This document provides instructions for disassembling and assembling the front axle components of an M318C Wheeled Excavator, including:
1. Removing components like the carrier housing, planetary gears, brake discs, and hub assembly which involve using various specialty tools.
2. Dismantling internal components of the ring gear assembly and hub.
3. Cleaning all parts thoroughly before assembly and inspecting for wear.
4. Heating and pressing components like bearings during assembly and tightening the spanner nut to the specified torque using a torque wrench.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M318C WHEELED EXCAVATOR BCZ
Configuration: M318C Excavator BCZ02001-UP (MACHINE) POWERED BY 3056E Engine
Disassembly and Assembly
M318C Wheeled Excavator Power Train
Media Number -RENR6675-05 Publication Date -01/08/2018 Date Updated -29/08/2018
i04706197
Final Drive Carriers, Hubs and Brakes - Disassemble - Front
Axle
SMCS - 4054-015; 4092-015; 4253-015; 4255-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 147-1744 Bearing Puller 1
B 1P-0510 Driver Gp 1
C 1P-1859 Retaining Ring Pliers 1
D 5F-4764 Pry Bar 2
E
6V-6080 Torque Multiplier Gp 1
4C-4061 Center Ring 1
4C-4058 Spanner 1
F 1U-6415 Three Jaw Puller 1
G 1U-6405 Three Jaw Puller 1
H 1P-1853 Retaining Ring Pliers 1
J 1U-8758 Retaining Ring Pliers 1
ZZ
6V-9508 Face Seal Plug 1
6V-9829 Cap As 1
1/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
3. Start By:
A. Remove the tire and rim (front). Refer to Disassembly and Assembly, "Tire and Rim -
Remove (Front)".
B. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
Note: SERVICE DATA: TOOLING (ZZ) WILL NOT BE IDENTIFIED IN
PHOTOGRAPHS IN THE REMOVAL OR THE INSTALLATION. THIS TOOLING IS
SHOWN IN ORDER TO ASSIST THE EXPERIENCED SERVICEMAN.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
At operating temperature, the hydraulic oil is hot and under pressure.
Hot oils can cause burns.
To prevent possible personal injury, release the pressure in the work
tool hydraulic circuit (boom, stick, bucket, and swing), travel circuits,
and the hydraulic oil tank at the filler cap before any hydraulic lines or
components are disconnected or removed.
Remove the filler cap only when the engine is stopped and the filler cap
is cool enough to touch.
1. Drain the front final drives. Final drives with oil cooled disc brakes have approximately 2.0
L (.5 US gal).
2/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
4. Illustration 1 g01137933
2. Attach a suitable lifting device to carrier housing (2) .
3. Remove retaining bolts (1) .
4. Remove carrier housing (2) . The weight of carrier housing (2) is approximately 25 kg (55
lb).
Illustration 2 g01138122
5. Disconnect hose assembly (3) and plug.
3/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
5. Illustration 3 g01137909
6. Use Tooling (C) in order to remove retaining ring (4) .
7. Use Tooling (D) in order to remove planetary gears (5) from the housing.
8. Remove thrust washer (6) .
Illustration 4 g00894127
9. Remove retaining rings (8) and the washers from planetary gear (5) .
10. Remove roller bearing (7) from planetary gear (5) .
4/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
6. Illustration 5 g01139326
11. Use Tooling (H) in order to remove retaining ring (9) .
Illustration 6 g00894129
12. Remove washer (10) .
13. Remove hex bolt (11) .
Illustration 7 g00894130
5/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
7. 14. Remove sun gear (13) .
15. Remove gear (12) .
Illustration 8 g01139321
16. Use Tooling (J) in order to remove retaining ring (14) .
17. Remove thrust washer (15) .
Illustration 9 g00894133
18. Remove four discs (16) and three plates (17) .
6/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
9. 22. Install Tooling (E) in order to remove spanner nut (20) .
Illustration 13 g01138352
23. Install Tooling (F) , Tooling (B) , and a suitable lifting device in order to remove ring gear
assembly (21) .
Illustration 14 g00894139
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Remove nuts (22) and brake piston (23) from ring gear assembly (21) .
8/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10. Illustration 15 g00894140
25. Remove bolts (24) and the springs from ring gear assembly (21) .
26. Remove O-ring seal (25) and the backup ring.
Illustration 16 g00894141
27. Remove retaining ring (26) from the gear assembly.
9/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
11. Illustration 17 g00894142
Illustration 18 g00894145
28. Use a hammer and a punch in order to remove brake piston (23) and ring (27) from ring
gear assembly (21) .
29. Remove seals (28) .
30. Remove backup rings (29) .
Illustration 19 g00894146
31. Remove O-ring seal (30) from hub assembly (31) .
32. Remove O-ring seal (32) , and the O-ring seal from spindle (33) .
10/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
12. Illustration 20 g01138353
33. Attach Tooling (F) , Tooling (B) , and a suitable lifting device in order to remove hub
assembly (31) .
34. Remove hub assembly (31) .
Illustration 21 g00894675
Note: When hub (31) is removed from the spindle the outer bearing cone (34) will be loose.
35. Remove bearing cone (34) from hub assembly (31) .
11/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
13. Illustration 22 g00894676
36. Remove inner bearing cup (35) from hub assembly (31) .
Illustration 23 g00894677
37. Remove seal (37) from hub assembly (31) .
38. Remove outer bearing cup (36) from hub assembly (31) .
Illustration 24 g00894678
12/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
14. 39. Remove spacer (38) from spindle (33) .
Illustration 25 g01138354
40. Install Tooling (G) , Tooling (B) , and Tooling (A) .
41. Remove inner bearing cone (39) from the spindle.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Apr 6 08:12:32 UTC+0800 2020
13/13(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
15. Shutdown SIS
Previous Screen
Product: WHEELED EXCAVATOR
Model: M318C WHEELED EXCAVATOR BCZ
Configuration: M318C Excavator BCZ02001-UP (MACHINE) POWERED BY 3056E Engine
Disassembly and Assembly
M318C Wheeled Excavator Power Train
Media Number -RENR6675-05 Publication Date -01/08/2018 Date Updated -29/08/2018
i04706203
Final Drive Carriers, Hubs and Brakes - Assemble - Front
Axle
SMCS - 4054-016; 4092-016; 4253-016; 4255-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-0510 Driver Gp 1
C 1P-1859 Retaining Ring Pliers 1
E
6V-6080 Torque Multiplier Gp 1
4C-6061 Center Ring 1
4C-4058 Spanner 1
F 1U-6415 Three Jaw Puller 1
H 1P-1853 Retaining Ring Pliers 1
J 1U-8758 Retaining Ring Pliers 1
K 123-6707 Seal Installer 1
L 6V-7030 Micrometer Depth Gauge Group 1
M 8T-0447 Dial Caliper 1
N 188-7400 Piston Installer 1
P 1P-0808 Multipurpose Grease 1
R 9S-7354 Torque Wrench Gp 1
1/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
16. S 9U-5006 Torque Wrench 1
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning
fluid. Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be
deposited on the parts which may cause trouble. Inspect all parts. If any parts are worn or
damaged, use new parts for replacement. Dirt and other contaminants can damage the precision
component. Perform assembly procedures on a clean work surface. Keep components covered and
protected at all times.
Illustration 1 g00895163
1. Raise the temperature of inner bearing cone (39).
2. Install inner bearing cone (39) onto spindle (33).
Illustration 2 g01138419
2/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
17. Illustration 3 g00895164
3. Lower the temperature of bearing cup (35) and (36).
4. Use Tooling (B) in order to install bearing cup (36) and (35).
Note: Do not install seals at this time.
Illustration 4 g00894678
5. Install spacer (38) onto spindle (33).
Illustration 5 g00895166
3/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
18. 6. Raise the temperature of bearing cone (34).
7. Install hub assembly (31).
8. Install bearing (34) onto spindle (33).
Illustration 6 g00895308
Illustration 7 g01139371
9. Install ring gear assembly (21) onto spindle (33).
10. Install spanner nut (20).
11. Install Tooling (E) onto spanner nut (20).
12. Rotate the hub while spanner nut (20) is being tightened. Use Tooling (S) in order to tighten
the spanner nut to a torque of 1200 N·m (885 lb ft). Do not exceed a torque of 1464 N·m
(1080 lb ft).
4/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
19. Illustration 8 g00895310
13. Install Tooling (R).
Note: Tooling (R) must be in line with the radius of the hub, as shown.
Note: The required rolling torque for the roller bearing is 15 ± 3 N·m (133 ± 27 lb in).
Note: The required rolling torque for the roller bearing must be measured from the center of
the hub. Tooling (R) is not attached to the center of the hub, but to the wheel stud. The
torque reading for Tooling (R) has been recalculated. The calculation is based on the length
of Tooling (R). The torque reading on Tooling (R) must be 8.2 ± 1.6 N·m (73 ± 14 lb in).
This setting on Tooling (R) will obtain the required rolling torque of 15 ± 3 N·m
(133 ± 27 lb ft).
Note: If Tooling (R) is not used, the torque must be recalculated. Refer to Sliderule Torque
Computer, SEHS7150. If the sliderule torque computer is not available, calculate the torque
by using the following formula: (15 ± 3 N·m) X (L / (L+R)). L = the length of the arm of
the torque wrench. R = the distance between the center of the hub and the wheel stud.
14. Use Tooling (R) to slowly rotate the hub. Record the amount of torque that is required to
rotate the hub. The torque reading on Tooling (R) must be 8.2 ± 1.6 N·m (73 ± 14 lb in). If
the rolling torque is not correct, repeat Step 5 through Step 13 using a different bushing. If
the rolling torque is greater than the value that is specified, install the next wider bushing. If
the rolling torque is less than the specified value, install the next narrower bushing. Recheck
the rolling torque.
Note: After the correct size for spindle (33) and the correct rolling torque are obtained, the
ring gear and the hub are removed in order to install the seals.
5/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
20. Illustration 9 g00895712
15. Install Tooling (E).
16. Remove spanner nut (20).
Illustration 10 g01138352
17. Install Tooling (F), Tooling (B), and a suitable lifting device.
18. Remove ring gear assembly (21).
Illustration 11 g01138353
19. Install Tooling (F), Tooling (B), and a suitable lifting device.
6/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
21. 20. Remove hub (31).
Illustration 12 g00895726
21. Use Tooling (K) in order to install seal (37) into hub (31).
Illustration 13 g00895727
22. Install hub (31) onto spindle (33).
23. Heat bearing cone (34).
24. Install bearing cone (34) onto spindle (33).
25. Install backup ring (32) and the O-ring seal onto spindle (33).
26. Install the backup ring and the O-ring seal (30) onto hub (31).
7/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
22. Illustration 14 g00895734
27. Install retainer (26).
28. Install retaining ring (27) into ring gear assembly (21).
Illustration 15 g00895737
Note: Slightly stretch one of the seals (28) prior to installing the seal on the larger diameter.
Heat two backup rings (29) in an oil bath prior to installing the backup rings.
29. Install backup rings (29) and seal (28) onto brake piston (23). Install the seals so that the oil
grooves are facing each other.
8/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
23. Illustration 16 g00895738
30. Install Tooling (N) on brake piston (23), as shown. Install the centering ring (part of Tooling
(N)) on the brake piston first. The centering ring is the larger ring in Tooling (N). Install the
installer (part of Tooling (N)) on the brake piston. Remove the centering ring from the brake
piston.
Illustration 17 g00896100
31. Use a press to carefully position brake piston (23) against the shoulder in ring gear assembly
(21). Remove the installer (part of Tooling (K)) from the brake piston.
9/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 18 g00896101
32. Position O-ring seal (25) and the backup ring.
33. Install the springs and bolts (24) into ring gear assembly (21).
Illustration 19 g00896103
Illustration 20 g00896104
10/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
26. Illustration 21 g00896105
34. Apply 9S-3263 Thread Lock Compound on the threads of eight socket head bolts (24).
Tighten nuts (22) until Distance (W) between the threaded end of each socket head bolt and
the contact surface of brake piston (23) is 0.75 ± 0.25 mm (0.030 ± 0.010 inch). Use
Tooling (L) to measure Distance (W) at each socket head bolt. The maximum torque of each
nut that is used on the end of socket head bolts (24) must not exceed 11 N·m (8 lb ft).
Illustration 22 g00896107
Note: Make sure that the holes for the supply oil in the spindle align with the holes for the
supply oil in the ring gear.
35. Apply clean hydraulic oil on O-ring seal (32) and on the split ring that is located on the
housing for the steering axle. Make sure that the ends of the split ring are in contact with
each other. ApplyTooling (P) to O-ring seal (32) and the split ring. Install ring gear (21) on
the housing for the steering axle assembly.
11/19(W)w
2020/4/6https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...