The document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and taking out rollers by removing bolts and locks. Reinstallation involves replacing the rollers and guards then adjusting the track tension. Precautions are given for working with pressurized hydraulic systems.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...uufdjjdjfjkkskm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching components using bolts. Precautions are given regarding hydraulic pressure in the track and ensuring paint is removed from contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fjjskkdmnsme
This document provides instructions for servicing track components on a Caterpillar 931B track loader, including:
1) Removing and installing track carrier rollers, which involves loosening the track, removing bolts and the roller, and reversing the process to install.
2) Removing and installing track roller guards, which involves removing nuts and bolts to remove the guards and reversing the process to install.
3) Removing and installing track rollers, which involves loosening the track, lifting the machine, removing bolts and the roller, and reversing the process to install. Precautions are given regarding hydraulic pressure in the track and ensuring clean contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsefkxswksemm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and lockwashers. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching rollers and guards with bolts. Detailed steps are provided for disassembling and assembling the individual components of the track roller assemblies.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsjefskekm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking out bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant to seals, pressing in bearings, and torquing bolts to specified values. Detailed steps are provided for disassembling and assembling the individual components of the rollers.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsekfkksemm
This document provides instructions for servicing track components on a Caterpillar 931B track loader, including:
1) Removing and installing track carrier rollers, which involves loosening the track, removing bolts and the roller, and reversing the steps to install.
2) Removing and installing track roller guards, which involves removing nuts and bolts to remove the guards and reversing the steps to install.
3) Removing and installing track rollers, which involves loosening the track, lifting the machine, removing bolts and the roller, and reversing the steps to install. Precautions are given regarding hydraulic pressure in the track and ensuring clean contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...ujfjjkskkemmd
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching components using bolts. Precautions are given regarding hydraulic pressure in the track and ensuring paint is removed from contact surfaces.
Caterpillar cat 931 b track loader (prefix 29y) service repair manual (29y000...ifkkdmdmdm
This document provides instructions for servicing track rollers and tracks on a Caterpillar 931B track loader. It describes how to:
- Remove and install track rollers, including disassembling and assembling the rollers.
- Separate the tracks by loosening them, installing support brackets, and removing connecting links and shoes.
- Reconnect the tracks by pulling one end onto the sprocket using tools, guiding it over the carrier roller and idler, and reconnecting the split master link.
- Adjust the tracks after reconnecting following specifications in another manual.
Caterpillar cat 931 b track loader (prefix 29y) service repair manual (29y000...fujskekfmsme
This document provides instructions for servicing the tracks and track rollers of a Caterpillar 931B track loader. It describes how to remove and install track rollers, disassemble and assemble track rollers, separate and reconnect tracks, and remove and install front idlers. The procedures include removing guards and covers, loosening the tracks, lifting the machine, and removing and installing components using various tools while following warnings about hydraulic pressure and pin removal. Torques and clearances are specified.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...uufdjjdjfjkkskm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching components using bolts. Precautions are given regarding hydraulic pressure in the track and ensuring paint is removed from contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fjjskkdmnsme
This document provides instructions for servicing track components on a Caterpillar 931B track loader, including:
1) Removing and installing track carrier rollers, which involves loosening the track, removing bolts and the roller, and reversing the process to install.
2) Removing and installing track roller guards, which involves removing nuts and bolts to remove the guards and reversing the process to install.
3) Removing and installing track rollers, which involves loosening the track, lifting the machine, removing bolts and the roller, and reversing the process to install. Precautions are given regarding hydraulic pressure in the track and ensuring clean contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsefkxswksemm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and lockwashers. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching rollers and guards with bolts. Detailed steps are provided for disassembling and assembling the individual components of the track roller assemblies.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsjefskekm
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking out bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant to seals, pressing in bearings, and torquing bolts to specified values. Detailed steps are provided for disassembling and assembling the individual components of the rollers.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...fujsekfkksemm
This document provides instructions for servicing track components on a Caterpillar 931B track loader, including:
1) Removing and installing track carrier rollers, which involves loosening the track, removing bolts and the roller, and reversing the steps to install.
2) Removing and installing track roller guards, which involves removing nuts and bolts to remove the guards and reversing the steps to install.
3) Removing and installing track rollers, which involves loosening the track, lifting the machine, removing bolts and the roller, and reversing the steps to install. Precautions are given regarding hydraulic pressure in the track and ensuring clean contact surfaces.
Caterpillar cat 931 b track loader (prefix 4sc) service repair manual (4sc000...ujfjjkskkemmd
This document provides instructions for removing and installing track carrier rollers, track roller guards, and track rollers on a Caterpillar 931B track loader. It describes loosening the track, removing covers and guards, and then removing rollers by taking off bolts and locks. Reinstallation involves cleaning surfaces, applying lubricant, pressing in bearings, and installing seals before reattaching components using bolts. Precautions are given regarding hydraulic pressure in the track and ensuring paint is removed from contact surfaces.
Caterpillar cat 931 b track loader (prefix 29y) service repair manual (29y000...ifkkdmdmdm
This document provides instructions for servicing track rollers and tracks on a Caterpillar 931B track loader. It describes how to:
- Remove and install track rollers, including disassembling and assembling the rollers.
- Separate the tracks by loosening them, installing support brackets, and removing connecting links and shoes.
- Reconnect the tracks by pulling one end onto the sprocket using tools, guiding it over the carrier roller and idler, and reconnecting the split master link.
- Adjust the tracks after reconnecting following specifications in another manual.
Caterpillar cat 931 b track loader (prefix 29y) service repair manual (29y000...fujskekfmsme
This document provides instructions for servicing the tracks and track rollers of a Caterpillar 931B track loader. It describes how to remove and install track rollers, disassemble and assemble track rollers, separate and reconnect tracks, and remove and install front idlers. The procedures include removing guards and covers, loosening the tracks, lifting the machine, and removing and installing components using various tools while following warnings about hydraulic pressure and pin removal. Torques and clearances are specified.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix NTL) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a Caterpillar 277D Multi Terrain Loader, including the camshaft gear, engine oil pan, pistons, connecting rods, and related parts. Detailed procedures are given for each component, including required tools and torque specifications. Illustrations are included to supplement the written instructions. Safety notices are also provided to ensure safe handling of fluids.
The document provides instructions for disassembling the piston motor (hydrostatic) on a 279C Compact Track Loader. It lists required tools and outlines 27 steps to fully disassemble the component. Key steps include removing retaining rings, springs, pistons, plates, seals, bearings and other internal parts from the head, barrel assembly and shaft. Safety precautions are provided to prevent injury from parts propelled by released spring forces during disassembly.
This document provides instructions for removing and disassembling the piston pump (hydrostatic) on a 279C2 Compact Track Loader. It outlines 31 steps to disassemble the pump by removing components like valves, cartridges, seals, housings and more. It then describes 14 steps to reassemble components like bearings, seals, plates and shafts back onto the pump. Tools required are also listed.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix FMT) Service Repair Manual ...jfkksemmdmd
The document provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including:
1) Removing and installing the diesel particulate filter, which requires disconnecting harness assemblies, removing mounting bolts, and using two people.
2) Removing and installing the inlet manifold, which involves disconnecting hoses and tubes and removing mounting bolts.
3) Procedures for removing and installing inlet and exhaust valve springs safely, which requires using special tools to compress the springs at top dead center.
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft. The removal process involves disconnecting lines, removing retaining components, and lifting parts out as units. Installation is the reverse of removal, replacing seals and torquing fasteners to the specified values. Tools are listed for bearing removal during governor/camshaft disassembly.
Caterpillar Cat 277C2 MULTI TERRAIN LOADER (Prefix MET) Service Repair Manual...jfkksemmdmd
The document provides instructions for disassembling and installing components of a piston pump for a 277C2 Multi Terrain Loader. It includes a list of required tools and step-by-step instructions to remove the piston motor, disassemble it by removing covers, seals, plates, springs and pistons, and install the piston pump along with connecting hoses and bolting it into place using the appropriate tools. Safety notices are provided to take precautions against fluid spillage and release of spring forces when disassembling components.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix MLT) Service Repair Manual ...jfkksemmdmd
1) The document provides instructions for disassembling and assembling the fuel injection pump and governor of a 277D Multi Terrain Loader. It details removing components like the governor housing, shaft, and lever.
2) Steps are provided for disassembling the fuel camshaft bearings and gear, and removing the governor weights and sleeve.
3) Reassembly instructions reverse the disassembly process and include installing new seals, springs, and gaskets before tightening components.
This document provides service information for the travel drive and motor of an E70B excavator. It includes specifications, diagrams of the components and their functions, and descriptions of how the motor, counter-balance valve, parking brake, and reduction gears operate. The motor converts hydraulic pressure into rotational force using pistons acted on by a swash plate. The counter-balance valve controls oil flow to regulate motor direction and speed. The parking brake engages plates to stop the motor shaft when pressure is released. Gears reduce the motor's rotation to turn the excavator tracks.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar EL300 excavator powered by a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reinstalling components in the reverse order of removal while taking care to contain fluids. The fuel transfer pump section also includes instructions for disassembling and assembling the pump components.
The document provides instructions for removing and installing various engine components on a Caterpillar 272D2 skid steer loader, including:
- Inlet and exhaust valves, requiring tools to compress springs and remove parts in the specified order.
- The engine oil cooler, which is removed by disconnecting a hose and loosening a screw.
- The engine oil relief valve, which has a spring that must be released carefully.
- The engine oil pump, removed by taking off cover screws and rotors.
- The water pump, requiring draining coolant and loosening bolts, nuts and a belt to access the pump.
The document provides instructions for removing and installing various engine components on a 272D2 XHP Skid Steer Loader including the oil cooler, engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures include identifying required tools, safety precautions, illustrated steps for removal and disassembly, inspection instructions, and procedures for installation and reassembly.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs to avoid dropping them.
Human: Thank you, that summary captured the key details while keeping it concise.
Caterpillar Cat 277 MULTI TERRAIN LOADER (Prefix CNC) Service Repair Manual (...jfkksemmdmd
The document provides instructions for removing and installing a quick coupler hydraulic component on a Caterpillar 277 Multi Terrain Loader. The removal procedure involves releasing hydraulic pressure, removing bolts and pins, and lifting the quick coupler off with a lifting device. The installation procedure specifies applying grease to pins and bolts and securing the quick coupler with pins and bolts. Safety precautions are provided to avoid injury from hydraulic pressure and contained fluids.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257B3 MULTI TERRAIN LOADER (Prefix B7H) Service Repair Manual...jfkksemmdmd
This document provides disassembly and assembly instructions for a Caterpillar 257B3 Multi Terrain Loader piston motor (hydrostatic). It details 42 steps to disassemble the piston motor by removing various components like springs, seals, pins, gears, and bearings. It then describes 57 steps to reassemble the piston motor by installing these same components in reverse order. Required tools are listed. Images and diagrams accompany the text to illustrate each step.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...jfkksemmdmd
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247B3 MULTI TERRAIN LOADER (Prefix ESL) Service Repair Manual...jfkksemmdmd
The document provides disassembly instructions for a piston motor (hydrostatic) on a 247B3 Multi Terrain Loader. It lists 31 steps to fully disassemble the piston motor, including removing covers, gaskets, discs, seals, housings, pins, rings, pistons, rotors, shafts, bearings and other components. Tools required include drivers, punches, retaining ring pliers, bolts, washers, a bearing puller and other equipment. Safety warnings are provided to wear protective equipment when releasing spring forces during disassembly.
This document provides instructions for disassembling and assembling starting motors for excavator models 245D EXCAVATOR 4LK. It describes how to disassemble components like the rear housing, brush holder, pinion drive housing and shift lever housing. Steps include removing bolts, nuts, seals, bushings and other parts. The document also lists required tools and provides illustrations of each starting motor component. Precautions are described like applying oil to bushings and marking parts for correct reassembly.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...jfkksemmdmd
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
Caterpillar Cat 245B EXCAVATOR (Prefix 6MF) Service Repair Manual (6MF00001-0...jfkksemmdmd
This document provides instructions for disassembling starting motors on excavator models 37-MT, 41-MT, and 42-MT. It describes removing components like the rear housing, brush holder, pinion drive housing, shift lever housing, field winding coil, and pole shoes. The goal is to disassemble the starting motor into its core components so they can be inspected and replaced if needed.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix NTL) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a Caterpillar 277D Multi Terrain Loader, including the camshaft gear, engine oil pan, pistons, connecting rods, and related parts. Detailed procedures are given for each component, including required tools and torque specifications. Illustrations are included to supplement the written instructions. Safety notices are also provided to ensure safe handling of fluids.
The document provides instructions for disassembling the piston motor (hydrostatic) on a 279C Compact Track Loader. It lists required tools and outlines 27 steps to fully disassemble the component. Key steps include removing retaining rings, springs, pistons, plates, seals, bearings and other internal parts from the head, barrel assembly and shaft. Safety precautions are provided to prevent injury from parts propelled by released spring forces during disassembly.
This document provides instructions for removing and disassembling the piston pump (hydrostatic) on a 279C2 Compact Track Loader. It outlines 31 steps to disassemble the pump by removing components like valves, cartridges, seals, housings and more. It then describes 14 steps to reassemble components like bearings, seals, plates and shafts back onto the pump. Tools required are also listed.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix FMT) Service Repair Manual ...jfkksemmdmd
The document provides instructions for removing and installing various engine components on a 277D Multi Terrain Loader, including:
1) Removing and installing the diesel particulate filter, which requires disconnecting harness assemblies, removing mounting bolts, and using two people.
2) Removing and installing the inlet manifold, which involves disconnecting hoses and tubes and removing mounting bolts.
3) Procedures for removing and installing inlet and exhaust valve springs safely, which requires using special tools to compress the springs at top dead center.
The document provides instructions for servicing the fuel injection system and governor/camshaft components of a Caterpillar 903C compact wheel loader. It describes procedures for removing and installing fuel injection lines, nozzles, and the governor/camshaft. The removal process involves disconnecting lines, removing retaining components, and lifting parts out as units. Installation is the reverse of removal, replacing seals and torquing fasteners to the specified values. Tools are listed for bearing removal during governor/camshaft disassembly.
Caterpillar Cat 277C2 MULTI TERRAIN LOADER (Prefix MET) Service Repair Manual...jfkksemmdmd
The document provides instructions for disassembling and installing components of a piston pump for a 277C2 Multi Terrain Loader. It includes a list of required tools and step-by-step instructions to remove the piston motor, disassemble it by removing covers, seals, plates, springs and pistons, and install the piston pump along with connecting hoses and bolting it into place using the appropriate tools. Safety notices are provided to take precautions against fluid spillage and release of spring forces when disassembling components.
Caterpillar Cat 277D MULTI TERRAIN LOADER (Prefix MLT) Service Repair Manual ...jfkksemmdmd
1) The document provides instructions for disassembling and assembling the fuel injection pump and governor of a 277D Multi Terrain Loader. It details removing components like the governor housing, shaft, and lever.
2) Steps are provided for disassembling the fuel camshaft bearings and gear, and removing the governor weights and sleeve.
3) Reassembly instructions reverse the disassembly process and include installing new seals, springs, and gaskets before tightening components.
This document provides service information for the travel drive and motor of an E70B excavator. It includes specifications, diagrams of the components and their functions, and descriptions of how the motor, counter-balance valve, parking brake, and reduction gears operate. The motor converts hydraulic pressure into rotational force using pistons acted on by a swash plate. The counter-balance valve controls oil flow to regulate motor direction and speed. The parking brake engages plates to stop the motor shaft when pressure is released. Gears reduce the motor's rotation to turn the excavator tracks.
The document provides instructions for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar EL300 excavator powered by a 3306 engine. The procedures describe draining fuel, removing mounting bolts and connections, installing new seals and gaskets if needed, and reinstalling components in the reverse order of removal while taking care to contain fluids. The fuel transfer pump section also includes instructions for disassembling and assembling the pump components.
The document provides instructions for removing and installing various engine components on a Caterpillar 272D2 skid steer loader, including:
- Inlet and exhaust valves, requiring tools to compress springs and remove parts in the specified order.
- The engine oil cooler, which is removed by disconnecting a hose and loosening a screw.
- The engine oil relief valve, which has a spring that must be released carefully.
- The engine oil pump, removed by taking off cover screws and rotors.
- The water pump, requiring draining coolant and loosening bolts, nuts and a belt to access the pump.
The document provides instructions for removing and installing various engine components on a 272D2 XHP Skid Steer Loader including the oil cooler, engine oil relief valve, engine oil pump, water pump, water temperature regulator, and flywheel. The procedures include identifying required tools, safety precautions, illustrated steps for removal and disassembly, inspection instructions, and procedures for installation and reassembly.
This document provides instructions for removing and installing the automatic timing advance and fuel injection pump housing & governor on a 245D Excavator with a 3406C diesel engine. It describes in detail the steps to take the components off the engine, including removing mounting bolts, nuts, hoses and other fasteners. The instructions note to cap or plug any openings immediately to prevent contamination. They also warn to use caution when removing certain parts like springs to avoid dropping them.
Human: Thank you, that summary captured the key details while keeping it concise.
Caterpillar Cat 277 MULTI TERRAIN LOADER (Prefix CNC) Service Repair Manual (...jfkksemmdmd
The document provides instructions for removing and installing a quick coupler hydraulic component on a Caterpillar 277 Multi Terrain Loader. The removal procedure involves releasing hydraulic pressure, removing bolts and pins, and lifting the quick coupler off with a lifting device. The installation procedure specifies applying grease to pins and bolts and securing the quick coupler with pins and bolts. Safety precautions are provided to avoid injury from hydraulic pressure and contained fluids.
Caterpillar Cat 257D MULTI TERRAIN LOADER (Prefix FMR) Service Repair Manual ...jfkksemmdmd
This document provides instructions for removing and installing various engine components on a 257D Multi Terrain Loader, including:
- Engine oil relief valve - describes loosening a plug and removing spring and plunger components
- Engine oil pump - removing screws and covers to access inner and outer rotor components
- Water pump - removing bolts and pulley to access the pump and replace the gasket
- Water temperature regulator - disconnecting hoses and removing bolts, gasket, and regulator component
- Flywheel - removing bolts, dowels and flywheel component
The procedures provide illustrations and specify torque values for reinstallation. Safety and cleaning notes are included.
Caterpillar Cat 257B3 MULTI TERRAIN LOADER (Prefix B7H) Service Repair Manual...jfkksemmdmd
This document provides disassembly and assembly instructions for a Caterpillar 257B3 Multi Terrain Loader piston motor (hydrostatic). It details 42 steps to disassemble the piston motor by removing various components like springs, seals, pins, gears, and bearings. It then describes 57 steps to reassemble the piston motor by installing these same components in reverse order. Required tools are listed. Images and diagrams accompany the text to illustrate each step.
Caterpillar Cat 247 MULTI TERRAIN LOADER (Prefix CML) Service Repair Manual (...jfkksemmdmd
This document provides instructions for removing and installing the lift cylinder and lift arms on a 247 Multi Terrain Loader. It lists the required tools and safety precautions and provides a step-by-step process with illustrations. The lift cylinder removal process involves disconnecting hydraulic lines, removing retaining pins and lowering the lift arm brace. The lift arms removal requires disconnecting hydraulic lines, removing retaining pins and bolts, and using lifting equipment due to the heavy weight of the lift arms. Reinstallation follows the reverse order.
Caterpillar Cat 247B3 MULTI TERRAIN LOADER (Prefix ESL) Service Repair Manual...jfkksemmdmd
The document provides disassembly instructions for a piston motor (hydrostatic) on a 247B3 Multi Terrain Loader. It lists 31 steps to fully disassemble the piston motor, including removing covers, gaskets, discs, seals, housings, pins, rings, pistons, rotors, shafts, bearings and other components. Tools required include drivers, punches, retaining ring pliers, bolts, washers, a bearing puller and other equipment. Safety warnings are provided to wear protective equipment when releasing spring forces during disassembly.
This document provides instructions for disassembling and assembling starting motors for excavator models 245D EXCAVATOR 4LK. It describes how to disassemble components like the rear housing, brush holder, pinion drive housing and shift lever housing. Steps include removing bolts, nuts, seals, bushings and other parts. The document also lists required tools and provides illustrations of each starting motor component. Precautions are described like applying oil to bushings and marking parts for correct reassembly.
Caterpillar Cat 245B SERIES II EXCAVATOR (Prefix 6MF) Service Repair Manual (...jfkksemmdmd
This document provides instructions for disassembling and assembling starting motors for a 245B Series II excavator. It describes removing components like the rear housing, brush holder, pinion drive housing, and shift lever housing. Tools needed are listed. Detailed photos show each step, such as lifting brush springs, removing retaining rings, and cleaning parts with mineral spirits. Instructions are provided for both 42-MT and 37-MT/41-MT style starting motors.
Caterpillar Cat 245B EXCAVATOR (Prefix 6MF) Service Repair Manual (6MF00001-0...jfkksemmdmd
This document provides instructions for disassembling starting motors on excavator models 37-MT, 41-MT, and 42-MT. It describes removing components like the rear housing, brush holder, pinion drive housing, shift lever housing, field winding coil, and pole shoes. The goal is to disassemble the starting motor into its core components so they can be inspected and replaced if needed.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 931B TRACK LOADER 4SC
Configuration: 931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
D3B TRACTOR & 931B TRACTOR TYPE LOADER POWER TRAIN
Media Number -SENR7918-02 Publication Date -01/11/2004 Date Updated -15/02/2017
SENR79180003
Track Carrier Rollers
SMCS - 4154-016; 4154-010; 4154-015
Remove And Install Track Carrier Rollers
1. Remove cover (1).
The adjuster cylinder for the track is under high hydraulic pressure. Do
not visually inspect the relief valve to see if grease is released when it is
open. Look to see that the track has loosened. Use this warning any time
the tracks are loosened or tightened.
1/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. 2. Loosen the track as follows:
a. Turn the relief valve (2) one turn counterclockwise to permit grease to be released from the vent
hole below the relief valve. If the track does not loosen, go to Step b.
b. Turn fill valve (3) one turn counterclockwise to permit grease to be released from the vent hole
below the fill valve. If the track still does not loosen, start the machine and move it forward and
backward. If grease is still not released, go to Step c.
c. Install a slug that is 76.2 mm (3 in) in diameter 63.5 mm (2.5 in) long between the track and
sprocket segment. Move the machine to the rear so the track will be pushed up by the bar. This will
put tension on the track and move the front idler and track adjuster to the rear against the force of the
recoil spring. This will push grease out of the vent holes.
3. Install tool (A). Make sure the end of the hydraulic jack is in contact with the flat part of the
grouser shoe.
4. Lift the track with tool (A) until it is off of the carrier roller.
5. Remove two bolts and lockwashers (4). Remove carrier roller (5). Weight is 16 kg (35 lb).
NOTE: The following steps are for installation of track carrier rollers.
2/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. 6. Put carrier roller (5) in position on the bracket with the dowels in alignment with holes (6). Install
the two lockwashers and bolts that hold it in position.
7. Remove tool (A).
8. Make an adjustment to the track. See the topic, Track Adjustment.
9. Install cover (1) over the hydraulic track adjuster.
Disassemble Track Carrier Rollers
Start By:
a. remove track carrier rollers
1. Remove cover (1) and the gasket from the track carrier roller (2).
2. Drain the oil from the roller.
3/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 3. Remove two bolts (3) and lock (4). Remove the plate.
4. Use tooling (A) to push shaft assembly (6) out of the roller. Remove bearing cone (5) from the
roller.
5. Use tooling (B) to remove bearing cups (7) from the roller.
6. Remove spiral snap ring (8) from the shaft.
4/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 7. Remove collar (9) and Duo-Cone seals (10) from the shaft.
8. Remove O-ring seal (11) from the shaft.
9. Use tooling (C) to remove bearing cone (12) from the shaft.
Assemble Track Carrier Rollers
5/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. 1. Use tooling (B) and a press to install the bearing cups in the roller.
2. Heat bearing cone (12) to a maximum temperature of 135° C (275° F). Install the cone on shaft
(6).
3. Install O-ring seal (11) on the shaft.
4. Install roller (2) on the shaft.
6/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. 5. Heat bearing cone (5) to a maximum temperature of 135° C (275° F). Install the cone on the shaft.
NOTE: Assemble ground face of the plate to the end of the shaft and bearing.
6. Put plate in position on the shaft and install lock (4) and the bolts (3) that hold it in place. Bend
the ends of the lock against the bolt heads.
NOTE: See the topic, Installation Of Conventional Duo-Cone Seals, before installing any of the
Duo-Cone seals.
NOTE: The rubber seals and all surfaces that make contact with the seals must be clean and dry.
After installation of the seals, put oil on the contact surfaces of the metal seals.
7. Use tooling (D) to install the Duo-Cone seal in the roller and collar.
8. Put oil on the O-ring seal on the shaft and on the seal surface of the collar assembly.
7/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 9. Install collar (9) on the shaft. Install tooling (C) on the roller as shown. Put Duo-Cone seal under
compression with tooling (C) until the spiral spring ring can be installed on the shaft.
10. Install spring ring (8) on the shaft.
11. Put 250 cc (.53 pint) of clean 30 SAE oil in the roller assembly and put the gasket and cover (10)
in position. Install the five lockwashers and bolts that hold the cover in position.
End By:
a. install track carrier rollers
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 7 15:21:06 UTC+0800 2019
8/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 931B TRACK LOADER 4SC
Configuration: 931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
D3B TRACTOR & 931B TRACTOR TYPE LOADER POWER TRAIN
Media Number -SENR7918-02 Publication Date -01/11/2004 Date Updated -15/02/2017
SENR79180004
Track Roller Guards
SMCS - 7152-010
Remove And Install Track Roller Guards
1. Remove six nuts and lockwashers (1).
2. Put two block in position under track roller guard (2).
3. Remove ten bolts and lockwashers (3). Remove the track roller guard.
4. Remove six spacers and bolts (4).
1/2
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. 5. Put two block under inside track roller guard (6). Remove ten bolts and lockwashers (5).
6. Remove the track roller guard.
NOTE: The following steps are for the installation of the track roller guards.
7. Put inside track roller guard (6) in position and use two blocks to hold the guard in position.
8. Install the ten lockwashers and bolts (5) that hold the inside guard in position.
9. Install six bolts through the inside guard. Put spacers (4) over the bolts.
10. Put outside track roller guard (2) in position and use two blocks to hold the guard in position.
11. Install the ten lockwashers and bolts (3) that hold the outside guard in position.
12. Install six lockwashers and nuts (1). Remove the blocks.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 7 15:21:47 UTC+0800 2019
2/2
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 931B TRACK LOADER 4SC
Configuration: 931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
D3B TRACTOR & 931B TRACTOR TYPE LOADER POWER TRAIN
Media Number -SENR7918-02 Publication Date -01/11/2004 Date Updated -15/02/2017
SENR79180005
Track Rollers
SMCS - 4108-010; 4108-015; 4180-016
Remove And Install Track Rollers
Start By:
a. remove track roller guards
1. Remove cover (1).
The adjuster cylinder for the track is under high hydraulic pressure. Do
not visually inspect the relief valve to see if grease is released when it is
open. Look to see that the track has loosened. Use this warning any time
the tracks are loosened or tightened.
1/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. 2. Loosen the track as follows:
a. Turn the relief valve (2) one turn counterclockwise to permit grease to be released from the vent
hole below the relief valve. If the track does not loosen, go to Step b.
b. Turn fill valve (3) one turn counterclockwise to permit grease to be released from the vent hole
below the fill valve. If the track still does not loosen, start the machine and move it forward and
backward. If grease is still not released, go to Step c.
c. Install a slug that is 76.2 mm (3 in) in diameter and 63.5 mm (2.5 in) long between the track and
sprocket segment. Move the machine to the rear so the track will be pushed up by the bar. This will
put tension on the track and move the front idler and track adjuster to the rear against the force of the
recoil spring. This will push grease out of the vent holes.
3. Lift the machine until the track rollers are off the track. Put tooling (A) or wood blocks in position
under the machine.
4. Remove four bolts and lockwashers (4). Remove track roller (5). Weight is 22 kg (48 lbs).
NOTE: The following steps are for installation of track rollers.
NOTICE
2/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Remove all paint from the surfaces of the track roller and track roller
frame that make contact. If there is paint between the track roller and
track roller frame, the bolts that hold the track roller in place can
loosen.
5. Put track roller (5) in position. Install the four lockwashers and bolts that hold the roller in place.
Tighten the bolts to a torque of 135 ± 20 N·m (101 ± 15 lb ft).
6. Remove tooling (A) or wood blocks from under the machine.
7 Make an adjustment to the track. See the Topic, Track Adjustment.
8. Put cover (1) in position and install the bolts that hold it in position.
End By:
a. install track roller guards
Disassemble Track Rollers
Start By:
a. remove track rollers
1. Remove the drain plug and drain oil from the track roller.
2. Use tooling (A) to put the track roller under compression so ring (1) can be removed. Remove the
ring. Remove tooling (A).
3/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 3. Use a brass bar and hammer to push shaft (2) through the roller.
4. Remove collar (3) and washer (4) from the shaft.
5. Remove Duo-Cone seal (5) from the collar.
6. Remove the shaft and other collar from the roller. Remove the washer from the shaft.
7. Remove ring (8). Remove collar (6) from the shaft. Remove O-ring seals (7) from the shaft.
8. Remove Duo-Cone seal (9) from the collar.
9. Remove Duo-Cone seals (10) from the collar.
4/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. 10. Install tooling (B) in the roller to remove the bearing assemblies.
11. Use tooling (B) and a press to remove bearing assemblies (11) from the roller.
12. Use tooling (C) and a press to remove the bearing from bearing assemblies (11).
Assemble Track Rollers
5/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. 1. Use tooling (C) and a press to install bearings (12) in the bearing assemblies with the holes in the
bearings in alignment with holes (13) in the bearing assemblies.
2. Use tooling (D) and a press to install bearing assemblies (11) in the roller.
NOTE: See the topic, Installation Of Conventional Duo-Cone Seals, before installing any of the
Duo-Cone seals.
NOTE: The rubber seals and all surfaces that make contact with the seals must be clean and dry
with no damage to the surface. After installation of the seals, put oil on the contact surfaces of the
Duo-Cone seals. Put lubrication on all other seals at assembly
3. Use tooling (F) to install Duo-Cone seals in roller (14) and collars (3) and (6).
6/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 4. Install O-ring seals (7) on the roller shaft. Install roller shaft in the collar.
5. Install ring (8) to hold the collar on the shaft.
6. Install washer (15) on the roller shaft with the oil grooves away from the collar.
7. Install roller shaft (16) with the washer and collar in the roller.
7/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 8. Install washer (4) on the shaft with the oil grooves toward the roller.
9. Install the other collar (3) in the roller shaft.
10. Install tooling (E) on the track roller as shown. Put the roller under compression and install ring
(1). Remove tooling (E).
11. Remove plug (17). Put 280 cc (.6 pint) of clean SAE 30 oil in the roller. Install plug (17).
End By:
a. install track roller
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 7 15:22:28 UTC+0800 2019
8/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 931B TRACK LOADER 4SC
Configuration: 931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
D3B TRACTOR & 931B TRACTOR TYPE LOADER POWER TRAIN
Media Number -SENR7918-02 Publication Date -01/11/2004 Date Updated -15/02/2017
SENR79180006
Tracks
SMCS - 4170-016; 4170-077
Separation of Tracks
NOTE: This operation was done on the 931B.
1. Remove cover (1).
1/5
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. The adjuster cylinder for the track is under high hydraulic pressure. Do
not visually inspect the relief valve to see if grease is released when it is
open. Look to see that the track has loosened. Use this warning any time
the tracks are loosened or tightened.
2. Loosen the track as follows:
a. Turn relief valve (2) one turn counterclockwise to permit grease to be released from the vent hole
below the relief valve. If the track does not loosen, go to Step b.
b. Turn fill valve one turn counterclockwise to permit grease to be released from the vent hole below
the fill valve. If the track still does not loosen, start the machine and move it forward and backward.
If grease is still not released, go to Step c.
c. Install slug (4) that is 76.2 mm (3 in) in diameter and 63.5 mm (2.5 in) long between the track and
sprocket segment. Move the machine to the rear so the track will be pushed up by the bar. This will
put tension on the track and move the front idler and track adjuster to the rear against the force of the
recoil spring. This will push grease out of the vent holes.
3. Install support bracket (4). See the topic, Install And Remove Support Bracket (931B).
2/5
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. 4. Start the machine and move split master link (5) to the rear of the machine. Install tool (A) under
the grouser of the shoe just under the master shoe. Move the machine slowly backward until the
track is tight against tool (A).
5. Remove two bolts (8) that hold the shoe below the master shoe. The bolts must be removed to
install the tooling for connection of the tracks.
6. Remove four bolts (6) and remove master shoe (7).
Keep away from the front and rear of the machine when the track is
pushed off of the track carrier roller and idler.
3/5
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. 7. Start the machine and drive slowly forward to remove track (9).
Connection Of Tracks
Keep away from the area behind the sprocket when the track is pulled
on the sprocket with tooling (B).
1. Put the machine in position on the track with the sprocket near the end of the track. Install tooling
(B) on the track and sprocket as shown. Drive the machine forward and pull the track on to the
sprocket with tooling (B) until the track is forward of a vertical center line through the sprocket.
2. Remove tooling (B) and install tool (C) on the track as shown. Fasten a hoist. Move the machine
and track forward. Use the hoist and tool (C) as a guide for the track over the carrier roller and idler.
4/5
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 3. Remove tool (C) and install tool (A) under the grouser shoe split master link (5). Drive the
machine forward to tighten the track against tool (A). Make a connection of the split master link (5).
4. Put 30W oil on the threads and install bolts (8). Tighten the bolts to a torque of 90 ± 20 N·m (65 ±
15 lb ft). Then tighten the bolts an additional 120°.
5. Install master shoe (7). Put 5P3931 Anti-Seize Compound on the threads of the bolts that hold
master shoe in place. Install the bolts and tighten to a torque of 90 ± 20 N·m (65 ± 15 lb ft), then
tighten an additional 180°.
6. Make an adjustment to the track. See the topic, Track Adjustment in the Specifications Service
Manual. For the D3B, see Form No. SMHS7915. For 931B, see Form No. SMHS7929.
7. Install the cover over the hydraulic track adjuster.
8. Remove the support bracket. See the topic, Install And Remove Support Bracket (931B).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 7 15:23:10 UTC+0800 2019
5/5
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: TRACK LOADER
Model: 931B TRACK LOADER 4SC
Configuration: 931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MACHINE) POWERED BY 3204 ENGINE
Disassembly and Assembly
D3B TRACTOR & 931B TRACTOR TYPE LOADER POWER TRAIN
Media Number -SENR7918-02 Publication Date -01/11/2004 Date Updated -15/02/2017
SENR79180007
Front Idlers
SMCS - 4159-010; 4159-015; 4159-016
Remove And Install Front Idlers
Start By:
a. separation of tracks
1. Remove cover (1) from the track roller frame.
NOTE: Put identification on shims for correct installation.
2. Remove plates (3) and shims (2) from each side of the idler.
1/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. 3. Remove four bolts (4) that hold the idler to the yoke assembly.
4. Fasten two nylon straps as shown to the idler. Fasten a hoist and slide idler (5) forward and
remove idler (5) from the track roller frame. The weight is 81 kg (180 lb).
NOTE: The following steps are for the installation of the front idlers.
5. Fasten two nylon straps and a hoist to idler (5). Put the idler in position on the track roller frame.
6. Install four bolts (4) that hold the idler to the yoke assembly.
7. Install original shims (2) and plates (3) on each side of the idler.
8. Use feeler gauge (6) to check the clearance between plate (3) and the track roller frame. Remove
or add shims (2) as needed to get a clearance of 1.5 mm (.06 in) between the plates and track roller
frame.
9. Install cover (1).
End By:
a. connection of tracks
Disassemble Front Idlers
2/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. Start By:
a. remove front idler
1. Remove plug and drain oil from idler. Install plug. Remove bolt and washer (1).
2. Install a 3/8" - 16 NC forcing screw (2) in the pin. Push the pin from the bearing with a hammer.
3. Remove bearing (3) from the front idler.
NOTE: Keep Duo-Cone seal group together for correct assembly.
4. Remove outer half of Duo-Cone seal (4) from the bearing.
3/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
29. 5. Remove O-ring seal (5) from the shaft.
6. Remove washer (6). Remove inner half of Duo-Cone seal (7) from the idler.
7. Turn the idler as shown and remove bearing (8) and the shaft.
8. Remove bolt and washer (9). Do Step 2 to remove the pin.
9. Remove shaft (11) from the bearing. Remove the O-ring seal from the shaft.
10. Remove outer half of Duo-Cone seal (10) from the bearing.
11. Remove washer (12). Remove inner half of Duo-Cone seal (13).
4/8
931B AND 931B LGP TRACK LOADERS / DIRECT DRIVE / 4SC00001-UP (MAC...
2019/9/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...