The document provides instructions for servicing the track and track roller frames of a D6H track-type tractor. It describes removing the track roller frame by using various tools to support the tractor and remove bolts/pins connecting the frame. Reinstalling involves reversing these steps, being careful to properly align parts and fill compartments with oil. Proper safety precautions are noted such as ensuring the tractor is on level ground before working on the roller frames.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjsjekksemm
The document provides instructions for servicing a D6H track-type tractor. It begins by stating that the tractor must be on level, hard ground before separating the track roller frames. It then provides detailed steps for removing and installing the track roller frames and idlers. The removal process involves using various tools to support the frame and separate components. Reinstallation follows the reverse process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fdjjsekksemxs
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to detach the frame. It also describes removing and installing idlers, which involves separating the caps and blocks to take the idlers off and replacing seals before reattaching everything.
Caterpillar cat d11 t carrydozer track type tractor (prefix jns) service repa...fjkskmmdmme
The document provides instructions for disassembling a track roller frame on a D11T track-type tractor. It describes using straps and a hydraulic cylinder with a puller stud to remove the recoil spring and pilot assembly from the front of the track roller frame. It then explains how to remove various components from the track roller frame including the trunnion, plate, pin, and retainer assembly using lifting devices and tools. The overall purpose is to fully disassemble the track roller frame for repair or replacement of parts.
Caterpillar cat 950 k wheel loader (prefix j5m) service repair manual (j5m000...fjsqazkekdmme
The document provides instructions for installing the rear power take-off (RPTO) on a 950K wheel loader. It describes cleaning components, aligning sleeve bearings, installing gears and idler hubs onto the flywheel housing using press tools, lubricating parts, and tightening bolts to specified torques. The 20-step procedure includes installing adapters and seals, checking backlash and end play, and attaching the gear assembly to the crankshaft.
Caterpillar cat 345 c excavator (prefix jar) service repair manual (jar00001 ...fjkskedmme
This document provides instructions for removing and installing the rear gear group on a 345C excavator. It details:
1) The required tools and parts for the job.
2) The step-by-step removal procedure which includes removing the electric starting motor, flywheel, rear gear components, seals, and bearings.
3) The installation procedure which provides directions for installing the rear gear group components in reverse order and ensuring proper bearing placement and torque specifications are followed.
Caterpillar cat 438 c backhoe loader (prefix 1tr) service repair manual (1tr0...ujdfjjkskkmmde
This document provides instructions for disassembling and assembling the final drive and axle housing on a 438C backhoe loader. It lists 32 steps for disassembly, including draining fluids, removing gears, bearings, seals, and other components. The assembly section lists 23 steps to reinstall these components in reverse order, noting proper torque specifications and lubrication points. Tooling required is identified for various removal and installation tasks.
Caterpillar cat d8 k track type tractor dozer bulldozer (prefix 77v) service ...fusjejfjskeksmem
This document provides instructions for removing and installing a torque divider from a D8K track-type tractor. Key steps include:
1. Draining the transmission oil and removing connecting lines, valves, and other components to access the torque divider.
2. Using eyebolts and wire to safely remove the heavy torque divider assembly.
3. Reversing the process to reinstall the torque divider, replacing gaskets and fittings and refilling the transmission with oil.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjsjekksemm
The document provides instructions for servicing a D6H track-type tractor. It begins by stating that the tractor must be on level, hard ground before separating the track roller frames. It then provides detailed steps for removing and installing the track roller frames and idlers. The removal process involves using various tools to support the frame and separate components. Reinstallation follows the reverse process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fisjejfskemmd
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fdjjsekksemxs
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to detach the frame. It also describes removing and installing idlers, which involves separating the caps and blocks to take the idlers off and replacing seals before reattaching everything.
Caterpillar cat d11 t carrydozer track type tractor (prefix jns) service repa...fjkskmmdmme
The document provides instructions for disassembling a track roller frame on a D11T track-type tractor. It describes using straps and a hydraulic cylinder with a puller stud to remove the recoil spring and pilot assembly from the front of the track roller frame. It then explains how to remove various components from the track roller frame including the trunnion, plate, pin, and retainer assembly using lifting devices and tools. The overall purpose is to fully disassemble the track roller frame for repair or replacement of parts.
Caterpillar cat 950 k wheel loader (prefix j5m) service repair manual (j5m000...fjsqazkekdmme
The document provides instructions for installing the rear power take-off (RPTO) on a 950K wheel loader. It describes cleaning components, aligning sleeve bearings, installing gears and idler hubs onto the flywheel housing using press tools, lubricating parts, and tightening bolts to specified torques. The 20-step procedure includes installing adapters and seals, checking backlash and end play, and attaching the gear assembly to the crankshaft.
Caterpillar cat 345 c excavator (prefix jar) service repair manual (jar00001 ...fjkskedmme
This document provides instructions for removing and installing the rear gear group on a 345C excavator. It details:
1) The required tools and parts for the job.
2) The step-by-step removal procedure which includes removing the electric starting motor, flywheel, rear gear components, seals, and bearings.
3) The installation procedure which provides directions for installing the rear gear group components in reverse order and ensuring proper bearing placement and torque specifications are followed.
Caterpillar cat 438 c backhoe loader (prefix 1tr) service repair manual (1tr0...ujdfjjkskkmmde
This document provides instructions for disassembling and assembling the final drive and axle housing on a 438C backhoe loader. It lists 32 steps for disassembly, including draining fluids, removing gears, bearings, seals, and other components. The assembly section lists 23 steps to reinstall these components in reverse order, noting proper torque specifications and lubrication points. Tooling required is identified for various removal and installation tasks.
Caterpillar cat d8 k track type tractor dozer bulldozer (prefix 77v) service ...fusjejfjskeksmem
This document provides instructions for removing and installing a torque divider from a D8K track-type tractor. Key steps include:
1. Draining the transmission oil and removing connecting lines, valves, and other components to access the torque divider.
2. Using eyebolts and wire to safely remove the heavy torque divider assembly.
3. Reversing the process to reinstall the torque divider, replacing gaskets and fittings and refilling the transmission with oil.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...ufdjjsjejfkkekm
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fujsjefkksekmme
The document provides instructions for servicing a track-type tractor by removing and installing the track roller frames and idlers. It is a multi-step process that involves using various tools to separate the tracks, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Special precautions are outlined to prevent injury or damage during the process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjskekfsmemmmqwe
The document provides instructions for servicing a track-type tractor by removing and installing the track roller frames and idlers. It is a multi-step process that involves using various tools to separate the tracks, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Special precautions are outlined to prevent injury or damage during the process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...ufdjjsjejfkkemm
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are outlined to prevent injury when working on sloped or soft surfaces.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...kfkseflsekfmmse
This document provides instructions for servicing the track-type tractor model D6H, beginning with separating the track and ending by reconnecting it. The multi-step process includes instructions for inspecting and removing the front track roller frame, installing new track roller frames, removing and installing idlers, and disassembling and reassembling idlers. Safety precautions are provided to prevent personal injury and equipment damage during the service work.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fusjjefjkskemem
The document provides instructions for servicing the track roller frames on a D6H track-type tractor. It begins by instructing technicians to thoroughly inspect the front track roller frame before separating the track. Detailed steps are then provided to safely separate the track and remove the track roller frame using various tools. The process is reversed to reinstall the track roller frame and reconnect the track. Safety precautions are emphasized throughout.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjsekdemmd
This document provides instructions for servicing the track-type tractor model D6H, beginning with separating the track and ending by reconnecting it. The multi-step process includes instructions for inspecting and removing the front track roller frame, installing new idlers, and refilling lubricants. Safety precautions are outlined to prevent injury when working on sloped or unstable surfaces.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjjsekksemmer
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, securing the tractor, and using various tools to remove bolts and pins holding the frame in place. Instructions are also given for removing and installing idlers, including disassembling the idler by removing seals and shafts, cleaning parts, and reassembling the idler.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjsjefskekfmme
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to safely separate and support the tractor before removing components. The document then provides step-by-step instructions for removing, inspecting, and reinstalling idler assemblies and their components. Safety precautions are included throughout regarding the heavy weight of parts and use of supporting tools and equipment.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fujsjfkkskefsme
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to separate the frame from the equalizer bar. It also describes removing and installing idlers, which involves separating the caps and blocks to access the shaft and seals.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fhhsjdkmem
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to separate the frame from the equalizer bar. It also describes removing and installing idlers, which involves separating the caps and blocks to access the shaft and seals.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...ufjdjjksekmem
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fusjjfksekmme
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjjskeifkskem
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...9fsoeodkkd
The document provides instructions for servicing the track roller frames and idlers of a D6H track-type tractor. It describes in detail how to remove and install the track roller frames and idlers, including using various tools to support the frames and align parts. The process involves separating the track, removing pins and bolts, and reinstalling components in the reverse order while maintaining proper alignment and lubrication.
Toyota CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Toyota CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Toyota CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Liebherr er 932 hydraulic excavator service repair manualuudjjekdmme
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides a service manual for wheeled excavators. It contains sections on the machine, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust systems, cooling system, brakes, steering, driveline, hydraulics, and electrical systems. The section summarized here provides information about the engine, including its basic description, internal components, health and safety warnings, technical data, identification of external/internal components, and operation.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
More Related Content
Similar to Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6fc00001-03999)
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...ufdjjsjejfkkekm
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are noted such as ensuring the tractor is level and stable before removing frames to prevent injury.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fujsjefkksekmme
The document provides instructions for servicing a track-type tractor by removing and installing the track roller frames and idlers. It is a multi-step process that involves using various tools to separate the tracks, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Special precautions are outlined to prevent injury or damage during the process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...fjjskekfsmemmmqwe
The document provides instructions for servicing a track-type tractor by removing and installing the track roller frames and idlers. It is a multi-step process that involves using various tools to separate the tracks, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Special precautions are outlined to prevent injury or damage during the process.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...ufdjjsjejfkkemm
The document provides instructions for servicing a track-type tractor model D6H, including removing and installing track roller frames, idlers, and disassembling and assembling idlers. The multi-step process involves using various tools to separate parts, align components, install seals, and reassemble. Safety precautions are outlined to prevent injury when working on sloped or soft surfaces.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...kfkseflsekfmmse
This document provides instructions for servicing the track-type tractor model D6H, beginning with separating the track and ending by reconnecting it. The multi-step process includes instructions for inspecting and removing the front track roller frame, installing new track roller frames, removing and installing idlers, and disassembling and reassembling idlers. Safety precautions are provided to prevent personal injury and equipment damage during the service work.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fusjjefjkskemem
The document provides instructions for servicing the track roller frames on a D6H track-type tractor. It begins by instructing technicians to thoroughly inspect the front track roller frame before separating the track. Detailed steps are then provided to safely separate the track and remove the track roller frame using various tools. The process is reversed to reinstall the track roller frame and reconnect the track. Safety precautions are emphasized throughout.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjsekdemmd
This document provides instructions for servicing the track-type tractor model D6H, beginning with separating the track and ending by reconnecting it. The multi-step process includes instructions for inspecting and removing the front track roller frame, installing new idlers, and refilling lubricants. Safety precautions are outlined to prevent injury when working on sloped or unstable surfaces.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjjsekksemmer
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, securing the tractor, and using various tools to remove bolts and pins holding the frame in place. Instructions are also given for removing and installing idlers, including disassembling the idler by removing seals and shafts, cleaning parts, and reassembling the idler.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjsjefskekfmme
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to safely separate and support the tractor before removing components. The document then provides step-by-step instructions for removing, inspecting, and reinstalling idler assemblies and their components. Safety precautions are included throughout regarding the heavy weight of parts and use of supporting tools and equipment.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fujsjfkkskefsme
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to separate the frame from the equalizer bar. It also describes removing and installing idlers, which involves separating the caps and blocks to access the shaft and seals.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fhhsjdkmem
This service manual provides instructions for servicing track-type tractors. It details the process for removing and installing track roller frames, which requires separating the track, supporting the tractor, and removing bolts and pins to separate the frame from the equalizer bar. It also describes removing and installing idlers, which involves separating the caps and blocks to access the shaft and seals.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...ufjdjjksekmem
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fusjjfksekmme
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6cf) service repair manual (6...fjjskeifkskem
This service manual provides instructions for servicing the track and idlers of a D6H track-type tractor. It describes how to remove and install the track roller frames and idlers. The process involves using various tools to separate the track, support the tractor, and remove/install components like the equalizer bar pin, retainer, and seals. Proper lubrication and alignment of parts is emphasized.
Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6...9fsoeodkkd
The document provides instructions for servicing the track roller frames and idlers of a D6H track-type tractor. It describes in detail how to remove and install the track roller frames and idlers, including using various tools to support the frames and align parts. The process involves separating the track, removing pins and bolts, and reinstalling components in the reverse order while maintaining proper alignment and lubrication.
Similar to Caterpillar cat d6 h track type tractor (prefix 6fc) service repair manual (6fc00001-03999) (15)
Toyota CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBTY4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Toyota CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBT6 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Toyota CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Manualuudjjekdmme
This is the Highly Detailed factory service repair manual for theTOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.TOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Battery
Controller
Electrical System Troubleshooting
Motor
Drive Unit
Front Axle
Rear Axle
Steering
Brake
Body
Frame
Appendix
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveTOYOTA CBT4 ELECTRIC POWERED TOWING TRACTOR Service Repair Workshop Manual.
Thanks for visiting!
Liebherr er 932 hydraulic excavator service repair manualuudjjekdmme
The document is a service manual that provides technical data, maintenance guidelines, and information on systems for hydraulic excavators models ER 900-942. It covers general information, tools, the engine, coupling and splitterbox, hydraulic system, hydraulic components, electrical system, swing gear, swing ring, travel gear, track components, undercarriage and uppercarriage attachments, cab heater and air conditioning. The manual is intended to assist with maintenance and repairs for the excavator models.
Jcb js175 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Jcb js160 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides a service manual for wheeled excavators. It contains sections on the machine, attachments, body/framework, operator station, HVAC, engine, fuel/exhaust systems, cooling system, brakes, steering, driveline, hydraulics, and electrical systems. The section summarized here provides information about the engine, including its basic description, internal components, health and safety warnings, technical data, identification of external/internal components, and operation.
Jcb js145 w wheeled excavator service repair manual (from 2143159 to 2143459;...uudjjekdmme
This document provides information about servicing JCB wheeled excavators. It contains sections on the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The section on the engine provides details on health and safety, technical data, component identification, operation, maintenance procedures, and storage for the engine. It includes diagrams labeling external and internal engine parts and describes the four-stroke operating cycle.
Liebherr r964 c 1447 hydraulic excavator service repair manualuudjjekdmme
The document is a service manual that provides technical information for maintenance and repair of Liebherr hydraulic excavators. It contains sections on the engine, hydraulic and electrical systems, undercarriage, and other components. Symbols are used to indicate dangers, warnings, and important notes. The manual is intended to assist customer support and training, but does not replace proper technical qualifications or training.
Jcb js115 excavator service repair manual sn 2397465 and upuudjjekdmme
The document provides a service manual for excavator tracks. It includes sections on track components, measuring wear using technical data tables, adjusting tracks, removing and installing tracks, and storing tracks. Procedures are provided for measuring link rail surface wear, track pitch/internal pin and bush wear, and bush external wear to determine wear percentages and maintenance requirements. Track tension, pin and bush diameters, and link heights are checked against specification tables to identify when maintenance is needed.
Jcb 540 200 telescopic handler service repair manual sn from 2460601 onwardsuudjjekdmme
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, fuel and exhaust, cooling, brake, steering, hydraulic and electrical systems. The engine section provides technical data and instructions for servicing parts like the valves, connecting rods, pistons, and more. Proper safety procedures and use of specialized tools are emphasized throughout.
Jcb 540 170 telescopic handler service repair manual sn from 2902000 onwardsuudjjekdmme
This service manual provides instructions for servicing the Loadall rough terrain variable reach truck. It contains sections on the machine body and framework, operator station, engine, fuel and exhaust, cooling, brake, steering, hydraulic and electrical systems. The engine section provides technical data and instructions for servicing parts like the valves, connecting rods, pistons, and more. Proper safety procedures and use of specialized tools are emphasized throughout.
Liebherr r960 demolition 1787 hydraulic excavator service repair manualuudjjekdmme
This document is a service manual that covers maintenance and repair for various systems of an industrial machine. It includes sections on technical data, maintenance procedures, drive systems, cooling systems, hydraulics, electrical systems, gearboxes, and other components. The manual provides instructions and specifications to service the machine.
Jcb 536 60 tier 4 telescopic handler service repair manual sn from 2336575 on...uudjjekdmme
The document provides instructions for servicing fuel injectors and related components on JCB Loadall vehicles. It begins with an introduction to fuel injectors and their purpose. The main sections include checking injector operation using leak-off tests, removing and installing individual injectors, removing and installing injector seals, and removing and installing the common fuel rail assembly. Torque specifications are provided for reinstallation.
Jcb 535 95 tier 4 telescopic handler service repair manual sn from 2902000 on...uudjjekdmme
This document provides service and repair instructions for fuel injectors in JCB Loadall vehicles. It describes injector components and identification, includes a check procedure using diagnostic tools, and outlines removal and installation steps. Special tools are required for tasks like leak testing and installing injector seals. Torque specifications are provided for tightening injector clamps and sleeves.
Jcb 411 ht, 413s, 417ht wheel loader service repair manual from 2094871 to 20...uudjjekdmme
This service manual provides instructions and technical specifications for JCB machines 411HT, 413S, and 417HT. It contains sections covering the machine, attachments, body, operator station, HVAC, engine, fuel/exhaust systems, cooling, brakes, steering, driveline, hydraulics, and electrical systems. The document reviewed the exhaust system components, including the inlet manifold, outlet manifold, turbocharger, and provided removal and installation instructions as well as checks for condition and proper operation. Health and safety warnings were also provided when working with or around exhaust components.
Jcb 250 t skid steer loader service repair manual sn from 2478301 to 2478700uudjjekdmme
This service manual provides instructions for servicing JCB skid steer loaders and their components. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics and electrical system. The section summarized here provides instructions for removing and installing the crankshaft from the engine. It describes cleaning and inspecting the crankshaft, lists the required tools and consumables, and outlines the step-by-step removal and installation procedures. Safety cautions are provided regarding the weight of the crankshaft and ensuring the engine is cool before working on it.
Jcb 250 t skid steer loader service repair manual sn from 2476302 to 2477300uudjjekdmme
The document provides instructions for removing and installing a crankshaft on an engine. Key steps include: removing components like the drive belt, pulley, oil sump, fuel injectors and pump; positioning the engine upside down; and removing components attached to the crankshaft like the flywheel, gears and camshaft. Cleaning and checking tolerances of the crankshaft journals is also described. The installation procedure reverses the removal steps, with specifics on applying sealant and torquing bolts. Technical specifications are provided for crankshaft dimensions and clearances.
Jcb 9 tst dumper service repair manual sn from grs1346 to grs9572uudjjekdmme
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 9 tst dumper service repair manual sn from grp0854 to grp1363uudjjekdmme
This service manual provides instructions for servicing the braking system of dumpers. It contains information on health and safety when working on the brakes, technical specifications, component identification, troubleshooting, and bleeding the brakes. The braking system uses mineral oil and contains separate front and rear brake circuits for safety. Adjustment is generally not needed as the brakes are self-adjusting, but bleeding may be required if the brake lines leak fluid.
Jcb 5 cx backhoe loader service repair manual sn from 2442701 to 2451000uudjjekdmme
This service manual section provides information on servicing the crankshaft and related components on a backhoe loader. It includes identification of parts, technical specifications, operation descriptions, removal and installation instructions, and check procedures. Proper cleaning and installation of parts is emphasized to ensure correct lubrication and prevent engine failure. Detailed diagrams and torque specifications are provided.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Before doing any service work which requires separating a track, a
thorough inspection of the front track roller frame must be made. See
Special Instruction, Form No. SMHS8273-02
Start By:
a. separate track
2/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. The tractor could fall off the supports when the track roller frames are
removed if it is on a slope or soft footing. To prevent possible personal
injury, the tractor must be on a level, hard surface before the track
roller frames are removed.
1. Put tooling (A), bar stock, in position between the equalizer bar and main frame on the same
side that the track roller frame is to be removed from. This will keep the equalizer bar in its
original position when the track roller frame is removed.
2. Remove the four bolts and panel (1) from the front of the tractor.
3. Raise the rear of the tractor until track guides (2) are above the track links. Put tooling (B) in
position under the tractor as shown. Lower the tractor onto tooling (B).
3/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. 4. Put two 50 ton screw jacks (3) in position, and raise the front of the tractor until track guides (4)
are above the track links.
5. Put tooling (C) in position under the roller frame as shown. Use tooling (C) to put pressure on
the track roller frame.
6. Remove bolt (6) from the equalizer bar pin and the track roller frame. Install tooling (D) on
each side of the pin, between the equalizer bar and the track roller frame as shown.
7. Use tooling (E) and remove equalizer bar pin (5) from the front side of the equalizer bar as
shown. Make sure tooling (D) stays tightly in position while the equalizer bar pin is being
removed.
4/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 8. Remove the bolts and push arm trunnion (7) from the track roller frame.
9. Use tooling (F) and remove retainer (8) from the track roller frame.
10. Fasten chain (11) between the rear track roller frame and the front track roller frame to keep
the front track roller frame in position.
11. The weight of the track roller frame with six rollers and two idlers is 1500 kg (3,300 lb).
Attach a hoist, and use tooling (G) with chain (10) positioned as shown. Raise the track roller
frame, and remove tooling (C).
12. Remove the bolts and plate (9) from the end of the pivot shaft. Remove the washer that is
behind plate (9).
13. Remove the track roller frame by pulling it off the pivot shaft.
5/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 14. Remove seal (13) and sleeve (12) from the pivot shaft.
15. If necessary, remove bearings (14) and (15) from the track roller frame.
Install Track Roller Frames
6/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. 1. Lower the temperature of bearings (14) and (15), and install them in the track roller frame.
Make sure they are flush with the outer edge of the housing surface. The diameter of bearing (14),
after assembly, must be 101.750 ± 0.109 mm (4.006 ± 0.004 in). The diameter of bearing (15),
after assembly, must be 165.440 ± 0.239 mm (6.513 ± 0.009 in).
2. Heat sleeve (12) to a maximum temperature of 232° C (450° F) and install it on the pivot shaft.
Install seal (13) on the sleeve. Put 5P3975 Rubber Lubricant on the seal and the seal bore in the
track roller frame.
3. Attach chain (11) between the front roller frame and the rear roller frame. Attach chain (10) to
the rear roller frame as shown. Attach chain (10) to tooling (G) and a hoist. Put the track roller
frame in position on the pivot shaft.
7/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. 4. Put washer (16) in position. Put plate (9) in position on the end of the pivot shaft, and install the
bolts that hold it.
5. Put tooling (C) in position under the track roller frame. Remove the hoist, tooling (G) and
chains (10) and (11).
6. Use tooling (C) to raise or lower the track roller frame. Align the equalizer bar pin bore with the
track roller frame bores. Put 2P2506 Thread Lubricant on equalizer bar pin (5) and install it in
the bores. Install bolt (6) that holds the equalizer bar pin.
7. Remove tooling (C) from under the track roller frame.
8/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 8. Install the seal in retainer (8) and put clean SAE 30 oil on the seal.
9. Use tooling (F) to install retainer (8) in the track roller frame until it is flush with the surface of
the track roller frame.
10. Use tooling (H) to install the retainer until it is against plate on the end of the pivot shaft.
11. Put trunnion (7) in position and install the bolts that hold it.
12. Remove plug (17) from the track roller frame. Fill the pivot shaft compartment with clean
SAE 30 oil until it is full. Install plug (17).
13. Raise the rear of the tractor and remove tooling (B). Lower the rear of the tractor.
14. Lower the front of the tractor, and remove the two 50 ton jacks.
15. Remove tooling (A), (bar stock), that is between the equalizer bar and the frame rail.
9/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. 16. Put panel (1) in position, and install the four bolts that hold it.
NOTE: The recoil spring compartment and recoil bearing compartment must be checked with the
track installed and the correct track adjustment made before the oil level can be checked.
17. If the oil from the recoil spring compartment and recoil bearing compartment was drained, fill
the compartments with oil to the correct level. See the Operation And Maintenance Guide for the
correct oil and capacity.
End By:
a. connect track
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Mar 1 08:57:32 UTC+0800 2020
10/10D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) ...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6H TRACK-TYPE TRACTOR 6FC
Configuration: D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
D6H TRACTOR POWER TRAIN
Media Number -SENR3242-03 Publication Date -01/11/2004 Date Updated -10/01/2017
SENR32420009
Idlers
SMCS - 4159-010; 4159-015; 4159-016
Remove And Install Idlers
Start By:
a. separate track
1. The weight of idler (1) is 143 kg (315 lb). Fasten a hoist and tool (A) to idler (1) remove two
bolts (3) and washers from each side of the idler.
2. Remove one cap (2) from each side.
3. Lower idler (1) slightly and remove.
1/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. NOTE: It may be necessary to raise the front of the roller frame with a small jack to provide
clearance to remove the roller.
4. Remove one block (4) from each side.
NOTE: The following steps are for installation of the idler.
5. Fasten a hoist and tool (A) to idler (1). Put one block (4) on each side of the idler in position on
the dowel.
NOTICE
The hole in idler shaft (5) must be aligned with pin (6) in cap (2).
6. Put the idler in position on roller frame. Align the hole in idler shaft (5) with pin (6) in cap (2).
Install cap (2) with bolts (3) and washers. Tighten the bolts to a torque of 475 ± 50 N·m (350 ± 37
lb ft). Remove tooling (A).
End By:
a. connect track
Disassemble Idlers
Start By:
a. remove idlers
1. Use a slow speed drill and a 12.7 mm (.50 in) drill bit, and remove plug (4) and stopper (3)
from the end of the shaft.
2/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. NOTICE
The shaft will be free to fall when the retainers are removed.
2. Remove 12 bolts (2) and retainer (1) from both sides of the idler.
3. Remove O-ring seal (6) from retainer (1).
NOTE: If the Duo-Cone seals are to be used again, put identification marks on the seals so they
can be assembled and installed in their original position.
4. Put identification marks on the Duo-Cone seal. Remove Duo-Cone seal (5) from retainer (1).
5. Put identification marks on Duo-Cone seal (7). Remove Duo-Cone seal (7) and toric stabilizer
(8) from shaft (9).
6. Pull shaft (9) out of the idler and remove the shaft.
Assemble Idlers
3/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Use caution when using isopropyl alcohol. Follow the manufacturer's
recommendations on the container when using isopropyl alcohol.
1. Clean and inspect all parts for wear or damage. Replace all parts that are worn or damaged.
2. Make sure all parts are free of oil film, dust or other foreign material. Use isopropyl alcohol and
a clean cloth or paper for cleaning.
NOTICE
The bearing in idler assembly (1) can be damaged when shaft (2) is
installed in the idler.
3. Carefully put shaft (2) in position in idler assembly (1).
4/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 4. Put toric stabilizers (3) in position on both ends of shaft (2).
NOTE: See Installation of Duo-Cone Floating Seals before installation of any of the Duo-Cone
seals.
5. Put toric ring (4) in position in seal ring (5). Make sure the toric ring is straight in seal ring (5).
6. Put ring (4) and seal ring (5) in isopropyl alcohol until the entire toric ring is wet.
7. Use tool (A) to install the toric ring and seal ring (5) on shaft (2). Install the rings until tool (A)
makes contact with the end of shaft (2).
8. Use a depth micrometer (6) to measure the distance between seal ring (5) and the shaft at four
locations 90° apart. The difference in these measurements must not be more than 0.80 mm (.031
in).
9. If adjustments to seal ring (5) are necessary, use tool (A) to adjust the seal ring on the shaft.
5/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. 10. Repeat Steps 5 through 9 to install the toric ring and seal ring on the other side of the idler.
11. Put O-ring seal (8) in position on seal ring (7). Make sure the O-ring seal is straight on the seal
ring.
12. Lubricate the O-ring seal on the seal ring with isopropyl alcohol.
13. Put the O-ring seal and seal ring (7) in position on retainer (9). Use tool (A) and an arbor press
to install the seal ring in the retainer. Install the O-ring seal and seal ring until the O-ring seal
makes contact with the bottom of the retainer.
14. Use depth micrometer (6) to measure the distance from the surface of retainer (9) to the
surface of seal ring (7) at four locations 90° apart. The difference in these measurements must not
be more than 0.30 mm (.012 in).
15. If adjustments to the seal ring are necessary, use tool (A) to adjust the seal ring in the retainer.
6/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 16. Put O-ring seal (10) in position in the groove in retainer (9).
17. Put Vaseline or grease on O-ring seal (10) to hold it in place on the retainer.
18. Make sure the faces of the seal rings are clean and free of any foreign material.
19. Put a thin film of clean oil on the faces of the seal rings.
20. Put tool (B) in position in the bores of retainer (9) and the seal ring. Use tool (B) to put the seal
ring and retainer (9) in their original position on the idler assembly.
21. Use tool (B) to hold the seal ring and retainer (9) in the correct position on the idler assembly.
22. Install bolts (11). Tighten the bolts evenly to keep retainer (9) in alignment with the idler
assembly.
23. Tighten bolts (11) to a final torque of 55 ± 7 N·m (41 ± 5 lb ft).
24. Repeat Steps 11 through 23 to install the retainer on the other side of the idler.
25. Put clean oil on the outside of stopper (12). Install the stopper in one end of shaft (2). Install
the stopper until it is 10 ± 4 mm (.393 ± .16 in) below the surface of the end of shaft (2).
26. Use tool (C) to install plug (13) in stopper (12). Install the plug so it is even with the end of the
stopper.
7/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 27. Use tool (D) to pressure test the idler assembly as follows:
a. Put air (free of water) under a pressure of 280 kPa (41 psi) into the idler shaft.
b. If there is a pressure reduction in ten seconds or less, there is a leak in the idler assembly. The
idler assembly must be disassembled and checked.
28. Use tool (E) to check the end play of shaft (2). The end play must be 0.25 to 0.85 mm (.010
to .034 in).
29. Fill idler shaft (2) with 540 ± 12 mL (18.4 ± .4 oz) of SAE 30 oil.
30. Put clean oil on stopper (14). Install the stopper in the end of shaft (2). Install the stopper until
it is 10 ± 4 mm (.393 ± .16 in) below the surface of the end of the shaft.
31. Use tool (C) to install the plug in stopper (14). Install the plug so it is even with the end of the
stopper.
End By:
a. install idler
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun Mar 1 08:58:21 UTC+0800 2020
8/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6H TRACK-TYPE TRACTOR 6FC
Configuration: D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) POWERED BY 3306 ENGINE
Disassembly and Assembly
D6H TRACTOR POWER TRAIN
Media Number -SENR3242-03 Publication Date -01/11/2004 Date Updated -10/01/2017
SENR32420010
Equalizer Bar
SMCS - 7206-012; 7206-017; 7206-011
Remove Equalizer Bar
1/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Start By:
a. remove track roller frame
1. Put tooling (A) in position under the side of the equalizer bar that the track roller frame was not
removed. Push the side of the equalizer bar up and remove bar stock (1), that was installed between
the frame and the equalizer bar, when the track roller frame was removed.
2/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. 2. Put enough wooden blocks (2) under the track roller frame so that when tooling (A) is removed,
the equalizer bar does not make contact with the frame on the side that the track roller frame was
removed. Remove tooling (A).
3. Remove retaining bolt (3). Install tooling (B) onto the pin. Make sure the FT1713 Wedges [part
of tooling (B)] are put in position between the equalizer bar and the saddle to prevent the pin from
binding as it is removed. Use tooling (B) and remove the equalizer bar pin.
4. Put the FR1713 Wedges [part of tooling (D)] in between the equalizer bar and the saddle to
prevent the pin from binding as it is removed.
3/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. 5. Remove three bolts (4) and the retainer plate.
6. The weight of the equalizer bar is 143 kg (315 lb). Put tooling (C) in position under the equalizer
bar and fasten wire (5) to tooling (C) so the equalizer bar will not fall when it is removed.
7. Install tooling (D) and remove the equalizer bar center pin. Remove tooling (D).
8. Lower the equalizer bar with tooling (C). Remove spacer (6) from each side of the equalizer bar
and remove the bar from under the machine.
Install Equalizer Bar
1. Position the equalizer bar on tooling (C). Fasten the equalizer bar with wire (5) to tooling (C).
Put the equalizer bar in position under the machine.
4/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 2. Put a small amount of 5P960 Multipurpose Type Grease on the two lip seals and on the center
equalizer bar bearing.
3. Put two spacers (6) in position, one on each side of the equalizer bar.
4. Put the equalizer bar in position in the equalizer bar saddle with tooling (C).
NOTICE
The 2P2506 Anti-Seize Compound should not be permitted to get into
the bearing area of the equalizer bar.
5. Put 2P2506 Anti-Seize Compound into the front bore of the equalizer bar saddle and on the rear
diameter of equalizer bar center pin (7).
6. Align the bores in the equalizer bar saddle with the bore in the equalizer bar. Install equalizer bar
center pin (7). Make sure the flats on the end of the pin are horizontal so the retainer plate can be
installed properly.
7. Put the retainer plate in position and install three bolts (4). Remove wire (5) and tooling (C).
5/8D6H & D6H LGP TRACTORS / POWER SHIFT / 6FC00001-03999 (MACHINE) P...
2020/3/1https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...