The document discusses the design of three ship prototypes. For each prototype, it outlines the materials, tools, functions, and social/environmental considerations. Steel plate is identified as the primary material for its strength and flexibility. Complex tools and specialized skills are needed for construction. The main function is to carry people and cargo across water. Safety, durability and limiting emissions are design priorities. Group members collaborated on different aspects - some designed the ship shape while others focused on complex screw placements. Building the large ship prototype would require many people and huge equipment due to its size.
Raymond Payne: How to Build a Computer - Hardware BasicsRaymond Payne
Have you ever wanted to build your own computer, but had absolutely no idea where to start? Fret not! Raymond Payne gives you the inside scoop on how to build a working computer from the ground up. This presentation provides you with some of the most basic knowledge: what hardware goes into a computer. Check back later for more lessons on building a computer.
Raymond Payne: How to Build a Computer - Hardware BasicsRaymond Payne
Have you ever wanted to build your own computer, but had absolutely no idea where to start? Fret not! Raymond Payne gives you the inside scoop on how to build a working computer from the ground up. This presentation provides you with some of the most basic knowledge: what hardware goes into a computer. Check back later for more lessons on building a computer.
PART 1: Alternative building techniques- we use on site materials to keep costs low, sand or subsoil, 50% rice hull for high R walls, which requires a stabiliser. Pneumatic tampers can work also, moist clay and sand become in effect sandstone, no stabiliser needed, but less insulation.
On the broad open ocean, sunset hues the water with a mild crimson hue. Different sorts of ships are out sailing, as it is gentle cursing local weather in which to head a boat on the open ocean. These ships discover grand outlines as the dingy shadows lie against the sunset.
Using bushes to construct model ships is as a substitute clearly beneficial as wooden is energy effective. So, constructing wooden model ships is an awesome idea.
PART 1: Alternative building techniques- we use on site materials to keep costs low, sand or subsoil, 50% rice hull for high R walls, which requires a stabiliser. Pneumatic tampers can work also, moist clay and sand become in effect sandstone, no stabiliser needed, but less insulation.
On the broad open ocean, sundown colorations the water with a gentle crimson hue. Different kinds of ships are out sailing, as it is gentle cursing climate in which to head a boat on the open ocean.
The boat in which you travel, ever wondered how it is created? If no then it is to be notified to you that there are many kinds of methods available for creating the boat that ferries you from one place to another.
Dive into the innovative world of smart garages with our insightful presentation, "Exploring the Future of Smart Garages." This comprehensive guide covers the latest advancements in garage technology, including automated systems, smart security features, energy efficiency solutions, and seamless integration with smart home ecosystems. Learn how these technologies are transforming traditional garages into high-tech, efficient spaces that enhance convenience, safety, and sustainability.
Ideal for homeowners, tech enthusiasts, and industry professionals, this presentation provides valuable insights into the trends, benefits, and future developments in smart garage technology. Stay ahead of the curve with our expert analysis and practical tips on implementing smart garage solutions.
PART 1: Alternative building techniques- we use on site materials to keep costs low, sand or subsoil, 50% rice hull for high R walls, which requires a stabiliser. Pneumatic tampers can work also, moist clay and sand become in effect sandstone, no stabiliser needed, but less insulation.
On the broad open ocean, sunset hues the water with a mild crimson hue. Different sorts of ships are out sailing, as it is gentle cursing local weather in which to head a boat on the open ocean. These ships discover grand outlines as the dingy shadows lie against the sunset.
Using bushes to construct model ships is as a substitute clearly beneficial as wooden is energy effective. So, constructing wooden model ships is an awesome idea.
PART 1: Alternative building techniques- we use on site materials to keep costs low, sand or subsoil, 50% rice hull for high R walls, which requires a stabiliser. Pneumatic tampers can work also, moist clay and sand become in effect sandstone, no stabiliser needed, but less insulation.
On the broad open ocean, sundown colorations the water with a gentle crimson hue. Different kinds of ships are out sailing, as it is gentle cursing climate in which to head a boat on the open ocean.
The boat in which you travel, ever wondered how it is created? If no then it is to be notified to you that there are many kinds of methods available for creating the boat that ferries you from one place to another.
Dive into the innovative world of smart garages with our insightful presentation, "Exploring the Future of Smart Garages." This comprehensive guide covers the latest advancements in garage technology, including automated systems, smart security features, energy efficiency solutions, and seamless integration with smart home ecosystems. Learn how these technologies are transforming traditional garages into high-tech, efficient spaces that enhance convenience, safety, and sustainability.
Ideal for homeowners, tech enthusiasts, and industry professionals, this presentation provides valuable insights into the trends, benefits, and future developments in smart garage technology. Stay ahead of the curve with our expert analysis and practical tips on implementing smart garage solutions.
Hello everyone! I am thrilled to present my latest portfolio on LinkedIn, marking the culmination of my architectural journey thus far. Over the span of five years, I've been fortunate to acquire a wealth of knowledge under the guidance of esteemed professors and industry mentors. From rigorous academic pursuits to practical engagements, each experience has contributed to my growth and refinement as an architecture student. This portfolio not only showcases my projects but also underscores my attention to detail and to innovative architecture as a profession.
White wonder, Work developed by Eva TschoppMansi Shah
White Wonder by Eva Tschopp
A tale about our culture around the use of fertilizers and pesticides visiting small farms around Ahmedabad in Matar and Shilaj.
Transforming Brand Perception and Boosting Profitabilityaaryangarg12
In today's digital era, the dynamics of brand perception, consumer behavior, and profitability have been profoundly reshaped by the synergy of branding, social media, and website design. This research paper investigates the transformative power of these elements in influencing how individuals perceive brands and products and how this transformation can be harnessed to drive sales and profitability for businesses.
Through an exploration of brand psychology and consumer behavior, this study sheds light on the intricate ways in which effective branding strategies, strategic social media engagement, and user-centric website design contribute to altering consumers' perceptions. We delve into the principles that underlie successful brand transformations, examining how visual identity, messaging, and storytelling can captivate and resonate with target audiences.
Methodologically, this research employs a comprehensive approach, combining qualitative and quantitative analyses. Real-world case studies illustrate the impact of branding, social media campaigns, and website redesigns on consumer perception, sales figures, and profitability. We assess the various metrics, including brand awareness, customer engagement, conversion rates, and revenue growth, to measure the effectiveness of these strategies.
The results underscore the pivotal role of cohesive branding, social media influence, and website usability in shaping positive brand perceptions, influencing consumer decisions, and ultimately bolstering sales and profitability. This paper provides actionable insights and strategic recommendations for businesses seeking to leverage branding, social media, and website design as potent tools to enhance their market position and financial success.
2. We have designed the ship.
We can easily be designed because the ship is
large.
Find the blog that introduces the Lego, was
chosen from there.
The ship is easy to imagine, design is simple, we
have added the arrangement.
Looking for a real photo, it was designed by an
imaginary a fine place.
Introduction
3. This prototype is ship which called Titanic.
In the real, Titanic ship is pretty huge.
Titanic was made in England at 1912, and
it was most biggest ship in that year.
Titanic's first voyage is very famous.
Titanic was Sunken in than voyage.
This happening was very shocking all over
the world. This happening killed people
about 1500.
This episode became famous by movie in
1997. It movie filmmaker is James Francis
Cameron.
1st
Product Prototype Tinkercad
4. 123D Design is a 3D CAD for Autodesk, Inc., engaged in the
development and sales of CAD, including such as AutoCAD
was developed for individuals. 123D Design will be a solid
modeler. Therefore, it will be the software to continue to
create a firm shape of the 3D model from the dimensions as
machine parts.
Because the basic modeling is replete, if functional
components, it will be make most things.
"Autodesk123D" series at the time in February 2013, is
divided into five application (software).
1, Make the 3D data from the photo "123D Catch" tool.
2, fantastic character a can be designed in iPad "123D
Creature" tool.
3, Easy 3D modeling can be using the PC and the Web,
"123D Design" tool.
3, Make a model by slicing the 3D data "123D Make" tool.
5, 3D design can be in the iPad "123D Sculpt" tool.
2nd
Product Prototype 123D Design
5. I was a ship designed using 123D Make.
The main function of the 123D Make is to edit the 3D model
data.
So, I took advantage of the model data that was designed in
123D Design.
123D Make it is possible to make the design specifications,
when a 3D printing.
3D print of the design specifications can be made in a
variety of ways.
For example, it can be a structure, such as piled up
cardboard cut also many pieces.
This can be made even design document that was piled up
cardboard in a more complex three-dimensional structure.
These can be adjusted, such as density and the number of
cardboard.
3rd
Product Prototype 123D Make
6. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 1st
Product Prototype
7. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 1st
Product Prototype
8. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 1st
Product Prototype
9. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 1st
Product Prototype
10. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 1st
Product Prototype
11. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 2st
Product Prototype
12. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 2st
Product Prototype
13. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 2st
Product Prototype
14. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 2st
Product Prototype
15. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 2st
Product Prototype
16. ・What materials will be most suitable?
Typically, the main body of ship is steel plate.
Our ship also will made of steel plate too.
・Which material is available?
This is as described above, the steel sheet is most appropriate.
The main material of the order ship is steel plate.
・What physical properties should the material possess?
Steel plate is malleable.
Thus, it is possible to determine the shape flexibility.
・Should the material be durable?
Ship of material durability is very important.
In order to move the water, this is a must which does not rust easily.
・Is color an important feature for the project?
It is not important color.
But there is a need to use the paint to rust.
Materials for the 3st
Product Prototype
17. ・What tools and equipment would be needed?
The ship requires a lot of tools.
Equipment for processing the mainly steel plate is required.
・Would the construction require any special skill?
This can not be built by people who do not have the technology.
This requires the skills of special skill.
・Would the object need attachment like stands and handles?
The ship is located in important objects are several.
Engine, left rudder and deck.
・If yes, how would they be attached?
Of these bonds have been different each.
For example, left rudder is self-contained and deck requires welding.
・What shape would these attachment be?
These parts are a form suitable for each use.
Constructions for the 3st
Product Prototype
18. ・What would be the main function of the object?
This is a ship.
So, this will carry people and luggage, across the sea and rivers.
・What will be the size of the object?
The size of the ship There are several.
This time, the ship that we develop is big.
・How heavy should it be?
This is also different depending on the size.
But the ship that we develop is big. Therefore it will be heavy.
・What would be the mode of operation? Mechanical? Electrical?
This also depends on the ship to develop.
For example, you can wind to power, or to the engine power.
Ship of power that we develop is the engine.
・How will the object be supported?
Each ship of the parts will support improvement of the performance of this ship.
Some of the parts requires specialized technology.
Functions for the 3st
Product Prototype
19. ・What shape/form should the object take?
The main colour is red. We will design the large vessels.
・Is surface texture an important aspect of the object?
Our ship's exterior will use the steel plate.
This is an important exterior of the ship.
・Is colour a vital issue to be considered?
We are planning to build a red ship.
But, our design is not important the colour.
・If colour is important, what should be the most appropriate colour?
Not important.
・How can you make the object safe to use?
To ensure the safety, strength and durability and rust difficulty is important.
Appearance for the 2st
Product Prototype
20. ・Will the manufacture of the product have a detrimental effect on the people and environment?
Yes. However, the structure for holding down the emissions to a minimum is considered.
・What effect would the waste produced have on the people and environment?
Exhaust gas is along with the car's one.
Therefore, global warming, such as carbon dioxide emissions can be a problem.
・Would the waste be used as fuel or recycled?
No. The main energy of this ship will be in gasoline.
Therefore, the energy of the recycling would be difficult.
・If the waste would be used as fuel, will it be safe and economical to use?
Not use a used as fuel.
・Will the product be safe to use?
Of course, we will do a safe ship design up to.
We will review a number of design for that.
Social Environmental Factors for the 3st
Product Prototype
21. Develop a product specifications list
・Parts In buildwithchrome was small.
・I created a rough outline.
・It was created and is divided into
three main parts.
・They are color-coded.
22. First major step in the assembly process
we assembled base. Shape of
Bottom of ship is not flat. It is
Cylinder.
we assembled one of the most
important part. It is propeller which to
move this ship.
In the real life, this part rotate and
moving ship.
23. 2nd major step in the assembly process
It was difficult it is to match the
foundation and the size.
It was devised to cover the portion of
the propeller.
I made a part where people ride. It
was hard to make a handrail.
I think it was devised to adjust the
size.
24. Third major step in the assembly process
I will cut the skeleton.
123D Make can adjust the amount of
skeleton.
I will continue to gradually increase
the amount of skeleton.
I can check the width in this step.
25. 4th major step in the assembly process
I will continue to further increase the
skeleton.
Although roughly the shape has been
formed, but chimney's balance is
unstable.
Fine model of generation has
finished.
It is completed by adjusting the
details.
26. Identify three important problems
・Using the software is very difficult.
(123D design,123D Make)
・Screw design has been difficult.
Because it is an important part was
created carefully.
・It was difficult to design so as not
to disturb the overall balance.
27. Group members collaborate
s1200037 青柳裕真(Yuma Aoyagi)& s1200129 鈴木裕貴(Yuki Suzuki)
We have instructions to the team members.
We thought the design of the ship.
We have designed the ship on 3D Make.
Because of the design is the ship, it was the image of the sea this site.
Choosing the color of the ship is our job.
s1200104 齋藤祐輔(Yusuke Saito) & s1210230 荒井大和(Hirokazu Arai)
We have designed the ship on Tinkercad and 3D desin.
The most hard part is the place of the screw.
We was in as much as possible complex designs.
In order to complex design, it was designed from finely divided parts.
Therefore, I was able to make the ideal design.
28. CONCLUSION
The ship is so big.Therefore we will
need to do a huge equipment.
The following is required material.
Hard material of iron and aluminum is
required.
It will become a large-scale assemble.
Many people will need.