This document provides instructions for disassembling and assembling the governor of a 3204 vehicular engine for 943 & 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, various screws, springs, levers, and other governor components. Detailed steps are provided to disassemble the governor housing and related parts, noting any specific tools or precautions needed. Corresponding instructions then describe reassembling the governor components and housings.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including the lever assembly, shaft, springs, and housing pieces.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including the lever assembly, shaft, springs, and housing pieces.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
1) The document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine used in Caterpillar 953 track loaders.
2) The disassembly instructions include removing the fuel injection pump housing, governor housing cover, adjustment screws, lever assembly, torque control group, and weight assembly.
3) The assembly instructions list installing these components in reverse order and adjusting clearance measurements and spring tensions as specified.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the parts and ensure proper dimensions during reassembly.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in similar detail over 37 steps, specifying the order and orientation of each part.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in 37 steps and involves cleaning and reinstalling the parts in reverse order with proper alignment and specifications.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in 37 steps and involves cleaning and reinstalling the parts in reverse order with proper alignment and specifications.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise assembly is required to ensure proper governor function for fuel delivery control.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise positioning and tool usage is required to properly remove and replace small internal parts like seals and bearings.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. Precise instructions are given to disassemble and reassemble small intricate parts like ensuring proper end play of flyweights on dowels during assembly.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise assembly is required to ensure proper governor function and prevent issues like holding the riser in maximum fuel delivery.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. Precise assembly is required to ensure proper governor function that regulates fuel delivery based on engine speed.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
More Related Content
Similar to Caterpillar Cat 953 TRACK LOADER (Prefix 78Y) Service Repair Manual (78Y01191 and up).pdf
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the parts and ensure proper dimensions during reassembly.
This document provides instructions for disassembling and assembling the governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing the fuel injection pump housing, governor housing, torque control group, and other components. Detailed steps are provided to disassemble the various parts of the governor system, including removing pins, plates, springs, and seals.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in similar detail over 37 steps, specifying the order and orientation of each part.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in 37 steps and involves cleaning and reinstalling the parts in reverse order with proper alignment and specifications.
This document provides instructions for disassembling and assembling the governor component of a 3204 vehicular engine powering a 943 track loader. It describes removing over 30 individual parts in 19 steps, including covers, screws, springs, pins, plates, housings and more. Reassembly is outlined in 37 steps and involves cleaning and reinstalling the parts in reverse order with proper alignment and specifications.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 70 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. The goal is to repair or replace parts like the governor shaft, flyweights, or dashpot assembly. Precise reassembly is needed for proper engine function.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise assembly is required to ensure proper governor function for fuel delivery control.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise positioning and tool usage is required to properly remove and replace small internal parts like seals and bearings.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. Precise instructions are given to disassemble and reassemble small intricate parts like ensuring proper end play of flyweights on dowels during assembly.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in reverse order. Precise assembly is required to ensure proper governor function and prevent issues like holding the riser in maximum fuel delivery.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 40 individual parts in 37 steps for disassembly and 33 steps for assembly, including removing the fuel injection pump housing, governor components like springs, pins, and levers, and reinstalling them in the reverse order. Precise assembly is required to ensure proper governor function that regulates fuel delivery based on engine speed.
This document provides disassembly and assembly instructions for a governor for a 3204 vehicular engine used in 943 and 953 track-type loaders. It describes removing and installing over 30 individual parts in 3 sentences or less for each step. The overall process involves disassembling the governor housing, fuel injection pump housing, and various internal components and installing them in the reverse order.
Similar to Caterpillar Cat 953 TRACK LOADER (Prefix 78Y) Service Repair Manual (78Y01191 and up).pdf (20)
Kubota B1710D Tractor Parts Catalogue Manual (Publishing ID BKIDK0391).pdfjnnfnjsdnnd
This document provides a parts list for frequently used engine parts. It includes the part number, name in Polish and English, quantity, serial number, weight, and remarks for each part. Common parts listed include starters, switches, fuses, filters, gaskets, bolts, and more. The document is published by Kubota and copyrighted for 2015.
Kubota B1700-HD Tractor Parts Catalogue Manual (Publishing ID BKIDA0020).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota B1700-HD engine, including the crankcase, oil pan, cylinder head, gear case, and head cover. It lists 170 part numbers, part names in Polish and English, quantities, serial numbers if applicable, weights in kg, and other remarks. The parts list is divided into sections for the main engine components and subsections for individual parts within each component.
Volvo EC55-2 Compact Excavator Parts Catalogue Manual – SN 5001 - 7620.pdfjnnfnjsdnnd
This document contains specifications for various engine parts for a Volvo EC55-2 engine. It includes sections for the engine, cylinder head, valves, pistons, connecting rods, camshaft, and other components. Each section lists the relevant part numbers, descriptions, quantities, and other details. The document provides an extensive catalogue of replacement parts for this engine model.
Kubota B1241D-EC-F2-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA516...jnnfnjsdnnd
This document provides a parts list for frequently used items and their information. It includes 30 parts ranging from switches and fuses to hoses and filters. Each part is listed with its number, name in Polish and English, quantity, and other identifying information like serial number and weight. The document is copyrighted by KUBOTA in 2015.
Kubota B1700D Tractor Parts Catalogue Manual (Publishing ID BKIDK0093).pdfjnnfnjsdnnd
This document provides a parts list for a crankcase (Kurbelgehäuse) with part numbers, names, quantities, serial numbers, and other details. It lists over 200 individual part numbers. The parts are for various engine components, including the crankcase, oil pan, cylinder head, gear case, and head cover.
Kubota B1181DT-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA51...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 20 parts that make up the main bearing case assembly. Key components listed include the main bearing case group, bearing case cover, oil seal, gaskets, bolts, and bearing shells. The document also provides copyright information at the bottom of each page.
Kubota B1241D-EC-F Tractor Parts Catalogue Manual (Publishing ID BKIDA5131).pdfjnnfnjsdnnd
This document provides a list of parts for an engine. It includes the part numbers, names in Polish and English, quantities, and other specifications for 230 different engine parts organized into categories like crankcase, oil pan, cylinder head, gear case, and head cover. The parts range from bolts, nuts, and plugs to larger assemblies and components like the crankcase, cylinder head, and gear case.
Kubota B1181D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5129).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. It appears to be a comprehensive listing of components for a Kubota engine.
Kubota B1121D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a parts list for the main bearing case of an engine. It includes the part numbers, names, quantities, and other details for over 100 individual parts that make up the main bearing case assembly. The parts include the main bearing case group, bolts, pins, seals, gaskets, covers, and bearings.
Kubota B1161D-F2-EC-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA515...jnnfnjsdnnd
This document provides a list of parts for a Kubota engine crankcase assembly. It includes 140 individual parts with information on part numbers, names, quantities, and other specifications. The crankcase assembly consists of a composite crankcase component as the main part, along with various caps, plugs, pins, bolts, and other fittings that make up the full assembly. Safety precautions are noted for proper handling of the engine parts.
Kubota B1161D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5128).pdfjnnfnjsdnnd
This document provides a parts list for a Kubota engine. It includes 230 parts ranging from starters, switches, fuses, filters, hoses, belts, and other engine components. Each part is listed with the part number, name in Polish and English, quantity, serial number if applicable, weight, and any remarks. This extensive list details all replacement parts for the engine.
Kubota B1121D-S5 Tractor Parts Catalogue Manual (Publishing ID BKIDA5156).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine, including the part numbers, names, quantities, and weights of various engine components. It lists 190 line items of parts organized into categories like crankcase, oil pan, cylinder head, gear case, and more. The document is in two languages, with the part names listed in both Polish and English.
Kubota B1121D-EC Tractor Parts Catalogue Manual (Publishing ID BKIDA5127).pdfjnnfnjsdnnd
This document provides a parts list for an engine. It includes 260 parts related to the engine, such as the crankcase, cylinder head, oil pan, gear case, and more. Each part is listed with its number, name in Polish and English, quantity, and other specifications. It appears to be a comprehensive listing of engine parts for reference when maintaining or repairing the engine.
Kubota B1121D Tractor Parts Catalogue Manual (Publishing ID BKIDA5126).pdfjnnfnjsdnnd
This document contains parts information for a Kubota engine. It lists 190 parts in the engine's crankcase, oil pan, cylinder head, gear case, head cover, oil filter, dipstick/guide, and oil pump systems. The parts are identified by number, name in Polish and English, quantity, and other specifications. Kubota claims copyright of the document from 2015.
The document provides instructions for removing the planetary carrier from the final drive of a D9R track-type tractor. It describes:
1) Removing the axles, cover, and bolts to access the carrier.
2) Using an adapter tool to lift the carrier out of the final drive hub.
3) Removing the sun gear from the carrier.
It then provides detailed steps and illustrations for safely removing and installing the carrier while supporting the surrounding components.
The document provides instructions for disassembling and assembling the final drive of a D7R track-type tractor. It lists 30 steps for disassembly, including removing gears, shafts, bearings and seals. It also lists 25 steps for assembly, installing components in reverse order and noting proper alignment and clearance measurements. Required specialized tools are listed for various removal and installation tasks.
This document provides instructions for installing and removing various components of a Caterpillar 3412E engine, including:
1) Installing the aftercooler housing and core on a 3408E/3412E engine.
2) Removing and installing the front engine support on a 3408E/3412E engine.
3) Removing the rear gear group from a 3408E/3412E engine, which involves disassembling various gears, bearings, and shafts.
4) Installing the rear gear group on a 3408E/3412E engine, which involves assembling the various gears, bearings, and shafts.
The document provides instructions for removing and installing a cylinder head on a Caterpillar D9N track-type tractor powered by a 3408 engine. It describes:
1) Removing hoses, tubes, bolts and the fuel manifold to access the cylinder head.
2) Attaching lifting tools and removing the cylinder head, which weighs approximately 90-172 kg depending on the engine model.
3) Cleaning and inspecting parts, applying a new gasket and reinstalling the cylinder head along with associated components like seals and bolts. Tightening bolts in a specific sequence is emphasized.
The document provides instructions for removing, disassembling, and installing a compression brake on a Caterpillar D7R track-type tractor. It describes removing the valve mechanism cover, then removing the compression brake by lifting it out while holding the oil tube. It also details disassembling the compression brake by removing pistons, springs, seals and other components. The assembly process is described as well, including installing new seals and pistons before reinstalling the compression brake.
The document provides instructions for disassembling a steering planetary and brake assembly. Key steps include:
1. Removing the final drive, planetary group, and brake assembly from the machine.
2. Separating the planetary group and brake assembly from the final drive hub using lifting brackets and forcing bolts.
3. Further disassembling the planetary group and brake assembly by removing housing components like ring gears, plates, and carriers to access internal parts like gears, shafts, pins, and seals.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 953 TRACK LOADER 78Y
Configuration: 953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Media Number -SENR4214-00 Publication Date -01/04/1985 Date Updated -11/10/2001
Governor (Interim Scroll Fuel System)
SMCS - 1264-015; 1264-016
Disassemble Governor (Interim Scroll Fuel System)
START BY:
1/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. a. remove fuel injection pump housing and governor (interim scroll fuel system)
NOTE: If it is desired to only remove the governor so the fuel injection pump housing can be
disassembled, do only Steps 1, 3, 5, 6, 12 and 13.
1. Remove cover (1).
2. Remove lever (2) and the key from the shaft.
3. Remove bolts (3) and cover (4) from the governor housing.
4. Remove O-ring seals (5) from the low and high idle adjustment screws.
5. Remove screw (6) from rack stop collar (7), and remove collar (7). Remove the spring from
behind the collar.
2/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 6. Remove bolts (8), and remove governor housing (9) from the fuel injection pump housing.
7. Remove high idle adjustment screw (11) and low idle adjustment screw (10) from the governor
housing. Remove the high idle adjustment screw first.
8. Remove bolts (12) and torque control (13) from the governor housing.
9. Remove bolt (14) and the lock. Remove shaft (15) and lever assembly (16) from the governor
housing.
Pin (19) holds spring (17) in compression. Use caution to prevent injury
when pin (19) is removed. Release the tension in spring (17) slowly.
3/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 10. Remove pin (19), spring (17) and plunger (18) from the lever assembly.
11. Remove seal (21) from the governor housing. Use tooling (A) to remove the plug and bearings
(20) from the governor housing.
NOTE: If a replacement of spring guide (22) is necessary, see Special Instruction, Form No.
SMHS7356 - Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide.
12. Remove seat, washer, wave-washers and governor spring (23) from the weight assembly.
Remove spring washer (26) from the weight assembly.
13. Remove bolts (24) and the lock that hold weight assembly (25) to the fuel injection pump
housing. Pull the weight assembly out and to the side to disengage it from the rack.
14. Remove ring (27) and the dowel under the ring that holds seat (28) in place.
4/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 15. Remove seat (28), bolt (29) and spring (30) from the weight assembly. Remove washer (31)
from spring (30).
16. Remove guide (32), the two races and bearing from the sleeve.
17. Remove the second dowel (33) that holds sleeve (34) in place, and remove the sleeve.
18. Remove valve (37) from the weight assembly and cylinder (35).
19. Remove lock (36), and separate the weight assembly and cylinder (35).
20. Remove sleeve (38) and piston (39) from cylinder (35). Remove the O-ring seal from the sleeve.
Assemble Governor (Interim Scroll Fuel System)
5/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. NOTE: Put clean oil on all parts before assembly and be sure all oil passages are clear.
1. Install the O-ring seal on sleeve (2). Install piston (1) in sleeve (2). Install sleeve (2) in cylinder
(3).
2. Install cylinder (3) in weight assembly (4), and install lock (5) to hold them together.
3. Install valve (7) through the cylinder, and install sleeve (6) on the valve with the second hole in
the sleeve in alignment with the hole in the valve. Install dowel (8) to hold the sleeve on the valve.
6/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 4. Install larger race (9), bearing (10), smaller race (11) and guide (12) on sleeve (8). Put the hole in
guide (12) in alignment with the first hole in sleeve (8).
5. Install washer (16) in spring (13). Install bolt (17) in seat (14). Put spring (13) and seat (14) in
position on guide (12) with the hole in seat (14) in alignment with the hole in guide (12). Install
dowel (18) through seat (14) and guide (12). Install ring (15) on the seat to hold the dowel in place.
6. Install the weight assembly on the fuel injection pump housing with piston (1) engaged over the
groove in rack (19). Install lock (20) and the bolts that hold the weight assembly to the fuel injection
pump housing.
7. Install spring washer (26) on the bolt as shown.
8. Install spring (25), one wave washer (24), flat washer (23), other wave washer (22) and seat (21)
on the bolt as shown.
7/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 9. Put plunger (28) and spring (27) in position in lever assembly (30), and install pin (29) to hold the
spring and plunger in place.
10. Dimensions (X) and (Y) are controlled by the depths of bearings (32) and (33) in the governor
housing. Install bearings (32) and (33) with tooling (A). Install lever assembly (30) and shaft (31) in
the governor housing. With lever assembly (30) pushed against bearing (33) on the detent side, the
clearance [dimension (Y)] between the guide for the governor spring and lever assembly (30) must
be approximately 2.49 mm (.098 in.). Push lever assembly (30) against bearing (32) on the other
side. The clearance [dimension (X)] between the guide for the governor spring and lever assembly
must be approximately 3.40 mm (.134 in.). If the measurements are not correct, remove the lever
assembly and the shaft, and move the bearings as necessary to get the correct measurement. After
the bearings are installed, there must be approximately .38 mm (.015 in.) end play in the lever
assembly. Remove the shaft and lever assembly.
11. Install the plug on the detent side of the governor housing with tooling (A) to a depth of 2.30 ±
0.5 mm (.091 ± 0.20 in.). Install the lip-type seal in the opposite side of the governor housing with
tooling (A). Install the lip-type seal with the lip toward the inside of the governor housing.
12. Put the lever assembly and shaft in position in the governor housing, and install the bolt and lock
in the lever assembly.
13. Assemble the torque control group as follows:
a. Install lock (35), retainer (36), insulator (37) and retainer (38) on bolts (34) as shown.
b. Install contact (39) on bolts (34) as shown.
8/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. c. Install spring (40), spacer (41), shim (42), bar (43) and insulator (44) on bolts (34) as shown.
14. Install torque control group (45) on the governor housing as shown. Bend the lock to hold the
bolts tight.
15. Install low idle adjustment screw (46) first; then high idle adjustment screw (47) in the governor
housing.
16. Put the gasket and governor housing (48) in position on the fuel injection pump housing with
bolt (17) and the spring seat in alignment with the spring guide in the governor housing. Install the
bolts that hold the governor housing to the fuel injection pump housing.
9/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 17. Install O-ring seal (49) on the low and high idle adjustment screws.
18. Put spring (50) and rack stop collar (51) in position on the bolt in the weight assembly, and
install the allen screw that holds the rack stop collar in place.
19. Put the gasket and cover in position on the governor housing with dowel (52) in the cover in
alignment with notch (53) in the rack stop collar. Install the bolts that hold the cover in place.
20. Install the gasket and cover (54) over the low and high idle adjustment screws.
21. Install the key and lever on shaft (31).
22. After installation of the fuel injection pump housing and governor, adjust the rack and governor.
See Fuel Rack Setting And Governor Adjustments in Testing And Adjusting.
END BY:
a. install fuel injection pump housing and governor (interim scroll fuel system)
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Dec 25 13:17:20 UTC+0800 2021
10/10
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 953 TRACK LOADER 78Y
Configuration: 953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
3204 VEHICULAR ENGINE FOR 943 & 953 TRACK-TYPE LOADERS
Media Number -SENR4214-00 Publication Date -01/04/1985 Date Updated -11/10/2001
Governor (New Scroll Fuel System Effective In Production
With 10X5411-Up, 45V36536-Up)
SMCS - 1264-015; 1264-016
1/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Disassemble Governor (New Scroll Fuel System Effective In
Production With 10X5411-Up, 45V36536-Up)
START BY:
a. remove fuel injection pump housing and governor (new scroll fuel system effective in production
with 10X5411-UP, 45V36536-UP)
b. remove fuel transfer pump (new scroll fuel system effective in production with 10X5411-UP,
45V36536-UP)
NOTE: If it is desired to remove only the governor so the fuel injection pump housing can be
disassembled, do only Steps 1, 2, 15, 21, 25, 26, 27, 28, 31, 33, 34 and 37.
1. Remove bolts (1) and cover (2).
2/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 2. Remove six bolts (3), two top bolts (4), housing (5) and the gasket.
3. Remove governor spring (6), the two wave washers, one flatwasher and seat from the guide in the
housing.
4. Make a mark of the position of lever (7) on shaft (8). Loosen bolt (10). Use a chisel or
screwdriver to expand expansion of lever (7) so it can be removed from shaft (8).
5. Remove cover assembly (9).
6. Use tooling (A) to remove seal (10) from cover (9).
7. Remove low idle adjustment screw (12) and spring (11) from the housing.
3/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 8. Remove shaft assembly (14), lever (13) and lever (15) from the housing.
9. Remove two snap rings from pins (17), and remove pins (17). Remove plates (16) and stop (18)
from the shaft assembly.
10. Remove pin (20), pin (19) and spring (21) from the shaft assembly.
11. Remove shaft (22) and lever (23) from the housing.
4/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. NOTICE
Remove check valve (24) only if a replacement is necessary because the
check valve will be damaged during removal.
12. Remove check valve (24) if a replacement is necessary.
13. Remove contact (25) and body (26) for the governor dashpot adjustment screw from the
housing. Remove bolts (27), cover (28) and the gasket from the housing.
14. Remove seal (29) and adjustment screw (30) for high idle.
15. Remove two bolts (31), housing (32) and the gasket from the fuel injection pump housing.
5/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 16. Remove bolts (33) and torque control group (34).
17. Disassemble the torque control group and inspect the spacer, spring and insulator for damage or
wear.
18. Remove bolts (36) and block (35) for the full load stop from the housing.
19. Remove the bolt that holds collar (37) to bolt (39). Remove collar (37) and spring (38) from bolt
(39). Remove bolt (39) from the block.
20. Remove the stop screw from collar (37) if a replacement is necessary.
21. Remove bolts (41) and governor servo (40) from the fuel injection pump.
6/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 22. Remove lockring (46), seat (45), spring (broken link spring) (44) and sleeve (43) from valve
(42). Remove the other lockring (46) from the groove in the center of valve (42).
NOTE: The groove in the bottom of valve (42) must be in alignment with the servo body to permit
removal from the fuel rack.
23. Remove valve (42), sleeve (47) and piston (49) from the governor servo. Remove the O-ring seal
from sleeve (47).
24. Remove pin (48) and lever (50) from the governor servo.
25. Use tool (C) to hold spring (52) in compression so ring (51) can be removed. Spring (52) is used
to put a preload on the thrust bearing for the camshaft in the fuel injection pump housing.
26. Remove ring (51); then remove tool (C).
27. Remove bearing (53), sleeves (54) and spring (52) from the governor shaft.
7/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 28. Remove ring (55) and dashpot assembly (56) from the governor shaft.
29. Use tool (B) to remove snap ring (62) from seat (59). Remove ring (61) and spool (60) from seat
(59).
30. Remove seat (59) from spring (58), and remove spring (58) from seat (57).
31. Remove spring (overfueling spring) (63) and riser (64) from the governor shaft.
32. Remove ring (65), races (66) and bearing (67) from the riser.
8/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 33. Use a screwdriver to remove shield (68) as shown.
NOTE: Make a replacement of shield (68) any time it is removed.
34. Remove bolts (69) and carrier (70) for the governor flyweights.
35. Remove dowels (71) and flyweights (73) from the carrier.
36. Remove shaft (72) from the carrier. Remove the dowel from shaft (72).
37. Remove races (74) and bearing (75) from the camshaft in the fuel injection pump housing.
Assemble Governor (New Scroll Fuel System Effective In
Production With 10Y5411-UP, 45V36536-UP)
9/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 EN...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. NOTE: If the governor was removed only to permit repair of the fuel injection pump housing, do
only Steps 1, 4, 5, 7, 9, 10, 11, 16, 22, 37, 39 and 40.
NOTE: Put clean oil on all parts before assembly. Be sure all oil passages are clear.
1. Install one race (1), bearing (2) and the other race (1) on the camshaft in the fuel injection pump
housing.
2. Put flyweights (3) in position on carrier (4), and install the dowels to hold the flyweights in place.
The flyweights must move freely on the dowels and have 0.010 to 0.23 mm (0.0004 to 0.009 in.)
end play.
10/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 3. Install dowel (5) in governor shaft (6), and install the governor shaft in the carrier as shown.
4. Put the carrier in position on the camshaft, and install the bolts that hold the carrier in place.
NOTE: Make a replacement of shield (7) any time it is removed.
5. Install shield (7) on the carrier, and use tool (A) to push the shield against its seat. Use a hammer
and punch to move the metal (stake) two places on the side of the shield 180° ± 5° apart next to the
holes in the shield.
6. Install one race (9), bearing (10), the other race (9), and use tool (B) to install the ring on riser (8)
as shown.
11/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. 7. Install riser (8) and the spring (overfueling spring) on the governor shaft as shown.
8. Assemble the dashpot as follows:
a. Install spring (12) on seat (11), and install seat (13) in spring (12).
b. Put spool (14) and ring (15) in position on seat (13), and use tool (B) to install stop ring (16) to
hold them in place.
9. Install dashpot assembly (17) on the governor shaft as shown.
10. Install ring (21) in the lower groove in the governor shaft. Install one sleeve (20), spring (19), the
other sleeve (20) and bearing (18) on the governor shaft as shown.
NOTE: Spring (19) is used to put a preload on the thrust bearing on the camshaft in the fuel
injection pump housing.
12/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. 11. Use tool (C) to hold spring (19) in compression, and install ring (22) in the groove in the
governor shaft. Remove tool (C).
12. Put lever (27) in position on governor servo (23), and install pin (24) to hold the lever in place.
Use a hammer and chisel to move the metal (stake) four places 90° apart on the outside surface on
both legs of the governor servo to hold pin (24) in place.
13. Install the O-ring seal on sleeve (25). Install piston (26) and sleeve (25) in the governor servo as
shown.
14. Install valve (28) in the governor servo as shown.
15. Install one lockring (32) in the groove near the center of valve (28). Put sleeve (29), spring
(broken link spring) (30) and seat (31) in position on valve (28), and install the other lockring (32) to
hold them in place.
13/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 16. Put the governor servo in position on the fuel injection pump housing with piston (26) engaged
over rack (33), and install the bolts that hold the governor servo in place.
17. Install torque rise adjustment screw (36) in collar (34) as shown, and install locknut (35) on the
screw.
18. Install bolt (38) in block (40) as shown. Install spring (37) on bolt (38) as shown. Put collar (34)
in position on bolt (38) with the hole in the collar in alignment with the notch in bolt (38), and install
bolt (39) to hold the collar in place.
19. Put block (40) in position on housing (41) with the holes in the block in alignment with dowels
(42). Install the bolts that hold the block in place.
14/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 20. Assemble the torque control group as follows:
a. Install bar (47), contact (44), spacer (48) on insulator (43) as shown.
b. Install retainer (46), bar (49) and the insulator assembly on bolts (45) as shown.
21. Install torque control group (50) on block (40) as shown.
If housing (41) is installed with the flange on bolt (38) on the wrong side
of the dashpot, the riser in the governor will be held in the maximum
fuel delivery position. To prevent possible personal injury, make sure
housing (41) is installed on the fuel injection pump housing with the
flange on bolt (38) behind the dashpot.
22. Install gasket (51) on the fuel injection pump housing. Put housing (41) in position on the fuel
injection pump housing with bolt (38) behind the dashpot as shown. Install the bolts that hold
housing (41) in place.
15/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
28. 23. Use tooling (D) to install lip-type seal (52) in the governor outer housing with the lip in as
shown.
24. Install adjustment screw (53) and the locknut for the high idle adjustment.
25. Make a replacement of screen assembly (54) and seal for fuel ratio control.
26. Install an O-ring seal on body (56) for the dashpot adjustment, and install the body in the
housing.
27. Install gasket and cover (57) on the housing.
28. Install contact (55) in the housing, and tighten to a torque of 4.5 ± 0.6 N·m (40 ± 5 lb.in.).
29. Install check valve (58) in the housing as shown.
16/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. 30. Put lever (59) in position in the housing as shown, and install shaft (60) to hold the lever in
place.
31. Install spring (63) in shaft assembly (64). Install pin (61) in shaft assembly (64) with the tip of
the pin engaged in the hole in spring (63). Install pin (62) in the shaft assembly to hold pin (61) in
place.
32. Put stop (67) and plates (65) in position on shaft assembly (64), and install pins (66) to hold the
plates and stop in place. Install snap rings (68) to hold pins (66) in place.
33. Put levers (69) and (70) in position in the housing as shown, and install shaft assembly (64) to
hold the levers in place.
34. Install adjustment screw (71) and the locknut for the low idle adjustment in the housing. Install
spring (72) in the hole in the shaft assembly and in the housing.
17/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. 35. Use tooling (D) to install the lip-type seal in cover (73) with the lip in as shown.
36. Put the gasket and cover (73) in position on the housing, and install the bolts that hold it in place.
NOTE: Make sure the seal, washers and spring are on top of the lever as shown. These parts must
be kept in this position when housing (79) is put in position on the inner governor housing.
NOTICE
Flat washer (77) must be installed between wave washers (76).
37. Install the governor spring assembly on guide (75) as follows: Install seat (78), one wave washer
(76), flat washer (77), the other wave washer (76) and spring (74) on guide (75) as shown.
18/19
953 TRACK TYPE LOADER 78Y01191-UP (MACHINE) POWERED BY 3204 E...
2021/12/25
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...