Click the icon to view ne able of de More Info Fluid Density Height o.pdf

•

0 likes•2 views

Click the icon to view ne able of de More Info Fluid Density Height of fluid Surface Pressure Total Pressure [3] [atm] 3 5.3 kg /m [ft] [atm] 50 1,265 Print Done Enter you Solution 1)total Pressure = surface pressure+ denisty*acceleration due to gravity* height 3-2= density*9.81*50*0.3048 density = 0.006688766*101325= 677kg/m3 2) 1.3*101325 = 1265*9.81*height height = 10.61 m = 34.8 ft.

Functionally important traits in animals tend to vary little from one individual to the next within populations, possible because individuals that deviate too much from the mean die sooner or leave fewer offspring in the long run. If so, does variance in a trait rise after it becomes less functionally important? Billet et al. (2012) investigated this question with the semicircular canals (SC) of the inner ear of the three-toed sloth (Bradypus variegatus). Sloths move very slowly and infrequently, and the authors suggested that this behavior reduces the functional demands on the SC, which usually provide information on angular head movement to the brain. Indeed, the motion signal from the SC to the brain may be very weak in sloths as compared to faster-moving animals. The following numbers are measurements of the length to the width of the anterior semicircular canals in seven sloths. Assume that this represents a random sample. 1.52, 1.06, 0.93, 1.38, 1.47, 1.20, 1.16 a. In related, faster-moving animals, the standard deviation of the ratio of the length to the width of the anterior semicircular canals is known to be 0.09. What is the estimate of the standard deviation of this measurement in three toed sloths? b. Based on these data, what is the most plausible range of values for the population standard deviation in the three-toed sloth? Does this range include the known value of the standard deviation in related, faster-moving species? c. What additional assumption is required for your answer in (b)? What do you know about how sensitive the confidence interval calculation is when the assumption is not met? Solution.

Find the values of the trigonometric functions of t from the given in.pdf

trishacolsyn25353

Find the values of the trigonometric functions of t from the given information. tan(t) = - 8/15, cos(t) > 0 sin(t) = cos(t) = CSC (t) = sec(t) = cot(t) = Solution Here w ehave tan(t) = 8/15 and we know tan() = Perpendicular/Base so we have Perpendicular = 8 and Base = 15 , now we can calculate Hypotenuse from these values hynpotenuse2 = perpendicular2 + base2 hypotenuse2 = 8*8+15*15 hypotenuse2 = 289 (64+225) hypotenuse = 17 (sqaure root of 289) Now we will get the value of other functions sin(t) = Perpendicular/Hynpotenuse sint(t) = 8/17 cost(t)= Base/Hynpotenuse cost(t) = 15/17 csc(t) = Hynpotenuse/Perpendicular csc(t) = 17/8 sec(t) = Hynpotenuse/Base sec(t) = 17/15 cot(t) = Base/Perpendicular cot(t0 = 15/8.

Explain how the skeletal system is more than just bonesbone tissue..pdf

trishacolsyn25353

Explain how the skeletal system is more than just bones/bone tissue. (2 marks) Solution Skeletal system = The body is supported within or around by ahard framework called skeleton skeleton system does not consists bones or bone tissues IT is made from number of bones , joints ,tendons . ligaments ,diaphysis, Epiphysis , Human skeleton is of 2 types 1] Axial skeleton = Consists of 80 bones consists of skull, vertebral column , thoracic cage Skull- formed by 28 bones verte. column- consists of 33 small ring like vertebrae called vertebae thoracic cage= consists of 12 pairs of ribs & sternum 2] Appendicular skeleton = consists of 126 bones consists of bones of girdle & limbs Joints = A place where 2 or more bones articulated to one another called as joints Diaphysis= Shaft of long bone containing a canal filled with yellow bone marrow Ligaments = fibrous connective tissue that connects bone to bone Osteoblast= Are principle bone building cells Peristomeum= Dense fibrous membrane covering the surface of bones except joints Tendons = Are tough inelastic tissue that attaches muscles to bones.

Digitization introduces quantization errors that cannot be removed b.pdf

trishacolsyn25353

Digitization introduces quantization errors that cannot be removed by repeaters. Solution . Yes, Digitization introduces quantization errors that cannot be removed by repeaters Quantization error introduces by quantization in the analog to digital conversion in telecommunication systems and signal processing. It is a rounding error among the analog input voltage to the analog to digital and the output digitized value.

Design, implement, test(In Java ) a doubly linked list ADT, using DL.pdf

trishacolsyn25353

Design, implement, test(In Java ) a doubly linked list ADT, using DLLNode objects as the nodes. In addition to our standard list operations, your class should provide for backward iteration through the list. To support this operation, it should export a resetBack method and get a getPrevious method.To facilitate this, you may want to include an instance variable last that always references the last element on the list. DLLNODE.java public class DLLNode extends LLNode { private DLLNode back; public DLLNode(T info) { super(info); back = null; } public void setBack(DLLNode back) // Sets back link of this DLLNode. { this.back = back; } public DLLNode getBack() // Returns back link of this DLLNode. { return back; } } LLNODE.java public class LLNode { private LLNode link; private T info; public LLNode(T info) { this.info = info; link = null; } public void setInfo(T info) // Sets info of this LLNode. { this.info = info; } public T getInfo() // Returns info of this LLONode. { return info; } public void setLink(LLNode link) // Sets link of this LLNode. { this.link = link; } public LLNode getLink() // Returns link of this LLNode. { return link; } } This list can be an unsorted list. My professor suggested to reference off the RefUnsortedList ADT and modifying it to be a doubly linked list.you need to create resetBack and getPrevious methods which means you will need another variable to keep track of where you are in the backward iteration. It is not correct to use currentPos to keep track of the backward iteration, so make another variable (reference) for this, maybe call it currentBackPos. RefUnsortedList.java public class RefUnsortedList implements ListInterface { protected int numElements; // number of elements in this list protected LLNode currentPos; // current position for iteration // set by find method protected boolean found; // true if element found, else false protected LLNode location; // node containing element, if found protected LLNode previous; // node preceeding location protected LLNode list; // first node on the list public RefUnsortedList() { numElements = 0; list = null; currentPos = null; } public void add(T element) // Adds element to this list. { LLNode newNode = new LLNode(element); newNode.setLink(list); list = newNode; numElements++; } protected void find(T target) // Searches list for an occurence of an element e such that // e.equals(target). If successful, sets instance variables // found to true, location to node containing e, and previous // to the node that links to location. If not successful, sets // found to false. { location = list; found = false; while (location != null) { if (location.getInfo().equals(target)) // if they match { found = true; return; } else { previous = location; location = location.getLink(); } } } public int size() // Returns the number of elements on this list. { return numElements; } public boolean contains (T element) // Returns true if this list contains an element e such that // e.equals(el.

Describe how caregivers can promote maximum independence among peopl.pdf

trishacolsyn25353

Describe how caregivers can promote maximum independence among people with functional impairments. Give two examples and explain your reasoning. Solution Caregivers should assist the areas in which the patient is unable to do things for himself or herself. Medical care delivery should focus on patient’s mental, social, and spiritual needs and preferences.The main Human factors like caring, compassion,patient dignity, latitude to govern one’s affairs, and privacy are some important daily practices that should be taken care of by caregivers..

An Hfr strain that is met+pro+bio+his+ was mated with an F- strain t.pdf

trishacolsyn25353

An Hfr strain that is met+pro+bio+his+ was mated with an F- strain that was met-pro-bio-his-. Mating was interrupted and the percentage of cells with each phenotype was determined by replica plating the cells on minimal media plates that lacked met, pro, bio or his. The data shown in Figure 1 were obtained. During conjugation, cells gain genes in the order they occur in the donor cell chromosome. Genes that are near the origin of transfer will be transferred first. Use the graph to help you construct a map of the four genes. (Figure 2) Drag the genes onto the map in the proper order. Minutes 10 12 15 20 Percentage Percentage Percentage Percentage of cells with of cells with of cells with of cells with bio his met pro phenotype phenotype phenotype phenotype 7 0 0 2 25 15 3 20 40 28 42 17 35 25 Solution Answer: Origin - met+ - his+ - pro+ - bio+ Explanation: As we know that during conjugation, cells gain genes in the order they occur in the donor cell chromosome. Genes that are near the origin of transfer will be transferred first. From the graph it is clear that met+ gene transfer first and goes on increasing its percentage as time passes. so it is present closest to the origin. Then his+ gene shows more percentage transfer than pro+ gene and atlast bio+ gene transfers..

A uniform plane wave propagates in the y direction in air with its el.pdf

trishacolsyn25353

A uniform plane wave propagates in the y direction in air with its electric field oriented in the z direction. At t = 0, the electric field of the wave has a maximum value of 100 milliVolts/m at a position y = 1 m and an adjacent value of -100 milliVolts/m at a position of y = 2.25 m. Write down the expression for the instantaneous electric field intensity E^rightarrow(y, t). Include the proper dimensional units. Sketch E^rightarrow(y) at t = 0 and t = 12.5 ns in three dimensional (3-D axis) diagram. Add the instantaneous magnetic field H^rightarrow(y) at t = 0 and t = 12.5 ns to your sketches. Sketch E^rightarrow (t) at y = 0 and y = 12.5 m. An observer measures E^rightarrow(t) at y = 12.5 m, starting at t = 0. Find the first time instant at which the observer measures a maximum electric field intensity. Solution Instantaneous electric energy and electric power dissipation in dispersive media Wonseok Shin,1 Aaswath Raman,2 and Shanhui Fan1,* 1 Department of Electrical Engineering, Stanford University, Stanford, California 94305, USA 2 Department of Applied Physics, Stanford University, Stanford, California 94305, USA *Corresponding author: shanhui@stanford.edu Received November 14, 2011; revised December 26, 2011; accepted December 27, 2011; posted January 5, 2012 (Doc. ID 158103); published April 24, 2012 We derive the instantaneous densities of electric energy and electric power dissipation in lossless and lossy dispersive media for a time-harmonic electric field. The instantaneous quantities are decomposed into DC and AC components, some of which are shown to be independent of the dispersion of dielectric constants. The AC component of the instantaneous energy density can be used to visualize propagation of electromagnetic waves through complex 3D structures. © 2012 Optical Society of America OCIS codes: 260.2110, 260.2030, 260.3910. 1. INTRODUCTION Understanding the forms of the densities of energy and power dissipation in dispersive media has been a topic of interest for decades [1–4] and has found renewed interest recently due to the development of metamaterials [5–11]. When electric dispersion is concerned [12], a dispersive medium is characterized by a frequency-dependent dielectric constant 0 i 00. Assuming a time-harmonic electric field (E-field) Et E0eit , it is well-known that in a lossless dispersive medium, where 00 0, the time average of the electric energy density is [3] ue 1 4 d d jE0j 2. (1) The time average of the electric energy density is known also in a lossy dispersive medium, where 00 > 0, provided that the medium is a Lorentz medium, i.e., described by a Lorentz pole [2,6,8,13]. In addition, the time average of the electric power dissipation density in a lossy dispersive medium is [3] qe 1 2 00 jE0j 2; (2) which holds for any lossy dispersive medium including the Lorentz medium. Most of the previous works on electric energy and power dissipation have focused on the time- averaged quantities [Eq. (1) and Eq. (2)]. The.

A student wanted to look at germination of five different seeds in vermiculite (a soil additive). He planted the seeds in identical containers and left them together in full sunlight. He gave each seed the same amount of water and charted the germination of each seed type. What is the dependent variable in this experiment? vermiculite germination rate seed type light amounts of water Solution Germination Rate is Dependent variable. Because its value depends on all other factors like seed type, vermiculite, water , and light..

A laboratory technician mixes 1 mL of a stock culture with 99 mL of .pdf

trishacolsyn25353

A laboratory technician mixes 1 mL of a stock culture with 99 mL of water. She then performs five 1/10 serial dilutions with 1 mL of the diluted stock culture. Before she goes home for the evening, she plates 0.1 mL of the final serial dilution and spreads the sample on a TSA plate containing 50 mL of solid agar. If she arrives to work the next day to find 295 colonies on the plate, what is the concentration of bacteria in the stock culture? Solution The technician had made dilution of 107 . she have taken the last dilution of 0.1ml from where she gets 295 colonies, so in that dilution 1ml would have 295*10=2950 bacterial cell. Therefore the concentration of bacteria in the stock culture is 2950 *107=2.95 * 1010 babterial cell/ml..

5) look up the following health-based peer-reviewed journal article .pdf

trishacolsyn25353

5) look up the following health-based peer-reviewed journal article that displays a frequency distribution or histogram in the results section González-Villalpando, C., Dávila-Cervantes, C. A., Zamora-Macorra, M., Trejo-Valdivia, B., & González-Villalpando, M. E. (2014). Risk factors associated to diabetes in Mexican population and phenotype of the individuals who will convert to diabetes. salud pública de méxico, 56(4), 317-322. a) Describe the characteristics of the grouped data in this journal article. b) What additional ways can the group data may be displayed for publication? What is the rationale for selecting these alternative methods? Method of Display Rationale Method of Display Rationale Solution The given quation deals with the study of the research paper results. a. The grouped data shown in the result of the paper is, the number of people, male and female in the converter and non-converter heads on various variables, such as mother,father,brother,their weight and many other variables.The studied variables are all quantitative variables. b. The grouped data can be displayed using, i. pie chart representation, since in this type of represenatation one can at a glance get an overall idea about the reatio or percentage of the people under each head. ii. frequency polygon, since it would also give a crude idea about the relationship between the variable under study and the frequency of the variable under each head. iii. ogive representation, since it would additionally give a trend of the variables under study, and help to estimate or predict the variable value at any point under study. iv. boxplot representation, since it would give an idea about the median of the variables under study and also give an idea about the presence of any possible outliers and also the quartiles. and many more such echniques can be applied depending on the requirement of the research needs..

class Array { public static int getTotal(int[][]numbers ) { .pdf

trishacolsyn25353

class Array { public static int getTotal(int[][]numbers ) { int tot=0; // Lo0op repeats until list ends for (int row = 0;row < numbers .legth; row++) for (int col=0 ;col< numbers [row].length; col++) tot+=numbers [row][col]; return tot; } // return avarage public static double getAvarage(int [][]numbers,int index) { double avg; avg=(double) (getTotal(numbers/(12)); return avg; } public static int getRowTotal (int [][] numbers, int index) { int tot=0; // loop repeats until list ends for (int col=0;col<4;col++) // Accumulates sum of numbers tot+= number[index][col]; return tot; } public static int getHighest(int [][] numbers, int row) { int high= numbers [row][0]; // Loop repeats until list ends for (int i = 1; i<4; i++) if (numbers[rows][i]>high ) high = numbers [row] [i]; return high; } public static int getLowest (int [][]number,int row) { int low = number [row][0]; // Loop repeats until list ends for(inti = 1 ;i < 4 ;i++) if (numbers [row][i] Solution class ArrayDemo { // main function public static void main(String[] arg) { int[][] list = { { 1, 2, 3, 4 }, { 5, 6, 7, 8 }, { 9, 10, 11, 12 } }; // Function call and display data returned System.out.println(\"total:\" + getTotal(list)); System.out.println(\"Average:\" + getAverage(list)); System.out.println(\"Row 2 value:\" + getRowTotal(list, 2)); System.out.println(\"column3 value:\" + getColumnTotal(list, 3)); System.out.println(\"highest value in row 1 is:\" + getHighest(list, 1)); System.out.println(\"lowest value in row 2 is:\" + getLowest(list, 2)); // exit program System.exit(0); } public static int getTotal(int[][] numbers) { int tot = 0; // Lo0op repeats until list ends for (int row = 0; row < numbers.length; row++) for (int col = 0; col < numbers[row].length; col++) tot += numbers[row][col]; return tot; } // return average public static double getAverage(int [][]numbers) { double avg; avg=(double) getTotal(numbers)/12; return avg; } public static int getRowTotal(int[][] numbers, int index) { int tot = 0; // loop repeats until list ends for (int col = 0; col < 4; col++) // Accumulates sum of numbers tot += numbers[index][col]; return tot; } public static int getHighest(int[][] numbers, int row) { int high = numbers[row][0]; // Loop repeats until list ends for (int i = 1; i < 4; i++) if (numbers[row][i] > high) high = numbers[row][i]; return high; } public static int getLowest(int[][] numbers, int row) { int low = numbers[row][0]; // Loop repeats until list ends for (int i = 1; i < 4; i++) if (numbers[row][i] < low) low = numbers[row][i]; return low; } public static int getColumnTotal(int[][] numbers, int column) { int sum = 0; for(int i = 0; i < numbers.length; i++) sum += numbers[i][column]; return sum; } }.

Write sinusoidal mathematical equations in MATLAB to play your favor.pdf

trishacolsyn25353

Write 300-400 words review of the paper using your own words and n.pdf

trishacolsyn25353

Write 300-400 words review of the paper \"using your own words and not copying anything form the article\". Karin Slegers CUO | Social Spaces KU Leuven - iMinds Parkstraat 45, bus 3605 3000 Leuven, Belgium karin.slegers@soc.kuleuven.be Pieter Duysburgh SMIT, VUB - iMinds Pleinlaan 9 1050 Brussels, Belgium pieter.duysburgh@vub.ac.be Abstract Niels Hendriks Social Spaces | CUO LUCA - KU Leuven C-Mine 5 3600 Genk, Belgium niels.hendriks@luca-arts.be Author Keywords Participatory design; Ethics; Cognitive impairments; Sensory impairments; ACM Classification Keywords H.5.m. Information interfaces and presentation (e.g., HCI): Miscellaneous. Introduction It has been acknowledged that doing participatory design with people living with cognitive or sensory impairments can be quite difficult. As the experiences of persons living with impairments, such as autism spectrum disorder, Alzheimer’s disease or hearing impairments, might be fundamentally different from their own, it is more difficult for researchers and designers to identify with or relate to their users [8,11]. An additional complicating issue is the fact that many participatory design methods fail in their inclusiveness with regard to people living with impairments [13]. In participatory design, researchers should provide their participants with appropriate tools for expressing themselves [14]. However, common participatory design tools may not be appropriate when working with people living with impairments. Such tools frequently draw upon exactly those skills that people living with cognitive or sensory impairments have problems with. Ethical Issues in Participatory Design with People living with Cognitive or Sensory Impairments Participatory design with people living with cognitive or sensory impairments poses several challenges on researchers and designers, due to differences in their mutual experiences and due to the fact that many methods and techniques may not be appropriate and need adjustment. Many of those challenges are related to ethical issues. This paper describes several of such challenges that emerged during a series of three academic workshops focusing on adjusting participatory design approaches when working with people living with cognitive or sensory impairments. We plead for a new tradition of sharing experiences in order for researchers and designers to learn from one another in the form of codesign stories. Many methods are, for instance, based on verbal or visual expressions, and use visual and/or hands-on techniques. Also, higher order cognitive skills are often required [2,14], such as abstraction, conceptualization or creative thinking. As a result, common participatory design techniques, and research approaches in general, may not be usable, or at least need adjustment. This idea that the involvement of people living with impairments in the design process requires a different, more appropriate approach, matches recent views on disability. Traditionally, the medical.

will left-wing terror increase, remain the same, or decrease in the .pdf

trishacolsyn25353

will left-wing terror increase, remain the same, or decrease in the next 5 years? Explain the basis for your opinion. Solution Terrorism is the premeditated use or threat to use violence by individuals or sub national groups to obtain a political or social objective through the intimidation of a large audience beyond that of the immediate victims. Left wing extremism often has developed from working -class movements seeking in theory to eliminate, not preserve, class distinctions. Communism evolved from left wing extremism. The threat from left wing extremists did not die with the collapse of the Soviet Union, however. Domestic groups and state -sponsored cells and individuals have continued their espionage activities and the planning of terrorist actions against the U.S. government. Many believe that leftist extremism in the United States was at its peak during the 1960s and 1970s and that right wing extremism then became the major threat. Leftist extremists were responsible for three -fourths of the officially designated acts of terrorism in America in the 1980s. Leftist extremists also pose an espionage threat to U.S. interest. The threat to the United States government from leftist extremists has decreased considerably in the past decade, but it has not disappeared. There are individuals and organizations within the United States who maintain the same ideology that resulted in the growth of left wing terrorism in this country in the 1970s and 1980s. On the basis on my opinion, Left wing extremism continues, indeed, to be a potential threat to U.S. government agencies. The challenge in responding to this threat is to ensure that the rights of individuals to form and express their own beliefs are balanced with the need to provide security and protection against terrorism and espionage that may be committed by the most extreme members of these movements. Leftist extremism presents two threats. We thing that first threat is terrorism. Left wing terrorists have been responsible for bombings, assassinations, robberies, and planned attacks on infrastructure targets. The second threat is their potential support of espionage conducted against the United States by supporting countries such as Cuba. Although the United States has not experienced any major leftist terrorist movements or actions in recent years, these groups continue to be active in other parts of world. Of the 40 terrorist groups listed in the U.S. Department of State\'s 1998 report, 16 were Islamic or Palestinian extremist groups and 16 were Marxist Leninist organizations. But today there is no equivalent threat from left-wing extremists. Small bands of masked protestors periodically indulge in a bout of window smashing or throw rocks at the police, but bombings, bank robberies and gunfights with law enforcement are the province of fringe right-wing extremist groups..

Which Boolean algebra theorem describes the situation where any varia.pdf

trishacolsyn25353

What is the time difference in myelinated vs. unmyelinated axons.pdf

trishacolsyn25353

What is the time difference in myelinated vs. unmyelinated axons? Solution The gap junctions found at regular intervals in the myelin sheath are called as Nodes of Ranveir. Myelin sheath does not allow the exchange of ions through it and exchange of ions occurs at Nodes of Ranveir only. Myelin sheath helps in the faster conduction of impulses through the axons by saltatory conduction (impulses jump from one node to another). Thus, the impulses are conducted faster in myelinated neurons (glial cells insulate the neurons with myelin sheath) than non-myelinated neurons. In non myelinated neurons, the ions move through the axon length, so the conduction is slower..

whats is the hostory of mathematicsSolutionIt deals with the .pdf

trishacolsyn25353

whats is the hostory of mathematics? Solution It deals with the investigation into the origin of discoveries in mathematics and an investigation into the mathematical methods and notation of the past. Primarily, there were two main civilizations associated with the development of mathematics, they were (i) Babylonians (ii) Indus valley Ancient mathematics has reached the modern world largely through the work of Greeks in the classical period, building on the Babylonian tradition. A leading figure among the early Greek mathematicians is Pythagoras who deveoped the famous pythagorus theorem. Indian mathematics emerged in the indian subcontinent until the end of eightienth century.A later landmark in Indian mathematics was the development of the series expansions for trigonometric functions (sine, cosine, andarc tangent) by mathematicians of the Kerala school in the 15th century CE. Their remarkable work, completed two centuries before the invention of calculus in Europe, provided what is now considered the first example of a power series (apart from geometric series). From ancient times through the Middle Ages, bursts of mathematical creativity were often followed by centuries of stagnation. Beginning in Renaissance Italy in the 16th century, new mathematical developments, interacting with new scientific discoveries, were made at an increasing pace that continues through the present day..

what is spiled identity as in disabilityAre all aspects of spoile.pdf

trishacolsyn25353

what is spiled identity as in disability? Are all aspects of spoiled identity are inevitable? Solution Within a society, certain people are normal and few of them are so different from others. The abnormal identity of an individual from others might be due to the social situations, the race, the gender and physical deformities. This leads to a social stigma on the person who is abnormal. The person who is experiencing stigma has been said to be having a spoiled identity..

Wendy and Peter want to buy property together. Wendy will be contri.pdf

trishacolsyn25353

Wendy and Peter want to buy property together. Wendy will be contributing $70,000.00 of the $100,000.00 purchase price, while Peter will be contributing $30,000.00. Wendy has two brothers, John and Michael, whom she loves very much and she really wants them to inherit her share of the property after her death. Tenants in Common can own unequal percentages of the property, allowing the co-owners to take into account varying levels of contribution. Upon the death of a tenant in common, the share owned by the decedent passes through his or her estate to the beneficiaries determined by will, if applicable, or by intestate succession (without a will). Joint Tenants must own equal percentages, regardless of contribution. Upon the death of a joint tenant, the share owned by the decedent goes to the surviving joint tenant. Assume that Wendy and Peter assume ownership in the property as tenants in common. What would happen to Wendy’s share in the property if Wendy died before Peter? Peter would acquire her ownership interest, taking sole title to the entire property. Wendy’s share would go to her estate, to be distributed via her will or via intestate succession. Wendy’s share would go directly to John and Michael, because your siblings always get your property upon death. Wendy’s share would go to her parents. Assume that Wendy and Peter assume ownership in the property as joint tenants. What would happen to Wendy’s share in the property if Wendy died before Peter? Peter would acquire her ownership interest, taking sole title to the entire property. Wendy’s share would go to her estate, to be distributed via her will or via intestate succession. Wendy\'s share would go directly to John and Michael, because your siblings also get your property upon death. d. Wendy\'s share would go to her parents. Assume that Wendy and Peter assume ownership in the property as tenants in common. What is the percentage of ownership interest that each is most likely to have in the property? Wendy would own 70% and Peter would own 30%. Wendy would own 30% and Peter would own 70%. Wendy would own 100%. Wendy would own 50% and Peter would own 50%.a. Peter would acquire her ownership interest, taking sole title to the entire property.b. Wendy’s share would go to her estate, to be distributed via her will or via intestate succession.c. Wendy’s share would go directly to John and Michael, because your siblings always get your property upon death.d. Wendy’s share would go to her parents. Solution Assume that Wendy and Peter assume ownership in the property as tenants in common. What would happen to Wendy’s share in the property if Wendy died before Peter? Wendy’s share would go to her estate, to be distributed via her will or via intestate succession. Assume that Wendy and Peter assume ownership in the property as tenants in common. What is the percentage of ownership interest that each is most likely to have in the property? Wendy would own 70% and Peter would own 30%.b. Wend.

Una carga puntual de 3 C, esta contenida en una superficie cerrada de.pdf

trishacolsyn25353

Una carga puntual de 3 C, esta contenida en una superficie cerrada de radio r = Determine el flujo electrico neto que abandona la superficie cerrada de radio r= 2. Solution Implementation of SAP SCM Modules for DP, SNP, EIS Regions, US, Canada, Mexico, Chile, Peru, Columbia and Venezuela. Provide technical solution leadership to the Program Director, Project Managers and GSLT Manage IS and vendor stakeholder relationships relevant to the technical solution Ensure technical project and product meet governance, security and CARM guidelines Ensure product is accepted into the support organization Provide status and support to Project Managers in the above activities.

Thomas Insel (TedX Talk) suggests that the terms behavioral disorder.pdf

trishacolsyn25353

Thomas Insel (TedX Talk) suggests that the terms behavioral disorder and mental disorder are outdated given what we now know about mental illness. What does he suggest instead and why? Solution Few short decades ago, the mind and body were considering separate independent entities, but recently discovered that the psychological factors induce all kinds of illness, not only mental once. They include bronchial asthma and essential hypertension etc. Some major illness such as deppression and schizophrenia have biological components.hence they are called as mental illness not mental disorders. Mental health is not exclusively a matter of relation between persons, it also matter of relation of the individual towards the community he lives. Mental health is influenced by both biological and social factors. It is not a static condition but subject to variations and fluctuations..

The knowledge of how the Internal Revenue Code treats business activ.pdf

trishacolsyn25353

The knowledge of how the Internal Revenue Code treats business activities and how the different organizational forms are recognized as reporting entities are basic elements of taxation. a.)What organizational forms are required to comply with filing and reporting to the IRS, and how they are different? b.)How do GAAP and tax accounting differ? URGENT: NEED ANSWER ASAP PLEASE RESPOND WITH COPY AND PASTE, NOT ATTACHMENT USE ORIGINAL CONTENT NOT USED BEFORE ON CHEGG PLEASE ANSWER THROUGHLY TO ALL ANSWER TO BEST ABILITES ORIGINAL SOURCE NEVER USED BEFORE!!! Solution a.) Most charitable nonprofits that are recognized as tax-exempt have an obligation to file an annual information return with the IRS. (There are very few exceptions: church-affiliated organizations and governmental organizations are among those not required to file.) The IRS Form 990 is a public document, so make sure that your nonprofit\'s board reviews it before it\'s filed, and that it is completed thoughtfully as well as accurately. If a nonprofit is incorporated in a state but has never been recognized by the IRS as “tax-exempt,” then it does not have an obligation to file an annual information return with the IRS. Note: Conversely, even if your organization fits one of the few exceptions to mandatory annual filing with the IRS, it may still have to file forms annually in the state where it is incorporated, or where it engages in fundraising activities. See information on required state filings. Most small tax-exempt organizations with gross receipts that are normally $50,000 or less must file the IRS form 990-N, known as the \"e-postcard\". Exceptions to this filing requirement include: · Organizations that are included in a group return, · Churches, their integrated auxiliaries, and conventions or associations of churches, and · Organizations required to file a different return b.)Difference in GAAP and Tax Accounting is stated below: Particulars GAAP Tax Accounting Purpose The purpose of GAAP is to provide a standard set of guidelines and accounting principles in order to bring uniformity and relevance as it increases the reliability and comparability of financial statements. The tax accounting framework is developed and maintained by the Internal Revenue Service or IRS, and the purpose of this framework is to impose tax against taxable income or net earnings of the business. Taxable income is not the same as revenue (as defined by GAAP). The tax is deducted and collected in the earlier of receipt of cash, or earning. Basis of Accounting In the GAAP accounting, accrual based accounting is the only acceptable method. The cost of developing, implementing and using the GAAP accounting system is sometimes too much for small scale businesses; therefore, the IRS allows such businesses to record their financial transactions using alternative methods. In the Tax accounting uses accrual, cash and modified basis of accounting. Depreciation Recognition Under the GAAP accounting, differe.

The additional production yielded by the use of one extra unit of va.pdf

trishacolsyn25353

Respond to the following by writing at least one paragraph for each .pdf

trishacolsyn25353

Respond to the following by writing at least one paragraph for each item and support your response. 1) Select two of the administrative/utility software programs. These include those utilized for route tracing, file transfer, searching/indexing, data analysis, link-checking, and remote server administration. Identify an example of each and research information on each manufacturer’s Web site. Describe how this type of software works and how it would benefit an e-commerce operation. Provide a link to ALL Web sites used for this part of the assessment. Solution 1)Virtual Network Computing i.e. most commonly called as VNC in the today\'s business or corporate world. It comes under the category of administrive software programs which enables smoother , easier and user friendly \"Remote Server Administration\". How it works : It works on two tier architechture commonly known as Client-Server Model which internally leverages one of the Protocol(i.e. Set of rules for particular process) named as - RFB (Remote Frame Buffer) Protocol. In Two Tier Model : Benefits to E-commerce : Manufacturer Details : It was originally developed by Olivetti and Oracle Research Lab in UK which was by later on owned by AT &T with its original founders. Nowadays, it has been converted into a company named as \"RealVNC\" with official website as www.realvnc.com with registered trademark as VNC in US and other countries. 2)WinSCP : It is a File Transfer utility programs which is also known as Windows Secure Copy. It is an free open source software SFTP, FTP, WebDAV and SCP client for Windows. It mainly enables the user to transfer the data securely from Windows to remotely accessed server machine drive locations. It also offers the feature of File Manager and File synchronization. How it works : It uses secure way to transfer it via SSH Protocol (Secure Shell) and supports SCP Protocol in addition to SFTP. It authenticates the transfer via usage of SSL/TLS client certificates. It maintains the queue of the files to be transferred using various n/w protocols which can be resumed and scheduled by maintaining traces over file on the network. How it benefits e-commerce platform : Manufacturer Information : It is an open source software, which is managed by an Forum or an community. It was started by a man and also known as \"one-man project\" with name Martin Prikryl. It is now having contribution of various open source developers available across the world. It official website is www.winscp.net.

Practice Problems -Due next class period Fully describe how nitrogen .pdf

trishacolsyn25353

Practice Problems -Due next class period Fully describe how nitrogen (ammonia an dissolved oxygen problems in surface waters? Describe the processes of lake stratifica diagram or drawing that you have generated yourself. Identify a Nitrogen, Phosphorus, or Nutrient impaired water using the EPATMDL database and discuss the following items d nitrate) and phosphorus pollutants lead to tion and turnover in your own words, using at least 1 Provide a map of the watershed or find a photo specific to the watershed that shows o eutrophication. o What specific pollutant(s) drive eutrophication within the watershed? what point source and non-point source polluters contribute to the problem? o How much Nitrogen and/or Phosphorus is allowed on a water shed basis for the point source and non-point source polluters? As an avid outdoorsperson, explain whether you would swim or fish in this water? o Environmental Engineering Class 14 Limnology Solution Answer 1: Poor water quality in lakes can have many unpleasant consequences. Rough fish – such as carp and bullhead – populations increase at the expense of game fish populations. Severe nuisance algal blooms yield unpleasant odor and appearance that reduce the aesthetic appeal of lakes. This may result in declines in fishing and swimming and hurt tourism. As algae die and decompose, the process consumes oxygen. Submerged plants without sunlight die, decompose and consume more oxygen. Without enough dissolved oxygen in the water, fish and other organisms suffer and die because they can\'t “breathe.” This can occur locally or much farther downstream leading to degraded estuaries, lakes and reservoirs Answer 2: Lake is stratified on the basis of temperature difference along the lake depth. Also called as lake thermal stratification. Cold water is denser than warm water and the epilimnion generally consists of water that is not as dense as the water in the hypolimnion. There are 3 layers Lake turnover is the process of a lake\'s water turning over from top (epilimnion) to bottom (hypolimnion). During the summer, the epilimnion, or surface layer, is the warmest..

Name three approaches of how single mode laser can be obtained. Expl.pdf

trishacolsyn25353

Name three approaches of how single mode laser can be obtained. Explain each approach. Solution Single-mode Operation: operation of a laser on axial (longitudinal) resonator modes only, or even on a single axial mode. The term single-mode operation, which usually applies to lasers, is ambiguous, as it is used with different meanings: The number and type of oscillating resonator modes in a laser depends on the circumstances:.

List four principle events that occur in the ER with regard to prote.pdf

trishacolsyn25353

List four principle events that occur in the ER with regard to protein production and/or modifications? Solution The endoplasmic reticulum (ER) forms a network of tubules that are enclosed by membrane and sacs (cisternae) extending from the nuclear membrane throughout the cytoplasm. ER plays a critical role in protein processing and sorting. Some of the critical events that occur in ER are listed below; 1. ER acts as a port of entry of the protein secretory pathway. Proteins destined for the entry to cell wall or vacuole or for the other compartments of the cell, first enters into the ER and are then transported to the Golgi complex, from where they en route to final destination organelles. ER thus represents a major organelle involved for the traffic of proteins within eukaryotic cells. 2.Newly sunthesized polypeptides undergoes functional folding in ER. It is the organelle where many multimeric proteins assemble. Proteins are retained in ER until they acquire their correct final conformations. 3. It is in ER where the glycoproteins acquire their asparagine-linked glycans.Also, in some plant cells, ER is the site for aggregation and accumulation of some storage proteins. 4. Rough ER (RER) is the site for manufacture of secreted proteins,which are either secreted constitutively without any tag or secreted in a regulatory manner involving clathrin and paired basic amino acids in the signal peptide..

Lapbook sobre os Regimes Totalitários.pdf

Jean Carlos Nunes Paixão

Operation Blue Star - Saka Neela Tara

Balvir Singh

Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup. The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.

Recently uploaded

Lapbook sobre os Regimes Totalitários.pdf

Jean Carlos Nunes Paixão

Operation Blue Star - Saka Neela Tara

Balvir Singh

Supporting (UKRI) OA monographs at Salford.pptx

Jisc

The Accursed House by Émile Gaboriau.pptx

DhatriParmar

Additional Benefits for Employee Website.pdf

joachimlavalley1

The Roman Empire A Historical Colossus.pdf

kaushalkr1407

The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence. The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth. Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration. The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority. Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages. Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.

"Protectable subject matters, Protection in biotechnology, Protection of othe...

SACHIN R KONDAGURI

1.4 modern child centered education - mahatma gandhi-2.pptx

JosvitaDsouza2

BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...

Nguyen Thanh Tu Collection

Acetabularia Information For Class 9 .docx

vaibhavrinwa19

Synthetic Fiber Construction in lab .pptx

Pavel ( NSTU)

Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.

The approach at University of Liverpool.pptx

Jisc

Chapter 3 - Islamic Banking Products and Services.pptx

Mohd Adib Abd Muin, Senior Lecturer at Universiti Utara Malaysia

TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...

EugeneSaldivar

CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE

BhavyaRajput3

Francesca Gottschalk - How can education support child empowerment.pptx

EduSkills OECD

Embracing GenAI - A Strategic Imperative

Peter Windle

Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction. This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.

Introduction to AI for Nonprofits with Tapp Network

TechSoup

Thesis Statement for students diagnonsed withADHD.ppt

EverAndrsGuerraGuerr

2024.06.01 Introducing a competency framework for languag learning materials ...

Sandy Millin

http://sandymillin.wordpress.com/iateflwebinar2024 Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error. Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials. This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.

Recently uploaded (20)

Lapbook sobre os Regimes Totalitários.pdf

Operation Blue Star - Saka Neela Tara

Supporting (UKRI) OA monographs at Salford.pptx

The Accursed House by Émile Gaboriau.pptx

Additional Benefits for Employee Website.pdf

The Roman Empire A Historical Colossus.pdf

"Protectable subject matters, Protection in biotechnology, Protection of othe...

1.4 modern child centered education - mahatma gandhi-2.pptx

BÀI TẬP BỔ TRỢ TIẾNG ANH GLOBAL SUCCESS LỚP 3 - CẢ NĂM (CÓ FILE NGHE VÀ ĐÁP Á...

Acetabularia Information For Class 9 .docx

Synthetic Fiber Construction in lab .pptx

The approach at University of Liverpool.pptx

Chapter 3 - Islamic Banking Products and Services.pptx

TESDA TM1 REVIEWER FOR NATIONAL ASSESSMENT WRITTEN AND ORAL QUESTIONS WITH A...

CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE

Francesca Gottschalk - How can education support child empowerment.pptx

Embracing GenAI - A Strategic Imperative

Introduction to AI for Nonprofits with Tapp Network

Thesis Statement for students diagnonsed withADHD.ppt

2024.06.01 Introducing a competency framework for languag learning materials ...