Focal Spot Verifier CIS X-Ray system for Counferfeit detection.

1. Verifier
Component Inspection Series for
Component Authentication
(858) 536-5050 | www.focalspot.com

2. Component Inspection Series
Advanced System
(858) 536-5050 | www.focalspot.com

3. Overview
Dual Monitors
X-Ray Monitor. Shows Stored Golden
Part X-Ray Image and Live X-ray Image
for Comparison inspection.
Reel to Reel Holders and Drive Motors
(Forward, Backward, with Speed Control)
Automatic Matching Software
Camera Monitor. Shows Stored Optical
Image of Golden Part and Live Optical
Inspection.
3

4. Overview. Advanced CIS
 High Resolution X-Ray Tube:
75kV 45 micron, 90kV 5 micron, or 130kV 5 micron
 High Resolution Dual 2”/4” Image Intensifier and Direct
Couple CCD Camera with Zoom Lens
 Variable Magnification Image Train Spine allows both high
magnification and large field of view
 Material Handling Systems
Tape and Reel
Belt Conveyor for Tubes
XY Table for Jedec Trays or Individual Parts
Standard Individual Component or PCB Inspection at Higher
Magnifications.
 Portable Cabinet Style. Lots of Access
 Dual Monitor Inspection – X-Ray & Optical
Live X-ray Image and Compare with Stored Golden Part
4 Live Optical Image and Compare with Stored Golden Part.

5. Handles Tape & Reel.
 Design allows for plug and play
1. Tape and Reel System. Handles: 7, 13, and 21” inch reels.
 Accommodates Tape sizes from 8mm to 44 mm with adjustable pitch
positioning. Variable speed control. The Indexer will allow for Automated
Insepction of Parts in Tape and Reel.
5

6. Handles Tape and Reel and Tubes.
 Design allows for plug and play of two unique handlers:
1. Component Tube Inspection via Belt Conveyor.
 Variable width and locking. Variable speed control.
6

7. Handles Tubes.
 Design allows for plug and play of two unique handlers:
1. Component Tube Inspection via Belt Conveyor.
 Variable width and locking. Variable speed control.
7

8. Automatic Matching Software
Matching Software Scores Reference Image Regions of
Interest to Live Image to Detect Counterfeit Parts
8

9. Component Inspection Series
Standard System
(858) 536-5050 | www.focalspot.com

10. Overview – Standard CIS
Single Monitor
• Dual Monitors Optional
X-Ray Monitor. Shows Stored Golden
Part X-Ray Image and Live X-ray Image
for Comparison inspection.
Reel to Reel Holders and Drive Motors
(Forward, Backward, with Speed Control)
Belt Conveyor for Tape & Reel and Tubes.
XY Table for Jedec Trays or PCB
Inspection.
Automatic Matching Software
Optional Dual View Inspection.
• Camera Monitor. Shows Stored Optical
Image of Golden Part and Live Optical
Inspection.
• Exceeds Radiation Safety Standards
CDRH 1020.40
10

11. Overview. Standard CIS
 High Resolution X-Ray Tube:
75kV 45 micron, 90kV 5 micron, or 130kV 5 micron
 High Resolution Dual 2”/4” Image Intensifier and Direct
Couple CCD Camera with Zoom Lens
 Fixed Geometric Magnification.
 Material Handling Systems
Tape and Reel
Belt Conveyor for Tubes
XY Table for Jedec Trays or Individual Parts
Standard Individual Component or PCB Inspection at Higher
Magnifications.
 Portable Cabinet Style. Lots of Access
 Optional Dual Monitor Inspection – X-Ray & Optical
Live X-ray Image and Compare with Stored Golden Part
Live Optical Image and Compare with Stored Golden Part.
11

12. Handles Tape and Reel and Tubes.
 Design allows for plug and play of the material handler:
1. Belt Conveyor for Tape and Reel and Tubes.
 Variable width and locking. Variable speed control.
 Optional: Tape and Reel Indexer. (For Automated Inspection)
12

13. Handles JEDEC Trays and Individual Parts
 Standard XY table handles provides 16.5 in x 16.5 in
inspectable area for JEDEC Trays.
13