The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader. It details 40 steps for disassembly, removing components like the transmission oil pump, speed sensor, bolts, gears, shafts, bearings, seals, and housing. It then details 22 steps for reassembly, showing how to install the components in reverse order and noting alignment of parts and proper torque for bolts. Tools required include link brackets, eyebolts, retaining ring pliers, and Loctite.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for each fastener. Tools required include link brackets, eyebolts and retaining ring pliers.
This document provides assembly instructions for a torque converter in a 962G wheel loader. It outlines 40 steps to disassemble the torque converter into its individual components and 29 steps to reassemble it. Key components that are removed and installed include the torque converter housing, various gears, bearings, seals, and fasteners. Special tools are required for tasks like removing retaining rings.
This document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps for disassembly, removing components like the transmission oil pump, speed sensor, bolts, gears, shafts, bearings, seals, and housing. It then describes 18 steps for reassembly, showing how to install these same components in reverse order, like installing bearings, seals, gears, shafts, housing, and bolts, while applying loctite and torquing bolts to specifications. Tools required are also listed.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for the fasteners. Tools required include link brackets, eyebolts and retaining ring pliers.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...jfjkskefmsmem
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document provides very detailed technical instructions for taking apart and rebuilding the wheel loader's torque converter.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...ufjjjsekkemmd
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document is a service repair manual for maintenance technicians to service the machine's powertrain.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fujsejfjksekkkm
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fjjskekdmnsme
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for each fastener. Tools required include link brackets, eyebolts and retaining ring pliers.
This document provides assembly instructions for a torque converter in a 962G wheel loader. It outlines 40 steps to disassemble the torque converter into its individual components and 29 steps to reassemble it. Key components that are removed and installed include the torque converter housing, various gears, bearings, seals, and fasteners. Special tools are required for tasks like removing retaining rings.
This document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps for disassembly, removing components like the transmission oil pump, speed sensor, bolts, gears, shafts, bearings, seals, and housing. It then describes 18 steps for reassembly, showing how to install these same components in reverse order, like installing bearings, seals, gears, shafts, housing, and bolts, while applying loctite and torquing bolts to specifications. Tools required are also listed.
This document provides instructions for disassembling and assembling the torque converter of a 962G wheel loader. It describes 40 steps to disassemble the various components of the torque converter including the housing, pump, gears, shafts, bearings and seals. It then describes 28 steps for reassembling the components in reverse order, noting the proper alignment and torque specifications for the fasteners. Tools required include link brackets, eyebolts and retaining ring pliers.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...jfjkskefmsmem
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document provides very detailed technical instructions for taking apart and rebuilding the wheel loader's torque converter.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...ufjjjsekkemmd
This document provides instructions for disassembling and assembling the torque converter of a Caterpillar 962G wheel loader. It describes 40 steps to disassemble the torque converter by removing components like the transmission oil pump, speed sensor, bolts, gears, bearings, seals, and shafts. It then describes 28 steps for reassembling the torque converter by reversing the disassembly process and noting proper alignment of parts, use of threadlocker, and torque specifications for fasteners. The overall document is a service repair manual for maintenance technicians to service the machine's powertrain.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fujsejfjksekkkm
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
Caterpillar cat 962 g wheel loader (prefix 6ew) service repair manual (6ew000...fjjskekdmnsme
1. The document provides step-by-step instructions for disassembling and assembling the torque converter of a 962G wheel loader.
2. It lists 39 steps for disassembly and 40 steps for assembly, showing illustrations and required tools for each step.
3. The steps include removing components like the transmission oil pump, torque converter speed sensor, bolts, gears, bearings, seals, and installing them in reverse order.
JCB 530-110 Telescopic Handler Service Repair Manual SN 563359.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 535-67 Telescopic Handler Service Repair Manual SN 572775.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-120 Telescopic Handler Service Repair Manual SN 562601.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-95 Telescopic Handler Service Repair Manual SN564980.pdffujsekmd9dik
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
JCB 4DX Backhoe Loader Service Repair Manual.pdffujsekmd9dik
This service manual provides information on maintenance and repair of the 4DX Backhoe Loader. It includes sections on general information, routine maintenance, attachments, body and framework, electrics, controls, hydraulics, transmission, brakes, steering and engine. The manual provides information on identification plates, torque settings, greasing points, cleaning air filters, and replacing engine coolant. It also includes details on preservation for storing the machine when not in use for long periods.
JCB 1CX (series 1) Backhoe Loader Service Repair Manual SN751600 and up.pdffujsekmd9dik
This document provides information about identifying JCB machines and their components. It discusses machine identification plates that contain serial numbers for the machine and major units. It also describes typical engine identification numbers. The document outlines torque settings for different types of fasteners used on JCB machines, such as zinc plated and Dacromet fasteners. Tables are included that specify torque values based on fastener size, grade, and lubrication conditions.
Clark GPX 40 Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark GPX 50E Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark GPX 35 Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
The document provides instructions for removing and installing the final drive planetary carrier on a D11R track-type tractor. It describes using various tools to lift and support the heavy components. The removal process involves removing bolts, installing lifting brackets, and using hydraulic tools to separate the carrier from the final drive. Precautions are listed for containing fluids during disassembly.
The document provides instructions for removing and installing the front axle of a M314F wheeled excavator. It details:
1) Removing the front axle assembly from the machine and disassembling it by removing components like the differential, bearings, and seals.
2) The assembly procedure which includes measuring clearances, installing bearings and seals, and adjusting the pinion depth using shims.
3) Tightening the pinion nut to the specified torque and reinstalling the front axle assembly onto the machine.
The document provides instructions for disassembling and assembling the cylinder head of a D11R track-type tractor. It describes removing components like the cylinder head, valves, valve guides, and valve lifters. It then describes the process for assembling these components in reverse order, noting that parts should be kept clean and lubricated with engine oil during assembly. Tools are listed for tasks like compressing valve springs and installing valve guides.
The document provides instructions for removing and installing various components of the rear power take-off (RPTO) system on a Caterpillar D11R track-type tractor, including the adapter, bearing cups and cones, hydraulic pump drive gear, and nuts and bolts. Specific tools are listed and illustrations show the components and steps to disassemble and reassemble the RPTO. Separate sections provide procedures for removing and installing the vibration damper and pulley.
The document provides instructions for removing and installing the front housing on a Caterpillar C18 engine. It describes:
1) Removing components like the camshaft position sensor, crankshaft position sensor, engine support, camshaft gear and crankshaft front seal before removing the front housing.
2) Removing bolts to separate the front housing from the cylinder block, and removing the front oil seal from the housing.
3) Cleaning surfaces and installing the front oil seal and housing back onto the cylinder block using thread lock compound on the bolts.
This document provides instructions for disassembling and assembling the torque converter of a D9T track-type tractor. It lists over 40 steps to disassemble components such as the torque converter cover, output shaft, stator support, and rotating housing. It then lists over 30 steps for assembling these same components in reverse order, including attaching various tools and ensuring proper torque for fasteners.
The document provides instructions for removing and installing final drives and the power train oil filter on a D6R track-type tractor. Key steps include using tools to remove the outer axle and final drive from the machine. The final drive planetary carriers can be removed in the chassis. Instructions are also given for disassembling and assembling the final drives and oil filter, which involves removing seals, gears, and other components and cleaning parts before reassembly.
This document provides instructions for disassembling and assembling components of the right planetary and brake, power train oil pump, and other parts of a D6H track-type tractor. It outlines 21 steps to disassemble the right planetary and brake, removing gears, discs, seals, and other parts. It then provides 22 steps to reassemble the components. A separate section provides 12 steps to remove and install the power train oil pump, disconnecting hoses and removing mounting bolts.
This document provides instructions for removing and installing the cylinder head on a Caterpillar 3516B engine used in a 994K wheel loader. The removal process involves draining coolant, removing connecting tubes and bolts, and lifting off the cylinder head. The installation is the reverse, and includes cleaning surfaces, installing new seals and gaskets, and torquing bolts in a specific sequence. Valves, guides, and other components are also removed and installed using various tools as outlined in the procedure.
This document provides instructions for removing and installing a cylinder head on a Caterpillar 3516E engine. It outlines the required tools and gives step-by-step procedures for disassembling and assembling the cylinder head components, including removing and installing the cylinder head, valves, valve guides, valve seat inserts, and valve lifters. Safety notices are provided throughout to warn technicians of potential hazards during disassembly and assembly.
This service repair manual provides instructions for removing and installing various engine components on a Caterpillar 992K wheel loader with a C32 engine, including:
1) The crankshaft front seal using various tools to puncture, pry, and remove the seal and sleeve.
2) The front gear group using bolts, plates and shafts.
3) The front housing using bolts, seals and lifting equipment to remove the heavy component.
4) The valve mechanism cover using bolts and seals after loosening breathers and hoses.
JCB 530-110 Telescopic Handler Service Repair Manual SN 563359.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 535-67 Telescopic Handler Service Repair Manual SN 572775.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-120 Telescopic Handler Service Repair Manual SN 562601.pdffujsekmd9dik
This document provides specifications for fluids, lubricants, capacities and torque settings for various JCB machine models including the 525-58/67, 527-58/67, 530-95, 530-110, 530-120, 537-120, 537-130, 525-58 Farm Special Plus 530-67 and 535-67. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases, coolants and their specifications. It also provides fluid capacities for items like the fuel tank, engine, gearbox, axles, brake system and hydraulic tank.
JCB 530-95 Telescopic Handler Service Repair Manual SN564980.pdffujsekmd9dik
This document provides lubrication specifications and fluid capacities for various JCB machine models, including 525, 527, 530, 535 and 537 models. It lists recommended engine oils, transmission fluids, hydraulic fluids, greases and other lubricants. It also provides coolant mixture recommendations and notes that new engines do not require a break-in period and should be used immediately in normal work cycles.
JCB 4DX Backhoe Loader Service Repair Manual.pdffujsekmd9dik
This service manual provides information on maintenance and repair of the 4DX Backhoe Loader. It includes sections on general information, routine maintenance, attachments, body and framework, electrics, controls, hydraulics, transmission, brakes, steering and engine. The manual provides information on identification plates, torque settings, greasing points, cleaning air filters, and replacing engine coolant. It also includes details on preservation for storing the machine when not in use for long periods.
JCB 1CX (series 1) Backhoe Loader Service Repair Manual SN751600 and up.pdffujsekmd9dik
This document provides information about identifying JCB machines and their components. It discusses machine identification plates that contain serial numbers for the machine and major units. It also describes typical engine identification numbers. The document outlines torque settings for different types of fasteners used on JCB machines, such as zinc plated and Dacromet fasteners. Tables are included that specify torque values based on fastener size, grade, and lubrication conditions.
Clark GPX 40 Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark GPX 50E Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
Clark GPX 35 Forklift Service Repair Manual.pdffujsekmd9dik
The document is a service manual for Clark GPX 35/40/50E trucks. It includes new overhaul information for GM Vortec V-6 engines and new truck specifications. The manual contains sections on engines, cooling systems, fuel systems, transmissions, electrical systems, drive axles, wheels and tires, braking systems, steering systems, hydraulic systems, uprights, and specifications.
The document provides instructions for removing and installing the final drive planetary carrier on a D11R track-type tractor. It describes using various tools to lift and support the heavy components. The removal process involves removing bolts, installing lifting brackets, and using hydraulic tools to separate the carrier from the final drive. Precautions are listed for containing fluids during disassembly.
The document provides instructions for removing and installing the front axle of a M314F wheeled excavator. It details:
1) Removing the front axle assembly from the machine and disassembling it by removing components like the differential, bearings, and seals.
2) The assembly procedure which includes measuring clearances, installing bearings and seals, and adjusting the pinion depth using shims.
3) Tightening the pinion nut to the specified torque and reinstalling the front axle assembly onto the machine.
The document provides instructions for disassembling and assembling the cylinder head of a D11R track-type tractor. It describes removing components like the cylinder head, valves, valve guides, and valve lifters. It then describes the process for assembling these components in reverse order, noting that parts should be kept clean and lubricated with engine oil during assembly. Tools are listed for tasks like compressing valve springs and installing valve guides.
The document provides instructions for removing and installing various components of the rear power take-off (RPTO) system on a Caterpillar D11R track-type tractor, including the adapter, bearing cups and cones, hydraulic pump drive gear, and nuts and bolts. Specific tools are listed and illustrations show the components and steps to disassemble and reassemble the RPTO. Separate sections provide procedures for removing and installing the vibration damper and pulley.
The document provides instructions for removing and installing the front housing on a Caterpillar C18 engine. It describes:
1) Removing components like the camshaft position sensor, crankshaft position sensor, engine support, camshaft gear and crankshaft front seal before removing the front housing.
2) Removing bolts to separate the front housing from the cylinder block, and removing the front oil seal from the housing.
3) Cleaning surfaces and installing the front oil seal and housing back onto the cylinder block using thread lock compound on the bolts.
This document provides instructions for disassembling and assembling the torque converter of a D9T track-type tractor. It lists over 40 steps to disassemble components such as the torque converter cover, output shaft, stator support, and rotating housing. It then lists over 30 steps for assembling these same components in reverse order, including attaching various tools and ensuring proper torque for fasteners.
The document provides instructions for removing and installing final drives and the power train oil filter on a D6R track-type tractor. Key steps include using tools to remove the outer axle and final drive from the machine. The final drive planetary carriers can be removed in the chassis. Instructions are also given for disassembling and assembling the final drives and oil filter, which involves removing seals, gears, and other components and cleaning parts before reassembly.
This document provides instructions for disassembling and assembling components of the right planetary and brake, power train oil pump, and other parts of a D6H track-type tractor. It outlines 21 steps to disassemble the right planetary and brake, removing gears, discs, seals, and other parts. It then provides 22 steps to reassemble the components. A separate section provides 12 steps to remove and install the power train oil pump, disconnecting hoses and removing mounting bolts.
This document provides instructions for removing and installing the cylinder head on a Caterpillar 3516B engine used in a 994K wheel loader. The removal process involves draining coolant, removing connecting tubes and bolts, and lifting off the cylinder head. The installation is the reverse, and includes cleaning surfaces, installing new seals and gaskets, and torquing bolts in a specific sequence. Valves, guides, and other components are also removed and installed using various tools as outlined in the procedure.
This document provides instructions for removing and installing a cylinder head on a Caterpillar 3516E engine. It outlines the required tools and gives step-by-step procedures for disassembling and assembling the cylinder head components, including removing and installing the cylinder head, valves, valve guides, valve seat inserts, and valve lifters. Safety notices are provided throughout to warn technicians of potential hazards during disassembly and assembly.
This service repair manual provides instructions for removing and installing various engine components on a Caterpillar 992K wheel loader with a C32 engine, including:
1) The crankshaft front seal using various tools to puncture, pry, and remove the seal and sleeve.
2) The front gear group using bolts, plates and shafts.
3) The front housing using bolts, seals and lifting equipment to remove the heavy component.
4) The valve mechanism cover using bolts and seals after loosening breathers and hoses.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962G WHEEL LOADER 6EW
Configuration: 962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Media Number -SENR1381-10 Publication Date -01/10/2007 Date Updated -25/10/2007
i05754103
Torque Converter - Disassemble
SMCS - 3101-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 1P-7405 Eyebolt 2
C 2P-8312 Retaining Ring Pliers 1
Start By:
A. Separate the torque converter from the transmission and from the output gears. Refer to
Disassembly and Assembly, "Torque Converter from Transmission, Output Gears -
Separate".
1/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00319444
1. Use Tooling (A) and a suitable lifting device to place torque converter housing (1) onto
suitable cribbing, as shown.
Illustration 2 g00319445
2. Remove transmission oil pump (2) . Refer to Disassembly and Assembly, "Transmission Oil
Pump - Remove".
3. Remove bolt (3) and washer (4) .
Illustration 3 g00319447
4. Remove torque converter speed sensor (5) .
2/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g00319448
5. Remove bolts (6) that hold the torque converter to the torque converter housing.
Illustration 5 g00319449
6. Remove bolts (7) and pump drive flange (8) .
Illustration 6 g00319450
7. Remove bolt (9) that holds shaft (10) to the torque converter housing.
3/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 7 g00319451
8. Install Tooling (B) in pump drive gear (11) .
9. Lift pump drive gear (11) and drive gear shaft (10) . Lift drive gear shaft (10) out of the
torque converter housing bore.
10. Place the assembly to one side of the torque converter housing bore. Make sure that drive
gear shaft (10) is not in the torque converter housing bore.
Illustration 8 g00319453
11. Remove Tooling (B) from pump drive gear (11) .
12. Remove drive gear shaft (10) from pump drive gear (11) .
13. Remove bearing (12) from pump drive gear (11) .
4/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 9 g03652939
14. Use Tooling (A) and a suitable lifting device to remove torque converter housing (1) . The
weight of torque converter housing (1) is approximately 113 kg (250 lb).
Illustration 10 g03652860
15. Turn torque converter housing (1) over to remove pump drive gear (11) .
Illustration 11 g00319455
5/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 16. Remove drive gear (13) .
Illustration 12 g00319456
17. Remove retaining ring (14) that holds output shaft (15) .
18. Use a soft faced hammer in order to free the bearing from the carrier assembly. Remove
output shaft (15) from the carrier assembly.
Illustration 13 g00319500
19. Remove seal ring (16) from output shaft (15) .
20. Use a suitable press to remove roller bearing (17) .
6/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00319458
21. Remove bolts (18) . Remove torque converter impeller (19) from the impeller housing.
Note: If the torque converter is equipped with a freewheel stator, continue with Steps 22
through 28.
Illustration 15 g00877132
22. Turn impeller (20) to the opposite side.
23. Remove retaining ring (21) and spacer (22) from carrier shaft (23) .
24. Remove stator (24) .
7/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 16 g00877125
25. Remove retaining ring (25) and washer (26) from stator (24) . Repeat the procedure for the
opposite side of stator (24) .
Illustration 17 g00877126
Note: If necessary, Raise the temperature of the stator to a maximum temperature of 135 °C
(275 °F) for approximately 15 minutes.
26. Remove bearing race (27) , freewheel rollers (28) , freewheel springs (29) , and freewheel
cam (30) from stator (24) .
8/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g00877129
27. Remove spacer (31) from impeller (20) .
Illustration 19 g00877133
28. Use a press to remove carrier shaft (23) from impeller (20) .
Illustration 20 g00877250
29. Remove bolts (32) and drive gear (33) from the torque converter impeller.
9/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g00877257
30. Remove roller bearing (34) from torque converter impeller (19) .
Illustration 22 g00877258
31. Remove seal ring (36) from carrier assembly (35) .
32. If necessary, remove locating dowel (37) .
10/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g01146281
33. Remove ring (39A) . Remove retaining ring (38) and impeller cover (39) from impeller
housing (40) .
Illustration 24 g00877261
34. Use Tooling (C) in order to remove retaining ring (41) .
Illustration 25 g00877262
35. Remove bearing spacer (42) .
36. Remove O-ring seal (43) .
11/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 26 g00877263
37. Turn the impeller housing onto the opposite side. Remove turbine assembly (44) .
Illustration 27 g00877264
38. Remove bolts (45) . Separate turbine (46) from turbine hub assembly (47) .
39. If necessary, remove locating dowel (48) .
Illustration 28 g00877265
12/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 40. Remove roller bearing (49) from the impeller housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Mar 23 10:36:14 UTC+0800 2020
13/13
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: WHEEL LOADER
Model: 962G WHEEL LOADER 6EW
Configuration: 962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine
Disassembly and Assembly
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train
Media Number -SENR1381-10 Publication Date -01/10/2007 Date Updated -25/10/2007
i05754104
Torque Converter - Assemble
SMCS - 3101-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3940 Link Bracket 3
B 1P-7405 Eyebolt 2
C 2P-8312 Pliers 1
D - Loctite 536 -
Illustration 1 g00877265
1/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Note: The notch on roller bearing (49) must be aligned with locating dowel (48) .
1. Install roller bearing (49) .
Illustration 2 g00877264
2. Install locating dowel (48) in turbine hub assembly (38) .
3. Install turbine hub assembly (47) to turbine (46) . Install bolts (45) . The torque for bolts
(45) is 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 3 g00877263
4. Install the impeller housing over turbine assembly (44) , as shown.
2/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 4 g00877262
5. Install O-ring seal (43) .
6. Install bearing spacer (42) .
Illustration 5 g00877261
7. Use Tooling (C) in order to install retaining ring (41) .
Illustration 6 g01146281
3/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 8. Install impeller cover (39) and retaining ring (38) in impeller housing (40) . Install ring
(39A) .
Illustration 7 g00877258
9. Install locating dowel (37) .
10. Install seal ring (36) on carrier assembly (35) .
Illustration 8 g00877257
Note: The notch in roller bearing (34) must be facing upward.
11. Install roller bearing (34) in torque converter impeller (19) .
4/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 9 g00877250
12. Install drive gear (33) and bolts (32) on the torque converter impeller. The torque for bolts
(32) is 105 ± 15 N·m (75 ± 11 lb ft).
Note: If the torque converter is equipped with a freewheel stator, continue with Steps 13
through 18.
Illustration 10 g00877133
13. Use a suitable press to install carrier shaft (23) in impeller (20) .
5/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 11 g00877129
14. Install spacer (31) on impeller (20) .
Illustration 12 g00877126
Note: If necessary, Raise the temperature of stator (24) to a maximum temperature of 135 °
C (275 °F). Install the cam with the IMPELLER SIDE facing downward. Continue with the
installation until freewheel cam (30) contacts the retaining ring (not shown).
15. Install freewheel cam (30) , freewheel springs (29) , freewheel rollers (28) , and bearing race
(27) in stator (24) .
Note: Install freewheel springs (29) with the maximum number of loops toward the outside
diameter of freewheel cam (30) .
Illustration 13 g00877125
16. Install washer (26) and snap ring (25) on stator (24) . Repeat the procedure for the opposite
side of stator (24) .
6/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 14 g00877132
17. Install stator (24) on impeller (20) .
18. Install spacer (22) and snap ring (21) on carrier shaft (23) .
Illustration 15 g00319458
19. Install torque converter impeller (19) on the impeller housing.
20. Install bolts (18) . The torque for bolts (18) is 60 ± 7 N·m (44 ± 5 lb ft).
7/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 16 g00319500
21. Install roller bearing (17) on output shaft (15) .
22. Install seal ring (16) .
Illustration 17 g00319456
23. Install output shaft (15) in the carrier assembly.
24. Install retaining ring (14) that secures output shaft (15) .
Illustration 18 g00319455
25. Install drive gear (13) .
8/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 19 g03652860
26. Install pump drive gear (11) to the underside of torque converter housing (1) .
Illustration 20 g03652939
27. Install Tooling (A) and a suitable lifting device to install torque converter housing (1) onto
the torque converter assembly. The weight of torque converter housing (1) is approximately
113 kg (250 lb).
Illustration 21 g00319448
9/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SEBP...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 28. Install bolts (6) that hold the torque converter to the torque converter housing. The torque
for bolts (6) are 60 ± 7 N·m (44 ± 5 lb ft).
Illustration 22 g00319453
29. Install bearing (12) and drive gear shaft (10) in pump drive gear (11) .
30. Install Tooling (B) on pump drive gear (11) .
Illustration 23 g00319451
31. Place the assembly in the original position. Make sure that drive gear shaft (10) is in the
torque converter housing bore.
32. Remove Tooling (B) from pump drive gear (11) .
10/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 24 g00319450
33. Install bolt (9) that holds shaft (10) to torque converter housing (1) . The torque for bolt (9)
is 105 ± 20 N·m (75 ± 15 lb ft).
Illustration 25 g00319449
34. Install pump drive flange (8) and bolts (7) . The torque for bolts (7) is 60 ± 7 N·m (44 ± 5 lb
ft).
Illustration 26 g00319447
11/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. 35. Apply Tooling (D) to torque converter speed sensor (5) . Install torque converter speed
sensor (5) . Adjust the torque converter speed sensor in order to maintain an air gap of 0.71
± 0.18 mm (0.028 ± 0.007 inch). The torque for torque converter speed sensor (5) is 25 ± 5
N·m (18 ± 4 lb ft).
Illustration 27 g00319445
36. Install washer (4) and bolt (3) . The torque for bolt (3) is 105 ± 20 N·m (75 ± 15 lb ft).
37. Install transmission oil pump (2) . Refer to Disassembly and Assembly, "Transmission Oil
Pump - Install".
Illustration 28 g00319444
38. Install Tooling (A) and a suitable lifting device to torque converter housing (1) , as shown.
End By: Connect the torque converter to the transmission and to the output gears. Refer to
Disassembly and Assembly, "Torque Converter to Transmission, Output Gears - Connect".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Mar 23 10:37:13 UTC+0800 2020
12/12
962G Wheel Loader 6EW00001-UP (MACHINE) POWERED BY 3126 Engine(SE...
2020/3/23
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...