The document provides instructions for removing and installing various engine components on a Caterpillar 3408 industrial engine, including the oil cooler, oil filter base, oil bypass valves, engine oil cooler/lines, aftercooler, and turbocharger. The procedures describe removing bolts, hoses, seals, and other parts, cleaning components, applying sealant, and reinstalling parts in reverse order.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
2. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820004
Engine Oil Cooler (Industrial Engine)
SMCS - 1378-011; 1378-012
Remove Engine Oil Cooler (Industrial Engine)
START BY:
a. remove oil filter base
1. Remove breather tube (3). Remove bracket (1) that holds the oil level gauge.
2. Remove bolts (2) that hold bonnet (4) to the engine block.
3. Remove oil cooler and bonnet (4) as a unit.
1/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 4. Remove bonnet (4) and adapter (6) from oil cooler (5). Remove the O-ring seals from bonnet
(4) and adapter (6).
5. Clean the tube bundles in the engine oil cooler with a 3.18 mm (.125 in.) diameter rod.
6. Remove bolts (9). Remove clamp (8) and elbow (7).
7. Remove four bolts (10). Remove bonnet (11).
Install Oil Cooler (Industrial Engine)
1. Put bonnet (1) in position. Install bolts (4).
2. Install elbow (2) and clamp (3).
2/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 3. Put clean engine oil or glycerine on the O-ring seals for the adapter. Install the O-ring seals on
the adapter.
4. Install adapter (8) and bonnet (6) on oil cooler (7).
5. Put the oil cooler into position. Install the spacer and gasket between bonnet (6) and cylinder
block (5). Install the bolts that hold bonnet (6) to the cylinder block.
6. Install bracket (10) that holds the oil level gauge.
7. Install breather tube (9).
END BY:
a. install oil filter base
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 19 13:28:10 UTC+0800 2020
3/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820005
Oil Filter Base (Marine Engine)
SMCS - 1306-011; 1306-012
Remove Oil Filter Base (Marine Engine)
1. Remove oil filters (1) with tool (A).
2. Remove elbow (2).
3. Remove bolts (3) and bolts (4). Remove filter base (5).
1/2
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 4. Separate the filter bases. Remove the bypass valve if necessary. Remove studs (6).
Install Oil Filter Base (Marine Engine)
1. Assemble the oil filter bases as shown. If studs (4) were removed, install them in the correct
locations, and tighten them to a torque of 25 ± 4 N·m (18 ± 3 lb.ft.). Install the bypass valve in
location (1).
2. Put 9S3263 Thread Lock on the last 10.2 mm (.40 in.) of threads on studs (5). Tighten the studs
to a torque of 80 ± 14 N·m (60 ± 10 lb.ft.).
3. Put clean engine oil or glycerine on O-ring seals (3). Install seals (3) on tube (2). Install tube (2)
on the filter base.
4. Put filter base (8) in position on the engine. Install bolts (6) and bolts (7).
5. Install elbow (9).
6. Install two new oil filters according to the instructions on the filters.
7. Check the engine oil for the correct level.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 19 13:29:05 UTC+0800 2020
2/2
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820006
Oil Bypass Valves (Marine Engine)
SMCS - 1314-011; 1314-012
1/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Install Oil Bypass Valves (Marine Engine)
1. Install plunger (1) and spring (2) for the cooler bypass valve. Install the cover, bolt and clamp (5).
2. Install plunger (4) and spring (3) for the filter bypas valve. Install the cover for the filter bypass
valve.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 19 13:30:01 UTC+0800 2020
3/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820007
Engine Oil Cooler And Cooler Lines (Marine Engine)
SMCS - 1378; 1380-012; 1380-011
Remove Engine Oil Coolers And Cooler Lines (Marine
Engine)
START BY:
a. remove oil filter base (marine engine)
1. Remove the bolts from elbows (1) and (6). Remove elbow (1), cooler (3) and elbow (6).
2. Remove the bolts from body (2) and elbow (5). Remove body (2), tube (4) and elbow (5).
3. Disconnect line (7). Remove bolts (9) from bonnet (8).
1/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 4. Remove the bolts from the elbow on the front end of cooler (10). Remove the elbow, cooler
(10) and bonnet (8).
5. Clean the tube bundles for both the engine oil cooler and marine cooler with a 3.18 mm (.125
in.) diameter rod as shown.
Install Engine Oil Coolers And Cooler Lines (Marine Engine)
1. Put clean engine oil or glycerine on the O-ring seals for bonnet (5), elbow (3), tube (8), elbow
(6), elbow (9) and on the bores of cooler (2), body (1), elbow (4) and cooler (7).
2. Install bonnet (5), cooler (2) and elbow (3) on the side of the engine block. Connect the water
line to bonnet (5).
3. Install body (1), tube (8) and elbow (4) below the engine oil cooler.
4. Install marine cooler (7), elbow (6) and elbow (9).
END BY:
a. install oil filter base (marine engine)
2/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820008
Aftercooler
SMCS - 1063-011; 1063-012
1/4
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Remove Aftercooler
1. Drain the coolant from the aftercooler core and elbows (4).
2. Remove dampers (2) that hold the fuel injection lines.
3. Remove four bolts (1).
4. Remove bolts (3) from the aftercooler cover. Remove the aftercooler cover.
5. Remove two elbows (4) and the sleeve.
6. Remove adapters (5) and adapters (6) from the aftercooler housing.
7. Remove bolts (7). Remove aftercooler core (8).
Install Aftercooler
2/4
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 1. Put clean engine oil or glycerine on O-ring seals (1).
2. Put the aftercooler core in position on the aftercooler housing. Install the bolts that hold the core
to the aftercooler housing.
3. Put clean engine oil or glycerine on O-ring seals (4). Install adapters (3) and adapters (2) in the
aftercooler housing.
4. Put clean engine oil or glycerine on O-ring seals (7). Install sleeve (6).
5. Install elbows (5).
6. Put the aftercooler cover in position on the aftercooler housing. Install bolts (8) and bolts (9).
3/4
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 7. Install dampers (11) for the fuel injection lines. Tighten bolts (10) to a torque of 9.6 ± 2.8 N·m
(84 ± 24 lb.in.).
8. Fill the cooling system to the correct level. See the Maintenance Guide.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 19 13:31:53 UTC+0800 2020
4/4
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820009
Turbocharger (Industrial Engine)
SMCS - 1052-011; 1052-012
Remove Turbocharger (Industrial Engine)
1. Disconnect oil supply line (1) and drain line (3) from the turbocharger.
2. Remove four bolts (2) at the inlet of the aftercooler.
3. Loosen nut (4) on the oil supply line. Remove the bolts from clamps (5). Move supply line (1)
to the side.
1/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 4. Remove nuts (8) and bolts (9) that hold the turbocharger and exhaust elbow to the exhaust
manifold.
5. Remove exhaust elbow (6) and bracket (7) as a unit.
6. Remove turbocharger (11) and pipe (10).
7. Remove pipe (10) from the turbocharger.
Install Turbocharger (Industrial Engine)
1. Put gasket (1) into position on exhaust manifold (2).
2/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 2. Put clean engine oil or glycerine on the O-ring seals of pipe (3). Install pipe (3) on turbocharger
(4).
3. Install turbocharger (4) on exhaust manifold (2).
4. Install exhaust elbow and bracket (5). Put 5P3931 Anti-Seize Compound on the studs and bolts
that hold the turbocharger and exhaust elbow to manifold (2). Tighten the nuts to a torque of 55 ±
5 N·m (41 ± 4 lb.ft.).
5. Connect oil supply line (7) and drain line (9) to the turbocharger. Put 5P3931 Anti-Seize
Compound on the bolts that hold the oil lines.
6. Install bolts (6) at the inlet of the aftercooler.
7. Install two bolts for clamps (8).
8. Tighten nut (10) on the oil supply line.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 19 13:32:48 UTC+0800 2020
3/3
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. Shutdown SIS
Previous Screen
Product: ARTICULATED TRUCK
Model: D44B ARTICULATED TRUCK 8SD
Configuration: D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY 3408 ENGINE
Disassembly and Assembly
3408 & 3408B INDUSTRIAL AND MARINE ENGINES
Media Number -SENR7382-02 Publication Date -01/12/1985 Date Updated -05/01/2016
SENR73820010
Turbocharger (T12)
SMCS - 1052-015; 1052-016
1/9
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. START BY:
a. remove turbocharger (T12)
1. Install the turbocharger on tool (A).
2. Put alignment marks on the housings for correct installation at assembly.
3. Loosen clamp (1). Remove compressor housing (2). Remove the clamp.
4. Remove bolts (3), locks (6) and plates (5).
5. Remove the center section from turbine housing (4).
6. Install tool (C) in tool (B). Install the center section in tool (C) as shown.
NOTICE
When nut (7) is loosened, do not put side force on the shaft. The shaft
may bend.
3/9
D44B ARTICULATED DUMP TRUCK 8SD00001-UP (MACHINE) POWERED BY...
2020/2/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...