This document provides instructions for disassembling and assembling the final drive of an excavator model 330F. It begins with disassembly steps including removing the final drive assembly and various gears, shafts, and housings. It then describes assembling the final drive by cleaning parts, pressing in bearings, installing seals, adjusting bearing preload with shims, and reinstalling gears and housings. The summary provides an overview of the key steps and goals of the document.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. Proper maintenance such as following instructions, using correct tools and parts, cleaning components, and ensuring tight fasteners is important to maximize engine performance and longevity. The document provides an overview of engine operation and maintenance procedures.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design and specifications including power, torque, and idle speeds. Exploded diagrams show the main engine components and assemblies in the DE12, DE12TI, and DE12TIS configurations. General repair instructions are provided to guide proper maintenance techniques.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. The manual includes symbols to indicate maintenance tasks and safety instructions for preventing environmental damage when disposing of waste. It aims to help customers and distributors properly operate and maintain the engines to retain maximum performance over the long term.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdffujskmd9dokk
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, cover, screws, nuts, and other minor parts. The manual provides an exploded diagram of the power unit and an index of the parts to allow technicians to identify replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdffujskmd9dokk
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. Proper maintenance such as following instructions, using correct tools and parts, cleaning components, and ensuring tight fasteners is important to maximize engine performance and longevity. The document provides an overview of engine operation and maintenance procedures.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the key features of the engines such as their OMEGA combustion bowl design and specifications including power, torque, and idle speeds. Exploded diagrams show the main engine components and assemblies in the DE12, DE12TI, and DE12TIS configurations. General repair instructions are provided to guide proper maintenance techniques.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdffujskmd9dokk
This maintenance manual provides instructions for maintaining Daewoo DE series diesel engines, including the DE12, DE12T, DE12TI, and DE12TIS models. It describes the engine components and specifications. The manual includes symbols to indicate maintenance tasks and safety instructions for preventing environmental damage when disposing of waste. It aims to help customers and distributors properly operate and maintain the engines to retain maximum performance over the long term.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdffujskmd9dokk
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, cover, screws, nuts, and other minor parts. The manual provides an exploded diagram of the power unit and an index of the parts to allow technicians to identify replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdffujskmd9dokk
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdffujskmd9dokk
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdffujskmd9dokk
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark EPX 16-20S Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark forklift models TMX12-25 and ECX16-18. It provides instructions on using and arranging the manual, which is divided into standardized groups and sections. The manual outlines safety practices and procedures for maintaining the forklifts, including proper lifting, jacking, and blocking of the vehicles. It emphasizes using qualified personnel and following the manufacturer's recommendations to safely conduct maintenance and repairs.
Clark CMP 70 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides instructions for safely maintaining Clark industrial trucks. It outlines 21 safe maintenance practices, such as raising trucks on blocks before working on them, disconnecting batteries, inspecting brakes and other components regularly, and using lifting equipment of the proper capacity when removing heavy components. Technicians are instructed to follow the manufacturer's recommendations and use genuine or approved replacement parts.
Clark CMP 60 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark Material Handling Company's CMP50/60/70 trucks. It contains safety instructions for maintaining the trucks, including raising them on blocks, disconnecting batteries, and checking for fuel and electrical system issues. The manual is arranged by topic groups and sections for locating specific maintenance and repair procedures.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...fujskmd9dokk
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure clean and contamination-free assembly.
Caterpillar Cat 336F L Excavator (Prefix YFD) Service Repair Manual (YFD00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or releasing parts under spring force.
Caterpillar Cat 336F L Excavator (Prefix DSW) Service Repair Manual (DSW00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety notices advise wearing protective equipment when compressing springs or releasing pressurized components during disassembly.
This document provides instructions for disassembling a piston pump used in Caterpillar articulated trucks. The pump is removed from the machine and various internal components are then dismantled. These components include pressure and flow compensator valves, springs, seals, pistons, barrels and housings. Detailed illustrations accompany each step to show how to access fasteners and position parts for removal or disassembly. Safety notices are also included regarding contained fluids and released spring forces during the process. The overall document provides a technical service manual excerpt on thoroughly disassembling a hydraulic pump assembly.
This document provides installation instructions for installing a piston pump in a 725 articulated truck. It lists the required tools and gives 37 steps for installing components like seals, springs, bearings and valves into the pump housing. It instructs technicians to take care when installing spring loaded parts to avoid injury and provides diagrams illustrating each step. The instructions conclude by stating to refer to the separate document for installing the completed piston pump.
Caterpillar Cat 336F L Excavator (Prefix LCL) Service Repair Manual (LCL00001...fujskmd9dokk
This document provides disassembly instructions for a 336F and 336F L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, swashplate, and other internal components. Various tools are required, and technicians are warned to contain fluids and watch for released spring forces during disassembly. The detailed illustrations and part numbers aid in correctly reassembling the travel motor.
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or handling parts with spring forces.
This document provides disassembly instructions for a 336F and 336F L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, swashplate, and other internal components. Various tools are required, and technicians are warned to contain fluids and watch for released spring forces during disassembly. The detailed illustrations and part numbers aid in correctly reassembling the travel motor.
Kubota LA1403 Front Loader Service Repair Manual.pdffujskmd9dokk
This workshop manual provides information for servicing a Kubota LA1403 front loader. It is divided into three parts: General, Mechanism, and Servicing. The General section includes identification, safety, maintenance, and specifications. The Mechanism section describes the construction and functions. The Servicing section covers troubleshooting, specifications, disassembly and assembly procedures. Safety instructions are also provided to prepare technicians for safe servicing of the loader.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdffujskmd9dokk
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdffujskmd9dokk
This document is a service manual that provides instructions for safely maintaining Clark forklifts. It discusses identifying information for specific forklift models covered by the manual and how the manual is organized. The document also provides extensive safety guidelines and warnings for maintenance personnel, covering topics like ensuring adequate ventilation, blocking wheels before starting work, disconnecting batteries, and only performing approved modifications. Personnel are instructed to carefully read and understand all safety procedures before working on forklifts.
Clark EPX 16-20S Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark forklift models TMX12-25 and ECX16-18. It provides instructions on using and arranging the manual, which is divided into standardized groups and sections. The manual outlines safety practices and procedures for maintaining the forklifts, including proper lifting, jacking, and blocking of the vehicles. It emphasizes using qualified personnel and following the manufacturer's recommendations to safely conduct maintenance and repairs.
Clark CMP 70 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides instructions for safely maintaining Clark industrial trucks. It outlines 21 safe maintenance practices, such as raising trucks on blocks before working on them, disconnecting batteries, inspecting brakes and other components regularly, and using lifting equipment of the proper capacity when removing heavy components. Technicians are instructed to follow the manufacturer's recommendations and use genuine or approved replacement parts.
Clark CMP 60 Forklift Service Repair Manual.pdffujskmd9dokk
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdffujskmd9dokk
This document is the service manual for Clark Material Handling Company's CMP50/60/70 trucks. It contains safety instructions for maintaining the trucks, including raising them on blocks, disconnecting batteries, and checking for fuel and electrical system issues. The manual is arranged by topic groups and sections for locating specific maintenance and repair procedures.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...fujskmd9dokk
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure clean and contamination-free assembly.
Caterpillar Cat 336F L Excavator (Prefix YFD) Service Repair Manual (YFD00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or releasing parts under spring force.
Caterpillar Cat 336F L Excavator (Prefix DSW) Service Repair Manual (DSW00001...fujskmd9dokk
This document provides instructions for disassembling the travel motor on 336F and 336F L excavator models. It outlines 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, friction plates, seals, springs, and other internal components. Detailed illustrations are provided to identify each part mentioned in the procedure. Safety notices advise wearing protective equipment when compressing springs or releasing pressurized components during disassembly.
This document provides instructions for disassembling a piston pump used in Caterpillar articulated trucks. The pump is removed from the machine and various internal components are then dismantled. These components include pressure and flow compensator valves, springs, seals, pistons, barrels and housings. Detailed illustrations accompany each step to show how to access fasteners and position parts for removal or disassembly. Safety notices are also included regarding contained fluids and released spring forces during the process. The overall document provides a technical service manual excerpt on thoroughly disassembling a hydraulic pump assembly.
This document provides installation instructions for installing a piston pump in a 725 articulated truck. It lists the required tools and gives 37 steps for installing components like seals, springs, bearings and valves into the pump housing. It instructs technicians to take care when installing spring loaded parts to avoid injury and provides diagrams illustrating each step. The instructions conclude by stating to refer to the separate document for installing the completed piston pump.
Caterpillar Cat 336F L Excavator (Prefix LCL) Service Repair Manual (LCL00001...fujskmd9dokk
This document provides disassembly instructions for a 336F and 336F L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, swashplate, and other internal components. Various tools are required, and technicians are warned to contain fluids and watch for released spring forces during disassembly. The detailed illustrations and part numbers aid in correctly reassembling the travel motor.
This document provides instructions for disassembling the travel motor on a 336F excavator. It involves removing over 30 components in 27 steps, including the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Tools required include bolts, nuts, washers, threaded rods, eyebolts, drivers, pullers, and other specialized tooling. Detailed illustrations are provided to show each component and step in the disassembly process. Safety notices advise wearing protective equipment when removing or handling parts with spring forces.
This document provides disassembly instructions for a 336F and 336F L excavator travel motor. It outlines 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, swashplate, and other internal components. Various tools are required, and technicians are warned to contain fluids and watch for released spring forces during disassembly. The detailed illustrations and part numbers aid in correctly reassembling the travel motor.
Kubota LA1403 Front Loader Service Repair Manual.pdffujskmd9dokk
This workshop manual provides information for servicing a Kubota LA1403 front loader. It is divided into three parts: General, Mechanism, and Servicing. The General section includes identification, safety, maintenance, and specifications. The Mechanism section describes the construction and functions. The Servicing section covers troubleshooting, specifications, disassembly and assembly procedures. Safety instructions are also provided to prepare technicians for safe servicing of the loader.
Caterpillar Cat 336D2 L Excavator (Prefix YCF) Service Repair Manual (YCF0000...fujskmd9dokk
The document provides instructions for disassembling and assembling a piston pump. It outlines 30 steps for assembly, beginning with installing various bearings, seals, pistons, springs and other components in the proper order. Disassembly instructions describe 8 steps, including removing the head, port plate, bearings, pistons, pins and other parts. Safety warnings are provided to prevent injury from spring forces.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330F EXCAVATOR JHF
Configuration: 330F L & 330F LN Excavators JHF00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i05436085
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G 138-7576 Link Bracket 2
H 154-6181 Forcing Screw 3
Start By:
a. Remove the final drive.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled to the original locations.
1/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
3. Illustration 1 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto
Tooling (A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
Illustration 2 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 3 g00892888
2/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
4. 5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn.
Remove plugs (5) from cover (2).
Illustration 4 g00892906
6. Remove O-ring seals (7) from plugs (5).
Illustration 5 g00892930
7. Remove gear (8) and spacer (9).
Illustration 6 g00892965
3/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
5. 8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 7 g00892968
10. Remove retaining ring (15).
Illustration 8 g00892975
11. Remove carrier assembly (16).
4/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
6. Illustration 9 g02408860
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 10 g00892977
13. Remove gear (17) and spacer (18).
Illustration 11 g00892997
5/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
7. 14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 12 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 13 g00896860
16. Drive spring pin (23) into planetary shaft (22).
Illustration 14 g00893043
6/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
8. 17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 15 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 16 g01842853
20. Remove gear (27). Remove spacer (27A).
Illustration 17 g01842974
7/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
9. 21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 18 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 19 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
Illustration 20 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
8/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
10. 25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 21 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring
gear (34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg
(146 lb).
Illustration 22 g01208542
27. Remove O-ring seal (36) from sprocket housing (35).
Illustration 23 g01208553
9/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
11. 28. Remove bolts (37) from coupling gear (38).
Illustration 24 g03431447
29. Install Tooling (H) in coupling gear (38). Tighten the Tooling (H) evenly in order to loosen
coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 25 g01208578
Illustration 26 g01208625
30. Remove shims (40) from the motor housing.
10/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
12. Note: Inner cones and outer bearing cones (42) and (44) are a slip fit on the motor housing.
While you remove sprocket housing (35) from the motor housing, inner bearing cone (42)
and outer bearing cones (44) may stay with the sprocket housing or the inner bearing cone
may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the
sprocket housing from the motor housing. The weight of sprocket housing (35) is
approximately 109 kg (240 lb).
Illustration 27 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing
cone.
Illustration 28 g03431456
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If outer bearing cone (44) remained on the sprocket housing, then remove the outer bearing
cone.
37. Remove the bearing cups from the sprocket housing.
11/12(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 330F EXCAVATOR JHF
Configuration: 330F L & 330F LN Excavators JHF00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
326F, 329F and 330F Excavators Machine Systems
Media Number -UENR3313-07 Publication Date -01/09/2015 Date Updated -12/09/2018
i07332931
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Stand Group 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G
8T-9206 Duo-Cone Seal Installer As 1
169-0503 Installation Kit 1
H - Loctite C5A Copper Antiseize -
J - Loctite 242 Threadlocker -
K - Loctite Highflex GM -
L FT-2770 Leak down Test Tool 1
1. Make sure that all parts of the final drive are thoroughly clean and free of dirt and debris
prior to assembly. Check the condition of all O-ring seals that are used in the final drive. If
any of the seals are damaged, use new parts for replacement. Reassemble the final drive on
Tooling (A).
1/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
14. Illustration 1 g03431464
Note: New final drives are equipped with angular contact ball bearings.
2. Apply Tooling (H) to the surfaces inside sprocket housing (35) that contacts the bearing
cups. Install a bearing cup that is in each side of the sprocket housing with a press. Make
sure that the bearing cups are properly seated.
3. Apply Tooling (H) to the surfaces inside the sprocket housing that contacts bearing cones
(44).
4. Install outer bearing cone (44) in the sprocket housing.
Illustration 2 g01208625
5. Attach Tooling (F) and a suitable lifting device to sprocket housing (35). The weight of
sprocket housing (35) is approximately 109 kg (240 lb). Install sprocket housing (35) on the
motor housing. Carefully install inner bearing cone (42) on the sprocket housing.
2/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
15. Illustration 3 g01208578
6. Adjust the bearing preload of the final drive. Determine the correct number of shims (40)
that are required for the proper bearing preload, as follows:
Note: New final drives are equipped with angular contact ball bearings that require pre-load
like the old roller bearings.
Illustration 4 g01208987
a. Use a depth micrometer to measure the step height of coupling gear (38) at several
locations around the gear. Find the average for the measured dimensions around the
gear and record the dimension. Call this Dimension (X).
b. Apply a load of 4000 kg (8820 lb) to the bearing cones.
c. Rotate sprocket housing (35) several times to seat the bearing cones.
d. Reduce the load to 1000 ± 100 kg (2205 ± 220 lb).
3/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
16. Illustration 5 g00631001
e. With the bearing cones loaded, measure the distance between the top face of the
motor housing and the top face of the bearing cone. Take measurements in several
locations around the motor housing. Find the average of the measured dimensions,
and record the dimensions. Call this Dimension (Y).
f. Determine the correct thickness of the shims which are used between the bearing
cones and the coupling gear . Use the following equation to determine the shim pack
thickness.
Shim pack thickness ... (Y) − (X) ± 0.05 mm (0.002 inch)
Note: If two shims are required, install the thinnest shim next to the coupling gear
during final assembly.
Illustration 6 g03431699
7. Attach Tooling (F) and a suitable lifting device to sprocket housing (35). Separate sprocket
housing (35) from the motor housing.
Reference: Refer to Disassembly and Assembly, "Duo-Cone Conventional Seals - Install".
Note: The rubber seals and all surfaces that contacts the seals must be clean and dry. After
installation of the seals, put clean SAE 30 oil on the contact surfaces of the metal seals.
4/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
17. Illustration 7 g00631006
Illustration 8 g01208999
8. Use Tooling (G) to install Duo-Cone seal (43) in the sprocket housing.
Illustration 9 g00631014
5/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
18. Illustration 10 g03431475
9. Use Tooling (G) to install Duo-Cone seal (41) in the motor housing.
10. Apply Tooling (H) in the bores for the locating pins that are in the motor housing. Reinstall
the locating pins in the motor housing.
Illustration 11 g01208625
11. Make sure that inner bearing cone (42) is seated properly on the motor housing.
Note: Do not scratch Duo-Cone seal (41) or damage the Duo-Cone seal in the main
housing, or the motor housing during assembly of the two components. After installation of
the main housing on the motor housing, there will be a small gap between the components.
The gap between the components is caused by the Duo-Cone seal. The gap will be
eliminated during the installation of the coupling gear .
12. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Carefully install
the sprocket housing on the motor housing.
13. Install the outer bearing cone on the sprocket housing. Make sure that the outer bearing cone
is properly seated.
6/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
19. Illustration 12 g01208578
14. Install shims (40) that were determined in Steps 6.a through 6.f on the end of the sprocket
housing. If shims were required, make sure that the thinnest shim is installed on top.
Illustration 13 g01208553
15. Put coupling gear (38) in the original position on the motor housing.
16. Apply Tooling (J) on the threads of bolts (37) that hold coupling gear (38) in position.
Tighten bolts (37) evenly and tighten the bolts in diagonally opposite pairs to a torque of
570 ± 80 N·m (420 ± 60 lb ft).
Illustration 14 g01208542
7/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
20. 17. Install O-ring seal (36) in sprocket housing (35).
Illustration 15 g01208300
18. Thoroughly clean the mating surface of sprocket housing (35) that contacts ring gear (34).
19. Apply a bead of Tooling (K) on the mating surface of ring gear (34).
20. Attach Tooling (E) and a suitable lifting device to ring gear (34). Put ring gear (34) in
position on the sprocket housing. The weight of ring gear (34) is approximately 66 kg
(146 lb). Make sure that the alignment mark upon the sprocket housing and the ring gear
line with each other.
Illustration 16 g01843479
8/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
21. Illustration 17 g00893674
21. Assemble carrier assembly (28), as follows.
a. Install bearings (32) in planetary gear (33).
b. Install thrust washers (31) and planetary gear (33) in the carrier assembly.
c. Use a deburring tool to remove the metal burr from the openings in the carrier. Install
planetary shaft (29) in the carrier assembly.
d. Drive spring pin (30) into planetary shaft (29).
Illustration 18 g00941047
The stake mark is at position (S).
e. Orient the split in spring pin (30) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 2.25 ± 0.75 mm
(0.089 ± 0.030 inch) from the outside diameter of the spring pin hole.
22. Repeat Steps 21.a through 21.e to install the other two planetary gears in the carrier
assembly.
9/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
22. Illustration 19 g01842974
23. Use two people to install carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 20 g01842853
24. Install spacer (27A). Install gear (27).
Illustration 21 g00897548
10/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 22 g00896863
25. Assemble planetary carrier (19), as follows.
a. Install bearing (25) in planetary gear (26).
b. Install thrust washers (24) and planetary gear (26) in the planetary carrier.
c. Use a deburring tool to remove the metal burr from the openings in the carrier. Install
planetary shaft (22) in planetary carrier (19).
d. Drive spring pin (23) into planetary shaft (22).
Illustration 23 g00941047
The stake mark is at position (S).
e. Orient the split in spring pin (23) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 2.25 ± 0.75 mm
(0.089 ± 0.030 inch) from the outside diameter of the spring pin hole.
f. Repeat Steps 25.a through 25.e to install the other two planetary gears in the carrier.
11/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
25. Illustration 24 g00893019
26. Position sun gear (20) in planetary carrier (19) and install retaining ring (21).
Illustration 25 g00892997
27. Use Tooling (D) and a suitable lifting device to install planetary carrier (19) into gear (34).
The weight of planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 26 g00892977
28. Install spacer (18) and gear (17).
12/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...
26. Illustration 27 g01389807
Note: Make sure that the oil passages in the shafts are oriented toward the center of carrier
assembly (16).
29. Raise the temperature of carrier assembly (16). Lower the temperature of the shafts. Install
the shafts into carrier assembly (16) until the groove of the shafts is at Dimension (A).
Dimension (A) equals 25.00 ± 0.10 mm (0.984 ± 0.004 inch).
30. Make eight stake marks at distance of Dimension (C) from each shaft. Dimension (C)
equals 2.0 ± 1.0 mm (0.08 ± 0.04 inch). The width of each stake mark should be equal to
Dimension (B). Dimension (B) equals 4.0 ± 1.0 mm (0.16 ± 0.04 inch).
Illustration 28 g00892975
13/17(W)
w
2020/7/4
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/siswe...