The document provides instructions for migrating satellite television subscribers from the Agila II satellite to the Koreasat 5 satellite within 3 months. Contractors are given orientation on locating subscribers' dishes and realigning them to the new satellite frequency and position. Detailed steps are provided for reprogramming receivers for the DAW-Mini 4400/5400, Homecast, Hyundai-Crystal, and ViStar models to receive signals from Koreasat 5 at frequencies 12390 MHz, 12430 MHz, and 12470 MHz.

1. SATELLITE MIGRATION PROJECT
Contractor Orientation
DreamSatellite.com

2. 2
OBJECTIVE
• Locate active subscribers in assigned area and
re-align or relocate their satellite dish to
Koreasat 5.
• Accomplish migration of subscribers to new
satellite within 3-months.

3. 3
REASON FOR MIGRATION
• Agila II has approximately 2 years left in the
orbit.
• Koreasat 5 was launched last August 2006 and
has a lifespan of 15 years (until 2021) in the orbit.

4. 4
SATELLITE ORIENTATION
ANTENNA DISH ORIENTATION
SATELLITE AGILA II KOREASAT 5
Longitude 146° E 113° E
Antenna Direction:
• Azimuth 120° SE 208° SW
• Elevation 60° 70°
120 deg SE
AZIMUTH
208 deg SW
ELEVATION
LNB 6-7 o’clock 5 o’clock

5. 5
SATELLITE FREQUENCY
DAW-Mini 4400/5400
1. Press “menu” button and select 2. Go to “factory reset” and press “ok”.
“installation”.

6. 6
SATELLITE FREQUENCY
DAW-Mini 4400/5400
3. Enter “access code”, default is “1234”. 4. Select and press “ok”, wait for the
Philippine Multi-Media System, Inc.
Logo.

7. 7
SATELLITE FREQUENCY
DAW-Mini 4400/5400
5. The “first installation” prompt will 6. Under “equipment” menu, select
appear, press “ok”. “none” and press “ok”.

8. 8
SATELLITE FREQUENCY
DAW-Mini 4400/5400
7. Under “channel search menu”, select 8. Select “Add TP” by pressing the “blue
“manual” by pressing “green button” button” on the remote control.
on the remote control.

9. 9
SATELLITE FREQUENCY
DAW-Mini 4400/5400
9. Select row of added TP (with check) 10. Enter new frequency “12390” and
and go to “freq” column, press “ok” to press “ok”.
edit frequency.

10. 10
SATELLITE FREQUENCY
DAW-Mini 4400/5400
11. Go to “S/R” column, press “ok” to edit 12. Go to “pol” column, press “ok” to edit
symbol rate. Enter symbol rate polarity to “v” (vertical).
“25600” and press “ok”.

11. 11
SATELLITE FREQUENCY
DAW-Mini 4400/5400
13. Repeat steps 8-12 but enter the 14. Repeat steps 8-12 but enter the
frequency “12430” in step 10. frequency “12470” in step 10.

12. 12
SATELLITE FREQUENCY
DAW-Mini 4400/5400
15. Press “exit” on remote. Select 16. Unit will perform “channel scan”,
“network” by pressing “yellow button” after completion press “exit”.
on the remote control.

13. 13
SATELLITE FREQUENCY
DAW-Mini 4400/5400
17. A “warning” prompt will appear, press 18. Press “exit” to view channels.
“ok” to save.

14. 14
SATELLITE FREQUENCY
Homecast
1. Press “menu”, select “installation” and 2. Select “factory reset” and press “ok”.
press “ok”.

15. 15
SATELLITE FREQUENCY
Homecast
3. Enter the “access code”, default is 4. A prompt will appear, select “yes” and
“1234”. press “ok”.

16. 16
SATELLITE FREQUENCY
Homecast
5. Wait for the Dream Satellite TV Logo 6. Go to “dish setup” and press “ok”.
to appear. Press “menu”, select
“installation” and press “ok”.

17. 17
SATELLITE FREQUENCY
Homecast
7. Enter “access code”, default is “1234”. 8. Under “transponder”, press “right
navigation key” on remote control.

18. 18
SATELLITE FREQUENCY
Homecast
9. Select “new TS” and press “ok”. 10. Enter the following parameters:
a. Frequency - 12390
b. Polarity - Vertical
c. Symbol Rate - 25600

19. 19
SATELLITE FREQUENCY
Homecast
11. Press “ok” twice. Under “installation”, 12. Select “frequency” and press “right
select “manual search” and press “ok”. navigational key” on remote control.
Select the “new frequency” added and
press “ok”.

20. 20
SATELLITE FREQUENCY
Homecast
13. Go to “network search” and press 14. Press “ok” and a display will show “do
“right navigational key” to “enable” you want to save changes?”, select “yes”
setting. and press “ok”.

21. 21
SATELLITE FREQUENCY
Homecast
15. Press “exit” button. 17. Repeat steps 6-15 but enter the
16. Under installation. Repeat steps 6-15 frequency “12470” in step 11.
but enter the frequency “12430” in
step 11.

22. 22
SATELLITE FREQUENCY
Hyundai-Crystal
1. Press “menu”, select “installation” and 2. Select “factory set” and press “ok”.
press “ok”.

23. 23
SATELLITE FREQUENCY
Hyundai-Crystal
3. A prompt will appear “do you want to 4. The “first installation” prompt will
reset all data?”, press “ok” for “yes”. appear, press “ok” to save.

24. 24
SATELLITE FREQUENCY
Hyundai-Crystal
5. Wait for “scanning progress” to finish. 6. Press “menu”, select “installation” and
Press “exit” button. press “ok”.

25. 25
SATELLITE FREQUENCY
Hyundai-Crystal
7. Select “LNB configuration” and press 8. To “add new” satellite, press “red
“ok”. button” on the remote control.

26. 26
SATELLITE FREQUENCY
Hyundai-Crystal
9. A prompt will appear “do you want to 10. Press “exit” button. Under
add a satellite?”, press “ok” for “yes”. “installation window, select “TP
edit/scan” and press “ok” button.

27. 27
SATELLITE FREQUENCY
Hyundai-Crystal
11. Enter the following parameters: 12. Select “scan” and press “ok” (Do not
a. TP Frequency - 12390 GHz press “exit” while scanning is in
b. Polarization - Vertical 14V progress).
c. Symbol Rate - 25600 MSPS

28. 28
SATELLITE FREQUENCY
Hyundai-Crystal
13. After scanning, repeat steps 11-12 but 14. Repeat steps 11-12 but enter the
enter the frequency “12430” in step 11. frequency “12470” in step 11.

29. 29
SATELLITE FREQUENCY
Hyundai-Crystal
15. Press “exit” after scanning has been 16. Under “scan”, select “all network scan
completed. Under “installation”, select start” then press “ok” button.
“scan” and press “ok”.

30. 30
SATELLITE FREQUENCY
Hyundai-Crystal
17. You will see the scanning progress. 18. Exit the installation view by pressing
After scanning is done, press “ok”. the “exit” button four (4) times.

31. 31
SATELLITE FREQUENCY
ViStar
1. Press “menu”, select “system 2. Enter 4-digit “access code”, default is
configuration” and press “ok”. “1234”.

32. 32
SATELLITE FREQUENCY
ViStar
3. Select “factory default” and press “ok”. 4. Enter 4-digit “access code”, default is
“1234”.

33. 33
SATELLITE FREQUENCY
ViStar
5. A prompt will appear, “do you want to 6. The “welcome” prompt will appear,
reset receiver?”, press “ok”. press “ok”.

34. 34
SATELLITE FREQUENCY
ViStar
7. The “LNB configuration” window will 8. The “Add channels” window will
appear, press “ok”. appear, enter the following
parameters:
a. Frequency - 12390000
b. Symbol Rate - 25600
c. Polarization - 14V
d. Search Type - Network

35. 35
SATELLITE FREQUENCY
ViStar
9. Press “ok” to search channels. The 10. To add another frequency, repeat
message “Searching in process, please steps 8-9 but enter the frequency
wait” will appear. After search is “12430000” in step 8 under “TP2”.
completed, press “ok” to finish.

36. 36
SATELLITE FREQUENCY
ViStar
11. Repeat steps 8-9 but enter the 12. Press “exit” to finish.
frequency “12470000” in step 8 under
“TP3”.

37. 37
FORMS & FORMATS
JOB ORDER FORM
Control No.:
Installer Name : Dealer :
Subscriber Name : Subscriber Contact No. :
Address :
Items Replaced :
Low Noise Block (LNB) Converter Others :
Antenna Dish
Bracket
RG-6 Cable
I certify that that the Out-Door-Unit (ODU) has been re-aligned/relocated and my unit is working properly.
Subscriber/Representative Name & Signature