This document provides an operation and maintenance manual for several models of JLG telehandlers. It contains important safety information and instructions for pre-operation inspection, operation of controls and indicators, and maintenance procedures. The manual should be kept with the machine at all times. Operators must be trained and qualified, and follow all safety guidelines and procedures contained in this manual. Unauthorized modifications could affect safety compliance. Contact JLG for any questions.
1981 johnson evinrude outboard 4.5 hp service repair manualfjsjefskekfmme
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
New holland cx6080 tier 3 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering systems, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, feeding, threshing, separating, cleaning, storing, unloading and other crop processing functions. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's various components and systems.
New holland cr9.90 combine harvesters service repair manualfjsjefskekfmme
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr9090 elevation combine harvesters service repair manualfjsjefskekfmme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjsjefskekfmme
This service manual document provides instructions for removing and installing various components of a Caterpillar 903D compact wheel loader, including:
1. The steering frame lock to secure the machine frames before working on the loader.
2. The hydraulic tank which requires draining the tank, removing hoses/fittings, and lifting the tank off with a lifting device.
3. The joystick control and mounting located in the cab, which involves removing covers and disconnecting cables and harnesses.
4. The steering metering pump, which requires releasing hydraulic pressure, disconnecting hoses, and removing bolts to access the pump.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...fjsjefskekfmme
This document provides instructions for removing and installing an engine oil cooler and disassembling and assembling an engine oil pump on an excavator model EL240B. The oil cooler removal procedure involves removing the oil cooler and gasket. The oil pump disassembly procedure involves using tools to remove various components like gears, shafts, springs and plungers from the oil pump body and housing. Precautions are provided to keep parts clean and contain fluids during the repair work.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses and tubes and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses, brackets and bolts and installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses and installation in reverse order.
5) Electronic unit injectors, involving removal of clips
1981 johnson evinrude outboard 4.5 hp service repair manualfjsjefskekfmme
This short document repeats itself and encourages the reader to click a link for more information. It thanks the reader twice for reading and directs them to click a link in order to obtain additional information on an unspecified topic.
New holland cx6080 tier 3 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering systems, frames, cabs, user platforms, environmental controls, lifting and leveling systems, and crop processing functions. Each section contains technical data, descriptions of functionality, diagnostic information, and service procedures for the machine's components and systems.
New holland cx6080 cx6090 tier 4 combine harvester service repair manualfjsjefskekfmme
This document is a service manual for CX5000 and CX6000 series machines. It contains sections covering the machine's hydraulic, pneumatic, electrical and electronic systems, engines, transmissions, axles, brakes, steering, frames, cabs, user platforms, environmental controls, frame positioning, tool positioning, lifting, leveling, feeding, threshing, separating, cleaning, storing, unloading and other crop processing functions. Each section contains technical data, functional descriptions, diagnostics and service instructions for the machine's various components and systems.
New holland cr9.90 combine harvesters service repair manualfjsjefskekfmme
This document is a service manual for various combine harvester models from CNH Industrial. It contains over 20 sections that provide information on systems of the combines like the engine, transmission, axles, brakes, hydraulics, steering, tracks, electrical systems, and more. Each section includes subsections that go into further detail on specific components. The manual also includes a table linking product models to their corresponding engine.
New holland cr9090 elevation combine harvesters service repair manualfjsjefskekfmme
This document is a service manual that provides instructions and specifications for servicing various components of agricultural equipment, including the distribution systems, power systems, engine, transmission, axles, steering, braking, body, operator controls, crop processing, protection systems, and other subsystems. It outlines proper procedures for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during welding.
Caterpillar cat 903 d compact wheel loader (prefix mzy) service repair manual...fjsjefskekfmme
This service manual document provides instructions for removing and installing various components of a Caterpillar 903D compact wheel loader, including:
1. The steering frame lock to secure the machine frames before working on the loader.
2. The hydraulic tank which requires draining the tank, removing hoses/fittings, and lifting the tank off with a lifting device.
3. The joystick control and mounting located in the cab, which involves removing covers and disconnecting cables and harnesses.
4. The steering metering pump, which requires releasing hydraulic pressure, disconnecting hoses, and removing bolts to access the pump.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...fjsjefskekfmme
This document provides instructions for removing and installing an engine oil cooler and disassembling and assembling an engine oil pump on an excavator model EL240B. The oil cooler removal procedure involves removing the oil cooler and gasket. The oil pump disassembly procedure involves using tools to remove various components like gears, shafts, springs and plungers from the oil pump body and housing. Precautions are provided to keep parts clean and contain fluids during the repair work.
The document provides instructions for removing and installing various components of a Caterpillar C2.4 Tier 4 Final engine, including:
1) The fuel manifold, requiring removal of bolts and lines and installation in reverse order.
2) Fuel injection lines, involving removal of clamps, hoses and tubes and installation in reverse order.
3) The exhaust gas recirculation cooler, requiring draining of coolant and removal of hoses, brackets and bolts and installation in reverse order.
4) The fuel injection pump, calling for removal of nuts, bolts and hoses and installation in reverse order.
5) Electronic unit injectors, involving removal of clips
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjsjefskekfmme
This document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar EL200B excavator. The removal procedure involves removing the engine oil pan and then the oil pump. The disassembly procedure details removing various components of the oil pump including gears, shafts, and springs. The assembly procedure specifies lubricating parts and installing components in reverse order of removal. Finally, the installation procedure indicates ensuring clean mounting surfaces and installing the oil pump.
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...fjsjefskekfmme
This document provides instructions for removing the automatic timing advance from an E300B excavator engine. It describes:
1) Using various tools to turn the crankshaft and camshaft to specific positions to aid in removal.
2) Loosening a bolt to separate the automatic timing advance gear from the fuel pump camshaft.
3) Removing the automatic timing advance unit from the engine.
Proper positioning of engine components and use of the specified tools is necessary for safe and effective removal of the automatic timing advance.
Caterpillar cat 903 c compact wheel loader (prefix w6t) service repair manual...fjsjefskekfmme
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft assembly. Specific steps include removing retaining rings, sleeves, and press-fitting bearings. Torque specifications and notices about cleanliness and fluid containment are provided.
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...fjsjefskekfmme
This document provides instructions for removing and installing the front cover on an excavator engine. It begins by noting the tools needed and safety precautions. The removal procedure instructs to remove the bolts from the front cover and remove the cover and gasket. The installation procedure instructs to install a new gasket on the cover and then install the gasket and cover on the front of the engine.
Caterpillar cat 903 c compact wheel loader (prefix mw4) service repair manual...fjsjefskekfmme
This document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader powered by a C2.4 engine. It includes procedures for removing and installing fuel injection lines and nozzles, as well as disassembling, assembling, removing and installing the governor and camshaft. Detailed illustrations accompany each step-by-step procedure to ensure correct part placement and tool usage. Proper cleanup and containment of fluids is emphasized throughout.
Caterpillar cat e240 b excavator (prefix 8sf) service repair manual (8sf00001...fjsjefskekfmme
This document provides instructions for removing and installing the fuel transfer pump on an excavator model E240B powered by a 3116 engine. The removal procedure involves holding the spring loaded cover in place and removing bolts to access internal components. Components like the filter screen, seals, springs and fittings are then removed. The installation procedure is not described but presumably involves reversing the removal steps. Precautions are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing an implement pump on a 527 track skidder. It outlines the disassembly and assembly procedures in detail with illustrations. Safety notices are included to release pressure from the hydraulic system before removal and to relieve spring tension carefully during disassembly. The multi-page document thoroughly explains each step to disassemble and reassemble the implement pump.
This document provides instructions for removing and installing various components on a Caterpillar 527 Track Skidder, including the turbocharger, water temperature regulator, and radiator. The removal and installation procedures are described in detail in a step-by-step format and include illustrations. Safety and contamination prevention notices are also provided throughout the document.
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...fjsjefskekfmme
This document provides instructions for disassembling and assembling the travel drives of an E120B excavator. It describes removing and disassembling the travel drive and travel motor components. It then describes cleaning and inspecting the parts and reassembling the travel drive, which involves determining shim sizes, installing seals and gears, and torquing bolts to the specified values. The goal is to properly disassemble, clean, measure, and reassemble the travel drive components.
This document provides instructions for removing and installing the fuel priming pump and fuel filter base on a Caterpillar 527 Track Skidder with a 3304 engine. It describes:
- Removing the fuel priming pump by turning off the fuel supply, removing bolts/washers, disconnecting tubes, and removing the pump and gasket.
- Installing the fuel priming pump by installing the gasket, bolts/washers, connecting tubes, and turning on the fuel supply.
- Removing the fuel filter base by removing the fuel filter, disconnecting fuel lines, and removing bolts/washers/base/gasket.
- Installing the fuel filter base by installing the
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...fjsjefskekfmme
The document is a service manual that provides specifications and operating instructions for the travel drive and motor of an E70B excavator. It describes the main components of the travel drive and motor system, including the axial plunger motor, counter-balance valve, parking brake, and reduction gears. It explains how each component functions and interacts with the others to convert hydraulic pressure into rotational force to power the tracks and control functions like braking and reversing.
This document provides instructions for connecting and disconnecting tracks on a 517 Track Skidder. It describes 13 steps for the connection procedure, including using tools to lift the machine, engage the track bushings with the sprocket segments, and tighten the master link. It also provides procedures for removing and installing sprocket segments, disassembling and assembling track rollers, and installing Duo-Cone seals.
This document provides instructions for servicing the automatic timing advance on a 517 TRACK SKIDDER model powered by a 3304 engine. It describes removing the fuel injection pump housing and governor, disassembling the housing, and reassembling the housing. The procedures involve using various tools to install and remove parts like bearings, lifters, and seals. Technicians are advised to keep parts clean and apply engine oil during assembly.
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...fjsjefskekfmme
The document provides instructions to remove the front idler, recoil spring, and hydraulic track adjuster from an excavator as a 3-part process. It describes separating the track assemblies first, then using lifting devices to support and remove the components as a unit or individually from the track roller frame. Personal injury warnings are given regarding the compressed spring force involved.
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...fjsjefskekfmme
This document provides instructions for assembling the transmission of a 428D backhoe loader. It describes installing various transmission components like bearings, gears, shafts, and cases in multiple steps. It also explains how to install the fully assembled transmission in the machine and connect relevant components. The assembly procedure involves cleaning parts, applying oil, heating bearings, using various tools, and verifying clearances during installation.
This document provides instructions for servicing components of a 245 excavator, including:
- Removing and installing the bucket and boom pilot control valve and stick and swing pilot control valve.
- Disassembling and assembling pilot control valves.
- Removing and installing the speed and direction pilot control valve.
- Disassembling and assembling the speed and direction pilot control valve.
- Removing and installing line relief valves from control valves.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...fjsjefskekfmme
This document provides instructions for removing and installing a crankshaft pulley on a Caterpillar 3054 engine. It begins by listing the required tools. The removal procedure involves removing the V-belts, then removing three bolts and the thrust block that holds the pulley in position. The installation procedure specifies cleaning parts and installing in the reverse order, tightening the bolts to the specified torque.
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...fjsjefskekfmme
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 236D Skid Steer Loader. It describes using a valve spring compressor tool to compress the springs and remove the valve keepers and springs. When installing new springs, the document specifies installing them with the smaller pitch end downward. Safety precautions are provided to avoid injury from parts propelled by spring force.
The document provides instructions for disassembling the piston pump of a Caterpillar 236B3 skid steer loader. It describes removing hoses, fittings, covers, springs, seals, retainers, shafts and other components. Detailed steps and illustrations are given to disassemble the pump housing, actuator assembly, covers and internal parts while taking safety precautions for released spring forces. Measurements are recorded for reassembly.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...fjsjefskekfmme
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing these components in reverse order, including heating some parts for easier installation. Precautions are provided regarding cleaning, fluids, and personal protective equipment.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Caterpillar cat el200 b excavator (prefix 7df) service repair manual (7df0000...fjsjefskekfmme
This document provides instructions for removing, disassembling, assembling, and installing an engine oil pump on a Caterpillar EL200B excavator. The removal procedure involves removing the engine oil pan and then the oil pump. The disassembly procedure details removing various components of the oil pump including gears, shafts, and springs. The assembly procedure specifies lubricating parts and installing components in reverse order of removal. Finally, the installation procedure indicates ensuring clean mounting surfaces and installing the oil pump.
Caterpillar cat e300 b excavator (prefix 1wj) service repair manual (1wj00001...fjsjefskekfmme
This document provides instructions for removing the automatic timing advance from an E300B excavator engine. It describes:
1) Using various tools to turn the crankshaft and camshaft to specific positions to aid in removal.
2) Loosening a bolt to separate the automatic timing advance gear from the fuel pump camshaft.
3) Removing the automatic timing advance unit from the engine.
Proper positioning of engine components and use of the specified tools is necessary for safe and effective removal of the automatic timing advance.
Caterpillar cat 903 c compact wheel loader (prefix w6t) service repair manual...fjsjefskekfmme
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft assembly. Specific steps include removing retaining rings, sleeves, and press-fitting bearings. Torque specifications and notices about cleanliness and fluid containment are provided.
Caterpillar cat e240 c excavator (prefix 2rl) service repair manual (2rl00001...fjsjefskekfmme
This document provides instructions for removing and installing the front cover on an excavator engine. It begins by noting the tools needed and safety precautions. The removal procedure instructs to remove the bolts from the front cover and remove the cover and gasket. The installation procedure instructs to install a new gasket on the cover and then install the gasket and cover on the front of the engine.
Caterpillar cat 903 c compact wheel loader (prefix mw4) service repair manual...fjsjefskekfmme
This document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader powered by a C2.4 engine. It includes procedures for removing and installing fuel injection lines and nozzles, as well as disassembling, assembling, removing and installing the governor and camshaft. Detailed illustrations accompany each step-by-step procedure to ensure correct part placement and tool usage. Proper cleanup and containment of fluids is emphasized throughout.
Caterpillar cat e240 b excavator (prefix 8sf) service repair manual (8sf00001...fjsjefskekfmme
This document provides instructions for removing and installing the fuel transfer pump on an excavator model E240B powered by a 3116 engine. The removal procedure involves holding the spring loaded cover in place and removing bolts to access internal components. Components like the filter screen, seals, springs and fittings are then removed. The installation procedure is not described but presumably involves reversing the removal steps. Precautions are provided to contain fluids and prevent contamination.
This document provides instructions for removing and installing an implement pump on a 527 track skidder. It outlines the disassembly and assembly procedures in detail with illustrations. Safety notices are included to release pressure from the hydraulic system before removal and to relieve spring tension carefully during disassembly. The multi-page document thoroughly explains each step to disassemble and reassemble the implement pump.
This document provides instructions for removing and installing various components on a Caterpillar 527 Track Skidder, including the turbocharger, water temperature regulator, and radiator. The removal and installation procedures are described in detail in a step-by-step format and include illustrations. Safety and contamination prevention notices are also provided throughout the document.
Caterpillar cat e120 b excavator (prefix 6jf) service repair manual (6jf00001...fjsjefskekfmme
This document provides instructions for disassembling and assembling the travel drives of an E120B excavator. It describes removing and disassembling the travel drive and travel motor components. It then describes cleaning and inspecting the parts and reassembling the travel drive, which involves determining shim sizes, installing seals and gears, and torquing bolts to the specified values. The goal is to properly disassemble, clean, measure, and reassemble the travel drive components.
This document provides instructions for removing and installing the fuel priming pump and fuel filter base on a Caterpillar 527 Track Skidder with a 3304 engine. It describes:
- Removing the fuel priming pump by turning off the fuel supply, removing bolts/washers, disconnecting tubes, and removing the pump and gasket.
- Installing the fuel priming pump by installing the gasket, bolts/washers, connecting tubes, and turning on the fuel supply.
- Removing the fuel filter base by removing the fuel filter, disconnecting fuel lines, and removing bolts/washers/base/gasket.
- Installing the fuel filter base by installing the
Caterpillar cat e70 b track excavator (prefix 6ak) service repair manual (6ak...fjsjefskekfmme
The document is a service manual that provides specifications and operating instructions for the travel drive and motor of an E70B excavator. It describes the main components of the travel drive and motor system, including the axial plunger motor, counter-balance valve, parking brake, and reduction gears. It explains how each component functions and interacts with the others to convert hydraulic pressure into rotational force to power the tracks and control functions like braking and reversing.
This document provides instructions for connecting and disconnecting tracks on a 517 Track Skidder. It describes 13 steps for the connection procedure, including using tools to lift the machine, engage the track bushings with the sprocket segments, and tighten the master link. It also provides procedures for removing and installing sprocket segments, disassembling and assembling track rollers, and installing Duo-Cone seals.
This document provides instructions for servicing the automatic timing advance on a 517 TRACK SKIDDER model powered by a 3304 engine. It describes removing the fuel injection pump housing and governor, disassembling the housing, and reassembling the housing. The procedures involve using various tools to install and remove parts like bearings, lifters, and seals. Technicians are advised to keep parts clean and apply engine oil during assembly.
Caterpillar cat 320 c excavator (prefix mab) service repair manual (mab00001 ...fjsjefskekfmme
The document provides instructions to remove the front idler, recoil spring, and hydraulic track adjuster from an excavator as a 3-part process. It describes separating the track assemblies first, then using lifting devices to support and remove the components as a unit or individually from the track roller frame. Personal injury warnings are given regarding the compressed spring force involved.
Caterpillar cat 428 d backhoe loader (prefix bll) service repair manual (bll0...fjsjefskekfmme
This document provides instructions for assembling the transmission of a 428D backhoe loader. It describes installing various transmission components like bearings, gears, shafts, and cases in multiple steps. It also explains how to install the fully assembled transmission in the machine and connect relevant components. The assembly procedure involves cleaning parts, applying oil, heating bearings, using various tools, and verifying clearances during installation.
This document provides instructions for servicing components of a 245 excavator, including:
- Removing and installing the bucket and boom pilot control valve and stick and swing pilot control valve.
- Disassembling and assembling pilot control valves.
- Removing and installing the speed and direction pilot control valve.
- Disassembling and assembling the speed and direction pilot control valve.
- Removing and installing line relief valves from control valves.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...fjsjefskekfmme
This document provides instructions for removing and installing a crankshaft pulley on a Caterpillar 3054 engine. It begins by listing the required tools. The removal procedure involves removing the V-belts, then removing three bolts and the thrust block that holds the pulley in position. The installation procedure specifies cleaning parts and installing in the reverse order, tightening the bolts to the specified torque.
Caterpillar cat 236 d skid steer loader (prefix mpw) service repair manual (m...fjsjefskekfmme
The document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 236D Skid Steer Loader. It describes using a valve spring compressor tool to compress the springs and remove the valve keepers and springs. When installing new springs, the document specifies installing them with the smaller pitch end downward. Safety precautions are provided to avoid injury from parts propelled by spring force.
The document provides instructions for disassembling the piston pump of a Caterpillar 236B3 skid steer loader. It describes removing hoses, fittings, covers, springs, seals, retainers, shafts and other components. Detailed steps and illustrations are given to disassemble the pump housing, actuator assembly, covers and internal parts while taking safety precautions for released spring forces. Measurements are recorded for reassembly.
Caterpillar cat 320 c ln excavator (prefix axk) service repair manual (axk000...fjsjefskekfmme
This document provides instructions for removing and installing the engine oil pump on a 320C LN excavator powered by a 3066 engine. It describes removing the front housing, cover, gears, seals, and spindle. It then describes installing these components in reverse order, including heating some parts for easier installation. Precautions are provided regarding cleaning, fluids, and personal protective equipment.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Caterpillar cat th407 c telehandler operator and maintenance manual
1. Operation &
Maintenance Manual
Original Instructions
Keep this manual with machine at all times.
Models
TH336C, TH337C,
TH406C, TH407C,
TH414C, TH514C,
TH417C
S/N MJR00150 & After, S/N THM00150 & After
S/N DJB00150 & After, S/N SXJ00150 & After
S/N GAT00150 & After, S/N RCH00150 & After
S/N MLH00150 & After, S/N JJT00150 & After
S/N KEK00150 & After, S/N RWW00150 & After
S/N MWC00150 & After, S/N KKW00150 & After
S/N RRJ00150 & After, S/N RRW00150 & After
31200752
SEBU9285-04
Revised
June 27, 2016
2. Read This First
b 31200752
Read This First
This manual is a very important tool! Keep it with the machine at all times.
The purpose of this manual is to provide owners, users, operators, lessors, and lessees
with the precautions and operating procedures essential for the safe and proper machine
operation for its intended purpose.
Due to continuous product improvements, JLG Industries, Inc. reserves the right to make
specification changes without prior notification. Contact JLG Industries, Inc. for updated
information.
Operator Qualifications
The operator of the machine must not operate the machine until this manual has been
read, training is accomplished and operation of the machine has been completed under
the supervision of an experienced and qualified operator. Operation within the U.S.A.
requires training per OSHA 1910.178.
Operators of this equipment must possess a valid, applicable driver’s license, be in good
physical and mental condition, have normal reflexes and reaction time, good vision and
depth perception and normal hearing. Operator must not be using medication which
could impair abilities nor be under the influence of alcohol or any other intoxicant during
the work shift.
In addition, the operator must read, understand and comply with instructions contained
in the following material furnished with the material handler:
• This Operation & Maintenance Manual
• Telehandler Safety Manual (ANSI only)
• All instructional decals and plates
• Any optional equipment instructions furnished
The operator must also read, understand and comply with all applicable Employer,
Industry and Governmental rules, standards and regulations.
Modifications
Modifications to this machine may affect compliance with Industry Standards and/
or Governmental Regulations. Any modification must be approved by JLG.
3. Read This First
c31200752
This product must comply with all safety related bulletins. Contact JLG Industries, Inc. or
the local Caterpillar dealer representative for information regarding safety-related
bulletins which may have been issued for this product.
JLG Industries, Inc. sends safety related bulletins to the owner of record of this machine.
Contact JLG Industries, Inc. to ensure that the current owner records are updated and
accurate.
JLG Industries, Inc. must be notified immediately in all instances where JLG products have
been involved in an accident involving bodily injury or death of personnel or when
damage has occurred to personal property or the JLG product.
FOR:
• Accident Reporting and Product Safety Publications
• Current Owner Updates
• Questions Regarding Product Applications and Safety
• Standards and Regulations Compliance Information
• Questions Regarding Product Modifications
CONTACT:
Product Safety and Reliability Department
JLG Industries, Inc.
13224 Fountainhead Plaza
Hagerstown, MD 21742
USA
In USA:
Toll Free: 1-877-JLG-SAFE (1-877-554-7233)
Outside USA:
Phone: +1-717-485-6591
E-mail:
ProductSafety@JLG.com
4. Read This First
d 31200752
Other Publications Available
Service Manual....................................................................................................31200799 (UENR6251)
Parts Manual
TH306C Before SN MJR00271, SN THM00150,
TH307C Before SN DJB00484, Before SN SXJ00153
TH406C Before SN GAT00258,
TH407C Before SN MLH00843, Before SN JJT00172................................................31200730
TH414C Before SN KEK00373, Before SN RWW00169,
TH514C Before SN MWC00407, Before SN KKW00177,
TH417C Before SN RRJ00246, Before SN RRW00218 ..............................................31200729
TH306C SN MJR00271 to Present, SN THM00151 to Present...............................SEBP7164
TH307C SN DJB00484 to Present, SN SXJ00153 to Present..................................SEBP7166
TH406C SN GAT00258 to Present, SN RCH00150 to Present................................SEBP7165
TH407C SN MLH00843 to Present, SN JJT00172 to Present.................................SEBP7167
TH414C SN KEK00373 to Present, SN RWW00169 to Present..............................SEBP7168
TH514C SN MWC00407 to Present, SN KKW00177 to Present............................SEBP7170
TH417C SN RRJ00246 to Present, SN RRW00218 to Present................................SEBP7169
THP18s & THP45s Platforms for TH414, TH514, TH417,
TH414C, TH514C, TH417C Operation & Maintenance
Manual (if equipped for platform) ....................................................................................Contact JLG
Load Management Indicator System Operation & Maintenance
Manual (if equipped) .............................................................................................................Contact JLG
Note: The following standards may be referenced in this manual:
ANSI is compliant to ANSI/ITSDF B56.6
AUS is compliant to AS 1418.19
CE is compliant to EN1459
Refer to the machine Serial Number Plate to identify the applicable compliance standard.
5. Table of Contents
i31200752
TABLE OF CONTENTS
Revision Log
Read This First
Operator Qualifications ........................................................................... b
Modifications............................................................................................... b
Other Publications Available ................................................................. d
Table of Contents
Section 1—General Safety Practices
1.1 Hazard Classification System ....................................................................1-1
Safety Alert System and Safety Signal Words...............................1-1
1.2 General Precautions .....................................................................................1-1
1.3 Operation Safety............................................................................................1-2
Electrical Hazards....................................................................................1-2
Tip Over Hazard.......................................................................................1-4
Travel Hazard............................................................................................1-7
Load Falling Hazard ...............................................................................1-8
Lifting Personnel.....................................................................................1-9
Driving Hazards on Slopes................................................................1-10
Pinch Points and Crush Hazards.....................................................1-11
Fall Hazard..............................................................................................1-13
Chemical Hazards ................................................................................1-14
1.4 Product Link (if equipped) ......................................................................1-15
Federal Communications Commission (FCC)
Information for Users..........................................................................1-15
Section 2 - Pre-Operation and Inspection
2.1 Pre-Operation Check and Inspection.....................................................2-1
2.2 Safety Decals...................................................................................................2-3
TH336C, TH337C, TH406C & TH407C (CE & AUS).........................2-3
TH406C & TH407C (ANSI).....................................................................2-6
TH414C, TH514C & TH417C (CE & AUS) ..........................................2-8
TH514C (ANSI).......................................................................................2-11
2.3 Walk-Around Inspection..........................................................................2-14
2.4 Warm-Up and Operational Checks ......................................................2-16
Warm-Up Check ...................................................................................2-16
Operational Check...............................................................................2-16
2.5 Operator Cab................................................................................................2-17
2.6 Windows........................................................................................................2-18
Cab Door Window ...............................................................................2-18
Rear Window .........................................................................................2-19
Table of Contents
6. Table of Contents
ii 31200752
Section 3 - Controls and Indicators
3.1 General..............................................................................................................3-1
3.2 Controls ............................................................................................................3-2
Instrument Panel ....................................................................................3-4
Display Screen .........................................................................................3-6
Keypad........................................................................................................3-8
Ignition.................................................................................................... 3-10
Park Brake............................................................................................... 3-11
Parking Procedure............................................................................... 3-11
Transmission Control Lever (if equipped) .................................. 3-12
Load Stability Indicator - LSI (CE & AUS)...................................... 3-14
Steering Column Adjuster................................................................ 3-16
Joystick.................................................................................................... 3-18
Front Console Switches..................................................................... 3-24
Right Console Switches..................................................................... 3-26
Accessory Control Lever.................................................................... 3-28
Reversing Fan (if equipped)............................................................. 3-29
3.3 Anti Theft ...................................................................................................... 3-30
3.4 Steer Modes ................................................................................................. 3-32
Manual Steering Alignment Mode Change............................... 3-32
All Wheel Assisted Steering Alignment Mode Change.......... 3-33
3.5 Operator Seat .............................................................................................. 3-34
Operator Presence (CE & AUS)........................................................ 3-34
Adjustments.......................................................................................... 3-35
Seat Belt .................................................................................................. 3-38
3.6 Boom Indicators ......................................................................................... 3-39
Boom Extension................................................................................... 3-39
Boom Angle (AUS)............................................................................... 3-39
Section 4 - Operation
4.1 Engine ...............................................................................................................4-1
Starting the Engine................................................................................4-1
Battery Boosted Starting......................................................................4-2
Normal Engine Operation ...................................................................4-3
Shut-Down Procedure..........................................................................4-3
4.2 After-Treatment System (S/N MJR00150 & After,
S/N DJB00150 & After, S/N GAT00150 & After,
S/N MLH00150 & After, S/N KEK00150 & After,
S/N MWC00150 & After, S/N RRJ00150 & After -
if equipped with 75 kW engine) ..............................................................4-4
Automatic Regeneration .....................................................................4-4
Manual Regeneration............................................................................4-5
7. Table of Contents
iii31200752
4.3 Operating with a Non-Suspended Load...............................................4-6
Lift Load Safely.........................................................................................4-6
Picking Up a Load ...................................................................................4-6
Transporting a Load...............................................................................4-7
Leveling Procedure ................................................................................4-7
Placing a Load..........................................................................................4-8
Disengaging a Load...............................................................................4-8
4.4 Operating with a Suspended Load.........................................................4-9
Lift Load Safely.........................................................................................4-9
Picking Up a Suspended Load............................................................4-9
Transporting a Suspended Load....................................................4-10
Leveling Procedure .............................................................................4-10
Placing a Suspended Load ...............................................................4-11
Disengaging a Suspended Load ....................................................4-11
4.5 Road Operation (CE)..................................................................................4-12
4.6 Loading and Securing for Transport ...................................................4-13
Tiedown...................................................................................................4-13
Lifting .......................................................................................................4-14
Section 5 - Attachments and Hitches
5.1 Approved Attachments...............................................................................5-1
5.2 Unapproved Attachments .........................................................................5-1
5.3 JLG Supplied Attachments.........................................................................5-2
TH336C, TH337C, TH406C & TH407C...............................................5-2
TH414C & TH417C...................................................................................5-4
TH514C .......................................................................................................5-6
5.4 Telehandler/Attachment/Fork Capacity...............................................5-8
5.5 Use of the Load Chart ..................................................................................5-9
Capacity Indicator Locations ..............................................................5-9
Sample Load Chart (CE & ANSI) ......................................................5-10
Sample Load Chart (AUS)..................................................................5-12
Example...................................................................................................5-14
5.6 Attachment Installation ...........................................................................5-15
CAT Quick Coupler ..............................................................................5-15
JD Coupler..............................................................................................5-18
Manitou Coupler..................................................................................5-20
JCB Coupler............................................................................................5-23
Hydraulic Operated Attachment....................................................5-26
5.7 Platform Attachment (if equipped) .....................................................5-27
5.8 Adjusting/Moving Forks ..........................................................................5-28
8. Table of Contents
iv 31200752
5.9 Attachment Operation............................................................................. 5-30
Carriage w/Forks.................................................................................. 5-31
Side Shift Carriage............................................................................... 5-32
Rotate/Side Tilt Carriage and Fork Rotator Carriage............... 5-34
Fork Positioning Carriage ................................................................. 5-36
Bucket...................................................................................................... 5-38
Multi-Purpose Bucket......................................................................... 5-40
Grapple Bucket..................................................................................... 5-42
Manure Fork .......................................................................................... 5-44
Bale Handler .......................................................................................... 5-46
Coupler Mounted Hook .................................................................... 5-48
Truss Boom ............................................................................................ 5-49
Personnel Work Platform - Fork Mounted.................................. 5-50
Platform................................................................................................... 5-52
5.10 Hitches and Trailer Brakes (TH336C, TH337C, TH406C &
TH407C)......................................................................................................... 5-53
Retrieval Hitch....................................................................................... 5-53
Pin Hitch - CUNA C (Italy).................................................................. 5-54
Pin Hitch - CUNA D2 (Italy)............................................................... 5-55
EEC Manual Pin Hitch......................................................................... 5-56
EEC Auto Hitch...................................................................................... 5-57
Piton Frame and EEC Auto Hitch ................................................... 5-58
Hydraulic Hitch..................................................................................... 5-59
Trailer Brakes......................................................................................... 5-60
Section 6 - Emergency Procedures
6.1 Towing a Disabled Product .......................................................................6-1
Moving Short Distances.......................................................................6-1
Moving Longer Distance......................................................................6-1
6.2 Emergency Lowering of Boom.................................................................6-2
6.3 Emergency Lowering of Boom If Equipped for Platform ...............6-3
Auxiliary Power System........................................................................6-3
Machine Safety System Override (MSSO)(CE, if equipped).....6-4
6.4 Cab Emergency Exit .....................................................................................6-5
Section 7 - Lubrication and Maintenance
7.1 Introduction....................................................................................................7-1
Clothing and Safety Gear.....................................................................7-1
7.2 General Maintenance Instructions..........................................................7-2
7.3 Service and Maintenance Schedules .....................................................7-3
10 & 1st 50 Hour Maintenance Schedule.......................................7-3
50 & 1st 250 Hour Maintenance Schedule ....................................7-4
250 & 500 Hour Maintenance Schedule.........................................7-5
1000, 1500 & 3000 Hour Maintenance Schedule........................7-6
6000 & 12000 Hour Maintenance Schedule..................................7-7
10. Section 1—General Safety Practices
1-131200752
SECTION 1—GENERAL SAFETY PRACTICES
1.1 HAZARD CLASSIFICATION SYSTEM
Safety Alert System and Safety Signal Words
DANGER indicates an imminently hazardous situation which, if not avoided, will result in
death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
CAUTION indicates a potentiality hazardous situation which, if not avoided, may result in
minor or moderate injury.
1.2 GENERAL PRECAUTIONS
• Hydraulic cylinders are subject to thermal expansion and contraction. This may result
in changes to the boom and/or attachment position while the machine is stationary.
Factors affecting thermal movement can include the length of time machine is
stationary, hydraulic oil temperature, ambient air temperature and boom and/or
attachment position.
WARNING
Before operation, read and understand this manual. Failure to comply with the safety
precautions listed in this manual could result in machine damage, property damage,
personal injury or death.
DANGER OW0010
WARNING OW0021
CAUTION OW0031
11. Section 1—General Safety Practices
1-2 31200752
1.3 OPERATION SAFETY
Note: The manufacturer has no direct control over machine application and operation.
Therefore, safety issues listed in this manual are non-exhaustive. The user and operator are
responsible for conforming with good safety practices.
Electrical Hazards
• This machine is not insulated and does not provide protection from contact or being
near electrical current.
• Always check for power lines before raising the boom.
• Maintain distance from electrical lines, apparatus, or any energized (exposed or
insulated) parts according to the Minimum Approach Distance (MAD).
Note: This requirement shall apply except where employer, local or governmental
regulations are more stringent.
• Allow for machine movement and electrical line swaying.
• Maintain a clearance of at least 10 ft (3m) between any part of the machine and its
occupants, their tools and their equipment from any electrical line or apparatus
carrying up to 50,000 volts. One foot additional clearance is required for every
additional 30,000 volts or less.
Voltage Range
(Phase to Phase)
Minimum Approach Distance
(MAD)
0 to 50 KV 10 ft (3 m)
Over 50KV to 200 KV 15 ft (5 m)
Over 200 KV to 350 KV 20 ft (6 m)
Over 350 KV to 500 KV 25 ft (8 m)
Over 500 KV to 750 KV 35 ft (11 m)
Over 750 KV to 1000 KV 45 ft (14 m)
O 0891D
10 ft
(3m)
12. Section 1—General Safety Practices
1-331200752
• The minimum approach distance may be reduced if insulating barriers are installed to
prevent contact, and the barriers are rated for the voltage of the line being guarded.
These barriers shall not be part of (or attached to) the machine. The minimum
approach distance shall be reduced to a distance within the designed working
dimensions of the insulating barrier. This determination shall be made by a qualified
person in accordance with the employer, local, or governmental requirements for
work practices near energized equipment.
DANGER
Do not maneuver machine or personnel inside prohibited zone (MAD). Assume all
electrical parts and wiring are energized unless known otherwise.
13. Section 1—General Safety Practices
1-4 31200752
Tip Over Hazard
General
• For additional load requirements, refer to the appropriate capacity chart.
• Never use an attachment without the appropriate JLG approved capacity chart
installed on the telehandler.
• Understand how to properly use the capacity charts located in cab.
• DO NOT exceed rated lift capacity.
• Be sure that the ground conditions are able to support the machine.
• Be aware of wind conditions. Wind may cause load swing and dangerous side loads.
• DO NOT raise boom unless frame is level (0 degrees), unless otherwise noted on
capacity chart.
• DO NOT level machine with boom/attachment above 4 ft (1,2 m).
(AUS—DO NOT level machine with load more than 11.8 in (300 mm) above
ground surface.)
OW0050
OW0080
OW0100
4 FT
(1,2 M)
14. Section 1—General Safety Practices
1-531200752
• MAINTAIN proper tire pressure at all times. If proper tire pressures are not
maintained, this machine could tip over.
• Refer to manufacturer’s specifications for proper fill ratio and pressure requirements
for tires equipped with ballast.
• Always wear seat belt.
• Keep head, arms, hands, legs and all other body parts inside operator’s cab at all times.
If telehandler starts to tip over:
• DO NOT JUMP
• BRACE YOURSELF and STAY WITH THE MACHINE
• KEEP YOUR SEAT BELT FASTENED
• HOLD ON FIRMLY
• LEAN AWAY FROM THE POINT OF IMPACT
OH2291
OH20911
OH2221
15. Section 1—General Safety Practices
1-6 31200752
Non-Suspended Load
• DO NOT drive with boom raised.
Suspended Load
• Tether suspended loads to restrict movement.
• Weight of all rigging (slings, etc.) must be included as part of load.
• DO NOT attempt to use telehandler frame-leveling to compensate for load swing.
• Keep heavy part of load closest to attachment.
• Never drag the load; lift vertically.
When driving with a suspended load:
• Start, travel, turn and stop slowly to prevent load from swinging.
• DO NOT extend boom.
• DO NOT raise the load more than 300 mm (11.8 in) above ground surface or the
boom more than 45°.
• DO NOT exceed walking speed.
O 0901D
OW0150
16. Section 1—General Safety Practices
1-731200752
Travel Hazard
• Steering characteristics differ between steer modes. Identify the steer mode settings
of the telehandler being operated.
• DO NOT change steer modes while traveling. Steer modes must be changed while
telehandler is stationary.
• Visually verify proper wheel alignment after each steer mode change.
• Ensure that adequate clearance is provided for both rear tail swing and front fork swing.
• Look out for and avoid other personnel, machinery and vehicles in the area. Use a
spotter if you DO NOT have a clear view.
• Before moving be sure of a clear path and sound horn.
• When driving, retract boom and keep boom/attachment as low as possible while
maintaining visibility of mirrors and maximum visibility of path of travel.
• Always look in the direction of travel.
• Always check boom clearances carefully before driving underneath overhead
obstructions. Position attachment/load to clear obstacles.
• When driving in high speed, use only front wheel steer (if steering modes are selectable).
• Telehandlers equipped with solid or foam filled tires should not be used in
applications requiring excessive roading or driving extended distances. In the event
an application requires excessive roading or driving expanded distances, it is
recommended to use telehandlers not equipped with solid or foam filled tires.
OAL2030
2-WHEEL FRONT STEER 4-WHEEL CIRCLE STEER 4-WHEEL CRAB STEER
17. Section 1—General Safety Practices
1-8 31200752
Load Falling Hazard
• Never suspend load from forks or other parts of carriage weldment. Use only
approved lift points.
• DO NOT burn or drill holes in fork(s).
• Forks must be centered under load and spaced apart as far as possible.
OW0130
18. Section 1—General Safety Practices
1-931200752
Lifting Personnel
• When lifting personnel, USE ONLY an approved personnel work platform, with proper
capacity chart displayed in the cab.
• DO NOT drive machine from cab when personnel are in platform.
O 0171W
O 0921D
19. Section 1—General Safety Practices
1-10 31200752
Driving Hazards on Slopes
To maintain sufficient traction and braking capabilities, travel on slopes as follows:
• When unloaded, drive with forks pointed downhill.
• When loaded, drive with the forks pointed uphill.
• For additional travel requirements, refer to the appropriate capacity chart.
• To avoid overspeeding the engine and drivetrain when driving down
slopes, downshift to a lower gear and use the service brake as necessary to
maintain a slow speed. DO NOT shift into neutral and coast downhill.
• Avoid excessively steep slopes or unstable surfaces. To avoid tip over DO NOT
drive across excessively steep slopes under any circumstances.
• Avoid turning on a slope. Never engage “inching” or shift to “Neutral” when
going downhill.
• DO NOT park on a slope.
OW0200
20. Section 1—General Safety Practices
1-1131200752
Pinch Points and Crush Hazards
Stay clear of pinch points and rotating parts on the telehandler.
• Stay clear of moving parts while engine is running.
• Keep clear of steering tires and frame or other objects.
• Keep clear from under boom.
OW0210
OW0220
OW0230
21. Section 1—General Safety Practices
1-12 31200752
• Keep clear of boom holes.
• Keep arms and hands clear of attachment tilt cylinder.
• Keep hands and fingers clear of carriage and forks.
• Keep others away while operating.
OW0240
OW0250
OW0260
OW0960
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. Section 1—General Safety Practices
1-1331200752
Fall Hazard
• Enter using the proper hand holds and steps provided. Always maintain 3-point
contact when mounting or dismounting. Never grab control levers or steering wheel
when mounting or dismounting the machine.
• DO NOT get off the machine until the shutdown procedure on page 4-5 has been
performed.
• DO NOT carry riders. Riders could fall off machine causing death or serious injury.
OW0280
OW0290
24. Section 1—General Safety Practices
1-14 31200752
Chemical Hazards
Exhaust Fumes
• DO NOT operate machine in an enclosed area without proper ventilation.
• DO NOT operate the machine in hazardous environments unless approved for that
purpose by JLG and site owner. Sparks from the electrical system and the engine
exhaust can cause an explosion.
Flammable Fuel
• DO NOT fill the fuel tank or service the fuel system near an open flame, sparks or
smoking materials. Engine fuel is flammable and can cause a fire and/or explosion.
Hydraulic Fluid
• DO NOT attempt to repair or tighten any hydraulic hoses or fittings while the engine is
running or when the hydraulic system is under pressure.
• Stop engine and relieve trapped pressure. Fluid in the hydraulic system is under
enough pressure that it can penetrate the skin.
• DO NOT use your hand to check for leaks. Use a piece of cardboard or paper to search
for leaks. Wear gloves to protect hands from spraying fluid.
OW0300
OW0950