Pelletterie CRISTIAN s.r.l. is an Italian leather goods company founded in 1970 in Florence, Italy that produces high quality, handmade leather products. The company focuses on Florentine craftsmanship and employs highly skilled artisans to create products that blend classic styles with modern trends. Pelletterie CRISTIAN exports most of its goods worldwide while also serving the Italian domestic market.
A few screen shots of me testing a new 3d engine. The engine is based on Jmonkey. The idea of this engine is to be simple to use and easy to script with hopes of drawing more people into the game development industry.
A few screen shots of me testing a new 3d engine. The engine is based on Jmonkey. The idea of this engine is to be simple to use and easy to script with hopes of drawing more people into the game development industry.
Plastic parts prepared using the Structural Foam process have a cellular or a structural core, surrounded with thick outer layer that combine to give the products greater strength to the weight ratio and as much as twice the rigidity of the solid products that are of the same material and weight.
Two separate experiments were conducted at the sereenhouse of the Unilorin Sugar Research Institute
(USRI) IIorin, to investigate the optimum concentration of a weak acid solution required for the presciption of cut
sugarcane stalks during hybridization. In the first experiment. stalks of two (2) sugarcane varieties (LS 1-047 and LS1057)
which were at the flowering. phase were immersed in three (3) eonecntrations(Blank, O.004M nnd 0.006M
respectively) of sulphurous acid (H2SO]) solution. In the second experiment, stalks of three (3) varieties viz: LSI-047,
LSI-057 and C06806 at the vegetative phase and those of LSI-047, LSI-050, LSI-054, LSI-057, B6609 and'C06806 at
the Dowering phase were also immersed in four (4) concentrations (i.e. Blank, 0.0021\1, 0.004M and O.OO(,M
respectively) of sulphurie acid (H2S04) solution.
Our results showed a rapid decline in the physiologienl activities of the sugarcanc stalks regardlcss of the
concentration and/or the source of the weak acid used as preservative solution. Flowering sequence was also disrupted
in the flowering stalks since none of the varieties could proceed to tile next ,phase, indicating that the stock solutions
were toxic to the test varieties. However, rooting and side shoot emergence (beginning from the riftll and ,cvcnth day
rcspeetively) were observcd ill the sugareanc stalks at both the vegetative and Oowerillg ph,lsl's or diiTercnl
eoneelllralion of the weak 1-1250 •. indicating Ih,1I the: i'nrlJ'ulal ions 'frolll 112SO., were less tOXIC {O ti,l'. l''" 1-::. d"'11 {I")';l'
or the 1-1)50. where the test varie{les nl:ilhl:r r()o(ed nor produce sid\' ,hm)l.
i\ILllllllgh 1110 (2) or the: \'arie:lIl'S (L,SI-O'17 ,md 1..'()ll~()I,) ,'ppe"rl'" III PUSs,'ss greater {,lkral":C: k.\cl I·.' Ii;.: .!,!!"<',.:l'>I, 1:';11' lil<.'>
exoLic judging by their overall performance.
The use of aluminium molds in injection molding is an emerging trend because of its ability to reduce cycle time by as much as 50% when compared to P20 tool steel.
Development of drought tolerant maize cultivars is prerequisite to achieving stable grain yield in
drought–prone ecologies of Nigeria’s Guinea savanna. However, success has been limited mainly due
to lack of maize genotypes that show clear differences in response to well defined moisture deficit
condition. Two sets of drought tolerant (DT) maize germplasm were evaluated under screenhouse and
field conditions between 1999 and 2002. In the screenhouse study, performances of the genotypes
were compared under well-watered condition and moisture deficit imposed at different growth stages.
Under field conditions, the first set comprising 11 accessions along with a check were evaluated for 4
growing seasons while the second set which comprised 3 DT varieties were evaluated along with 2
check varieties using monthly plantings between April and August of 2001 and 2002, respectively. In
the first set, post anthesis moisture deficit significantly reduced grain yield by 25 to 73.5% in the open
pollinated varieties (OPVs) and by 20 to 64% in the hybrids. Grain yield under field conditions ranged
from 2.48 to 3.49, 2.82 to 3.73 and 3.58 to 4.76 tons/ha-1 for 1999, 2000 and 2001 full growing seasons,
respectively, and 2.03 to 2.50 tons/ha-1 for 2000 late growing season. In the second set, pre and post
anthesis moisture deficits reduced grain yield by 77.6 and 95.8%, respectively, of well watered
condition while in the field, grain yields in the genotypes were highest for plantings made in April and
July (1.90 - 2.5 t/ha), lowest for August (0.7 -1.8 t/ha) when moisture deficit coincided with
reproductive phase. Yield stability exhibited under moisture deficit and on the field by 8522-2, Oba
super 2 and AK9943-DMRSR in the first set as well as DT-SR-Y C0 and DT-SR-W C0 in the second set,
indicates their suitability either as cultivars per se or as potential source of DT alleles for
development of DT maize varieties for Nigeria’s savanna ecologies.
China Aluminium Die Casting Moldmakingchinacasting
Shanghai iMolding is a recognized manufacturer of China delivering an extensive assortment of China aluminium die casting parts to numerous global industries.
Michael Gangadeen is an attorney from Ozone Park, New York. He has been practicing the law since graduating with his Juris Doctor from St. John's University School of Law. Before starting his own practice in 2000, Michael provided legal representation to State Farm clients.
Expert Accessory Dwelling Unit (ADU) Drafting ServicesResDraft
Whether you’re looking to create a guest house, a rental unit, or a private retreat, our experienced team will design a space that complements your existing home and maximizes your investment. We provide personalized, comprehensive expert accessory dwelling unit (ADU)drafting solutions tailored to your needs, ensuring a seamless process from concept to completion.
You could be a professional graphic designer and still make mistakes. There is always the possibility of human error. On the other hand if you’re not a designer, the chances of making some common graphic design mistakes are even higher. Because you don’t know what you don’t know. That’s where this blog comes in. To make your job easier and help you create better designs, we have put together a list of common graphic design mistakes that you need to avoid.
Dive into the innovative world of smart garages with our insightful presentation, "Exploring the Future of Smart Garages." This comprehensive guide covers the latest advancements in garage technology, including automated systems, smart security features, energy efficiency solutions, and seamless integration with smart home ecosystems. Learn how these technologies are transforming traditional garages into high-tech, efficient spaces that enhance convenience, safety, and sustainability.
Ideal for homeowners, tech enthusiasts, and industry professionals, this presentation provides valuable insights into the trends, benefits, and future developments in smart garage technology. Stay ahead of the curve with our expert analysis and practical tips on implementing smart garage solutions.
Hello everyone! I am thrilled to present my latest portfolio on LinkedIn, marking the culmination of my architectural journey thus far. Over the span of five years, I've been fortunate to acquire a wealth of knowledge under the guidance of esteemed professors and industry mentors. From rigorous academic pursuits to practical engagements, each experience has contributed to my growth and refinement as an architecture student. This portfolio not only showcases my projects but also underscores my attention to detail and to innovative architecture as a profession.
Book Formatting: Quality Control Checks for DesignersConfidence Ago
This presentation was made to help designers who work in publishing houses or format books for printing ensure quality.
Quality control is vital to every industry. This is why every department in a company need create a method they use in ensuring quality. This, perhaps, will not only improve the quality of products and bring errors to the barest minimum, but take it to a near perfect finish.
It is beyond a moot point that a good book will somewhat be judged by its cover, but the content of the book remains king. No matter how beautiful the cover, if the quality of writing or presentation is off, that will be a reason for readers not to come back to the book or recommend it.
So, this presentation points designers to some important things that may be missed by an editor that they could eventually discover and call the attention of the editor.
7 Alternatives to Bullet Points in PowerPointAlvis Oh
So you tried all the ways to beautify your bullet points on your pitch deck but it just got way uglier. These points are supposed to be memorable and leave a lasting impression on your audience. With these tips, you'll no longer have to spend so much time thinking how you should present your pointers.
Plastic parts prepared using the Structural Foam process have a cellular or a structural core, surrounded with thick outer layer that combine to give the products greater strength to the weight ratio and as much as twice the rigidity of the solid products that are of the same material and weight.
Two separate experiments were conducted at the sereenhouse of the Unilorin Sugar Research Institute
(USRI) IIorin, to investigate the optimum concentration of a weak acid solution required for the presciption of cut
sugarcane stalks during hybridization. In the first experiment. stalks of two (2) sugarcane varieties (LS 1-047 and LS1057)
which were at the flowering. phase were immersed in three (3) eonecntrations(Blank, O.004M nnd 0.006M
respectively) of sulphurous acid (H2SO]) solution. In the second experiment, stalks of three (3) varieties viz: LSI-047,
LSI-057 and C06806 at the vegetative phase and those of LSI-047, LSI-050, LSI-054, LSI-057, B6609 and'C06806 at
the Dowering phase were also immersed in four (4) concentrations (i.e. Blank, 0.0021\1, 0.004M and O.OO(,M
respectively) of sulphurie acid (H2S04) solution.
Our results showed a rapid decline in the physiologienl activities of the sugarcanc stalks regardlcss of the
concentration and/or the source of the weak acid used as preservative solution. Flowering sequence was also disrupted
in the flowering stalks since none of the varieties could proceed to tile next ,phase, indicating that the stock solutions
were toxic to the test varieties. However, rooting and side shoot emergence (beginning from the riftll and ,cvcnth day
rcspeetively) were observcd ill the sugareanc stalks at both the vegetative and Oowerillg ph,lsl's or diiTercnl
eoneelllralion of the weak 1-1250 •. indicating Ih,1I the: i'nrlJ'ulal ions 'frolll 112SO., were less tOXIC {O ti,l'. l''" 1-::. d"'11 {I")';l'
or the 1-1)50. where the test varie{les nl:ilhl:r r()o(ed nor produce sid\' ,hm)l.
i\ILllllllgh 1110 (2) or the: \'arie:lIl'S (L,SI-O'17 ,md 1..'()ll~()I,) ,'ppe"rl'" III PUSs,'ss greater {,lkral":C: k.\cl I·.' Ii;.: .!,!!"<',.:l'>I, 1:';11' lil<.'>
exoLic judging by their overall performance.
The use of aluminium molds in injection molding is an emerging trend because of its ability to reduce cycle time by as much as 50% when compared to P20 tool steel.
Development of drought tolerant maize cultivars is prerequisite to achieving stable grain yield in
drought–prone ecologies of Nigeria’s Guinea savanna. However, success has been limited mainly due
to lack of maize genotypes that show clear differences in response to well defined moisture deficit
condition. Two sets of drought tolerant (DT) maize germplasm were evaluated under screenhouse and
field conditions between 1999 and 2002. In the screenhouse study, performances of the genotypes
were compared under well-watered condition and moisture deficit imposed at different growth stages.
Under field conditions, the first set comprising 11 accessions along with a check were evaluated for 4
growing seasons while the second set which comprised 3 DT varieties were evaluated along with 2
check varieties using monthly plantings between April and August of 2001 and 2002, respectively. In
the first set, post anthesis moisture deficit significantly reduced grain yield by 25 to 73.5% in the open
pollinated varieties (OPVs) and by 20 to 64% in the hybrids. Grain yield under field conditions ranged
from 2.48 to 3.49, 2.82 to 3.73 and 3.58 to 4.76 tons/ha-1 for 1999, 2000 and 2001 full growing seasons,
respectively, and 2.03 to 2.50 tons/ha-1 for 2000 late growing season. In the second set, pre and post
anthesis moisture deficits reduced grain yield by 77.6 and 95.8%, respectively, of well watered
condition while in the field, grain yields in the genotypes were highest for plantings made in April and
July (1.90 - 2.5 t/ha), lowest for August (0.7 -1.8 t/ha) when moisture deficit coincided with
reproductive phase. Yield stability exhibited under moisture deficit and on the field by 8522-2, Oba
super 2 and AK9943-DMRSR in the first set as well as DT-SR-Y C0 and DT-SR-W C0 in the second set,
indicates their suitability either as cultivars per se or as potential source of DT alleles for
development of DT maize varieties for Nigeria’s savanna ecologies.
China Aluminium Die Casting Moldmakingchinacasting
Shanghai iMolding is a recognized manufacturer of China delivering an extensive assortment of China aluminium die casting parts to numerous global industries.
Michael Gangadeen is an attorney from Ozone Park, New York. He has been practicing the law since graduating with his Juris Doctor from St. John's University School of Law. Before starting his own practice in 2000, Michael provided legal representation to State Farm clients.
Expert Accessory Dwelling Unit (ADU) Drafting ServicesResDraft
Whether you’re looking to create a guest house, a rental unit, or a private retreat, our experienced team will design a space that complements your existing home and maximizes your investment. We provide personalized, comprehensive expert accessory dwelling unit (ADU)drafting solutions tailored to your needs, ensuring a seamless process from concept to completion.
You could be a professional graphic designer and still make mistakes. There is always the possibility of human error. On the other hand if you’re not a designer, the chances of making some common graphic design mistakes are even higher. Because you don’t know what you don’t know. That’s where this blog comes in. To make your job easier and help you create better designs, we have put together a list of common graphic design mistakes that you need to avoid.
Dive into the innovative world of smart garages with our insightful presentation, "Exploring the Future of Smart Garages." This comprehensive guide covers the latest advancements in garage technology, including automated systems, smart security features, energy efficiency solutions, and seamless integration with smart home ecosystems. Learn how these technologies are transforming traditional garages into high-tech, efficient spaces that enhance convenience, safety, and sustainability.
Ideal for homeowners, tech enthusiasts, and industry professionals, this presentation provides valuable insights into the trends, benefits, and future developments in smart garage technology. Stay ahead of the curve with our expert analysis and practical tips on implementing smart garage solutions.
Hello everyone! I am thrilled to present my latest portfolio on LinkedIn, marking the culmination of my architectural journey thus far. Over the span of five years, I've been fortunate to acquire a wealth of knowledge under the guidance of esteemed professors and industry mentors. From rigorous academic pursuits to practical engagements, each experience has contributed to my growth and refinement as an architecture student. This portfolio not only showcases my projects but also underscores my attention to detail and to innovative architecture as a profession.
Book Formatting: Quality Control Checks for DesignersConfidence Ago
This presentation was made to help designers who work in publishing houses or format books for printing ensure quality.
Quality control is vital to every industry. This is why every department in a company need create a method they use in ensuring quality. This, perhaps, will not only improve the quality of products and bring errors to the barest minimum, but take it to a near perfect finish.
It is beyond a moot point that a good book will somewhat be judged by its cover, but the content of the book remains king. No matter how beautiful the cover, if the quality of writing or presentation is off, that will be a reason for readers not to come back to the book or recommend it.
So, this presentation points designers to some important things that may be missed by an editor that they could eventually discover and call the attention of the editor.
7 Alternatives to Bullet Points in PowerPointAlvis Oh
So you tried all the ways to beautify your bullet points on your pitch deck but it just got way uglier. These points are supposed to be memorable and leave a lasting impression on your audience. With these tips, you'll no longer have to spend so much time thinking how you should present your pointers.
Can AI do good? at 'offtheCanvas' India HCI preludeAlan Dix
Invited talk at 'offtheCanvas' IndiaHCI prelude, 29th June 2024.
https://www.alandix.com/academic/talks/offtheCanvas-IndiaHCI2024/
The world is being changed fundamentally by AI and we are constantly faced with newspaper headlines about its harmful effects. However, there is also the potential to both ameliorate theses harms and use the new abilities of AI to transform society for the good. Can you make the difference?
Unleash Your Inner Demon with the "Let's Summon Demons" T-Shirt. Calling all fans of dark humor and edgy fashion! The "Let's Summon Demons" t-shirt is a unique way to express yourself and turn heads.
https://dribbble.com/shots/24253051-Let-s-Summon-Demons-Shirt
1. Pelletterie CRISTIAN s.r.l.
di
Paolo Ceseri e Matteo Masi
Via Lisbona 3/5
Pontassieve (Florence)
50065 ITALY
Phone +39 055 836 70 43
Fax +39 055 831 41 66
Cod.Fis. e Part. IVA 00527590483
2. A little bit of History….
«Cristian» was founded in 1970 by Mr. Paolo Ceseri,
Mr. Enzo Masi and Mr. Sergio Pinzani.
Since then the Company has grown, obtaining many
aknowledgments from all around world for its high
quality products.
All this merit is due to an extraordinary cooperation
between an highly qualified staff and experts in their
individual field.
The main bulk of the Company’s produce is destined
for Foreign Markets, but not without dedicating
equal attention to the home-market.
3. Florentine Traditional Craftmenship
The craft work, preserved over the years, has
allowed «Cristian» to maintain its position in the
world of leather goods.
Our Leather goods are completely handmade in
Florence, Italy.
Our highly qualified staff follow the art and
tradition of Florentine craftsmenship.
5. Young and Classical Trends
«Cristian» means young fashion, current
trends, but also sports fashion and original
deigns….
…without forgetting the Classic.
6. Some examples of our work…
These totes have a classic,
structured silhouette, top handle
and roomy interior, but them has
modern and young details as the
perforated panel or the contrast
color stripes that raises our totes
to another level.
7. Envelope Clutches: the perfect size for
your evenings.
Structured bag with grab handles.
Clutch with an asymmetric front flap
Some examples of our work…
8. Classical quilted bags inspired to
the timeless Chanel.
Shoulder bags with a classical
quilting and gold details as the
adjustable chain.
Some examples of our work…