This document provides instructions for installing a final drive and travel motor on an excavator. It outlines 11 steps, including positioning the travel motor and final drive with lifting devices, installing O-rings and seals, connecting hoses and fittings, and tightening bolts to specified torques. Safety notices are provided to handle fluids properly and keep components clean from contaminants. Required tools include vacuum caps, link brackets, and anti-seize compound.
The document provides instructions for installing a swivel on an excavator. It includes:
- Attaching lifting equipment to the swivel which weighs 45 kg.
- Installing bolts and a retainer to mount the swivel.
- Connecting hydraulic hoses and fittings.
- Installing covers and bolts to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix far) service repair manual (far000...fjjskekdmmem
The document provides instructions for assembling and installing a swivel on an excavator. It lists the required tools which include link brackets and vacuum caps. The assembly procedure instructs to clean parts thoroughly before assembly. Parts are to be positioned and bolted together in the correct order. O-rings and seals are installed in their proper locations. Once assembled, the swivel is installed on the excavator using lifting devices and bolted into place. Hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix far) service repair manual (far000...pfiskdmjekm
The document provides instructions for assembling and installing a swivel on an excavator. It lists the required tools which include link brackets and vacuum caps. The procedure involves cleaning parts, positioning the swivel using lifting devices, installing O-rings and seals, attaching hoses and fittings, and tightening bolts to specified torques. Proper cleanliness is emphasized to prevent contamination which can cause premature wear.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fijsekkdmdm2w
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are then used to secure the housing and rotor. Finally, the swivel is tested for leaks by applying air pressure before being fully installed on the excavator.
The documents provide instructions for assembling and disassembling a swivel component of an excavator. Key steps include:
1. Cleaning all parts thoroughly before assembly to prevent contamination.
2. Using lifting devices and tools to position housing and rotor components of the swivel for disassembly and assembly. The housings weigh approximately 20-43 kg.
3. Removing and installing seals, plugs, retainers, covers, and bolts in the described order and using the specified tools to fully disassemble and reassemble the swivel.
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix xbh) service repair manual (xbh000...ikdkdmddm
The documents provide instructions for assembling and disassembling a swivel component of an excavator. Key steps include:
1. Cleaning all parts thoroughly before assembly to prevent contamination.
2. Using lifting devices and tools to position housing and rotor components of the swivel for disassembly and assembly. The housings weigh approximately 20-43 kg.
3. Removing and installing seals, plugs, retainers, covers, and bolts in the described order and using the specified tools to fully disassemble and reassemble the swivel.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
The document provides instructions for installing a swivel on an excavator. It includes:
- Attaching lifting equipment to the swivel which weighs 45 kg.
- Installing bolts and a retainer to mount the swivel.
- Connecting hydraulic hoses and fittings.
- Installing covers and bolts to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix far) service repair manual (far000...fjjskekdmmem
The document provides instructions for assembling and installing a swivel on an excavator. It lists the required tools which include link brackets and vacuum caps. The assembly procedure instructs to clean parts thoroughly before assembly. Parts are to be positioned and bolted together in the correct order. O-rings and seals are installed in their proper locations. Once assembled, the swivel is installed on the excavator using lifting devices and bolted into place. Hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix far) service repair manual (far000...pfiskdmjekm
The document provides instructions for assembling and installing a swivel on an excavator. It lists the required tools which include link brackets and vacuum caps. The procedure involves cleaning parts, positioning the swivel using lifting devices, installing O-rings and seals, attaching hoses and fittings, and tightening bolts to specified torques. Proper cleanliness is emphasized to prevent contamination which can cause premature wear.
Caterpillar Cat 336D2 and 336D2 L Excavator (Prefix XBH) Service Repair Manua...fijsekkdmdm2w
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are then used to secure the housing and rotor. Finally, the swivel is tested for leaks by applying air pressure before being fully installed on the excavator.
The documents provide instructions for assembling and disassembling a swivel component of an excavator. Key steps include:
1. Cleaning all parts thoroughly before assembly to prevent contamination.
2. Using lifting devices and tools to position housing and rotor components of the swivel for disassembly and assembly. The housings weigh approximately 20-43 kg.
3. Removing and installing seals, plugs, retainers, covers, and bolts in the described order and using the specified tools to fully disassemble and reassemble the swivel.
The document provides instructions for installing a swivel on an excavator. It describes using lifting devices and tools to position the swivel. O-rings and seals are installed on the swivel housing and rotor before assembling them together. Bolts are used to secure the parts and the swivel is tested for leaks by applying air pressure. Finally, hoses and fittings are reconnected to complete the installation.
Caterpillar cat 336 d2 l excavator (prefix xbh) service repair manual (xbh000...ikdkdmddm
The documents provide instructions for assembling and disassembling a swivel component of an excavator. Key steps include:
1. Cleaning all parts thoroughly before assembly to prevent contamination.
2. Using lifting devices and tools to position housing and rotor components of the swivel for disassembly and assembly. The housings weigh approximately 20-43 kg.
3. Removing and installing seals, plugs, retainers, covers, and bolts in the described order and using the specified tools to fully disassemble and reassemble the swivel.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. Proper maintenance such as following instructions, using correct tools and parts, cleaning components, and ensuring tight fasteners is important to maximize engine performance and longevity. The document provides an overview of engine operation and maintenance procedures.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design and specifications including power, torque, and idle speeds. Exploded diagrams show the main engine components and assemblies in the DE12, DE12TI, and DE12TIS configurations. General repair instructions are provided to guide proper maintenance techniques.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. The manual includes symbols to indicate maintenance tasks and safety instructions for preventing environmental damage when disposing of waste. It aims to help customers and distributors properly operate and maintain the engines to retain maximum performance over the long term.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdffujskmd9dokk
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, cover, screws, nuts, and other minor parts. The manual provides an exploded diagram of the power unit and an index of the parts to allow technicians to identify replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdffujskmd9dokk
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdffujskmd9dokk
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdffujskmd9dokk
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark EPX 16-20S Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark forklift models TMX12-25 and ECX16-18. It provides instructions on using and arranging the manual, which is divided into standardized groups and sections. The manual outlines safety practices and procedures for maintaining the forklifts, including proper lifting, jacking, and blocking of the vehicles. It emphasizes using qualified personnel and following the manufacturer's recommendations to safely conduct maintenance and repairs.
Clark CMP 70 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides instructions for safely maintaining Clark industrial trucks. It outlines 21 safe maintenance practices, such as raising trucks on blocks before working on them, disconnecting batteries, inspecting brakes and other components regularly, and using lifting equipment of the proper capacity when removing heavy components. Technicians are instructed to follow the manufacturer's recommendations and use genuine or approved replacement parts.
Clark CMP 60 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark Material Handling Company's CMP50/60/70 trucks. It contains safety instructions for maintaining the trucks, including raising them on blocks, disconnecting batteries, and checking for fuel and electrical system issues. The manual is arranged by topic groups and sections for locating specific maintenance and repair procedures.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...fujskmd9dokk
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure clean and contamination-free assembly.
Caterpillar Cat 336F L Excavator (Prefix YFD) Service Repair Manual (YFD00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or releasing parts under spring force.
Caterpillar Cat 336F L Excavator (Prefix DSW) Service Repair Manual (DSW00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety notices advise wearing protective equipment when compressing springs or releasing pressurized components during disassembly.
This document provides instructions for disassembling a piston pump used in Caterpillar articulated trucks. The pump is removed from the machine and various internal components are then dismantled. These components include pressure and flow compensator valves, springs, seals, pistons, barrels and housings. Detailed illustrations accompany each step to show how to access fasteners and position parts for removal or disassembly. Safety notices are also included regarding contained fluids and released spring forces during the process. The overall document provides a technical service manual excerpt on thoroughly disassembling a hydraulic pump assembly.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. Proper maintenance such as following instructions, using correct tools and parts, cleaning components, and ensuring tight fasteners is important to maximize engine performance and longevity. The document provides an overview of engine operation and maintenance procedures.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design and specifications including power, torque, and idle speeds. Exploded diagrams show the main engine components and assemblies in the DE12, DE12TI, and DE12TIS configurations. General repair instructions are provided to guide proper maintenance techniques.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. The manual includes symbols to indicate maintenance tasks and safety instructions for preventing environmental damage when disposing of waste. It aims to help customers and distributors properly operate and maintain the engines to retain maximum performance over the long term.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdffujskmd9dokk
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, cover, screws, nuts, and other minor parts. The manual provides an exploded diagram of the power unit and an index of the parts to allow technicians to identify replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdffujskmd9dokk
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdffujskmd9dokk
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdffujskmd9dokk
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark EPX 16-20S Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark forklift models TMX12-25 and ECX16-18. It provides instructions on using and arranging the manual, which is divided into standardized groups and sections. The manual outlines safety practices and procedures for maintaining the forklifts, including proper lifting, jacking, and blocking of the vehicles. It emphasizes using qualified personnel and following the manufacturer's recommendations to safely conduct maintenance and repairs.
Clark CMP 70 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides instructions for safely maintaining Clark industrial trucks. It outlines 21 safe maintenance practices, such as raising trucks on blocks before working on them, disconnecting batteries, inspecting brakes and other components regularly, and using lifting equipment of the proper capacity when removing heavy components. Technicians are instructed to follow the manufacturer's recommendations and use genuine or approved replacement parts.
Clark CMP 60 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark Material Handling Company's CMP50/60/70 trucks. It contains safety instructions for maintaining the trucks, including raising them on blocks, disconnecting batteries, and checking for fuel and electrical system issues. The manual is arranged by topic groups and sections for locating specific maintenance and repair procedures.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...fujskmd9dokk
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure clean and contamination-free assembly.
Caterpillar Cat 336F L Excavator (Prefix YFD) Service Repair Manual (YFD00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or releasing parts under spring force.
Caterpillar Cat 336F L Excavator (Prefix DSW) Service Repair Manual (DSW00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety notices advise wearing protective equipment when compressing springs or releasing pressurized components during disassembly.
This document provides instructions for disassembling a piston pump used in Caterpillar articulated trucks. The pump is removed from the machine and various internal components are then dismantled. These components include pressure and flow compensator valves, springs, seals, pistons, barrels and housings. Detailed illustrations accompany each step to show how to access fasteners and position parts for removal or disassembly. Safety notices are also included regarding contained fluids and released spring forces during the process. The overall document provides a technical service manual excerpt on thoroughly disassembling a hydraulic pump assembly.
Automotive Engine Valve Manufacturing Plant Project Report.pptxSmith Anderson
The report provides a complete roadmap for setting up an Automotive Engine Valve. It covers a comprehensive market overview to micro-level information such as unit operations involved, raw material requirements, utility requirements, infrastructure requirements, machinery and technology requirements, manpower requirements, packaging requirements, transportation requirements, etc.
Top-Quality AC Service for Mini Cooper Optimal Cooling PerformanceMotor Haus
Ensure your Mini Cooper stays cool and comfortable with our top-quality AC service. Our expert technicians provide comprehensive maintenance, repairs, and performance optimization, guaranteeing reliable cooling and peak efficiency. Trust us for quick, professional service that keeps your Mini Cooper's air conditioning system in top condition, ensuring a pleasant driving experience year-round.
car rentals in nassau bahamas | atv rental nassau bahamasjustinwilson0857
At Dash Auto Sales & Car Rentals, we take pride in providing top-notch automotive services to residents and visitors alike in Nassau, Bahamas. Whether you're looking to purchase a vehicle, rent a car for your vacation, or embark on an exciting ATV adventure, we have you covered with our wide range of options and exceptional customer service.
Website: www.dashrentacarbah.com
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i07188136
Final Drive and Travel Motor - Install
SMCS - 4050-012; 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
5P-0306 Vacuum Transducer 1
FT-1115 Vacuum Cap 1
6V-4142 Fitting 1
5K-5068 Fitting 1
B 1U-9200 Lever Puller Hoist 1
C 439-3938 Link Bracket 1
D - Loctite C5A Copper Anti-Seize -
Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/5
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01181921
1. Attach Tooling (C) and a suitable lifting device to travel motor (11). The weight of travel
motor (11) is approximately 73 kg (160 lb).
2. Position travel motor (11). Install bolts (12) that mount travel motor (11) to final drive (13).
2/5
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g01181917
3. Install O-ring seals (10) and (9).
Illustration 3 g01181914
4. Install counterbalance valve (8) and bolts (7).
Illustration 4 g01181911
3/5
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g01182266
5. Attach Tooling (B) and a suitable lifting device to final drive and travel motor (5). The
weight of final drive and travel motor (5) is approximately 860 kg (1896 lb).
6. Carefully position final drive and travel motor (5). Apply Tooling (D) to the threads of bolts
(6).
7. Tighten bolts (6) in an alternating sequence to a torque of 250 ± 25 N·m (184 ± 18 lb ft).
Turn an additional angle of 45 ± 5 degrees. Refer to Service Magazine , M0083843 , "An
Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on all Excavators"
for more detailed information.
Illustration 6 g01223711
8. Install fitting (4). Connect hose assemblies (3).
4/5
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g00944947
9. Remove Tooling (A). Install the cap onto the hydraulic tank.
10. Fill the hydraulic system. Refer to Operation and Maintenance Manual, "Hydraulic System
Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities
and Refill Capacities".
Illustration 8 g01223707
11. Install cover (2) and bolts (1). Tighten bolts (1) to a torque of 130 ± 10 N·m (96 ± 7 lb ft).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:04:24 UTC+0800 2020
5/5
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434256
Swivel - Remove
SMCS - 5060-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 1 g01209599
1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g01216069
2. Disconnect hose assemblies (1), (2), and (3). Remove support (4).
Illustration 3 g01216082
2/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot
(5).
Illustration 4 g01216099
4. Remove bolts (10) and covers (11).
Illustration 5 g01216098
5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12).
Remove fittings (14). Remove bolts (13). Remove swivel (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:05:20 UTC+0800 2020
3/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02568407
Swivel - Disassemble
SMCS - 5060-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 1. Thoroughly clean the outside of the swivel joint prior to disassembly.
Illustration 1 g00633843
Illustration 2 g00633841
2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to
Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb).
3. Remove bolts (1), washers (2), and cover (3) from outside housing (8).
4. Remove O-ring seal (7) from outside housing (8).
5. Remove bolts (4), washers (5), and retainer (6) from rotor (11).
2/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside
housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb).
7. Remove seals (9) from outside housing (8).
8. Remove O-ring seals (10) from the outside housing (8).
9. Remove plug (13). Remove O-ring seal (12) from plug (13).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:06:17 UTC+0800 2020
3/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02426337
Swivel - Assemble
SMCS - 5060-016
Assembly Procedure
Note: Cleanliness is an important factor. Before assembly, thoroughly clean all parts in cleaning fluid.
Allow the parts to air dry. Do not use wiping cloths or rags to dry parts. Lint may be deposited on the parts
which may cause trouble. Inspect all parts. If any parts are worn or damaged, use new parts for
replacement. Dirt and other contaminants can damage the precision component. Perform assembly
procedures on a clean work surface. Keep components covered and protected at all times.
Note: Check the O-ring seals, the gaskets, and the seals for wear or for damage. Replace the components,
if necessary.
1/2
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g00633843
1. Install O-ring seal (12) on plug (13). Apply clean hydraulic oil on the seal. Install plug (13).
2. Install seals (9) and O-ring seals (10) into outside housing (8).
3. Carefully install outside housing (8) over rotor (11).
4. Install retainer (6), washers (5), and bolts (4). This holds the rotor (11) and the outside housing (8)
together.
5. Apply clean hydraulic oil on O-ring seal (7). Install the O-ring seal in the outside housing.
6. Install cover (3), washers (2), and bolts (1) that secure the cover.
7. Check the swivel joint for leaks. Plug the drain ports of the inside body. Apply shop air pressure in
the top of the swivel joint and check the swivel joint for leaks. The shop air pressure should be
between 0.2758 MPa (40 psi) and 0.4137 MPa (60 psi).
End By:
a. Install the swivel joint. Refer to Disassembly and Assembly, "Swivel - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:07:13 UTC+0800 2020
2/2
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434356
Swivel - Install
SMCS - 5060-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Illustration 1 g01216082
1. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Position swivel (9). Install boot (5) and clamp (7). Install
retainer (8) and bolts (6).
1/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 2 g01216069
2. Connect hose assemblies (1), (2), and (3). Install support (4).
Illustration 3 g01216098
3. Install bolts (13). Install fittings (14). Install fitting (16). Connect hose assemblies (15).
Connect hose assemblies (14) and (12) to swivel (9).
Illustration 4 g01216099
4. Install covers (11) and bolts (10).
2/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 5 g01209599
5. Remove Tooling (A).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:08:10 UTC+0800 2020
3/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434311
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Remove
SMCS - 5479-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Note: Put identification marks on all lines, on all hoses, on all harness assemblies, and on all tubes
for installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
1/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
Illustration 1 g00690963
1. Install Tooling (A) onto the hydraulic tank. Attach an air supply hose onto Tooling (A).
Apply 276 to 414 kPa (40 to 60 psi) of air. This procedure will pull vacuum on the
hydraulic system.
2/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 2 g01206719
2. Open door (1).
Illustration 3 g01216136
3. Disconnect harness assemblies (4).
4. Disconnect hose assemblies (2) and (3).
5. Remove bolts (5) and solenoid valve (6).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:09:06 UTC+0800 2020
3/3
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02434312
Solenoid Valve (Two-Way Flow and One Pump/Two Pump) -
Install
SMCS - 5479-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
Illustration 1 g01216136
1/2
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 1. Install solenoid valve (6) and bolts (5).
2. Connect hose assemblies (2) and (3).
3. Connect harness assemblies (4).
Illustration 2 g01206719
4. Close door (1).
Illustration 3 g00690963
5. Remove Tooling (A) from the hydraulic tank.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:10:03 UTC+0800 2020
2/2
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02413351
Swing Cushion Valve - Remove
SMCS - 5454-015
Removal Procedure
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
Illustration 1 g01206252
1. Disconnect hose assemblies (1) and (2). Disconnect harness assembly (4). Remove bolts (3)
and remove swing cushion valve (5).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed May 27 16:11:00 UTC+0800 2020
1/1
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02096925
Swing Cushion Valve - Disassemble - Fine Swing Solenoid
SMCS - 5454-015
Disassembly Procedure
Start By:
a. Remove the swing cushion valve. Refer to Disassembly and Assembly, "Swing Cushion
Valve - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.
Illustration 1 g00702083
1. Remove O-ring seals (1) and (2) from the valve body.
2. Remove the fine swing solenoid, as follows.
1/4
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 2 g00702084
a. Remove bolts (3).
b. Remove fine swing solenoid (4).
Illustration 3 g00702085
c. Remove O-ring seal (8), (6), (7), and (5).
3. Remove the relief valves, as follows.
Illustration 4 g00702097
2/4
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Illustration 5 g00702102
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
a. Remove relief valve (9) from the valve body.
b. Remove spring (12), plunger (11), and ball valve (10) from relief valve (9).
Illustration 6 g00702106
c. Remove backup ring (13) and O-ring seal (14) from the relief valve.
4. Repeat Steps 3.a through 3.c for the remaining relief valve.
Wed May 27 16:11:56 UTC+0800 2020
3/4
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D2 L EXCAVATOR FAR
Configuration: 336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i02096926
Swing Cushion Valve - Assemble - Fine Swing Solenoid
SMCS - 5454-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-6396 O-Ring Assembly Compound
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement. All disassembly and all assembly procedures
must be performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts
covered and protected at all times.
Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have the
same sealing properties as a new O-ring. Use Tooling (A) during the assembly procedure.
1. Install the relief valves, as follows.
1/4
336D2 & 336D2 L Excavators FAR00001-UP (MACHINE) POWERED BY C9 Engi...
2020/5/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...