This document is a service manual that provides information for maintaining and repairing various models of telehandlers. It contains sections covering safety practices, general machine information and specifications, maintenance of the boom assembly, cab and covers, axles/drive shafts/wheels, engine/powertrain systems, hydraulic systems, and electrical systems. The manual provides component terminology, specifications, maintenance schedules, repair and replacement procedures, and troubleshooting information.
03. SOVIET CONTROL OF EASTERN EUROPE: Country by country takeoverGeorge Dumitrache
- After World War 2, the Soviet Union exerted control over Eastern Europe by installing communist governments in neighboring countries.
- The Soviets took over countries like Albania, East Germany, Romania, Bulgaria, Poland, Hungary, and Czechoslovakia from 1944-1948. In each country, communist parties drove out opposition and established totalitarian rule aligned with the Soviet Union.
- Stalin used both coercion and promises of aid to bring Eastern European countries under Soviet control. By 1948, the region was firmly within the Soviet sphere of influence, alarming Western powers like the United States and United Kingdom.
Jcb tm320 telescopic wheel loader service repair manual sn from 2508700 to 25...udfjjsjekkemm
This document provides instructions for disassembling and assembling the master clutch of a loader transmission. The summary steps for disassembly are:
1. Remove the clutch cover and discard the O-rings and oil seal.
2. Install locking plates and remove the clutch drum, pressure plate, and clutch plates.
3. Remove the plate carrier and thrust washers.
The summary steps for assembly are:
1. Install a new oil seal using a mandrel and lubricate and install new O-rings on the cover.
2. Assemble the clutch plates and carrier on a bench then insert into the housing using retainers.
3. Install the clutch drum, pressure plate,
Jcb jcb305, js305 excavator service repair manual (from 2452201 to 2452500)udfjjsjekkemm
This document provides service and repair information for JCB 305 and JS305 excavators. It contains instructions for maintenance, removal and installation of various engine components including the connecting rod, big-end bearing, piston and related parts. Detailed technical specifications are provided along with diagrams to identify parts. Proper safety procedures and use of special tools are emphasized.
Jcb jcb305, js305 excavator service repair manual (from 2452101 to 2452200)udfjjsjekkemm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator including the engine, fuel system, cooling system, driveline, hydraulics, and electrical system. The foreword stresses the importance of understanding the operator's manual before operating the machine and lists the contents sections of the service manual.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900650 to 1902499udfjjsjekkemm
The document is a service manual that provides information for servicing Liftall 1253/1202/1553/1554 machines. It contains sections covering general information, machine identification, load charts, torque specifications, service tools, and detailed sections for body/framework, electrics, hydraulics, and engine systems. The manual aims to support maintenance and repair of these machines.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900500 to 1900648udfjjsjekkemm
The document is a service manual that provides information for servicing Liftall 1253/1202/1553/1554 machines. It contains sections covering general information, machine identification, load charts, torque specifications, service tools, and detailed sections for body/framework, electrics, hydraulics, and engine systems. The manual aims to support maintenance and repair of these machines.
Jcb 535 v125 telescopic handler service repair manual sn from 2460601 onwardsudfjjsjekkemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, brake system, hydraulic system, electrical system, and other components. The section on engine valves provides technical specifications, component identification, removal and installation instructions, and inspection guidelines for the valve train components.
Jcb 533 105 telescopic handler service repair manual sn from 2902000 onwardsudfjjsjekkemm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
03. SOVIET CONTROL OF EASTERN EUROPE: Country by country takeoverGeorge Dumitrache
- After World War 2, the Soviet Union exerted control over Eastern Europe by installing communist governments in neighboring countries.
- The Soviets took over countries like Albania, East Germany, Romania, Bulgaria, Poland, Hungary, and Czechoslovakia from 1944-1948. In each country, communist parties drove out opposition and established totalitarian rule aligned with the Soviet Union.
- Stalin used both coercion and promises of aid to bring Eastern European countries under Soviet control. By 1948, the region was firmly within the Soviet sphere of influence, alarming Western powers like the United States and United Kingdom.
Jcb tm320 telescopic wheel loader service repair manual sn from 2508700 to 25...udfjjsjekkemm
This document provides instructions for disassembling and assembling the master clutch of a loader transmission. The summary steps for disassembly are:
1. Remove the clutch cover and discard the O-rings and oil seal.
2. Install locking plates and remove the clutch drum, pressure plate, and clutch plates.
3. Remove the plate carrier and thrust washers.
The summary steps for assembly are:
1. Install a new oil seal using a mandrel and lubricate and install new O-rings on the cover.
2. Assemble the clutch plates and carrier on a bench then insert into the housing using retainers.
3. Install the clutch drum, pressure plate,
Jcb jcb305, js305 excavator service repair manual (from 2452201 to 2452500)udfjjsjekkemm
This document provides service and repair information for JCB 305 and JS305 excavators. It contains instructions for maintenance, removal and installation of various engine components including the connecting rod, big-end bearing, piston and related parts. Detailed technical specifications are provided along with diagrams to identify parts. Proper safety procedures and use of special tools are emphasized.
Jcb jcb305, js305 excavator service repair manual (from 2452101 to 2452200)udfjjsjekkemm
This document is a service manual for an excavator model JCB305, JS305. It contains instructions for servicing and repairing components of the excavator including the engine, fuel system, cooling system, driveline, hydraulics, and electrical system. The foreword stresses the importance of understanding the operator's manual before operating the machine and lists the contents sections of the service manual.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900650 to 1902499udfjjsjekkemm
The document is a service manual that provides information for servicing Liftall 1253/1202/1553/1554 machines. It contains sections covering general information, machine identification, load charts, torque specifications, service tools, and detailed sections for body/framework, electrics, hydraulics, and engine systems. The manual aims to support maintenance and repair of these machines.
Jcb 1253, 1202, 1553, 1554 liftall service repair manual from 1900500 to 1900648udfjjsjekkemm
The document is a service manual that provides information for servicing Liftall 1253/1202/1553/1554 machines. It contains sections covering general information, machine identification, load charts, torque specifications, service tools, and detailed sections for body/framework, electrics, hydraulics, and engine systems. The manual aims to support maintenance and repair of these machines.
Jcb 535 v125 telescopic handler service repair manual sn from 2460601 onwardsudfjjsjekkemm
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, brake system, hydraulic system, electrical system, and other components. The section on engine valves provides technical specifications, component identification, removal and installation instructions, and inspection guidelines for the valve train components.
Jcb 533 105 telescopic handler service repair manual sn from 2902000 onwardsudfjjsjekkemm
This service manual provides information on servicing the Loadall rough terrain variable reach truck. It contains instructions that were originally provided by the manufacturer and covers systems like the engine, brakes, hydraulics, and electrical systems. The manual instructs technicians to study it before operating or maintaining the machine to prevent injury or death. It also contains sections on safety, maintenance procedures, technical specifications, and the removal and installation of components.
Jcb 531 70 tier 4 telescopic handler service repair manual sn from 2460601 on...udfjjsjekkemm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for inspecting and replacing fuel injectors and their seals.
Liebherr r964 c 1278 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 526 56 tier 4 telescopic handler service repair manual sn from 2460601 on...udfjjsjekkemm
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for servicing fuel injectors, including checking operation, removing and installing individual injectors, and removing and installing injector seals.
Jcb 507 42 telescopic handler service repair manual sn from 1402020 and upudfjjsjekkemm
This service manual provides instructions for servicing and repairing loadall trucks. It contains sections covering various vehicle systems. The section summarized details the process for removing and installing the front and rear cases of the semi-automatic gearbox. Key steps include separating the cases, removing internal components like clutches and shafts in the proper sequence, and reassembling the cases while ensuring correct clutch shaft end float is achieved. Special tools and consumables like threadlocker and gasket material are listed. End float measurements for the input and reverse shafts are to be taken and must fall within the specified range.
Liebherr r964 c 1145 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2093870 to 20...udfjjsjekkemm
This service manual provides instructions for servicing JCB machines 411HT, 413S, and 417HT. It contains sections on various machine systems including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, and electrical system. The section on the fuel and exhaust system includes subsections that provide introductions, component identifications, check procedures, and removal/installation steps for the inlet manifold, outlet manifold, and general exhaust system components. Safety precautions are outlined regarding working with hot or hazardous exhaust components.
Jcb 260 t skid steer loader service repair manual sn from 2478301 to 2478700udfjjsjekkemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Liebherr r964 c 1126 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 260 t skid steer loader service repair manual sn from 2476302 to 2477300udfjjsjekkemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 190 skid steer loader service repair manual (from 2473501 to 2473800)udfjjsjekkemm
This service manual provides information for servicing a JCB skid steer loader engine. It contains sections on safety, maintenance, troubleshooting and repair of the engine and its systems. The manual outlines the appropriate service procedures and safety precautions to follow when working on the engine.
Jcb 9 tst dumper service repair manual sn from hrs1645 to hrs3767udfjjsjekkemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 9 tst dumper service repair manual sn from hrp3406 to hrp3917udfjjsjekkemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Liebherr r960 demolition 1466 hydraulic excavator service repair manualudfjjsjekkemm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Daewoo doosan solar 220 lc v (dieu exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document provides a list of parts for a cylinder block assembly. It includes 31 key items numbered 1 through 31, with part numbers, descriptions, quantities, and replacement part information for each item. Replacement parts are indicated by letters after the part number. Serial number ranges are provided to indicate applicability of each part number.
Daewoo doosan solar 220 lc v (di exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document contains a parts list and diagrams for a cylinder block and associated components. It lists over 50 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The parts listed are primarily for the cylinder block, crankshaft, connecting rods, flywheel housing and timing gear case. Serial numbers and replacement part numbers are provided for most items.
Daewoo doosan solar 175 lc v (dieu exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document contains parts lists and diagrams for various components of a SOLAR 175LC-V engine, including:
- The cylinder block assembly with liner options and bearing caps.
- The timing gear case with cover and pins.
- The flywheel housing with mounting bolts and seals.
- The crankshaft assembly with main and connecting rod bearings, flywheel, and damper pulley.
- The cylinder head assembly with valve guides, seats, plugs, and mounting bolts.
- The valve train components including valves, springs, retainers, and rocker arm assembly.
Caterpillar cat th414 c telehandler operator and maintenance manualudfjjsjekkemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures and instructions contained within the manual. Unauthorized modifications could affect safety compliance. Contact JLG for any questions.
Jcb 531 70 tier 4 telescopic handler service repair manual sn from 2460601 on...udfjjsjekkemm
This document provides service and repair instructions for fuel injectors on JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for inspecting and replacing fuel injectors and their seals.
Liebherr r964 c 1278 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 526 56 tier 4 telescopic handler service repair manual sn from 2460601 on...udfjjsjekkemm
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It begins with an introduction to the injector components and operation. The main sections provide procedures for checking injector operation with diagnostic tools, removing and installing individual injectors, and removing and installing injector seals in the cylinder head. The summary highlights that the document contains procedures for servicing fuel injectors, including checking operation, removing and installing individual injectors, and removing and installing injector seals.
Jcb 507 42 telescopic handler service repair manual sn from 1402020 and upudfjjsjekkemm
This service manual provides instructions for servicing and repairing loadall trucks. It contains sections covering various vehicle systems. The section summarized details the process for removing and installing the front and rear cases of the semi-automatic gearbox. Key steps include separating the cases, removing internal components like clutches and shafts in the proper sequence, and reassembling the cases while ensuring correct clutch shaft end float is achieved. Special tools and consumables like threadlocker and gasket material are listed. End float measurements for the input and reverse shafts are to be taken and must fall within the specified range.
Liebherr r964 c 1145 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2093870 to 20...udfjjsjekkemm
This service manual provides instructions for servicing JCB machines 411HT, 413S, and 417HT. It contains sections on various machine systems including the engine, fuel and exhaust systems, cooling system, brake system, hydraulic system, and electrical system. The section on the fuel and exhaust system includes subsections that provide introductions, component identifications, check procedures, and removal/installation steps for the inlet manifold, outlet manifold, and general exhaust system components. Safety precautions are outlined regarding working with hot or hazardous exhaust components.
Jcb 260 t skid steer loader service repair manual sn from 2478301 to 2478700udfjjsjekkemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Liebherr r964 c 1126 hydraulic excavator service repair manualudfjjsjekkemm
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb 260 t skid steer loader service repair manual sn from 2476302 to 2477300udfjjsjekkemm
This service manual provides instructions for servicing skid steer loaders and their engines. It details removing and installing the engine bedplate, which acts as the main strength component and maintains alignment of internal engine parts. The multi-step procedure requires cleaning parts, applying sealant, installing bearing shells and bolts, and torquing bolts to specified values. Special tools like templates and torque wrenches are needed to correctly complete the process.
Jcb 190 skid steer loader service repair manual (from 2473501 to 2473800)udfjjsjekkemm
This service manual provides information for servicing a JCB skid steer loader engine. It contains sections on safety, maintenance, troubleshooting and repair of the engine and its systems. The manual outlines the appropriate service procedures and safety precautions to follow when working on the engine.
Jcb 9 tst dumper service repair manual sn from hrs1645 to hrs3767udfjjsjekkemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 9 tst dumper service repair manual sn from hrp3406 to hrp3917udfjjsjekkemm
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Liebherr r960 demolition 1466 hydraulic excavator service repair manualudfjjsjekkemm
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Jcb 4 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Jcb 3 cx backhoe loader service repair manual sn from 2442701 — 2451000udfjjsjekkemm
This service manual provides instructions for servicing backhoe loaders models 3CX, 4CX, and 5CX. It contains sections covering the entire machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, electrical system, and other components. The document provides detailed procedures, diagrams, and specifications for maintenance, repair, and removal/installation of parts. Safety warnings are included throughout advising technicians to read and understand instructions before working on the machine.
Daewoo doosan solar 220 lc v (dieu exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document provides a list of parts for a cylinder block assembly. It includes 31 key items numbered 1 through 31, with part numbers, descriptions, quantities, and replacement part information for each item. Replacement parts are indicated by letters after the part number. Serial number ranges are provided to indicate applicability of each part number.
Daewoo doosan solar 220 lc v (di exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document contains a parts list and diagrams for a cylinder block and associated components. It lists over 50 individual part numbers, descriptions, quantities, serial numbers and replacement part information. The parts listed are primarily for the cylinder block, crankshaft, connecting rods, flywheel housing and timing gear case. Serial numbers and replacement part numbers are provided for most items.
Daewoo doosan solar 175 lc v (dieu exp) crawler excavator parts catalogue manualudfjjsjekkemm
This document contains parts lists and diagrams for various components of a SOLAR 175LC-V engine, including:
- The cylinder block assembly with liner options and bearing caps.
- The timing gear case with cover and pins.
- The flywheel housing with mounting bolts and seals.
- The crankshaft assembly with main and connecting rod bearings, flywheel, and damper pulley.
- The cylinder head assembly with valve guides, seats, plugs, and mounting bolts.
- The valve train components including valves, springs, retainers, and rocker arm assembly.
Caterpillar cat th414 c telehandler operator and maintenance manualudfjjsjekkemm
This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and general safety practices. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety procedures and instructions contained within the manual. Unauthorized modifications could affect safety compliance. Contact JLG for any questions.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
6. Safety Practices
1-2 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
1.1 INTRODUCTION
This service manual provides general directions for
accomplishing service and repair procedures. Following
the procedures in this manual will help assure safety and
equipment reliability.
Read, understand and follow the information in this
manual, and obey all locally approved safety practices,
procedures, rules, codes, regulations and laws.
These instructions cannot cover all details or variations in
the equipment, procedures, or processes described, nor
provide directions for meeting every possible contingency
during operation, maintenance, or testing. When additional
information is desired consult the local Caterpillar dealer.
Many factors contribute to unsafe conditions: carelessness,
fatigue, overload, inattentiveness, unfamiliarity, even
drugs and alcohol, among others. For optimal safety,
encourage everyone to think, and to act, safely.
Appropriate service methods and proper repair
procedures are essential for the safety of the individual
doing the work, for the safety of the operator, and for the
safe, reliable operation of the machine. All references to
the right side, left side, front and rear are given from the
operator seat looking in a forward direction.
Supplementary information is available from the
manufacturer in the form of Service Bulletins, Service
Campaigns, Service Training Schools, the service
website, other literature, and through updates to the
manual itself.
1.2 DISCLAIMER
All information in this manual is based on the latest
product information available at the time of publication.
The manufacturer reserves the right to make changes
and improvements to its products, and to discontinue the
manufacture of any product, at its discretion at any time
without public notice or obligation.
1.3 OPERATION & MAINTENANCE
MANUAL
The mechanic must not operate the machine until the
Operation & Maintenance Manual has been read and
understood, training has been accomplished and
operation of the machine has been completed under the
supervision of an experienced and qualified operator.
An Operation & Maintenance Manual is supplied with
each machine and must be kept in the manual holder
located in the cab. In the event that the Operation &
Maintenance Manual is missing, consult the local
Caterpillar dealer before proceeding.
1.4 DO NOT OPERATE TAGS
Place Do Not Operate Tags on the ignition key switch and
the steering wheel before attempting to perform any
service or maintenance. Remove key and disconnect
battery leads.
1.5 SAFETY INFORMATION
To avoid possible death or injury, carefully read,
understand and comply with all safety messages.
In the event of an accident, know where to obtain medical
assistance and how to use a first aid kit and fire
extinguisher/fire suppression system. Keep emergency
telephone numbers (fire department, ambulance, rescue
squad/paramedics, police department, etc.) nearby. If
working alone, check with another person routinely to
help assure personal safety.
1.6 SAFETY ALERT SYSTEM AND
SIGNAL WORDS
DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
DANGER
WARNING
CAUTION
7. 1-3
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
Safety Practices
1.7 SAFETY INSTRUCTIONS
Following are general safety statements to consider before
performing maintenance procedures on the telehandler.
Additional statements related to specific tasks and
procedures are located throughout this manual and are
listed prior to any work instructions to provide safety
information before the potential of a hazard occurs.
For all safety messages, carefully read, understand and
follow the instructions before proceeding.
1.7.1 Personal Hazards
PERSONAL SAFETY GEAR: Wear all the protective
clothing and personal safety gear necessary to perform
the job safely. This might include heavy gloves, safety
glasses or goggles, filter mask or respirator, safety shoes
or a hard hat.
LIFTING: NEVER lift a heavy object without the help of at
least one assistant or a suitable sling and hoist.
1.7.2 Equipment Hazards
LIFTING OF EQUIPMENT: Before using any lifting
equipment (chains, slings, brackets, hooks, etc.), verify
that it is of the proper capacity, in good working order, and
is properly attached.
NEVER stand or otherwise become positioned under a
suspended load or under raised equipment. The load or
equipment could fall or tip.
DO NOT use a hoist, jack or jack stands only to support
equipment. Always support equipment with the proper
capacity blocks or stands properly rated for the load.
HAND TOOLS: Always use the proper tool for the job;
keep tools clean and in good working order, and use
special service tools only as recommended.
1.7.3 General Hazards
SOLVENTS: Only use approved solvents that are known
to be safe for use.
HOUSEKEEPING: Keep the work area and operator cab
clean, and remove all hazards (debris, oil, tools, etc.).
FIRST AID: Immediately clean, dress and report all injuries
(cuts, abrasions, burns, etc.), no matter how minor the
injury may seem. Know the location of a First Aid Kit, and
know how to use it.
CLEANLINESS: Wear eye protection, and clean all
components with a high pressure or steam cleaner before
attempting service.
When removing hydraulic components, plug hose ends
and connections to prevent excess leakage and
contamination. Place a suitable catch basin beneath the
machine to capture fluid run off.
It is good practice to avoid pressure-washing electrical/
electronic components. In the event pressure-washing
the machine is needed, ensure the machine is shut down
before pressure-washing. Should pressure-washing be
utilized to wash areas containing electrical/electronic
components, JLG recommends a maximum pressure of
52 bar (750 psi) at a minimum distance of 30,5 cm (12 in)
away from these components. If electrical/electronic
components are sprayed, spraying must not be direct and
for brief time periods to avoid heavy saturation,
Check and obey all Federal, State and/or Local
regulations regarding waste storage, disposal and
recycling.
8. Safety Practices
1-4 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
1.7.4 Operational Hazards
ENGINE: Stop the engine before performing any service
unless specifically instructed otherwise.
VENTILATION: Avoid prolonged engine operation in
enclosed areas without adequate ventilation.
SOFT SURFACES AND SLOPES: NEVER work on a
machine that is parked on a soft surface or slope. The
machine must be on a hard level surface, with the wheels
blocked before performing any service.
FLUID TEMPERATURE: NEVER work on a machine
when the engine, cooling or hydraulic systems are hot.
Hot components and fluids can cause severe burns.
Allow systems to cool before proceeding.
FLUID PRESSURE: Before loosening any hydraulic or
diesel fuel component, hose or tube, turn the engine
OFF. Wear heavy, protective gloves and eye protection.
NEVER check for leaks using any part of your body; use
a piece of cardboard or wood instead. If injured, seek
medical attention immediately. Diesel fluid leaking under
pressure can explode. Hydraulic fluid and diesel fuel
leaking under pressure can penetrate the skin, cause
infection, gangrene and other serious personal injury.
Refer to the engine manufacturer’s manual for specific
details concerning the fuel system.
Engine fuel lines are pressurized. DO NOT attempt
repairs unless specific training has been completed.
Refer to the engine manufacturers’ manual for specific
details concerning the fuel system.
Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen parts and
allow release of residual pressure before removing any
part or component. Before starting the engine or applying
pressure, use components, parts, hoses and pipes that
are in good condition, connected properly and are
tightened to the proper torque. Capture fluid in an
appropriate container and dispose of in accordance with
prevailing environmental regulations.
COOLANT SYSTEM CAP: The cooling system is under
pressure, and escaping coolant can cause severe burns
and eye injury. To prevent personal injury, NEVER
remove the coolant system cap while the cooling system
is hot. Wear safety glasses. Turn the coolant system cap
to the first stop and allow pressure to escape before
removing the cap completely. Failure to follow the safety
practices could result in death or serious injury.
FLUID FLAMABILTITY: DO NOT service the fuel or
hydraulic systems near an open flame, sparks or smoking
materials.
Properly disconnect battery(s) prior to servicing the fuel
or hydraulic systems.
NEVER drain or store fluids in an open container. Engine
fuel and hydraulic fluid are flammable and can cause a
fire and/or explosion.
DO NOT mix gasoline or alcohol with diesel fuel. The
mixture can cause an explosion.
PRESSURE TESTING: When conducting any test, only
use test equipment that is correctly calibrated and in good
condition. Use the correct equipment in the proper
manner, and make changes or repairs as indicated by the
test procedure to achieve the desired result.
LEAVING MACHINE: Lower the forks or attachment to
the ground before leaving the machine.
TIRES: Always keep tires inflated to the proper pressure
to help prevent tipover. DO NOT over inflate tires.
NEVER use mismatched tire types, sizes or ply ratings.
Always use matched sets according to machine
specifications.
MAJOR COMPONENTS: Never alter, remove, or
substitute any items such as counterweights, tires,
batteries or other items that may reduce or affect the
overall weight or stability of the machine.
BATTERY: DO NOT charge a frozen battery.Charging a
frozen battery may cause it to explode. Allow the battery
to thaw before jump starting or connecting a battery
charger.
1.8 SAFETY DECALS
Check that all safety decals are present and readable on
the machine. Refer to the Operation & Maintenance
Manual supplied with machine for information.
10. General Information and Specifications
2-2 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.1 REPLACEMENT PARTS AND
WARRANTY INFORMATION
Before ordering parts or initiating service inquiries, make
note of the machine serial number. The machine serial
number plate (1) is located on the frame behind the right
front tire.
Note: The replacement of any part on this machine with
any other than factory authorized replacement parts can
adversely affect the performance, durability, or safety of
the machine, and will void the warranty. JLG disclaims
liability for any claims or damages, whether regarding
property damage, personal injury or death arising out of
the use of unauthorized replacement parts.
A warranty registration form must be filled out by the local
Caterpillar dealer.
Registration activates the warranty period and helps to
assure that warranty claims are promptly processed to
guarantee full warranty service.
2.2 THREAD LOCKING COMPOUND
Loctite®
243TM
can be substituted in place of Loctite®
242TM
.
Vibra-TITETM
122 can be substituted in place of Vibra-
TITETM
121.
MZ6510
1
Loctite® ND Industries Description
242TM Vibra-TITETM121 Medium Strength (Blue)
243TM Vibra-TITETM122 Medium Strength (Blue)
271TM Vibra-TITETM140 High Strength (Red)
262TM Vibra-TITETM131 Medium - High Strength (Red)
17. 2-9
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.2 Metric Fastener Torque Chart
Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*
CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM)
Torque (Lube)
Torque
(Loctite® 262TM or
271TM
or Vibra-TITETM
131)
Torque
(Loctite® 242TM
or
271TM or Vibra-TITETM
111
or 141)
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 2.19 1.3 1.0 1.2 1.4
3.5 0.6 6.78 2.95 2.1 1.6 1.9 2.3
4 0.7 8.78 3.82 3.1 2.3 2.8 3.4
5 0.8 14.20 6.18 6.2 4.6 5.6 6.8
6 1 20.10 8.74 11 7.9 9.4 12
7 1 28.90 12.6 18 13 16 19
8 1.25 36.60 15.9 26 19 23 28
10 1.5 58.00 25.2 50 38 45 55
12 1.75 84.30 36.7 88 66 79 97
14 2 115 50.0 140 105 126 154
16 2 157 68.3 219 164 197 241
18 2.5 192 83.5 301 226 271 331
20 2.5 245 106.5 426 320 383 469
22 2.5 303 132.0 581 436 523 639
24 3 353 153.5 737 553 663 811
27 3 459 199.5 1080 810 970 1130
30 3.5 561 244.0 1460 1100 1320 1530
33 3.5 694 302.0 1990 1490 1790 2090
36 4 817 355.5 2560 1920 2300 2690
42 4.5 1120 487.0 4090 3070 3680 4290
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
18. General Information and Specifications
2-10 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Zinc Yellow Chromate Fasteners (Ref 4150707)*
CLASS 10.9 METRIC (HEX HEAD) BOLTS,
CLASS 10 METRIC NUTS CLASS 12.9 SOCKET HEAD CAP SCREWS M3 - M5*
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM)
K=0.20
Torque
(Lube or Loctite®
242TM
or 271TM
or
Vibra-TITETM 111 or 140)
K=0.18
Torque
(Loctite® 262TM
or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 3.13
3.5 0.6 6.78 4.22
4 0.7 8.78 5.47
5 0.8 14.20 8.85
6 1 20.10 12.5
7 1 28.90 18.0 25 23 19
8 1.25 36.60 22.8 37 33 27
10 1.5 58.00 36.1 70 65 55
12 1.75 84.30 52.5 125 115 95
14 2 115 71.6 200 180 150
16 2 157 97.8 315 280 235
18 2.5 192 119.5 430 385 325
20 2.5 245 152.5 610 550 460
22 2.5 303 189.0 830 750 625
24 3 353 222.0 1065 960 800
27 3 459 286.0 1545 1390 1160
30 3.5 561 349.5 2095 1885 1575
33 3.5 694 432.5 2855 2570 2140
36 4 817 509.0 3665 3300 2750
42 4.5 1120 698.0 5865 5275 4395
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 2-11
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Magni Coated Fasteners (Ref 4150701)*
CLASS 8.8 METRIC (HEX/SOCKET HEAD) BOLTS CLASS 8 METRIC NUTS
Size Pitch
Tensile Stress
Area
Clamp Load
See Note 4
Torque
(Dry or Loctite® 263TM
)
K=0.17
Torque
(Lube or Loctite® 242TM
or
271TM
or
Vibra-TITETM 111 or 140)
K=0.16
Torque
(Loctite® 262TM
or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 2.19 1.1 1.1 1.0
3.5 0.6 6.78 2.95 1.8 1.7 1.5
4 0.7 8.78 3.82 2.6 2.4 2.3
5 0.8 14.20 6.18 5.3 4.9 4.6
6 1 20.10 8.74 9 8.4 7.9
7 1 28.90 12.6 15 14 13
8 1.25 36.60 15.9 22 20 19
10 1.5 58.00 25.2 43 40 38
12 1.75 84.30 36.7 75 70 66
14 2 115 50.0 119 110 105
16 2 157 68.3 186 175 165
18 2.5 192 83.5 256 240 225
20 2.5 245 106.5 362 340 320
22 2.5 303 132.0 494 465 435
24 3 353 153.5 627 590 555
27 3 459 199.5 916 860 810
30 3.5 561 244.0 1245 1170 1100
33 3.5 694 302.0 1694 1595 1495
36 4 817 355.5 2176 2050 1920
42 4.5 1120 487.0 3477 3275 3070
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
21. General Information and Specifications
2-12 TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
2.3.2 Metric Fastener Torque Chart (Continued)
Values for Magni Coated Fasteners (Ref 4150701)*
CLASS 10.9 METRIC (HEX HEAD) BOLTS CLASS 10 METRIC NUTS,
CLASS 12.9 SOCKET HEAD CAP SCREWS M6 AND ABOVE*
Size Pitch
Tensile Stress
Area
Clamp Load See
Note 4
Torque
(Dry or Loctite® 263TM
)
K=0.17
Torque
(Lube or Loctite®
242TM
or 271TM
or
Vibra-TITETM
111 or 140)
K=0.18
Torque
(Loctite® 262TM or
Vibra-TITETM
131)
K=0.15
Sq mm KN [N.m] [N.m] [N.m]
3 0.5 5.03 3.13
3.5 0.6 6.78 4.22
4 0.7 8.78 5.47
5 0.8 14.20 8.85
6 1 20.10 12.5 13 12 11
7 1 28.90 18.0 21 20 19
8 1.25 36.60 22.8 31 29 27
10 1.5 58.00 36.1 61 58 55
12 1.75 84.30 52.5 105 100 95
14 2 115 71.6 170 160 150
16 2 157 97.8 265 250 235
18 2.5 192 119.5 365 345 325
20 2.5 245 152.5 520 490 460
22 2.5 303 189.0 705 665 625
24 3 353 222.0 905 850 800
27 3 459 286.0 1315 1235 1160
30 3.5 561 349.5 1780 1680 1575
33 3.5 694 432.5 2425 2285 2140
36 4 817 509.0 3115 2930 2750
42 4.5 1120 698.0 4985 4690 4395
NOTES: 1. THESE TORQUE VALUES DO NOT APPLY TO CADMIUM PLATED FASTENERS 5000059K
2. ALL TORQUE VALUES ARE STATIC TORQUE MEASURED PER STANDARD AUDIT METHODS TOLERANCE = ±10%
3. * ASSEMBLY USES HARDENED WASHER
4. CLAMP LOAD LISTED FOR SHCS IS SAME AS GRADE 8 OR CLASS 10.9 AND DOES NOT REPRESENT FULL STRENGTH CAPABILITY OF SHCS.
IF HIGHER LOAD IS REQUIRED, ADDITIONAL TESTING IS REQUIRED.
22. 2-13
TH336C, TH337C, TH406C, TH407C, TH414C, TH514C, TH417C
General Information and Specifications
2.3.3 Hydraulic Hose Torque Chart
Note: By definition the “Flats Method“ will contain some
variance. Use the “Flats Method” only when accessibility
with a torque wrench is not possible.
Torque Wrench:
1. Identify the appropriate application and refer to the
above chart for the correct torque value.
2. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).
3. Use the double wrench method while tightening to
avoid hose twist.
4. Torque wrench must be held at the center of the grip.
Apply constant force until it clicks.
5. After the connection has been properly tightened,
mark a straight line across the connecting parts
indicating that the connection has been properly
tightened.
Flats Method:
1. If equipped, lubricate o-ring with hydraulic oil. Hand
tighten the swivel nut until no lateral movement of
the swivel nut can be detected. Average hand torque
is 4 Nm (3 lb-ft).
2. Mark a dot on one of the swivel nut flats and another
dot in line on the hex of the adapter it’s connecting
to.
3. Use the double wrench method while tightening to
avoid hose twist.
4. After the connection has been properly tightened,
mark a straight line across the connecting parts, not
covering the dots indicating that the connection has
been properly tightened.
O-Ring Face Seal & JIC Torque Chart
Size ORFS JIC Flats Method
4
18 Nm
(13 lb-ft)
18 Nm
(13 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
6
31 Nm
(23 lb-ft)
31 Nm
(23 lb-ft)
25,4 to 38,1 mm
1 to 1.5 in.
8
54 Nm
(40 lb-ft)
54 Nm
(40 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
10
81 Nm
(60 lb-ft)
81 Nm
(60 lb-ft)
38,1 to 44,5 mm
1.5 to 1.75 in.
12
100 Nm
(136 lb-ft)
115 Nm
(85 lb-ft)
25,4 to 38,1 mm
1 to 1.5 in.
16
156 Nm
(115 lb-ft)
156 Nm
(115 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
20
230 Nm
(170 lb-ft)
230 Nm
(170 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
24
271 Nm
(200 lb-ft)
271 Nm
(200 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.
32 N/A
366 Nm
(270 lb-ft)
19,0 to 25,4 mm
0.75 to 1.0 in.