This document provides instructions for disassembling and assembling components of a 374D L excavator travel motor and final drive system. The multi-step process includes removing 17 bolts and other hardware to disassemble the final drive cover and housing, exposing internal parts like pistons, seals, and gears. Proper tooling and safety precautions are emphasized to correctly handle springs, weights up to 817kg, and contained hydraulic fluids during disassembly and reassembly.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 374D L EXCAVATOR PAX
Configuration: 374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
374D Excavator Machine Systems
Media Number -KENR6406-01 Publication Date -01/02/2012 Date Updated -23/02/2012
i03768729
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 1
B 1P-1861 Retaining Ring Pliers As 1
C 6V-2055 Grease 1
D 128-5049 Guide Stud 2
Illustration 1 g02002733
1/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 1. Lubricate actuator piston (43) with hydraulic oil. Install actuator piston (43) into housing
(2). Install plug (42). Tighten plug (42) to a torque of 430 ± 40 N·m (315 ± 30 lb ft).
Illustration 2 g02002734
2. Install shaft seal (41). Use Tooling (B) in order to install retaining ring (44) .
Illustration 3 g02002735
2/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 4 g02002736
3. Use a suitable press to install bearing (39) onto shaft assembly (29). Bearing (39) must be
installed with retaining clip (X) toward the barrel assembly.
Illustration 5 g02001794
4. Install shaft assembly (29). Install the key and pin assemblies (38) .
Illustration 6 g02001793
5. Install swashplate (37) into motor housing (2) .
3/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 8. Wrap a piece of nylon string around the pistons (31), as shown. Install barrel assembly (27)
into the pump housing. Use the nylon string in order to hold the assembly together during
installation. Remove the nylon string.
Illustration 10 g02007094
Illustration 11 g02006998
9. Install the brake discs (28). Start with brake disc (Y). Alternate between brake discs (Y) and
brake discs (Z) with brake discs (Y) on the top and the bottom.
5/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 12 g02002313
10. Install O-ring seal (26) and backup ring (27) onto the brake piston (22). Install O-ring seal
(25) and backup ring (24) onto the brake piston (22).
Illustration 13 g02001773
11. Install O-ring seals (23) onto motor housing (2). Install springs (21) onto brake piston (22) .
Illustration 14 g02002474
12. Install balls (20), O-ring seals (19), backup rings (18), and retainers (17) into head (3) .
6/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g02002213
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
13. Install spring (13), spool (14), and adapter (15). Tighten adapter (15) to a torque of 115 ± 10
N·m (85 ± 7 lb ft). Install elbow (16) .
Illustration 16 g02002033
14. Install ball (9), spring (10), and orifice (11). Tighten orifice (11) to a torque of 7 ± 1 N·m
(62 ± 9 lb in). Install bearing (8). Install adapter (7) and elbow (6) .
7/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g02001974
15. Apply Tooling (C) to the back side of plate (5) in order to hold plate (5) in place during
assembly. Install plate (5) to head (3) .
Illustration 18 g02002738
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
8/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 19 g02001760
16. Install Tooling (D) to housing (2). Install head (3) onto motor housing (2). Use a suitable
lifting device to install head (3). The weight of the head (3) is approximately 40 kg (90 lb).
Remove Tooling (A) and Tooling (D). Install bolts (4). Tighten bolts (4) to a torque of 530
± 70 N·m (390 ± 50 lb ft).
Illustration 20 g02001733
17. Install O-ring seal (1) onto motor housing (2) .
End By: Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove &
Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Nov 4 00:56:03 UTC+0800 2020
9/9
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 374D L EXCAVATOR PAX
Configuration: 374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
374D Excavator Machine Systems
Media Number -KENR6406-01 Publication Date -01/02/2012 Date Updated -23/02/2012
i07285033
Final Drive - Remove and Install
SMCS - 4050-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
132-8223 Power Pack 1
132-8119 Hydraulic Torque Wrench Assembly 1
B - Loctite 243 -
Start By:
a. Remove the final drive sprocket.
b. Remove the travel motor.
Note: The final drive sprocket does not need to be removed prior to removal of the final drive.
The sprocket should be removed to disassemble the final drive.
Note: The travel motor does not need to be removed prior to removal of the final drive. The travel
motor should be removed to disassemble the final drive.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
1/3
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00595681
1. Attach a suitable lifting device to final drive (1). The weight of final drive (1) is
approximately 817 kg (1800 lb).
Illustration 2 g00874668
2/3
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 3 g00874687
Note: Mark the location of mounting bolt holes (Z) for the travel motor for installation
purposes.
2. Use Tooling (A) to remove bolts (2). Use the suitable lifting device to remove the final
drive.
Installation Procedure
1. Install final drive (1) in the reverse order of removal.
a. Apply Tooling (B) to bolts (2).
b. Tighten bolts (2) to a torque of 500 ± 50 N·m (369 ± 37 lb ft). Turn bolts (2) an
additional 50° ± 5°.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Nov 4 00:56:59 UTC+0800 2020
3/3
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 374D L EXCAVATOR PAX
Configuration: 374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine
Disassembly and Assembly
374D Excavator Machine Systems
Media Number -KENR6406-01 Publication Date -01/02/2012 Date Updated -23/02/2012
i02388153
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7575 Link Bracket 3
C 138-7576 Link Bracket 2
D
132-8119 Hydraulic Wrench 1
132-8223 Hydraulic Pump and Motor Gp 1
9U-7418 (1)
Hex Bit Socket 1
E 176-6536 Forcing Bolt 2
( 1 )
Cut the tool to length (X). Length (X) is equal to 14 mm (0.55 inch). Refer to Step 27 for the correct
modification.
Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
1. Thoroughly clean the outside of the final drive prior to disassembly.
1/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00865168
2. Fasten the final drive to Tooling (A). Put an alignment mark across the sections of the final
drive for assembly purposes. All parts must be reinstalled in the original locations. The
weight of the final drive is approximately 817 kg (1800 lb).
Illustration 2 g00865172
3. Remove socket head bolts (1) from the final drive cover.
Illustration 3 g01192344
2/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 4. Attach Tooling (C) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 66 kg (145 lb).
5. Remove bolts (3). Use a suitable hammer to break the seal between cover (2) and the ring
gear. Remove cover (2).
Illustration 4 g00865183
6. Remove spacer (4) and the shims from the cover.
7. Remove socket head bolts (5) and ring gear (6) from the cover.
Illustration 5 g00865487
8. Remove sun gear (7) .
3/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 6 g00865501
9. Use Tooling (B) and a suitable lifting device to remove carrier assembly (8). The weight of
carrier assembly (8) is approximately 30 kg (55 lb).
Illustration 7 g00865534
10. Remove retaining ring (9), spacer (10), and sun gear (11) .
Illustration 8 g00865551
4/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 11. Drive spring pin (13) into shaft (14). Remove shaft (14) and gear assembly (12) .
Illustration 9 g00865614
12. Remove washers (15) and bearing (16) from gear (17). Remove spring pin (13) from shaft
(14) .
13. Repeat Steps 11 and 12 for the remaining gear assemblies.
Illustration 10 g00865671
14. Use Tooling (B) and a suitable lifting device to remove carrier assembly (18). The weight of
carrier assembly (18) is approximately 68 kg (150 lb).
5/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 11 g00865717
15. Remove retaining ring (19), spacer (20), and gear assembly (21) .
Illustration 12 g00865736
16. Drive spring pin (22) into planetary shaft (24). Remove planetary shaft (24) and gear
assembly (23) .
Illustration 13 g00865753
6/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. 17. Remove thrust washers (27) and bearing (26) from planetary gear (25). Remove spring pin
(22) from shaft (24) .
18. Repeat Steps 16 and 17 for the remaining gear assemblies.
Illustration 14 g01192348
19. Use Tooling (C) and a suitable lifting device to remove carrier assembly (28). The weight of
carrier assembly (28) is approximately 107 kg (235 lb).
20. Remove spacer (29) .
Illustration 15 g00865872
21. Drive spring pin (31) into shaft (32). Remove planetary shaft (32) and gear assembly (30) .
7/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 16 g00865884
22. Remove thrust washers (33) and (37), and bearings (34) and (36) from planetary gear (35).
Remove spring pin (31) from shaft (32) .
23. Repeat Steps 21 and 22 for the remaining gear assemblies.
Illustration 17 g01192382
24. Use Tooling (C) and a suitable lifting device to remove ring gear (38) from housing (39).
The weight of ring gear (38) is approximately 125 kg (275 lb).
8/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 18 g00865939
25. Remove O-ring seal (40) from the main housing.
Illustration 19 g00865955
26. Place suitable cribbing under the final drive in order to support the motor housing.
Illustration 20 g00866047
9/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP52...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 21 g00865969
Dimension (X) is equal to 14.0 mm (0.55 inch).
27. Use Tooling (D) to remove bolts (41) from gear (42) .
Illustration 22 g00866066
28. Install Tooling (E) in the gear, as shown. Tighten Tooling (E) evenly in order to loosen the
gear. Remove the gear from the motor housing.
Illustration 23 g00866072
29. Remove shims (43) from the motor housing.
10/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 24 g00866085
30. Attach Tooling (C) and a suitable lifting device to main housing (45). The weight of main
housing (45) is approximately 191 kg (420 lb).
31. Remove bolts (44) .
32. Use the suitable lifting device to separate main housing (45) from motor housing (39) .
Note: Motor housing (39) will rest on the suitable cribbing.
Illustration 25 g00866095
33. Remove bearing cone (46) from the main housing.
11/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 26 g00866100
34. Remove Duo-Cone seal (47), and bearing cups (48) and (49) from the main housing.
Illustration 27 g00866156
35. Remove pins (50), if necessary.
36. Remove bearing cone (51) .
37. Remove Duo-Cone seal (52) from the motor housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Nov 4 00:57:56 UTC+0800 2020
12/12
374D L Excavator PAX00001-UP (MACHINE) POWERED BY C15 Engine(SEBP...
2020/11/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...