The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D2 GC excavator. The procedures include:
1. Removing various components of the piston pump including bearings, seals, springs and pistons.
2. Assembling the components in reverse order, ensuring proper cleaning and installation of seals and bearings.
3. Checking clearances and installing shims as needed during assembly.
4. Reinstalling the assembled piston pump and making hydraulic connections.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for an excavator model 336D2 GC. The procedures include:
1. Removing the piston motor from the fan assembly by bending locking tabs and removing bolts and hub.
2. Disassembling the piston motor by removing seals, bearings, springs and other internal components.
3. Reassembling the piston motor by reversing the disassembly steps and precautions are provided for spring loaded components.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 336D2 GC excavator. It describes 30 steps to disassemble the pump, removing components like the head, seals, bearings, pistons, and housing. It also describes 25 steps to reassemble the pump and install all components in the reverse order. Safety warnings are provided to prevent injury from spring loaded parts.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for an excavator model 336D2 GC. The procedures include:
1. Removing the existing piston motor by bending locking tabs, removing bolts and hub, and lifting the motor assembly off.
2. Disassembling the piston motor by using tools to remove bearings, seals, springs and other internal components.
3. Reassembling the piston motor by reversing the disassembly steps and precisely installing each part in the correct order while following safety precautions.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and using tools and procedures to carefully install components like bearings, seals, springs, pins and plates in the correct order and orientation. Torques and end play are checked during assembly to ensure proper installation.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...ikdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for an excavator model 336D2 GC. The procedures include:
1. Removing the piston motor from the fan assembly by bending locking tabs and removing bolts and hub.
2. Disassembling the piston motor by removing seals, bearings, springs and other internal components.
3. Reassembling the piston motor by reversing the disassembly steps and precautions are provided for spring loaded components.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 336D2 GC excavator. It describes 30 steps to disassemble the pump, removing components like the head, seals, bearings, pistons, and housing. It also describes 25 steps to reassemble the pump and install all components in the reverse order. Safety warnings are provided to prevent injury from spring loaded parts.
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) for an excavator model 336D2 GC. The procedures include:
1. Removing the existing piston motor by bending locking tabs, removing bolts and hub, and lifting the motor assembly off.
2. Disassembling the piston motor by using tools to remove bearings, seals, springs and other internal components.
3. Reassembling the piston motor by reversing the disassembly steps and precisely installing each part in the correct order while following safety precautions.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and using tools and procedures to carefully install components like bearings, seals, springs, pins and plates in the correct order and orientation. Torques and end play are checked during assembly to ensure proper installation.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f8uejkkdmdm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...ikdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...ufjksemd8ujd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...km7seydwuhdw
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...jdkskmdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, installing these components in reverse order while taking precautions for spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...prmy389342
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...dueikdkmem
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and swashplate. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fjskekxcddmmme
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves using tools to remove components like bearings, seals, pistons and springs. The assembly process specifies 30 steps to reinstall these components in the proper order and includes ensuring correct shimming and end play. Precautions are provided to wear protective equipment when working with pressurized or spring-loaded parts.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...cdfzxs
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It describes removing parts like the head, seals, bearings, pistons, and shaft. Cleanliness is important during disassembly and assembly. Various tools are required like retaining ring pliers and a bearing puller. The instructions specify installing parts in the reverse order of removal and refer to other sections for removing components like the fan prior to accessing the piston pump.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fksjksmmde
The document provides instructions for disassembling and assembling a piston pump. Key steps include:
1. Removing various components like the head, O-rings, pistons, and bearings.
2. Using tools like retaining ring pliers and a driver group to remove springs and retaining rings.
3. Taking safety precautions as parts are under spring tension.
4. Cleaning all parts thoroughly before assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings and bearings. The assembly begins by cleaning all parts and proceeds through 30 steps reinstalling components like pistons, springs, seals and housings. Proper cleaning and use of recommended tools is emphasized to safely release spring forces during disassembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring tension. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings and bearings. The assembly begins by cleaning all parts and proceeds through 30 steps reinstalling components like pistons, springs, seals and housings. Proper cleaning and use of recommended tools is emphasized to safely release spring forces during disassembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring pressure. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove the retaining rings, seals, bearings, pistons and other components. The assembly begins by cleaning all parts and proceeds step-by-step to reinstall the components in reverse order, taking care with spring-loaded parts. Precise positioning and measurement of clearances is required during assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring pressure. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Caterpillar Cat 330C FM EXCAVATOR (Prefix B4N) Service Repair Manual Instant ...yan77xunhao
This document provides instructions for servicing components of a Caterpillar 330C FM Excavator engine, including:
- Installing the cylinder head, which involves positioning a new gasket, attaching lifting tools to the cylinder head, applying anti-seize compound to bolts, and tightening bolts in a specific sequence.
- Removing and installing the camshaft, which requires removing other components like the rocker arm first, ensuring timing marks are aligned, and lubricating the camshaft lobes during installation.
- Removing and installing the camshaft gear by pressing it off the camshaft, aligning the keyway, and heating the gear to the proper temperature during installation.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
More Related Content
Similar to Caterpillar Cat 336D2 GC Excavator (Prefix NBN) Service Repair Manual Instant Download.pdf
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...8ufjsekddm8u
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...ufjksemd8ujd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...km7seydwuhdw
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings, seals, bearings, pistons and other components. The assembly process specifies cleaning parts and provides 30 steps for installing components in the correct order and ensuring proper operation, including adjusting end play and installing springs and seals.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual Instant D...fskekkdmdmdm3e
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...jdkskmdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then lists 27 steps to reassemble the pump, installing these components in reverse order while taking precautions for spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...prmy389342
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and shaft. It then describes 28 steps to reassemble the pump by installing these components in the reverse order, taking precautions for any spring-loaded parts. The instructions specify using the proper tools and cleaning procedures.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...dueikdkmem
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It outlines 30 steps to disassemble the pump, removing components like the head, port plate, bearings, pistons, and swashplate. It then lists 27 steps to reassemble the pump, replacing components in the reverse order and taking precautions around spring-loaded parts. The instructions specify using the proper tools and cleaning parts thoroughly during assembly.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fjskekxcddmmme
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves using tools to remove components like bearings, seals, pistons and springs. The assembly process specifies 30 steps to reinstall these components in the proper order and includes ensuring correct shimming and end play. Precautions are provided to wear protective equipment when working with pressurized or spring-loaded parts.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...cdfzxs
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. It describes removing parts like the head, seals, bearings, pistons, and shaft. Cleanliness is important during disassembly and assembly. Various tools are required like retaining ring pliers and a bearing puller. The instructions specify installing parts in the reverse order of removal and refer to other sections for removing components like the fan prior to accessing the piston pump.
Caterpillar cat 336 d l excavator (prefix mds) service repair manual (mds0000...fksjksmmde
The document provides instructions for disassembling and assembling a piston pump. Key steps include:
1. Removing various components like the head, O-rings, pistons, and bearings.
2. Using tools like retaining ring pliers and a driver group to remove springs and retaining rings.
3. Taking safety precautions as parts are under spring tension.
4. Cleaning all parts thoroughly before assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...fijsekkdmdm2w
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings and bearings. The assembly begins by cleaning all parts and proceeds through 30 steps reinstalling components like pistons, springs, seals and housings. Proper cleaning and use of recommended tools is emphasized to safely release spring forces during disassembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring tension. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f8sejdkdmdijd
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove retaining rings and bearings. The assembly begins by cleaning all parts and proceeds through 30 steps reinstalling components like pistons, springs, seals and housings. Proper cleaning and use of recommended tools is emphasized to safely release spring forces during disassembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...fujkskemdmdm4r
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring pressure. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual Instant D...ze3xiandiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on a Caterpillar 336D L excavator. The disassembly process involves using tools to remove the retaining rings, seals, bearings, pistons and other components. The assembly begins by cleaning all parts and proceeds step-by-step to reinstall the components in reverse order, taking care with spring-loaded parts. Precise positioning and measurement of clearances is required during assembly.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...f7usuejkdkddm3
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) on an excavator. The disassembly process involves removing 30 individual parts in 11 steps, taking care with any parts under spring pressure. The assembly follows the reverse of disassembly and involves positioning and installing 30 parts in 28 steps, ensuring proper bearing end play and sealing.
Similar to Caterpillar Cat 336D2 GC Excavator (Prefix NBN) Service Repair Manual Instant Download.pdf (20)
Caterpillar Cat 330C FM EXCAVATOR (Prefix B4N) Service Repair Manual Instant ...yan77xunhao
This document provides instructions for servicing components of a Caterpillar 330C FM Excavator engine, including:
- Installing the cylinder head, which involves positioning a new gasket, attaching lifting tools to the cylinder head, applying anti-seize compound to bolts, and tightening bolts in a specific sequence.
- Removing and installing the camshaft, which requires removing other components like the rocker arm first, ensuring timing marks are aligned, and lubricating the camshaft lobes during installation.
- Removing and installing the camshaft gear by pressing it off the camshaft, aligning the keyway, and heating the gear to the proper temperature during installation.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
CASE CX700 CRAWLER EXCAVATOR Service Repair Manual Instant Download.pdfyan77xunhao
CASE/AKCELA hydraulic fluid is recommended for use in the hydraulic system. The specific fluid to use depends on the ambient temperature range. For temperate climates from -20°C to +40°C, use CASE/AKCELA HYDRAULIC EXCAVATOR FLUID. For hot climates from 0°C to +50°C, use CASE/AKCELA AW HYDRAULIC FLUID 68 HV.
This document provides assembly instructions for a transmission in a 434E backhoe loader. It lists required tools and gives step-by-step instructions for assembling major transmission components like gears, shafts, bearings, springs and seals. Proper cleaning and lubrication of parts is emphasized. Safety notes warn of risks from improper handling of spring-loaded components.
The document provides instructions for removing and installing the boom on a 420F Backhoe Loader. It describes:
1) Disconnecting hoses and removing pins/bolts to separate the boom from the loader.
2) Using pullers and lifting devices to remove bearings and the boom cylinder.
3) Reversing the process to install the new or repaired boom by pressing in bearings and reattaching components.
This document provides instructions for removing and installing fuel injection nozzles on a Caterpillar 3054 engine. It describes:
- Removing fuel injection lines before removing nozzles
- Loosening the threaded nut and removing the nozzle and seat washer from the cylinder block
- Cleaning parts and installing a new seat washer before installing the nozzle
- Carefully tightening the nut to the specified torque
Caterpillar Cat 345B Series II Excavator (Prefix CCC) Service Repair Manual I...yan77xunhao
The document provides instructions for removing and installing the rocker shaft, pushrods, cylinder head, and related components on a 345B Series II Excavator with a 3176C engine. The removal procedure involves disconnecting sensors, tubes, and wiring before removing bolts and lifting off the cylinder head. The installation procedure specifies cleaning mating surfaces, installing new gaskets and seals, and using guide bolts to position the cylinder head before reconnecting components.
This document provides instructions for removing the cylinder head from a Caterpillar 3054C engine. The steps include:
1. Draining the coolant and engine oil from the engine oil cooler.
2. Removing the air filter hose.
3. Removing any attached components to the cylinder head like the valve cover, rocker arms, pushrods, etc.
4. Removing the cylinder head bolts and removing the cylinder head.
The document provides instructions for disassembling and assembling components of the control valve for an excavator model 385B. It describes 25 steps to disassemble parts like actuators, manifolds, solenoids, valves, seals and more. The assembly section outlines 14 steps and provides warnings to properly install spring-loaded parts to prevent injury. Precautions are noted to clean parts and check for wear before reassembly.
Caterpillar Cat 385C and 385C L Excavator (Prefix JCM) Service Repair Manual ...yan77xunhao
This document provides instructions for disassembling and assembling the final drive of a 385C excavator. It lists 34 steps for disassembly, removing components like housing covers, gears, shafts and seals. It notes the importance of cleanliness. For assembly, it lists 1 step to reassemble the final drive on a repair stand and cribbing, referring to other assembly instructions. Tools, torque specs and notes on lubrication and seals are provided. The goal is to disassemble, clean, inspect for wear, replace worn parts, and reassemble the final drive while maintaining cleanliness.
This document provides instructions for disassembling and assembling the final drive of a 385B excavator. It describes:
1) Removing over 30 components of the final drive including gears, shafts, housings and seals using various tools.
2) Cleaning and inspecting parts prior to assembly.
3) Assembling the components in reverse order, applying lubricants to bearings and sealing surfaces.
4) Using tools and procedures to properly set bearing preload when installing the main housing.
Caterpillar Cat 385B and 385B L Excavator (Prefix FDL) Service Repair Manual ...yan77xunhao
This document provides instructions for disassembling and assembling the final drive of an excavator model 385B.
The disassembly procedure involves removing 27 parts in a specific sequence, including removing the ring gear, carrier assemblies, gears, shafts and seals. The assembly procedure instructs installing 31 parts in reverse order, and describes determining the correct shim thickness between the bearing cone and coupling gear to achieve proper bearing preload. Special tools are required for several steps.
Caterpillar Cat 374F L Excavator (Prefix AP4) Service Repair Manual Instant D...yan77xunhao
This document provides instructions for disassembling and assembling the final drive of a 374F L Excavator. It lists the required tools and parts. The disassembly process involves removing components like the final drive cover, ring gear, carrier assemblies, gears, shafts and housings. The assembly process specifies cleaning parts, applying sealant, installing bearings and seals, and adjusting bearing preload using shims. Precautions are given for using hydraulic cylinders and puller studs during the assembly process.
This document provides instructions for disassembling and assembling the governor and fuel injection pump housing of a 3306 vehicular engine. It describes removing over 30 individual parts in 12 steps to disassemble the governor. It then describes assembling the governor in 35 steps, noting to clean and oil all parts before assembly.
This document provides instructions for removing and installing various engine components on a Caterpillar 3054C engine, including:
- Lifter group
- Camshaft
- Camshaft bearings
- Engine oil pan
- Piston cooling jets
The instructions include lists of required tools, step-by-step procedures, torque specifications, and cautions to keep parts clean and properly support components.
The document provides instructions for removing and disassembling the transmission of a 428D Backhoe Loader. It describes 19 steps to disassemble the transmission into its major components which include removing valve groups, filters, shafts, seals and gaskets. Special tools are required and cleanliness is important when disassembling the transmission.
The document provides instructions for removing the bank valve from a 420E Backhoe Loader. It is a 19 step process that involves draining fluids, removing floor plates, disconnecting hoses and wiring, and using lifting equipment to remove the heavy bank valve unit. The bank valve is then disassembled into its individual valve components for inspection or replacement.
The document provides instructions for installing a swing frame on a 420E backhoe loader. It outlines 20 steps for the installation, which include lowering bearing temperatures, placing bars through frames, installing pins and bolts, connecting hoses and harnesses, and positioning cylinders. Tools required include levers, drivers, and lifting devices. Safety precautions are provided for working on pressurized hydraulic systems.
The document provides instructions to disassemble an axle housing, axle shaft, and wheel flange from a 420E backhoe loader. It outlines 9 steps to remove components including the axle shaft, retaining rings, locking plates, seals, bearings and bushings. Tools required include a spanner wrench, retaining ring pliers, and a combination puller. The purpose is to disassemble these components for repair or replacement.
The document provides instructions for removing and installing components related to the steering and final drive system of a Caterpillar 420E backhoe loader, including:
- Removing and installing the front tire and rim.
- Removing and installing the tie rod and steering cylinder.
- Removing the final drive planetary by draining oil and removing mounting screws.
- Disassembling the final drive planetary by using retaining ring pliers to remove the retaining ring.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 GC EXCAVATOR NBN
Configuration: 336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02732015
Piston Pump (Hydraulic Fan) - Assemble
SMCS - 1387-016-QP; 5070-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1857 Retaining Ring Pliers 1
D 8T-5096 Dial Indicator Gp 1
Illustration 1 g01212915
1. Lower the temperature of bearing cup (49). Install bearing cup (49).
1/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 2 g01212913
2. Install lip seal (48).
3. Use Tooling (B) in order to install retaining ring (47).
Illustration 3 g01213404
4. Raise the temperature of bearing cone (46).
5. Install bearing cone (46) onto shaft (45).
Illustration 4 g01213405
6. Install bearing cone (46), shaft (45), and bearing cone (31).
2/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 5 g01213407
7. Lower the temperature of bearing cone (26). Install bearing cone (26).
Illustration 6 g01212900
8. Position head (23) onto the housing.
9. Install bolts (22).
Illustration 7 g01213409
10. Use Tooling (D) in order to determine the end play of shaft (45).
3/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Illustration 11 g01212910
14. Install swashplate (43).
Illustration 12 g01373818
15. Install shim (40), spring (41), and shim (42) to barrel (38).
Illustration 13 g01212908
5/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
16. Use Tooling (A), Tooling (B), and a suitable press in order to install retaining ring (39) into
barrel (38).
Illustration 14 g01212907
17. Install pins (37) into barrel (38).
Illustration 15 g01212906
18. Install bearing (36), retainer (35), and pistons (34).
6/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Illustration 16 g01212905
19. Install rotating group (32) and shim (33).
Note: Shim thickness was determined on Step 9.
Illustration 17 g01212904
20. Install bearing cone (31).
Illustration 18 g01212903
21. Install piston (30).
7/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 19 g01212902
22. Install spring (27), piston (29), and O-ring seal (28).
Illustration 20 g01213436
23. Install O-ring seals (24) and port plate (25).
Illustration 21 g01212900
8/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
24. Install head (23) and bolts (22).
Illustration 22 g01212898
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
25. Install spool (15), poppet (16), spring (17), spring (18), shim (19), O-ring seal (20), and
housing (21) into housing (2).
26. Install retainer (7), spring (8), retainer (9), spool (10), O-ring seal (12), backup ring (11), O-
ring seal (13), and cartridge (14).
27. Install screw (6) into housing (2).
9/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. a. Install the piston pump. Refer to Disassembly and Assembly, "Piston Pump (Hydraulic Fan)
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 7 23:47:09 UTC+0800 2020
11/11
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SE...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 GC EXCAVATOR NBN
Configuration: 336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02424411
Piston Pump (Hydraulic Fan) - Install
SMCS - 1387-012-QP; 5070-012-HFN
Installation Procedure
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01211400
1. Position piston pump (7) and install bolts (6).
2. Connect harness assembly (5).
3. Connect hose assemblies (3) and (4).
1/2
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 2 g01211399
4. Connect hose assembly (2).
Illustration 3 g01206719
5. Close door (1).
6. Fill the hydraulic system with oil. Refer to Operation and Maintenance Manual, "Refill
Capacities".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 7 23:48:04 UTC+0800 2020
2/2
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 GC EXCAVATOR NBN
Configuration: 336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415451
Piston Motor (Hydraulic Fan) - Remove
SMCS - 1386-011-QP; 5058-011-FM
Removal Procedure
Start By:
a. Remove the fan. Refer to Disassembly and Assembly, "Fan - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01207415
1. Bend locking tabs (1) backward.
2. Remove bolts (2) and hub (3).
1/2
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 2 g01207416
3. Use a suitable lifting device to position fan motor assembly (4) onto suitable cribbing. The
weight of fan motor assembly (4) is approximately 68 kg (150 lb).
Illustration 3 g01207418
4. Attach a suitable lifting device to piston motor (5). The weight of piston motor (5) is
approximately 23 kg (50 lb).
5. Remove bolts (6) and fan motor (5).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Aug 7 23:49:00 UTC+0800 2020
2/2
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 GC EXCAVATOR NBN
Configuration: 336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415272
Piston Motor (Hydraulic Fan) - Disassemble
SMCS - 1386-015-QP; 5058-015-FM; 5058-015-HFN
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9S-9152 Bearing Puller Gp 1
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Start By:
a. Remove the piston motor. Refer to Disassembly and Assembly, "Piston Motor (Hydraulic
Fan) - Remove".
1/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. Illustration 1 g01207275
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove bolts (1) and head (2).
Illustration 2 g01207276
2. Remove O-ring seal (3), port plate (4), and bearing cup (5).
Illustration 3 g01207278
2/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Remove plug (6), sleeve (7), poppet (8), spring (9), poppet (10), and O-ring seal (11).
Illustration 4 g01207279
4. Remove bearing cone (12).
Illustration 5 g01207280
5. Remove shim (13) and rotating group (14).
3/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 9 g01207284
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
9. Use Tooling (C) and Tooling (B) in order to remove retaining ring (19).
10. Remove shim (23), spring (22), and shim (21).
Illustration 10 g01207285
11. Remove swashplate (24) and shaft (25).
5/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 11 g01207287
12. Use Tooling (A) in order to remove bearing cone (26) from shaft (25).
Illustration 12 g01207286
13. Use Tooling (C) in order to remove retaining ring (27).
14. Remove lip seal (28).
Illustration 13 g01207288
15. Remove bearing cup (29).
6/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 GC EXCAVATOR NBN
Configuration: 336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02415273
Piston Motor (Hydraulic Fan) - Assemble
SMCS - 1386-016-QP; 5058-016-FM; 5058-016-HFN
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 1P-1861 Retaining Ring Pliers 1
C 1P-0510 Driver Gp 1
Illustration 1 g01207288
1. Install bearing cup (29).
1/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 2 g01207286
2. Install lip seal (28).
3. Use Tooling (C) in order to install retaining ring (27).
Illustration 3 g01207624
4. Raise the temperature of bearing cone (26).
5. Install bearing cone (26) onto shaft (25).
Illustration 4 g01207285
6. Install shaft (25) and swashplate (24).
2/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Illustration 5 g01207283
Illustration 6 g01207284
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
7. Install shim (21), spring (22), and shim (23).
8. Use Tooling (C) and Tooling (B) in order to install retaining ring (19).
3/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. Illustration 10 g01207279
13. Install bearing cone (12).
Illustration 11 g01207278
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
14. Install O-ring seal (11), poppet (10), spring (9), poppet (8), sleeve (7), and plug (6).
5/7
336D2 GC Excavator NBN00001-UP (MACHINE) POWERED BY C9 Engine(SEBP...
2020/8/7
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...