The document is a service manual that provides information for servicing a forklift truck. It contains 3 sections:
1. The foreword section outlines the purpose and organization of the manual, how to read it, safety symbols used, and general safety precautions.
2. The general specifications section identifies the main components of the forklift truck.
3. The power train section provides an overview of the powertrain system and instructions for disassembling the transmission.
Clark cmp20 30 dlg forklift service repair manual #2fjkskefksmeme
The document provides information on servicing a transaxle. It consists of construction details, maintenance procedures, fluid level checks, filter changes, refilling procedures, pressure specifications, and service brake adjustment instructions. Key points include checking the fluid level when warm, draining and replacing the fluid every 1000 hours, replacing the filter every 500 hours, refilling and priming the system, and adjusting the service brakes to a clearance of 0.255-0.304 mm.
Clark cmp40 50s dl forklift service repair manualfjskksmem
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle, including the axle housing assembly and hub. It describes removing parts like the magnetic plug, brake piston, square rings, and lock plate. Precautions are given, such as supporting heavy parts with slings and cranes, applying grease to parts, and using Loctite on fasteners. The manual is intended as a guide for qualified service technicians to safely perform repairs and maintenance.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Clark cmp20 30 dlg forklift service repair manual #2fdhjsekdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is performed by rotating an adjuster ratchet wheel and releasing a ratchet pawl to set the clearance between shoes and drums.
Clark cmp20 30 dlg forklift service repair manual #2jdfjskekmdme
The document is a service manual that provides instructions for maintaining and repairing a 2000-3000kg forklift. It begins with safety precautions and an overview of how the manual is organized. The manual then describes the structure and maintenance of the forklift's transaxle, including its torque converter, single-speed transmission, integral differential and drive axle, drum brakes, and gears.
Clark sf20 30 dlg forklift service repair manual #2fhhjsjekmdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is accessed through openings in the backing plate or wheel hub/drum.
Toyota 7 bws13 electric walkie low lift pallet truck service repair manualfjskksmem
This document provides safety information and instructions for servicing an electric walkie low-lift pallet truck. It warns technicians to read all safety instructions before operating or servicing the truck. Specific safety warnings are provided for working with batteries, performing welding, and preventing static discharge. The document lists prohibited activities like smoking and open flames. Personal protective equipment like safety shoes and glasses are also indicated.
Toyota 7 bws10 electric walkie low lift pallet truck service repair manualfjskksmem
This document provides safety information and instructions for servicing an electric walkie low-lift pallet truck. It warns technicians to read all safety instructions before operating or servicing the truck. Specific safety warnings are provided for working with batteries, performing welding, and preventing static discharge. The document lists prohibited activities like smoking and open flames. Personal protective equipment like safety shoes and glasses are also indicated.
Clark cmp20 30 dlg forklift service repair manual #2fjkskefksmeme
The document provides information on servicing a transaxle. It consists of construction details, maintenance procedures, fluid level checks, filter changes, refilling procedures, pressure specifications, and service brake adjustment instructions. Key points include checking the fluid level when warm, draining and replacing the fluid every 1000 hours, replacing the filter every 500 hours, refilling and priming the system, and adjusting the service brakes to a clearance of 0.255-0.304 mm.
Clark cmp40 50s dl forklift service repair manualfjskksmem
The document is a service manual that provides instructions for disassembling and assembling components of a drive axle, including the axle housing assembly and hub. It describes removing parts like the magnetic plug, brake piston, square rings, and lock plate. Precautions are given, such as supporting heavy parts with slings and cranes, applying grease to parts, and using Loctite on fasteners. The manual is intended as a guide for qualified service technicians to safely perform repairs and maintenance.
Clark cmc15 20 sl forklift service repair manualfjskksmem
This 3-sentence summary provides the high-level and essential information from the document:
This service manual provides specifications and repair instructions for various models of forklifts manufactured by Samsung, including the SF12-20SD/L/G and SF15-20SLC models. The manual is divided into chapters covering each main system, and sections within chapters cover specific groups to make content easy to understand. Safety precautions are outlined at the beginning to ensure repairs are performed safely.
Clark cmp20 30 dlg forklift service repair manual #2fdhjsekdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is performed by rotating an adjuster ratchet wheel and releasing a ratchet pawl to set the clearance between shoes and drums.
Clark cmp20 30 dlg forklift service repair manual #2jdfjskekmdme
The document is a service manual that provides instructions for maintaining and repairing a 2000-3000kg forklift. It begins with safety precautions and an overview of how the manual is organized. The manual then describes the structure and maintenance of the forklift's transaxle, including its torque converter, single-speed transmission, integral differential and drive axle, drum brakes, and gears.
Clark sf20 30 dlg forklift service repair manual #2fhhjsjekmdme
The document is a service manual that provides instructions for maintaining a transaxle, including checking fluid levels, changing fluids and filters, adjusting brake clearance, and checking hydraulic pressures. Maintenance includes draining fluid from the bottom of the transmission case and filling through the dipstick tube with the engine running. Brake adjustment is accessed through openings in the backing plate or wheel hub/drum.
Toyota 7 bws13 electric walkie low lift pallet truck service repair manualfjskksmem
This document provides safety information and instructions for servicing an electric walkie low-lift pallet truck. It warns technicians to read all safety instructions before operating or servicing the truck. Specific safety warnings are provided for working with batteries, performing welding, and preventing static discharge. The document lists prohibited activities like smoking and open flames. Personal protective equipment like safety shoes and glasses are also indicated.
Toyota 7 bws10 electric walkie low lift pallet truck service repair manualfjskksmem
This document provides safety information and instructions for servicing an electric walkie low-lift pallet truck. It warns technicians to read all safety instructions before operating or servicing the truck. Specific safety warnings are provided for working with batteries, performing welding, and preventing static discharge. The document lists prohibited activities like smoking and open flames. Personal protective equipment like safety shoes and glasses are also indicated.
Toyota 7 bpue15 high level orderpicker service repair manualfjskksmem
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and procedures for various components. The manual provides information to service technicians on maintaining and repairing the orderpicker.
Toyota 6 hbw23 electric walkie pallet jack service repair manualfjskksmem
This document is the service manual for the Toyota Model 6HBW23 4,500 lb. powered pallet walkie. It provides information on safety procedures, systems overview, maintenance guidelines, troubleshooting steps, and procedures for servicing individual components. The manual is designed to help technicians efficiently diagnose and repair issues with the truck.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfjskksmem
This document is a service manual for the Toyota Powered Pallet Walkie. It provides instructions on how to use the manual, which is designed to help technicians of varying experience levels efficiently service the equipment. The manual contains sections on safety, systems overview, planned maintenance, troubleshooting, and procedures for servicing individual components. It aims to guide users to the appropriate information through its organization, contents pages, and indexing system.
Toyota 02 7 fgk40 forklift service repair manualfjskksmem
This document provides service information for the Toyota forklift 7FG/7FD35-45 series including:
1. An overview of the manual contents and how to use it, with explanations of terminology and abbreviations.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and tightening torques for major vehicle systems and components.
3. Reference information such as a component weight list, lubrication chart, and schedules for periodic maintenance and replacement of parts.
Toyota 02 7 fgjf35 forklift service repair manualfjskksmem
This service manual provides instructions for maintenance and repair of Toyota 7FDF/FGF 15-35 ton forklifts. The manual includes sections covering the general information, engine, transmission, propeller shaft, differential, front and rear axles, steering, brakes, body, mast, cylinder, oil pump, oil control valve and more. It provides exploded views of components, removal and installation procedures, inspection and adjustment procedures, lubrication schedules and lists of standard torque specifications.
Toyota 02 7 fgf30 forklift service repair manualfjskksmem
This service manual provides information for servicing Toyota 7FDF/FGF 15-35 material handling vehicles. The manual includes sections covering the general vehicle, engine, transmission, propeller shaft, differential, front and rear axles, steering, brakes, body, mast, cylinder, oil pump, oil control valve and more. It provides exploded views of components, removal and installation instructions, inspection and adjustment procedures, lubrication schedules and other technical details needed for maintenance and repair work. Standard bolt tightening torques and identification methods are also included, along with recommended lubricant types and quantities.
Toyota 02 7 fga50 forklift service repair manualfjskksmem
The document provides service information for Toyota forklifts models 7FG/7FD35-45 series, including:
1. An overview of the manual's contents and related engine repair manuals.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and specifications for major vehicle systems and components.
3. References for standard bolt tightening torques, precoat bolts, high pressure hose fitting torques, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance schedules.
Massey ferguson mf 3435 c crawler tractors (tier 3) parts catalogue manualfjskksmem
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3435 C / CF / CFM crawler tractor engine. It includes lists of parts for the engine assembly, short engine, cylinder block, camshaft, pistons and connecting rods, end cover, cylinder head, and rocker shaft. Each item is identified by part number, quantity, description, and notes indicating whether it is a component of a larger assembly.
Massey ferguson mf 3425 cm crawler type tractor parts catalogue manualfjskksmem
The document provides parts information for the engine of a Massey Ferguson MF 3425 CF/CM crawler-type tractor, including:
- The engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, end cover, cylinder head, rocker shaft, and fuel injection equipment.
- It lists each part, the part number, quantity, and a brief description. Comments are included for some items noting if they are components of larger assemblies.
- The document contains exploded diagrams and part listings for the major engine components to aid in repair or replacement of parts.
Massey ferguson mf 3425 cf crawler type tractor parts catalogue manualfjskksmem
The document provides parts information for the engine of a Massey Ferguson MF 3425 CF/CM crawler-type tractor, including:
- The engine assembly and various engine components like the cylinder block, crankshaft, pistons, connecting rods, end cover, cylinder head, and rocker shaft.
- Fuel injection equipment parts like the fuel pump, injectors, nozzles, and wiring harness.
- A sensor pickup used in the engine.
The document lists each part, the quantity required, a description, and in some cases additional information like replacement part numbers or assembly reference numbers.
Massey ferguson mf 3340 c fl crawler-type tractor parts catalogue manualfjskksmem
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3340 C-FL crawler-type tractor engine. It includes lists of parts for the engine assembly, cylinder block, crankshaft and connecting rods, cylinder head, rocker shaft, timing gear and camshaft. Each part is identified by item number, part number, quantity, description, and any relevant comments.
Massey ferguson mf 2630 f tractor (made in india for turkey) parts catalogue ...fjskksmem
The document provides an overview of the engine components for a Massey Ferguson MF 2630 F tractor made in India for Turkey. It contains 11 pages detailing over 50 individual engine parts, including the cylinder block, crankshaft, pistons, cylinder head, valves, camshaft, and timing gear housing. Each component lists the part number, quantity, description, and any additional comments. The document serves as an exploded parts diagram and list for the engine of this specific tractor model and year.
Massey ferguson mf 2625 ge tractor (made in india for turkey) parts catalogue...fjskksmem
The document is an exploded diagram and parts list for the engine of a Massey Ferguson MF 2625 GE tractor made in India for Turkey. It includes 27 labeled components of the engine block assembly, 15 labeled components of the cylinder block assembly, 22 labeled components of the crankshaft, rod and piston assembly, 13 labeled components of the flywheel assembly, 25 labeled components of the timing gear case, 12 labeled components of the timing cover assembly, 25 labeled components of the cylinder head assembly, and 17 labeled components of the intake manifold.
Massey ferguson mf 2620 xtra tractor (made in india for turkey) parts catalog...fjskksmem
This document is a parts catalog for a Massey Ferguson MF 2620 XTRA tractor made in India for Turkey. It contains 11 pages detailing over 200 individual parts for the engine, frame, steering, drive train, hydraulics, electrical systems, platform, chassis, wheels and linkages of the tractor. Each part is listed with its number, quantity, description, and any relevant technical specifications. The parts are grouped by system and each page covers a different subsystem of the tractor.
Massey ferguson mf 2620 ge tractor (made in india for turkey) parts catalogue...fjskksmem
This document provides a table of contents and specifications for engine parts of a Massey Ferguson MF 2620 GE tractor made in India for Turkey. It includes sections for the engine, cylinder block, crankshaft, pistons, cylinder head, and other engine components. Each section lists the relevant parts by item number, part number, quantity, description, and other specifications.
Massey ferguson mf 698 t tractor ( 1984 (fr)) parts catalogue manualfjskksmem
The document contains specifications for parts related to the engine, cylinders, pistons, crankshaft and cylinder head of a 1984 Massey Ferguson MF 698 T tractor with serial number 1637142. It includes 27 items with descriptions and part numbers. The parts are grouped into sections covering the engine and accessories, engine accessories, fan, cylinder block, flywheel and starter ring, crankshaft, pistons and connecting rods, and cylinder head.
Massey ferguson mf 396 ct crawler (it) parts catalogue manualfjskksmem
This document contains parts listings and technical specifications for engine components of a Massey Ferguson 396 CT crawler tractor. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item listed provides the part number, quantity, description, and any relevant comments. The parts are broken down in detail for the various engine sub-assemblies.
Toyota 7 bpue15 high level orderpicker service repair manualfjskksmem
This document is a service manual for the Toyota Orderpicker Model 7BPUE15 for serial numbers 80,001 and up. It contains sections on safety, systems overview, planned maintenance, troubleshooting, codes and tests, and procedures for various components. The manual provides information to service technicians on maintaining and repairing the orderpicker.
Toyota 6 hbw23 electric walkie pallet jack service repair manualfjskksmem
This document is the service manual for the Toyota Model 6HBW23 4,500 lb. powered pallet walkie. It provides information on safety procedures, systems overview, maintenance guidelines, troubleshooting steps, and procedures for servicing individual components. The manual is designed to help technicians efficiently diagnose and repair issues with the truck.
Toyota 6 hbw20 4000lb powered pallet walkie service repair manualfjskksmem
This document is a service manual for the Toyota Powered Pallet Walkie. It provides instructions on how to use the manual, which is designed to help technicians of varying experience levels efficiently service the equipment. The manual contains sections on safety, systems overview, planned maintenance, troubleshooting, and procedures for servicing individual components. It aims to guide users to the appropriate information through its organization, contents pages, and indexing system.
Toyota 02 7 fgk40 forklift service repair manualfjskksmem
This document provides service information for the Toyota forklift 7FG/7FD35-45 series including:
1. An overview of the manual contents and how to use it, with explanations of terminology and abbreviations.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and tightening torques for major vehicle systems and components.
3. Reference information such as a component weight list, lubrication chart, and schedules for periodic maintenance and replacement of parts.
Toyota 02 7 fgjf35 forklift service repair manualfjskksmem
This service manual provides instructions for maintenance and repair of Toyota 7FDF/FGF 15-35 ton forklifts. The manual includes sections covering the general information, engine, transmission, propeller shaft, differential, front and rear axles, steering, brakes, body, mast, cylinder, oil pump, oil control valve and more. It provides exploded views of components, removal and installation procedures, inspection and adjustment procedures, lubrication schedules and lists of standard torque specifications.
Toyota 02 7 fgf30 forklift service repair manualfjskksmem
This service manual provides information for servicing Toyota 7FDF/FGF 15-35 material handling vehicles. The manual includes sections covering the general vehicle, engine, transmission, propeller shaft, differential, front and rear axles, steering, brakes, body, mast, cylinder, oil pump, oil control valve and more. It provides exploded views of components, removal and installation instructions, inspection and adjustment procedures, lubrication schedules and other technical details needed for maintenance and repair work. Standard bolt tightening torques and identification methods are also included, along with recommended lubricant types and quantities.
Toyota 02 7 fga50 forklift service repair manualfjskksmem
The document provides service information for Toyota forklifts models 7FG/7FD35-45 series, including:
1. An overview of the manual's contents and related engine repair manuals.
2. Sections covering removal and installation procedures, disassembly and reassembly, inspection points, and specifications for major vehicle systems and components.
3. References for standard bolt tightening torques, precoat bolts, high pressure hose fitting torques, wire rope suspension angles, component weights, lubrication charts, and periodic maintenance schedules.
Massey ferguson mf 3435 c crawler tractors (tier 3) parts catalogue manualfjskksmem
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3435 C / CF / CFM crawler tractor engine. It includes lists of parts for the engine assembly, short engine, cylinder block, camshaft, pistons and connecting rods, end cover, cylinder head, and rocker shaft. Each item is identified by part number, quantity, description, and notes indicating whether it is a component of a larger assembly.
Massey ferguson mf 3425 cm crawler type tractor parts catalogue manualfjskksmem
The document provides parts information for the engine of a Massey Ferguson MF 3425 CF/CM crawler-type tractor, including:
- The engine assembly, short engine, cylinder block, crankshaft, pistons and connecting rods, end cover, cylinder head, rocker shaft, and fuel injection equipment.
- It lists each part, the part number, quantity, and a brief description. Comments are included for some items noting if they are components of larger assemblies.
- The document contains exploded diagrams and part listings for the major engine components to aid in repair or replacement of parts.
Massey ferguson mf 3425 cf crawler type tractor parts catalogue manualfjskksmem
The document provides parts information for the engine of a Massey Ferguson MF 3425 CF/CM crawler-type tractor, including:
- The engine assembly and various engine components like the cylinder block, crankshaft, pistons, connecting rods, end cover, cylinder head, and rocker shaft.
- Fuel injection equipment parts like the fuel pump, injectors, nozzles, and wiring harness.
- A sensor pickup used in the engine.
The document lists each part, the quantity required, a description, and in some cases additional information like replacement part numbers or assembly reference numbers.
Massey ferguson mf 3340 c fl crawler-type tractor parts catalogue manualfjskksmem
This document provides part numbers and descriptions for components of a Massey Ferguson MF 3340 C-FL crawler-type tractor engine. It includes lists of parts for the engine assembly, cylinder block, crankshaft and connecting rods, cylinder head, rocker shaft, timing gear and camshaft. Each part is identified by item number, part number, quantity, description, and any relevant comments.
Massey ferguson mf 2630 f tractor (made in india for turkey) parts catalogue ...fjskksmem
The document provides an overview of the engine components for a Massey Ferguson MF 2630 F tractor made in India for Turkey. It contains 11 pages detailing over 50 individual engine parts, including the cylinder block, crankshaft, pistons, cylinder head, valves, camshaft, and timing gear housing. Each component lists the part number, quantity, description, and any additional comments. The document serves as an exploded parts diagram and list for the engine of this specific tractor model and year.
Massey ferguson mf 2625 ge tractor (made in india for turkey) parts catalogue...fjskksmem
The document is an exploded diagram and parts list for the engine of a Massey Ferguson MF 2625 GE tractor made in India for Turkey. It includes 27 labeled components of the engine block assembly, 15 labeled components of the cylinder block assembly, 22 labeled components of the crankshaft, rod and piston assembly, 13 labeled components of the flywheel assembly, 25 labeled components of the timing gear case, 12 labeled components of the timing cover assembly, 25 labeled components of the cylinder head assembly, and 17 labeled components of the intake manifold.
Massey ferguson mf 2620 xtra tractor (made in india for turkey) parts catalog...fjskksmem
This document is a parts catalog for a Massey Ferguson MF 2620 XTRA tractor made in India for Turkey. It contains 11 pages detailing over 200 individual parts for the engine, frame, steering, drive train, hydraulics, electrical systems, platform, chassis, wheels and linkages of the tractor. Each part is listed with its number, quantity, description, and any relevant technical specifications. The parts are grouped by system and each page covers a different subsystem of the tractor.
Massey ferguson mf 2620 ge tractor (made in india for turkey) parts catalogue...fjskksmem
This document provides a table of contents and specifications for engine parts of a Massey Ferguson MF 2620 GE tractor made in India for Turkey. It includes sections for the engine, cylinder block, crankshaft, pistons, cylinder head, and other engine components. Each section lists the relevant parts by item number, part number, quantity, description, and other specifications.
Massey ferguson mf 698 t tractor ( 1984 (fr)) parts catalogue manualfjskksmem
The document contains specifications for parts related to the engine, cylinders, pistons, crankshaft and cylinder head of a 1984 Massey Ferguson MF 698 T tractor with serial number 1637142. It includes 27 items with descriptions and part numbers. The parts are grouped into sections covering the engine and accessories, engine accessories, fan, cylinder block, flywheel and starter ring, crankshaft, pistons and connecting rods, and cylinder head.
Massey ferguson mf 396 ct crawler (it) parts catalogue manualfjskksmem
This document contains parts listings and technical specifications for engine components of a Massey Ferguson 396 CT crawler tractor. It includes lists of parts for the engine assembly, short engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. Each item listed provides the part number, quantity, description, and any relevant comments. The parts are broken down in detail for the various engine sub-assemblies.
Boudoir photography, a genre that captures intimate and sensual images of individuals, has experienced significant transformation over the years, particularly in New York City (NYC). Known for its diversity and vibrant arts scene, NYC has been a hub for the evolution of various art forms, including boudoir photography. This article delves into the historical background, cultural significance, technological advancements, and the contemporary landscape of boudoir photography in NYC.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart
This document announces the winners of the 2024 Youth Poster Contest organized by MATFORCE. It lists the grand prize and age category winners for grades K-6, 7-12, and individual age groups from 5 years old to 18 years old.
Fashionista Chic Couture Maze & Coloring Adventures is a coloring and activity book filled with many maze games and coloring activities designed to delight and engage young fashion enthusiasts. Each page offers a unique blend of fashion-themed mazes and stylish illustrations to color, inspiring creativity and problem-solving skills in children.
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
Heart Touching Romantic Love Shayari In English with ImagesShort Good Quotes
Explore our beautiful collection of Romantic Love Shayari in English to express your love. These heartfelt shayaris are perfect for sharing with your loved one. Get the best words to show your love and care.
Heart Touching Romantic Love Shayari In English with Images
Clark cmp50 75s dl forklift service repair manual
1. SERVICE MANUAL
RATED CAPACITY : 5000~7500kg
SF50-75SD/L
CMP50-75sD/L
#40–1, Ungnam-Dong,
Changwon-City,Kyungnam,
Korea
Part No. 8034927
Manual No. SM690
Manufactured by
Jun,2004
Rev.2
2. 1
FOREWORD
G E N E R A L
00
02
FOREWORD
This shop manual has been prepared as an aid to improve quality of repairs by giving the
serviceman an accurate understanding of the product and by illustrating the correct way to
perform repairs and make judgements. Make sure you understand the contents of this manual
and use it to the full effect at every opportunity.
This shop manual mainly contains the technical information necessary for operations performed
in a service workshop.
For ease of understanding, the manual is divided into sections for each main system of the
machine, and the sections are further divided into groups.
HOW TO READ THIS MANUAL
CHAPTER AND SECTION
This manual is issued as a guide to carrying out repair and maintenance. To easily understand
this manual it is divided as follows :
Example) 10 – 01
Section number (01 : Structure and function)
Chapter number (10 : Engine)
• Improper operation and maintenance of this machine could result in serious injury or death.
• Read the Operation and Maintenance Manual carefully BEFORE operating the machine.
• Always keep the Operation and Maintenance Manual and Parts catalogue near the work
area.
• Obey precautions concerning flammable liquids, hazardous fluids, oils, lubricants and
cleaning solvents.
• To prevent injury to workers, this symbol is used to mark safety precautions in this
manual. The precautions accompanying this symbol should always be followed carefully.
• The specifications contained in this shop manual are subject to change at any time and
without any advance notice. Contact your SAMSUNG distributor for the latest information.
SAFETY
3. 2
FOREWORD
G E N E R A L
00
02
PAGE
Page numbering is started from each section. Therefore, revised pages can be easily inserted.
Also, additional pages and revision number can be indicated.
Ex) 15 – 1
3rd revision
Additional page from page 15
15th page of the section
For the revision status in this manual, refer to REVISION HISTORY.
SYMBOLS
The following symbols as defined below are used in this manual to convey the intent of the
instructions concerning safety and repair.
Symbol Item Remarks
Safety
Caution
Tightening
torque
Tool
Adhesive
Lubricating
Special safety precautions are necessary when
performing the work.
Special technical precautions or other precautions for
preserving standards are necessary when performing
the work.
Places that require special attention for the tightening
torque during assembly.
Places that require proper tools used in assembling
and disassembling.
Places to be applied with adhesive.
Places where oil or lubricant must be added.
4. 1
SAFETY
G E N E R A L
00
03
GENERAL PRECAUTIONS
SAFETY PRECAUTIONS
• When carrying out any operation or maintenance, have trained and experienced personnel carry
out the work.
• When carrying out any operation or maintenance, carefully read the Operation and Maintenance
Manual.
Read all the precautions given on the decals which are fixed to the machine.
SAFETY DEVICE
• Make sure that all guards and covers are mounted in their proper position. Repair or replace
if damaged.
• Pay attention to the method of using any safety locking device or safety belt.
SAFETY CLOTHES AND HELMET
• Wear the specified work clothes in the correct manner.
• Use the specified protective gear (helmet, safety glasses, safety shoes, mask, gloves).
Guard against injury from flying pieces of metal
or debris, wear goggles, gloves and helmet.
Always have a trained and experienced welder
carry out any welding work.
When carrying out welding work, always wear
welding gloves, apron, glasses, cap and other
clothes suitable for welding work.
5. 2
SAFETY
G E N E R A L
00
03
PREPARE FOR EMERGENCIES
• Know where fire extinguishers are located and
how to use them.
• Keep a first aid kit and an eye wash kit near
the work area.
• Keep emergency numbers for doctors, ambul-
ance service, hospital, and fire department near
your telephone.
HANDLE FLUIDS SAFELY–AVOID FIRES
• Handle fuel with care it is highly flammable.
• Do not refuel the machine while smoking or
when near open flame or sparks.
Always stop the engine before refueling
machine. Fill the fuel tank outdoors.
• Store flammable fluids away from fire hazards.
Do not incinerate or puncture pressurized
containers.
DISPOSE OF FLUIDS PROPERLY
• Improperly disposing of fluids can harm the
environment and ecology. Before draining any
fluids, find out the proper way to dispose of
waste from your local environmental agency.
• Catch draining fuel, oil, or other fluids in
suitable containers. Do not use food or
beverage containers that may mislead someone
into drinking from them. Wipe up spills at once.
• Do not pour oil into the ground, down a drain,
or into a stream, pond, or lake. Observe
relevant environmental protection regulations
when disposing of oil, fuel, coolant, brake fluid,
filters, batteries, and other harmful waste.
EX028
EX043
6. 3
SAFETY
G E N E R A L
00
03
AVOID HARMFUL ASBESTOS DUST
• Avoid breathing dust that may be generated
when handling components containing asbestos
fibers. Inhaled asbestos fibers may cause lung
cancer.
EX025
7. 4
SAFETY
G E N E R A L
00
03
PREPARATIONS FOR WORK
WARN OTHERS OF SERVICE WORK
• Unexpected machine movement can cause
serious injury.
• Before performing any work on the machine,
attach a “Do Not Operate” tag to the steering
wheel or the right control lever.
• When carrying out any operation with two or
more workers, always agree on the operating
procedure before starting.
USE TOOLS PROPERLY
• Use a tool only for its designed application.
• Keep all tools in good condition and know the
correct way to use them.
• Decide on a place in the repair workshop to
keep tools and removed parts.
• Always keep the work area clean and make
sure that there is no dirt or oil on the floor.
• Before adding oil or making any repairs, park
the machine on hard, level ground and put
blocks under the wheels to prevent the
mahcine from moving.
• Before starting work, lower the forks or any
other work equipment to the ground.
• Turn the engine OFF, remove the start key,
and apply the parking brake.
• Illuminate your work area adequately but safely.
Use a portable safety light for working inside
or under the machine. Make sure the bulb is
enclosed by a wire cage. The hot filament of
an accidentally broken bulb can ignite spilled
fuel or oil.
EX033
FX1008
EX042
8. 5
SAFETY
G E N E R A L
00
03
USE HANDHOLDS AND STEPS
• Do not jump onto or down from the fork lift.
• When getting on or off the fork lift, use the
step provided.
• Do not grasp an operating lever or steering
wheel when getting on or off.
• Always keep the step clean and repaired.
• Never operate with wet or oily hands and feet.
OPERATE FROM THE OPERATOR’S SEAT
• Do not operate the fork lift from any place
other than the designated operator’s position.
• Improper seating may cause serious injury.
FX019
FX020
9. 1
GENERAL
S P E C I F I C A T I O N S
01
01
LOCATION OF COMPONENTS
1. Mast
2. Lift cylinder
3. Control lever (Tilt, Lift)
4. Carriage
5. Forks
6. Overhead guard
7. Steering wheel
8. Driver’s seat
9. Engine hood
10. Counterweight
11. Steering tire
12. Tilt cylinder
13. Driving wheel
14. Frame
15. Steering axle
16. Driving axle
17. Rear hood
18. LPG tank (LPG only)
10. 1
GENERAL INFORMATION
P O W E R T R A I N
20
01
GENERAL INFORMATION
This section describes the method of detaching the transmisson from the vehicle, and the
diassembling, assembling, and overhauling of it.
CAUTION
Cleanliness is of extreme importance in the servicing, repair and overhaul of the
transmission. Before attempting any repairs thoroughly clean the exterior housing to
prevent the possibility of dirt entering the unit. Always conduct repairs in a clean,
dust free environment.
GENERAL
FEATURES
The torque delivered by the engine is multiplied by the torque converter and powershift
transmission to a maximum of 2.00 times, and is transmitted via the drive shaft to the axle
differential, axle shaft, final drives and driving wheels.
OPERATION PRINCIPLE AND FUNCTION
Engine →
→ → → →
→ →
Differential Axle shaft Final drive Driving wheel
Torque converter Transmission Drive shaft
11. 2
GENERAL INFORMATION
P O W E R T R A I N
20
01
• The torque converter is a type of hydraulic coupling that consists of an impeller connected to
the engine crankshaft, a turbine connected to the converter output shaft, and a stator which
redirects the oil from the turbine for recirculation into the impeller. As the load increases slippage
will occur between the impeller and turbine, so the rotational speed of the turbine will approach
O rpm (stall).
Therefore as the output shaft is decreasing in speed the torque multiplication will increase to
a maximum of 2.0 times when the output shaft is at O rpm.
• The electric shift control unit located on the steering wheel column energizes the selected
solenoid valves thus directing pressurized oil to the directional and range (gear) clutches. The
range and directional clutches direct the power flow through the gear train to provide the desired
speed range and direction. The reduction ratio for the range clutches are : 5.02–1st, 2.56–2nd,
and 1.00–3rd.
• The differential gear assembly consists of the pinion/bevel ring gear set and the differential
gear set. Power delivered from the transmission is reduced by the pinion/ring gear set and
then transmitted to the left/right axle shafts by the differential gear set.
• The final reduction of the power transmitted to the axle shafts occurs in the planetary unit of
each axle hub.
12. 1
TRANSMISSION
P O W E R T R A I N
20
02
TRANSMISSION
DISASSEMBLY
• Remove drive plate attaching capscrews and
washers. Remove drive plate and backing ring.
• Remove torque converter plug retainer ring.
• Remove plug and O–ring.
• Remove torque converter to turbine shaft
retainer ring.
13. 2
TRANSMISSION
P O W E R T R A I N
20
02
• Remove torque converter assembly.
• Remove torque converter to shaft locating ring.
• Remove filter assembly.
• Remove pressure regulator and regulator
sleeve.
Special tool can be fabricated.
14. 3
TRANSMISSION
P O W E R T R A I N
20
02
• Remove charging pump permanent pump hole
cover. (Not used when auxiliay pump is used.)
• Remove pump mounting capscrews and
washers. Remove pump and gasket.
• Remove converter housing to transmission case
capscrews and washers.
• Remove converter housing and gasket.
15. 4
TRANSMISSION
P O W E R T R A I N
20
02
• Remove impeller hub gear.
• Remove solenoid valve cartridge retainer nut
and O–ring.
• Remove solenoid coil and O–ring.
• Loosen solenoid valve cartridge.
16. 5
TRANSMISSION
P O W E R T R A I N
20
02
• Remove valve. Repeat procedures for
remaining solenoid valves.
• Remove bore plug and O–rings. This plug is
used in the middle bore position in the 3 speed
version only.
• Remove spacer plate capscrews and washers.
• Pry spacer plate away from transmission case
at dowel pin holes. Remove spacer plate and
gasket. Note aligning studs to facilitate spacer
removal.
17. 6
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 1st and 2nd clutch assembly.
• Remove forward and reverse clutch assembly.
• Remove 3rd clutch assembly.
• Remove 3rd speed clutch shaft pilot bearing.
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. 7
TRANSMISSION
P O W E R T R A I N
20
02
• Remove oil baffle capscrew and washer.
• Remove oil baffle.
• Remove oil supply tube O–ring.
• Remove supply tube and screen assembly.
20. 8
TRANSMISSION
P O W E R T R A I N
20
02
• Remove 3rd clutch gear and output shaft.
• Remove 1st and 2nd clutch shaft rear roller
bearing. Remove 3rd gear roller bearing.
• Remove roller bearing locating ring.
• Remove inner case set screw plug. Remove
clutch shaft distributor sleeve set screw.
21. 9
TRANSMISSION
P O W E R T R A I N
20
02
• Use a hammer puller (or any suitable puller) as
shown to remove distributor sleeve and shaft
pilot bearing.
• Pilot bearing and distributor sleeve removed.
• Remove modulator housing sleeve and O–ring.
• Remove inner, middle, and outer valve springs
and valve stop pin.