1) The document provides instructions for making a Pacman controller using materials like paddle pop sticks, cardboard, tin foil, clay, and a Makey Makey board connected to a laptop. 2) The sticks are arranged on cardboard in the shape of arrow keys and connected to the Makey Makey board to control Pacman movement in different directions when touched. 3) An additional stick is used as a click button to start and restart the Pacman game being controlled by the homemade controller.

1. How To Make A Pacman
Controller
By Taylah, Skye, Jaala, Kate

2. What you need?
Paddle pop sticks
cardboard
Makey makey board
clay
Tin foil
Hp laptop
wires
board

3. How to
make the
controller!
Cover the sticks in foil and place them on the
cardboard in the shape of up, down, left and right
on your keyboard. If they don’t hold in their place,
put some plasticine underneath the sticks.

4. How to
make the
Controller!
Get the makey makey USB cord and plug it in on
the makey makey controller and the computer.
Search up a pacman game and go on anyone you
want!

5. How to
make the
Controller!
Then you get one more stick, cover it in foil, and
place it down on some plasticine. That will be your
click button! Get five cords and stick one end in
each bit of plasticine. Then put the other ends in the
correct holes that are on the makey makey
controller.

6. How to
make the
Controller!
Grab another cord and place it in the middle hole at
the bottom of the controller and hold the other end.
With the mouse of the computer, hold the hand
over the word; play game. That is your starting
position.
up
down
left
right

7. How to play
Touch the click button and wait for the game to start. Touch
the left to go left, right to go right, up to go up, and down to go
down.
Remember, always hold the cord that you started of holding,
if you want to actually move!!!
Keep doing all those things and when you’ve lost all your
lives and it goes to the screen your started of with, just press
the click button and play the game!