This document provides instructions for assembling pistons and connecting rods for a Caterpillar 3304 engine. The steps include cleaning parts, installing connecting rod bearings, lubricating and inserting piston pins, and installing piston rings in the proper order and orientation. Instructions are also provided for installing the pistons and connecting rods into the engine, checking connecting rod bearing clearance, and torquing connecting rod cap nuts.
This document provides instructions for assembling pistons and connecting rods for a Caterpillar 3304 engine. The steps include cleaning parts, installing connecting rod bearings, lubricating and inserting piston pins, and installing piston rings in the proper order and orientation. Instructions are also provided for installing the pistons and connecting rods into the engine, checking connecting rod bearing clearance, and reinstalling other engine components.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...ufjjsjekkmdme
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Detailed steps are given for disassembling and assembling pistons and connecting rods
The instructions are part of a service repair manual for technicians performing maintenance on the skidder's 3304 engine.
Caterpillar cat 936 e wheel loader (prefix 33z) service repair manual (33z030...ufjkskemfseol
This document provides instructions for removing and installing the flywheel housing on a Caterpillar 936E wheel loader with a 3304 engine. It describes:
1) Removing the flywheel, crankshaft rear seal, oil pan plate bolts, and flywheel housing bolts to remove the housing.
2) Cleaning parts and installing the housing with bolts, checking gaskets, and reinstalling components like the oil pan plate.
3) The process involves several specific steps and the use of tools to safely and properly remove and replace the flywheel housing.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 140 h na motor grader (prefix 2zk) service repair manual (2zk...udfjjsjekdkdmm
This document provides instructions for removing and installing pistons, connecting rods, and crankshaft main bearings for a Caterpillar 3306 engine. The removal process involves turning the crankshaft to access components, removing connecting rod caps and bearings, and using tools to remove upper bearing halves. Installation requires cleaning parts, lubricating with oil, and torquing connecting rod nuts to the specified values.
Caterpillar cat 163 h na motor grader (prefix 5ak) service repair manual (5ak...fjsjekdmmeme
The document provides instructions for installing piston connecting rod bearings in a 3306 engine used in a 163H motor grader. It describes cleaning and lubricating the parts, positioning the bearings and connecting rods, and torquing the connecting rod cap nuts. Clearance checks are to be done using Plastigage gauges before final assembly with engine oil. The procedure is to be repeated for each connecting rod and bearing.
The document describes Pulnikov EC's new IE5+ series of asynchronous motors that achieve the IE5 efficiency class. It provides an overview of the development of the IE5+ series, including the design strategies used to reach IE5 efficiency while maintaining normal starting torque, acceptable motor mass, and conventional manufacturing techniques. Motor data is presented for 2-pole, 4-pole, 6-pole, and 8-pole IE5+ motor designs ranging from 0.09 kW to 355 kW, including efficiency levels, power factors, torque characteristics, and materials usage. The economic benefits of replacing conventional IE3 motors with IE5+ motors are also discussed.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
This document provides instructions for assembling pistons and connecting rods for a Caterpillar 3304 engine. The steps include cleaning parts, installing connecting rod bearings, lubricating and inserting piston pins, and installing piston rings in the proper order and orientation. Instructions are also provided for installing the pistons and connecting rods into the engine, checking connecting rod bearing clearance, and reinstalling other engine components.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...ufjjsjekkmdme
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Detailed steps are given for disassembling and assembling pistons and connecting rods
The instructions are part of a service repair manual for technicians performing maintenance on the skidder's 3304 engine.
Caterpillar cat 936 e wheel loader (prefix 33z) service repair manual (33z030...ufjkskemfseol
This document provides instructions for removing and installing the flywheel housing on a Caterpillar 936E wheel loader with a 3304 engine. It describes:
1) Removing the flywheel, crankshaft rear seal, oil pan plate bolts, and flywheel housing bolts to remove the housing.
2) Cleaning parts and installing the housing with bolts, checking gaskets, and reinstalling components like the oil pan plate.
3) The process involves several specific steps and the use of tools to safely and properly remove and replace the flywheel housing.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 140 h na motor grader (prefix 2zk) service repair manual (2zk...udfjjsjekdkdmm
This document provides instructions for removing and installing pistons, connecting rods, and crankshaft main bearings for a Caterpillar 3306 engine. The removal process involves turning the crankshaft to access components, removing connecting rod caps and bearings, and using tools to remove upper bearing halves. Installation requires cleaning parts, lubricating with oil, and torquing connecting rod nuts to the specified values.
Caterpillar cat 163 h na motor grader (prefix 5ak) service repair manual (5ak...fjsjekdmmeme
The document provides instructions for installing piston connecting rod bearings in a 3306 engine used in a 163H motor grader. It describes cleaning and lubricating the parts, positioning the bearings and connecting rods, and torquing the connecting rod cap nuts. Clearance checks are to be done using Plastigage gauges before final assembly with engine oil. The procedure is to be repeated for each connecting rod and bearing.
The document describes Pulnikov EC's new IE5+ series of asynchronous motors that achieve the IE5 efficiency class. It provides an overview of the development of the IE5+ series, including the design strategies used to reach IE5 efficiency while maintaining normal starting torque, acceptable motor mass, and conventional manufacturing techniques. Motor data is presented for 2-pole, 4-pole, 6-pole, and 8-pole IE5+ motor designs ranging from 0.09 kW to 355 kW, including efficiency levels, power factors, torque characteristics, and materials usage. The economic benefits of replacing conventional IE3 motors with IE5+ motors are also discussed.
Caterpillar cat 140 g motor grader (prefix 72v) service repair manual (72v042...fusefjskekkmem
This document provides instructions for removing and installing a camshaft on a Caterpillar 3306 engine. It describes in detail:
1) Marking the gears to ensure proper timing when reinstalling the camshaft.
2) Removing the camshaft bolts and carefully pulling out the camshaft.
3) Cleaning and lubricating the camshaft lobes and bearings before reinstalling.
4) Aligning the timing marks and installing the camshaft bolts to complete the process.
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating bearings during assembly.
The procedures provide detailed steps and illustrations for servicing internal engine components according to the manufacturer's specifications. Safety notices are included to handle parts carefully and prevent contamination.
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating bearings during assembly.
The procedures provide detailed steps and illustrations for servicing internal engine components like pistons, connecting rods, and bearings according to the manufacturer's specifications.
This document provides instructions for servicing the connecting rod bearings on a 527 Track Skidder powered by a 3304 engine. It describes how to remove the connecting rod bearings by removing the connecting rod caps and pushing the rods into the cylinder liners. It then explains how to install new bearings by aligning the bearing tabs, checking clearance with Plastigage, and torquing the connecting rod cap nuts. The summary provides an overview of the bearing removal and installation processes.
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating properly before final assembly.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fujsjfkskemm
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder, including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Disassembling and assembling pistons and connecting rods
The instructions include detailed steps and notes about identification marks, tooling used, torque specifications, and clearance checks.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...uudjfjjdkkksmm
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder, including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Disassembling and assembling pistons and connecting rods
The instructions include detailed steps and notes about identification marks, tooling used, torque specifications, and clearance checks.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, cleaning, lubrication steps, and proper tool usage. Removal involves disassembling the engine down to the cylinder block, while installation requires reassembling components in the reverse order. Precautions are provided to prevent damage during disassembly and assembly.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjkskekdmmenm
This document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder including:
- Valves, valve guides, valve seat inserts, and water directors from the cylinder head
- Pistons, connecting rods, piston pins, and piston rings
- Detailed steps are provided for disassembling each component and preparing them for installation, as well as installing them back onto the engine.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjekksemm
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, torque specifications, and safety precautions. The procedures include removing fuel injectors and cylinder head, checking spring force, cleaning parts, applying lubricants, and reassembling components in the proper order.
New holland d180 c pat tier 2 crawler dozer service repair manualjjdfjkkskmmed
This service manual section provides instructions for removing and installing the engine on a D180C Crawler Dozer. The removal process involves detaching the engine from mounting brackets and lifting it away from the frame using lifting equipment. The installation involves cleaning threads, applying threadlock to bolts, and securing the engine flexible coupling to the flywheel before lowering the engine back into position on the frame. Proper lifting and installation are emphasized to prevent injury or damage.
New holland d125 c stage iiib crawler dozer service repair manual (pin nddc12...jjdfjkkskmmed
The document is a service manual that provides instructions for removing the engine from a D125C crawler dozer. It outlines 14 steps for removing components to fully separate the engine, including disconnecting electrical connections, hoses, and removing mounting hardware. The overall process allows for the engine to be fully removed from the dozer for service or replacement.
New holland cx8060 combine harvesters service repair manualjjdfjkkskmmed
The primary hydraulic power system uses a variable displacement pump to power the work hydraulics and steering. Oil is filtered and distributed to valves controlling header height, reel functions, and other components. It is linked to the hydrostatic system, sharing a reservoir and using hydrostatic return oil as charge pressure. Key components include the pump, filters, relief valves, and control valves.
New holland cx7090 elevation combine harvesters service repair manualjjdfjkkskmmed
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New holland cx5090 hillside tier 4 combine harvester service repair manualjjdfjkkskmmed
The document is a service manual that provides information on hydraulic, pneumatic, electrical and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details of the primary hydraulic system including three hydraulic pumps that power different circuits.
- A hydraulic schematic showing the layout of components in the hydraulic system.
- Images and descriptions locating hydraulic components on the front of the machine.
New holland cr9080 combine harvesters service repair manualjjdfjkkskmmed
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting guides, and procedures for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosing issues, and repairing or replacing parts.
New holland c227 tier 4 b (final) compact track loader service repair manual ...jjdfjkkskmmed
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety warnings for lifting heavy components, handling hot fluids, and avoiding skin contact with engine oil.
- Illustrations and part numbers for access covers, drain plugs, caps, and fittings involved in the oil drain process.
New holland b110 c four wheel drive (4wd) tier 4b (final) tractor loader back...jjdfjkkskmmed
This document provides service information for New Holland B95C, B95C LR, B95C TC, and B110C tractor loader backhoes, including specifications for the Tier 4B compliant engines. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection. Engine details and specifications are provided for the B95C and B110C models. The document contains sections covering the engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, attachments, and safety information.
The document provides instructions for removing and installing components of a Caterpillar 527 track skidder, including:
- Removing the grapple crosshead by removing a bolt/retainer and separating the crossblock.
- Removing an arch cylinder by disconnecting hoses, removing retaining pins and bolts, and lifting the cylinder off.
- Disassembling the arch cylinder by removing seals, bearings, and other components.
- Reassembling the arch cylinder by replacing any worn parts and reinstalling components in reverse order.
- Removing an arch by disconnecting hoses, removing retaining pins and bolts, and lifting the arch off after supporting it.
This document provides removal and installation instructions for removing and installing a radiator on a Caterpillar 527 Track Skidder. It describes removing guards, disconnecting hoses, removing bolts, and lifting out the radiator using lifting tools. The installation procedure reverses these steps, ensuring all connections are secure. Safety notices are provided regarding containing fluids, preventing contamination, and handling refrigerant. Removal and installation of the fan and fan drive are also described.
1. The document provides instructions for removing and installing various components of the 518 Series II Wheel Skidder powered by a 3304 engine, including tires and rims, wheels and wheel spindles, axles, front wheel brakes, and final drives.
2. The procedures include removing nuts and bolts, draining fluids, using specialty tools to press components out or install seals, and specifying torque specifications for reinstallation.
3. Technicians are advised to inspect seals for damage and replace as needed, apply anti-seize compound, and bleed brake lines after reinstallation of brakes.
This document provides instructions for removing and installing the fuel injection pump housing and governor from a Caterpillar 3304B engine. It outlines the required tools and gives step-by-step procedures with illustrations. The procedures include removing the housing, disassembling it to access internal components like bearings and camshaft, cleaning all parts, assembling the housing with new or original parts as needed, and installing the reassembled housing back onto the engine. Precautions are given to keep all parts clean and apply oil before assembly.
The document provides instructions for removing and installing an axle housing and flange on a 434F2 backhoe loader. The removal process involves removing bolts, nuts, plates, rings and shafts using various tools. Individual components like bearings, seals and bushings are then removed from the housing and flange. The assembly process reverses the removal steps, applying grease and torquing bolts to the specified values.
More Related Content
Similar to Caterpillar cat 527 track skidder (prefix 3 ds) service repair manual (3ds00001 and up)
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating bearings during assembly.
The procedures provide detailed steps and illustrations for servicing internal engine components according to the manufacturer's specifications. Safety notices are included to handle parts carefully and prevent contamination.
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating bearings during assembly.
The procedures provide detailed steps and illustrations for servicing internal engine components like pistons, connecting rods, and bearings according to the manufacturer's specifications.
This document provides instructions for servicing the connecting rod bearings on a 527 Track Skidder powered by a 3304 engine. It describes how to remove the connecting rod bearings by removing the connecting rod caps and pushing the rods into the cylinder liners. It then explains how to install new bearings by aligning the bearing tabs, checking clearance with Plastigage, and torquing the connecting rod cap nuts. The summary provides an overview of the bearing removal and installation processes.
This document provides instructions for servicing parts of the 3304 engine that powers a 527 Track Skidder, including:
- Assembling pistons and connecting rods, ensuring marks are aligned and retaining rings and bearings are securely installed.
- Installing pistons and connecting rods in the engine, lubricating parts and torquing connecting rod nuts to the specified value.
- Removing and installing connecting rod and crankshaft main bearings, checking clearances and lubricating properly before final assembly.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fujsjfkskemm
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder, including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Disassembling and assembling pistons and connecting rods
The instructions include detailed steps and notes about identification marks, tooling used, torque specifications, and clearance checks.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...uudjfjjdkkksmm
The document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder, including:
- Removing and installing valves, valve guides, valve seat inserts, and water directors
- Removing and installing pistons, connecting rods, and piston rings
- Disassembling and assembling pistons and connecting rods
The instructions include detailed steps and notes about identification marks, tooling used, torque specifications, and clearance checks.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, cleaning, lubrication steps, and proper tool usage. Removal involves disassembling the engine down to the cylinder block, while installation requires reassembling components in the reverse order. Precautions are provided to prevent damage during disassembly and assembly.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjkskekdmmenm
This document provides instructions for removing and installing various engine components on a Caterpillar D5H Track-Type Skidder including:
- Valves, valve guides, valve seat inserts, and water directors from the cylinder head
- Pistons, connecting rods, piston pins, and piston rings
- Detailed steps are provided for disassembling each component and preparing them for installation, as well as installing them back onto the engine.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjekksemm
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, torque specifications, and safety precautions. The procedures include removing fuel injectors and cylinder head, checking spring force, cleaning parts, applying lubricants, and reassembling components in the proper order.
Similar to Caterpillar cat 527 track skidder (prefix 3 ds) service repair manual (3ds00001 and up) (9)
New holland d180 c pat tier 2 crawler dozer service repair manualjjdfjkkskmmed
This service manual section provides instructions for removing and installing the engine on a D180C Crawler Dozer. The removal process involves detaching the engine from mounting brackets and lifting it away from the frame using lifting equipment. The installation involves cleaning threads, applying threadlock to bolts, and securing the engine flexible coupling to the flywheel before lowering the engine back into position on the frame. Proper lifting and installation are emphasized to prevent injury or damage.
New holland d125 c stage iiib crawler dozer service repair manual (pin nddc12...jjdfjkkskmmed
The document is a service manual that provides instructions for removing the engine from a D125C crawler dozer. It outlines 14 steps for removing components to fully separate the engine, including disconnecting electrical connections, hoses, and removing mounting hardware. The overall process allows for the engine to be fully removed from the dozer for service or replacement.
New holland cx8060 combine harvesters service repair manualjjdfjkkskmmed
The primary hydraulic power system uses a variable displacement pump to power the work hydraulics and steering. Oil is filtered and distributed to valves controlling header height, reel functions, and other components. It is linked to the hydrostatic system, sharing a reservoir and using hydrostatic return oil as charge pressure. Key components include the pump, filters, relief valves, and control valves.
New holland cx7090 elevation combine harvesters service repair manualjjdfjkkskmmed
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting procedures, and instructions for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. It is intended to help technicians maintain and repair CNH Industrial CR and CX series combines.
New holland cx5090 hillside tier 4 combine harvester service repair manualjjdfjkkskmmed
The document is a service manual that provides information on hydraulic, pneumatic, electrical and electronic systems for CX5000 and CX6000 series equipment. It includes:
- Specifications and torque values for hydraulic fittings and connections.
- Details of the primary hydraulic system including three hydraulic pumps that power different circuits.
- A hydraulic schematic showing the layout of components in the hydraulic system.
- Images and descriptions locating hydraulic components on the front of the machine.
New holland cr9080 combine harvesters service repair manualjjdfjkkskmmed
This service manual provides information for servicing and repairing CNH Industrial CR and CX series combines. It includes technical specifications, diagrams, troubleshooting guides, and procedures for repairing and replacing components. The manual is divided into sections covering the engine, transmission, axles, hydraulics, electrical systems, attachments, and other major systems on the combines. Instructions are provided for maintenance, diagnosing issues, and repairing or replacing parts.
New holland c227 tier 4 b (final) compact track loader service repair manual ...jjdfjkkskmmed
This document provides service information for New Holland compact track loaders and skid steer loaders, including:
- Procedures for draining engine oil either through a remote drain hose or a quick-disconnect fitting.
- Safety warnings for lifting heavy components, handling hot fluids, and avoiding skin contact with engine oil.
- Illustrations and part numbers for access covers, drain plugs, caps, and fittings involved in the oil drain process.
New holland b110 c four wheel drive (4wd) tier 4b (final) tractor loader back...jjdfjkkskmmed
This document provides service information for New Holland B95C, B95C LR, B95C TC, and B110C tractor loader backhoes, including specifications for the Tier 4B compliant engines. The engines are 4-cylinder, turbocharged diesel engines with direct fuel injection. Engine details and specifications are provided for the B95C and B110C models. The document contains sections covering the engine systems, transmission, axles, brakes, hydraulics, frames, steering, wheels, cab climate control, electrical systems, attachments, and safety information.
The document provides instructions for removing and installing components of a Caterpillar 527 track skidder, including:
- Removing the grapple crosshead by removing a bolt/retainer and separating the crossblock.
- Removing an arch cylinder by disconnecting hoses, removing retaining pins and bolts, and lifting the cylinder off.
- Disassembling the arch cylinder by removing seals, bearings, and other components.
- Reassembling the arch cylinder by replacing any worn parts and reinstalling components in reverse order.
- Removing an arch by disconnecting hoses, removing retaining pins and bolts, and lifting the arch off after supporting it.
This document provides removal and installation instructions for removing and installing a radiator on a Caterpillar 527 Track Skidder. It describes removing guards, disconnecting hoses, removing bolts, and lifting out the radiator using lifting tools. The installation procedure reverses these steps, ensuring all connections are secure. Safety notices are provided regarding containing fluids, preventing contamination, and handling refrigerant. Removal and installation of the fan and fan drive are also described.
1. The document provides instructions for removing and installing various components of the 518 Series II Wheel Skidder powered by a 3304 engine, including tires and rims, wheels and wheel spindles, axles, front wheel brakes, and final drives.
2. The procedures include removing nuts and bolts, draining fluids, using specialty tools to press components out or install seals, and specifying torque specifications for reinstallation.
3. Technicians are advised to inspect seals for damage and replace as needed, apply anti-seize compound, and bleed brake lines after reinstallation of brakes.
This document provides instructions for removing and installing the fuel injection pump housing and governor from a Caterpillar 3304B engine. It outlines the required tools and gives step-by-step procedures with illustrations. The procedures include removing the housing, disassembling it to access internal components like bearings and camshaft, cleaning all parts, assembling the housing with new or original parts as needed, and installing the reassembled housing back onto the engine. Precautions are given to keep all parts clean and apply oil before assembly.
The document provides instructions for removing and installing an axle housing and flange on a 434F2 backhoe loader. The removal process involves removing bolts, nuts, plates, rings and shafts using various tools. Individual components like bearings, seals and bushings are then removed from the housing and flange. The assembly process reverses the removal steps, applying grease and torquing bolts to the specified values.
Caterpillar cat 434 f backhoe loader (prefix mtr) service repair manual (mtr0...jjdfjkkskmmed
This document provides instructions for removing and installing inlet and exhaust valves on a Caterpillar C4.4 engine. It outlines the required tools and parts, safety considerations, and step-by-step procedures. The removal process involves using a valve spring compressor tool to decompress the springs and remove the keepers and springs. The installation process reverses this, compressing the springs to insert the keepers. Proper cleaning and inspection of parts is emphasized to prevent premature wear.
The document provides instructions for disassembling an axle housing on a 432F2 backhoe loader. It lists required tools and gives 26 steps to remove components such as brake discs, pistons, cylinders, gears, seals, and bearings. The overall goal is to disassemble the service brakes, differential, and bevel gear.
Caterpillar cat 428 c backhoe loader (prefix 8rn) service repair manual (8rn0...jjdfjkkskmmed
This document provides instructions for removing and installing fuel injection nozzles and inlet/exhaust valves on a Caterpillar 3054 engine. It describes removing the fuel lines before removing the nozzles, cleaning parts, installing new seat washers, and tightening the nozzle nut to the specified torque. For valves, it instructs cleaning the cylinder head, using a tool to compress the springs, removing keepers and springs, and installing in reverse order.
Caterpillar cat 428 c backhoe loader (prefix 2cr) service repair manual (2cr0...jjdfjkkskmmed
This document provides instructions for removing and installing fuel injection nozzles and fuel injection pumps on a Caterpillar 3054 engine. The instructions include removing fuel lines, loosening nuts, removing nozzles and pumps, cleaning parts, and installing nozzles and pumps following specific tightening procedures and torque specifications. Safety notices are also provided to keep parts clean and contain fluids properly during the repair process.
Caterpillar cat 420 d backhoe loader (prefix fdp) service repair manual (fdp0...jjdfjkkskmmed
This document provides instructions for removing and installing the front housing on a Caterpillar 3054C engine. The removal procedure involves removing several other components first, like the alternator and crankshaft pulley. To remove the front housing, bolts connecting it to the cylinder block and fuel injection pump must be removed. Installation involves cleaning surfaces, installing gaskets and seals, and torquing bolts to specified values. Proper alignment of the front housing and cylinder block is important during installation.
Caterpillar cat 420 d backhoe loader (prefix fdp) service repair manual (fdp0...jjdfjkkskmmed
This document provides instructions for disassembling and assembling the final drive, drive and steering axle housing, and related components of a 420D backhoe loader. The disassembly process involves removing components like planetary gears, bearings, seals, and snap rings from the final drive and hub. The assembly process provides detailed instructions and torque specifications for reinstalling these components in the reverse order. Tools needed are also listed. Safety precautions are noted such as using lifting devices to handle heavy components.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00977179
Pistons and Connecting Rods - Assemble
SMCS - 1225-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 7S-9470 Piston Ring Expander 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Clean the grooves of the used pistons with an acceptable tool or 1U-8811 Cleaner .
2. Install the connecting rod bearings. Ensure that the tabs on the back side of the connecting
rod bearings are in the tab grooves of the connecting rod and the connecting rod cap.
1/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00486509
3. Install connecting rod (2) into the piston. Ensure that bearing tab slot (3) and the
identification marks are on the same side as the "V" mark on the top of the piston.
4. Lubricate piston pin (1) with clean engine oil and install piston pin (1) through the piston
and connecting rod. Install retaining ring (4) on the end of the piston pin.
Illustration 2 g00484932
5. Install the oil control ring on the piston with Tool (A) .
Note: The spring ends of the oil control ring should be assembled 180 degrees from the ring
end gap. The blue colored portion of the spring must be visible at the ring end gap.
6. Use Tool (A) to install the intermediate piston ring with the side marked "UP-2" toward the
top of the piston.
7. Use Tool (A) to install the top piston ring with the side marked "UP-1" toward the top of the
piston.
Note: The gaps in the intermediate piston ring and the top piston ring should be separated
by 120 degrees.
End By: Install the pistons and connecting rods. Refer to Disassembly and Assembly, "Pistons
and Connecting Rods - Install".
2/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:38:43 UTC+0800 2019
3/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00976704
Pistons and Connecting Rods - Install
SMCS - 1225-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5P-3525 Piston Ring Compressor 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Rotate the crankshaft until the bearing journals are at the bottom center. The bearing
journals that are at the bottom center are for the piston installation.
2. Put clean engine oil on the crankshaft journals and on the inside of the cylinder liners. Put
clean engine oil on the piston rings and the connecting rod bearings.
3. Move the piston rings on the pistons until the ring openings are separated by approximately
120 degrees.
1/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 1 g00483337
4. Put the piston in the cylinder liner with the "V" mark on the piston in alignment with the
"V" mark on the cylinder block. Put tool (A) in position on the cylinder block and compress
the piston rings.
NOTICE
The "V" mark must be visible on the piston and the cylinder block. If
the "V" mark is not visible, the piston must be installed with the relief
for the valve positioned toward the pushrod opening in the cylinder
block. Damage may result if the pistons are not installed properly.
5. Push the piston into the cylinder liner and out of the ring compressor.
Illustration 2 g00483701
6. Guide connecting rod (1) into position on the crankshaft.
7. Put clean engine oil (SAE 30) on the lower half of the connecting rod bearing and on the
connecting rod bolts.
2/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. NOTICE
When the connecting rod caps are installed, ensure that the
identification marks are aligned.
8. Install connecting rod cap (2) and the nuts that secure the connecting rod cap. Torque both
of the nuts to 40 ± 4 N·m (30 ± 3 lb ft). Mark the position of the nuts. Tighten each nut for
an additional 90 degrees (1/4 turn).
9. Repeat Steps 1 through 8 for the remainder of the piston and connecting rods.
End By:
a. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
b. Install the engine oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
c. Install the spacer plate. Refer to Disassembly and Assembly, "Spacer Plate - Remove and
install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:39:42 UTC+0800 2019
3/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00987487
Connecting Rod Bearings - Remove
SMCS - 1219-011
Removal Procedure
Start By:
A. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
B. Remove the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g00487412
1. Turn the crankshaft until two of the pistons are at the bottom center. Remove connecting rod
nuts (1) from the connecting rod. Remove connecting rod cap (2) for each connecting rod.
Note: The connecting rod bolts can fall out of the connecting rods when the connecting rod
nuts are removed.
2. Remove the lower half of the connecting rod bearing from connecting rod cap (2) .
3. Carefully push the connecting rod into the cylinder liner for bearing removal. Remove the
upper half of the connecting rod bearing from the connecting rod.
4. Repeat Steps 1 through 3 for the remaining connecting rod bearings.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:40:42 UTC+0800 2019
2/2527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00987670
Connecting Rod Bearings - Install
SMCS - 1219-012
Installation Procedure
Table 1
Tool Part Number Part Description Qty
A - Plastigage -
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Install the connecting rod bearings dry when the clearance checks are made. Put clean
engine oil on the connecting rod bearings for final assembly.
1. Install the upper half of the connecting rod bearing in the connecting rod.
2. Install the lower half of the connecting rod bearing in the connecting rod.
Note: Align the tabs on the back of the connecting rod bearings with the tab grooves in the
connecting rod.
1/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 1 g00487493
3. In order to check the connecting rod bearing clearance, put Tool (A) on the connecting rod
bearing, as shown.
4. Put clean engine oil (SAE 30) on the connecting rod bolts.
NOTICE
When the connecting rod caps are installed, ensure that the
identification marks are aligned.
Illustration 2 g00487412
Note: Do not turn the crankshaft when Tool (A) is positioned.
5. Ensure that connecting rod (3) is in position on the crankshaft. Install connecting rod cap (2)
and connecting rod nuts (1) on connecting rod (3) .
2/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 3 g00287852
6. Tighten the connecting rod nuts to a torque of 40 ± 4 N·m (30 ± 3 lb ft). Mark the position
of the nuts. Tighten each nut for an additional 90 degrees (1/4 turn).
7. Remove the connecting rod cap. Measure Tool (A) on the bearing surface before Tool (A) is
removed. The clearance between the connecting rod bearing and a new crankshaft should be
0.076 to 0.168 mm (.0025 to .0066 inch). The clearance between the connecting rod bearing
and a used crankshaft should be 0.25 mm (0.01 inch).
8. Install connecting rod cap (2) and connecting rod nuts (1) on connecting rod (3). Repeat
Step 6 in order to tighten the nuts.
9. Repeat Steps 1 through 8 for the remaining connecting rod bearings.
End By:
a. Install the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
b. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:41:41 UTC+0800 2019
3/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i00990466
Crankshaft Main Bearings - Remove
SMCS - 1203-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-5518 Bearing Tool 1
Start By:
A. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
B. Remove the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g00479056
1. Remove No. 1, 3, 5 and 7 main bearing caps (3). Remove the lower halves of the main
bearings from the main bearing caps.
Note: If the crankshaft is turned in the wrong direction, the tab on the bearing will be
pushed between the crankshaft and the bearing area in the cylinder block. This can result in
damage to the cylinder block and/or the crankshaft.
2. Install Tool (A) in the oil hole in the crankshaft journal. Turn the crankshaft in order to
remove the upper halves of main bearings (1) .
3. Remove crankshaft thrust plates (2) from the crankshaft.
4. Install No. 1, 3, 5, and 7 main bearing caps (3). Refer to Disassembly and Assembly,
"Crankshaft Main Bearings - Install".
5. Remove the remaining main bearing caps (No. 2, 4 and 6) (3). Remove the lower halves of
the main bearings from the main bearing caps.
Note: If the crankshaft is turned in the wrong direction, the tab on the bearing will be
pushed between the crankshaft and the bearing area in the cylinder block. This can result in
damage to the cylinder block and/or the crankshaft.
6. Install Tool (A) in the hole in the crankshaft journal. Turn the crankshaft in order to remove
the upper halves of main bearings (1) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:42:40 UTC+0800 2019
2/2527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i03706647
Crankshaft Main Bearings - Install
SMCS - 1203-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 2P-5518 Bearing Tool 1
B - Plastigage -
C 8T-5096 Dial Indicator Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Install the main bearings dry when the clearance checks are made. Put clean engine oil on
the main bearings for final assembly.
Note: Ensure that the upper halves and the lower halves of the main bearings are installed so that
the bearing tabs fit into the notch in the cylinder block and in the main bearing caps.
1/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g00479169
Illustration 2 g00479171
1. Use Tooling (A) and install the new upper halves of main bearings (1) in the cylinder block.
Install new lower halves of main bearings (1) in main bearing caps (2) .
Note: When the bearing clearance is checked and the engine is in an upright position or on
the engine's side, the crankshaft must be supported against the upper halves of the main
bearings. This is done in order to get a correct measurement with Tooling (B) . If the
crankshaft is not supported, the weight of the crankshaft will cause an incorrect reading. If
the engine is not in an upright position or on the engine's side, it is not necessary to support
the crankshaft. Do not rotate the crankshaft when Tooling (B) is positioned.
Note: Refer to Guideline For Reusable Parts, SEBV0544, "Engine Bearings and
Crankshafts" for complete details concerning the measurement of bearing clearances.
2. Check the main bearing clearance with Tooling (B) , as follows:
a. Put a piece of Tooling (B) on the crankshaft journals, as shown.
Note: Make sure that the part number on the main bearing cap is facing toward the
front of the engine. Also, make sure that the number on the main bearing cap matches
the number on the cylinder block on the left side of each main bearing cap.
2/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. b. Put main bearing caps (2) in position in the engine. Put 4C-5593 Anti-Seize
Compound on the bolt threads and the face of the washers. Install the bolts and
tighten the bolts to torque of 40 ± 4 N·m (30 ± 3 lb ft).
c. Put a mark on each bolt and main bearing cap. Tighten the bolts for an additional 90
degrees (1/4 turn).
d. Remove the main bearing caps and measure Tooling (B) in order to find the bearing
clearance. The main bearing clearance for new bearings must be 0.076 to 0.165 mm
(0.0030 to 0.0065 inch). The maximum permissible clearance with used bearings is
0.25 mm (0.010 inch).
Illustration 3 g00479203
3. Put clean oil on thrust plate (4) and install a new thrust plate for the rear main bearing.
Install the new thrust plate so that the mark that is identified as the "BLOCK SIDE" faces
toward the cylinder block and toward the tabs on the thrust plates in the machined area on
the cylinder block. Tabs (3) on thrust plate (4) will not allow the thrust plate to be installed
backward.
Illustration 4 g00479205
3/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 4. Install main bearing caps (2) . Use the same procedure that is described in Step 2.b and Step
2.c.
5. Remove the remainder of the main bearing caps. Perform Steps 1, 2 and 4 again.
Illustration 5 g00479212
6. Use Tooling (C) in order to check the crankshaft end play. The end play is controlled by the
thrust plates on the rear main bearing. End play with new bearings must be 0.122 to 0.579
mm (0.0048 to 0.0228 inch).
End By:
a. Install the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
remove and install".
b. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:43:40 UTC+0800 2019
4/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i01112752
Crankshaft - Remove
SMCS - 1202-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B
8B-7551 Bearing Puller 1
8B-7549 Puller Leg 2
3H-0465 Push-Puller Plate 4
1B-4207 Full Nut 2
8B-7560 Step Plate 1
1P-0820 Hydraulic Puller 1
9U-6600 Hand Hydraulic Pump 1
Start By:
A. Remove the front housing. Refer to Disassembly and Assembly, "Front Housing - Remove".
B. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
C. Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Remove".
D. Remove the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
1/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00503163
1. Turn the crankshaft until timing mark "C" on crankshaft gear (1) is aligned with timing
mark "C" on camshaft gear (2) .
Illustration 2 g00503180
2. Remove connecting rod nuts (4) and connecting rod caps (3) from the connecting rods.
NOTICE
2/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Damage may occur to the fuel injection nozzle or the piston if the
piston and connecting rod are pushed too far down in the cylinder
liners.
Note: The piston will be difficult to push down into the cylinder when the inlet valves and
exhaust valves are closed.
3. Push down on the pistons that are not at the top center position in order to clear the
crankshaft.
4. Remove main bearing cap bolts (5) and main bearing caps (6) from the cylinder block.
Illustration 3 g00503320
5. Remove thrust plates (7) from the rear main bearing.
Illustration 4 g00503353
6. Install Tool (A) and a suitable lifting device on crankshaft (8), as shown. Lift the crankshaft
straight up from the cylinder block. The weight of the 3304B crankshaft is 65 kg (143 lb).
The weight of the 3306B crankshaft is 95 Kg (210 lb).
3/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 5 g00503384
7. Use Tool (B) in order to remove the crankshaft gear and the oil seal wear sleeve from the
crankshaft.
Note: Put identification marks on the bearings and on the bearing caps prior to removal.
8. Remove the main bearings from the main bearing caps and from the cylinder block.
Remove the connecting rod bearings from the connecting rods and from the connecting rod
caps.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:44:39 UTC+0800 2019
4/4527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i03706543
Crankshaft - Install
SMCS - 1202-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B - Plastigage -
C 8T-5096 Dial Indicator Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Install the main bearings dry when the clearance checks are made. Put clean engine oil on
the main bearings for final assembly.
Note: Ensure that the upper halves and the lower halves of the main bearings are installed so that
the bearing tabs fit into the bearing tab grooves in the cylinder block and in the main bearing caps.
1/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 1 g00503582
1. If the bearings were removed from the engine, clean the bearing surfaces in the cylinder
block and the main bearing caps. Install the upper halves of connecting rod bearings (1) and
main bearings (2) .
Illustration 2 g00503642
Hot oil and hot components can cause personal injury. Do not allow hot
oil or hot components to contact the skin.
2. Heat crankshaft gear (3) to a maximum temperature of 315 °C (600 °F). Install crankshaft
gear (3) on the crankshaft.
2/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 3 g00503668
3. Install Tooling (A) on the ends of the crankshaft and use a hoist to lower the crankshaft into
position above the cylinder block. Align the connecting rods with the crankshaft. Align the
"C" mark on crankshaft gear (3) with the "C" mark on camshaft gear (4) . Lower the
crankshaft into position in the cylinder block.
Note: When the bearing clearance is checked and the engine is in an upright position or on
the engine's side, the crankshaft must be supported against the upper halves of the main
bearings. This is done in order to get a correct measurement with Tooling (B) . If the
crankshaft is not supported, the weight of the crankshaft will cause an incorrect reading. If
the engine is not in an upright position or on the engine's side, it is not necessary to support
the crankshaft. Do not rotate the crankshaft when Tooling (B) is positioned.
Note: Refer to Guideline For Reusable Parts, SEBV0544, "Engine Bearings and
Crankshafts" for complete details concerning the measurement of bearing clearances.
Illustration 4 g00503884
4. Check the main bearing clearance with Tooling (B) , as follows:
a. Put a piece of Tooling (B) on the crankshaft journal, as shown.
Note: Make sure that the part number on the main bearing cap is facing toward the
front of the engine. Also, make sure that the number on the main bearing cap matches
the number on the cylinder block on the left side of each main bearing cap.
3/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. b. Put the main bearing caps in position in the engine. Put 4C-5593 Anti-Seize
Compound on the bolt threads and the face of the washers. Install the bolts and
tighten the bolts to a torque of 40 ± 4 N·m (30 ± 3 lb ft).
c. Put a mark on each bolt and main bearing cap. Tighten the bolts for an additional 90
degrees (1/4 turn).
d. Remove the main bearing caps and measure Tooling (B) in order to find the bearing
clearance. The main bearing clearance for new bearings must be 0.076 to 0.165 mm
(0.0030 to 0.0065 inch). The maximum permissible clearance with used bearings is
0.25 mm (0.010 inch).
Illustration 5 g00503913
5. Put clean engine oil on thrust plate (7) for the rear main bearing. Install the new thrust plate
so that the mark that is identified as the "BLOCK SIDE" faces toward the cylinder block
and toward the tabs on the thrust plates in the machined area on the cylinder block. Tabs (6)
will not allow thrust plate (7) to be installed backward.
Illustration 6 g00504005
6. Install the remaining main bearing caps. Use the same procedure that is described in Step
4.b and Step 4.c.
4/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 7 g00504013
7. Check the crankshaft end play with Tooling (C) . The end play is controlled by the thrust
plates on the rear main bearing. End play with new thrust plates must be 0.122 to 0.579 mm
(0.0048 to 0.0228 inch).
Illustration 8 g00504198
8. Pull the connecting rod into position against the crankshaft.
Note: Install the connecting rod bearings dry when the clearance checks are made. Put clean
engine oil on the connecting rod bearings for final assembly.
9. Install the lower half of rod bearing (8) in the connecting rod cap. Align the tab in the
connecting rod bearing with the tab in the connecting rod cap.
10. In order to check the connecting rod bearing clearance, put Tooling (B) in position on the
crankshaft, as shown.
NOTICE
5/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. When the connecting rod caps are installed, ensure that the
identification marks are aligned.
Illustration 9 g00504276
11. Make sure that the connecting rod is in position on the crankshaft. Install connecting rod cap
(9) and the connecting rod nuts.
12. Tighten the connecting rod nuts to a torque of 40 ± 4 N·m (30 ± 3 lb ft). Mark the position
of the connecting rod nuts. Tighten each nut for an additional 90 degrees (1/4 turn).
13. Remove connecting rod cap (9) and measure the thickness of the Plastigage on the
crankshaft. The connecting rod clearance must be 0.076 to 0.168 mm (0.0030 to 0.0066) for
new bearings. The maximum clearance for used connecting rod bearings should be 0.25 mm
(0.010 inch).
14. Install connecting rod cap (9) and tighten the nuts. Refer to Step 12 for the tightening
procedure.
15. Repeat Steps 8 through 14 for the remaining connecting rod bearings.
End By:
a. Install the oil pan plate. Refer to Disassembly and Assembly, "Engine Oil Pan Plate -
Remove and Install".
b. Install the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump -
Install".
c. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
d. Install the front housing. Refer to Disassembly and Assembly, "Front Housing - Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:45:38 UTC+0800 2019
6/6527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Shutdown SIS
Previous Screen
Product: TRACK SKIDDER
Model: 527 TRACK SKIDDER 3DS
Configuration: 527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 Engine
Disassembly and Assembly
3304B and 3306B Engines for Caterpillar Built Machines
Media Number -SENR5598-09 Publication Date -01/01/2013 Date Updated -25/01/2013
i05977048
Bearing Clearance - Check
SMCS - 1203-535; 1219-535
Measurement Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
198-9142
Plastic Gauge (Green)
0.025 to 0.076 mm
(0.001 to 0.003 inch)
1
198-9143
Plastic Gauge (Red)
0.051 to 0.152 mm
(0.002 to 0.006 inch)
1
198-9144
Plastic Gauge (Blue)
0.102 to 0.229 mm
(0.004 to 0.009 inch)
1
198-9145
Plastic Gauge (Yellow)
0.230 to 0.510 mm
(0.009 to 0.020 inch)
1
Note: Plastic gauge may not be necessary when the engine is in the chassis.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
31. Note: Cat does not recommend the checking of the actual bearing clearances particularly on small
engines. This is because of the possibility of obtaining inaccurate results and the possibility of
damaging the bearing or the journal surfaces. Each Cat engine bearing is quality checked for
specific wall thickness.
Note: The measurements should be within specifications and the correct bearings should be used.
If the crankshaft journals and the bores for the block and the rods were measured during
disassembly, no further checks are necessary. However, if the technician still wants to measure the
bearing clearances, Tooling (A) is an acceptable method. Tooling (A) is less accurate on journals
with small diameters if clearances are less than 0.10 mm (0.004 inch).
NOTICE
Lead wire, shim stock or a dial bore gauge can damage the bearing
surfaces.
The technician must be very careful to use Tooling (A) correctly. The following points must be
remembered:
• Ensure that the backs of the bearings and the bores are clean and dry.
• Ensure that the bearing locking tabs are properly seated in the tab grooves.
• The crankshaft must be free of oil at the contact points of Tooling (A).
1. Put a piece of Tooling (A) on the crown of the bearing that is in the cap.
Note: Do not allow Tooling (A) to extend over the edge of the bearing.
2. Use the correct torque-turn specifications in order to install the bearing cap. Do not use an
impact wrench. Be careful not to dislodge the bearing when the cap is installed.
Note: Do not turn the crankshaft when Tooling (A) is installed.
3. Carefully remove the cap, but do not remove Tooling (A). Measure the width of Tooling
(A) while Tooling (A) is in the bearing cap or on the crankshaft journal. Refer to Illustration
1.
2/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
32. Illustration 1 g01152855
Typical Example
4. Remove all of Tooling (A) before you install the bearing cap.
Note: When Tooling (A) is used, the readings can sometimes be unclear. For example, all
parts of Tooling (A) are not the same width. Measure the major width in order to ensure that
the parts are within the specification range. Refer to Specifications Manual, "Connecting
Rod Bearing Journal" and Specifications Manual, "Main Bearing Journal" for the correct
clearances.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Sep 21 00:46:37 UTC+0800 2019
3/3527 TRACK-TYPE SKIDDER 3DS00001-UP (MACHINE) POWERED BY 3304 En...
2019/9/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...