The document provides instructions for removing and installing the final drive planetary carrier on a D11R track-type tractor. It describes using various tools to lift and support the heavy components. The removal process involves removing bolts, installing lifting brackets, and using hydraulic tools to separate the carrier from the final drive. Precautions are listed for containing fluids during disassembly.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11R TRACK-TYPE TRACTOR AAF
Configuration: D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3508B Engine
Disassembly and Assembly
D11R Track-Type Tractor
Media Number -SENR1782-09 Publication Date -01/09/2014 Date Updated -03/09/2014
i05668450
Axle - Remove
SMCS - 3278-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-7395 Installer 1
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1/2
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00523316
1. Remove bolts (1) and remove cover (2) .
2. Remove the O-ring seal from cover (2) .
Illustration 2 g00523317
3. Install Tooling (A) on the outer axle. Fasten a suitable lifting device to Tooling (A) . Use
Tooling (A) with the lifting device and remove outer axle (3) from the machine. The weight
of the outer axle is 48 kg (105 lb).
4. Install Tooling (A) on the inner axle. Use Tooling (A) with the hoist and remove the inner
axle from the machine. The weight of the inner axle is approximately 28 kg (62 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 12 11:13:37 UTC+0800 2020
2/2
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11R TRACK-TYPE TRACTOR AAF
Configuration: D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3508B Engine
Disassembly and Assembly
D11R Track-Type Tractor
Media Number -SENR1782-09 Publication Date -01/09/2014 Date Updated -03/09/2014
i02110106
Axle - Install
SMCS - 3278-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-7395 Installer 1
Illustration 1 g00523317
1. Install Tooling (A) on the inner axle. Fasten a suitable lifting device to Tooling (A). Align
the splines on the inner axle with the splines in the bevel gear and install the inner axle.
2. Use a suitable lifting device with Tooling (A) and install outer axle (3) .
1/2
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00523316
3. Install the O-ring seal in cover (2). Put cover (2) in position on the final drive and install
bolts (1) that hold the cover in place.
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and proper
filling procedures.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 12 11:14:27 UTC+0800 2020
2/2
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11R TRACK-TYPE TRACTOR AAF
Configuration: D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3508B Engine
Disassembly and Assembly
D11R Track-Type Tractor
Media Number -SENR1782-09 Publication Date -01/09/2014 Date Updated -03/09/2014
i02110108
Final Drive Planetary Carrier (In Chassis) - Remove
SMCS - 4092-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
142-1664 Lifting Bracket Gp 1
5P-8732 Bracket 1
5P-8622 Shackle 1
5P-7284 Plate 1
2J-3507 Full Nut 3
2H-3745 Bolt 4
3K-5234 Hard Washer 4
B
1U-7432 Adapter 1
6V-3009 Crossbar 1
5P-8247 Hard Washer 1
4K-0367 Full Nut 1
Threaded Rod 5/8 inch by 17 inches 1
C
9U-6600 Hand Hydraulic Pump 1
6V-3175 Double Acting Cylinder 1
D 3H-0467 Puller Washer 1
1/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. E
142-1664 Lifting Bracket Gp 1
5P-8732 Bracket 1
5P-8622 Shackle 1
5P-7284 Plate 1
2H-3745 Bolt 1
3K-5234 Hard Washer 1
8S-9906 Ratchet Puller Gp 1
F 138-7575 Link Bracket 3
Start By:
A. Remove the axles.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00557003
2/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Do not remove two of bolts (1) that hold the planetary carrier to the
final drive.
1. Remove 34 bolts (1) that hold the planetary carrier to the final drive carrier.
Illustration 2 g00526526
2. Loosen two bolts (1) that were not removed approximately 25.4 mm (1 inch).
3. Install three 1/2 inch - 13 NC forcing screws (2) in planetary carrier (3). Tighten the forcing
screws evenly until the planetary carrier is against the bolts.
3/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 3 g00526527
4. Adjust bolts (4) on Tooling (A) until dimension (X) is 168.4 mm (6.63 inch) and dimension
(Y) is 201.2 mm (7.92 inch).
Illustration 4 g00526528
Illustration 5 g00526530
5. Fasten a suitable lifting device to Tooling (A). Put Tooling (A) in position on the planetary
carriers, as shown.
6. Use three bolts (5) that were removed from the planetary carriers to install Tooling (A).
Install a nut (6) on each bolt in order to hold Tooling (A) to the planetary carrier.
7. Install guide pins (7) and remove bolts (1) .
4/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 6 g00526531
Illustration 7 g00526533
8. Install Tooling (B) in order to hold the sun gear in position in planetary carrier (3) .
9. Remove the planetary carrier from the final drive. The weight of the planetary carrier is
approximately 603 kg (1330 lb).
Note: In order to disassemble the planetary carrier, refer to the Power Train, Disassembly
and Assembly, "Final Drive - Disassemble".
5/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 8 g00526534
10. Remove Tooling (B) and sun gear (8) from the planetary carrier.
Illustration 9 g00526536
11. Remove thrust ring (9) from retainer (10) .
Illustration 10 g00526537
12. Install Tooling (C) under the final drive hub in order to hold the final drive hub in position
when retainer (10) is removed.
13. Install Tooling (D) in order to hold gear (11) in position when retainer (10) is removed.
Make sure Tooling (C) and (D) are in position to hold the hub and ring
gear in place when retainer (10) is removed.
6/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 14. Remove bolts (12) and retainer (10) from the final drive.
Illustration 11 g00526539
15. Remove thrust bearing (13) from retainer (10) .
Illustration 12 g00526541
16. Remove twenty pins (14) from the hub.
17. If necessary, remove seal (15) from the hub.
7/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 13 g00526542
18. Fasten a suitable lifting device to Tooling (E). Put Tooling (E) in position in gear (11), as
shown.
19. Remove Tooling (D) from the final drive. Use Tooling (E) in order to remove gear (11) and
hub (16) as an assembly. The weight of the gear and hub is approximately 286 kg (630 lb).
Illustration 14 g00526543
20. Fasten a suitable lifting device and Tooling (F) to hub (16). Remove ring (17) and remove
the hub from gear (11). The weight of the hub is approximately 84 kg (185 lb).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Feb 12 11:15:16 UTC+0800 2020
8/8
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11R TRACK-TYPE TRACTOR AAF
Configuration: D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3508B Engine
Disassembly and Assembly
D11R Track-Type Tractor
Media Number -SENR1782-09 Publication Date -01/09/2014 Date Updated -03/09/2014
i02110109
Final Drive Planetary Carrier (In Chassis) - Install
SMCS - 4092-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
142-1664 Lifting Bracket Gp 1
5P-8732 Bracket 1
5P-8622 Shackle 1
5P-7284 Plate 1
2J-3507 Full Nut 3
2H-3745 Bolt 4
3K-5234 Hard Washer 4
B
1U-7432 Adapter 1
6V-3009 Crossbar 1
5P-8247 Hard Washer 1
4K-0367 Full Nut 1
Threaded Rod 5/8 inch by 17 inches 1
C
9U-6600 Hand Hydraulic Pump 1
6V-3175 Double Acting Cylinder 1
D 3H-0467 Puller Washer 1
1/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. E
142-1664 Lifting Bracket Gp 1
5P-8732 Bracket 1
5P-8622 Shackle 1
5P-7284 Plate 1
2H-3745 Bolt 1
3K-5234 Hard Washer 1
8S-9906 Ratchet Puller Gp 1
F 138-7575 Link Bracket 3
G 1P-0520 Driver Gp 1
Illustration 1 g00526543
1. Fasten a suitable lifting device and Tooling (F) to hub (16). Put the hub in position in gear
(11). Install ring (17) .
Illustration 2 g00526542
2/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 2. Put gear (11) and hub (16) in position in the final drive as an assembly with Tooling (E) .
3. Install Tooling (D) in order to hold the hub and gear in place in the final drive.
Illustration 3 g00526541
Note: Use a driver that is nearly the same diameter as the outside diameter of the metal seal
case. Do not use excessive force on a fully seated seal. Excessive force may deform the seal
case. Deforming the seal case may cause the seal to leak.
4. Use Tooling (G) and install seal (15) in the hub with the lip of the seal toward the inside, as
shown.
5. Install 20 pins (14) in the hub.
Illustration 4 g00526539
6. Install thrust bearing (13) in retainer (10) .
3/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 5 g00526537
7. Put retainer (10) in position and install bolts (12). Tighten bolts (12) to a torque of 135 ± 20
N·m (100 ± 15 lb ft).
8. Remove Tooling (C) and (D) .
Illustration 6 g00526548
NOTICE
There must be metal to metal contact between the final drive hub and
retainer (10) .
9. Use a feeler gauge and measure the gap between the pins in hub (16) and retainer (10). The
distance between the pins and retainer (9) should be 0.08 ± 0.05 mm (.003 ± .002 inch).
4/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 7 g00526536
10. Install bearing (9) in retainer (10) .
Illustration 8 g00526534
11. Install Tooling (B) in order to hold sun gear (8) in position in the planetary carrier.
Illustration 9 g00526533
5/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 10 g00526531
12. Fasten a suitable lifting device and Tooling (A) to planetary carrier (3) .
13. The O-ring seals must be in position on the planetary carrier and in the final drive hub.
Note: The drain plug on the planetary carrier must be aligned with the small O-ring seal in
the final drive hub.
14. Align the planetary carrier gears with the gear in the final drive.
15. Install three bolts in order to hold the planetary carriers in position when Tooling (A) is
removed.
16. Remove Tooling (A) and (B) .
Illustration 11 g00557003
17. Install the remaining bolts (1). Tighten bolts (1). Tighten bolts (1) to a torque of 1050 ± 150
N·m (775 ± 110 lb ft).
Note: Refer to the Operation and Maintenance Manual for all fluid capacities and proper
filling procedures.
End By: Install the axles.
6/7
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
21. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D11R TRACK-TYPE TRACTOR AAF
Configuration: D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3508B Engine
Disassembly and Assembly
D11R Track-Type Tractor
Media Number -SENR1782-09 Publication Date -01/09/2014 Date Updated -03/09/2014
i07111999
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
142-1664 Lifting Bracket Gp 1
142-1666 Plate 1
5P-8622 Shackle 1
7F-4283 Bolt 2
2H-3745 Bolt 4
7F-5227 Bolt 2
3K-5234 Hard Washer 4
Start By:
a. Separate the track. Refer to Disassembly and Assembly, "Track-Separate".
b. Remove the outer axles. Refer to Disassembly and Assembly, "Axle-Remove".
c. If necessary remove the ladder. Refer to Disassembly and Assembly, "Ladder- Remove".
NOTICE
1/4
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the machine. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide", for tools and supplies suitable to collect and contain
fluids in Caterpillar machines.
Dispose of all fluids according to local regulations and mandates.
1. Drain the oil from transmission and the bevel gear housing. Refer to Operation and
Maintenance Manual, "Transmission Oil - Change".
Illustration 1 g00526582
2. Adjust bolts (1) on Tooling (A) until dimension (X) is 127 mm (5.0 inch) and dimension
(Y) is 156.7 mm (6.17 inch).
2/4
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 2 g00526589
3. Remove five bolts (2) from the sprocket segments.
Illustration 3 g00526727
4. Fasten a suitable lifting device to Tooling (A) and install Tooling (A) on final drive (3).
Adjust two bolts (4) until the head of bolts (4) are against final drive (3).
Illustration 4 g00526730
NOTICE
Do not remove three bolts (5) that hold the steering clutch and brake to
the frame.
5. Remove bolts (7) that hold the final drive, the steering clutch, and the brake to the frame.
6. Remove three bolts (6) that hold the final drive to the steering clutch and brake. Remove the
final drive from the machine. The weight of the final drive is approximately 2211 kg
(4874 lb).
Wed Feb 12 11:16:54 UTC+0800 2020
3/4
D11R Carrydozer Track-Type Tractor AAF00001-UP (MACHINE) POWERED BY 3...
2020/2/12
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...