This document provides instructions for disassembling and assembling a travel motor. The disassembly process involves removing 27 different components of the travel motor including the head, springs, plates, seals, and housing cover. The assembly process lists 28 steps for reinstalling these components in the reverse order, noting the importance of lubrication, torque specifications, and proper alignment of parts. Tools including an adapter, bolts, eyebolt, retaining ring pliers, and bearing puller are required for the disassembly and assembly processes.
Caterpillar cat 336 e l excavator (prefix teg) service repair manual (teg0000...fjsekqazxkdmmem
The document provides disassembly and assembly instructions for a 336E and 336E L excavator travel motor. It lists required tools and parts and outlines 27 steps to disassemble the travel motor, removing components like the head, springs, brake piston, and seals. It then describes 21 steps for reassembling the travel motor, providing notes on lubrication and proper positioning of parts like the brake piston, cam plate, and head. The instructions are accompanied by illustrations of each step for clarification.
Caterpillar cat 336 e excavator (prefix teg) service repair manual (teg00001 ...fjekkdmmem
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. It contains 27 steps for disassembly, removing components like the head, springs, brake piston, plates and seals. The 27 assembly steps install components in reverse order, including keys, seals, bearings, piston assemblies and the rotating assembly. Precautions are provided for spring loaded components and proper positioning of parts is emphasized.
Caterpillar cat 336 e l excavator (prefix teg) service repair manual (teg0000...fjskekmdm
The document provides disassembly and assembly instructions for a 336E and 336E L excavator travel motor. It lists required tools and parts and outlines 27 steps to disassemble the travel motor, removing components like the head, springs, brake piston, and seals. It then describes 21 steps for reassembling the travel motor, providing notes on lubrication and proper positioning of parts like the piston assemblies, cam plate, and brake piston.
Caterpillar cat 336 e excavator (prefix teg) service repair manual (teg00001 ...fjjskekdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. It contains 27 steps for disassembly, removing components like the head, springs, brake piston, plates and seals. The 27-step assembly procedure instructs how to rebuild the travel motor by installing components in reverse order, like seals, piston actuator, cover and retaining rings. Precautions are provided regarding spring force and proper positioning of parts. Tools required are listed in a table.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...fjsekdmmeed
1. The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator.
2. The disassembly procedure involves removing 27 different parts from the travel motor in a specific order using various tools.
3. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and align markings to ensure proper assembly.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like the piston assemblies and cam plate. Tools required include an adapter, nuts, bolts, eyebolt, retaining ring pliers, bearing puller group, and loctite.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys. Special tools are required for tasks like removing races and installing seals. Proper torque values and cautions for spring-loaded parts are also noted.
Caterpillar cat 336 e l excavator (prefix teg) service repair manual (teg0000...fjsekqazxkdmmem
The document provides disassembly and assembly instructions for a 336E and 336E L excavator travel motor. It lists required tools and parts and outlines 27 steps to disassemble the travel motor, removing components like the head, springs, brake piston, and seals. It then describes 21 steps for reassembling the travel motor, providing notes on lubrication and proper positioning of parts like the brake piston, cam plate, and head. The instructions are accompanied by illustrations of each step for clarification.
Caterpillar cat 336 e excavator (prefix teg) service repair manual (teg00001 ...fjekkdmmem
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. It contains 27 steps for disassembly, removing components like the head, springs, brake piston, plates and seals. The 27 assembly steps install components in reverse order, including keys, seals, bearings, piston assemblies and the rotating assembly. Precautions are provided for spring loaded components and proper positioning of parts is emphasized.
Caterpillar cat 336 e l excavator (prefix teg) service repair manual (teg0000...fjskekmdm
The document provides disassembly and assembly instructions for a 336E and 336E L excavator travel motor. It lists required tools and parts and outlines 27 steps to disassemble the travel motor, removing components like the head, springs, brake piston, and seals. It then describes 21 steps for reassembling the travel motor, providing notes on lubrication and proper positioning of parts like the piston assemblies, cam plate, and brake piston.
Caterpillar cat 336 e excavator (prefix teg) service repair manual (teg00001 ...fjjskekdm
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. It contains 27 steps for disassembly, removing components like the head, springs, brake piston, plates and seals. The 27-step assembly procedure instructs how to rebuild the travel motor by installing components in reverse order, like seals, piston actuator, cover and retaining rings. Precautions are provided regarding spring force and proper positioning of parts. Tools required are listed in a table.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...fjsekdmmeed
1. The document provides instructions for disassembling and assembling the travel motor of a 336E L excavator.
2. The disassembly procedure involves removing 27 different parts from the travel motor in a specific order using various tools.
3. The assembly procedure instructs assembling the travel motor in the reverse order and notes to lubricate parts and align markings to ensure proper assembly.
Caterpillar cat 336 e ln excavator (prefix yce) service repair manual (yce000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating parts and ensuring proper alignment of components like the piston assemblies and cam plate. Tools required include an adapter, nuts, bolts, eyebolt, retaining ring pliers, bearing puller group, and loctite.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar cat 336 e l excavator (prefix yce) service repair manual (yce0000...kmf9ioseodk
This document provides the disassembly and assembly procedures for a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys. Special tools are required for tasks like removing races and installing seals. Proper torque values and cautions for spring-loaded parts are also noted.
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar Cat 336E L Excavator (Prefix TMZ) Service Repair Manual (TMZ00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e l excavator (prefix tmz) service repair manual (tmz0000...kmf9ioseodk
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor housing including the head, springs, brake piston, plates, and seals. The assembly procedure instructs installing these 27 parts in reverse order and provides notes to ensure proper installation of parts like pistons, seals, and bearing races. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, bearing puller, and Loctite.
Caterpillar Cat 336E L and 336E LN Excavator (Prefix TMZ) Service Repair Manu...yan77xunhao
This document provides the disassembly and assembly procedures for the travel motor of a 336E LN excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installation and ensuring proper alignment of parts. Tools such as an eyebolt, retaining ring pliers, and bearing puller are required to complete the procedures.
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e ln excavator (prefix tmz) service repair manual (tmz000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e l excavator (prefix tmz) service repair manual (tmz0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor housing including the head, springs, brake piston, plates, and seals. The assembly procedure instructs installing these 27 parts in reverse order and provides notes to ensure proper installation of parts like pistons, seals, and bearing races. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, bearing puller, and Loctite.
Caterpillar Cat 330D L Excavator (Prefix B6H) Service Repair Manual (B6H00001...f8uesjdkdmdm
The document provides instructions for installing a hydraulic lockout control on an excavator. It describes:
1) Installing the hydraulic lockout control using bolts and securing a switch.
2) Installing a panel and screws to cover the components.
3) The document contains detailed step-by-step instructions and illustrations for assembling and disassembling various components of an excavator such as a piston motor and fan. Safety warnings are provided throughout.
This document provides assembly instructions for repairing the transmission of a 329DL excavator. It consists of 52 steps to assemble the transmission components in the correct order, including installing gaskets, bearings, pistons, seals, covers, and other parts into the pump housing. Precautions are provided for steps involving spring tension. Required tools include a transmission repair stand, link brackets, driver group, seal guide, and retaining ring pliers.
This document provides instructions for disassembling and assembling the recoil spring on a 329D L excavator. It describes:
1. The required tools and sockets for disassembly and assembly.
2. The disassembly procedure which involves using a special recoil spring bench tool to safely compress the spring and remove components.
3. The assembly procedure which again uses the bench tool to compress the spring and measure its length during assembly. Proper spring length is critical.
This document provides repair instructions for a 329DL excavator transmission. It outlines 38 steps to disassemble and reassemble the transmission, including instructions to clean parts, replace seals and O-rings, measure bearing clearance using shims, and install various transmission components like gears, seals, and housing pieces. Special tools are required for tasks like installing duo-cone seals and bearing surfaces must be coated with anti-seize compound before assembly.
This document provides assembly instructions for a service repair manual in 3 sentences:
It outlines 53 steps to assemble an excavator pump, including installing various components like gaskets, bearings, pistons, seals and covers onto the pump housing in the proper order and orientation. Precautions are noted for installing springs and other parts that could cause injury. Required tools are listed and each assembly step includes an illustration for reference.
Caterpillar Cat 329D2 and 329D2L Excavator (Prefix THW) Service Repair Manual...f8uesjdkdmdm
The document provides instructions for removing and installing a flywheel on a C7.1 engine. It describes:
1) Removing the bolts and electric starting motor to access the flywheel.
2) Installing guide studs and using lifting equipment to remove the flywheel.
3) Inspecting the flywheel and removing the ring gear if needed.
4) Cleaning and preparing the surfaces, then installing the flywheel using lifting equipment and guide studs, and tightening the bolts to the specified torque.
Caterpillar Cat 329D2 and 329D2L Excavator (Prefix RGA) Service Repair Manual...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a swing motor and swing drive. Key steps include:
1. Cleaning all parts thoroughly before assembly and applying a light film of hydraulic oil.
2. Using retaining ring pliers to install a retaining ring and assembling plates, pistons, springs, and valves in the proper sequence.
3. Lifting the swing motor or drive using lifting brackets and removing bolts to separate the components.
Caterpillar Cat 326D2 L Excavator (Prefix KER) Service Repair Manual (KER0000...f8uesjdkdmdm
This document provides the disassembly procedure for a travel motor in 27 steps. It begins by cleaning the outside of the travel motor and fastening it vertically. The first steps include removing the head and various internal components like seals, springs, plates, and pistons. Later steps dismantle the rotating assembly, remove bearings from the shaft, and disassemble the barrel assembly. Throughout, care is taken to mark components for reinstallation in their original positions. Required tools are also listed.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...f8uesjdkdmdm
The document provides instructions for removing and installing the valve mechanism cover base and cylinder head on a Caterpillar 329D excavator powered by a C7 engine. Key steps include:
1. Removing bolts and disconnecting harness assemblies to remove the valve mechanism cover base.
2. Draining coolant, removing supports and clamps, and disconnecting tubes and hoses to remove the cylinder head.
3. Installing a new gasket and torquing bolts to specified values to install the cylinder head. Reconnecting all tubes, hoses and harness assemblies.
1. The document provides instructions for removing and installing the valve mechanism cover base and cylinder head on a Caterpillar 329D excavator powered by a C7 engine.
2. The removal procedure includes disconnecting harness assemblies, removing bolts, and draining coolant from the cooling system.
3. The installation procedure specifies applying anti-seize compound to bolts and tightening them in a numerical sequence to the specified torques. Connecting harness assemblies and installing supports are also described.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
This document provides instructions for disassembling a travel motor. It begins by having the technician clean and secure the travel motor vertically. They are instructed to mark the head and body for alignment during reassembly. Over 25 steps are then outlined to remove various components of the travel motor like the head, brake piston, plates, and barrel assembly. Throughout, technicians are warned to be careful not to damage parts and ensure components are reinstalled in their original positions.
The document provides the disassembly procedure for a travel motor in 27 steps. It begins by removing the travel motor and cleaning it. Key steps include removing the head, brake piston, friction plates, and rotating assembly. The rotating assembly contains a shaft that requires removing retaining rings and bearing races using various tools. Piston assemblies are also removed from the barrel assembly after marking their positions.
Caterpillar Cat 325D L EXCAVATOR (Prefix T2S) Service Repair Manual (T2S00001...f8uesjdkdmdm
The document provides instructions to disassemble a final drive for a 325D L excavator. Key steps include:
1. Cleaning and marking the final drive assembly.
2. Removing the cover and gears using various tools.
3. Taking apart the carrier assemblies by removing pins, washers, and gears.
4. Using presses and hammers to separate additional components from the housing.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
More Related Content
Similar to Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001 and up).pdf
This document provides instructions for disassembling and assembling a 336E excavator travel motor. The disassembly procedure involves 27 steps to remove components like the motor head, springs, brake piston, rotating assembly, and seals. The assembly procedure describes 28 steps and requires various tools to reinstall the components in the reverse order of disassembly while ensuring proper alignment and torque specifications are followed. Precautions are provided to watch for spring forces and avoid damaging mating surfaces.
Caterpillar Cat 336E L Excavator (Prefix TMZ) Service Repair Manual (TMZ00001...f8usiejdkmdd
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e l excavator (prefix tmz) service repair manual (tmz0000...kmf9ioseodk
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor housing including the head, springs, brake piston, plates, and seals. The assembly procedure instructs installing these 27 parts in reverse order and provides notes to ensure proper installation of parts like pistons, seals, and bearing races. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, bearing puller, and Loctite.
Caterpillar Cat 336E L and 336E LN Excavator (Prefix TMZ) Service Repair Manu...yan77xunhao
This document provides the disassembly and assembly procedures for the travel motor of a 336E LN excavator. The disassembly procedure involves 27 steps to remove components such as the head, springs, brake piston, plates, and seals. The assembly procedure reverses the disassembly steps and includes lubricating components before installation and ensuring proper alignment of parts. Tools such as an eyebolt, retaining ring pliers, and bearing puller are required to complete the procedures.
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e ln excavator (prefix tmz) service repair manual (tmz000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor in a specific order. The assembly procedure instructs assembling the travel motor in the reverse order, noting proper lubrication and torque specifications for reinstallation. Tools required are also listed.
Caterpillar cat 336 e l excavator (prefix tmz) service repair manual (tmz0000...fjsekdmmeed
This document provides instructions for disassembling and assembling a 336E LN excavator travel motor. The disassembly procedure involves removing 27 parts from the travel motor housing including the head, springs, brake piston, plates, and seals. The assembly procedure instructs installing these 27 parts in reverse order and provides notes to ensure proper installation of parts like pistons, seals, and bearing races. Tools required include an adapter, nuts, washers, eyebolt, retaining ring pliers, bearing puller, and Loctite.
Similar to Caterpillar Cat 336E L Excavator (Prefix TEG) Service Repair Manual (TEG00001 and up).pdf (7)
Caterpillar Cat 330D L Excavator (Prefix B6H) Service Repair Manual (B6H00001...f8uesjdkdmdm
The document provides instructions for installing a hydraulic lockout control on an excavator. It describes:
1) Installing the hydraulic lockout control using bolts and securing a switch.
2) Installing a panel and screws to cover the components.
3) The document contains detailed step-by-step instructions and illustrations for assembling and disassembling various components of an excavator such as a piston motor and fan. Safety warnings are provided throughout.
This document provides assembly instructions for repairing the transmission of a 329DL excavator. It consists of 52 steps to assemble the transmission components in the correct order, including installing gaskets, bearings, pistons, seals, covers, and other parts into the pump housing. Precautions are provided for steps involving spring tension. Required tools include a transmission repair stand, link brackets, driver group, seal guide, and retaining ring pliers.
This document provides instructions for disassembling and assembling the recoil spring on a 329D L excavator. It describes:
1. The required tools and sockets for disassembly and assembly.
2. The disassembly procedure which involves using a special recoil spring bench tool to safely compress the spring and remove components.
3. The assembly procedure which again uses the bench tool to compress the spring and measure its length during assembly. Proper spring length is critical.
This document provides repair instructions for a 329DL excavator transmission. It outlines 38 steps to disassemble and reassemble the transmission, including instructions to clean parts, replace seals and O-rings, measure bearing clearance using shims, and install various transmission components like gears, seals, and housing pieces. Special tools are required for tasks like installing duo-cone seals and bearing surfaces must be coated with anti-seize compound before assembly.
This document provides assembly instructions for a service repair manual in 3 sentences:
It outlines 53 steps to assemble an excavator pump, including installing various components like gaskets, bearings, pistons, seals and covers onto the pump housing in the proper order and orientation. Precautions are noted for installing springs and other parts that could cause injury. Required tools are listed and each assembly step includes an illustration for reference.
Caterpillar Cat 329D2 and 329D2L Excavator (Prefix THW) Service Repair Manual...f8uesjdkdmdm
The document provides instructions for removing and installing a flywheel on a C7.1 engine. It describes:
1) Removing the bolts and electric starting motor to access the flywheel.
2) Installing guide studs and using lifting equipment to remove the flywheel.
3) Inspecting the flywheel and removing the ring gear if needed.
4) Cleaning and preparing the surfaces, then installing the flywheel using lifting equipment and guide studs, and tightening the bolts to the specified torque.
Caterpillar Cat 329D2 and 329D2L Excavator (Prefix RGA) Service Repair Manual...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a swing motor and swing drive. Key steps include:
1. Cleaning all parts thoroughly before assembly and applying a light film of hydraulic oil.
2. Using retaining ring pliers to install a retaining ring and assembling plates, pistons, springs, and valves in the proper sequence.
3. Lifting the swing motor or drive using lifting brackets and removing bolts to separate the components.
Caterpillar Cat 326D2 L Excavator (Prefix KER) Service Repair Manual (KER0000...f8uesjdkdmdm
This document provides the disassembly procedure for a travel motor in 27 steps. It begins by cleaning the outside of the travel motor and fastening it vertically. The first steps include removing the head and various internal components like seals, springs, plates, and pistons. Later steps dismantle the rotating assembly, remove bearings from the shaft, and disassemble the barrel assembly. Throughout, care is taken to mark components for reinstallation in their original positions. Required tools are also listed.
Caterpillar Cat 329D L Excavator (Prefix DTZ) Service Repair Manual (DTZ00001...f8uesjdkdmdm
The document provides instructions for removing and installing the valve mechanism cover base and cylinder head on a Caterpillar 329D excavator powered by a C7 engine. Key steps include:
1. Removing bolts and disconnecting harness assemblies to remove the valve mechanism cover base.
2. Draining coolant, removing supports and clamps, and disconnecting tubes and hoses to remove the cylinder head.
3. Installing a new gasket and torquing bolts to specified values to install the cylinder head. Reconnecting all tubes, hoses and harness assemblies.
1. The document provides instructions for removing and installing the valve mechanism cover base and cylinder head on a Caterpillar 329D excavator powered by a C7 engine.
2. The removal procedure includes disconnecting harness assemblies, removing bolts, and draining coolant from the cooling system.
3. The installation procedure specifies applying anti-seize compound to bolts and tightening them in a numerical sequence to the specified torques. Connecting harness assemblies and installing supports are also described.
Caterpillar Cat 326D2 L (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 326D2 excavator. It lists the required tools and gives step-by-step procedures to remove and install various components of the travel motor such as the head, bearings, brake piston, seals, and housing covers. Special care must be taken when handling springs or installing seals to avoid injury. All components must be cleaned thoroughly before assembly and lubricated with oil during reassembly.
This document provides instructions for disassembling a travel motor. It begins by having the technician clean and secure the travel motor vertically. They are instructed to mark the head and body for alignment during reassembly. Over 25 steps are then outlined to remove various components of the travel motor like the head, brake piston, plates, and barrel assembly. Throughout, technicians are warned to be careful not to damage parts and ensure components are reinstalled in their original positions.
The document provides the disassembly procedure for a travel motor in 27 steps. It begins by removing the travel motor and cleaning it. Key steps include removing the head, brake piston, friction plates, and rotating assembly. The rotating assembly contains a shaft that requires removing retaining rings and bearing races using various tools. Piston assemblies are also removed from the barrel assembly after marking their positions.
Caterpillar Cat 325D L EXCAVATOR (Prefix T2S) Service Repair Manual (T2S00001...f8uesjdkdmdm
The document provides instructions to disassemble a final drive for a 325D L excavator. Key steps include:
1. Cleaning and marking the final drive assembly.
2. Removing the cover and gears using various tools.
3. Taking apart the carrier assemblies by removing pins, washers, and gears.
4. Using presses and hammers to separate additional components from the housing.
Caterpillar Cat 326D2 (Prefix KGY) Service Repair Manual (KGY00001 and up).pdff8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 326D2 and 326D2 L excavator models. The disassembly procedure involves removing 28 different components of the travel motor including the head, port plate, bearings, brake piston, plates, seals and housing cover. Corresponding assembly instructions are also provided, specifying the use of various tools and noting that all seals and gaskets must be replaced. Cleanliness is emphasized throughout the assembly process.
The document provides step-by-step instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed individually using an assortment of tools. Detailed illustrations accompany each step to show how to properly disassemble the final drive. Cleanliness is emphasized to prevent dirt from entering the mechanism during reassembly.
Caterpillar Cat 325D L Excavator (Prefix SCR) Service Repair Manual (SCR00001...f8uesjdkdmdm
The document provides instructions for removing and installing a lifter group on a Caterpillar C7 engine. It describes disconnecting related components like the rocker arms and pushrods. It then instructs removing bolts and side covers to access the lifter arms and shaft. Identification marks should be made on each lifter before removal to ensure proper reinstallation.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual (NAC00001...f8uesjdkdmdm
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Caterpillar Cat 325D L Excavator (Prefix LAL) Service Repair Manual (LAL00001...f8uesjdkdmdm
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists the required tools and gives step-by-step instructions to disassemble the various components of the travel motor. Some key steps include removing the head from the motor body, extracting the brake piston, removing plates and discs, and taking apart the rotating assembly. Proper cleaning and replacement of seals is emphasized for reassembly.
Caterpillar Cat 325D L Excavator (Prefix MCL) Service Repair Manual (MCL00001...f8uesjdkdmdm
The document provides instructions to disassemble a final drive assembly in 3 steps:
1) Fasten the final drive assembly to a repair stand and remove the cover by taking out bolts and setscrews.
2) Remove additional components from the cover including a gear, check plate, and seals.
3) Clean all components thoroughly before disassembly to prevent dirt from entering during reassembly.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR TEG
Configuration: 336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03863290
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 by 250 mm (10 inch) Threaded Rod 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor.
1. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
1/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 2. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00887295
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
3. Remove bolts (1).
4. Remove head (2) from the body of the travel motor.
2/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00887302
5. Remove O-ring seal (3), port plate (4), and bearing (5).
Illustration 3 g00887311
6. Remove O-ring seals (6). Remove springs (7).
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B).
3/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 7. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
8. Remove seal (9) and backup ring (10) from the brake piston.
9. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
10. Remove plates (13) and friction discs (14).
4/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g02107957
Illustration 9 g00887405
Illustration 10 g00887424
11. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
12. Remove Tooling (C) from shaft (15).
13. Remove shaft (15) from rotating assembly (16).
Illustration 11 g00887426
5/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Use Tooling (D) in order to remove retaining ring (17) from shaft (15).
Illustration 12 g00887445
15. Use a suitable press in order to remove bearing race (18) from shaft (15).
Illustration 13 g00887463
16. Rotate shaft (15). Use a suitable press and tooling (E) in order to remove bearing race (19)
from shaft (15).
Illustration 14 g00887501
17. Remove cam plate (20) from barrel assembly (21).
6/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 15 g00887520
18. Remove piston assemblies and retainer plate (22) from barrel assembly (21).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g00887558
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
19. Remove ball (23) and springs (24).
7/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 17 g02107975
20. Remove bearing (25).
21. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
22. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27).
23. Remove lip seal (28).
Illustration 19 g00887619
24. Remove bolts (29) and cover (30).
8/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 20 g00887729
25. Remove seal (31) and backup ring (32).
Illustration 21 g00887754
26. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
27. Remove O-ring seal (35) from the housing of the travel motor.
9/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR TEG
Configuration: 336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07175112
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
3. Install backup ring (32) and seal (31).
2/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) to install lip seal
(28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) to install retaining ring (27).
Illustration 6 g02107975
7. Rotate the housing.
3/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
4/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21).
Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 11 g00887426
5/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15).
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
6/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 14 g02107957
18. Use Tooling (C) to install rotating assembly (16) into the housing.
Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
7/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing so that the cast mark on brake piston (8) is aligned
with the brake supply passage in the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level to
prevent damage to the O-ring seals.
8/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6).
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5).
Illustration 22 g00887295
9/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By:
a. Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 20:32:00 UTC+0800 2020
10/10
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Eng...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR TEG
Configuration: 336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i07191698
Final Drive and Travel Motor - Remove and Install
SMCS - 4050; 4351
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Refer to Operation and Maintenance Manual, "Final Drive Oil - Change" for the correct
draining and filling procedures.
1/5
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g02108761
2. Remove bolts (1) and cover (2).
3. Separate the track.
Illustration 2 g02108762
4. Disconnect hose assemblies (3) ( 4), and (6). Remove fitting (5).
2/5
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 3 g02108781
5. Attach Tooling (A) and a suitable lifting device to final drive and travel motor (7). The
weight of final drive and travel motor (7) is approximately 860 kg (1896 lb). Put a slight
lifting tension on final drive and travel motor (7).
Illustration 4 g02108790
Note: Mark the orientation of the final drive and travel motor assembly for installation
purposes.
6. Remove bolts (8).
Illustration 5 g02108791
7. Use two bolts (8) to remove final drive and travel motor (7).
8. Carefully remove final drive and travel motor (7).
9. Remove bolts (8) from the frame.
3/5
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 6 g02108793
10. Remove bolts (9), counterbalance valve (10), and the O-ring seals.
Illustration 7 g02108794
11. Attach Tooling (B) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 84 kg (185 lb).
12. Remove four bolts (12) and travel motor (11) from final drive (13).
4/5
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 8 g02108914
13. Remove coupling (14).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 1U-9200 Lever Puller Hoist 1
B 439-3938 Link Bracket 1
C - Loctite C5A Copper Anti-Seize -
1. Before assembly remove all compounds, oil, and dust.
2. Install final drive and travel motor (7) in the reverse order of removal.
a. Tighten bolts (9) to a torque of 80 ± 8 N·m (60 ± 6 lb ft).
b. Apply Tooling (C) to the threads of bolt (8).
c. Tighten bolts (8) to a torque of 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional
angle of 45 ± 5 degrees. Refer to Service Magazine, M0083843, "An Improved Bolt
Tightening Procedure for the Critical Joints Is Now Used on All Excavators" for more
detail information.
d. Tighten hose assembly (3) to a torque of 160 ± 16 N·m (120 ± 12 lb ft).
e. Tighten bolts (1) to a torque of 130 ± 10 N·m (95 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jul 20 20:32:56 UTC+0800 2020
5/5
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336E L EXCAVATOR TEG
Configuration: 336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine
Disassembly and Assembly
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Media Number -KENR8157-05 Publication Date -01/06/2014 Date Updated -12/06/2014
i03885522
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Brackets 3
B 154-6183 Forcing Bolts 3
C 138-7576 Link Brackets 3
Start By:
a. Remove the final drive and the travel motor.
Illustration 1 g02131413
1/8
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. 1. Attach Tooling (A) and a suitable lifting device to cover (2). The weight of cover (2) is
approximately 20 kg (45 lb). Remove bolts (1) and cover (2).
Illustration 2 g02131414
2. Remove plate (3) from cover (2).
Illustration 3 g02131415
3. Remove sun gear (4), spacer (5), and planetary gear assembly (6).
2/8
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 4 g02131875
4. Remove retaining ring (7), washer (8), planetary gear (9), roller bearing (11), and washer
(12) from carrier assembly (13).
5. Remove retaining ring (10) and sun gear (14) from carrier assembly (13).
Illustration 5 g02131876
6. Remove spacer (16).
7. Attach Tooling (A) and a suitable lifting device to planetary gear assembly (15). The weight
of planetary gear assembly (15) is approximately 32 kg (70 lb). Remove planetary gear
assembly (15).
3/8
336E & 336E L Excavators TEG00001-UP (MACHINE) POWERED BY C9.3 Engine...
2020/7/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...