This document provides the disassembly and assembly procedures for a travel motor on a 336D L and 336D LN excavator. It outlines 28 steps to disassemble the travel motor involving removing various components like the head, port plate, bearings, springs, friction discs, and seals. It then outlines 15 steps for reassembling the travel motor, applying thread lock compound and lubricant to components and ensuring marks are aligned before reinstalling parts like the piston assemblies and bearing races in their original positions. Required tools are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...cdfxssw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...cdfxssw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...cdsasw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...fhsjekdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...fjskekdmjekm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...fhsjekdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...fjskekdmjekm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for the procedures are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...cdsasw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...cdfxssw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...cdfxssw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...cdsasw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...fhsjekdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...fjskekdmjekm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...fhsjekdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 336 d l excavator (prefix pgw) service repair manual (pgw0000...fjskekdmjekm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for the procedures are also listed.
Caterpillar cat 336 d excavator (prefix pgw) service repair manual (pgw00001 ...cdsasw
This document provides the disassembly and assembly procedures for a travel motor on excavator models 336D and 336D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of parts that were marked during disassembly. Tools required for disassembly and assembly are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...fjsekkdmeik
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsekekmmd
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...fjsekdmmeed
This document provides the disassembly and assembly procedures for a 325D L excavator travel motor. Key steps include:
1. Removing the travel motor and marking components for reassembly.
2. Dismantling internal components like the head, plates, seals, springs, and bearing races.
3. Cleaning all parts thoroughly before inspection and assembly.
4. Reassembling components in reverse order, taking care to return parts to their original positions and applying thread lock compound as needed. Proper tooling is required for pressing and installing retaining rings.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 324 d excavator (prefix jzr) service repair manual (jzr00001 ...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsejdkemmn
This document provides the disassembly procedure for a 325D L excavator travel motor. Key steps include:
1. Removing the travel motor and cleaning/marking components for reassembly.
2. Disassembling the travel motor housing and removing internal components like seals, springs, plates, and shafts.
3. Cleaning all parts thoroughly before reassembly and reinstalling components in reverse order, taking care to align marks and apply threadlocker as needed.
Caterpillar cat 324 d excavator (prefix tsn) service repair manual (tsn00001 ...fjskekazswdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure instructs to install components in reverse order, noting that all seals and gaskets must be replaced and components cleaned before assembly. Proper tooling and torque specifications are listed for selected assembly steps.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix ZBJ) Service Repair Manu...yin9niaojiao
This document provides instructions for disassembling and assembling a travel motor and final drive for Caterpillar 336F L and 336F LN excavators. It lists required tools and parts and includes diagrams illustrating the 27 steps to assemble the travel motor. These include installing seals, springs, plates, and fasteners in the proper sequence and orientation. The instructions also describe removing the final drive and travel motor as a unit and then separating the individual components.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...yin9niaojiao
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides notes on proper installation of springs, seals, and ensuring alignment of keys and notches. Tools required include a transmission repair stand, lifting eyes, bolts, drivers and pullers. Personal protective equipment is recommended when working with springs.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix KFT) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling a 336F excavator travel motor. It describes 27 steps to remove components such as the motor head, springs, seals, relief valves, plugs and ball bearings. Tools include a transmission repair stand, lifting eye assembly, driver group and retaining ring pliers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336E LH and 336E LNH Excavator (Prefix GNY) Service Repair Ma...yin9niaojiao
The document provides instructions for removing and installing a travel motor on an excavator. It is a 28-step procedure that includes draining oil, removing hoses and fittings, using lifting devices to remove the final drive and travel motor assembly, and reinstalling the components in reverse order. Precautions are provided for working with pressurized hydraulic systems and heavy components. The installation steps specify applying anti-seize compound to bolts and torquing them to the specified values.
Caterpillar Cat 336E H and 336E LH EXCAVATOR (Prefix JEA) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps to disassemble the motor, removing components like the head, springs, brake piston, and bearing races. It then lists 28 steps for reassembling the motor, describing how to install seals, plates, springs and other parts in the reverse order of disassembly. Precautions are provided to prevent injury from spring forces and ensure proper alignment of parts.
Caterpillar Cat 336D2, 336D2 L and 336D2 GC Excavator (Prefix FAJ) Service Re...yin9niaojiao
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
Caterpillar Cat 336D2 XE and 336D2 LXE Excavator (Prefix NAH) Service Repair ...yin9niaojiao
This document provides the disassembly and assembly procedures for a travel motor on a Cat 336D2 excavator model. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. It then lists 30 steps for assembly, installing components like seals, pistons, bearings, springs and covers in the reverse order of disassembly. The document provides illustrations and notes for each step to ensure correct reassembly.
Caterpillar Cat 336D2, 336D2 L and 336D2 GC Excavator (Prefix FBT) Service Re...yin9niaojiao
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions are provided for each component, along with illustrations to aid in the process. Safety notices are also included.
Caterpillar Cat 336D2 XE and 336D2 LXE Excavator (Prefix MFA) Service Repair ...yin9niaojiao
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to safely release spring forces during disassembly.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix MYG) Service Repair Manu...yin9niaojiao
This document provides instructions for disassembling and assembling the swing motor of 336D L and 336D LN excavators. The disassembly procedure involves 26 steps to remove components like the head, pistons, barrel, housing, seals and bearings. The assembly procedure reverses the disassembly steps and includes cleaning and inspecting parts, applying oil, and torquing bolts to the specified value. Proper tools and safety precautions are noted throughout to prevent injury from spring loaded parts.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix PPN) Service Repair Manu...yin9niaojiao
1. The document provides instructions for disassembling and assembling a piston pump used in Caterpillar 336D L and 336D LN excavators.
2. The disassembly procedure includes using various tools to remove over 30 individual parts from the pump in the correct order.
3. Reassembly requires carefully installing each part in the reverse order, ensuring proper placement and installation of seals, bearings, springs and other components. Temperatures must be controlled for some parts.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix KDJ) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) used in Caterpillar 336D L and 336D LN excavators. It lists 22 steps for disassembly, removing various components like housing, springs, seals and bearings. The assembly section lists 30 steps to install these components in reverse order, noting that cleanliness is important and worn parts should be replaced. It also provides illustrations matching each step for clarity.
Caterpillar Cat 330F and 330F LN Excavator (Prefix HBT) Service Repair Manual...yin9niaojiao
This document provides instructions for removing and installing components related to the crankshaft and front cover of a Caterpillar 330F excavator engine. The procedures include removing and installing the crankshaft pulley, vibration damper, front seal, and heavy duty front cover. Tools required are listed for each procedure. Illustrations show the components and steps to disassemble and reassemble the assemblies.
This document provides installation instructions for a main hydraulic pump on a 330D excavator. It lists 54 steps to assemble components like pistons, gears, brackets, hoses and sensors. Tools include lever pullers, link brackets and torque wrenches. Precautions are given for spring loaded parts. The process involves lifting heavy components and ensuring proper hose, harness and bracket connections.
Caterpillar Cat 336D and 336D L Excavator (Prefix WRK) Service Repair Manual ...yin9niaojiao
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It lists required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and preventing contamination.
More Related Content
Similar to Caterpillar Cat 336D L and 336D LN Excavator (Prefix MYP) Service Repair Manual Instant Download.pdf
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...fjsekkdmeik
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsekekmmd
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...fjsekdmmeed
This document provides the disassembly and assembly procedures for a 325D L excavator travel motor. Key steps include:
1. Removing the travel motor and marking components for reassembly.
2. Dismantling internal components like the head, plates, seals, springs, and bearing races.
3. Cleaning all parts thoroughly before inspection and assembly.
4. Reassembling components in reverse order, taking care to return parts to their original positions and applying thread lock compound as needed. Proper tooling is required for pressing and installing retaining rings.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 324 d excavator (prefix jzr) service repair manual (jzr00001 ...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsejdkemmn
This document provides the disassembly procedure for a 325D L excavator travel motor. Key steps include:
1. Removing the travel motor and cleaning/marking components for reassembly.
2. Disassembling the travel motor housing and removing internal components like seals, springs, plates, and shafts.
3. Cleaning all parts thoroughly before reassembly and reinstalling components in reverse order, taking care to align marks and apply threadlocker as needed.
Caterpillar cat 324 d excavator (prefix tsn) service repair manual (tsn00001 ...fjskekazswdmme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure instructs to install components in reverse order, noting that all seals and gaskets must be replaced and components cleaned before assembly. Proper tooling and torque specifications are listed for selected assembly steps.
Similar to Caterpillar Cat 336D L and 336D LN Excavator (Prefix MYP) Service Repair Manual Instant Download.pdf (7)
Caterpillar Cat 336F L and 336F LN Excavator (Prefix ZBJ) Service Repair Manu...yin9niaojiao
This document provides instructions for disassembling and assembling a travel motor and final drive for Caterpillar 336F L and 336F LN excavators. It lists required tools and parts and includes diagrams illustrating the 27 steps to assemble the travel motor. These include installing seals, springs, plates, and fasteners in the proper sequence and orientation. The instructions also describe removing the final drive and travel motor as a unit and then separating the individual components.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix WTZ) Service Repair Manu...yin9niaojiao
This document provides the disassembly and assembly procedures for a 336F excavator travel motor. The disassembly procedure involves 30 steps to remove all components of the travel motor. The assembly procedure reverses the disassembly process in 27 steps and provides notes on proper installation of springs, seals, and ensuring alignment of keys and notches. Tools required include a transmission repair stand, lifting eyes, bolts, drivers and pullers. Personal protective equipment is recommended when working with springs.
Caterpillar Cat 336F L and 336F LN Excavator (Prefix KFT) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling a 336F excavator travel motor. It describes 27 steps to remove components such as the motor head, springs, seals, relief valves, plugs and ball bearings. Tools include a transmission repair stand, lifting eye assembly, driver group and retaining ring pliers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336E LH and 336E LNH Excavator (Prefix GNY) Service Repair Ma...yin9niaojiao
The document provides instructions for removing and installing a travel motor on an excavator. It is a 28-step procedure that includes draining oil, removing hoses and fittings, using lifting devices to remove the final drive and travel motor assembly, and reinstalling the components in reverse order. Precautions are provided for working with pressurized hydraulic systems and heavy components. The installation steps specify applying anti-seize compound to bolts and torquing them to the specified values.
Caterpillar Cat 336E H and 336E LH EXCAVATOR (Prefix JEA) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling and assembling the travel motor of a 336E excavator. It outlines 27 steps to disassemble the motor, removing components like the head, springs, brake piston, and bearing races. It then lists 28 steps for reassembling the motor, describing how to install seals, plates, springs and other parts in the reverse order of disassembly. Precautions are provided to prevent injury from spring forces and ensure proper alignment of parts.
Caterpillar Cat 336D2, 336D2 L and 336D2 GC Excavator (Prefix FAJ) Service Re...yin9niaojiao
This document provides disassembly instructions for a travel motor on a 336D2 excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, springs, seals, and plates. Special care must be taken when removing or handling components with stored spring energy to avoid personal injury. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools.
Caterpillar Cat 336D2 XE and 336D2 LXE Excavator (Prefix NAH) Service Repair ...yin9niaojiao
This document provides the disassembly and assembly procedures for a travel motor on a Cat 336D2 excavator model. It lists 30 steps for disassembly, removing components like caps, springs, valves, plugs and seals. It then lists 30 steps for assembly, installing components like seals, pistons, bearings, springs and covers in the reverse order of disassembly. The document provides illustrations and notes for each step to ensure correct reassembly.
Caterpillar Cat 336D2, 336D2 L and 336D2 GC Excavator (Prefix FBT) Service Re...yin9niaojiao
This document provides instructions for removing and installing various engine components on a Caterpillar 336D2 excavator, including:
1) The engine oil filter and oil filter base.
2) The engine oil cooler.
3) The air cleaner assembly.
4) The turbocharger.
5) The water temperature regulator.
Detailed step-by-step instructions are provided for each component, along with illustrations to aid in the process. Safety notices are also included.
Caterpillar Cat 336D2 XE and 336D2 LXE Excavator (Prefix MFA) Service Repair ...yin9niaojiao
This document provides disassembly instructions for a 336D2 excavator travel motor. It outlines 27 steps to fully disassemble the travel motor. These include removing the motor head assembly, piston assemblies, barrel assembly, springs, seals, plates, and other internal components. Tools required include bolting fixtures, pry bars, pullers, and seal removal tools. Precautions are provided to retain component positioning for reassembly and to safely release spring forces during disassembly.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix MYG) Service Repair Manu...yin9niaojiao
This document provides instructions for disassembling and assembling the swing motor of 336D L and 336D LN excavators. The disassembly procedure involves 26 steps to remove components like the head, pistons, barrel, housing, seals and bearings. The assembly procedure reverses the disassembly steps and includes cleaning and inspecting parts, applying oil, and torquing bolts to the specified value. Proper tools and safety precautions are noted throughout to prevent injury from spring loaded parts.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix PPN) Service Repair Manu...yin9niaojiao
1. The document provides instructions for disassembling and assembling a piston pump used in Caterpillar 336D L and 336D LN excavators.
2. The disassembly procedure includes using various tools to remove over 30 individual parts from the pump in the correct order.
3. Reassembly requires carefully installing each part in the reverse order, ensuring proper placement and installation of seals, bearings, springs and other components. Temperatures must be controlled for some parts.
Caterpillar Cat 336D L and 336D LN Excavator (Prefix KDJ) Service Repair Manu...yin9niaojiao
The document provides instructions for disassembling and assembling a piston pump (hydraulic fan) used in Caterpillar 336D L and 336D LN excavators. It lists 22 steps for disassembly, removing various components like housing, springs, seals and bearings. The assembly section lists 30 steps to install these components in reverse order, noting that cleanliness is important and worn parts should be replaced. It also provides illustrations matching each step for clarity.
Caterpillar Cat 330F and 330F LN Excavator (Prefix HBT) Service Repair Manual...yin9niaojiao
This document provides instructions for removing and installing components related to the crankshaft and front cover of a Caterpillar 330F excavator engine. The procedures include removing and installing the crankshaft pulley, vibration damper, front seal, and heavy duty front cover. Tools required are listed for each procedure. Illustrations show the components and steps to disassemble and reassemble the assemblies.
This document provides installation instructions for a main hydraulic pump on a 330D excavator. It lists 54 steps to assemble components like pistons, gears, brackets, hoses and sensors. Tools include lever pullers, link brackets and torque wrenches. Precautions are given for spring loaded parts. The process involves lifting heavy components and ensuring proper hose, harness and bracket connections.
Caterpillar Cat 336D and 336D L Excavator (Prefix WRK) Service Repair Manual ...yin9niaojiao
The document provides instructions for removing and installing a final drive and travel motor on a Caterpillar 336D excavator. It lists required tools and gives step-by-step instructions involving disconnecting hoses, removing bolts and brackets, lifting out the assembly, and reinstalling it in reverse order. Safety notices are provided regarding containing fluids and preventing contamination.
Caterpillar Cat 330D2 and 330D2 L Excavator (Prefix HER) Service Repair Manua...yin9niaojiao
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves 37 steps to remove all components of the final drive. Key steps include removing the final drive cover, gears, carrier assembly, planetary gears, and sprocket housing. The assembly process has 36 steps and involves installing components in reverse order while applying anti-seize compound and ensuring proper bearing preload using shims.
Caterpillar Cat 330D L Excavator (Prefix R2D) Service Repair Manual Instant D...yin9niaojiao
This document provides instructions for removing and installing the rear gear group and related components on a 330D L excavator with a C9 engine. The removal process involves using tools to remove bolts, gears, bushings, bearings, and covers. The installation process gives specifics on cleaning parts, applying adhesives, inserting bearings at the proper angles and depths, and torquing bolts. Tolerances are provided for correct installation of several components.
Caterpillar Cat 330D L Excavator (Prefix HAS) Service Repair Manual Instant D...yin9niaojiao
The document provides installation instructions for a swivel on an excavator. It describes removing the swivel by disconnecting hoses, removing bolts and lifting it out. It then details assembling the swivel by cleaning parts, installing seals and O-rings, positioning the housing over the rotor, and securing them with bolts. Finally, it describes installing the assembled swivel by connecting hoses and fittings and securing it with bolts.
Caterpillar Cat 330D2 and 330D2 L Excavator (Prefix FEX) Service Repair Manua...yin9niaojiao
The document provides instructions for disassembling a 330D2 excavator final drive. It involves 33 steps including removing the final drive cover, carrier assembly, planetary gears, ring gears, and other components. Various tools are required including link brackets, eyebolts, retaining ring pliers, and a transmission repair stand to support components weighing up to 550 kg during disassembly. Cleanliness is important to prevent dirt from entering internal mechanisms.
The document provides instructions for disassembling the final drive of a 330D MH EXCAVATOR. It lists 31 steps to completely disassemble the final drive assembly including removing gears, carriers, shafts, seals and housings. Various tools are required including retaining ring pliers, link brackets, eyebolts and forcing bolts to separate the components. Cleanliness is important to prevent dirt from entering during disassembly.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
3/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
4/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 2 g00887302
6. Remove O-ring seal (3) , port plate (4) , and bearing (5) .
Illustration 3 g00887311
7. Remove O-ring seals (6) . Remove springs (7) .
Illustration 4 g00887331
5/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g00890074
This is an example of the use of Tooling (B) .
8. Place a shop towel over brake piston (8) . Retain brake piston (8) with Tooling (B) . Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y) . Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
6/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g00887355
11. Remove plates (13) and friction discs (14) .
Illustration 8 g00887401
Illustration 9 g00887405
12. Install Tooling (C) into shaft (15) . Use a prybar to remove the rotating assembly (16) from
the housing.
7/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 13. Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
14. Remove shaft (15) from rotating assembly (16) .
Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
8/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 12 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
Illustration 13 g00887463
17. Rotate shaft (15) . Install shaft (15) into a suitable press. Install Tooling (E) . Remove
bearing race (19) from shaft (15) .
Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21) .
9/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21) .
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
Illustration 16 g00887558
20. Remove ball (23) and springs (24) .
10/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00887578
21. Remove bearing (25) .
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
24. Remove seal (28) .
Illustration 19 g00887619
25. Remove bolts (29) and cover (30) .
11/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 20 g00887729
26. Remove seal (31) and backup ring (32) .
Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34) .
Illustration 22 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
12/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D LN EXCAVATOR MYP
Configuration: 336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i03124523
Travel Motor - Assemble
SMCS - 4351-016
S/N - B6H1-UP
S/N - DTS1-UP
S/N - EAH1-UP
S/N - EDX1-UP
S/N - EFT1-UP
S/N - ERN1-UP
S/N - FAR1-UP
S/N - FFK1-UP
S/N - GGE1-UP
S/N - GGH1-UP
S/N - HAS1-UP
S/N - HHK1-UP
S/N - J2F1-UP
S/N - JBT1-UP
S/N - JLP1-UP
S/N - JTN1-UP
1/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. S/N - WRK1-UP
S/N - XBH1-UP
S/N - YCF1-UP
S/N - ZCT1-UP
S/N - ZML1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded Rod M12 x 1.75 X 250 mm (10 in) long 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G 9S-3263 Thread Lock Compound -
Note: Replace all O-ring seals and gaskets. Apply a light film of"10W" oil to all components
before assembly.
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause trouble later. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement. All disassembly and all assembly procedures
must be performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts
covered and protected at all times.
3/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33) .
Illustration 3 g00887729
3. Install backup ring (32) and seal (31) .
4/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 4 g00887619
4. Install cover (30) and bolts (29) . Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of seal (28) . Use Tooling (E) in order to install
seal (28) .
6. Use Tooling (F) in order to install retaining ring (27) .
5/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 6 g00887578
7. Rotate the housing.
8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25) .
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel. Install ball (23) onto springs (24) .
6/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 8 g00887520
11. Install piston assemblies and retainer plate (22) into barrel assembly (21) .
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Install cam plate (20) onto barrel assembly (21) .
7/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15) .
Illustration 12 g00888710
15. Install bearing race (18) onto shaft (15) .
Note: Bearing race (18) must contact retaining ring (17) .
8/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 13 g00887405
16. Install Tooling (C) into shaft (15) . Install shaft (15) into rotating assembly (16) .
17. Place the pump housing into Tooling (A) .
Illustration 14 g00887401
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
Illustration 15 g00887501
9/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 16 g00887578
19. The notches in cam plate (20) must align with keys (26) . The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
10/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8) .
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
11/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
26. Install O-ring seal (3) , port plate (4) , and bearing (5) .
Illustration 22 g00887295
27. Install head (2) onto the body of the travel motor.
12/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1) . Tighten bolts (1) to a torque of 240 ± 40 N·m (177 ± 30 lb ft).
End By: Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 19 00:40:54 UTC+0800 2020
13/13
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 E...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 336D LN EXCAVATOR MYP
Configuration: 336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engine
Disassembly and Assembly
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic
Power Unit Machine Systems
Media Number -RENR8648-30 Publication Date -01/03/2015 Date Updated -15/08/2018
i03808350
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 1 g00878123
2. Install new O-ring seal (6) . Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4) , as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. 5. Carefully install travel motor (4) onto Tooling (A) . Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3) . Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4
336D L & 336D LN Excavator MYP00001-UP (MACHINE) POWERED BY C9 Engi...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...