts of the trucks, such as controls, batteries, and chassis components.
Toyota 5 fgc15 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists the engine repair manuals that should be used in conjunction. The bulk of the document consists of sections covering maintenance procedures, component specifications, and inspection periods for various systems of the forklift, including the engine, transmission, axles, steering, brakes, mast, hydraulics and electrical systems. Instructions are provided for lubrication schedules, tightening torques, and replacing worn parts at regular intervals to keep the forklifts functioning properly.
Toyota 5 fgc13 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists related engine repair manuals that should be used alongside it. The bulk of the document consists of reference tables and charts for specifications like standard bolt tightening torques, recommended lubricants, and a periodic maintenance schedule. It provides technicians with the information needed to correctly service Toyota forklifts.
Toyota 5 fgc10 forklift service repair manualfjskekdmmmse
This document provides service information for Toyota forklifts. It begins with an introduction to the manual and lists the engine repair manuals that should be used as a reference. The bulk of the document consists of sections covering maintenance procedures, component specifications, and inspection periods for various systems of the forklift, such as the engine, transmission, brakes, hydraulics, and electrical components. Instructions are provided for lubrication schedules, tightening torques, and periodic maintenance best practices to ensure proper operation and servicing of Toyota forklifts.
Massey ferguson mf 435 tractor (br for australia) parts catalogue manualfjskekdmmmse
This document provides parts listings and technical specifications for components of a Massey Ferguson MF 435 tractor for Australia. It includes 12 pages detailing over 275 individual parts across various systems of the tractor, including the engine, axles, drive train, hydraulics, electrical, and others. Each part is listed with its number, quantity used, description, and any relevant technical specifications or comments.
Massey ferguson mf 415 tractor parts catalogue manualfjskekdmmmse
The document provides a table of contents and specifications for engine installation on a Massey Ferguson 415 tractor. It lists over 60 pages detailing parts, part numbers, and descriptions for the engine, fuel system, exhaust, alternator, and other components. Individual parts listed include the cylinder block, liner, plugs, seals, covers, washers, bolts, and other items needed for engine installation.
This document provides a list of parts for a Massey Ferguson 374/3220 tractor engine. It includes 54 items numbered 1 through 54 with corresponding part numbers, quantities, descriptions, and comments. The parts are grouped into components like the cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Quantity codes are provided for items that vary based on the number of tractors sold.
Massey ferguson mf 367 cf crawler parts catalogue manualfjskekdmmmse
This document contains parts lists and technical specifications for engine components of a Massey Ferguson MF 367 CF Crawler tractor. It includes detailed lists of parts for the engine assembly, cylinder block, crankshaft, pistons, connecting rods, cylinder head, and rocker shaft. Each item lists the part number, quantity, description, and any relevant comments. The level of technical detail provided is aimed at mechanics and part replacements or repairs.
Massey ferguson mf 366 cf crawler parts catalogue manualfjskekdmmmse
This document provides a parts list for a Massey Ferguson MF 366 CF Crawler engine. It includes 3 tables listing parts for the engine assembly, short engine, and cylinder block. Each table includes the part numbers, quantities, descriptions, and comments for approximately 50 individual engine part items.
Massey ferguson mf 364 v footstep tractor parts catalogue manualfjskekdmmmse
The document contains parts lists and technical specifications for components of a Massey Ferguson MF 364 V Footstep tractor engine. It lists over 50 individual parts that make up the engine's cylinder block, crankshaft, pistons, connecting rods, and cylinder head. For each part, it provides the part number, quantity used, description, and additional comments on specifications or application.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Daewoo doosan dx225 lc excavator service repair manual (serial number 5001 and up)
1. K1015439E Shop Manual
Copyright 2006 DOOSAN
DOOSAN reserves the right to improve its products continuously, delivering the best possible product to
the marketplace. These improvements can be implemented at any time with no obligation to change
materials previously sold. It is recommended that consumers periodically contact their distributors for most
recent documentation on purchased equipment.
This documentation may include attachments and optional equipment not available in your machine's
package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Shop Manual
K1015439E
Serial Number 5001 and Up
DX225LC
2. Table of Contents
Page 1
1Table of Contents
Publication Request for Proposed Revision
Safety
Track Excavator Safety......................................................................... SP000014
Specifications
Specification for DX225LC.................................................................... SP000908
General Maintenance
General Maintenance Procedures........................................................ SP000016
Standard Torques................................................................................. SP000017
Upper Structure
Cabin .................................................................................................... SP000943
Counterweight....................................................................................... SP000940
Fuel Tank.............................................................................................. SP001005
Fuel Transfer Pump.............................................................................. SP000021
Swing Bearing....................................................................................... SP000022
Swing Reduction Gear.......................................................................... SP000915
Lower Structure and Chassis
Track Assembly .................................................................................... SP000911
Engine and Drivetrain
Air Conditioner...................................................................................... SP000025
Drive Coupling (Main Pump)................................................................. SP000912
Hydraulics
Hydraulic System Troubleshooting, Testing and Adjustment ............... SP000913
3. Table of Contents
Page 2
Accumulator.......................................................................................... SP000028
Center Joint (Swivel)............................................................................. SP000029
Cylinders............................................................................................... SP000914
Swing Motor.......................................................................................... SP000194
Travel Motor.......................................................................................... SP000922
Gear Pump ........................................................................................... SP000931
Main Control Valve ............................................................................... SP001024
Axle Piston Pump ................................................................................. SP000932
PTO Server........................................................................................... SP000933
Remote Control Valve (Work Lever / Joystick)..................................... SP000069
Travel Control Valve (with Damper)...................................................... SP000070
Solenoid Valve Assembly ..................................................................... SP000445
Breaker EPPR Valve (Opt) ................................................................... SP000192
Hydraulic Schematic (DX225LC).......................................................... SP000934
Electrical System
Electrical System .................................................................................. SP000935
Electrical Schematic (DX180LC/DX225LC/DX225NLC/DX255LC)...... SP000936
Attachments
Boom and Arm...................................................................................... SP000937
Bucket................................................................................................... SP000939
5. Track Excavator Safety
Page 5
SP000014
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION!
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling the load.
Remember, that ultimately safety is your own responsibility.
MODEL SERIAL NUMBER RANGE
DX180LC 5001 and Up
DX225LC 5001 and Up
DX225NLC 5001 and Up
DX255LC 5001 and Up
DX300LC 5001 and Up
DX340LC 5001 and Up
DX420LC 5001 and Up
DX480LC 5001 and Up
DX520LC 5001 and Up
6. SP000014Track Excavator Safety
Page 6
TO THE OPERATOR OF A
DOOSAN EXCAVATOR
Please respect the importance of taking responsibility for your
own safety, and that of other people who may be affected by
your actions.
The safety information on the following pages is organized into
the following sections:
1. “General Safety Essentials” on page 1-10
2. “Location of Safety Labels” on page 1-11
3. “Summary of Safety Precautions for Lifting in Digging
Mode” on page 1-12
4. “Unauthorized Modifications” on page 1-13
5. “General Hazard Information” on page 1-13
6. “Before Starting Engine” on page 1-22
7. “Machine Operation” on page 1-26
8. “Maintenance” on page 1-33
9. “Battery” on page 1-42
10. “Towing” on page 1-44
11. “Shipping and Transportation” on page 1-45
12. “Lifting With Sling” on page 1-45
DANGER!
Unsafe use of the excavator could lead to serious injury or
death. Operating procedures, maintenance and equipment
practices or traveling or shipping methods that do not
follow the safety guidelines on the following pages could
cause serious, potentially fatal injuries or extensive damage
to the machine or nearby property.
7. Track Excavator Safety
Page 7
SP000014
WARNING!
Improper operation and maintenance of this machine can
be hazardous and could result in serious injury or death.
Operator and maintenance personnel should read this
manual thoroughly before beginning operation or
maintenance.
Keep this manual in the storage compartment to the rear of
the operator's seat, and have all personnel involved in
working on the machine read the manual periodically.
Some actions involved in operation and maintenance of the
machine can cause a serious accident, if they are not done
in a manner described in this manual.
The procedures and precautions given in this manual apply
only to intended uses of the machine.
If you use your machine for any unintended uses that are
not specifically prohibited, you must be sure that it is safe
for others. In no event should you or others engage in
prohibited uses or actions as described in this manual.
DOOSAN delivers machines that comply with all applicable
regulations and standards of the country to which it has
been sent. If this machine has been purchased in another
country or purchased from someone in another country, it
may lack certain safety devices and specifications that are
necessary for use in your country. If there is any question
about whether your product complies with the applicable
standards and regulations of your country, consult
DOOSAN or your DOOSAN distributor before operating the
machine.
8. SP000014Track Excavator Safety
Page 8
Learn Signal Words Used With Safety Alert
Symbol
The words "CAUTION," "WARNING," and "DANGER" used
throughout this manual and on decals on the machine indicate
degree of risk of hazards or unsafe practices. All three degrees
of risk indicate that safety is involved. Observe precautions
indicated whenever you see the Safety Alert "Triangle," no
matter which signal word appears next to the "Exclamation
Point" symbol.
SAFETY ALERT SYMBOL
Be Prepared - Get to Know All Operating and Safety
Instructions
This is the Safety Alert Symbol. Wherever it appears in this
manual or on safety signs on the machine you must be alert
to the potential for personal injury or accidents. Always
observe safety precautions and follow recommended
procedures.
CAUTION!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in minor or moderate injury. It may
also be used to alert against a generally unsafe practice.
WARNING!
This word is used on safety messages and safety labels and
indicates potential threat of a hazardous situation that, if
not avoided, could result in serious injury or death. It may
also be used to alert against highly unsafe practice.
DANGER!
This word is used on safety messages and safety labels and
indicates an imminent hazard of a situation that, if not
avoided, is very likely to cause death or extremely serious
injury. It may also be used to alert against equipment that
may detonate or explode if handled or treated carelessly.
9. Track Excavator Safety
Page 9
SP000014
Safety precautions are described in SAFETY from page -11 on.
DOOSAN cannot predict every circumstance that might involve a
potential hazard in operation and maintenance. Therefore the
safety messages in this manual and on the machine may not
include all possible safety precautions. If any procedures or
actions not specifically recommended or allowed in this manual
are used, you must be sure that you and others can do such
procedures and actions safely and without damaging the
machine. If you are unsure about the safety of any procedures,
contact a DOOSAN distributor.
10. SP000014Track Excavator Safety
Page 10
GENERAL SAFETY ESSENTIALS
Accessory Applications
The excavator has been primarily designed for moving earth
with a bucket. For use as a grapple or for other object handling,
contact DOOSAN for proper installation and application.
Lifting-work applications (unless restricted or prohibited by local
regulations) are permitted in approved lift configuration, to rated
capacity only, with no side-loading. DO NOT use the machine for
activities for which it was not intended. DO NOT use the bucket
for lifting work, unless lift slings are used in the approved
configuration.
Use of an accessory hydraulic hammer (breaker), work in rough
terrain, demolition applications or other hazardous operation
may require installation of additional protective structures to
safeguard the operator.
Lifting Capacity Rating Configuration
Lifting capacity ratings that are printed at the end of this safety
section are based on the machine being level, on a firm
supporting surface, with hooks and slings attached in approved
configuration. Loads must be balanced and supported evenly.
Use tag lines to keep the load steady if wind conditions and
large surface area are a problem. Work crew hand signals,
individual tasks and safe procedures should all be universally
understood before the lift is made.
IMPORTANT
Before using the excavator to make lifts check municipal
and regional regulations or statutes that could apply.
Governing ordinances may require that all heavy lifting be
done with single purpose equipment specifically designed
for making lifts, or other local restrictions may apply.
Making heavy lifts with a general purpose excavator that
can be used for digging, loading, grading or other work may
be expressly forbidden by a regional injunction or other
legal prohibition. Always follow all the other instructions,
guidelines and restrictions for Safe Lifting in the Operation
and Maintenance Manuals.
12. SP000915
Page 5
Swing Reduction Gear
SAFETY PRECAUTIONS
APPLICABLE MODELS
The contents of this section apply to the following models and
serial number ranges.
CAUTION!
Follow all safety recommendations and safe shop practices
outlined in the front of this manual or those contained
within this section.
Always use tools and equipment that are in good working
order.
Use lifting and hoisting equipment capable of safely
handling the load.
Remember, that ultimately safety is your own responsibility.
MODEL SERIAL NUMBER RANGE
DX180LC 5001 and Up
DX225LC 5001 and Up
DX225NLC 5001 and Up
13. SP000915
Page 7
Swing Reduction Gear
GENERAL DESCRIPTION
Theory of Operation
The swing motor final drive is a two-stage planetary gearbox
with two planet gears, two sun gears and two-stage output
reduction. The planetary gear engages the ring gear. The pinion
gear is connected to the output shaft and spline.
The final drive reduces swing motor rpm to increase swing motor
output torque. The available maximum swing speed provides a
fast turning rate for efficient, rapid work cycling with more than
adequate power for good acceleration.
15. SP000915
Page 9
Swing Reduction Gear
Specifications
Reference
Number
Description
1 Casing
2 Driveshaft
3 Plate
4 Spherical Roller Bearing
5 Cover Plate
6 Retaining Ring
7 Oil Seal
8 Spherical Roller Bearing
9 Ring Gear
10 No. 2 Carrier
11 No. 2 Thrust Washer
12 No. 2 Planet Gear
13 No. 2 Bushing
14 No. 2 Pin
15 Spring Pin
16 Hex Head Bolt
17 No. 3 Thrust Washer
18 No. 2 Sun Gear
19 Lock Pin
20 No. 1 Carrier
21 No. 1 Thrust Washer
22 No. 1 Planet Gear
23 No. 1 Pin Assembly
24 Socket Head Bolt
25 No. 1 Sun Gear
26 Retaining Ring
27 Plug
28 Plug
29 Level Gauge Pipe
30 Level Gauge
31 Double Tap Washer
32 Pipe
33 Hex Head Bolt
Reference
Number
Description
Swing Reduction Gearbox Specification
Drive Type Two-stage Planetary Gear
Reduction Ratio 19.636
Maximum Output Speed 83.6 rpm
Maximum Output Torque
1,120 kg•m
(8,100 lb ft)
Weight
120 kg
(265 lb)
Pinion Gear Specification
Type Spur Gear
Gear P.C.D
156 mm
(6.14 in)
No. of Teeth 13
Module 12
16. SP000915
Page 11
Swing Reduction Gear
REMOVAL
1. Park on firm and level ground.
2. Lower front attachment (bucket) to ground.
3. Shut down engine.
4. Set safety lever on "RELEASED" position.
5. Turn starter switch to "I" (ON) position.
6. Fully stroke work levers (joysticks) in all directions to
relieve any pressure from accumulators.
7. Set safety lever on "LOCK" position.
8. Turn key to "O" (OFF) position and remove from starter
switch.
9. Hang a maintenance warning tag on controls.
10. Disconnect negative (-) battery cable leading to frame from
battery.
11. Tag and disconnect hoses from swing motor (1, Figure 3).
Plug and cap hoses and ports to prevent contamination
from entering hydraulic system or component.
12. Assemble drain hose (3, Figure 3) to drain valve (8) and
drain oil from reduction gearbox (5, Figure 3).
13. Remove drain hose (3, Figure 3) from drain valve (8) and
disconnect hose (2, Figure 3) from reduction gearbox (5).
14. Disconnect grease lubrication line (7, Figure 3) from
reduction gearbox (5).
15. Remove eleven bolts and washers (4, Figure 3) holding
swing reduction gearbox (5) to frame.
16. Using a suitable lifting device, sling swing motor (1, Figure
3) and remove swing motor and reduction gearbox (5) as
an assembly from unit.
NOTE: There is an alignment pin (6, Figure 3), on
reduction gearbox flange.
O I
FG007720
WARNING
DON'T TOUCH WHEN
PERFORMING INSPECTION
OR MAINTENANCE
Figure 2
WARNING!
If engine must be running while performing
maintenance, always use extreme caution. Always
have one person in cabin at all times. Never leave
cabin with engine running.
FG007055
1
5
3
7
8
2
4
6
Figure 3
17. SP000915Swing Reduction Gear
Page 12
DISASSEMBLY
1. Remove bolts and motor from swing reduction case.
2. Remove No. 1 sun gear from No. 1 carrier.
IMPORTANT
Select a clean place.
Spread a rubber mat or cloth on top of the overhaul
workbench to prevent parts from being damaged.
Figure 4
CAUTION!
The motor should be separated without damage or any
foreign substance.
Figure 5
CAUTION!
Care should be taken not to damage mounting surface
of motor. Carefully remove all gasket material from
mounting surfaces.
Figure 6
CAUTION!
Care should be taken not to damage teeth of No. 1 sun
gear.
18. SP000915
Page 13
Swing Reduction Gear
3. Remove No. 1 carrier.
4. Remove washer and No. 2 sun gear.
Figure 7
Figure 8
Figure 9
CAUTION!
Care should be taken not to damage teeth of No. 2 sun
gear.
19. SP000915Swing Reduction Gear
Page 14
5. Remove bolt in No. 2 carrier.
6. Install eyebolts in No. 2 carrier and remove it from ring
gear.
Figure 10
Figure 11
CAUTION!
Care should be taken not to damage teeth of No. 2
carrier and ring gear.
Figure 12
20. SP000915
Page 15
Swing Reduction Gear
7. Install eyebolts in ring gear and remove it.
Figure 13
Figure 14
Figure 15
CAUTION!
Care should be taken not to damage mounting
surfaces of ring gear and case. Carefully remove all
gasket material from mounting surfaces.
21. SP000915Swing Reduction Gear
Page 16
8. Use a rollover machine to turn assembly over.
9. Remove cover plate.
Figure 16
Figure 17
Figure 18
Figure 19
22. SP000915
Page 17
Swing Reduction Gear
10. Use a rollover machine to turn case over and place a jig on
driveshaft. Use a press to remove driveshaft from case.
11. Remove bearing from case.
Figure 20
CAUTION!
Care should be taken not to have driveshaft drop to
floor when it is pressed out of case.
Figure 21
Figure 22
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. SP000915Swing Reduction Gear
Page 18
12. Put driveshaft in press, and remove bearing and spacer.
CLEANING AND INSPECTION
(WEAR LIMITS AND
TOLERANCES)
For general cleaning and inspection procedures, refer to
"General Maintenance Procedures" section.
Figure 23
Figure 24
25. SP000915
Page 19
Swing Reduction Gear
REASSEMBLY
Shaft and S/R Bearing Heat-fit
1. To cleaning shaft, remove any remnants of anticorrosion
liquid applied on shaft and remove all of foreign
substances using an air gun.
2. Insert spacer on cleaned shaft as shown in figure below
and heat bearing on a special heater.
Figure 25
Figure 26
26. SP000915Swing Reduction Gear
Page 20
3. Stop heating when bearing temperature is between 90° -
100°C (194° - 212°F) and insert it on shaft, holding it with
both hands to keep it level. Insert it slowly first by 4 - 5 mm
(0.16 - 0.29 in) for bearing to seat itself and then push it
hard that it contacts to spacer assembled in shaft
completely.
4. After bearing assembly is completed, leave it air cool for 1 -
2 hours.
Assembly of Carrier Subassemblies
Cleaning Carrier
Put carrier, to whose corners grinding was made to remove all
foreign substances like burr, on steam washer if there remain
any foreign substance and put it on assembly die.
Cleaning Planet Gear
Check if planet gears are washed cleanly and got imprinted and
put it on assembly die.
Figure 27
Figure 28