The document provides instructions for removing and installing a secondary steering pump and electric motor on a Caterpillar 962K wheel loader. It outlines 28 steps for disassembly of the pump which include removing valves, spools, plugs, springs and other components. The assembly section lists 34 steps for reinstalling the parts in reverse order and adjusting axial shaft end play clearance.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962K WHEEL LOADER FLL
Configuration: 962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950K and 962K Wheel Loaders Machine Systems
Media Number -KENR5805-00 Publication Date -01/10/2011 Date Updated -03/10/2011
i04552398
Piston Pump (Steering) - Disassemble
SMCS - 4306-015; 5070-015-ZH
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the steering pump.
Illustration 1 g01145338
1/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 1. Remove bolts (1) and valve (2) .
Illustration 2 g01145339
2. Remove O-ring seals (3) from valve (2) .
Illustration 3 g01145340
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Remove plug (4), the O-ring seals, plug (5), and plug (6) .
2/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 4 g01145341
4. Remove spool (7) and spool (8) .
5. Remove the O-ring seals from plug (5) and plug (6) .
Illustration 5 g01145342
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
6. Remove adjustment screw (9) and adjustment screw (10) .
3/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 6 g01145354
7. Remove retainer (14), spacer (13), spring (12), and retainer (11) .
8. Remove retainer (17), spring (16), and retainer (15) .
9. Remove the O-ring seals from adjustment screw (9) and adjustment screw (10) .
Illustration 7 g01145355
10. Remove bolts (18) and elbow (19) .
4/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 8 g01145356
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
11. Remove bolts (20) and head (21) .
Illustration 9 g01145522
12. Remove plate (22) .
5/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g01145523
13. Remove bearing cup (23) and pin (24) .
Note: Place the steering pump on suitable blocks, as shown.
Illustration 11 g01145357
14. Remove bearing cone (26) and gasket (25) .
Illustration 12 g01145358
6/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. 15. Remove shim (28) and barrel assembly (29) .
16. Remove spring (27) and piston (30) .
Illustration 13 g01145359
Illustration 14 g01145360
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
17. Use Tooling (A) and a suitable press to disassemble barrel assembly (29) .
7/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. a. Compress spring (31) until Tooling (A) is below retaining ring (33) .
b. Remove retaining ring (33) and slowly release the spring tension.
c. Remove spring (31) and washers (32) .
Illustration 15 g01145361
18. Remove bolts (34) and cover (35) .
19. Remove plug (36) .
Illustration 16 g01145362
20. Remove O-ring seal (38) from the cover. Remove O-ring seal (39) from the plug.
21. Remove shaft (37) .
8/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 17 g01145365
22. Remove bolts (40) and two spacer plates (41) .
23. Remove pistons (42) and the plate.
Illustration 18 g01145366
24. Remove spacer plates (43) and swashplate (44) .
Illustration 19 g01145367
9/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 25. Remove bearing cone (45) .
Illustration 20 g01145368
26. Use Tooling (B) in order to remove retaining ring (46) and seal (47) .
Illustration 21 g01145369
27. Remove bearing cup (48) .
28. Remove screws (50). Remove bearings (49) and (51) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 2 12:14:52 UTC+0800 2020
10/10
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SE...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962K WHEEL LOADER FLL
Configuration: 962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950K and 962K Wheel Loaders Machine Systems
Media Number -KENR5805-00 Publication Date -01/10/2011 Date Updated -03/10/2011
i04552403
Piston Pump (Steering) - Assemble
SMCS - 4306-016; 5070-016-ZH
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
B 1P-1861 Retaining Ring Pliers 1
Illustration 1 g01145369
1. Lower the temperature of bearing cup (48) .
2. Install bearing cup (48) .
1/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. 3. Install bearings (49) and (51) .
4. Install screws (50) .
Illustration 2 g01145368
5. Install seal (47) .
6. Use Tooling (B) in order to install retaining ring (46) .
Illustration 3 g01145367
7. Install bearing cone (45) .
2/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 4 g01145366
8. Install swashplate (44) and spacer plates (43) .
Illustration 5 g01145365
9. Install pistons (42) and the plate.
10. Install bolts (40) and two spacer plates (41) .
Illustration 6 g01145362
3/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 11. Install O-ring seal (38) onto the cover. Install O-ring seal (39) onto the plug.
12. Install shaft (37) .
Illustration 7 g01145361
13. Install cover (35) and bolts (34) .
14. Install plug (36) .
Illustration 8 g01145359
4/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 9 g01145360
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
15. Use Tooling (A) and a suitable press to assemble barrel assembly (29) .
a. Install spring (31) and washers (32) .
b. Compress spring (31) until Tooling (A) is below retaining ring (33) .
c. Install retaining ring (33) and slowly release the spring tension.
Illustration 10 g01145358
16. Install barrel assembly (29) and shim (28) .
5/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 17. Install spring (27) and piston (30) .
Illustration 11 g01145357
18. Install bearing cone (26) and gasket (25) .
Illustration 12 g01145523
19. Install bearing cup (23) and pin (24) .
6/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 13 g01145522
20. Install plate (22) .
Illustration 14 g01145356
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
21. Install head (21) and bolts (20) .
22. Tighten bolts (20) to a torque of 91 ± 4 N·m (67 ± 3 lb ft).
7/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 15 g01145355
23. Install elbow (19) and bolts (18) .
Illustration 16 g01145354
24. Install the O-ring seals onto adjustment screw (9) and adjustment screw (10) .
25. Install retainer (15), spring (16), and retainer (17) .
26. Remove retainer (11), spring (12), spacer (13), and retainer (14) .
Illustration 17 g01145342
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
8/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. 27. Install adjustment screw (9) and adjustment screw (10) .
Illustration 18 g01145341
28. Install spool (7) and spool (8) .
29. Install the O-ring seals onto plug (5) and plug (6) .
Illustration 19 g01145340
30. Install the O-ring seal, plug (4), plug (5), and plug (6) .
9/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. 34. Use a dial indicator to check the axial shaft end play. Put the dial indicator on the end of the
shaft and pull on the shaft.
The correct axial shaft end play is 0.010 to 0.10 mm (0.0004 to 0.004 inch). Use the correct
shim to achieve this dimension.
End By: Install the steering pump.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 2 12:15:48 UTC+0800 2020
11/11
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SE...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962K WHEEL LOADER FLL
Configuration: 962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950K and 962K Wheel Loaders Machine Systems
Media Number -KENR5805-00 Publication Date -01/10/2011 Date Updated -03/10/2011
i04560022
Secondary Steering Pump and Electric Motor - Remove and
Install
SMCS - 4324-010-SE; 4324-010; 4324-010-GT; 4324-010-MW; 4325-010-SE; 5073-010-SST
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Start By:
A. Remove the axle oil cooler (if equipped).
B. Remove power train guard.
1. Release the hydraulic system pressure.
2. Turn the battery disconnect switch to the OFF position.
1/3
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 1 g02622290
3. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A).
Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the
hydraulic system.
Illustration 2 g02726440
4. Disconnect ground strap (1).
5. Disconnect cable assembly (2) .
6. Disconnect hose assemblies (3) .
7. Use two people in order to remove electric motor, and secondary steering pump (5). The
weight of electric motor and secondary steering pump (5) is approximately 30 kg (65 lb).
Remove bolts (4), and remove electric motor and secondary steering pump (5) .
2/3
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 3 g02726520
8. Remove bolts (6). in order to
9. Remove secondary steering pump (7) and the gasket.
Installation Procedure
1. Install electric motor and secondary steering pump (5) in the reverse order of removal.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 2 12:16:44 UTC+0800 2020
3/3
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962K WHEEL LOADER FLL
Configuration: 962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
950K and 962K Wheel Loaders Machine Systems
Media Number -KENR5805-00 Publication Date -01/10/2011 Date Updated -03/10/2011
i04559553
Gear Pump (Secondary Steering) - Disassemble
SMCS - 4324-015-GT; 5073-015-SST
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1857 Retaining Ring Pliers 1
Start By:
A. Remove the gear pump.
Illustration 1 g01150348
1. Remove valve (1) .
1/5
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Illustration 2 g01150349
2. Remove plug (2), bolts (3), and cover (4) .
Illustration 3 g01150350
3. Remove housing (5) and O-ring seal (6) .
2/5
962K Wheel Loader FLL00001-UP (MACHINE) POWERED BY C7.1 Engine(SEBP...
2020/4/2
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...