This document provides instructions for disassembling and assembling a travel motor. It begins with removing external components from the travel motor like the head and plates. It then describes removing internal components from the motor housing individually, like springs, seals, pistons, and the rotating group. Reassembly instructions are also provided, listing the components and specifying the order and orientation to install them back into the motor housing. Precautions are given to clean parts and avoid contamination of hydraulic components.
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe cleaning parts and ensuring markings are made to aid reassembly. Safety notices are included regarding contained fluids, spring forces, and contamination prevention.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...hhfjksekmm
This document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, bearings, and housing. Precautions are given to properly support heavy parts, avoid damage, and prevent contamination. Tools required are also listed.
Caterpillar cat 345 d l vg excavator (prefix nlm) service repair manual (nlm0...fjkskedmme
The document provides instructions for disassembling and assembling a 345D L VG excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing pieces. It then lists 31 steps for assembly, reinstalling these components in reverse order and noting to clean all parts and replace seals and gaskets. Precise measurements and torque specifications are given to ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix rgd) service repair manual (rgd0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston, disks, and housing keys. Reassembly requires reversing the disassembly steps and ensuring parts are cleaned and placed back in their original locations and orientations. Special tools are listed to aid in removal and installation of components.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix rgg) service repair manual (rgg0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston and rotating group. Reassembly requires reinstalling these parts in reverse order, taking care to mark components' locations and clean all parts to prevent contaminating the hydraulic system. Proper tools are listed to facilitate disassembly and assembly.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 345 c excavator (prefix tba) service repair manual (tba00001 ...fjskekmdm
This document provides instructions for disassembling and assembling the travel motor of a 345C excavator. The disassembly procedure involves 31 steps to remove parts like the head, plates, seals, pistons, and housing. The assembly procedure describes 33 steps to reinstall these parts in reverse order, noting that components must be cleaned and new seals used. Proper tooling and torque specifications are listed for each step.
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe cleaning parts and ensuring markings are made to aid reassembly. Safety notices are included regarding contained fluids, spring forces, and contamination prevention.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...hhfjksekmm
This document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, pins, bearings, and housing. Precautions are given to properly support heavy parts, avoid damage, and prevent contamination. Tools required are also listed.
Caterpillar cat 345 d l vg excavator (prefix nlm) service repair manual (nlm0...fjkskedmme
The document provides instructions for disassembling and assembling a 345D L VG excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, seals, pistons, and housing pieces. It then lists 31 steps for assembly, reinstalling these components in reverse order and noting to clean all parts and replace seals and gaskets. Precise measurements and torque specifications are given to ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix rgd) service repair manual (rgd0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston, disks, and housing keys. Reassembly requires reversing the disassembly steps and ensuring parts are cleaned and placed back in their original locations and orientations. Special tools are listed to aid in removal and installation of components.
Caterpillar cat 349 d l excavator (prefix rbj) service repair manual (rbj0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 13 steps for assembly, including installing seals, spacers, washers and plugs. Precautions are provided to keep parts clean and in proper orientation to avoid contamination and ensure correct assembly.
Caterpillar cat 345 d l excavator (prefix rgg) service repair manual (rgg0000...hhfjksekmm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists 31 steps to fully disassemble the travel motor by removing components like the head, plates, seals, pins, brake piston and rotating group. Reassembly requires reinstalling these parts in reverse order, taking care to mark components' locations and clean all parts to prevent contaminating the hydraulic system. Proper tools are listed to facilitate disassembly and assembly.
Caterpillar cat 349 d l excavator (prefix pzg) service repair manual (pzg0000...cdsaas
The document provides instructions for disassembling and assembling a travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, seals and pins. It then lists 28 steps for assembly, installing components like washers, spacers, seals and the piston in reverse order of disassembly. Precautions are provided to keep parts clean and properly identify components to ensure correct reassembly.
Caterpillar cat 345 c excavator (prefix tba) service repair manual (tba00001 ...fjskekmdm
This document provides instructions for disassembling and assembling the travel motor of a 345C excavator. The disassembly procedure involves 31 steps to remove parts like the head, plates, seals, pistons, and housing. The assembly procedure describes 33 steps to reinstall these parts in reverse order, noting that components must be cleaned and new seals used. Proper tooling and torque specifications are listed for each step.
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...jjfksekdmejik
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...fjjskqazxedmmem
This document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, bearings, pistons, housing keys and more. Tools required are also listed. Proper cleaning, identification and installation of parts in their original locations is emphasized to avoid damage and prevent contamination.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...ifkkdkmdmd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual (RAJ00001...jdkskmmdmd1
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...jjfksekdmejik
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is done in reverse order.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...fjisejkdmd8id
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions emphasize cleaning parts and ensuring they are reinstalled in their original locations to avoid damage and contamination.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...yqen95561858
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed in tables for both disassembly and assembly. Cautions are provided about cleaning parts and preventing contamination of hydraulic components.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed in tables for both disassembly and assembly. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is done in reverse order.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...ifkkdkmdmd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 31 steps for assembly, replacing seals and installing components in reverse order, like the piston assemblies, disks, plates and head. Precautions are provided to keep parts clean and in correct orientation to avoid damaging components.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...jdkksmemmd
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed for both disassembly and assembly procedures. Cautions are provided about cleaning parts and preventing contamination of hydraulic components.
Mc cormick mc series (2002 2007) - mc01 - mc power 6 (6 cyl) tractor service ...fjjskqazxedmmem
This document contains parts listings and diagrams for engine and other components for a McCormick tractor model. It lists over 100 individual part numbers, descriptions and quantities for systems like the engine, radiator, air intake, exhaust and others. The parts are identified numerically with the corresponding diagram to allow for identification and replacement of specific components.
Mc cormick mc series (2002 2007) - mc01 - mc (4 cyl) tractor service repair m...fjjskqazxedmmem
This document provides parts information for various engine and cooling system components for McCormick tractors from model years 2002-2007, including radiators, radiator assemblies, hoses, fans, thermostats, oil coolers, belts, and other related parts. The document lists each part number, description, quantity, and other identifying information for easy reference when looking up replacement parts.
More Related Content
Similar to Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj00001 and up)
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...jjfksekdmejik
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...fjjskqazxedmmem
This document provides step-by-step instructions for disassembling a travel motor. It lists 31 steps to remove parts like the head, plates, seals, bearings, pistons, housing keys and more. Tools required are also listed. Proper cleaning, identification and installation of parts in their original locations is emphasized to avoid damage and prevent contamination.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj0000...ifkkdkmdmd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual (RAJ00001...jdkskmmdmd1
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components such as the head, bearing, brake piston, disks, and seals. Notes provide important details like component weights and markings needed for reassembly. The instructions ensure the travel motor is properly disassembled and reassembled.
Caterpillar Cat 345D L Excavator (Prefix RAJ) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and gives step-by-step instructions to remove components like the head, plates, seals, and piston assemblies. The disassembly process is described in 31 steps. The assembly section then lists 13 steps to reinstall components in reverse order, making sure to clean parts and apply new seals and lubricants.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...jjfksekdmejik
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is done in reverse order.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...fjisejkdmd8id
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...f8sejdkdmdijd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions emphasize cleaning parts and ensuring they are reinstalled in their original locations to avoid damage and contamination.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...yqen95561858
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed in tables for both disassembly and assembly. Cautions are provided about cleaning parts and preventing contamination of hydraulic components.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed in tables for both disassembly and assembly. Cautions are provided about cleaning parts and preventing contamination of hydraulic systems.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...f7usuejkdkddm3
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...ufs89eodkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is done in reverse order.
Caterpillar cat 345 d l excavator (prefix rae) service repair manual (rae0000...ifkkdkmdmd
This document provides instructions for disassembling and assembling the travel motor of a 345D L excavator. It lists the required tools and gives step-by-step instructions for removing components like the head, brake piston, rotating group, and seals. The instructions describe taking identifying marks on parts and cleaning components to prevent contamination. Reassembly is the reverse of the disassembly process.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...jdkskmmdmd1
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 31 steps for assembly, replacing seals and installing components in reverse order, like the piston assemblies, disks, plates and head. Precautions are provided to keep parts clean and in correct orientation to avoid damaging components.
Caterpillar Cat 345D L Excavator (Prefix RAE) Service Repair Manual (RAE00001...jdkksmemmd
The document provides instructions for disassembling and assembling a 345D L excavator travel motor. It lists 31 steps for disassembly, removing components like the head, plates, disks, piston assemblies. It then lists 13 steps for assembly, including installing seals, spacers, washers, and plugs in the proper orientation and torque specifications. Tools required are listed for both disassembly and assembly procedures. Cautions are provided about cleaning parts and preventing contamination of hydraulic components.
Similar to Caterpillar cat 345 d l excavator (prefix raj) service repair manual (raj00001 and up) (20)
Mc cormick mc series (2002 2007) - mc01 - mc power 6 (6 cyl) tractor service ...fjjskqazxedmmem
This document contains parts listings and diagrams for engine and other components for a McCormick tractor model. It lists over 100 individual part numbers, descriptions and quantities for systems like the engine, radiator, air intake, exhaust and others. The parts are identified numerically with the corresponding diagram to allow for identification and replacement of specific components.
Mc cormick mc series (2002 2007) - mc01 - mc (4 cyl) tractor service repair m...fjjskqazxedmmem
This document provides parts information for various engine and cooling system components for McCormick tractors from model years 2002-2007, including radiators, radiator assemblies, hoses, fans, thermostats, oil coolers, belts, and other related parts. The document lists each part number, description, quantity, and other identifying information for easy reference when looking up replacement parts.
Mc cormick gx series tier 3 (2004 2007) - rp81 - gx55 gxh55 tractor service ...fjjskqazxedmmem
This document contains a parts list for engine components. It includes over 30 individual parts needed for engine replacement or overhaul, including tappets, rods, shafts, bearings, pistons, gears, bolts and other hardware. Quantities and part numbers are provided for each item. The parts are for Gx series tier 3 tractors from 2004-2007, models GX55 and GXH55.
Mc cormick gx series tier 3 (2004 2007) - rp81 - gx50 gxh50 tractor service ...fjjskqazxedmmem
This document contains parts lists and assembly diagrams for engine components. It includes over 30 individual parts with descriptions and part numbers. The parts are for a Tier 3 GX series engine from 2004-2007 and include pistons, rings, valves, gears, shafts, housings and other internal engine components.
Mc cormick gx series tier 1 (2002 2004) - rp80 - gx40 gxh40 tractor service ...fjjskqazxedmmem
This document provides a parts list and assembly instructions for engine components. It includes over 30 individual parts, identifying each part number, name, quantity needed and installation steps. Key details include piston rings, connecting rod bearings, valves, springs and other internal engine parts. Installation times and torque specifications are provided for each step. Additional information notes when parts are for replacement or overhaul and identifies reference pages for some components.
Mc cormick dmax (2013 ) - rt70 - 115 tractor service repair manualfjjskqazxedmmem
This document contains parts diagrams and lists of components for an engine. It includes over 50 individual part numbers, descriptions and diagrams across multiple pages. The parts are for a Dmax 2013- McCormick RT70 115 engine and include items like pistons, valves, pumps, filters, gaskets and other engine internals.
Mc cormick cx l tier 3 (2007-2013) - rp22 - 85 tractor service repair manualfjjskqazxedmmem
This document contains parts lists and diagrams for an engine replacement for a Cx-l tier 3 agricultural machine from 2007-2013. It includes over 150 individual part numbers, descriptions and quantities for components of the engine including the cylinder block, crankcase, pistons, rods, valves, gearbox and other systems. The parts are provided to perform a complete replacement of the 60.7kw engine.
Mc cormick cx l tier 3 (2007-2013) - rp22 - 70 tractor service repair manualfjjskqazxedmmem
This document contains parts lists and diagrams for engine components of a McCormick CX-L tier 3 engine from 2007-2013. It includes lists of parts needed for the cylinder block, crankcase, oil pan, timing components, pistons, connecting rods, balancer, coolant system and other engine subassemblies. The parts are identified by reference numbers and names to facilitate replacement or repair of components.
Mc cormick cx xtrashift tier 3 (2008 2009) - rpc2 - 100 tractor service repai...fjjskqazxedmmem
This document provides a list of components for repairing or replacing parts for engines. It includes descriptions of each part needed, the reference number, quantity required and notes about serial number ranges the part is needed for or service/replacement instructions. Key information includes part names and numbers, quantities, applicability notes and instructions to order replacement parts.
This document provides a list of engine components for a McCormick CX synchro tier 3 restyling from 2009-2011. It includes over 50 individual components such as pistons, rods, bearings, gaskets, screws, plugs, pumps, and sensors. Each component lists relevant information like part numbers, serial numbers, replacement kits, and notes indicating whether items are serviced individually or as assemblies.
Mc cormick cx synchro tier 3 (2008 2009) - rpc1 - 105 tractor service repair ...fjjskqazxedmmem
This document contains a list of engine components for a McCormick CX synchro tier 3 engine from 2008-2009. Each component lists relevant part numbers, reference numbers, replacement kits, and other identifying information. The purpose is to provide a catalog of replacement parts for servicing this engine model.
Mc cormick cx synchro tier 3 (2008 2009) - rpc1 - 100 tractor service repair ...fjjskqazxedmmem
This document contains parts lists and assembly diagrams for engine components. It lists individual part numbers, descriptions, quantities and references other parts they are components of. Notes indicate when parts are not serviced individually and need to be replaced as part of larger assemblies or kits.
Mc cormick cx 110 tier3 tractor service repair manualfjjskqazxedmmem
This document contains parts listings and component information for various engine and tractor parts. It includes identification numbers, part names, replacement kits, and notes indicating whether parts are serviced or ordered as replacements. The parts listed are for engines, injection pumps, cylinder heads, oil and water pumps, rocker arms, and other engine components.
This document contains parts listings and technical specifications for a Massey Ferguson 7485 tractor. It includes 33 items related to the engine and its components such as the cylinder block, timing gear housing, crankshaft, pistons, and connecting rods. Each item lists the part number, quantity, description, and any applicable comments. It provides a detailed breakdown of the engine parts to support maintenance and repairs.
This document provides exploded diagrams and part lists for the engine and related components of a Massey Ferguson 7480 tractor with a Perkins Tier 3 diesel engine. It includes 42 items detailing individual parts such as the cylinder block, crankshaft, pistons, cylinder head, valves, rocker arms, starter motor, alternator, and other engine parts. Footnotes provide additional part number information and component comments.
Massey ferguson mf390 tractor ( b18009) parts catalogue manualfjjskqazxedmmem
This document provides parts information for a Massey Ferguson 390 tractor engine. It includes lists of parts with part numbers, quantities and descriptions for the cylinder block, crankshaft, pistons, cylinder head and other engine components. It also includes footnotes providing additional details and specifications for some parts. Serial numbers or build lists are referenced for variants or updated parts.
Kubota b2100 hsd tractor parts catalogue manualfjjskqazxedmmem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes that may be included and their meanings. The document also lists an index of product sections and pages that the parts book covers.
Kubota b2100 e tractor parts catalogue manualfjjskqazxedmmem
The document provides instructions for parts books, including definitions of column headings in parts number pages. It lists country codes that may be included for parts that differ between countries. It then provides an index and sample pages from a parts book for a B2100E product, including part numbers, descriptions, quantities, serial number ranges and other details.
Kubota b2100 d tractor parts catalogue manualfjjskqazxedmmem
The document provides instructions and part numbers for a parts book. It defines the column headings used on part number pages, including the reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It also notes country codes that may be included and their meanings.
Komatsu wa200 6 wheel loader service repair manual sn75001 and upfjjskqazxedmmem
This document provides information about Komatsu wheel loaders, including:
- The shop manual covers models WA200-6 and WA200PZ-6.
- Sections include specifications, maintenance procedures, testing and adjustments, troubleshooting, and electrical systems.
- Technical details are provided for the engine, power train, steering, brakes, hydraulics, work equipment and electrical systems.
- Testing, adjustment and troubleshooting procedures are described for components like the engine, hydraulics, electrical systems and more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 345D L EXCAVATOR RAJ
Configuration: 345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile
Hydraulic Power Units Machine Systems
Media Number -RENR9574-10 Publication Date -01/08/2014 Date Updated -18/09/2018
i02407350
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Start By:
a. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove" .
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3E-3879 Eyebolt 1
B 1P-0074 Slide Hammer Puller 1
C 6V-3010 Puller Group 1
D 4C-8359 Eyebolt 1
E 9S-9152 Bearing Puller 1
F 1P-1862 Pliers 1
G 1P-0510 Driver Group 1
H 1U-7600 Slide Hammer Puller 1
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
1/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
NOTICE
Failure to properly assemble parts or failure to follow established
procedures can lead to damage to the parts and assembly.
To avoid damage to parts, always identify and mark the parts so that
they can be installed into the same location. Never force parts during
assembly. Keep parts clean and lubricated.
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
Note: If a failure occurs, an accurate diagnosis of the cause can prevent a recurrence. Information
is available to analyze failures for piston pumps and motors. Refer to Special Publication,
SEBD0641, "Analyzing Axial Piston Pump and Motor Failures".
Note: Inspect all parts. If any parts are worn or damaged use new parts for replacement. The
installation of used parts during reconditioning is acceptable. Reuse and salvage information is
available on piston pumps. Refer to Guideline for Reusable Parts and Salvage Operations,
SEBF8032, "Piston Pumps and Motors". During reconditioning, correct any conditions that might
have caused the original failure.
2/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 1. Thoroughly clean the outside of the travel motor prior to disassembly. Fasten the travel
motor to a suitable holding fixture in a vertical position. The weight of the travel motor is
141 kg (310 lb).
Illustration 1 g00627438
2. Remove displacement change valve (1) from the head of the travel motor.
Illustration 2 g00624938
3. Remove O-ring seals (2) and rings (3) from the displacement change valve.
Illustration 3 g00628657
3/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove plugs (5) from the head. Remove an O-ring seal from each plug.
5. Remove outer bolts (4) from the head of the travel motor.
Illustration 4 g00624949
6. Use Tooling (A) and a suitable lifting device to remove the head of the travel motor from
the travel motor housing. The weight of head (6) is approximately 43 kg (95 lb).
Note: There are pins (7) that may fall out of the inside of the head when the head is
removed.
Note: Be careful during the removal of head (6) from the travel motor housing. Be careful
not to scratch mating surfaces or damage the mating surfaces of the components.
4/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g00624953
7. Turn over the head. If pins (7) are in the bottom side of the head, remove the pins.
Illustration 6 g00627405
8. Remove port plate (8) and O-ring seal (9) from the head.
Illustration 7 g00625967
9. Use Tooling (B) in order to remove bearing (10) from the head of the travel motor.
5/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 8 g00627391
10. Remove plate (11) and remove springs (12) from the travel motor housing.
11. Remove O-ring seals (13) from the upper surface of the travel motor housing.
Illustration 9 g00627377
12. Install Tooling (C) on the brake piston (14). Remove the brake piston.
Illustration 10 g00625888
13. Remove O-ring seals (15) and the backup rings from the brake piston.
Note: Make sure that you take note of the location of the O-rings versus the backup rings.
6/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 11 g00625891
14. Remove separator plates (16) from the travel motor housing.
Illustration 12 g00666743
15. Remove disks (17) from the travel motor housing.
Illustration 13 g00626837
16. Install Tooling (D) to the shaft and use a suitable lifting device in order to remove the
rotating group from the travel motor housing. The weight of the rotating group is 29 kg
(65 lb).
7/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Note: Do not allow the components of the rotating group to come apart during the removal
from the travel motor. All of the components in the rotating group must be reinstalled in the
component's original location.
Illustration 14 g00626633
17. Turn over the rotating group. Remove shaft assembly (18) from the rotating group.
Illustration 15 g00666621
Illustration 16 g00625900
18. Use a suitable press to remove bearing (19) from shaft assembly (18).
8/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00666622
19. Use Tooling (E) and a suitable press in order to remove inner race (20) from shaft assembly
(18).
Illustration 18 g00625908
20. Remove cam plate (21) from the rotating group.
Illustration 19 g00625911
21. Retainer (22) and piston assemblies (23) are nonserviceable separately. Prior to the removal
of the retainer and the piston assemblies from barrel (24), put identification marks on the
piston assemblies, the retainer and the barrel for assembly purposes.
9/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 22. The piston assemblies must be reinstalled in the original bores in the retainer and the barrel.
23. Remove retainer (22) and piston assemblies (23) from barrel (24).
24. Separate the piston assemblies from the retainer.
Illustration 20 g00625917
Note: The orientation of the washers (25) is important. The washers must be reinstalled on
barrel (24) in the same orientation.
25. Remove guide (26) and outer spacer (27) from barrel (24).
26. Remove washers (25) and inner spacer (28) from the barrel.
Illustration 21 g00625937
27. Remove keys (29) from the travel motor housing.
10/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 22 g00625920
28. Use Tooling (F) to remove retaining ring (30) from the shaft end of the travel motor
housing.
Illustration 23 g00625936
Illustration 24 g00636454
29. Use Tooling (G) to remove lip seal (31) from the travel motor housing if the shaft has been
removed from the travel motor.
11/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 30. Use Tooling (H) to remove lip seal (31) if the shaft has not been removed from the travel
motor. Place the travel motor in a vertical position when you use Tooling (H) to remove the
lip type seal.
Illustration 25 g00625976
31. Remove plug (33) and piston (32) from the travel motor housing. Remove O-ring seal (34)
from the plug.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jun 29 15:03:04 UTC+0800 2020
12/12345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 345D L EXCAVATOR RAJ
Configuration: 345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine
Disassembly and Assembly
345D, 349D and 349D2 Excavators and 345D MHPU and 349D MHPU Mobile
Hydraulic Power Units Machine Systems
Media Number -RENR9574-10 Publication Date -01/08/2014 Date Updated -18/09/2018
i03778971
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 3E-3879 Eyebolt 1
D 4C-8359 Eyebolt 1
F 1P-1862 Pliers 1
G 1P-0510 Driver Group 1
J 4C-4030 Thread Lock Compound 1
K 180-6533 Seal Driver 1
L 6V-7030 Micrometer Depth Gauge 1
M 8T-0447 Calipers 1
N 1U-6396 O-Ring Assembly Compound 1
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
1/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
Note: If a failure occurs, an accurate diagnosis of the cause can prevent a recurrence. Information
is available to analyze failures for piston pumps and motors. Refer to Special Publication,
SEBD0641, "Analyzing Axial Piston Pump and Motor Failures".
Note: Inspect all parts. If any parts are worn or damaged use new parts for replacement. The
installation of used parts during reconditioning is acceptable. Reuse and salvage information is
available on piston pumps. Refer to Guideline For Reusable Parts and Salvage Operations,
SEBF8032, "Piston Pumps and Motors". During reconditioning, correct any conditions that might
have caused the original failure.
Note: O-ring seals , gaskets, and seals should always be replaced. A used O-ring seal may not
have the same sealing properties as a new O-ring seal. Use Tooling (H) during the assembly
procedure.
Note: Apply a light film of "10W" oil to all components before assembly.
Illustration 1 g01204890
1. Install O-ring seal (34) on plug (33).
2. Install piston (32) and the plug in the travel motor body. Tighten the plug to a torque of
430 ± 40 N·m (317 ± 30 lb ft).
2/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 2 g01204916
Illustration 3 g01204919
3. Apply a thin coat of Tooling (J) on the outer surfaces of lip seal (31).
4. Use Tooling (K) and a suitable hammer to drive the lip seal into the travel motor body.
Drive the seal downward until Tooling (K) makes contact with the travel motor housing.
5. Use Tooling (F) to install retaining ring (30) to the shaft end of the travel motor body.
Illustration 4 g01204923
6. Install keys (29) inside the travel motor body.
3/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 5 g01204924
7. Assemble washers (25), inner spacer (28) and outer spacer (27) in the proper orientation, as
shown.
Illustration 6 g01204931
8. Use Tooling (L) to measure the distance from the outer spacer to the surface of the table.
The distance should be 22.1 ± 0.6 mm (0.87 ± 0.02 inch). If this measurement is off, check
orientation of the washers. If orientation is correct, replace washers and spacers with new
parts.
4/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 7 g00625917
9. Install inner spacer (28), washers (25), and outer spacer (27) to barrel (24).
10. Install guide (26) to the barrel.
Illustration 8 g00625911
11. Install piston assemblies (23) with retainer (22) in the piston assembly's original bore in
barrel (24).
Illustration 9 g00625908
12. Install cam plate (21) on the rotating group.
5/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 10 g00666621
Illustration 11 g00628062
13. Use a suitable press to install bearing (19) onto shaft assembly (18).
Illustration 12 g00668076
14. Use a suitable press in order to install inner race (20) onto shaft assembly (18).
Note: Place the two support plates under the lip of shaft assembly (18).
6/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 13 g00626633
15. Insert shaft assembly (18) in the rotating group.
Illustration 14 g00625891
Illustration 15 g00666743
16. Alternate disks (17) and separator plates (16) into the travel motor housing. Start with a
separator plate and end with a separator plate.
7/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 16 g00626837
17. Attach Tooling (D) to the shaft. Use a suitable lifting device in order to place barrel
assembly into the travel motor body.
Note: Align the notches of the cam plate with the keys in the travel motor body before you
lower the barrel assembly into the travel motor body.
Illustration 17 g01204938
18. Use Tooling (M) to measure the depth from the top surface of the travel motor body to the
bronze face of the barrel assembly. The distance should be 32.2 ± 2 mm (1.27 ± 0.08 inch).
If this measurement is off, check orientation of the barrel assembly. Also check if the cam
plate is properly seated on the keys.
8/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
23. Illustration 18 g00625888
Illustration 19 g00667938
(15) O-Ring seals
19. Install O-ring seals (15) and the backup rings on the brake piston.
Note: Make sure that you install the backup ring and the O-ring seal in the original position.
Refer to Illustration 19.
9/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP51...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 20 g00629015
20. Install brake piston (14) in the body of the travel motor by hand. It may be necessary to use
a soft faced hammer to seat the brake piston correctly.
Illustration 21 g01204953
21. Use Tooling (M) to measure the distance from the top of the brake piston (14) to the top
surface of the travel motor body. The distance should be 20.8 ± 1.0 mm (0.82 ± 0.04 inch).
If this measurement is off, drive the brake piston further into the travel motor body.
Illustration 22 g00627391
22. Install springs (12) and plate (11).
10/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 23. Install O-ring seals (13).
Illustration 23 g01204965
24. Use Tooling (G) to drive the bearing into the head.
Illustration 24 g00627405
25. Install O-ring seal (9) onto the head.
26. Install port plate (8) on the head. It may be necessary to apply a small amount of grease to
the port plate in order to hold the port plate in place during the installation of the head.
Illustration 25 g01205007
11/13345D L Excavator RAJ00001-UP (MACHINE) POWERED BY C13 Engine(SEBP...
2020/6/29https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...