This document provides instructions for disassembling and assembling the travel motor on a 390F Hydraulic Excavator. The disassembly procedure involves 40 steps to remove components like the head, relief valves, spools, pistons, barrel assembly, and seals. The assembly procedure reverses the disassembly steps and provides notes on cleaning, applying oil, and ensuring parts are reinstalled in their original locations and orientations. Precautions are included to contain fluids, handle spring-loaded parts carefully, and wear protective equipment.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...jiaoyi82414369
This document provides instructions for disassembling and assembling the travel motor of a 390F hydraulic excavator. It outlines 40 steps for disassembly, removing components like the head, relief valves, spools, pistons, bearings and seals. It then outlines 36 steps for reassembly, installing these components in reverse order while noting alignment marks and applying lubricant. Precautions are provided for spring loaded components.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...yinranhe0814
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. It lists 40 steps for disassembly, including removing the head, relief valves, spools, pistons, port plate, springs, and other components. It also lists 12 steps for assembly, noting to clean all parts thoroughly, apply a light film of oil, and reinstall components in their original locations and orientations. Precautions are provided for parts under spring tension. Required tools are listed.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...aags15120808
This document provides instructions for disassembling and assembling the travel motor of a 390F hydraulic excavator. It outlines 40 steps for disassembly, removing components like the head, relief valves, spools, pistons, barrel assembly, swashplate and shaft. It then outlines 32 steps for reassembly, installing these components in reverse order while noting alignment marks and applying lubricant. Precautions are provided for spring loaded components.
This document provides instructions for disassembling and assembling the travel motor of a 390D Excavator. It lists 40 steps for disassembly, removing components like the head, relief valves, bearings, seals, and plates. It then lists 17 steps for assembly, reinstalling these components in the reverse order and ensuring proper alignment of parts. Precautions are provided to contain fluids, release spring forces carefully, and clean parts thoroughly.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing the head, relief valves, pistons, springs, seals, plates, and bearings. The 31 steps for assembly include installing these same components in reverse order and ensuring alignment marks match and components are reinstalled in their original locations. Tools and cleanliness are emphasized throughout the process.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure reverses this with 31 steps, applying oil and ensuring proper installation of alignment marks and springs. Precautions are provided regarding contained fluids, spring force, and cleanliness.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...jiaoyi82414369
This document provides instructions for disassembling and assembling the travel motor of a 390F hydraulic excavator. It outlines 40 steps for disassembly, removing components like the head, relief valves, spools, pistons, bearings and seals. It then outlines 36 steps for reassembly, installing these components in reverse order while noting alignment marks and applying lubricant. Precautions are provided for spring loaded components.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...yinranhe0814
This document provides instructions for disassembling and assembling the travel motor of a 390F Hydraulic Excavator. It lists 40 steps for disassembly, including removing the head, relief valves, spools, pistons, port plate, springs, and other components. It also lists 12 steps for assembly, noting to clean all parts thoroughly, apply a light film of oil, and reinstall components in their original locations and orientations. Precautions are provided for parts under spring tension. Required tools are listed.
Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair M...aags15120808
This document provides instructions for disassembling and assembling the travel motor of a 390F hydraulic excavator. It outlines 40 steps for disassembly, removing components like the head, relief valves, spools, pistons, barrel assembly, swashplate and shaft. It then outlines 32 steps for reassembly, installing these components in reverse order while noting alignment marks and applying lubricant. Precautions are provided for spring loaded components.
This document provides instructions for disassembling and assembling the travel motor of a 390D Excavator. It lists 40 steps for disassembly, removing components like the head, relief valves, bearings, seals, and plates. It then lists 17 steps for assembly, reinstalling these components in the reverse order and ensuring proper alignment of parts. Precautions are provided to contain fluids, release spring forces carefully, and clean parts thoroughly.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing the head, relief valves, pistons, springs, seals, plates, and bearings. The 31 steps for assembly include installing these same components in reverse order and ensuring alignment marks match and components are reinstalled in their original locations. Tools and cleanliness are emphasized throughout the process.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure reverses this with 31 steps, applying oil and ensuring proper installation of alignment marks and springs. Precautions are provided regarding contained fluids, spring force, and cleanliness.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...ifkkdmdmdm
This document provides disassembly and assembly instructions for the travel motor of a 390D excavator. It details 40 steps to disassemble the various components of the travel motor, including removing the head, relief valves, pistons, springs, seals, plates, and bearings. The 12-step assembly section instructs on cleaning parts and applying oil before reinstalling components like seals, bearings, plates, springs, and the shaft in the reverse order of disassembly. Precautions are provided around releasing spring pressure and striking from parts.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...fujskekfmsme
This document provides disassembly and assembly instructions for the travel motor on a 390D Excavator. It details 40 steps to disassemble the travel motor by removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. It then lists 13 steps for reassembling the travel motor, applying oil to components and ensuring cleanliness during assembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...fujskemdidk8u
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...tingrm81805
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...nkog14651119
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble precision components while containing fluids and avoiding injury from spring forces.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...fujjsekmdm3ed
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...f89siekkmdmm2w
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble the travel motor safely and properly for component inspection or replacement.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...f8uejkdkdmm3e
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and a driver group. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...shibi1322
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...fucheng89
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...8foskkdjdkdm3e
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble the travel motor safely and properly for component inspection or replacement.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...jiazhi27185
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...hdjsjndndnd
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...yin9niaojiao
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar cat 390 f l excavator (prefix hjd) service repair manual (hjd0000...fujskekfmsme
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and a driver group. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...jdjkskmikdkmd
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It instructs the technician to remove components like the motor head, relief valves, spools, pistons, plates, and seals. Tools required include link brackets, a slide hammer, threaded rods, pliers, and drivers. Safety notices warn of spring forces and contained fluids.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...paws21610697
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It instructs the technician to remove components like the motor head, relief valves, spools, pistons, plates, and seals. Tools required include link brackets, a slide hammer, threaded rods, pliers, and drivers. Safety notices warn of spring forces and contained fluids.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...uddksemd8ud
The document provides disassembly instructions for a travel motor on a 390F L excavator. It involves 40 steps to disassemble the various components of the travel motor, including removing the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required and care must be taken to avoid injury from parts under spring pressure.
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians performing maintenance and repairs. Safety messages throughout warn of hazards involving high pressure fluids, battery explosions, fire risks, and preventing acid burns or injuries.
More Related Content
Similar to Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair Manual Instant Download.pdf
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...ifkkdmdmdm
This document provides disassembly and assembly instructions for the travel motor of a 390D excavator. It details 40 steps to disassemble the various components of the travel motor, including removing the head, relief valves, pistons, springs, seals, plates, and bearings. The 12-step assembly section instructs on cleaning parts and applying oil before reinstalling components like seals, bearings, plates, springs, and the shaft in the reverse order of disassembly. Precautions are provided around releasing spring pressure and striking from parts.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
This document provides the disassembly and assembly procedures for a 390D excavator travel motor. It involves 40 steps to disassemble the travel motor including removing plates, seals, springs, pistons, and bearings. The assembly procedure is also outlined in 17 steps and notes that cleanliness is important and parts should be lubricated before assembly. Precise alignment of parts is necessary, and some like the barrel assembly must remain intact during removal and installation.
Caterpillar cat 390 d excavator (prefix byp) service repair manual (byp00001 ...fujskekfmsme
This document provides disassembly and assembly instructions for the travel motor on a 390D Excavator. It details 40 steps to disassemble the travel motor by removing components like the head, relief valves, pistons, springs, seals, plates, and bearings. It then lists 13 steps for reassembling the travel motor, applying oil to components and ensuring cleanliness during assembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...fujskemdidk8u
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...tingrm81805
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...nkog14651119
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble precision components while containing fluids and avoiding injury from spring forces.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...fujjsekmdm3ed
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...f89siekkmdmm2w
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble the travel motor safely and properly for component inspection or replacement.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...f8uejkdkdmm3e
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and a driver group. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...shibi1322
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...fucheng89
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...8foskkdjdkdm3e
The document provides disassembly instructions for a travel motor in 40 steps. It instructs the technician to remove components like the head, relief valves, spools, pistons, springs, seals, bearings, and housing plates. Precise alignment marks and special tools are required to disassemble the travel motor safely and properly for component inspection or replacement.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...jiazhi27185
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual (HSM00001...hdjsjndndnd
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and drivers. Safety notices are provided regarding contained fluids, spring force, and being struck by parts.
Caterpillar Cat 390F L Excavator (Prefix HSM) Service Repair Manual Instant D...yin9niaojiao
This document provides instructions to disassemble a 390F L excavator travel motor. It lists 40 steps to remove components like the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required to remove parts and release spring forces. Components must be kept in order and reinstalled in their original locations and orientations.
Caterpillar cat 390 f l excavator (prefix hjd) service repair manual (hjd0000...fujskekfmsme
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It details removing components such as the motor head, relief valves, pistons, springs, seals, plates, and bearings. Tools required include link brackets, a slide hammer puller, threaded rods, pliers, and a driver group. Safety notices are provided to contain fluids and brace against spring forces during disassembly.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...jdjkskmikdkmd
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It instructs the technician to remove components like the motor head, relief valves, spools, pistons, plates, and seals. Tools required include link brackets, a slide hammer, threaded rods, pliers, and drivers. Safety notices warn of spring forces and contained fluids.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...paws21610697
The document provides disassembly instructions for a 390F L excavator travel motor in 40 steps. It instructs the technician to remove components like the motor head, relief valves, spools, pistons, plates, and seals. Tools required include link brackets, a slide hammer, threaded rods, pliers, and drivers. Safety notices warn of spring forces and contained fluids.
Caterpillar Cat 390F L Excavator (Prefix HJD) Service Repair Manual (HJD00001...uddksemd8ud
The document provides disassembly instructions for a travel motor on a 390F L excavator. It involves 40 steps to disassemble the various components of the travel motor, including removing the head, relief valves, pistons, springs, seals, plates, and shaft. Precision tools are required and care must be taken to avoid injury from parts under spring pressure.
Similar to Caterpillar Cat 390F Mobile Hydraulic Excavator (Prefix B37) Service Repair Manual Instant Download.pdf (20)
JOHN DEERE 430 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 332 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians performing maintenance and repairs. Safety messages throughout warn of hazards involving high pressure fluids, battery explosions, fire risks, and preventing acid burns or injuries.
JOHN DEERE 330 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
JOHN DEERE 322 LAWN GARDEN TRACTOR Service Repair Manual Instant Download (TM...jiuliu14811471
The document provides service information for John Deere 322, 330, 332, and 430 lawn and garden tractors, including safety guidelines, specifications, repair specifications and torque values, fuel and lubricant recommendations, and diagnostic and testing procedures. It is intended as a technical manual for experienced technicians to service these tractor models. The manual contents are organized into sections covering general information, engine repair, electrical systems, power train, steering/brakes, hydraulics, and diagnostics.
John Deere 261 and 272 Rear-Mounted Mowers Service Repair Manual Instant Down...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 74 and 84 Blades Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D, 62D AND 72D OnRamp Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54D, 60D and 72 Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information and specifications for John Deere commercial and consumer equipment, including several mower, tiller, broom, and snowblower models. The manual is organized systematically to keep all information for a particular system together. Safety is the first section and introduces safety symbols and guidelines to follow when operating the equipment.
John Deere 54, 60 and 72-Inch Mid Mount Mowers Service Repair Manual Instant ...jiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 47 and 59 Snowbowers Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 31B Post Hole Digger Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 26 and 51-Inch Brooms Service Repair Manual Instant Download.pdfjiuliu14811471
This technical manual provides information for experienced technicians on John Deere commercial and consumer equipment, including specifications, safety information, and diagrams. It is organized systematically to keep all information for a particular system together. The manual is intended as a reference for technicians to service and maintain the listed equipment properly.
John Deere 5E 2BV Blower Service Repair Manual Instant Download (TM1430).pdfjiuliu14811471
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
The document provides instructions for disassembling a cylinder head from a D11N track-type tractor. The procedures include removing inlet and exhaust valves, bridge dowels, valve seat inserts, valve guides, and valve lifters. Tools required are listed for each step. Safety notices emphasize keeping parts clean and wearing protective equipment when compressing valve springs.
The document is a service manual that provides instructions for removing and installing the high-low transmission on a D8L track-type tractor. It details over 50 steps to disassemble the transmission down to individual components and then reassemble. These include draining fluids, removing mounting hardware, disconnecting wiring and hoses, using specialty tools to separate interconnected pieces, cleaning and inspecting parts, and precisely reinstalling components in the reverse order.
The document provides instructions for removing and installing the bulldozer blade on a D6R Track-Type Tractor. The key steps include:
1. Disconnecting hydraulic hoses from the manifold and capping the connections.
2. Removing bolts, caps, and shims from the lift cylinders and stabilizer link.
3. Installing tooling under the push arms and using it to support the bulldozer blade.
4. Removing mounting bolts to detach the bulldozer blade from the tractor frame.
Caterpillar Cat D4HTSK III TRACK SKIDDER (Prefix 7PK) Service Repair Manual I...jiuliu14811471
This document provides instructions for removing and installing the cylinder head assembly on a Caterpillar 3304 engine. The steps include draining coolant, removing exhaust manifolds, valve covers, belts, hoses, wires and other components. The cylinder head bolts are then removed to lift off the head. Reinstallation follows the reverse order, applying thread lubricant and torquing bolts to the specified values. Valve clearance is adjusted at the end.
The document provides instructions for removing and installing an exhaust manifold and inlet/exhaust valves on a 3054E industrial engine. It includes removal and installation procedures with required tools and safety notices. The procedures describe removing/installing the exhaust manifold gasket, setscrews, and turbocharger. For valves, it describes removing/installing the valve springs, retainers, keepers, and stem seals while ensuring the piston is at top dead center.
This document provides installation instructions for a fuel injection pump on a 3054C industrial engine. It consists of 14 steps: 1) Ensure the engine is at top dead center, 2) Install an O-ring on the pump, 3) Position and bolt the pump to the housing, 4) Install a bracket, 5) Install the pump gear and tighten, 6) Connect wiring, 7) Connect fuel lines, 8) Adjust a spacer and bolt, 9) Tighten the gear nut, 10) Remove timing tools, 11) Install covers and pulleys, 12) Install fuel lines. The instructions include illustrations and torque specifications for each step.
1. The document provides instructions for assembling and disassembling the piston pump on a 994H Wheel Loader. It describes the required tools and gives step-by-step instructions with accompanying illustrations.
2. The assembly procedure involves installing bearings, seals, springs, pistons, and other components in the proper order. Precise measurements are taken to ensure correct lift-off limitations.
3. The disassembly and installation procedures are described for removing and installing the high pressure screen and piston pump. Hoses and fittings are disconnected and reconnected.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
2. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 390F MOBILE HYD POWER UNIT B37
Configuration: 390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
390F Excavator Machine Systems
Media Number -UENR0165-05 Publication Date -01/01/2018 Date Updated -24/01/2018
i05680270
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 1P-0074 Slide Hammer Puller Gp 1
C 123-4370 Threaded Rod M20 - 2.5 2
D 1P-1864 Pliers 1
E 1P-1858 Pliers 1
F 1P-0520 Driver Group 1
G 8T-0349 Bolt 2
Start By:
a. Remove the travel motor.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior
of the components should be thoroughly cleaned. This will help to prevent dirt from entering the
internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform
disassembly procedures on a clean work surface. Keep components covered and protected at all
times.
1. Place an alignment mark across all housings of the travel motor for assembly purposes.
Illustration 1 g01282832
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
2. Remove two socket head bolts (2) from head (1) that are 180 degrees from each other.
Replace these two bolts with Tooling (G). Tooling (G) will retain the brake cover when the
remaining socket head bolts (2) are removed.
3. Carefully remove the remaining socket head bolts (2) that retain head (1) in position.
Remove socket head bolts (2) evenly, in a crisscross pattern.
4. Remove Tooling (G) from head (1).
2/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g01283040
5. Install Tooling (A) and a suitable lifting device to head (1).
6. Remove head (1) from the travel motor. The weight of head (1) is approximately 68 kg
(150 lb).
Illustration 3 g01283045
7. Remove relief valve (3).
Illustration 4 g01283049
3/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
8. Remove cap (4) from body (9). Remove piston (5), spring (6), spool (7), and spring (8) from
body (9).
9. Remove O-ring seals (10), (12), and (14). Remove backup rings (11) and (13).
10. Remove the other relief valve from the other side of the head.
11. Repeat Steps 8 and 9 for the disassembly of the other relief valve.
Illustration 5 g01283057
12. Remove plug (15).
Illustration 6 g01283060
4/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 13. Remove spool (16).
Illustration 7 g01283070
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove plug (17).
Illustration 8 g01283075
15. Remove spool (21) from the head. Remove O-ring seal (22) from plug (17).
16. Remove plug (18) from the other side of the head. Remove spring (20). Remove O-ring seal
(19) from plug (18).
5/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 9 g01283083
17. Remove cap (23) and pressure reducing valve (24).
Illustration 10 g01283088
18. Remove O-ring seals (25), (26), and (27) from pressure reducing valve (24).
Illustration 11 g01283096
19. Use Tooling (B) in order to remove bearing (28) from the head.
6/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g01283101
20. Remove port plate (29) from the travel motor.
Note: Note the location of springs (30) before removal.
21. Remove springs (30) from the travel motor.
22. Remove O-ring seals (31).
Illustration 13 g01283110
23. Place alignment marks on piston (32) and the housing. The dowel hole in piston (32) must
be reinstalled to the original location.
7/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 14 g01283120
24. Install Tooling (C) to the threaded holes in piston (32). Install Tooling (A) and a suitable
lifting device on Tooling (C), as shown. Remove piston (32) from the travel motor.
Illustration 15 g01283129
25. Remove O-ring seals (33) and (34) from the travel motor.
Illustration 16 g01283133
26. Remove separator plates (35) and friction plates (36) from the travel motor.
Illustration 17 g01283138
8/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 18 g01283139
Note: Barrel assembly (37), piston assemblies (39), and retainer (40) must remain intact
during removal.
27. Position the travel motor sideways. Carefully remove barrel assembly (37) from shaft (38).
Illustration 19 g01283155
28. Place identification marks on piston assemblies (39), retainer (40), and barrel assembly (37).
These components must be reinstalled in the original location.
29. Remove retainer (40) and piston assemblies (39) from barrel assembly (37).
9/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 20 g01283175
Illustration 21 g01283193
30. Remove guide (41).
31. Remove springs (42).
Illustration 22 g01283187
32. Turn swashplate (43) counterclockwise in order to provide clearance for the removal of
swashplate (43).
33. Remove swashplate (43) from the travel motor housing.
10/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g01283195
34. Remove piston (44) and pivots (45).
Illustration 24 g01283206
35. Use Tooling (D) in order to remove retaining ring (46) from shaft (38).
Illustration 25 g01283209
36. Use a soft hammer in order to drive shaft (38) and bearing (47) from the motor housing.
11/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 26 g01283212
37. Use Tooling (E) in order to remove retaining ring (48) from bearing (47).
Illustration 27 g01283232
38. Use a suitable press in order to remove bearing (47) from shaft (38).
Illustration 28 g01283244
39. Remove retaining ring (49) and bearing race (50).
12/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 29 g01283253
40. Use Tooling (F) in order to remove lip seal (51) from the travel motor housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Dec 15 15:39:56 UTC+0800 2020
13/13
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 390F MOBILE HYD POWER UNIT B37
Configuration: 390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 Engine
Disassembly and Assembly
390F Excavator Machine Systems
Media Number -UENR0165-05 Publication Date -01/01/2018 Date Updated -24/01/2018
i02563228
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
D 1P-1864 Pliers 1
E 1P-1858 Pliers 1
F 1P-0520 Driver Group 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Note: Apply a light film of 10W oil to all components before assembly.
1/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g01283253
1. Use Tooling (F) in order to install lip seal (51) in the travel motor housing.
Illustration 2 g01283244
2. Install bearing (50) and retaining ring (49).
Illustration 3 g01283329
3. Raise the temperature of bearing (47). Install bearing (47) onto shaft (38).
2/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 4 g01283212
4. Use Tooling (E) in order to install retaining ring (48) onto bearing (47).
Illustration 5 g01283209
5. Install shaft (38) and bearing (47) into the motor housing.
Illustration 6 g01283206
6. Use Tooling (D) in order to install retaining ring (46) onto shaft (38).
3/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 7 g01283195
7. Install piston (44) and pivots (45).
Illustration 8 g01283187
8. Install swashplate (43).
Illustration 9 g01283193
4/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 10 g01283175
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
9. Install springs (42).
10. Install guide (41).
Illustration 11 g01283155
11. Install retainer (40) and piston assemblies (39) into barrel assembly (37). These components
must be reinstalled in the original location.
5/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 12 g01283139
Note: Barrel assembly (37), piston assemblies (39), and retainer (40) must remain intact
during installation onto shaft (38).
12. Position the travel motor sideways.
Illustration 13 g01283138
13. Carefully install barrel assembly (37) onto shaft (38).
Illustration 14 g01283133
14. Install separator plates (35) and friction plates (36) into the travel motor.
6/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 15 g01283129
15. Install O-ring seals (33) and (34) into the travel motor.
Illustration 16 g01283110
Note: Piston (32) must be reinstalled in the original location.
16. Install piston (32).
Illustration 17 g01283350
7/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Note: Note the location of springs (30) for installation.
17. Install springs (30) and O-ring seals (31) to the travel motor.
Illustration 18 g01283096
18. Lower the temperature of bearing (28). Install bearing (28) in the head.
Illustration 19 g01283088
19. Install O-ring seals (25), (26), and (27) on pressure reducing valve (24).
8/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 20 g01283083
20. Install pressure reducing valve (24). Tighten pressure reducing valve (24) to a torque of
44 ± 4 N·m (33 ± 3 lb ft).
21. Install cap (23).
Illustration 21 g01283075
22. Install O-ring seal (22) onto plug (17). Install spool (21) and plug (17) to the head.
23. Install O-ring seal (19) onto plug (18). Install spring (20) and plug (18) to the head.
24. Tighten plugs (17) and (18) to a torque of 74 ± 7 N·m (55 ± 5 lb ft).
9/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C18 ...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 22 g01283060
25. Install spool (16).
Illustration 23 g01283057
26. Install plug (15).
Illustration 24 g01283049
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install O-ring seals (10), (12), and (14) and backup rings (11) and (13).
28. Install piston (5), spring (6), spool (7), and spring (8) in body (9). Install cap (4) in body (9).
29. Repeat Steps 27 and 28 for the assembly of the other relief valve.
10/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
MORE MANUALS: https://www.ebooklibonline.com/
26. Illustration 25 g01283045
30. Install relief valves (3). Tighten relief valves (3) to a torque of 177 ± 18 N·m
(131 ± 13 lb ft).
Illustration 26 g01283396
31. Use light grease to install port plate (29) on the head.
11/12
390F Mobile Hydraulic Power Unit B3700001-UP (MACHINE) POWERED BY C...
2020/12/15
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...