The document provides instructions for disassembling and assembling various components of an excavator control valve, including:
1. Disassembling the proportional valve by removing bolts, nuts, and cartridge components.
2. Assembling the attachment, bucket, and boom control valve by installing O-rings, plugs, resolver valves, springs, and actuator groups.
3. Assembling the right travel, left travel, and stick control valve by installing spools, plugs, resolver valves, O-rings, and covers.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fios9dkksd
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, resolver valves, differential relief valves, plugs and O-rings. Tools required include pliers. Various components are tightened to specified torques. Safety warnings are provided to follow procedures carefully and wear protective equipment due to parts being spring loaded.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekmsemm
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, seals, plugs, resolver valves, differential relief valves, and covers. Special tools may be required and parts need to be checked for wear before assembly. Springs and other components must be assembled carefully according to the instructions to avoid injury. Torque specifications are provided for tightening certain parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fios9dkksd
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, seals, springs, pistons and brackets. Special tools may be required and parts must be installed in the proper order. Safety precautions are noted, including wearing protective equipment when handling spring-loaded parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are noted regarding spring-loaded parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fjjskekmsemm
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 336 d2 l excavator (prefix lah) service repair manual (lah000...fjekkdmmem
1) The document provides step-by-step instructions to disassemble a 336D2 L excavator travel motor. It details 27 steps to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more.
2) Various tools are required, including a transmission repair stand, lifting eye assembly, bolts, drivers, and other specialized tools. Safety precautions are noted throughout involving released spring forces.
3) Detailed illustrations accompany each step to show the component locations and orientations. Notes emphasize marking components for reinstallation and avoiding damage to mating surfaces.
Caterpillar cat 336 d2 l excavator (prefix lah) service repair manual (lah000...fjjskekdm
This document provides instructions to disassemble a 336D2L excavator travel motor. It describes 27 steps to remove components such as the motor head assembly, springs, relief valves, plugs, seals and port plates. Tools required include a transmission repair stand, lifting eye assembly, bolts, washers and drivers. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fios9dkksd
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, resolver valves, differential relief valves, plugs and O-rings. Tools required include pliers. Various components are tightened to specified torques. Safety warnings are provided to follow procedures carefully and wear protective equipment due to parts being spring loaded.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekmsemm
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, seals, plugs, resolver valves, differential relief valves, and covers. Special tools may be required and parts need to be checked for wear before assembly. Springs and other components must be assembled carefully according to the instructions to avoid injury. Torque specifications are provided for tightening certain parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fios9dkksd
The document provides assembly instructions for control valves on 385B and 385B L excavators. It involves 25 steps to assemble components like spools, seals, springs, pistons and brackets. Special tools may be required and parts must be installed in the proper order. Safety precautions are noted, including wearing protective equipment when handling spring-loaded parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are noted regarding spring-loaded parts.
Caterpillar cat 385 b excavator (prefix cls) service repair manual (cls00001 ...fjjskekmsemm
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 385 b l excavator (prefix cls) service repair manual (cls0000...fjjskekdmme
The document provides assembly instructions for control valves for attachment, bucket, boom, right travel, left travel, and stick functions on 385B and 385B L excavators. It involves installing seals, spools, resolver valves, solenoids, pistons, actuators, and covers. Proper torque values are specified and safety precautions are provided due to parts being under spring load.
Caterpillar cat 336 d2 l excavator (prefix lah) service repair manual (lah000...fjekkdmmem
1) The document provides step-by-step instructions to disassemble a 336D2 L excavator travel motor. It details 27 steps to remove components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more.
2) Various tools are required, including a transmission repair stand, lifting eye assembly, bolts, drivers, and other specialized tools. Safety precautions are noted throughout involving released spring forces.
3) Detailed illustrations accompany each step to show the component locations and orientations. Notes emphasize marking components for reinstallation and avoiding damage to mating surfaces.
Caterpillar cat 336 d2 l excavator (prefix lah) service repair manual (lah000...fjjskekdm
This document provides instructions to disassemble a 336D2L excavator travel motor. It describes 27 steps to remove components such as the motor head assembly, springs, relief valves, plugs, seals and port plates. Tools required include a transmission repair stand, lifting eye assembly, bolts, washers and drivers. Safety precautions are noted, such as wearing protective equipment when releasing spring forces.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01674415
Control Valve - Disassemble - Proportional Valve
SMCS - 5051-015
Disassembly Procedure
Illustration 1 g00864935
1. Remove bolts (1) and valve group (2).
1/2
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g00864942
2. Remove nut (3) and solenoid (4).
Illustration 3 g00864965
3. Remove bolt (5) and bracket assembly (6). Remove cartridge (7).
Illustration 4 g00864984
4. Remove O-ring seals (8) from cartridge (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 15:36:33 UTC+0800 2020
2/2
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01659183
Control Valve - Assemble - Attachment, Bucket, and Boom
SMCS - 5051-012
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
Illustration 1 g00854185
1. Install plugs and O-ring seals (80).
1/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00854173
2. Assemble resolver (71). Install ball (73) in valve (74). Install seat (72). Install backup rings
(76) and (79). Install O-ring seals (75), (77), and (78).
Note: Reduce the temperature of seat (72) before inserting the seat into the bore of valve
(74).
Illustration 3 g00854162
3. Install resolver (71). Tighten the resolver to a torque of 50 ± 10 N·m (37 ± 7 lb ft). Install
stems (68), (69), and (70). Install plugs and O-ring seals (67).
2/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 4 g00854153
4. Install O-ring seals (66). Install plug (65) and the O-ring seal.
Illustration 5 g00854149
5. Position cover (64) and install bolts (63).
Illustration 6 g00854122
6. Assemble resolver valve (57). Install backup rings (59) and (60). Install O-ring seals (58),
(61), and (62).
3/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 7 g00854098
7. Install plugs and O-ring seals (56). Install resolver valve (57). Tighten the resolver valve to
a torque of 50 ± 10 N·m (37 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
4/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g00854070
8. Install O-ring seal (51), spacers (52), spring (53), and valve (54) in body (55). Install plug
(50).
Illustration 9 g00854005
9. Install backup rings (45) and (48). Install O-ring seals (46), (47), and (49).
5/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g00853986
10. Install differential valve (44). Tighten the differential valve to a torque of 235 ± 10 N·m
(173 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 11 g00853964
11. Assemble all of the solenoid assemblies. Install springs (40), (41), and (42). Install retainer
(43).
6/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 12 g00853948
12. Use Tooling (A) to install retaining ring (39).
Illustration 13 g00853913
13. Install O-ring seals (37) and (38).
Illustration 14 g00853771
14. Install valve (33), spring (34), O-ring seal (35), and solenoid (36).
7/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 15 g00853770
15. Install bolts (32).
Illustration 16 g00853768
16. Install pistons (29). Install plugs and O-ring seals (30). Install O-ring seals (28) and (31).
Install spacer (19).
Illustration 17 g00853767
17. Use a hoist and a lifting sling to position actuator group (26) and install bolts (27). The
weight of the actuator group is approximately 28 kg (60 lb). Position bracket assembly (24)
and install bolts (25).
8/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 18 g00853766
18. Install spacer (19). Use a hoist and a lifting sling to position actuator group (23) and install
bolts (21). The weight of the actuator group is approximately 28 kg (60 lb). Position bracket
assembly (20) and install bolts (22).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 19 g00856084
9/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 19. Install backup rings (12) and (16). Install O-ring seals (13), (14), (15), (17), and (18).
Assemble line relief valves (10) and (11). Tighten nut (17A) to a torque of 80 ± 10 N·m
(59 ± 7 lb ft). Tighten nut (18A) to a torque of 33 ± 5 N·m (24 ± 4 lb ft).
Illustration 20 g00853764
20. Install line relief valve (11). Tighten the valves to a torque of 300 ± 40 N·m (220 ± 30 lb ft).
Illustration 21 g00853763
21. Install line relief valves (10). Tighten the valves to a torque of 300 ± 40 N·m
(220 ± 30 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 25 g00853759
25. Position cover (2) and install bolts (1).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Oct 16 15:37:30 UTC+0800 2020
12/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 385B EXCAVATOR RCD
Configuration: 385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine
Disassembly and Assembly
385B and 5090B Excavators Excavator Systems
Media Number -RENR5407-06 Publication Date -01/02/2016 Date Updated -12/02/2016
i01669933
Control Valve - Assemble - Right Travel, Left Travel, and
Stick
SMCS - 5051-012
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1862 Pliers 1
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the
components, if necessary.
Illustration 1 g00863333
1. Install plugs and O-ring seals (83).
1/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 2 g00862663
2. Install spools (80), (81), and (82). Install plugs and O-ring seals (79).
Illustration 3 g00862523
3. Assemble resolver valve (27). Install ball (74) in valve (27). Install seat (72). Install backup
rings (77) and (78). Install O-ring seals (73), (75), and (76).
Note: Reduce the temperature of seat (72) before inserting the seat into the bore of valve
(27).
2/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 4 g00862501
4. Assemble resolver valves (66). Install backup rings (70) and (71). Install O-ring seals (67),
(68), and (69).
Illustration 5 g00862404
5. Install resolver valves (66). Install plugs and O-ring seals (65).
Illustration 6 g00862399
6. Install O-ring seals (64). Install plug (63) and the O-ring seal.
3/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 7 g00862397
7. Position cover (62) and install bolts (61).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
4/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 8 g00862390
8. Assemble differential relief valves. Install O-ring seal (56), spacers (57), spring (58), and
valve (59) into body (60). Install plug (55).
Illustration 9 g00862383
9. Install backup rings (50) and (53). Install O-ring seals (51), (52), and (54).
5/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 10 g00862381
10. Install differential valve (49). Tighten the differential valve to a torque of 235 ± 10 N·m
(173 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 11 g00862378
11. Assemble all of the solenoid assemblies. Install springs (45), (46), and (47). Install retainer
(48).
6/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 12 g00862376
12. Use Tooling (A) to install retaining ring (44).
Illustration 13 g00862301
13. Install O-ring seals (42) and (43).
Illustration 14 g00862297
14. Install valve (38), spring (39), O-ring seal (40), and solenoid (41).
7/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 15 g00862287
15. Install bolts (37).
Illustration 16 g00862276
16. Install pistons (35). Install plugs and O-ring seals (36). Install O-ring seals (33) and (34).
Install spacer (32).
Illustration 17 g00862251
17. Install spacer (32). Use a hoist and a lifting sling to position actuator group (31) and install
bolts (30). The weight of the actuator group is approximately 28 kg (60 lb). Position bracket
assembly (29) and install bolts (28).
8/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Illustration 18 g00862206
18. Use a hoist and a lifting sling to position actuator group (26) and install bolts (25). The
weight of the actuator group is approximately 28 kg (60 lb). Position bracket assembly (24)
and install bolts (23). Install resolver (27). Tighten the resolver to a torque of 50 ± 10 N·m
(37 ± 7 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 19 g00863089
9/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEBP3...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 19. Install backup rings (17) and (20). Install O-ring seals (16), (18), (19), (21), and (22).
Assemble line relief valves (10) and (11). Tighten nut (21A) to a torque of 80 ± 10 N·m
(59 ± 7 lb ft). Tighten nut (22A) to a torque of 33 ± 5 N·m (24 ± 4 lb ft).
Illustration 20 g00862180
20. Install line relief valve (15). Tighten the valve to a torque of 300 ± 40 N·m (220 ± 30 lb ft).
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 21 g00862158
21. Assemble load check valves (5) and (6). Install boss (14) and spring (13) in valve (12).
10/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
Illustration 22 g00862129
22. Assemble flow compensator valve (7). Install spring (8), sleeve (9), and spring (10) in valve
(11).
Illustration 23 g00862111
23. Install load check valves (5) and (6) and flow compensator valve (7).
11/12
385B L Excavator RCD00001-UP (MACHINE) POWERED BY 3456 Engine(SEB...
2020/10/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...