This repair manual provides instructions for repairing Medion 340, 330, 320, and 310 models. It includes sections on general repair instructions, specifications, removing and installing various components of the operator's platform like the cab, heater, air conditioner, seat and controls. Additional sections cover the threshing mechanism, cleaning fan, grain tank, and more. Safety information is provided, along with torque specifications and lubrication charts.
Claas lexion 410 405 combine (type 452) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manualufjjejfksekmme
This is the Highly Detailed factory service repair manual for theCLAAS LEXION 480 CAT NA COMBINE (TYPE 566), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Operator’s Platform
Threshing Mechanism
Cleaning Unit
Grain Delivery
Straw Discharge
Drives
Machine Body
Hydraulic System
Engine
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual.
Thanks for visiting!
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Safety information and specifications are also provided to aid technicians in maintenance and repairs.
CLAAS LEXION 480 Combine (Type 466) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing, disassembling, and installing various components like the air conditioner, steering column, threshing drum, sieves, and cleaning fan. Tightening torques and specifications are also provided.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdff8soekmdmdm
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfzao908wangsa
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided.
Claas lexion 410 405 combine (type 452) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manualufjjejfksekmme
This is the Highly Detailed factory service repair manual for theCLAAS LEXION 480 CAT NA COMBINE (TYPE 566), this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Operator’s Platform
Threshing Mechanism
Cleaning Unit
Grain Delivery
Straw Discharge
Drives
Machine Body
Hydraulic System
Engine
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCLAAS LEXION 480 CAT NA COMBINE (TYPE 566) Service Repair Workshop Manual.
Thanks for visiting!
CLAAS LEXION 480 CAT NA Combine (Type 566) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Safety information and specifications are also provided to aid technicians in maintenance and repairs.
CLAAS LEXION 480 Combine (Type 466) Service Repair Manual.pdfudjkdksmmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing, disassembling, and installing various components like the air conditioner, steering column, threshing drum, sieves, and cleaning fan. Tightening torques and specifications are also provided.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdff8soekmdmdm
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfzao908wangsa
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualuufjdjksekmd
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided.
Claas lexion 480 cat na combine (type 566) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfukdkksmmd
This document provides a repair manual for the LEXION 480 with sections covering: general information including safety rules, specifications, and diagrams; the operator's platform systems including air conditioning, steering, parking brake, foot brake, and electric systems; and the threshing mechanism components including the feed rake conveyor and its related parts. The manual contains detailed instructions for removing, disassembling, inspecting, assembling, and installing the various systems and components to aid technicians in repair work.
Claas lexion 480 cat na combine (type 566) service repair manualuufjdjksekmd
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfifkksem9didok
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 410 405 combine (type 452) service repair manualfjseoldkekm
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualhfhjskedme
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...fhsjekdmme
The document provides instructions for disassembling the travel motor of an excavator model 336F. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...fhsjekdmme
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...fhsjekdmme
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing mounting hardware, and installing replacement parts in the reverse order of removal, taking care to clean parts and apply thread sealant or anti-seize as specified. Safety precautions are provided regarding working on hot or high-voltage components and using isopropyl alcohol.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive assembly, including removing hoses, bolts, seals and other parts. Precautions are given regarding weight of components and proper torque specifications for reinstallation. Detailed illustrations accompany each step of disassembly and assembly.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...fhsjekdmme
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly process describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 336 e lnh excavator (prefix gny) service repair manual (gny00...fhsjekdmme
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...fhsjekdmme
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly process describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...fhsjekdmme
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, installing components in reverse order and noting proper lubrication and torque specifications. The proper procedure aims to prevent injury from spring forces and ensure correct alignment of parts.
More Related Content
Similar to Claas medion 320 combines service repair manual
Claas lexion 480 cat na combine (type 566) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 cat na combine (type 566) service repair manualfjskekfksmem
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
Claas lexion 480 combine (type 466) service repair manualfjjskqazxedmmem
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfukdkksmmd
This document provides a repair manual for the LEXION 480 with sections covering: general information including safety rules, specifications, and diagrams; the operator's platform systems including air conditioning, steering, parking brake, foot brake, and electric systems; and the threshing mechanism components including the feed rake conveyor and its related parts. The manual contains detailed instructions for removing, disassembling, inspecting, assembling, and installing the various systems and components to aid technicians in repair work.
Claas lexion 480 cat na combine (type 566) service repair manualuufjdjksekmd
This document provides a repair manual for the LEXION 480 with information organized into the following sections: general information, operator's platform, threshing mechanism, and more. The general information section includes safety rules, specifications, diagrams, and advice for repair work. The operator's platform section covers air conditioning, steering, parking brake, foot brake, and electric systems. The threshing mechanism section details removing and installing components of the feed rake conveyor such as the suction blower, top shaft, and bottom roller.
CLAAS LEXION 480 Combine Service Repair Manual Instant Download.pdfifkksem9didok
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 480 combine (type 466) service repair manualhfhjskedme
This repair manual provides instructions for repairing a Lexion 480 combine harvester. It contains sections covering the operator's platform, threshing mechanism, cleaning unit, and other systems. Instructions include removing and installing various components, with diagrams showing assemblies in disassembled states. Tightening torques and specifications are also provided to aid in repairs.
Claas lexion 410 405 combine (type 452) service repair manualfjseoldkekm
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualhfhjskedme
This repair manual provides instructions for repairing Lexion combines ranging from models 460 to 405. It covers maintenance and repairs for major systems like the feed rake conveyor, threshing concave, accelerator, threshing drum, impeller, sieves, and cleaning fan. Detailed procedures are provided for removing, disassembling, and installing components. Safety information is also included regarding proper repair practices.
Claas lexion 465 terra trac cat na combine (type 557) service repair manualuufjdjksekmd
This document is a repair manual for CLAAS Lexion combines ranging from models 460 to 405. It contains sections on general repair information, specifications, schematics, and procedures for repairing and replacing components of the combines' air conditioning, steering, braking, electrical, feed rake conveyor, and other systems. The manual provides detailed multi-page instructions on disassembling, troubleshooting, and reassembling various parts of the combines.
Similar to Claas medion 320 combines service repair manual (13)
Caterpillar cat 336 f excavator (prefix tje) service repair manual (tje00001 ...fhsjekdmme
The document provides instructions for disassembling the travel motor of an excavator model 336F. It lists 27 steps to fully disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Detailed illustrations accompany each step to show how to properly remove each component. Safety precautions are provided to warn of potential spring forces and ensure protective equipment is worn during disassembly.
Caterpillar cat 336 f excavator (prefix ljy) service repair manual (ljy00001 ...fhsjekdmme
1. The document provides step-by-step instructions for disassembling and assembling the diesel exhaust fluid module of Caterpillar 336F excavators.
2. The disassembly procedure involves draining the fluid, removing hoses and connectors, and taking apart the various module components like the pump, tank, and control electronics.
3. The assembly procedure lists the parts and tools needed and describes reinstalling the components in reverse order and ensuring proper tightening of connections.
Caterpillar cat 336 f excavator (prefix kcs) service repair manual (kcs00001 ...fhsjekdmme
This document provides instructions for removing and installing various components of a Caterpillar C9.3 engine, including the combustion head, ARD nozzle heater relay, ARD fuel solenoid valve, exhaust manifold, and exhaust elbow. The procedures describe disconnecting electrical connections and fluid lines, removing mounting hardware, and installing replacement parts in the reverse order of removal, taking care to clean parts and apply thread sealant or anti-seize as specified. Safety precautions are provided regarding working on hot or high-voltage components and using isopropyl alcohol.
Caterpillar cat 336 e lnh excavator (prefix ssl) service repair manual (ssl00...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor and final drive assembly, including removing hoses, bolts, seals and other parts. Precautions are given regarding weight of components and proper torque specifications for reinstallation. Detailed illustrations accompany each step of disassembly and assembly.
Caterpillar cat 336 e lnh excavator (prefix rza) service repair manual (rza00...fhsjekdmme
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly process describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 336 e lnh excavator (prefix gny) service repair manual (gny00...fhsjekdmme
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
Caterpillar cat 336 e lh excavator (prefix ssl) service repair manual (ssl000...fhsjekdmme
The document provides instructions for disassembling and assembling components of a 336E excavator final drive and travel motor. It describes in detail how to remove and install the travel motor, including disconnecting hoses and removing mounting bolts. It also explains how to disassemble the final drive by removing the cover, planetary gears, and other internal components. Precise steps and required tools are listed to correctly take apart and rebuild the final drive and travel motor.
Caterpillar cat 336 e lh excavator (prefix rza) service repair manual (rza000...fhsjekdmme
This document provides instructions for disassembling and assembling the travel motor on 336E LH and 336E LNH excavator models. The disassembly process involves removing 27 components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly process describes installing these 27 components in reverse order and provides notes to ensure proper installation of parts. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, driver group, and bearing puller group.
Caterpillar cat 336 e lh excavator (prefix jea) service repair manual (jea000...fhsjekdmme
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps for disassembly, including removing the head, springs, brake piston, rotating assembly, and seals. It then outlines 28 steps for assembly, installing components in reverse order and noting proper lubrication and torque specifications. The proper procedure aims to prevent injury from spring forces and ensure correct alignment of parts.
Caterpillar cat 336 e lh excavator (prefix hdw) service repair manual (hdw000...fhsjekdmme
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes lubricating parts and ensuring proper alignment of components. Special safety notes are included throughout to warn of spring loads and to wear protective equipment when specified.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fhsjekdmme
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper order. It also provides disassembly instructions for a final drive in 13 steps, removing components like bolts, gears, and covers. Installation requires cleaning, applying sealant, and torquing bolts to specified values.
Caterpillar cat 336 e h excavator (prefix jea) service repair manual (jea0000...fhsjekdmme
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It describes 27 steps to disassemble the motor by removing components like the motor head, springs, brake piston, rotating assembly, bearings and seals. It then describes 28 steps for reassembling the motor components in reverse order, making sure to align parts properly, apply lubricants to seals and mating surfaces, and torque bolts to the specified values. The proper procedure is important to safely release spring forces and prevent damage during removal and installation of parts.
Caterpillar cat 336 e h excavator (prefix hdw) service repair manual (hdw0000...fhsjekdmme
The document provides instructions for disassembling and assembling the travel motor on a 336E excavator model. It outlines 27 steps for disassembly, which includes removing the head, seals, springs, brake piston, plates, and seals from various components. It then outlines 28 steps for assembly, which reverses the disassembly process and includes lubricating parts and ensuring proper alignment of components. Special safety notes are included throughout to warn of spring loads and to wear protective equipment when specified.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It outlines 30 steps to disassemble the travel motor down to its core components. It then provides 19 steps to reassemble the travel motor. The document includes illustrations and notes on proper assembly order and tooling required. Safety precautions are provided throughout for tasks involving spring tension or component installation.
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to safely release spring forces during disassembly.
This document provides the disassembly and assembly procedures for a travel motor on 336D2 XE and 336D2 LXE excavator models. It outlines 30 steps to disassemble the travel motor down to its core components. It then provides 19 steps to reassemble the travel motor. The document includes illustrations and notes on proper assembly order and tooling required. Safety precautions are provided throughout for tasks involving spring forces or pressurized components.
Caterpillar cat 336 d2 l excavator (prefix hbk) service repair manual (hbk000...fhsjekdmme
This document provides disassembly instructions for a travel motor on 336D2, 336D2 L, and 336D2 GC excavators. The procedure involves 27 steps to disassemble the various components of the travel motor, including removing the head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Tools and safety precautions are listed. Alignment marks and noting component locations are emphasized to ensure correct reassembly.
Caterpillar cat 336 d2 l excavator (prefix fbt) service repair manual (fbt000...fhsjekdmme
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions are provided for each component, along with illustrations to aid in the process. Safety notices are also included.
Caterpillar cat 336 d2 l excavator (prefix faj) service repair manual (faj000...fhsjekdmme
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pullers, pry bars, and seal removal tools.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. 299 216.0 - RHB MEDION 340 - 310 0.1.1
Contents
1. General information
General .................................................................................. 1.1.1
Introduction ...................................................................... 1.1.1
Introduction into the CLAAS Repair Manual .................... 1.1.2
Explanation of pictorials ................................................... 1.1.3
Safety rules ............................................................................ 1.2.1
Important note ................................................................. 1.2.1
Identification of warning and danger signs ...................... 1.2.2
Intended use .................................................................... 1.2.2
General safety and accident prevention
regulations ....................................................................... 1.2.2
Leaving the machine ....................................................... 1.2.3
Compressor-type air conditioner ...................................... 1.2.3
Maintenance .................................................................... 1.2.3
Basic rule ......................................................................... 1.2.3
Hydraulic accumulators ................................................... 1.2.3
General repair instructions ..................................................... 1.3.1
Reason of damage .......................................................... 1.3.1
Spare parts ...................................................................... 1.3.1
Engine ............................................................................. 1.3.1
Gearboxes ....................................................................... 1.3.1
Alternator ......................................................................... 1.3.1
Tensioning the steel roller chains .................................... 1.3.1
Taper ring fasteners ........................................................ 1.3.1
Self-locking bolts ............................................................. 1.3.1
Liquid locking compound ................................................. 1.3.2
Proper installation of lock collar bearings ........................ 1.3.2
Proper installation of adapter sleeve
bearing ............................................................................. 1.3.2
Ferrule fittings on hydraulic lines ..................................... 1.3.2
Profiled ring fittings on hydraulic lines ............................. 1.3.3
Taper fittings on hydraulic lines ....................................... 1.3.4
Welding Work .................................................................. 1.3.4
Some advice for speedy and correct
repair work ....................................................................... 1.3.4
Torque settings ...................................................................... 1.4.1
Bolts ................................................................................. 1.4.1
Hydraulic screw joints ...................................................... 1.4.2
Brake line screw joints ..................................................... 1.4.3
Wheel bolts ...................................................................... 1.4.4
Specifications ......................................................................... 1.5.1
Lubricants chart ............................................................... 1.5.1
Hydraulic pressures ......................................................... 1.5.4
Engine data ..................................................................... 1.5.6
2. Operator's platform
Cab ........................................................................................ 2.1.1
Removing the front frame ................................................ 2.1.1
Installing the front frame .................................................. 2.1.4
Removing the cab rear panel .......................................... 2.1.6
Installing the cab rear panel ............................................ 2.1.8
Cab heater ............................................................................. 2.2.1
Removing the radiator ..................................................... 2.2.1
Installing the radiator ....................................................... 2.2.3
Removing the regulating valve ........................................ 2.2.5
Installing the regulating valve .......................................... 2.2.7
Air conditioner ........................................................................ 2.3.1
Air conditioner – topping up refrigerant ........................... 2.3.1
Checking the refrigerant oil level /
topping up refrigerant oil ................................................. 2.3.2
Removing the evaporator ................................................ 2.3.4
Air conditioner (cab side), exploded view ........................ 2.3.6
Installing the evaporator .................................................. 2.3.7
Removing the expansion valve ....................................... 2.3.8
Installing the expansion valve ......................................... 2.3.9
Removing the temperature switch ................................. 2.3.10
Installing the temperature switch ................................... 2.3.12
Removing the filter drier ................................................ 2.3.13
Filter drier, exploded view ............................................. 2.3.14
Installing the filter drier .................................................. 2.3.14
Removing the condenser .............................................. 2.3.14
Installing the condenser ................................................ 2.3.15
Removing the air conditioner compressor ..................... 2.3.16
Installing the air conditioner compressor ....................... 2.3.18
Air conditioner compressor –
Removing the electro-magnetic clutch .......................... 2.3.18
Air conditioner compressor Sanden Sd 5 h14,
exploded view ............................................................... 2.3.22
Air conditioner compressor –
Installing the electro-magnetic clutch ............................ 2.3.23
Air conditioner compressor –
Removing the cylinder head /
cylinder head gasket ..................................................... 2.3.26
Air conditioner compressor –
Installing the cylinder head /
cylinder head gasket ..................................................... 2.3.27
Air conditioner compressor –
Removing the shaft seal ................................................ 2.3.29
Air conditioner compressor –
Installing the shaft seal .................................................. 2.3.32
Driver's seat ........................................................................... 2.4.1
Removing the driver's seat .............................................. 2.4.1
Installing the driver's seat ................................................ 2.4.1
Steering ................................................................................. 2.5.1
Removing the steering column ........................................ 2.5.1
Disassembling the steering column ................................ 2.5.5
Steering column, exploded view ..................................... 2.5.6
Assembling the steering column ..................................... 2.5.7
Installing the steering column .......................................... 2.5.8
Removing the steering unit
Danfoss Ospc 125 steering unit .................................... 2.5.11
Installing the steering unit
Danfoss Ospc 125 steering unit .................................... 2.5.12
Checking / adjusting the steering unit
Danfoss Ospc 125 steering unit .................................... 2.5.13
Control elements ................................................................... 2.6.1
Removing the control stick .............................................. 2.6.1
Disassembling the control stick ....................................... 2.6.2
Control stick, exploded view ............................................ 2.6.3
Assembling the control stick ............................................ 2.6.4
Installing the control stick ................................................ 2.6.6
Brakes ................................................................................... 2.7.1
Removing the parking brake rope ................................... 2.7.1
Parking brake, exploded view ......................................... 2.7.3
Installing the parking brake rope ..................................... 2.7.4
Removing the master cylinder ......................................... 2.7.6
Installing the master cylinder ........................................... 2.7.6
3. 0.1.2 RHB MEDION 340 - 310 - 299 216.0
Contents
Gear shift mechanism ............................................................ 2.8.1
Removing the gear shift mechanism ............................... 2.8.1
Disassembling the gear shift mechanism ........................ 2.8.2
Gear shift mechanism, exploded view ............................. 2.8.3
Assembling the gear shift mechanism ............................. 2.8.4
Installing the gear shift mechanism ................................. 2.8.5
Power supply ......................................................................... 2.9.1
Removing the starter ....................................................... 2.9.1
Installing the starter ......................................................... 2.9.1
Removing the alternator .................................................. 2.9.2
Installing the alternator .................................................... 2.9.3
3. Threshing mechanism
Feed rake conveyor ............................................................... 3.1.1
Removing the feed rake conveyor ................................... 3.1.1
Installing the feed rake conveyor ..................................... 3.1.3
Removing the wooden ledges ......................................... 3.1.6
Installing the wooden ledges ........................................... 3.1.8
Replacing the slide rails ................................................. 3.1.10
Replacing the feeder chains .......................................... 3.1.10
Removing the upper feed rake shaft .............................. 3.1.13
Upper feed rake shaft, exploded view
(MEDION 340) ............................................................... 3.1.19
Upper feed rake shaft, exploded view
(MEDION 330 – 310) ..................................................... 3.1.20
Installing the upper feed rake shaft ................................ 3.1.21
Removing the lower feed rake roller .............................. 3.1.24
Disassembling the lower feed rake roller ....................... 3.1.27
Lower feed rake roller, exploded view ........................... 3.1.28
Assembling the lower feed rake roller ............................ 3.1.29
Installing the lower feed rake roller ................................ 3.1.30
Removing the intermediate drive shaft .......................... 3.1.31
Installing the intermediate drive shaft ............................ 3.1.36
Removing the (electric) reverser drive ........................... 3.1.39
Reverser drive (electric), exploded view ........................ 3.1.41
Installing the reverser drive (electric) ............................. 3.1.42
Removing the reverser guard (hydraulic) ...................... 3.1.43
Disassembling the reverser drive
(hydraulic) ...................................................................... 3.1.44
Reverser drive (hydraulic), exploded view ..................... 3.1.45
Assembling the reverser drive (hydraulic) ..................... 3.1.46
Threshing concave ................................................................. 3.2.1
Removing the stone trap .................................................. 3.2.1
Installing the stone trap .................................................... 3.2.2
Basic concave setting ...................................................... 3.2.4
Removing the concave .................................................... 3.2.5
Installing the concave ...................................................... 3.2.9
Threshing drum ...................................................................... 3.3.1
Removing the left threshing drum bearing ....................... 3.3.1
Disassembling the left threshing
drum bearing .................................................................... 3.3.5
Assembling the left threshing drum bearing .................... 3.3.6
Installing the left threshing drum bearing ......................... 3.3.7
Removing the right threshing drum bearing ................... 3.3.11
Disassembling the right threshing
drum bearing .................................................................. 3.3.15
Right threshing drum bearing,
exploded view ................................................................ 3.3.16
Assembling the right threshing
drum bearing ................................................................. 3.3.16
Installing the right threshing drum bearing .................... 3.3.17
Removing the threshing drum ....................................... 3.3.21
Replacing the beater bars ............................................. 3.3.25
Replacing the threshing drum shaft ............................... 3.3.27
Threshing drum, exploded view .................................... 3.3.28
Installing the threshing drum ......................................... 3.3.29
Impeller .................................................................................. 3.4.1
Removing the left impeller bearing .................................. 3.4.1
Installing the left impeller bearing .................................... 3.4.3
Removing the right impeller bearing ................................ 3.4.4
Installing the right impeller bearing .................................. 3.4.6
Removing the impeller ..................................................... 3.4.8
Disassembling the impeller ............................................. 3.4.9
Impeller, exploded view ................................................. 3.4.11
Assembling the impeller ................................................ 3.4.12
Installing the impeller ..................................................... 3.4.13
4. Cleaning unit
Under-walker return floor ....................................................... 4.1.1
Removing the under-walker return floor .......................... 4.1.1
Front rocker arm, exploded view ..................................... 4.1.2
Rear rocker arm, exploded view ...................................... 4.1.2
Installing the under-walker return floor ............................ 4.1.2
Straw walker .......................................................................... 4.2.1
Removing the straw walker racks .................................... 4.2.1
Installing the straw walker racks ...................................... 4.2.3
Removing the front straw walker crankshaft ................... 4.2.5
Installing the front straw walker crankshaft ..................... 4.2.7
Removing the rear straw walker crankshaft .................... 4.2.8
Installing the rear straw walker crankshaft .................... 4.2.12
Disassembling the straw walker crankshafts
(for straw walker crankshafts
with ball bearings) ......................................................... 4.2.15
Straw walker bearing, exploded view ............................ 4.2.16
Assembling the straw walker crankshafts
(for straw walker crankshafts
with ball bearings) ......................................................... 4.2.16
Intensive separation system .................................................. 4.3.1
Removing the front intensive separation
system crankshaft ........................................................... 4.3.1
Installing the front intensive separation
system crankshaft ........................................................... 4.3.4
Removing the rear intensive separation
system crankshaft ........................................................... 4.3.8
Installing the rear intensive separation
system crankshaft ......................................................... 4.3.10
Disassembling the intensive separation
system crankshaft ......................................................... 4.3.13
Assembling the intensive separation
system crankshaft ......................................................... 4.3.14
Replacing the intensive separation
system control shaft ...................................................... 4.3.14
Replacing the agitator tine ............................................. 4.3.15
Sieve pan ............................................................................... 4.4.1
Removing the upper sieves ............................................. 4.4.1
Installing the upper sieves ............................................... 4.4.1
Removing the lower sieves ............................................. 4.4.1
4. 299 216.0 - RHB MEDION 340 - 310 0.1.3
Contents
Installing the lower sieves ................................................ 4.4.1
Removing the sieve frame ............................................... 4.4.2
Sieve frame, exploded view ............................................. 4.4.5
Installing the sieve frame ................................................. 4.4.6
Removing the sieve pan .................................................. 4.4.9
Installing the sieve pan .................................................. 4.4.12
Preparation floor .................................................................... 4.5.1
Removing the preparation floor ....................................... 4.5.1
Preparation floor, exploded view ..................................... 4.5.5
Installing the preparation floor ......................................... 4.5.6
Sieve frame linkage ............................................................... 4.6.1
Removing the 3-D sieve pan control system ................... 4.6.1
Installing the 3-D sieve pan control system ..................... 4.6.1
3-D sieve frame suspension and sieve
pan control system, exploded view .................................. 4.6.2
Adjusting the 3-D sieve pan control system ..................... 4.6.3
Rocker arm drive .................................................................... 4.7.1
Removing the rocker arm drive ........................................ 4.7.1
Rocker arm drive, exploded view ..................................... 4.7.4
Installing the rocker arm drive ......................................... 4.7.6
Cleaning fan ........................................................................... 4.8.1
Removing the left and right cleaning
fan bearings ..................................................................... 4.8.1
Self-aligning ball bearing, exploded view ........................ 4.8.4
Installing the left and right cleaning
fan bearings ..................................................................... 4.8.4
Removing the centre cleaning fan bearing
(MEDION 340) ................................................................. 4.8.8
Centre cleaning fan bearing, exploded view
(MEDION 340) ................................................................. 4.8.8
Installing the centre cleaning fan bearing
(MEDION 340) ................................................................. 4.8.9
Removing the fan shaft
(MEDION 340) ................................................................. 4.8.9
Installing the fan shaft
(MEDION 340) ............................................................... 4.8.12
Removing the fan rotors
(MEDION 340) ............................................................... 4.8.15
Installing the fan rotors
(MEDION 340) ............................................................... 4.8.16
Removing the fan housing
(MEDION 340) ............................................................... 4.8.17
Installing the fan housing
(MEDION 340) ............................................................... 4.8.18
Removing the wind boards
(MEDION 340) ............................................................... 4.8.20
Installing the wind board
(MEDION 340) ............................................................... 4.8.21
Removing the fan blast reduction kit
(MEDION 340) ............................................................... 4.8.22
Installing the fan blast reduction kit
(MEDION 340) ............................................................... 4.8.23
Removing the fan shaft
(MEDION 330 – 310) ..................................................... 4.8.26
Installing the fan shaft
(MEDION 330 – 310) ..................................................... 4.8.26
Replacing the fan blades
(MEDION 330 – 310) ..................................................... 4.8.27
Removing the fan housing
(MEDION 330 – 310) .................................................... 4.8.28
Installing the fan housing
(MEDION 330 – 310) .................................................... 4.8.30
Removing the wind boards
(MEDION 330 – 310) .................................................... 4.8.31
Installing the wind boards
(MEDION 330 – 310) .................................................... 4.8.32
5. Grain delivery
Returns elevator .................................................................... 5.1.1
Removing the returns elevator chain .............................. 5.1.1
Installing the returns elevator chain ................................ 5.1.2
Removing the top returns auger ...................................... 5.1.4
Installing the top returns auger ........................................ 5.1.6
Removing the returns elevator ........................................ 5.1.8
Disassembling the returns elevator ................................. 5.1.8
Assembling the returns elevator .................................... 5.1.10
Installing the returns elevator ........................................ 5.1.12
Removing the bottom returns auger .............................. 5.1.13
Installing the bottom returns auger ................................ 5.1.16
Removing the returns elevator boot .............................. 5.1.19
Installing the returns elevator boot ................................ 5.1.21
Grain elevator ........................................................................ 5.2.1
Removing the grain elevator chain .................................. 5.2.1
Installing the grain elevator chain .................................... 5.2.3
Removing the grain tank filler auger ............................... 5.2.4
Disassembling the grain tank filler auger
angle drive ....................................................................... 5.2.6
Grain tank filler auger, exploded view ............................. 5.2.9
Assembling the grain tank filler auger
angle drive ..................................................................... 5.2.10
Installing the grain tank filler auger ............................... 5.2.12
Removing the grain elevator head ................................ 5.2.13
Disassembling the grain elevator head ......................... 5.2.14
Grain elevator head, exploded view .............................. 5.2.17
Assembling the grain elevator head .............................. 5.2.18
Installing the grain elevator head .................................. 5.2.20
Removing the grain elevator shaft ................................ 5.2.21
Installing the grain elevator shaft .................................. 5.2.22
Removing the grain auger ............................................. 5.2.23
Installing the grain auger ............................................... 5.2.27
Removing the grain elevator boot ................................. 5.2.30
Installing the grain elevator boot ................................... 5.2.31
Grain tank unloading ............................................................. 5.3.1
Removing the lateral augers
(MEDION 340 / 330) ....................................................... 5.3.1
Installing the lateral augers
(MEDION 340 / 330) ....................................................... 5.3.4
Removing the grain tank unloading auger ...................... 5.3.7
Installing the grain tank unloading auger ...................... 5.3.11
Removing the grain tank unloading
tube auger ..................................................................... 5.3.13
Grain tank unloading tube, exploded view .................... 5.3.15
Installing the grain tank unloading
tube auger ..................................................................... 5.3.16
Removing the grain tank unloading tube ....................... 5.3.18
Installing the grain tank unloading tube ......................... 5.3.19
Replacing the wear ring ................................................ 5.3.21
5. 0.1.4 RHB MEDION 340 - 310 - 299 216.0
Contents
Chaff spreader ....................................................................... 5.4.1
Removing the chaff spreader
flange housing ................................................................. 5.4.1
Disassembling the chaff spreader
flange housing ................................................................. 5.4.2
Chaff spreader, exploded view ........................................ 5.4.4
Assembling the chaff spreader
flange housing ................................................................. 5.4.6
Installing the chaff spreader
flange housing ................................................................. 5.4.8
Removing the chaff spreader drive shaft ......................... 5.4.9
Disassembling the chaff spreader
drive shaft ...................................................................... 5.4.10
Assembling the chaff spreader drive shaft ..................... 5.4.11
Installing the chaff spreader drive shaft ......................... 5.4.11
6. Straw discharge
Straw spreader ....................................................................... 6.1.1
Removing the straw spreader .......................................... 6.1.1
Disassembling the straw spreader ................................... 6.1.2
Straw spreader, exploded view ........................................ 6.1.5
Assembling the straw spreader ....................................... 6.1.6
Installing the straw spreader ............................................ 6.1.8
Straw chopper ........................................................................ 6.2.1
Removing the right straw chopper bearing ...................... 6.2.1
Removing the left straw chopper bearing ........................ 6.2.3
Disassembling the left and right straw
chopper bearing ............................................................... 6.2.5
Assembling the left and right straw
chopper bearing ............................................................... 6.2.5
Installing the right straw chopper bearing ........................ 6.2.6
Installing the left straw chopper bearing .......................... 6.2.8
Removing the cutting cylinder .......................................... 6.2.9
Cutting cylinder, exploded view ..................................... 6.2.12
Pre-assembling the cutting cylinder ............................... 6.2.13
Installing the cutting cylinder .......................................... 6.2.14
7. Drives
Drive diagram ......................................................................... 7.1.1
Drive diagram, left side .................................................... 7.1.1
Drive diagram, right side .................................................. 7.1.2
Drive belts on left side ............................................................ 7.2.1
Removing the cutterbar drive belt (1) .............................. 7.2.1
Installing and adjusting the cutterbar
drive belt (1) ..................................................................... 7.2.3
Removing the compressor drive belt (2) .......................... 7.2.5
Installing and adjusting the compressor
drive belt (2) ..................................................................... 7.2.6
Hydrostatic ground drive –
Removing the drive belt (3) .............................................. 7.2.7
Hydrostatic ground drive –
Installing and adjusting the drive belt (3) ......................... 7.2.9
Working hydraulics pump drive –
Removing the drive belt (4) ............................................ 7.2.10
Working hydraulics pump drive –
Installing and adjusting the drive belt (4) ....................... 7.2.11
Removing the threshing mechanism
drive belt (5) ................................................................... 7.2.12
Installing and adjusting the threshing mechanism
drive belt (5) .................................................................. 7.2.13
Removing the grain tank unloading drive
belt (6) ........................................................................... 7.2.15
Installing and adjusting the grain tank unloading
drive belt (6) .................................................................. 7.2.16
Removing the sieve pan / fan intermediate
drive belt (7) .................................................................. 7.2.17
Installing and adjusting the sieve pan /
fan intermediate drive belt (7) ........................................ 7.2.17
Removing the fan variable-speed belt (8) ..................... 7.2.18
Installing the fan variable-speed belt (8) ....................... 7.2.19
Removing the sieve pan intermediate
drive belt (9) .................................................................. 7.2.19
Installing and adjusting the sieve pan
intermediate drive belt (9) .............................................. 7.2.20
Removing the sieve pan drive belt (10) ......................... 7.2.20
Installing and adjusting the sieve pan
drive belt (10) ................................................................ 7.2.21
Removing the straw walker
drive belt (11) ................................................................ 7.2.21
Installing and adjusting the straw walker
drive belt (11) ................................................................ 7.2.22
Removing the intensive separation system
drive belt (12) ................................................................ 7.2.23
Installing and adjusting the intensive separation
system drive belt (12) .................................................... 7.2.24
Removing the straw spreader
drive belt (14) ................................................................ 7.2.24
Installing and adjusting the straw spreader
drive belt (14) ................................................................ 7.2.25
Removing the chaff spreader intermediate
drive belt (15) ................................................................ 7.2.26
Installing and adjusting the chaff spreader
intermediate drive belt (15) ............................................ 7.2.26
Removing the chaff spreader
drive belt (16) ................................................................ 7.2.27
Installing and adjusting the chaff spreader
drive belt (16) ................................................................ 7.2.27
Right drive belt ....................................................................... 7.3.1
Removing the straw chopper drive belt (20) .................... 7.3.1
Installing and adjusting the straw chopper
drive belt (20) .................................................................. 7.3.2
Removing the straw chopper intermediate
drive belt (21) .................................................................. 7.3.3
Installing and adjusting the straw chopper
intermediate drive belt (21) .............................................. 7.3.3
Removing the suction blower
drive belt (22) .................................................................. 7.3.4
Installing and adjusting the suction blower
drive belt (22) .................................................................. 7.3.5
Removing the threshing drum variable-speed
belt (23) ........................................................................... 7.3.6
Installing the threshing drum variable-speed
belt (23) ........................................................................... 7.3.7
Removing the threshing drum drive belt (24) .................. 7.3.8
Installing and adjusting the threshing cylinder
drive belt (24) ................................................................ 7.3.10
6. 299 216.0 - RHB MEDION 340 - 310 0.1.5
Contents
Removing the threshing drum variable-speed belt (25)
(without intermediate drive) ........................................... 7.3.12
Installing the threshing drum variable-speed belt (25)
(without intermediate drive) ........................................... 7.3.13
Removing the rotary chaff screen
drive belt (26) ................................................................. 7.3.14
Installing the rotary chaff screen
drive belt (26) ................................................................. 7.3.15
Removing the rotary chaff screen intermediate
drive belt (27) ................................................................. 7.3.15
Installing and adjusting the rotary chaff screen
intermediate drive belt (27) ............................................ 7.3.16
Removing the alternator /
fan drive belt (28) ........................................................... 7.3.17
Installing the alternator /
fan drive belt (28) ........................................................... 7.3.17
Removing the grain elevator top
drive chain (30) .............................................................. 7.3.18
Installing the grain elevator top
drive chain (30) .............................................................. 7.3.18
Removing the grain tank unloading
intermediate drive chain (31) ......................................... 7.3.19
Installing and adjusting the grain tank unloading
intermediate drive chain (31) ......................................... 7.3.19
Removing the grain tank unloading
intermediate drive chain (32)
(MEDION 340 / 330) ...................................................... 7.3.19
Installing and adjusting the grain tank
unloading intermediate drive chain (32)
(MEDION 340 / 330) ...................................................... 7.3.20
Removing the returns drive chain (33) ........................... 7.3.20
Installing and adjusting the returns
drive chain (33) .............................................................. 7.3.21
Treshing mechanism drive on left side .................................. 7.4.1
Removing the threshing mechanism drive
jockey pulley .................................................................... 7.4.1
Treshing mechanism drive jockey pulley,
exploded view .................................................................. 7.4.2
Installing the threshing mechanism
drive jockey pulley ........................................................... 7.4.2
Removing the threshing mechanism
drive V-belt pulley ............................................................ 7.4.3
Installing the threshing mechanism
drive V-belt pulley ............................................................ 7.4.3
Right treshing mechanism drive ............................................. 7.5.1
Removing the threshing drum variable-speed
drive (hydraulic) ............................................................... 7.5.1
Disassembling the threshing drum variable-speed
drive (hydraulic) ............................................................... 7.5.3
Threshing drum variable-speed drive (hydraulic),
exploded view .................................................................. 7.5.5
Assembling the threshing drum variable-speed
drive (hydraulic) ............................................................... 7.5.7
Installing the threshing drum variable-speed
drive (hydraulic) ............................................................... 7.5.9
Removing the threshing drum variable-speed
drive (spring-loaded) ...................................................... 7.5.11
Disassembling the threshing drum variable-speed
drive (spring-loaded) ...................................................... 7.5.13
Threshing drum variable-speed drive (spring-loaded),
exploded view ............................................................... 7.5.16
Assembling the threshing drum variable-speed
drive (spring-loaded) ..................................................... 7.5.18
Installing the threshing drum variable-speed
drive (spring-loaded) ..................................................... 7.5.21
Removing the threshing drum variable-speed
drive intermediate drive ................................................. 7.5.25
Disassembling the threshing drum variable-speed
intermediate drive .......................................................... 7.5.26
Threshing drum variable-speed intermediate drive,
exploded view ............................................................... 7.5.28
Assembling the threshing drum variable-speed
intermediate drive .......................................................... 7.5.29
Installing the threshing drum variable-speed drive
intermediate drive .......................................................... 7.5.31
Removing the drum drive jockey pulley
(with intermediate drive) ................................................ 7.5.32
Drum drive jockey pulley, exploded view
(with intermediate drive) ................................................ 7.5.32
Installing the drum drive jockey pulley
(with intermediate drive) ................................................ 7.5.33
Removing the threshing drum reduction
gearbox ......................................................................... 7.5.34
Disassembling the threshing drum reduction
gearbox ......................................................................... 7.5.35
Threshing drum reduction gearbox,
exploded view ............................................................... 7.5.40
Assembling the threshing drum reduction
gearbox ......................................................................... 7.5.42
Installing the threshing drum reduction
gearbox ......................................................................... 7.5.47
Removing the drum drive V-belt pulley ......................... 7.5.49
Installing the drum drive V-belt pulley ........................... 7.5.50
Cutterbar drive ....................................................................... 7.6.1
Removing the cutterbar clutch ........................................ 7.6.1
Cutterbar clutch, exploded view ...................................... 7.6.5
Installing the cutterbar clutch .......................................... 7.6.7
Removing the cutterbar drive
jockey pulley .................................................................. 7.6.11
Cutterbar drive jockey pulley,
exploded view ............................................................... 7.6.11
Installing the cutterbar drive jockey pulley .................... 7.6.12
Removing the cutterbar drive guide roller ..................... 7.6.13
Cutterbar drive guide roller, exploded view
(MEDION 340) .............................................................. 7.6.13
Cutterbar drive guide roller, exploded view
(MEDION 330 – 310) .................................................... 7.6.13
Installing the cutterbar drive guide roller ....................... 7.6.14
Removing the front cutterbar
drive V-belt pulley .......................................................... 7.6.15
Installing the front cutterbar
drive V-belt pulley .......................................................... 7.6.16
Removing the cutterbar drive slip clutch ....................... 7.6.17
Disassembling the cutterbar
drive slip clutch .............................................................. 7.6.18
Cutterbar drive slip clutch, exploded view ..................... 7.6.20
Assembling the cutterbar drive slip clutch ..................... 7.6.20
Installing the cutterbar drive slip clutch ......................... 7.6.22
7. 0.1.6 RHB MEDION 340 - 310 - 299 216.0
Contents
Straw walker drive .................................................................. 7.7.1
Removing the straw walker
drive jockey pulley ........................................................... 7.7.1
Straw walker drive jockey pulley,
exploded view .................................................................. 7.7.1
Installing the straw walker
drive jockey pulley ........................................................... 7.7.2
Removing the intensive separation
system jockey pulley ........................................................ 7.7.3
Intensive separation system jockey pulley,
exploded view .................................................................. 7.7.3
Installing the intensive separation
system jockey pulley ........................................................ 7.7.4
Removing the intensive separation
system guide roller ........................................................... 7.7.5
Intensive separation system guide roller,
exploded view .................................................................. 7.7.5
Installing the intensive separation system guide roller .... 7.7.6
Sieve pan drive ...................................................................... 7.8.1
Removing the sieve pan /
fan drive intermediate drive jockey pulley ........................ 7.8.1
Sieve pan / fan drive intermediate drive jockey pulley,
exploded view .................................................................. 7.8.1
Installing the sieve pan /
fan drive intermediate drive jockey pulley ........................ 7.8.2
Removing the sieve pan / straw walker drive
intermediate drive guide roller ......................................... 7.8.3
Sieve pan / straw walker drive intermediate drive
guide roller, exploded view .............................................. 7.8.3
Installing the sieve pan / straw walker drive
intermediate drive guide roller ......................................... 7.8.4
Removing the sieve pan / straw walker drive
intermediate drive V-belt pulley ....................................... 7.8.5
Disassembling the sieve pan / straw walker drive
intermediate drive V-belt pulley ....................................... 7.8.6
Sieve pan / straw walker drive intermediate
drive V-belt pulley, exploded view ................................... 7.8.7
Assembling the sieve pan / straw walker drive
intermediate drive V-belt pulley ....................................... 7.8.7
Installing the sieve pan / straw walker drive
intermediate drive V-belt pulley ....................................... 7.8.9
Removing the sieve pan drive guide roller ..................... 7.8.10
Sieve pan drive guide roller, exploded view .................. 7.8.10
Installing the sieve pan drive guide roller ....................... 7.8.11
Fan drive ................................................................................ 7.9.1
Removing the fan adjustment (electric) ........................... 7.9.1
Disassembling the fan adjustment (electric) .................... 7.9.2
Fan adjustment (electric), exploded view ........................ 7.9.3
Assembling the fan adjustment (electric) ......................... 7.9.4
Installing the fan adjustment (electric) ............................. 7.9.6
Removing the fan variable-speed
drive (electric) .................................................................. 7.9.7
Disassembling the fan variable-speed
drive (electric) .................................................................. 7.9.8
Fan variable-speed drive (electric), exploded view
(MEDION 340) ............................................................... 7.9.10
Fan variable-speed drive (electric), exploded view
(MEDION 330 – 310) ..................................................... 7.9.10
Assembling the fan variable-speed
drive (electric) ................................................................ 7.9.11
Installing the fan variable-speed
drive (electric) ................................................................ 7.9.13
Aligning the fan variable-speed pulleys ......................... 7.9.16
Removing the fan variable-speed
drive (spring-loaded) ..................................................... 7.9.17
Disassembling the spring-loaded fan
variable-speed drive ...................................................... 7.9.18
Fan variable-speed drive (spring-loaded),
exploded view ................................................................ 7.9.19
Assembling the spring-loaded fan
variable-speed drive ...................................................... 7.9.20
Installing the fan variable-speed drive
(spring-loaded) .............................................................. 7.9.22
Chaff spreader drive ............................................................ 7.10.1
Removing the chaff spreader
drive bracket .................................................................. 7.10.1
Disassembling the chaff spreader
drive bracket .................................................................. 7.10.2
Chaff spreader bracket, exploded view ......................... 7.10.3
Assembling the chaff spreader
drive bracket .................................................................. 7.10.3
Installing the chaff spreader drive bracket ..................... 7.10.5
Removing the chaff spreader
drive jockey pulley ......................................................... 7.10.6
Chaff spreader drive jockey pulley,
exploded view ................................................................ 7.10.6
Installing the chaff spreader
drive jockey pulley ......................................................... 7.10.7
Grain tank drive ................................................................... 7.11.1
Removing the grain tank
drive jockey pulley ......................................................... 7.11.1
Grain tank drive jockey pulley,
exploded view ................................................................ 7.11.1
Installing the grain tank drive jockey pulley ................... 7.11.2
Removing the grain tank drive
intermediate drive shaft ................................................. 7.11.2
Grain tank drive intermediate drive shaft,
exploded view ................................................................ 7.11.5
Installing the grain tank drive
intermediate drive shaft ................................................. 7.11.6
Removing the grain tank
drive safety clutch .......................................................... 7.11.8
Disassembling the grain tank
drive safety clutch .......................................................... 7.11.9
Grain tank drive safety clutch,
exploded view .............................................................. 7.11.10
Assembling the grain tank
drive safety clutch ........................................................ 7.11.10
Installing the grain tank drive safety clutch .................. 7.11.11
Removing the equalising auger ................................... 7.11.11
Disassembling the equalising auger ............................ 7.11.13
Equalising auger, exploded view ................................. 7.11.15
Assembling the equalising auger ................................ 7.11.16
Installing the equalising auger ..................................... 7.11.18
Straw chopper drive ............................................................. 7.12.1
Removing the straw chopper intermediate
drive jockey pulley ......................................................... 7.12.1
8. 299 216.0 - RHB MEDION 340 - 310 0.1.7
Contents
Straw chopper intermediate drive jockey pulley,
exploded view
(MEDION 340) ............................................................... 7.12.1
Straw chopper intermediate drive jockey pulley,
exploded view
(MEDION 330 – 310
with threshing drum reduction gearbox) ........................ 7.12.2
Straw chopper intermediate drive jockey pulley,
exploded view
(MEDION 330 – 310
without threshing drum reduction gearbox) ................... 7.12.2
Installing the straw chopper intermediate
drive jockey pulley ......................................................... 7.12.3
Removing the straw chopper drive
intermediate drive .......................................................... 7.12.4
Disassembling the straw chopper
drive intermediate drive ................................................. 7.12.5
Straw chopper drive intermediate drive,
exploded view
(MEDION 340) ............................................................... 7.12.7
Assembling the straw chopper drive
intermediate drive .......................................................... 7.12.8
Installing the straw chopper drive
intermediate drive ........................................................ 7.12.10
Removing the straw chopper drive
jockey pulley (stage 1) ................................................. 7.12.11
Straw chopper drive jockey pulley, exploded view
(stage 1) ...................................................................... 7.12.11
Installing the straw chopper drive jockey pulley
(stage 1) ...................................................................... 7.12.12
Removing the straw chopper drive jockey pulley
(stage 2) ...................................................................... 7.12.13
Straw chopper drive jockey pulley, exploded view
(stage 2) ...................................................................... 7.12.13
Installing the straw chopper drive jockey pulley
(stage 2) ...................................................................... 7.12.14
Removing the straw chopper drive guide roller
(stage 2) ...................................................................... 7.12.15
Straw chopper drive guide roller, exploded view
(stage 2) ...................................................................... 7.12.15
Installing the straw chopper drive guide roller
(stage 2) ...................................................................... 7.12.16
Removing the cutting cylinder drive ............................. 7.12.17
Cutting cylinder drive, exploded view .......................... 7.12.17
Installing the cutting cylinder drive ............................... 7.12.18
Straw spreader drive ............................................................ 7.13.1
Removing the straw spreader tensioning
device ............................................................................ 7.13.1
Disassembling the straw spreader tensioning
device ............................................................................ 7.13.2
Straw spreader tensioning device,
exploded view ................................................................ 7.13.3
Assembling the straw spreader tensioning
device ............................................................................ 7.13.4
Installing the straw spreader tensioning
device ............................................................................ 7.13.5
Ground drive ........................................................................ 7.14.1
Removing the ground drive jockey pulley ...................... 7.14.1
Ground drive jockey pulley, exploded view .................... 7.14.1
Installing the ground drive jockey pulley ....................... 7.14.2
Removing the actuating rope ........................................ 7.14.2
Installing the actuating rope .......................................... 7.14.3
Rotary chaff screen drive .................................................... 7.15.1
Removing the rotary chaff screen
drive shaft ...................................................................... 7.15.1
Disassembling the rotary chaff screen
drive shaft ...................................................................... 7.15.2
Rotary chaff screen drive, exploded view ..................... 7.15.6
Assembling the rotary chaff screen
drive shaft ...................................................................... 7.15.7
Installing the rotary chaff screen
drive shaft ...................................................................... 7.15.9
Rotary chaff screen suction blower ..................................... 7.16.1
Removing the rotary chaff screen
suction blower. .............................................................. 7.16.1
Disassembling the rotary chaff screen
suction blower ............................................................... 7.16.1
Rotary chaff screen suction blower,
exploded view ............................................................... 7.16.4
Assembling the rotary chaff screen
suction blower ............................................................... 7.16.5
Installing the rotary chaff screen
suction blower ............................................................... 7.16.7
Drive axle ............................................................................ 7.17.1
Removing the drive axle ................................................ 7.17.1
Installing the drive axle .................................................. 7.17.5
Manual gearbox ................................................................... 7.18.1
Removing the manual gearbox ..................................... 7.18.1
Disassembling the manual gearbox
and the differential ......................................................... 7.18.6
Manual gearbox, exploded view .................................. 7.18.15
Differential, exploded view .......................................... 7.18.16
Assembling the manual gearbox
and the differential ....................................................... 7.18.17
Installing the manual gearbox ..................................... 7.18.31
Brakes ................................................................................. 7.19.1
Removing the brake shoes
of the parking brake ...................................................... 7.19.1
Installing the brake shoes
of the parking brake ...................................................... 7.19.2
Bleeding the brake system ............................................ 7.19.3
Removing the brake linings
of the foot brake ............................................................ 7.19.4
Installing the brake linings
of the foot brake ............................................................ 7.19.6
Removing the fixed caliper ............................................ 7.19.7
Installing the fixed caliper .............................................. 7.19.9
Removing the brake disc ............................................. 7.19.11
Installing the brake disc ............................................... 7.19.12
Final drives .......................................................................... 7.20.1
Removing the axle drives .............................................. 7.20.1
Installing the axle drive .................................................. 7.20.3
Disassembling the axle drive
(MEDION 340) .............................................................. 7.20.5
Axle drive, exploded view
(MEDION 340) ............................................................ 7.20.14
Assembling the axle drive
(MEDION 340) ............................................................ 7.20.16
9. 0.1.8 RHB MEDION 340 - 310 - 299 216.0
Contents
Disassembling the axle drive
(MEDION 330 – 310) ................................................... 7.20.26
Axle drive, exploded view
(MEDION 330 – 310) ................................................... 7.20.32
Assembling the axle drive
(MEDION 330 – 310) ................................................... 7.20.33
Rear axle .............................................................................. 7.21.1
Removing the wheel bearings
(2.05 m rear axle) .......................................................... 7.21.1
Wheel bearing, exploded view
(2.05 m rear axle) .......................................................... 7.21.3
Installing the wheel bearings
(2.05 m rear axle) .......................................................... 7.21.3
Removing the stub axles
(2.05 m rear axle) .......................................................... 7.21.5
Stub axle, exploded view
(2.05 m rear axle) .......................................................... 7.21.8
Installing the stub axles
(2.05 m rear axle) .......................................................... 7.21.8
Removing the wheel bearings
(2.40 m rear axle / adjustable rear axle) ...................... 7.21.10
Wheel bearing, exploded view
(2.40 m rear axle / adjustable rear axle) ...................... 7.21.12
Installing the wheel bearings
(2.40 m rear axle / adjustable rear axle) ...................... 7.21.13
Removing the stub axles
(2.40 m rear axle / adjustable rear axle) ...................... 7.21.15
Stub axle, exploded view
(2.40 m rear axle / adjustable rear axle –
MEDION 330 – 310) .................................................... 7.21.18
Stub axle, exploded view
(adjustable rear axle – MEDION 340) .......................... 7.21.18
Installing the stub axles
(2.40 m rear axle / adjustable rear axle) ...................... 7.21.18
Adjusting the rear axle stops
(2.05 m rear axle, 2.40 m rear axle,
adjustable rear axle) .................................................... 7.21.21
Adjusting the rear axle stops
(CLAAS 4-Trac axle) .................................................... 7.21.22
Adjusting the track width .............................................. 7.21.23
Removing the rear axle ................................................ 7.21.25
Installing the rear axle .................................................. 7.21.27
Removing the CLAAS 4-Trac axle ............................... 7.21.29
Installing the CLAAS 4-Trac axle ................................. 7.21.31
Removing the CLAAS 4-Trac system .......................... 7.21.34
CLAAS 4-Trac system, exploded view ........................ 7.21.37
Installing the CLAAS 4-Trac system ............................ 7.21.38
Removing the stub axle housings
(CLAAS 4-Trac system) ............................................... 7.21.40
Installing the stub axle housings
(CLAAS 4-Trac system) ............................................... 7.21.42
8. Machine body
9. Hydraulic system
Hydraulic tank ........................................................................ 9.1.1
Removing the hydraulic tank ........................................... 9.1.1
Hydraulic tank, exploded view ......................................... 9.1.3
Installing the hydraulic tank ............................................. 9.1.3
Checking the hydraulic oil level
(Hydrostatic ground drive
and working hydraulics) ................................................... 9.1.5
Hydraulic oil cooler ................................................................ 9.2.1
Removing the hydraulic oil cooler ................................... 9.2.1
Installing the hydraulic oil cooler ..................................... 9.2.2
Hydraulic pump ...................................................................... 9.3.1
Removing the double pump ............................................ 9.3.1
Disassembling the double pump ..................................... 9.3.2
Double pump, exploded view .......................................... 9.3.3
Assembling the double pump .......................................... 9.3.3
Installing the double pump .............................................. 9.3.4
Removing the hydraulic variable-displacement pump
(Linde HPV 105) .............................................................. 9.3.7
Hydrostatic ground drive, exploded view
(Linde HPV 105) ............................................................ 9.3.10
Installing the hydraulic variable-displacement pump
(Linde HPV 105) ............................................................ 9.3.11
Venting the hydrostatic system ..................................... 9.3.16
Bleeding the CLAAS 4-Trac system .............................. 9.3.17
Hydraulic motor ..................................................................... 9.4.1
Removing the ground drive hydraulic motor
(Linde HMV 105) ............................................................. 9.4.1
Installing the ground drive hydraulic motor
(Linde HMV 105) ............................................................. 9.4.3
Low-pressure hydraulic system control valves ...................... 9.5.1
Removing the low-pressure hydraulic system
solenoid valve .................................................................. 9.5.1
Low-pressure hydraulic system solenoid valve,
exploded view .................................................................. 9.5.4
Installing the low-pressure hydraulic system
solenoid valve .................................................................. 9.5.5
Removing the low-pressure hydraulic system
pressure relief valve ........................................................ 9.5.6
Installing the low-pressure hydraulic system
pressure relief valve ........................................................ 9.5.7
Adjusting / checking the low-pressure hydraulic
system pressure relief valve ............................................ 9.5.7
Removing the 3-D sieve pan
pendulum control ............................................................. 9.5.8
Disassembling the 3-D sieve pan
pendulum control ............................................................. 9.5.8
3-D sieve pan pendulum control,
exploded view ................................................................ 9.5.10
Assembling the 3-D sieve pan
pendulum control ........................................................... 9.5.11
Installing the 3-D sieve pan
pendulum control ........................................................... 9.5.12
Working hydraulics control valves ......................................... 9.6.1
Removing the grain tank unloading tube lock-up
valve unit ......................................................................... 9.6.1
Grain tank unloading tube lock-up valve unit,
exploded view .................................................................. 9.6.1
Installing the grain tank unloading tube lock-up
valve unit ......................................................................... 9.6.2
Removing the CLAAS Auto-Contour lock-up
valve unit ......................................................................... 9.6.3
CLAAS Auto-Contour lock-up valve unit,
exploded view .................................................................. 9.6.3
10. 299 216.0 - RHB MEDION 340 - 310 0.1.9
Contents
Installing the CLAAS Auto-Contour lock-up
valve unit ......................................................................... 9.6.4
Removing the working hydraulics pressure
relief valve ....................................................................... 9.6.5
Disassembling the working hydraulics pressure
relief valve ....................................................................... 9.6.5
Working hydraulics pressure relief valve,
exploded view .................................................................. 9.6.7
Assembling the working hydraulics pressure
relief valve ....................................................................... 9.6.8
Installing the working hydraulics pressure relief valve ..... 9.6.9
Adjusting / checking the working hydraulics pressure
relief valve ..................................................................... 9.6.10
Removing the front working hydraulics
valve block ..................................................................... 9.6.11
Installing the front working hydraulics
valve block ..................................................................... 9.6.12
Removing the 3/3-way drum speed adjustment valve ... 9.6.12
Disassembling the 3/3-way drum speed
adjustment valve ............................................................ 9.6.13
3/3-way drum speed adjustment valve,
exploded view ................................................................ 9.6.15
Assembling the 3/3-way drum speed
adjustment valve ............................................................ 9.6.16
Installing the 3/3-way drum speed adjustment valve ..... 9.6.17
Removing the 4/3-way hydraulic fore and aft reel
adjustment and CLAAS Auto-Contour solenoid valve ... 9.6.18
4/3-way hydraulic fore and aft reel adjustment and
CLAAS Auto-Contour solenoid valve, exploded view .... 9.6.19
Installing the 4/3-way hydraulic fore and aft reel adjustment
and CLAAS Auto-Contour solenoid valve ...................... 9.6.20
Removing the rear working hydraulics
valve block ..................................................................... 9.6.21
Installing the rear working hydraulics
valve block ..................................................................... 9.6.23
Removing the 3/3-way raise / lower reel and
raise / lower cutterbar solenoid valve ............................ 9.6.23
Disassembling the 3/3-way raise / lower reel and
raise / lower cutterbar solenoid valve ............................ 9.6.24
3/3-way raise / lower reel and raise / lower cutterbar
solenoid valve, exploded view ....................................... 9.6.29
Assembling the 3/3-way
raise/lower reel and
raise/lower cutterbar solenoid valve .............................. 9.6.30
Installing the 3/3-way
raise / lower reel and
raise / lower cutterbar solenoid valve ............................ 9.6.31
Removing the 4/3-way swing grain tank
unloading tube solenoid valve ....................................... 9.6.32
4/3-way swing grain tank unloading tube
solenoid valve, exploded view ....................................... 9.6.33
Installing the 4/3-way swing grain tank unloading tube
solenoid valve ................................................................ 9.6.34
Removing the CLAAS Auto-Contour flow
control valve .................................................................. 9.6.35
CLAAS Auto-Contour flow control valve,
exploded view ................................................................ 9.6.35
Installing the CLAAS Auto-Contour flow
control valve .................................................................. 9.6.36
Removing the CLAAS Autopilot
master valve .................................................................. 9.6.36
CLAAS Autopilot master valve,
exploded view ............................................................... 9.6.37
Installing the CLAAS Autopilot
master valve .................................................................. 9.6.37
Removing the CLAAS Autopilot solenoid
valve block .................................................................... 9.6.38
CLAAS Autopilot solenoid valve block,
exploded view ............................................................... 9.6.40
Installing the CLAAS Autopilot solenoid
valve block .................................................................... 9.6.41
Low-pressure hydraulic system
hydraulic cylinder ................................................................... 9.7.1
Removing the threshing mechanism circuit
hydraulic cylinder ............................................................ 9.7.1
Disassembling the threshing mechanism
circuit hydraulic cylinder .................................................. 9.7.2
Threshing mechanism circuit hydraulic cylinder,
exploded view ................................................................. 9.7.3
Assembling the threshing mechanism circuit
hydraulic cylinder ............................................................ 9.7.4
Installing the threshing mechanism circuit
hydraulic cylinder ............................................................ 9.7.5
Removing the grain tank circuit hydraulic cylinder
(MEDION 340) ................................................................ 9.7.6
Installing the grain tank circuit hydraulic cylinder
(MEDION 340) ................................................................ 9.7.7
Removing the grain tank circuit hydraulic cylinder
(MEDION 330 – 310) ...................................................... 9.7.8
Installing the grain tank circuit hydraulic cylinder
(MEDION 330 – 310) ...................................................... 9.7.9
Disassembling the grain tank circuit
hydraulic cylinder .......................................................... 9.7.10
Grain tank circuit hydraulic cylinder,
exploded view ............................................................... 9.7.11
Assembling the grain tank circuit
hydraulic cylinder .......................................................... 9.7.11
Removing the cutterbar clutch
rotary coupling ............................................................... 9.7.12
Disassembling the cutterbar clutch
rotary coupling ............................................................... 9.7.13
Assembling the cutterbar clutch
rotary coupling ............................................................... 9.7.15
Installing the cutterbar clutch
rotary coupling ............................................................... 9.7.17
Removing the cutterbar clutch
hydraulic cylinder .......................................................... 9.7.17
Disassembling the cutterbar clutch
hydraulic cylinder .......................................................... 9.7.18
Rotary coupling / Cutterbar clutch hydraulic cylinder,
exploded view ............................................................... 9.7.19
Assembling the cutterbar clutch
hydraulic cylinder .......................................................... 9.7.20
Installing the cutterbar clutch
hydraulic cylinder .......................................................... 9.7.22
Removing the 3-D cleaning system
hydraulic cylinder .......................................................... 9.7.22
11. 0.1.10 RHB MEDION 340 - 310 - 299 216.0
Contents
Disassembling the 3-D cleaning system
hydraulic cylinder ........................................................... 9.7.23
3-D sieve pan control system hydraulic cylinder,
exploded view ................................................................ 9.7.25
Assembling the 3-D cleaning system
hydraulic cylinder ........................................................... 9.7.26
Installing the 3-D cleaning system
hydraulic cylinder ........................................................... 9.7.27
Working hydraulics hydraulic cylinders .................................. 9.8.1
Removing the cutterbar cylinders .................................... 9.8.1
Disassembling the cutterbar cylinder ............................... 9.8.2
Cutterbar cylinder, exploded view .................................... 9.8.4
Assembling the cutterbar cylinders .................................. 9.8.5
Installing the cutterbar cylinder ........................................ 9.8.7
Removing the CLAAS Auto-Contour
hydraulic cylinder ............................................................. 9.8.8
Disassembling the CLAAS Auto-Contour
hydraulic cylinder ............................................................. 9.8.8
CLAAS Auto-Contour hydraulic cylinder,
exploded view ................................................................ 9.8.10
Assembling the CLAAS Auto-Contour
hydraulic cylinder ........................................................... 9.8.11
Installing the CLAAS Auto-Contour
hydraulic cylinder ........................................................... 9.8.13
Removing the grain tank unloading tube
hydraulic cylinder ........................................................... 9.8.14
Disassembling the grain tank unloading tube
hydraulic cylinder ........................................................... 9.8.15
Grain tank unloading tube hydraulic cylinder,
exploded view ................................................................ 9.8.17
Assembling the grain tank unloading tube
hydraulic cylinder ........................................................... 9.8.18
Installing the grain tank unloading tube
hydraulic cylinder ........................................................... 9.8.20
Removing the drum variable-speed drive
rotary coupling ............................................................... 9.8.21
Disassembling the drum variable-speed drive
rotary coupling ............................................................... 9.8.22
Assembling the drum variable-speed drive
rotary coupling ............................................................... 9.8.24
Installing the drum variable-speed drive
rotary coupling ............................................................... 9.8.25
Removing the drum variable-speed drive
hydraulic cylinder ........................................................... 9.8.26
Disassembling the drum variable-speed drive
hydraulic cylinder ........................................................... 9.8.26
Drum variable-speed drive hydraulic cylinder,
exploded view ................................................................ 9.8.27
Assembling the drum variable-speed drive
hydraulic cylinder ........................................................... 9.8.28
Installing the drum variable-speed drive
hydraulic cylinder ........................................................... 9.8.29
Removing the reverser drive
hydraulic cylinder ........................................................... 9.8.29
Disassembling the reverser drive
hydraulic cylinder ........................................................... 9.8.30
Reverser drive hydraulic cylinder,
exploded view ................................................................ 9.8.31
Assembling the reverser drive
hydraulic cylinder ........................................................... 9.8.32
Installing the reverser drive
hydraulic cylinder ........................................................... 9.8.33
Adjusting the reverser drive
hydraulic cylinder ........................................................... 9.8.34
Steering hydraulics hydraulic cylinders ................................. 9.9.1
Removing the steering cylinders
(for 2.05 m rear axle) ....................................................... 9.9.1
Disassembling the steering cylinders
(for 2.05 m rear axle) ....................................................... 9.9.2
Steering cylinder, exploded view
(for 2.05 m rear axle) ....................................................... 9.9.3
Assembling the steering cylinders
(for 2.05 m rear axle) ....................................................... 9.9.4
Assembling the steering cylinders
(for 2.05 m rear axle) ....................................................... 9.9.6
Removing the steering cylinders
(for adjustable rear axle,
for CLAAS 4-Trac axle) ................................................... 9.9.7
Disassembling the steering cylinders
(for adjustable rear axle,
for CLAAS 4-Trac axle) ................................................... 9.9.8
Steering cylinder, exploded view
(for adjustable rear axle,
for CLAAS 4-Trac axle) ................................................... 9.9.9
Assembling the steering cylinders
(for adjustable rear axle,
for CLAAS 4-Trac axle) ................................................. 9.9.10
Installing the steering cylinders
(for adjustable rear axle,
for CLAAS 4-Trac axle) ................................................. 9.9.12
10. Engine
Engine output ...................................................................... 10.1.1
Removing the engine output shaft
(DAIMLER CHRYSLER OM 906 LA) ............................ 10.1.1
Engine output, exploded view
(DAIMLER CHRYSLER OM 906 LA) ............................ 10.1.8
Installing the engine output shaft
(DAIMLER CHRYSLER OM 906 LA) ............................ 10.1.9
Engine ................................................................................. 10.2.1
Removing the engine
(DAIMLER CHRYSLER OM 906 LA) ............................ 10.2.1
Installing the engine
(DAIMLER CHRYSLER OM 906 LA) ............................ 10.2.8
Fuel system ......................................................................... 10.3.1
Removing the fuel tank .................................................. 10.3.1
Fuel tank, exploded view ............................................... 10.3.3
Installing the fuel tank .................................................... 10.3.4
Engine cooling system ......................................................... 10.4.1
Removing the radiator ................................................... 10.4.1
Engine cooling system, exploded view
(DaimlerChrysler OM 906 LA) ....................................... 10.4.4
Installing the radiator ..................................................... 10.4.5
Removing the charge air cooler .................................... 10.4.8
Installing the charge air cooler .................................... 10.4.10
11. Index
13. 299 216.0 - RHB MEDION 340 - 310 1.1.1
General
GENERAL Introduction
The present CLAAS REPAIR MANUAL is intended to
assist in preserving the permanent operational readi-
ness and therefore the high value of your CLAAS com-
bine harvester by thorough maintenance and service
supervision.
Experience gathered by both our service engineers
and factory staff has been compiled in this REPAIR
MANUAL.
The sequences of pictures illustrate the course of a
repair process while the text provides the necessary
information on adjustments, application of CLAAS spe-
cial tools and the like.
The illustrations included in support to the explana-
tions show the sequence of major repairs so that
minor repairs can easily be followed.
The CLAAS REPAIR MANUAL is filled in a folder
which allows to insert supplementary pages as issued
following technical developments and to always have
an updated manual at hand for reference.
To be sure, always compare settings and filling capac-
ities with specifications stated in the current Operator's
Manual of the combine-harvester.
CLAAS KGaA mbH
Service Department
14. 1.1.2 RHB MEDION 340 - 310 - 299 216.0
General
Introduction into the CLAAS Repair Manual The CLAAS Repair Manual is subdivided into main
groups and subgroups.
The first digit of the number to be found at the bottom
of each page indicates the main group, the digit follow-
ing the first dot indicates the subgroup and the digit fol-
lowing the second dot the page number. Both pictures
and pages are numbered consecutively in each sub-
group, starting at 1.
Differences between the machine types are high-
lighted by captions or headings. Mechanical proce-
dures applying to all machine types covered in this
manual are kept neutral.
Supplements are realised by adding and/or replacing
the subgroups. Any supplements are filed in the
respective main group / subgroup and the table of con-
tents is updated.
The pictorials serve for quick orientation in recurring
mechanical procedures. Their meanings are explained
at the beginning of this manual.
The "GENERAL REPAIR INFORMATION" section at
the beginning of this manual contains informative
explanations. Read and follow this important informa-
tion. This is the basis of safe and continued function
following a repair.
The table of contents of the main group / subgroup
in question will allow you to locate any mechanical
work description quickly.
16. 299 216.0 - RHB MEDION 340 - 310 2.1.1
Cab
CAB
Removing the front frame
Unscrew panel (A).
(Fig. 1)
Unscrew the windscreen wiper (B).
Unscrew the wiper motor (D) from the windscreen.
(Fig. 2)
Remove the air inlet nozzles (E) on the left and right
side.
(Fig. 3)
Unscrew the doors (F) from the hinge on the side
panel on the left and right side.
(Fig. 4)
A
1
D
B
2
E
3
F
4
17. 2.1.2 RHB MEDION 340 - 310 - 299 216.0
Cab
Unscrew panel (G).
(Fig. 5)
Unscrew clamp (H) and hex. bolt (K).
(Fig. 6)
Unscrew four self-tapping screws at the front edge of
the roof liner (L).
(Fig. 7)
Pull the front part of the roof liner (L) down carefully.
Unscrew four hex. bolts from the top windscreen
frame.
(Fig. 8)
G
5
K
H
6
L
7
L
8
18. 299 216.0 - RHB MEDION 340 - 310 2.1.3
Cab
Unscrew four hex. bolts each from the lateral wind-
screen frames on the left and right side.
(Fig. 9)
Unscrew three hex. bolts (O) from the bottom wind-
screen frame.
Unscrew brackets (P) on the left and right side.
Remove the windscreen completely with the wind-
screen frame, using a suitable suction device if
necessary.
Important!
The windscreen frame is installed using sealing
compound all around. The sealing compound
must be cut out step-by-step with a sharp knife
when removing the windscreen.
Danger!
The windscreen must not be excessively
pressed or pulled while removing it as it will
otherwise suffer stress and may be
destroyed.
Wear gloves during the entire removal
process.
(Fig. 10, 11)
9
O
10
P
11
19. 2.1.4 RHB MEDION 340 - 310 - 299 216.0
Cab
Installing the front frame
Important!
Prior to installation, remove sealing compound
residues from the windscreen frame and the cab
contact points.
1. Apply liquid sealing compound,
e.g. omni FIT FD 10 (part no. 241 880.0),
all around the windscreen frame.
2. Lift the windscreen in front of the cab with a suita-
ble suction device and screw in three hex.
bolts (O) at the bottom windscreen frame and four
hex. bolts each at the lateral windscreen frames
on the left and right side.
3. Bolt down brackets (P) on the left and right side.
(Fig. 12, 13)
4. Screw in four hex. bolts at the top windscreen
frame.
(Fig. 14)
O PP
12
13
14
20. 299 216.0 - RHB MEDION 340 - 310 2.1.5
Cab
5. Screw the roof liner (L) to the top windscreen
frame at the front edge, using four self-tapping
screws.
(Fig. 15)
6. Bolt down clamp (H) and hex. bolt (K).
(Fig. 16)
7. Bolt down panel (G).
(Fig. 17)
8. Bolt down the doors (F) to the hinge on the side
panel on the left and right side.
(Fig. 18)
L
15
K
H
16
G
17
F
18
21. 2.1.6 RHB MEDION 340 - 310 - 299 216.0
Cab
9. Slide on the air inlet nozzles (E) on the left and
right side.
(Fig. 19)
10. Screw the wiper motor (D) to the windscreen.
11. Fit the windscreen wiper (B).
(Fig. 20)
12. Bolt down panel (A).
(Fig. 21)
Removing the cab rear panel
Unlock the operator's seat and pull it fully to the front.
Fold away the seat back.
On the left-hand side unscrew panel (A).
Unscrew panels (B and C).
(Fig. 22)
E
19
D
B
20
A
21
B
C
A
22
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. 299 216.0 - RHB MEDION 340 - 310 2.1.7
Cab
With passenger seat fitted:
– Unscrew covering (D).
– Remove the passenger seat (E).
(Fig. 23)
Unscrew and remove covering (F).
Note!
Two hex. bolts can be found at (G) beneath the
insulation.
(Fig. 24)
Loosen locks (H) and rotate by 90°.
Move flap (K) a little bit forward and then remove it.
(Fig. 25)
D
E
23
F
G
24
K
H
25
24. 2.1.8 RHB MEDION 340 - 310 - 299 216.0
Cab
Installing the cab rear panel
1. Insert flap (K) and fasten with locks (H).
2. Insert and bolt down covering (F).
3. With passenger seat fitted:
– Install the passenger seat (E).
– Bolt down covering (D).
(Fig. 23, 26, 27)
4. Bolt down panels (B and C).
5. Bolt down panel (A) on the left side.
(Fig. 28)
K
H
26
D
E
F
27
B
C
A
28
25. 299 216.0 - RHB MEDION 340 - 310 2.2.1
Cab heater
CAB HEATER
Removing the radiator
Open the cab heater regulating valve completely at
rotary control (A).
(Fig. 1)
Removing the rotary chaff screen drive belt (26), see
page 7.3.14.
Unlock quick-release fasteners (P) of rotary chaff
screen (K) and fold up.
(Fig. 2)
Drain around 5 litres of cooling water at drain cock (B)
and collect in a sufficiently large container.
Environment!
Dispose of cooling water in a way that is harmless
to the environment and in accordance with existing
anti-pollution regulations.
Close the drain cock (B) tightly again after draining.
(Fig. 3)
Unlock the cab roof and fold it up.
Unscrew cover (C) from the cab top.
(Fig. 4)
A
1
K
P
2
B
3
C
4