This document provides specifications for the CLAAS Dominator 106 combine harvester including technical data, dimensions, weights, settings and capacities. It includes details such as the cutterbar widths and height adjustment ranges, threshing equipment components, engine specifications, ground drive systems, transport dimensions, hydraulic system pressures and more. The specifications are provided for the Dominator 106 model as well as smaller Dominator 96, 86, 76, 66 and 56 models.
Liebherr r964 c 1651 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1503 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1448 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r906 1140 classic hydraulic excavator service repair manualfudjjjskeskmmd
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Liebherr r906 1139 classic hydraulic excavator service repair manualfudjjjskeskmmd
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Liebherr lh80 m 1218 (tier4f) hydraulic excavator service repair manualfudjjjskeskmmd
The document discusses the components and maintenance of hydraulic cylinders and shock absorbers. It includes figures and tables showing the parts of differential cylinders, shock absorbers, and hydraulic cylinders that are at risk for corrosion. It also provides recommendations for corrosion inhibitors and paint coatings from Liebherr for protecting hydraulic system components.
Liebherr lh80 c 1529 (tier4f) hydraulic excavator service repair manualfudjjjskeskmmd
The document discusses the components and maintenance of hydraulic cylinders and shock absorbers. It includes figures and tables showing the parts of differential cylinders, shock absorbers, and hydraulic cylinders that are at risk for corrosion. It also provides recommendations for corrosion inhibitors and paint coatings from Liebherr for protecting hydraulic system components.
Liebherr er 942 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Liebherr r964 c 1651 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1503 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r964 c 1448 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Liebherr r906 1140 classic hydraulic excavator service repair manualfudjjjskeskmmd
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Liebherr r906 1139 classic hydraulic excavator service repair manualfudjjjskeskmmd
This document is a service manual for Liebherr hydraulic excavators. It contains technical specifications and instructions for maintenance and repair. The manual is divided into sections covering the engine, hydraulic and electrical systems, swing mechanisms, tracks and other components. Safety symbols are introduced and procedures are marked for requirements, actions, and expected results. The manual is intended to assist technicians while not replacing proper training. It is produced and copyrighted by Liebherr.
Liebherr lh80 m 1218 (tier4f) hydraulic excavator service repair manualfudjjjskeskmmd
The document discusses the components and maintenance of hydraulic cylinders and shock absorbers. It includes figures and tables showing the parts of differential cylinders, shock absorbers, and hydraulic cylinders that are at risk for corrosion. It also provides recommendations for corrosion inhibitors and paint coatings from Liebherr for protecting hydraulic system components.
Liebherr lh80 c 1529 (tier4f) hydraulic excavator service repair manualfudjjjskeskmmd
The document discusses the components and maintenance of hydraulic cylinders and shock absorbers. It includes figures and tables showing the parts of differential cylinders, shock absorbers, and hydraulic cylinders that are at risk for corrosion. It also provides recommendations for corrosion inhibitors and paint coatings from Liebherr for protecting hydraulic system components.
Liebherr er 942 hydraulic excavator service repair manualfudjjjskeskmmd
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js115 t2 excavator service repair manual sn 2397465 and upfudjjjskeskmmd
The document provides instructions for checking the condition of excavator tracks and steel track components. Key steps include cleaning the tracks, measuring track tension and wear of pins/bushes/links, and comparing measurements to specification tables to determine wear percentages. Correct procedures are outlined for inspecting the link rail surface, track pitch, and bush external wear status. The instructions aim to ensure maximum service life by regularly checking track components for signs of premature wear or failure.
Jcb 540 v140 telescopic handler service repair manual sn from 2460601 onwardsfudjjjskeskmmd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 200 telescopic handler service repair manual sn from 2902000 onwardsfudjjjskeskmmd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 170 telescopic handler service repair manual sn from 2460601 onwardsfudjjjskeskmmd
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers various systems of the truck, including the machine, attachments, body, operator station, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The manual instructs technicians on how to safely perform maintenance and repairs, such as removing and installing components like valves, pistons, connecting rods, and bearings. Technical specifications and torque values are also provided.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2460601 on...fudjjjskeskmmd
This manual provides procedures for checking fuel injector operation using diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. Key steps for checking injectors include using diagnostic tools to test for defects while the engine is running. To remove an injector,
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2460601 on...fudjjjskeskmmd
This service manual provides instructions for servicing the components of the Loadall rough terrain variable reach truck, including the 526-56, 531-70, 535-95, 536-60, 536-70, 536-70LP, 541-70, 550-80, and 560-80 models. The manual contains sections on the machine body and framework, operator station, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. Safety information is provided at the beginning advising technicians to fully understand the instructions before working on the machine.
Jcb 526 56 telescopic handler service repair manual sn 2336575 and upfudjjjskeskmmd
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 250 skid steer loader service repair manual sn from 2675500 to 2675700fudjjjskeskmmd
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine overview, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, driveline, hydraulics, and electrical systems. The section summarized focuses on servicing the engine crankshaft, including removal/installation instructions and specifications. Technicians are advised to follow all safety procedures, use the proper tools, and replace all worn parts.
Jcb 250 skid steer loader service repair manual sn from 2478301 to 2478700fudjjjskeskmmd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 9 tst dumper service repair manual sn from grm0011 to grm9989fudjjjskeskmmd
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed removal and installation instructions for fuel system components like high pressure fuel pipes, low pressure fuel pipes, and injector bleed-off pipes. Safety precautions for working on the fuel system are emphasized.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003fudjjjskeskmmd
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx wastemaster eco backhoe loader service repair manual sn from 2442701...fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of the cooling jets is important to prevent oil starvation issues. Precise assembly of the thrust washers and bearing shells is also required to correctly install the crankshaft.
Jcb 5 cx backhoe loader service repair manual sn from 2509500 and upfudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and properly positioning the thrust washers between the crankshaft and rear main bearing. Technicians must follow all removal and installation procedures carefully to ensure the crankshaft and related components are correctly serviced.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 to 2451000fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of new cooling jets is important to prevent blockages that could cause engine failure. Precise assembly of the thrust washers between the crankshaft and rear main bearing is also required.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fudjjjskeskmmd
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how to check its condition and operation, how to remove and install the crankshaft, and specifications for servicing.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of new cooling jets is critical to avoid blocking oil passages. Precise assembly of the thrust washers and bearing shells is also required to prevent misalignment that could restrict oil flow.
Claas axion 850 810 (type a09) tractor service repair manualfudjjjskeskmmd
1) The document provides instructions for removing and refitting the front axle of a CLAAS AXION 850-810 tractor. It describes disconnecting hydraulic lines and electrical harnesses, removing fasteners and components like wheels, axle, and gearbox.
2) Dismantling and reassembling procedures are provided for the epicyclic gearbox, including removing and installing bearings, seals, and planetary gears.
3) The joint unit connecting the axle to the steering is also detailed, with steps for removing and refitting bearings, seals, and other parts in the joint box and supports.
Caterpillar cat th337 c telehandler operator and maintenance manualfudjjjskeskmmd
This document provides an operation and maintenance manual for several models of telehandlers. It contains important safety information and instructions for operating, maintaining and servicing the telehandlers. The manual instructs operators to read it thoroughly and follow the procedures to safely operate the equipment. It also outlines pre-operation inspection procedures, control functions, operating instructions, emergency procedures, maintenance schedules and specifications.
Caterpillar cat th336 c telehandler operator and maintenance manualfudjjjskeskmmd
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures. Contact JLG for any questions.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Jcb js115 t2 excavator service repair manual sn 2397465 and upfudjjjskeskmmd
The document provides instructions for checking the condition of excavator tracks and steel track components. Key steps include cleaning the tracks, measuring track tension and wear of pins/bushes/links, and comparing measurements to specification tables to determine wear percentages. Correct procedures are outlined for inspecting the link rail surface, track pitch, and bush external wear status. The instructions aim to ensure maximum service life by regularly checking track components for signs of premature wear or failure.
Jcb 540 v140 telescopic handler service repair manual sn from 2460601 onwardsfudjjjskeskmmd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 200 telescopic handler service repair manual sn from 2902000 onwardsfudjjjskeskmmd
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The section summarized focuses on servicing the engine valves and connecting rod big-end bearings. It provides removal and installation instructions, component identification diagrams, and technical specifications for the valves and instructions to check the big-end bearings for wear.
Jcb 540 170 telescopic handler service repair manual sn from 2460601 onwardsfudjjjskeskmmd
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers various systems of the truck, including the machine, attachments, body, operator station, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The manual instructs technicians on how to safely perform maintenance and repairs, such as removing and installing components like valves, pistons, connecting rods, and bearings. Technical specifications and torque values are also provided.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2460601 on...fudjjjskeskmmd
This manual provides procedures for checking fuel injector operation using diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. Key steps for checking injectors include using diagnostic tools to test for defects while the engine is running. To remove an injector,
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2460601 on...fudjjjskeskmmd
This service manual provides instructions for servicing the components of the Loadall rough terrain variable reach truck, including the 526-56, 531-70, 535-95, 536-60, 536-70, 536-70LP, 541-70, 550-80, and 560-80 models. The manual contains sections on the machine body and framework, operator station, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. Safety information is provided at the beginning advising technicians to fully understand the instructions before working on the machine.
Jcb 526 56 telescopic handler service repair manual sn 2336575 and upfudjjjskeskmmd
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 250 skid steer loader service repair manual sn from 2675500 to 2675700fudjjjskeskmmd
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine overview, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, driveline, hydraulics, and electrical systems. The section summarized focuses on servicing the engine crankshaft, including removal/installation instructions and specifications. Technicians are advised to follow all safety procedures, use the proper tools, and replace all worn parts.
Jcb 250 skid steer loader service repair manual sn from 2478301 to 2478700fudjjjskeskmmd
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 9 tst dumper service repair manual sn from grm0011 to grm9989fudjjjskeskmmd
This service manual provides instructions for servicing the components of a dumper vehicle, including the machine body and framework, operator station, engine, fuel and exhaust system, cooling system, brake system, steering system, driveline, hydraulic system, electrical system, fasteners and fixings, and consumable products. The document provides detailed removal and installation instructions for fuel system components like high pressure fuel pipes, low pressure fuel pipes, and injector bleed-off pipes. Safety precautions for working on the fuel system are emphasized.
Jcb 9 tft dumper service repair manual sn from hrm1382 to hrm4003fudjjjskeskmmd
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx wastemaster eco backhoe loader service repair manual sn from 2442701...fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of the cooling jets is important to prevent oil starvation issues. Precise assembly of the thrust washers and bearing shells is also required to correctly install the crankshaft.
Jcb 5 cx backhoe loader service repair manual sn from 2509500 and upfudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning the crankcase and bearings, checking crankshaft dimensions, installing new piston cooling jets, and properly positioning the thrust washers between the crankshaft and rear main bearing. Technicians must follow all removal and installation procedures carefully to ensure the crankshaft and related components are correctly serviced.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 to 2451000fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of new cooling jets is important to prevent blockages that could cause engine failure. Precise assembly of the thrust washers between the crankshaft and rear main bearing is also required.
Jcb 3 cx compact backhoe loader service repair manual (sn from 2495456 and up)fudjjjskeskmmd
This service manual provides instructions for servicing a JCB 3CX Compact backhoe loader. It contains sections covering the machine systems including the engine, fuel system, cooling system, brake system, hydraulic system and electrical system. The specific section summarized discusses servicing procedures for the engine crankshaft, including how to check its condition and operation, how to remove and install the crankshaft, and specifications for servicing.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 to 2451000fudjjjskeskmmd
This service manual provides instructions for servicing the crankshaft on a backhoe loader. The crankshaft is a core component that connects the pistons to the flywheel. Key steps in servicing the crankshaft include cleaning it and inspecting the journals for wear. The crankshaft needs to be removed to service other engine components like the main bearings. Proper cleaning and installation of new cooling jets is critical to avoid blocking oil passages. Precise assembly of the thrust washers and bearing shells is also required to prevent misalignment that could restrict oil flow.
Claas axion 850 810 (type a09) tractor service repair manualfudjjjskeskmmd
1) The document provides instructions for removing and refitting the front axle of a CLAAS AXION 850-810 tractor. It describes disconnecting hydraulic lines and electrical harnesses, removing fasteners and components like wheels, axle, and gearbox.
2) Dismantling and reassembling procedures are provided for the epicyclic gearbox, including removing and installing bearings, seals, and planetary gears.
3) The joint unit connecting the axle to the steering is also detailed, with steps for removing and refitting bearings, seals, and other parts in the joint box and supports.
Caterpillar cat th337 c telehandler operator and maintenance manualfudjjjskeskmmd
This document provides an operation and maintenance manual for several models of telehandlers. It contains important safety information and instructions for operating, maintaining and servicing the telehandlers. The manual instructs operators to read it thoroughly and follow the procedures to safely operate the equipment. It also outlines pre-operation inspection procedures, control functions, operating instructions, emergency procedures, maintenance schedules and specifications.
Caterpillar cat th336 c telehandler operator and maintenance manualfudjjjskeskmmd
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures. Contact JLG for any questions.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. GROUP
INDEX
1 Specifications
2 Sectional View of Machine
3 Drive Schematic
4 Cutterbar
5 Threshing Mechanism
6 Elevators and Crop Delivery
7 Engine and Drives
8 Transmission and Chassis
9 Hydraulic System
10 Steering and Rear Axle
11 Electrical System
12 Auxiliary Equipment
Special Notes
4. DO 106 .... 56
1 SPECIFICATIONS DOMINATOR 106
Technical data 1. 1
Weights 1. 4
Dimensions 1. 5
Settings and capacities 1. 7
DOMINATOR 96
Technical data 1. 9
Weights 1.12
Dimensions 1.13
Settings and capacities 1.15
DOMINATOR 86
Technical data 1.17
Weights 1.20
Dimensions 1.21
Settings and capacities 1.23
DOMINATOR 76
Technical data 1.25
Weights 1.28
Dimensions 1.29
Settings and capacities 1.31
DOMINATOR 66
Technical data 1.33
Weights 1.36
Dimensions 1.37
Settings and capacities 1.39
DOMINATOR 56
Technical data 1.41
Weights 1.44
Dimensions 1.45
Settings and capacities 1.47
5. SPECIFICATIONS DOMINATOR 106
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
Cutterbar
Cutting widths
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
Threshing mechanism clutch
DO 106 . .,. ,.56
To be sure, always compare settings and filling'
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) t17ft) (19ft) (22ft) (25ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 1/4 in) above ground level.
with floatation springs in use 950 mm (37 112 in)
with floatation springs blocked 1100 mm (43 1/2 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
hydraulic
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1580 mm (621/4 in), 12 bars
disawning plates underneath the concave, two and three
disawning plates can be engaged separately
width 1580 mm (62 1/4 in)
diameter 450 mm (17 3/4 in)
six rasp bars, seven drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Optional:
a) step pulley drive - 750, 1000, 1200, 1500 1Imin (rpm)
b) slow-speed threshing drum drive kit (chain drive)
from 290 to 680 1/min (rpm)
hydraulic
1.1
6. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engines
Cubic capacity
Max. speed l/min (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
1.2
step type walkers and intensive separation system
(crankshaft with tines)
six
two
220_5 1/min (rpm)
two
six
7.00 m2
(10 850 sq in)
7.95m2
(12322sqin)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
5.10 m2
(7905 sq in)
6500 litres (178.75 U.K. bushels; 184.6 U.S. bushels)
hydraulically operated position control
Mercedes DM 401.901
10455 cm3
(638 in3
)
2390
1150
151 (205)
water
300 litres (66 Imp. gal, 79 U.S. gaU
12 Volt, 143 Ah
7. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
Ground drive
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
hydrostatic, controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operations
3. gear range for road travel
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 6.1 km/h (from 0 to 7.7 km/h)
2. from 0 to 8.9 km/h (from 0 to 11.1 km/h)
3. from 0 to 20.0 km/h (from 0 to 25.5 km/h)
1. from 0 to 4.6 km/h (from 0 to 5.8 km/h)
2. from 0 to 6.6 km/h (from 0 to 8.8 km/h)
3. from 0 to 15.3 km/h (from 0 to 19.0 km/h)
on 23.1-26 R1 / 18.4-34 R1 tyres
1. from 0 to 3.8 mph (from 0 to 4.8 mph)
2. from 0 to 5.5 mph (from 0 to 6.9 mph)
3. from 0 to 12.4 mph (from 0 to 15.8 mph)
1. from 0 to 2.9 mph (from 0 to 3.6 mph)
2. from 0 to 4.1 mph (from 0 to 5.5 mph)
3. from 0 to 9.5 mph (from 0 to 11.8 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brakes
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 7.50 m 6.60 m 5.70 m 5.10 m 4.50m 3.90m
four-row (25 ft) (22 ft) (19 ft) (17 ft) (15 ft) (13 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-3414PR 3.3 (48) - 3.2 (46) 3.2 (46) 3.0 (43) 2.8 (41)
23.1-26 14 PR 2.5 (36) 2.5 (36) 2.3 (33) 2.3 (33) 2.1 (30) 1.9 (27)
28.1-26 12 PR 1.8 (26) 1.8 (26) 1.7 (25) 1.7 (25) 1.6 (23) 1.5 (22)
30.5-32 12 PR 1.5 (22) 1.2 (17) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
14.5/75-20 8 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 =860 Nm (622 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.3
8. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Weights
Combine equipped with 18.4-34 Rl and 14.5/75-20
tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
With bat-type reel
6.60 m (22 ft)
7.50 m (25 ft)
Two cpl. divider assemblies
With straw chopper
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations (not for all countries)
Combine Dimensions
9060 kg (19974 Ib)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2292 Ib)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2446 Ib)
add 1320 kg ( 2910 Ib)
add 1440 kg ( 3175 Ib)
add 50 kg ( 110 Ib)
add 284 kg ( 626 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 254 kg ( 560 Ib)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Thread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
adjustable axle
on 18.4-34 tyres
on 23.1-26 14 PR tyres and
DW 20-26 wheels
on 28.1-26 tyres
2510 mm (98 3/4 in)
2550 mm (100 1/2 in)
2780 mm (109 1/2 in)
2300 mm (90 1/2 in)
2980 mm (117 1/4 in)
3140 mm (123 1/2 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.4
9. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
~-----------L------------.....&
Operatjng Position
3760 mm (148 in)
add 415 mm ( 16 3/8 in)
3720 mm (146 1/2 in)
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50"m
(13 ft) (15ft) (17ft) (19 ft) (22ft) ("25ft)
Overall width 5565 mm 6175 mm 6785 mm 7395 mm 8310 mm 9225 mm
(219 in) (243 in) (267 1/4) (291 1/4) (327 1/4) (363 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize picker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
To top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of grain tank
unloading tube 4020 mm (158 1/4 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L Without dividers
With hoop dividers
With long dividers
With short dividers
Witz maize picker head
, With straw hood back panel
adjusted to rearward position
With straw spreader
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4"in)
add 300 mm ( 11 3/4 in)
add 500 mm ( 19 3/4 in)
1.5
10. 00 106 .... 56
SPECIFICATIONS DOMINATOR 106
.......-----------L--------------..
Transport Position
WIDTH B
HEIGHT H
Cutting width 3.90 m 4.50 m 5.10 m 5.70 m 6.60 m 7.50 m
(13ft) (15ft) (17ft) (19 ft) (22ft) (25ft)
Overall width 4365 mm 4975 mm 5585 mm 6195 mm 7110 mm 8025 mm
(171 3/4) (1953/4) (220 in) (244 in) (280 in) (315 in)
With cutterb6r detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize pic.ker head 3800 mm (149 1/2 in)
With six-row maize picker head 4940 mm (194 1/2 in)
Ta top of grain tank 3760 mm (148 in)
Ta top of cab 3720 mm (146 1/2 in)
On 23.1-26 or 28.1-26 tyres the height dimensions are being
reduced by approx. 40 mm (1 1/2 in).
LENGTH L
1.6
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 in)
11. SPECIFICATIONS DOMINATOR 106
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 100 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 23)
Charge pressure
Operating pressure
Oil Capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LINDE hydrostatic
ground drive system
SAUER hydrostatic ground
drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
5 litres (4.4 Imp. qt; 5.28 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
4 litres each (3.5 Imp. qt; 4.2 U.S. qt) SAE 90
(M IL-L-21 05 B) API-G L-5-90
Hypoid Transmission Oil
approx.7 litres (6.2 Imp.qt; 7.4 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DI N 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.7
12. DO 106 .... 56
SPECIFICATIONS DOMINATOR 106
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e = narrow)
Brakes
Steering
1.8
Foot brake
Hand brake
brake must grip when the pedal is depressed through one
third of its total travel
brake should be effective with the..hand-l-e·locked in the first
three to four teeth in the segment
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
13. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
Technical data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and rejects all responsibility in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50 m
(15 ft)
3-.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 114 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 925 mm (36 112 in)
with floatation springs blocked 1075 mm (42 114 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Cutterbar
Cutting widths
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1Imin (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.9
14. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshaft
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
Engine
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1Imin (rpm)
kW (DIN H.P.)
Cooling
Fuel tank capacity
Battery
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
1.10
step type walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.80 m2
(8990 sq in)
6.60 m2
(10230 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
5200 litres (143 Imp. bushels, 147.7 U.S. bushels)
hydraulically operated position control
Mercedes OM 352 A
5675 cm3 (346 in3 )
2600
1150
110 (150)
water
300 litres (66 Imp. gal, 79 U.S. gal)
12 Volt, 110 Ah
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on 23.1-26 R 1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
15. DO 106 .... 56
SPECIFICATIONS DOMINATOR 96
b) Hydrostatic
Transmission
Ground speeds in kilometers per hour
Forward travel
Reverse travel
Ground speeds in miles per hour
Forward travel
Reverse travel
Traction Wheel Drive
Steering
controlled by lever on operator's platform
three gear ranges in either forward or reverse
1. and 2. gear range for field operation
3. gear range for road travel
on 23.1-26 R1 tyres
1. from 0 to 5.4 km/h (from 0 to· 6.8 km/h)
2. from 0 to 9.9 km/h (from 0 to 12.6 km/h)
3. from 0 to 19.9 km/h (from 0 to 25.3 km/h)
1. from 0 to 4.0 km/h (from 0 to 4.9 km/h)
2. from 0 to 7.4 km/h (from 0 to 8.9 km/h)
3. from 0 to 15.0 km/h (from 0 to 18.0 km/h)
on 23.1-26 R1
1. from 0 to 3.4 mph (from 0 to 4.2 mph)
2. from 0 to 6.2 mph (from 0 to 7.8 mph)
3. from 0 to 12.4 mph (from 0 to 15.7 mph)
1. from 0 to 2.5 mph (from 0 to 3.0 mph)
2. from 0 to 4.6 mph (from 0 to 5.5 mph)
3. from 0 to 11.2 mph (from 0 to 11.2 mph)
Figures in brackets are only applicable for certain countries.
In countries with a speed limit of 20 km/h (12.4 mph) for
self-propelled machinery of husbandry, the hydrostatic drive
system incorporates a device that limits the ground speed
accordingly.
via final drive gears in oil bath
hydrostatic
Brakes
Tyres and Tyre Pressures
Foot brakes
Hand brake
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre maize picker head grain cutterbar
tyre sizes pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
and up
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-34 14 PR 3.3 (48) 3.1 (45) 3.0 (43) 3.0 (43) 2.8 (41) 2.6 (38)
23.1-2612PR 2.1 (30) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
23.1-26 14 PR 2.5 (36) 2.1 (30) 2.0 (29) 2.0 (29) 1.9 (27) 1.7 (25)
28.1-26 12 PR 1.8 (26) 1.6 (23) 1.6 (23) 1.6 (23) 1.5 (22) 1.4 (20)
30.5-3210PR 1.5 (22) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43) 3.0 (43)
14.5/75-20 8 PR - 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35) 2.4 (35)
Where ground conditions allow maximum tyre pressure, the maximum tyre pressure should be maintained in order to
obtain the longest possible service life of the tyre.
Torque Settings of Wheel
Nuts and Wheel Bolts
Front wheels wheel nuts with thrust piece H 22
DIN 74361-10 = 520 Nm (376 ft Ib)
Rear wheels wheel bolts M 18 x 1.5 =325 Nm (235 ft Ib)
1.11
16. DO 106 .... 56
'SPECIFICATIONS DOMINATOR 96
Weights
Combine equipped with 23.1-26 R1 and 12.5/80-18
15 tyres, empty fuel tank and six cylinder engine:
Determine the total weight of the machine·by adding
the weight of the equipment used on the combine to
the weight of the basic machine.
Basic machine (without cutterbar)
With cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10 m (17 ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel weights (one set)
With liquid ballast (magnesium chloride solution) filled into tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7432 kg (16385 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 22931b)
add 1120 kg ( 2469 Ib)
add 1200 kg ( 2646 Ib)
add 50 kg ( 11 0 Ib)
add 264 kg ( 582 Ib)
add 260 kg ( 573 Ib)
add 1260 kg ( 2778 Ib)
add 1510 kg ( 3329 Ib)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 229 Ib)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Turning Diameter, conforming to DIN 70020 Specifications
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
wide axle
adjustäble axle
on 23.1-26 12 PR tyres
and DW 16-26 wheels
on 23.1-26 14 PR tyres
and DW 20-26 wheels
on 18.4-34 tyres
on 28.1-26 tyres
2450 mm (96 1/2 in)
2550 mm (100 1/2 in)
2510 mm (98 3/4 in)
2780 mm (109 1/2 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
3000 mm (118 in)
3140 mm (123 1/2 in)
2980 mm (117 1/4 in)
3500 mm (137 3/4 in)
3650 mm (143 3/4 in)
420 mm (16 1/2 in)
16800 mm (661 1/2 in)
1.12
17. Da 106 .... 56
SPECIFICATIONS DOMINATOR 96
.......-----------L--------------..
Operating Position
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13ft) (15ft) (17ft) (19ft)
Overall width 5190 mm 5565 mm 6175 mm 6785 mm 7395 mm
(204 1/4 in) (219 in) (243 in) (267 1/4 in) (291 1/4 in)
Overall widths are with deflectors set out on each side by
600 mm (23 3/4 in).
With four-row (3 m) maize picker head 3260 mm (128 1/4 in)
With five-row maize oicker head 4060 mm (159 3/4 in)
With six-row maize picker head 5200 mm (204 3/4 in)
HEIGHT H
LENGTH L
Ta top of grain tank
When grain tank lid is open
To top of cab
To bottom edge of gran tank
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
With straw hood back panel
adjusted to rearward position
With straw spreader
3720 mm (146 1/2 in)
add 415 mm ( 16 11/32 in)
3680 mm (144 3{4 in)
3530 mm (139 in)
9190 mm (361 3/4 in)
9550 mm (376 in)
10540 mm (415 in)
10290 mm (405 in)
10220 mm (402 1/4 in)
add 300 mm (11 3/4 in)
add 500 mm (19 3/4 in)
1.13
18. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
...---- B------.e
Transport Position
......- - - - - - - - - - - L---------------l..
WIDTH B Cutting width 3.60 m 3.90 m 4.50 m 5.10 m 5.70 m
(12ft) (13 ft) (15ft) (17ft) (19 ft)
Overall width 3990 mm 4365 mm 4975 mm 5585 mm 6195 mm
(157 in) (171 3/4) '( 195 3/4) (220 in) (244 in)
With cutterbar detached 3000 mm (118 in)
With four-row (3 m) maize picker head 3000 mm (118 in)
With five-row maize picker head 3800 mm (149 1/4 in)
With six-row maize picker head 4940 mm (194 1/2 in)
HEIGHT L
LENGTH L
1.14
To top of grain tank
To top of cab
With cutterbar detached
Without dividers
With hoop dividers
With long dividers
With short dividers
With maize picker head
3720 mm (146 1/2 in)
3680 mm (144 3/4 in)
7770 mm (306 in)
9290 mm (365 3/4 in)
9650 mm (380 in)
10640 mm (419 in)
10390 mm (409 in)
10320 mm (406 1/4 in)
19. SPECIFICATIONS DOMINATOR 96
SETTINGS AND CAPACITIES
Hydraulic Oil Pressures
Lift hydraulic system
pressure relief valve
Hydrostatic steering system
pressure relief valve
Hydrostatic ground drive:
(LINDE hydrostatic pump BPV 70 S)
Charge pressure
Operating pressure
(SAUER hydrostatic pump SPV 22)
Charge pressure
Operating pressure
Oil capacities
Transmission gearbox
Final drive gearboxes
Lift hydraulic system
LI NDE hydrostatic
ground drive system
SAUER hydrostatic
ground drive system
Engines
Slip clutches
Reel
Main table auger
Upper feed rake shaft
Returns elevator
180 bar (2610 psi)
90+5 bar (1305+72.5 psi)
16 bar ( 232 psi)
420 bar (6091 psi)
14 bar ( 203 psi)
420 bar (6091 psi)
• 6 litres (5.3 Imp. qt; 6.3 U.S. qt) SAE 90
(M IL-L-21 05) API-G L-4-90
Transmission Oil
3 litres each (2.6 Imp. qt; 3.2 U.S. qt) SAE 90
(MIL-L-2105) API-GL-4-90
Transmission Oil
approx.6 litres (5.3 Imp. qt, 6.3 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 8 litres (7 Imp. qt; 8.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
approx. 27 litres (23.76 Imp. qt; 28.5 U.S. qt)
Hydraulic Oil, H-LP Oils conforming to
(DIN 51524) ISO-VG 68 Specifications
consult engine instruction book and combine
operator's manual
200 Nm (145 ft Ib)
200 Nm (145 ft Ib)
220 Nm (159 ft Ib)
adjust ratchet clutch so that no play exists
DO 106 .... 56
1.15
20. 00 106 .... 56
SPECIFICATIONS DOMINATOR 96
Shear Bolt
Grain tank unloading system
Knife Register
Reel
Basic setting
Main table auger
Basic setting
Concave
Control (initial) setting
M 10 x 45 DIN 931-8.8
the center of the knife sections should line up with the center
of the cutterbar fingers at each end of the knife stroke
reel drive shaft placed vertically over the knife. The tines
should be adjusted to vertical position.
approx. 15 mm (19/32 in) clearance between auger flights
and bottom of cutterbar
concave entrance: 13 mm (1/2 in)
clearance measured at third concave bar
concave exit:
concave main
adjusting lever:
concave rear
adjusting lever:
3 mm (1/8 in)
clearance measured at third last concave
bar
locked in 3rd hole of quadrant
locked in 1st hole of quadrant
(e =narrow)
Brakes
Steering
1.16
Foot brake
Hand brake
brake must grip when the pedal is depressed through one third
of its total travel
brake should be effective with the handle locked in the first
three to four teeth in the segment.
with the steering cylinder piston rod fully extended, the
adjustable stop bolts must be contacting the steering arms
21. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
TechniCaI data, dimensions and weights are
given as an indication only. CLAAS reserve
the right to make changes in design and
specifications at any time without previous
notice and ejects all responsibilit'! in case
of errors.
NOTE: Front, rear, right and left refer to
direction of travel.
To be sure, always compare settings and filling
capacities with specifications stated in the
appropriate Operator's Manual for the machine
concerned.
5.70 m
(19 ft)
5.10 m
(17 ft)
4.50m
(15 ft)
3.90 m
(13 ft)
3.60 m
(12 ft)
hydraulic
from 360 mm (14 1/4 in) below ground level
to 1300 mm (51 114 in) above ground level
with floatation springs in use 900 mm (35 1/2 in)
with floatation springs blocked 1040 mm (41 in)
belt-operated variable speed drive
hydraulic
chain-type feed rake
belt-operated
Height adjustment
Cutting height range
Cutterbar
Cutting widths
Clearance height under
cutterbar skid
Reel drive
Reel height adjustment
Feeder house
Cutterbar clutch
Threshing Equipment
Stone trap
Concave
Disawning
Threshing drum
standard equipment
adjustable from operator's platform
rear of concave separately adjustable (2nd lever)
width 1320 mm (52 in), 12 bar
disawning plates underneath the concave, two and
three disawning plates can be engaged separately
width 1320 mm (52 in)
diameter 450 mm (17 3/4 in)
six rasp bars, six drum discs
speed infinitely variable from 650 to 1500 1/min (rpm)
Threshing mechanism clutch
Optional:
a) step pulley drive 800, 1000, 1200, 1500 1Imin (rpm)
a1) additional speed 650 1/min (rpm)
b) slow speed threshing drum drive kit, 3-speed chain
drive: 300, 430 and 550 1/min (rpm)
belt-operated
1.17
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. 00 106 .... 56
SPECIFICATIONS DOMINATOR 86
Straw Walkers
Type
No. of walker racks
No. of walker crankshafts
Speed of walker crankshafts
No. of tine crankshafts
No. of tines per crankshafts
Walker area
Separating area
Cleaning
Type
Wind volume control
Total cleaning area
Grain tank
Capacity
Unloading tube
step typ walkers and intensive separation system
(crankshaft with tines)
five
two
220_5 1/min (rpm)
two
five
5.15 m2
(7982.5 sq in)
5.95 m2 (9222.5 sq in)
forced air cleaning fan
by infinitely variable fan speed
additional fan shutters (optional)
4.25 m2
(6588 sq in)
4600 Iitres (126.5 Imp. bushels; 130.6 U.S. bushels)
hydraulically operated position control
Engines
Cubic capacity
Max. speed 1Imin (rpm)
Idle speed 1/min (rpm)
kW (DIN H.P.)
Cooling
Mercedes OM 352
5675 cm3 (346 in3 )
2600
1150
88 (120)
water
Perkins 6.3724
6100 cm3
(372 in3
)
2600
1150
88 (120)
water
Fuel tank capacity
Battery
1.18
300 Iitres (66 Imp. gal; 79 U.S. gal)
12 Volt, 110 Ah
24. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Ground Drive
a) Mechanical
Clutch
Transmission
Speed range
Traction Wheel Drive
Steering
Brakes
Tyres and Tyre Pressures
Foot brake
Hand brake
variable ground speed, hydraulically controlled
dry single disc clutch
three forward, one reverse gear
on, 18.4-30 R1 /.23.1-26 R1 tyres
1. Gear 1.6 to 4.0 km/h (0.9 to 2.5 mph)
2. Gear 3.5 to 8.6 km/h (2.4 to 5.3 mph)
3. Gear 8.0 to 19.7 km/h (5.0 to 12.2 mph)
R.-Gear 2.8 to 6.9 km/h (1.7 to 4.3 mph)
via final drive gears in oil bath
hydrostatic
hydraulic, designed to work independently when the pedal
lock is removed
mechanical, independent of foot brake
maximum minimum tyre pressure
tyre size tyre maize picker head grain cutterbar
pressure six-row five-row 5.70 m 5.10 m 4.50m 3.90 m 3.60 m
four-row (19 ft) (17 ft) (15 ft) (13 ft) (12 ft)
bar (psi) bar (psi) bar (psi) bar (psi) bar (psi) bar (psi)
18.4-30 12 PR 2.9 (42) - - - - 2.9 (42)
18.4~34 12 PR 2.9 (42) - 2.9 (42) 2.9 (42) 2.5 (36) 2.4 (35)
23.1-26 12 PR 2.1 (30) 2.0 (29) 1.9 (27) 1.9 (27) 1.7 (25) 1.6 (23)
28.1-26 12 PR 1.8 (26) 1.5 (22) 1.5 (22) 1.5 (22) 1.1 (16) 1.1 (16)
12.5/80-18 6 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
12.5/80-18 10 PR - 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39) 2.7 (39)
14.5/75-20 8 PR - 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29) 2.0 (29)
Where ground conditions allow maximum tyre_pressure, the maximLam tyre pressure should be maintained in order to
obtain the longest possible service of the tyre.
Torque Settings of Wheel
Bolts and Wheel Nuts
Front wheels with flange nuts M22 x 1.5
and special washer (Limes) C 22.5 DIN 74361
= 520 Nm (376 ft lb)
Rear wheels M 18 x 1.5 wheel bolts = 325 Nm (235 ft lb)
1.19
25. DO 106 .... 56
SPECIFICATIONS DOMINATOR 86
Weights
Combine equipped with 18.4-30 R1 and 12.5/80-18
Impl. tyres, empty fuel tank, six cylinder engine.
Determine the total weight of the machine by adding
the weight of the equipment used on the combine
to the weight of th"e basic machine.
Basic machine (without cutterbar)
With long lip cutterbar and spring tine reel
3.60 m (12 ft)
3.90 m (13 ft)
4.50 m (15 ft)
5.10m(17ft)
5.70 m (19 ft)
Two cpl. divider assemblies
With straw chopper
With cab and ventilating system
With four-row maize picker head
With five-row maize picker head
With six-row maize picker head
With maize head stalk chopper
With wheel vveights (one set)
With liquid ballast (magnesium chloride solution) filled into
12.5/80-18 rear tyres
With extra weights in compliance with road regulations
(not for all countries)
Combine Dimensions
7170 kg (15807 Ib)
add 920 kg ( 20281b)
add 960 kg ( 2116 Ib)
add 1040 kg ( 2293 Ib)
add 1120 kg ( 24691b)
add 1200 kg ( 2646 Ib)
add 50 kg ( 110 Ib)
add 264 kg ( 5821b)
add 260 kg ( 5731b)
add 1260 kg ( 27781b)
add 1510 kg ( 33291b)
add 1740 kg ( 3836 Ib)
add 250 kg ( 551 Ib)
add 104 kg ( 2291b)
add 210 kg ( 4631b)
add 300 kg ( 661 Ib)
Wheel Tread
Width over Tyres
Wheel Base
Ground Clearance
front
rear
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
wide rear axle
adjustable rear axle
on 18.4-30 tyres
on 23.1-26 tyres
on 18.4-34 tyres
2522 mm (99 1/4 in)
2450 mm (96 1/2 in)
2510 mm (99 in)
2050 mm (80 3/4 in)
2300 mm (90 1/2 in)
2500 mm (98 1/2 in)
2700 mm (106 1/4 in)
2967 mm (116 3/4 in)
2985 mm (117 1/2 in)
2975 mm (117 in)
3650 mm (143 3/4 in)
380 mm (15 in)
Turning Diameter, conforming to DIN 70020 Specifications
1.20
15900 mm (626 in)