The document is a service manual that provides instructions for servicing a transmission. It begins with general information about the transmission components and operation. It then provides a section-by-section process to disassemble the transmission down to its core components in over 20 steps, including removing gears, shafts, bearings, seals, and other parts. Precautions are given to clean parts thoroughly to prevent dirt intrusion during repair.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Fiat kobelco sl30 b skid steer loader service repair manualfjskksmem
This document provides standard torque specifications for various types of hardware including:
- Decimal and metric bolts, nuts, and studs of different grades
- Steel hydraulic fittings including 37 degree flare fittings, straight threads with O-rings, split flange mounting bolts, O-ring face seal ends, and O-ring boss ends
- Pipe fittings and lock nuts
Torque values are specified based on the size and grade of the hardware. The document is intended to provide torque values when special specifications are not given for maintenance and repair.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualfjskksmem
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components of the excavator and their names. It provides the necessary technical details and requirements for maintenance, repairs, and inspections of the machine.
Komatsu wa250 5 l wheel loader service repair manual sna73001 and upujfjjdkkkkmm
This document provides instructions for removing and installing a fuel injection pump assembly and nozzle holder assembly on a Komatsu WA250-5L/WA250PT-5L wheel loader. Key steps include disconnecting fuel lines and tubes, removing mounting nuts and brackets, using special tools as needed, and bleeding air from the fuel system after installation. Precautions are given such as matching timing marks and following specified tightening torques.
Komatsu wa200 pt 5l wheel loader service repair manual sna89001 and upufjjjsekkkem
This document provides instructions for removing and installing the fuel injection pump assembly on a Komatsu WA200-5L or WA200PT-5L wheel loader. The removal process involves disconnecting fuel lines and tubes, removing mounting hardware, and using a timing pin to align the injection pump gear. Installation is the reverse of removal, taking care to properly tighten all fasteners and adjust the fuel control cable and engine stop solenoid. Precautions like disconnecting the battery and lowering work equipment are noted.
Electrolux hu 9027 st snow thrower service repair manualufjkskemfseol
This document provides instructions for technicians servicing snowthrowers. It includes sections from the owner's manual to help technicians understand consumer instructions. The manual covers repairs for a model with many optional features. Section 7 will cover repair procedures and include exploded parts diagrams to aid in repairs, though part numbers may vary by model. When working on equipment, technicians should follow safe practices like wearing protective equipment and disconnecting the spark plug.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fjjsieskekfmmse
This document provides guidelines for maintaining various components of a machine. It recommends specific lubricants for different parts, including engine oil, transmission fluid, hydraulic fluid, and grease. It lists lubricant change intervals and specifications for coolant mixtures. Safety symbols are defined that will be used in repair manuals. Abbreviations used in manuals are also outlined. Maintaining the proper lubricants and coolant mixtures per these guidelines is important for machine performance and service life.
John deere chainsaws cs52 service repair manualufjkskemfseol
This technical manual provides information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The first section provides the manual's table of contents and outlines that it contains specifications, identification numbers, tools/materials, schematics, theory of operation, diagnosis/testing, and repair information. The manual is intended for experienced technicians and contains model-specific sections.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Fiat kobelco sl30 b skid steer loader service repair manualfjskksmem
This document provides standard torque specifications for various types of hardware including:
- Decimal and metric bolts, nuts, and studs of different grades
- Steel hydraulic fittings including 37 degree flare fittings, straight threads with O-rings, split flange mounting bolts, O-ring face seal ends, and O-ring boss ends
- Pipe fittings and lock nuts
Torque values are specified based on the size and grade of the hardware. The document is intended to provide torque values when special specifications are not given for maintenance and repair.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualfjskksmem
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components of the excavator and their names. It provides the necessary technical details and requirements for maintenance, repairs, and inspections of the machine.
Komatsu wa250 5 l wheel loader service repair manual sna73001 and upujfjjdkkkkmm
This document provides instructions for removing and installing a fuel injection pump assembly and nozzle holder assembly on a Komatsu WA250-5L/WA250PT-5L wheel loader. Key steps include disconnecting fuel lines and tubes, removing mounting nuts and brackets, using special tools as needed, and bleeding air from the fuel system after installation. Precautions are given such as matching timing marks and following specified tightening torques.
Komatsu wa200 pt 5l wheel loader service repair manual sna89001 and upufjjjsekkkem
This document provides instructions for removing and installing the fuel injection pump assembly on a Komatsu WA200-5L or WA200PT-5L wheel loader. The removal process involves disconnecting fuel lines and tubes, removing mounting hardware, and using a timing pin to align the injection pump gear. Installation is the reverse of removal, taking care to properly tighten all fasteners and adjust the fuel control cable and engine stop solenoid. Precautions like disconnecting the battery and lowering work equipment are noted.
Electrolux hu 9027 st snow thrower service repair manualufjkskemfseol
This document provides instructions for technicians servicing snowthrowers. It includes sections from the owner's manual to help technicians understand consumer instructions. The manual covers repairs for a model with many optional features. Section 7 will cover repair procedures and include exploded parts diagrams to aid in repairs, though part numbers may vary by model. When working on equipment, technicians should follow safe practices like wearing protective equipment and disconnecting the spark plug.
Kawasaki 135 zv wheel loader service repair manual (serial no. 13c 10201 and up)fjjsieskekfmmse
This document provides guidelines for maintaining various components of a machine. It recommends specific lubricants for different parts, including engine oil, transmission fluid, hydraulic fluid, and grease. It lists lubricant change intervals and specifications for coolant mixtures. Safety symbols are defined that will be used in repair manuals. Abbreviations used in manuals are also outlined. Maintaining the proper lubricants and coolant mixtures per these guidelines is important for machine performance and service life.
John deere chainsaws cs52 service repair manualufjkskemfseol
This technical manual provides information for John Deere chainsaws models CS36, CS40, CS46, CS52, CS56, CS62, CS71, and CS81. The first section provides the manual's table of contents and outlines that it contains specifications, identification numbers, tools/materials, schematics, theory of operation, diagnosis/testing, and repair information. The manual is intended for experienced technicians and contains model-specific sections.
Fiat kobelco sl30 b skid steer loader service repair manualidkkmdmd
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- Most accidents can be prevented by following simple safety rules and recognizing potential hazards before they cause accidents.
- Never attempt to clean, oil, or adjust the machine while it is in motion. Be certain any hydraulic, mechanical, or cable equipment is lowered to the ground before servicing.
- Wear appropriate protective equipment like safety hats, boots, gloves, and hearing protection when operating or servicing the loader.
- Only allow trained operators to use the loader. Do not let anyone ride as a passenger.
Fiat kobelco ex95 w mini wheel excavator service repair manualidkkmdmd
This document provides safety precautions for operating an excavator. It outlines general safety rules such as reading the operator's manual, understanding safety signs, wearing proper protective equipment, keeping the operator compartment clear, and following rules for starting, operating, stopping and maintaining the machine. It emphasizes avoiding hazards from moving parts by keeping body parts inside the operator compartment. It also notes checking for overhead and underground utilities and following limitations for the work site.
Fiat kobelco e80 mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and general guidelines for disassembling and repairing machines:
- Proper preparation is important, including cleaning the machine, recording inspection details, and arranging the work area. Safety gear should be worn and the machine secured before starting work.
- Hydraulic systems require special care when disassembling. Pressure must be released from lines and parts cleaned before removal. Match marks should be made and original assembly procedures followed.
- Inspection and cleaning of individual parts is important. Clearances and wear must be measured and documented. Reassembly follows the reverse of disassembly procedures, with new seals, grease, and sealants applied as needed. Thorough checks are required before
Fiat kobelco e50.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights.
Fiat kobelco e45.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and general guidelines for repairing construction machinery. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental measures. Specific safety topics covered include cleaning machines before work, using proper protective equipment, relieving pressures in systems, and properly supporting lifted or raised components. Guidelines are provided for disassembling and assembling hydraulic systems and components.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and guidelines for repairing and maintaining excavators. It covers preparing for disassembly, safety procedures for hydraulic and electrical systems, inspection and replacement of parts, reassembly, and installation. Proper preparation, cleaning, documentation, use of safety equipment, and bleeding of hydraulic systems are emphasized.
Fiat kobelco e35.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers for identification.
2. Dimensions and performance specifications for the excavator, including machine weight, transport information, and bucket/shoe types.
3. Engine specifications, including performance curves for the model.
4. Sections on maintenance, systems, troubleshooting, and additional support data for the excavator. The document appears to be a workshop manual providing technical information to aid in repairs and maintenance of the machine.
Fiat kobelco e30.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and guidelines for disassembling and repairing hydraulic excavators. It covers preparing for repairs, safety measures when disassembling parts, handling hydraulic and electrical components, and reassembling equipment. The document instructs technicians to clean machines before work, record inspection details, use proper safety gear, and bleed air from hydraulic systems after reassembly. Technicians are advised to take precautions for their safety and to properly handle and reinstall components.
Fiat kobelco e22 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly read manuals, clean machines, identify necessary parts, and document inspections before disassembling.
- Proper protective equipment like gloves, shoes, and glasses should be worn. Warning signs should be posted and engines stopped before work.
- Hydraulic and electrical systems need to be depressurized and disconnected from power sources. Guards and shields must be reinstalled after repairs.
- Welding, if required, should only be done by trained personnel. Fuel and hydraulic lines must be carefully inspected for damage.
- Procedures describe escaping from enclosed cabs and towing machines if necessary. Conversions between
Clark tmx12 25 forklift service repair manualidkkmdmd
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages and outlining safe maintenance practices such as blocking the wheels before working under the truck.
2. Procedures for lifting parts of the truck, including raising the drive wheels, chaining the upright, and jacking the rear or entire truck.
3. Instructions for securely tying down the truck for shipping.
Clark sf15 20 slc forklift service repair manualidkkmdmd
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides technical information for repair and maintenance of various models of forklifts, including safety precautions, general repair procedures, and standards conversions. It is divided into sections covering each main system, with chapters addressing topics like the engine, electrical system, and safety protocols. Technicians are directed to use proper tools and follow safety guidelines to prevent injury when working on forklifts.
Clark sf12 20 sdlg forklift service repair manualidkkmdmd
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides technical information for repair and maintenance of various models of forklifts, including safety precautions, general repair procedures, and standards conversions. It is divided into sections covering each main system, with chapters addressing topics like the engine, electrical system, and safety protocols. Technicians are directed to use proper tools and follow safety guidelines to prevent injury when working on forklifts.
Fiat kobelco sl30 b skid steer loader service repair manualidkkmdmd
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- Most accidents can be prevented by following simple safety rules and recognizing potential hazards before they cause accidents.
- Never attempt to clean, oil, or adjust the machine while it is in motion. Be certain any hydraulic, mechanical, or cable equipment is lowered to the ground before servicing.
- Wear appropriate protective equipment like safety hats, boots, gloves, and hearing protection when operating or servicing the loader.
- Only allow trained operators to use the loader. Do not let anyone ride as a passenger.
Fiat kobelco ex95 w mini wheel excavator service repair manualidkkmdmd
This document provides safety precautions for operating an excavator. It outlines general safety rules such as reading the operator's manual, understanding safety signs, wearing proper protective equipment, keeping the operator compartment clear, and following rules for starting, operating, stopping and maintaining the machine. It emphasizes avoiding hazards from moving parts by keeping body parts inside the operator compartment. It also notes checking for overhead and underground utilities and following limitations for the work site.
Fiat kobelco e80 mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and general guidelines for disassembling and repairing machines:
- Proper preparation is important, including cleaning the machine, recording inspection details, and arranging the work area. Safety gear should be worn and the machine secured before starting work.
- Hydraulic systems require special care when disassembling. Pressure must be released from lines and parts cleaned before removal. Match marks should be made and original assembly procedures followed.
- Inspection and cleaning of individual parts is important. Clearances and wear must be measured and documented. Reassembly follows the reverse of disassembly procedures, with new seals, grease, and sealants applied as needed. Thorough checks are required before
Fiat kobelco e50.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides specifications and component information for an excavator model. It includes sections on machine dimensions, specifications and performance, machine and component weights, transportation requirements, crawler shoe and bucket types, and engine specifications including a performance curve. The document lists key components such as the engine, hydraulic pump, slewing motor, and travel motor. It also provides diagrams of machine dimensions and a table of weights.
Fiat kobelco e45.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and general guidelines for repairing construction machinery. It discusses preparing for disassembly, safety during disassembly and assembly, handling hydraulic and electrical equipment, welding repairs, and environmental measures. Specific safety topics covered include cleaning machines before work, using proper protective equipment, relieving pressures in systems, and properly supporting lifted or raised components. Guidelines are provided for disassembling and assembling hydraulic systems and components.
Fiat kobelco e40.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and guidelines for repairing and maintaining excavators. It covers preparing for disassembly, safety procedures for hydraulic and electrical systems, inspection and replacement of parts, reassembly, and installation. Proper preparation, cleaning, documentation, use of safety equipment, and bleeding of hydraulic systems are emphasized.
Fiat kobelco e35.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides specifications and component information for an excavator model E30.2SR - E35.2SR. It includes:
1. A list of major components with corresponding numbers for identification.
2. Dimensions and performance specifications for the excavator, including machine weight, transport information, and bucket/shoe types.
3. Engine specifications, including performance curves for the model.
4. Sections on maintenance, systems, troubleshooting, and additional support data for the excavator. The document appears to be a workshop manual providing technical information to aid in repairs and maintenance of the machine.
Fiat kobelco e30.2 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety precautions and guidelines for disassembling and repairing hydraulic excavators. It covers preparing for repairs, safety measures when disassembling parts, handling hydraulic and electrical components, and reassembling equipment. The document instructs technicians to clean machines before work, record inspection details, use proper safety gear, and bleed air from hydraulic systems after reassembly. Technicians are advised to take precautions for their safety and to properly handle and reinstall components.
Fiat kobelco e22 sr mini crawler excavator service repair manualidkkmdmd
This document provides safety guidelines and procedures for repairing heavy machinery:
- Technicians should thoroughly read manuals, clean machines, identify necessary parts, and document inspections before disassembling.
- Proper protective equipment like gloves, shoes, and glasses should be worn. Warning signs should be posted and engines stopped before work.
- Hydraulic and electrical systems need to be depressurized and disconnected from power sources. Guards and shields must be reinstalled after repairs.
- Welding, if required, should only be done by trained personnel. Fuel and hydraulic lines must be carefully inspected for damage.
- Procedures describe escaping from enclosed cabs and towing machines if necessary. Conversions between
Clark tmx12 25 forklift service repair manualidkkmdmd
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages and outlining safe maintenance practices such as blocking the wheels before working under the truck.
2. Procedures for lifting parts of the truck, including raising the drive wheels, chaining the upright, and jacking the rear or entire truck.
3. Instructions for securely tying down the truck for shipping.
Clark sf15 20 slc forklift service repair manualidkkmdmd
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides technical information for repair and maintenance of various models of forklifts, including safety precautions, general repair procedures, and standards conversions. It is divided into sections covering each main system, with chapters addressing topics like the engine, electrical system, and safety protocols. Technicians are directed to use proper tools and follow safety guidelines to prevent injury when working on forklifts.
Clark sf12 20 sdlg forklift service repair manualidkkmdmd
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides technical information for repair and maintenance of various models of forklifts, including safety precautions, general repair procedures, and standards conversions. It is divided into sections covering each main system, with chapters addressing topics like the engine, electrical system, and safety protocols. Technicians are directed to use proper tools and follow safety guidelines to prevent injury when working on forklifts.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at Multifamily Properties by Kevin Donnelly
Clark sf50 75s dl forklift service repair manual
1. SERVICE MANUAL
RATED CAPACITY : 5000~7500kg
SF50-75SD/L
CMP50-75sD/L
#40–1, Ungnam-Dong,
Changwon-City,Kyungnam,
Korea
Part No. 8034927
Manual No. SM690
Manufactured by
Jun,2004
Rev.2
2. 1
FOREWORD
G E N E R A L
00
02
FOREWORD
This shop manual has been prepared as an aid to improve quality of repairs by giving the
serviceman an accurate understanding of the product and by illustrating the correct way to
perform repairs and make judgements. Make sure you understand the contents of this manual
and use it to the full effect at every opportunity.
This shop manual mainly contains the technical information necessary for operations performed
in a service workshop.
For ease of understanding, the manual is divided into sections for each main system of the
machine, and the sections are further divided into groups.
HOW TO READ THIS MANUAL
CHAPTER AND SECTION
This manual is issued as a guide to carrying out repair and maintenance. To easily understand
this manual it is divided as follows :
Example) 10 – 01
Section number (01 : Structure and function)
Chapter number (10 : Engine)
• Improper operation and maintenance of this machine could result in serious injury or death.
• Read the Operation and Maintenance Manual carefully BEFORE operating the machine.
• Always keep the Operation and Maintenance Manual and Parts catalogue near the work
area.
• Obey precautions concerning flammable liquids, hazardous fluids, oils, lubricants and
cleaning solvents.
• To prevent injury to workers, this symbol is used to mark safety precautions in this
manual. The precautions accompanying this symbol should always be followed carefully.
• The specifications contained in this shop manual are subject to change at any time and
without any advance notice. Contact your SAMSUNG distributor for the latest information.
SAFETY
3. 2
FOREWORD
G E N E R A L
00
02
PAGE
Page numbering is started from each section. Therefore, revised pages can be easily inserted.
Also, additional pages and revision number can be indicated.
Ex) 15 – 1
3rd revision
Additional page from page 15
15th page of the section
For the revision status in this manual, refer to REVISION HISTORY.
SYMBOLS
The following symbols as defined below are used in this manual to convey the intent of the
instructions concerning safety and repair.
Symbol Item Remarks
Safety
Caution
Tightening
torque
Tool
Adhesive
Lubricating
Special safety precautions are necessary when
performing the work.
Special technical precautions or other precautions for
preserving standards are necessary when performing
the work.
Places that require special attention for the tightening
torque during assembly.
Places that require proper tools used in assembling
and disassembling.
Places to be applied with adhesive.
Places where oil or lubricant must be added.
4. 1
SAFETY
G E N E R A L
00
03
GENERAL PRECAUTIONS
SAFETY PRECAUTIONS
• When carrying out any operation or maintenance, have trained and experienced personnel carry
out the work.
• When carrying out any operation or maintenance, carefully read the Operation and Maintenance
Manual.
Read all the precautions given on the decals which are fixed to the machine.
SAFETY DEVICE
• Make sure that all guards and covers are mounted in their proper position. Repair or replace
if damaged.
• Pay attention to the method of using any safety locking device or safety belt.
SAFETY CLOTHES AND HELMET
• Wear the specified work clothes in the correct manner.
• Use the specified protective gear (helmet, safety glasses, safety shoes, mask, gloves).
Guard against injury from flying pieces of metal
or debris, wear goggles, gloves and helmet.
Always have a trained and experienced welder
carry out any welding work.
When carrying out welding work, always wear
welding gloves, apron, glasses, cap and other
clothes suitable for welding work.
5. 2
SAFETY
G E N E R A L
00
03
PREPARE FOR EMERGENCIES
• Know where fire extinguishers are located and
how to use them.
• Keep a first aid kit and an eye wash kit near
the work area.
• Keep emergency numbers for doctors, ambul-
ance service, hospital, and fire department near
your telephone.
HANDLE FLUIDS SAFELY–AVOID FIRES
• Handle fuel with care it is highly flammable.
• Do not refuel the machine while smoking or
when near open flame or sparks.
Always stop the engine before refueling
machine. Fill the fuel tank outdoors.
• Store flammable fluids away from fire hazards.
Do not incinerate or puncture pressurized
containers.
DISPOSE OF FLUIDS PROPERLY
• Improperly disposing of fluids can harm the
environment and ecology. Before draining any
fluids, find out the proper way to dispose of
waste from your local environmental agency.
• Catch draining fuel, oil, or other fluids in
suitable containers. Do not use food or
beverage containers that may mislead someone
into drinking from them. Wipe up spills at once.
• Do not pour oil into the ground, down a drain,
or into a stream, pond, or lake. Observe
relevant environmental protection regulations
when disposing of oil, fuel, coolant, brake fluid,
filters, batteries, and other harmful waste.
EX028
EX043
6. 3
SAFETY
G E N E R A L
00
03
AVOID HARMFUL ASBESTOS DUST
• Avoid breathing dust that may be generated
when handling components containing asbestos
fibers. Inhaled asbestos fibers may cause lung
cancer.
EX025
7. 4
SAFETY
G E N E R A L
00
03
PREPARATIONS FOR WORK
WARN OTHERS OF SERVICE WORK
• Unexpected machine movement can cause
serious injury.
• Before performing any work on the machine,
attach a “Do Not Operate” tag to the steering
wheel or the right control lever.
• When carrying out any operation with two or
more workers, always agree on the operating
procedure before starting.
USE TOOLS PROPERLY
• Use a tool only for its designed application.
• Keep all tools in good condition and know the
correct way to use them.
• Decide on a place in the repair workshop to
keep tools and removed parts.
• Always keep the work area clean and make
sure that there is no dirt or oil on the floor.
• Before adding oil or making any repairs, park
the machine on hard, level ground and put
blocks under the wheels to prevent the
mahcine from moving.
• Before starting work, lower the forks or any
other work equipment to the ground.
• Turn the engine OFF, remove the start key,
and apply the parking brake.
• Illuminate your work area adequately but safely.
Use a portable safety light for working inside
or under the machine. Make sure the bulb is
enclosed by a wire cage. The hot filament of
an accidentally broken bulb can ignite spilled
fuel or oil.
EX033
FX1008
EX042
8. 5
SAFETY
G E N E R A L
00
03
USE HANDHOLDS AND STEPS
• Do not jump onto or down from the fork lift.
• When getting on or off the fork lift, use the
step provided.
• Do not grasp an operating lever or steering
wheel when getting on or off.
• Always keep the step clean and repaired.
• Never operate with wet or oily hands and feet.
OPERATE FROM THE OPERATOR’S SEAT
• Do not operate the fork lift from any place
other than the designated operator’s position.
• Improper seating may cause serious injury.
FX019
FX020
9. 1
GENERAL
S P E C I F I C A T I O N S
01
01
LOCATION OF COMPONENTS
1. Mast
2. Lift cylinder
3. Control lever (Tilt, Lift)
4. Carriage
5. Forks
6. Overhead guard
7. Steering wheel
8. Driver’s seat
9. Engine hood
10. Counterweight
11. Steering tire
12. Tilt cylinder
13. Driving wheel
14. Frame
15. Steering axle
16. Driving axle
17. Rear hood
18. LPG tank (LPG only)
10. 1
GENERAL INFORMATION
P O W E R T R A I N
20
01
GENERAL INFORMATION
This section describes the method of detaching the transmisson from the vehicle, and the
diassembling, assembling, and overhauling of it.
CAUTION
Cleanliness is of extreme importance in the servicing, repair and overhaul of the
transmission. Before attempting any repairs thoroughly clean the exterior housing to
prevent the possibility of dirt entering the unit. Always conduct repairs in a clean,
dust free environment.
GENERAL
FEATURES
The torque delivered by the engine is multiplied by the torque converter and powershift
transmission to a maximum of 2.00 times, and is transmitted via the drive shaft to the axle
differential, axle shaft, final drives and driving wheels.
OPERATION PRINCIPLE AND FUNCTION
Engine →
→ → → →
→ →
Differential Axle shaft Final drive Driving wheel
Torque converter Transmission Drive shaft
11. 2
GENERAL INFORMATION
P O W E R T R A I N
20
01
• The torque converter is a type of hydraulic coupling that consists of an impeller connected to
the engine crankshaft, a turbine connected to the converter output shaft, and a stator which
redirects the oil from the turbine for recirculation into the impeller. As the load increases slippage
will occur between the impeller and turbine, so the rotational speed of the turbine will approach
O rpm (stall).
Therefore as the output shaft is decreasing in speed the torque multiplication will increase to
a maximum of 2.0 times when the output shaft is at O rpm.
• The electric shift control unit located on the steering wheel column energizes the selected
solenoid valves thus directing pressurized oil to the directional and range (gear) clutches. The
range and directional clutches direct the power flow through the gear train to provide the desired
speed range and direction. The reduction ratio for the range clutches are : 5.02–1st, 2.56–2nd,
and 1.00–3rd.
• The differential gear assembly consists of the pinion/bevel ring gear set and the differential
gear set. Power delivered from the transmission is reduced by the pinion/ring gear set and
then transmitted to the left/right axle shafts by the differential gear set.
• The final reduction of the power transmitted to the axle shafts occurs in the planetary unit of
each axle hub.
12. 1
TRANSMISSION
P O W E R T R A I N
20
02
TRANSMISSION
DISASSEMBLY
• Remove drive plate attaching capscrews and
washers. Remove drive plate and backing ring.
• Remove torque converter plug retainer ring.
• Remove plug and O–ring.
• Remove torque converter to turbine shaft
retainer ring.
13. 2
TRANSMISSION
P O W E R T R A I N
20
02
• Remove torque converter assembly.
• Remove torque converter to shaft locating ring.
• Remove filter assembly.
• Remove pressure regulator and regulator
sleeve.
Special tool can be fabricated.
14. 3
TRANSMISSION
P O W E R T R A I N
20
02
• Remove charging pump permanent pump hole
cover. (Not used when auxiliay pump is used.)
• Remove pump mounting capscrews and
washers. Remove pump and gasket.
• Remove converter housing to transmission case
capscrews and washers.
• Remove converter housing and gasket.
15. 4
TRANSMISSION
P O W E R T R A I N
20
02
• Remove impeller hub gear.
• Remove solenoid valve cartridge retainer nut
and O–ring.
• Remove solenoid coil and O–ring.
• Loosen solenoid valve cartridge.
16. 5
TRANSMISSION
P O W E R T R A I N
20
02
• Remove valve. Repeat procedures for
remaining solenoid valves.
• Remove bore plug and O–rings. This plug is
used in the middle bore position in the 3 speed
version only.
• Remove spacer plate capscrews and washers.
• Pry spacer plate away from transmission case
at dowel pin holes. Remove spacer plate and
gasket. Note aligning studs to facilitate spacer
removal.
17. 6
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 1st and 2nd clutch assembly.
• Remove forward and reverse clutch assembly.
• Remove 3rd clutch assembly.
• Remove 3rd speed clutch shaft pilot bearing.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 7
TRANSMISSION
P O W E R T R A I N
20
02
• Remove oil baffle capscrew and washer.
• Remove oil baffle.
• Remove oil supply tube O–ring.
• Remove supply tube and screen assembly.
20. 8
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 3rd clutch gear and output shaft.
• Remove 1st and 2nd clutch shaft rear roller
bearing. Remove 3rd gear roller bearing.
• Remove roller bearing locating ring.
• Remove inner case set screw plug. Remove
clutch shaft distributor sleeve set screw.
21. 9
TRANSMISSION
P O W E R T R A I N
20
02
• Use a hammer puller (or any suitable puller) as
shown to remove distributor sleeve and shaft
pilot bearing.
• Pilot bearing and distributor sleeve removed.
• Remove modulator housing sleeve and O–ring.
• Remove inner, middle, and outer valve springs
and valve stop pin.