CCNA Routing and Switching - Connecting Networks
•
0 likes•318 views
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course, as certified by the instructor. Through the course, the student gained proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, serial and broadband connections, and monitoring network operations using syslog, SNMP and NetFlow.
Report
Share
Report
Share
Download to read offline
Recommended
Cert
The student completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course and was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling operations, NAT, network monitoring using syslog, SNMP, and NetFlow, different WAN technologies and their benefits, VPNs and tunneling, and serial and broadband connections according to the instructor's certification.
Cisco Fall2015
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, network monitoring tools, WAN technologies, VPNs, and serial and broadband connections based on the instructor's assessment.
CiscoCertificate4
Muhammad Saqlain Khan completed the CCNA Routing and Switching: Connecting Networks course through the Cisco Networking Academy. As verified by instructor Muhammad Aamir, Khan demonstrated proficiency in understanding, configuring, and troubleshooting WAN technologies including tunneling, NAT, serial and broadband connections, and monitoring network operations using syslog, SNMP and NetFlow. He also understood network architectures and the operations and benefits of VPNs.
CiscoCertificate M4
Umer Haneef completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by instructor Farrukh Nizami at C.T.T.C in Pakistan on July 11, 2016. According to the certificate of completion, Umer was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections as well as monitor network operations using syslog, SNMP, and NetFlow.
CCNA - Routing and Switching
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow, as well as different WAN technologies including serial and broadband connections and the operations and benefits of VPNs.
CCNA Routing and Switching - Connecting Networks
Vladas Kabasinskas completed the CCNA Routing and Switching: Connecting Networks course through the Cisco Networking Academy at Mikkeli University of Applied Sciences in Finland on July 8, 2015, as verified by his instructor. Through the course, Vladas was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections, and monitor network operations using syslog, SNMP, and NetFlow.
20150512221130249VBEJJIMK
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course. They demonstrated proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, NAT, and network monitoring tools. The instructor certified that the student understood and could work with different network architectures, connections, and operations.
Attestation CISCO-Module 4
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by their instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, syslog, SNMP, NetFlow, WANs, VPNs, serial and broadband connections, and describing different network architectures. The instructor certified the student's completion of the course on August 28, 2015.
Recommended
Cert
The student completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course and was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling operations, NAT, network monitoring using syslog, SNMP, and NetFlow, different WAN technologies and their benefits, VPNs and tunneling, and serial and broadband connections according to the instructor's certification.
Cisco Fall2015
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, network monitoring tools, WAN technologies, VPNs, and serial and broadband connections based on the instructor's assessment.
CiscoCertificate4
Muhammad Saqlain Khan completed the CCNA Routing and Switching: Connecting Networks course through the Cisco Networking Academy. As verified by instructor Muhammad Aamir, Khan demonstrated proficiency in understanding, configuring, and troubleshooting WAN technologies including tunneling, NAT, serial and broadband connections, and monitoring network operations using syslog, SNMP and NetFlow. He also understood network architectures and the operations and benefits of VPNs.
CiscoCertificate M4
Umer Haneef completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by instructor Farrukh Nizami at C.T.T.C in Pakistan on July 11, 2016. According to the certificate of completion, Umer was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections as well as monitor network operations using syslog, SNMP, and NetFlow.
CCNA - Routing and Switching
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow, as well as different WAN technologies including serial and broadband connections and the operations and benefits of VPNs.
CCNA Routing and Switching - Connecting Networks
Vladas Kabasinskas completed the CCNA Routing and Switching: Connecting Networks course through the Cisco Networking Academy at Mikkeli University of Applied Sciences in Finland on July 8, 2015, as verified by his instructor. Through the course, Vladas was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections, and monitor network operations using syslog, SNMP, and NetFlow.
20150512221130249VBEJJIMK
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course. They demonstrated proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, NAT, and network monitoring tools. The instructor certified that the student understood and could work with different network architectures, connections, and operations.
Attestation CISCO-Module 4
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course as administered by their instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, syslog, SNMP, NetFlow, WANs, VPNs, serial and broadband connections, and describing different network architectures. The instructor certified the student's completion of the course on August 28, 2015.
Connecting Networks
The student Theodoros Bakopoulos completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by their instructor. Through the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow, as well as different WAN technologies including serial and broadband connections and the operations and benefits of VPNs. The student received a Certificate of Course Completion signed by their instructor on May 29, 2015.
Completion of CCNA Transcript
Abdul Rahuman Kamardeen completed the Cisco CCNA Exploration: LAN Switching and Wireless course, earning a certificate of completion. The hands-on course prepared him for career opportunities in technology by teaching him skills like explaining switching concepts, configuring VLANs and trunking on Cisco switches, and identifying and resolving common network issues. Cisco's chairman congratulated Abdul and wished him continued success in technological literacy.
CiscoCertificate-2
Maria Slabkovskaya completed the Cisco Networking Academy course administered by instructor Sergiy Paliy at Kyiv National University of Construction and Architecture in Ukraine on January 10, 2017. During the course, Ms. Slabkovskaya demonstrated proficiency in explaining Ethernet concepts, building simple networks with routers and switches using Cisco CLI commands, and utilizing network utilities to analyze data traffic and verify small network operations.
Certifiate of Completion Cisco 1
The document is a certificate of completion from the Cisco Networking Academy for the student Ahmed Alrubaye. It certifies that he was able to proficiently explain fundamental Ethernet concepts, build simple Ethernet networks using routers and switches, use Cisco CLI commands to perform basic router and switch configurations, and utilize network utilities to verify small network operations and analyze data traffic for the CCNA Routing and Switching: Introduction to Networks course.
CCNA Routing and Switching - Connecting Networks
The student successfully completed the CCNA Routing and Switching: Connecting Networks course administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow. The student also learned about WAN technologies, VPNs, serial and broadband connections, and describing different network architectures.
CiscoCertificate
The student completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course. During the course, the student proficiently learned to understand, configure, and troubleshoot tunneling, NAT, serial and broadband connections as well as monitor network operations using syslog, SNMP, and NetFlow. The student also understood network architectures and different WAN technologies including VPNs.
CCNA Routing and Switching - Routing and Switching Essentials
In 3 sentences or less, here is a summary of the document:
The document is a certificate of completion from the Cisco Networking Academy for a student named Alexander Shmid, which was signed by instructor Michael Keller on April 15, 2016, certifying that the student was able to proficiently understand and configure networking concepts like ACLs, DHCP, DNS, NAT, switching, routing protocols, and VLANs through the academy's course on routing and switching essentials.
Edward-Pacifico Ccna 1 Certificate
The student successfully completed the Cisco Networking Academy course at Capitol University in the Philippines. Over the course, the student demonstrated proficiency in analyzing network layer protocols and routing concepts, designing and applying subnet masks, explaining data link layer operations, and building a simple Ethernet network using routers and switches. The student also showed understanding of how data communication works, the role of protocols, and operations at various OSI model layers.
CiscoCertificate
During a Cisco Networking Academy course administered by instructor Paul Wang, student Julieta Ospina demonstrated proficiency in fundamental Ethernet concepts such as media and operations, building simple Ethernet networks using routers and switches, and using Cisco CLI commands to perform basic router and switch configurations. She also showed understanding of devices and services used to support data networks, the role of protocol layers, and addressing and naming schemes in IPv4 and IPv6 environments.
Cisco (CCNA Routing and Switching) Certificate
The document certifies that student Joseph SANCHEZ successfully completed the Cisco Networking Academy course, as verified by instructor Ciaran Bloomer on September 28, 2016, and demonstrated proficiency in topics including configuring and troubleshooting access control lists, DHCP, DNS, NAT, switching, routing protocols, and VLANs in a small network.
CiscoCertificate
In 3 sentences or less, here is a summary of the document:
The document certifies that Patrick Mustell completed the Cisco Networking Academy course at Nashville State Community College, where under instructor Kelvin Norman, Patrick demonstrated proficiency in configuring and troubleshooting access control lists, DHCP, DNS, NAT, basic switching, routing protocols, and VLANs in a small network.
Nicholas Shell.1848316.241192-signed
Nicholas Shell completed the Cisco Networking Academy course at Liberty University, administered by instructor Priscilla Lopez on May 18, 2015. Through the course, Nicholas was able to proficiently explain Ethernet concepts, build a simple network using routers and switches, use Cisco CLI commands to configure routers and switches, and utilize network utilities to analyze traffic.
CiscoCertificate2
The document is a certificate of completion from the Cisco Networking Academy for Muhammad Saqlain Khan from COMSATS Institute of Information Technology in Pakistan. The certificate, signed by instructor Muhammad Aamir on September 25, 2016, certifies that Khan proficiently understood and configured networking concepts like ACLs, DHCP, DNS, NAT, switching, routing protocols, and VLANs during his CCNA Routing and Switching: Routing and Switching Essentials course.
CCNA R&S Connecting Networks
The document is a certificate of completion from the Cisco Networking Academy course. It certifies that the student, Mohamed Yasser Mohamed Abdelhafez, successfully completed the course administered by instructor Mohamed Haggag at SCTechnology Training Academy in Egypt on September 6, 2016. It lists that the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, network monitoring tools, WAN technologies, VPNs, and different connection types.
cisco1_certi
The document is a certificate of completion from the Cisco Networking Academy for a student who was able to proficiently explain fundamental Ethernet concepts, build a simple Ethernet network using routers and switches, and use Cisco CLI commands to perform basic router and switch configurations. The student also demonstrated the ability to utilize common network utilities to verify small network operations and analyze data traffic.
CCNA Module 01
Muhammad Rizwan Amanat completed the Cisco Networking Academy CCNA Routing and Switching: Introduction to Networks course, as verified by instructor Fahad Wasim on March 11, 2016. During the course, Muhammad was able to proficiently explain Ethernet concepts, build simple networks using routers and switches, use Cisco CLI commands, and understand and describe devices, services, protocols, and addressing in data networks.
CCNA R&S
The document certifies that student Fahad Islam from Onondaga Community College successfully completed the Cisco Networking Academy course, as verified by instructor MaryPat Root on October 9, 2016, and demonstrated proficiency in topics including configuring and troubleshooting access control lists, DHCP, DNS, NAT, switching, routing protocols, and VLANs.
CiscoCertificate
The document is a certificate of completion from an instructor at Richland College in the United States, certifying that Timothy Carter successfully completed the Cisco Networking Academy course and was able to explain fundamental Ethernet concepts, build simple Ethernet networks, use Cisco CLI commands to configure routers and switches, and utilize network utilities to analyze traffic.
CCNA Routing and Switching - Routing and Switching Essentials
The student, Vladas Kabasinskas of Kaunas College in Lithuania, successfully completed the Cisco Networking Academy course on July 8, 2015 as certified by the instructor. Through the course, the student gained proficiency in configuring and troubleshooting access control lists, DHCP, DNS, NAT, switches, routing protocols, VLANs and basic network operations based on the CCNA Routing and Switching: Routing and Switching Essentials certificate.
CCNA Routing and Switching - Scaling Networks
Alexander Shmid completed the CCNA Routing and Switching: Scaling Networks course at Southern Alberta Institute of Technology, as certified by instructor Michael Keller on February 3, 2016. During the course, Alex demonstrated proficiency in configuring and troubleshooting routers and switches using protocols such as OSPF, EIGRP, RSTP, PVST+, EtherChannel, HSRP, and managing wireless clients and routers.
CiscoCertificate (2)
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course, as certified by the instructor. Through the course, the student gained proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, serial and broadband connections, and monitoring network operations using syslog, SNMP and NetFlow.
CCNARoutingandSwitchingConnectingDevices
The student Milan Fernando completed a Cisco Networking Academy course administered by instructor Kumudu Sanjeewa Gurugalgoda at the Sri Lanka Institute of Information Technology on October 23, 2016. During the course, Milan was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections, and monitor network operations using syslog, SNMP, and NetFlow.
More Related Content
What's hot
Connecting Networks
The student Theodoros Bakopoulos completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by their instructor. Through the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow, as well as different WAN technologies including serial and broadband connections and the operations and benefits of VPNs. The student received a Certificate of Course Completion signed by their instructor on May 29, 2015.
Completion of CCNA Transcript
Abdul Rahuman Kamardeen completed the Cisco CCNA Exploration: LAN Switching and Wireless course, earning a certificate of completion. The hands-on course prepared him for career opportunities in technology by teaching him skills like explaining switching concepts, configuring VLANs and trunking on Cisco switches, and identifying and resolving common network issues. Cisco's chairman congratulated Abdul and wished him continued success in technological literacy.
CiscoCertificate-2
Maria Slabkovskaya completed the Cisco Networking Academy course administered by instructor Sergiy Paliy at Kyiv National University of Construction and Architecture in Ukraine on January 10, 2017. During the course, Ms. Slabkovskaya demonstrated proficiency in explaining Ethernet concepts, building simple networks with routers and switches using Cisco CLI commands, and utilizing network utilities to analyze data traffic and verify small network operations.
Certifiate of Completion Cisco 1
The document is a certificate of completion from the Cisco Networking Academy for the student Ahmed Alrubaye. It certifies that he was able to proficiently explain fundamental Ethernet concepts, build simple Ethernet networks using routers and switches, use Cisco CLI commands to perform basic router and switch configurations, and utilize network utilities to verify small network operations and analyze data traffic for the CCNA Routing and Switching: Introduction to Networks course.
CCNA Routing and Switching - Connecting Networks
The student successfully completed the CCNA Routing and Switching: Connecting Networks course administered by the instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting tunneling, NAT, network monitoring using syslog, SNMP and NetFlow. The student also learned about WAN technologies, VPNs, serial and broadband connections, and describing different network architectures.
CiscoCertificate
The student completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course. During the course, the student proficiently learned to understand, configure, and troubleshoot tunneling, NAT, serial and broadband connections as well as monitor network operations using syslog, SNMP, and NetFlow. The student also understood network architectures and different WAN technologies including VPNs.
CCNA Routing and Switching - Routing and Switching Essentials
In 3 sentences or less, here is a summary of the document:
The document is a certificate of completion from the Cisco Networking Academy for a student named Alexander Shmid, which was signed by instructor Michael Keller on April 15, 2016, certifying that the student was able to proficiently understand and configure networking concepts like ACLs, DHCP, DNS, NAT, switching, routing protocols, and VLANs through the academy's course on routing and switching essentials.
Edward-Pacifico Ccna 1 Certificate
The student successfully completed the Cisco Networking Academy course at Capitol University in the Philippines. Over the course, the student demonstrated proficiency in analyzing network layer protocols and routing concepts, designing and applying subnet masks, explaining data link layer operations, and building a simple Ethernet network using routers and switches. The student also showed understanding of how data communication works, the role of protocols, and operations at various OSI model layers.
CiscoCertificate
During a Cisco Networking Academy course administered by instructor Paul Wang, student Julieta Ospina demonstrated proficiency in fundamental Ethernet concepts such as media and operations, building simple Ethernet networks using routers and switches, and using Cisco CLI commands to perform basic router and switch configurations. She also showed understanding of devices and services used to support data networks, the role of protocol layers, and addressing and naming schemes in IPv4 and IPv6 environments.
Cisco (CCNA Routing and Switching) Certificate
The document certifies that student Joseph SANCHEZ successfully completed the Cisco Networking Academy course, as verified by instructor Ciaran Bloomer on September 28, 2016, and demonstrated proficiency in topics including configuring and troubleshooting access control lists, DHCP, DNS, NAT, switching, routing protocols, and VLANs in a small network.
CiscoCertificate
In 3 sentences or less, here is a summary of the document:
The document certifies that Patrick Mustell completed the Cisco Networking Academy course at Nashville State Community College, where under instructor Kelvin Norman, Patrick demonstrated proficiency in configuring and troubleshooting access control lists, DHCP, DNS, NAT, basic switching, routing protocols, and VLANs in a small network.
Nicholas Shell.1848316.241192-signed
Nicholas Shell completed the Cisco Networking Academy course at Liberty University, administered by instructor Priscilla Lopez on May 18, 2015. Through the course, Nicholas was able to proficiently explain Ethernet concepts, build a simple network using routers and switches, use Cisco CLI commands to configure routers and switches, and utilize network utilities to analyze traffic.
CiscoCertificate2
The document is a certificate of completion from the Cisco Networking Academy for Muhammad Saqlain Khan from COMSATS Institute of Information Technology in Pakistan. The certificate, signed by instructor Muhammad Aamir on September 25, 2016, certifies that Khan proficiently understood and configured networking concepts like ACLs, DHCP, DNS, NAT, switching, routing protocols, and VLANs during his CCNA Routing and Switching: Routing and Switching Essentials course.
CCNA R&S Connecting Networks
The document is a certificate of completion from the Cisco Networking Academy course. It certifies that the student, Mohamed Yasser Mohamed Abdelhafez, successfully completed the course administered by instructor Mohamed Haggag at SCTechnology Training Academy in Egypt on September 6, 2016. It lists that the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, network monitoring tools, WAN technologies, VPNs, and different connection types.
cisco1_certi
The document is a certificate of completion from the Cisco Networking Academy for a student who was able to proficiently explain fundamental Ethernet concepts, build a simple Ethernet network using routers and switches, and use Cisco CLI commands to perform basic router and switch configurations. The student also demonstrated the ability to utilize common network utilities to verify small network operations and analyze data traffic.
CCNA Module 01
Muhammad Rizwan Amanat completed the Cisco Networking Academy CCNA Routing and Switching: Introduction to Networks course, as verified by instructor Fahad Wasim on March 11, 2016. During the course, Muhammad was able to proficiently explain Ethernet concepts, build simple networks using routers and switches, use Cisco CLI commands, and understand and describe devices, services, protocols, and addressing in data networks.
CCNA R&S
The document certifies that student Fahad Islam from Onondaga Community College successfully completed the Cisco Networking Academy course, as verified by instructor MaryPat Root on October 9, 2016, and demonstrated proficiency in topics including configuring and troubleshooting access control lists, DHCP, DNS, NAT, switching, routing protocols, and VLANs.
CiscoCertificate
The document is a certificate of completion from an instructor at Richland College in the United States, certifying that Timothy Carter successfully completed the Cisco Networking Academy course and was able to explain fundamental Ethernet concepts, build simple Ethernet networks, use Cisco CLI commands to configure routers and switches, and utilize network utilities to analyze traffic.
CCNA Routing and Switching - Routing and Switching Essentials
The student, Vladas Kabasinskas of Kaunas College in Lithuania, successfully completed the Cisco Networking Academy course on July 8, 2015 as certified by the instructor. Through the course, the student gained proficiency in configuring and troubleshooting access control lists, DHCP, DNS, NAT, switches, routing protocols, VLANs and basic network operations based on the CCNA Routing and Switching: Routing and Switching Essentials certificate.
CCNA Routing and Switching - Scaling Networks
Alexander Shmid completed the CCNA Routing and Switching: Scaling Networks course at Southern Alberta Institute of Technology, as certified by instructor Michael Keller on February 3, 2016. During the course, Alex demonstrated proficiency in configuring and troubleshooting routers and switches using protocols such as OSPF, EIGRP, RSTP, PVST+, EtherChannel, HSRP, and managing wireless clients and routers.
What's hot (20)
CCNA Routing and Switching - Routing and Switching Essentials
CCNA Routing and Switching - Routing and Switching Essentials
CCNA Routing and Switching - Routing and Switching Essentials
CCNA Routing and Switching - Routing and Switching Essentials
Similar to CCNA Routing and Switching - Connecting Networks
CiscoCertificate (2)
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course, as certified by the instructor. Through the course, the student gained proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, serial and broadband connections, and monitoring network operations using syslog, SNMP and NetFlow.
CCNARoutingandSwitchingConnectingDevices
The student Milan Fernando completed a Cisco Networking Academy course administered by instructor Kumudu Sanjeewa Gurugalgoda at the Sri Lanka Institute of Information Technology on October 23, 2016. During the course, Milan was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections, and monitor network operations using syslog, SNMP, and NetFlow.
20150512221130249VBEJJIMK
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course. They demonstrated proficiency in configuring and troubleshooting WAN technologies like VPNs, tunneling, NAT, and various connection types. The instructor certified that the student understood and could work with network monitoring tools and different network architectures.
CCNA Training Certificate (4)
The student proficiently understood, configured, and troubleshot various networking operations including tunneling, Network Address Translation, network monitoring using syslog, SNMP and NetFlow, different WAN technologies, virtual private networks and tunneling, and serial and broadband connections as part of the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by the instructor.
ccna4
Mohammad Atawneh completed the CCNA Routing and Switching: Connecting Networks course administered by his instructor at Palestine Polytechnic University. As demonstrated in the course, Mohammad was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, WANs, VPNs, serial and broadband connections as well as monitor network operations using syslog, SNMP, and NetFlow. He received a Certificate of Course Completion for his work in the Cisco Networking Academy course on October 8, 2015.
cisco-ccna
The student was able to proficiently explain fundamental Ethernet concepts, build a simple Ethernet network using routers and switches, and use Cisco CLI commands to perform basic configurations. They also utilized network utilities to verify small network operations and analyze data traffic. The certificate confirms the student understood devices, services, protocol layers, addressing, and naming schemes involved in data networks and completed the CCNA Routing and Switching: Introduction to Networks course.
ICND-IV
The student Mahesh Pavaskar completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course administered by instructor Siddhartha Rajbhatt at the Centre for Research & Industrial Staff Performance in India on June 12, 2016. According to the instructor's signature, during the course Pavaskar was able to proficiently understand, configure, and troubleshoot various networking technologies including tunneling, NAT, syslog, SNMP, NetFlow, WANs, VPNs, serial connections, and broadband connections.
Certification_CCNA 4
The student successfully completed the Cisco Networking Academy CCNA Routing and Switching: Connecting Networks course, as certified by their instructor. Over the course, the student gained proficiency in understanding, configuring, and troubleshooting various networking technologies including tunneling, NAT, WAN connections, VPNs, and network monitoring tools.
CCNARoutingandSwitchingIntroduction To Networks
During a Cisco Networking Academy course administered by instructor Kumudu Sanjeewa Gurugalgoda, student Milan Fernando was able to proficiently explain fundamental Ethernet concepts, build a simple Ethernet network using routers and switches, and use Cisco CLI commands to perform basic router and switch configurations.
CCNA Routing and Switching - Routing and Switching Essentials
The student completed the Cisco Networking Academy course administered by the instructor. Through the course, the student gained proficiency in understanding and configuring access control lists, DHCP, DNS, NAT, basic switching concepts, enhanced switching technologies, dynamic and distance vector routing protocols, and VLANs for IPv4 and IPv6 networks. The student received a certificate of completion for the CCNA Routing and Switching: Routing and Switching Essentials course.
CiscoCertificate
The document is a certificate of completion from the Cisco Networking Academy for a student who was able to proficiently explain Ethernet concepts, build simple Ethernet networks using routers and switches, use Cisco CLI commands to configure routers and switches, and utilize network utilities to verify small network operations and analyze data traffic. The student also understood and could describe devices, services, layers, addressing, and naming schemes used in data networks and the Internet.
CiscoCertificate
Ger Flynn completed the Cisco Networking Academy course at the Institute of Technology in Blanchardstown, Ireland. The course covered fundamental Ethernet concepts, building simple networks with routers and switches, using Cisco CLI commands, and understanding devices, services, protocols, addressing, and subnetting used in data networks. Tom Nolan, the instructor, verified that Ger Flynn proficiently learned these skills and concepts.
MAZIN_KHALID_SULIMAN_ELMUBARAK.certificates
The document is a certificate of completion from a Cisco Networking Academy course. It lists the various skills and topics the student was able to proficiently demonstrate, including explaining Ethernet concepts, building simple networks with routers and switches, configuring devices using CLI commands, understanding network protocols and addressing, configuring routing protocols and VLANs, monitoring networks, and connecting different network types. It certifies the student completed courses on introduction to networks, routing and switching essentials, scaling networks, and connecting networks.
newton ccna routing and switching essentials
During a Cisco Networking Academy course, the student was able to proficiently understand and configure access control lists, DHCP, DNS, NAT, switching concepts, routing protocols, and VLANs. The student received a certificate of completion for the CCNA Routing and Switching: Routing and Switching Essentials course from their instructors at the Federal Polytechnic Nekede Owerri Imo State Nigeria Academy on May 21, 2016.
Cisco Diploma
The student was able to proficiently explain fundamental Ethernet concepts, build a simple Ethernet network using routers and switches, and use CLI commands to perform basic router and switch configurations. They also utilized network utilities to verify small network operations and analyze data traffic. The certificate confirms the student understood and could describe devices, services, layers, and addressing schemes involved in data networks and the Internet.
CiscoCertificate
The student successfully completed the Cisco Networking Academy course administered by instructor Tharaka Guruge of the Vocational Training Authority of Sri Lanka on August 23, 2016. Over the course, the student learned to explain Ethernet concepts, build simple networks using routers and switches, use Cisco CLI commands, and utilize network utilities to analyze traffic. The student also understood network layers, addressing schemes, and could design subnets in IPv4 and IPv6 networks.
52396413.1.1.en_US.1810223.236049
The student Ahmed Younes successfully completed the Cisco Networking Academy course administered by instructor Tarek Elsabawy on September 20, 2015, as demonstrated by his proficiency in explaining Ethernet concepts, building simple networks using routers and switches, using Cisco CLI commands, and understanding devices, services, layers, addressing, and subnetting used in data networks.
Routing and Switching Essentials
The student, Theodoros Bakopoulos, successfully completed the Cisco Networking Academy course in Computer Practica, Greece on May 29, 2015. During the course, the student gained proficiency in understanding and configuring access control lists, DHCP, DNS, NAT, switching concepts, routing protocols, and VLANs as verified by the instructor's signature.
CiscoCertificate1
Muhammad Saqlain Khan completed the Cisco Networking Academy CCNA Routing and Switching: Introduction to Networks course at COMSATS Institute of Information Technology in Pakistan. As verified by instructor Muhammad Aamir on July 31, 2016, Khan demonstrated proficiency in explaining Ethernet concepts, building simple networks with routers and switches, using Cisco CLI commands, and utilizing network utilities to analyze traffic.
Similar to CCNA Routing and Switching - Connecting Networks (19)
CCNA Routing and Switching - Routing and Switching Essentials
CCNA Routing and Switching - Routing and Switching Essentials
CCNA Routing and Switching - Connecting Networks
- 1. During the Cisco Networking Academy® course, administered by the undersigned instructor, the student was able to proficiently: Alexander (Alex) Shmid Student Southern Alberta Institute of Technology Academy Name Canada Location Michael Keller Instructor Apr 15, 2016 Date Instructor Signature • Understand, configure, and troubleshoot tunneling operations • Understand, configure, and troubleshoot Network Address Translation (NAT) operations • Monitor and troubleshoot network operations using syslog, SNMP, and NetFlow • Understand and describe network architectures CCNA Routing and Switching: Connecting Networks Certificate of Course Completion • Understand and describe different WAN technologies and their benefits • Understand and describe the operations and benefits of virtual private networks (VPNs) and tunneling • Understand, configure, and troubleshoot serial connections • Understand, configure, and troubleshoot broadband connections