The document provides instructions for disassembling the final drive of a 329DL Mobile Hydraulic Power Unit. It lists required tools and describes a 37 step process involving removing housing, gears, carriers, shafts, seals, and other components. Special tools are needed to remove some parts, and lifting devices are required due to component weights up to 550 kg. Cleanliness is important to prevent dirt from entering internal mechanisms during disassembly.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix j9d) service r...ifse9diodkdk
This document provides the disassembly and assembly procedures for a travel motor on a 329DL Mobile Hydraulic Power Unit excavator. The disassembly procedure outlines 28 steps to dismantle the various components of the travel motor. The assembly procedure describes 19 steps to reassemble the travel motor components in reverse order. Proper cleaning and installation of new seals and gaskets is emphasized throughout.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...kubei069369925
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...shanruliu7360
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...rishang96299
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...udjdkdkdmm
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31 step process involves removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other secured pieces. Cleanliness is important to prevent dirt contamination during disassembly.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...udjdkdkdmm
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual (SYM00001...km7seydwuhdw
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 329 dl mobile hyd power unit excavator (prefix j9d) service r...ifse9diodkdk
This document provides the disassembly and assembly procedures for a travel motor on a 329DL Mobile Hydraulic Power Unit excavator. The disassembly procedure outlines 28 steps to dismantle the various components of the travel motor. The assembly procedure describes 19 steps to reassemble the travel motor components in reverse order. Proper cleaning and installation of new seals and gaskets is emphasized throughout.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...kubei069369925
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...shanruliu7360
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...rishang96299
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...udjdkdkdmm
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31 step process involves removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other secured pieces. Cleanliness is important to prevent dirt contamination during disassembly.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...udjdkdkdmm
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual (SYM00001...km7seydwuhdw
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...fhhsjdkmem
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other fasteners. Cleanliness is important to prevent dirt from entering during disassembly. Weights of components are provided to assist with removal.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...fhhsjdkmem
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other fasteners. Cleanliness is important to prevent dirt from entering during disassembly. Weights of components are provided to assist with removal.
The document provides instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, carriers, seals and housings are then removed through a multi-step process using specialized tools. Detailed illustrations accompany each step to show how to remove, disassemble and extract the individual parts from the final drive assembly. Cleanliness is emphasized to prevent dirt from contaminating internal parts during the disassembly work.
The document provides step-by-step instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed individually using an assortment of tools. Detailed illustrations accompany each step to show how to properly disassemble the final drive. Cleanliness is emphasized to prevent dirt from entering the mechanism during reassembly.
The document provides step-by-step instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed individually using an assortment of tools. Detailed illustrations accompany each step to show how to properly disassemble the final drive. Cleanliness is emphasized to prevent dirt from entering the mechanism during reassembly.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...cdfzxs
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
The document provides instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, carriers, seals and housings are then removed through a multi-step process using specialized tools. Detailed illustrations accompany each step to show how to remove, disassemble and extract the individual parts from the final drive assembly. Cleanliness is emphasized to prevent dirt from contaminating internal parts during the disassembly work.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...idkkdkmdm
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal, with the total assembly weighing approximately 312 kg.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal.
This document provides instructions for disassembling the final drive of a 325D MH EXCAVATOR. It outlines 32 steps to remove components like the final drive cover, gears, carrier assemblies, housing, seals and bearings. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weight of components, and disassembling planetary gears within carrier assemblies.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...jfjskekdhnejd
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...fhhsjdkmem
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other fasteners. Cleanliness is important to prevent dirt from entering during disassembly. Weights of components are provided to assist with removal.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...fhhsjdkmem
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31-step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other fasteners. Cleanliness is important to prevent dirt from entering during disassembly. Weights of components are provided to assist with removal.
The document provides instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, carriers, seals and housings are then removed through a multi-step process using specialized tools. Detailed illustrations accompany each step to show how to remove, disassemble and extract the individual parts from the final drive assembly. Cleanliness is emphasized to prevent dirt from contaminating internal parts during the disassembly work.
The document provides step-by-step instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed individually using an assortment of tools. Detailed illustrations accompany each step to show how to properly disassemble the final drive. Cleanliness is emphasized to prevent dirt from entering the mechanism during reassembly.
The document provides step-by-step instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed individually using an assortment of tools. Detailed illustrations accompany each step to show how to properly disassemble the final drive. Cleanliness is emphasized to prevent dirt from entering the mechanism during reassembly.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...cdfzxs
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
The document provides instructions to disassemble a final drive on an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various components like gears, carriers, seals and housings are then removed through a multi-step process using specialized tools. Detailed illustrations accompany each step to show how to remove, disassemble and extract the individual parts from the final drive assembly. Cleanliness is emphasized to prevent dirt from contaminating internal parts during the disassembly work.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...idkkdkmdm
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal, with the total assembly weighing approximately 312 kg.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal.
This document provides instructions for disassembling the final drive of a 325D MH EXCAVATOR. It outlines 32 steps to remove components like the final drive cover, gears, carrier assemblies, housing, seals and bearings. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weight of components, and disassembling planetary gears within carrier assemblies.
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. Weights of components are provided to assist with removal.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...jfjskekdhnejd
This document provides instructions to disassemble a final drive on a 325D MH EXCAVATOR. It outlines 31 steps to remove components like the cover, gears, carrier assemblies, housing and seals. Special tools are required and cleanliness is important to prevent dirt from entering during reassembly. The procedure includes notes on alignment marks, weights of parts, and disassembling planetary gears within carrier assemblies.
Similar to Caterpillar Cat 329DL MOBILE HYD POWER UNIT Excavator (Prefix J8D) Service Repair Manual (J8D00001 and up).pdf (13)
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
2. Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 138-7575 Link Bracket 3
E 4C-8359 Eyebolt 2
F 138-7574 Link Bracket 2
G 138-7576 Link Bracket 2
Start By:
a. Start by removing the final drive. Refer to Disassembly and Assembly, "Final Drive -
Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled to the original locations.
Illustration 1 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto
Tooling (A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
3/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 2 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 3 g00892888
5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn.
Remove plugs (5) from cover (2).
Illustration 4 g00892906
6. Remove O-ring seals (7) from plugs (5).
4/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 5 g00892930
7. Remove gear (8) and spacer (9).
Illustration 6 g00892965
8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 7 g00892968
10. Remove retaining ring (15).
5/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 8 g00892975
11. Remove carrier assembly (16).
Illustration 9 g01389804
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 10 g00892977
6/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 13. Remove gear (17) and spacer (18).
Illustration 11 g00892997
14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 12 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 13 g00896860
16. Drive spring pin (23) into planetary shaft (22).
7/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 14 g00893043
17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 15 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 16 g01842853
20. Remove gear (27). Remove spacer (27A).
8/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 17 g01842974
21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 18 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 19 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
9/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 20 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 21 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring
gear (34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg
(146 lb).
Illustration 22 g01208542
10/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY ...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 27. Remove O-ring seal (36) from sprocket housing (35).
Illustration 23 g01208553
28. Remove bolts (37) from coupling gear (38).
Illustration 24 g01208572
29. Install suitable forcing bolts (39) in coupling gear (38). Tighten the forcing bolts evenly in
order to loosen coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 25 g01208578
11/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY ...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 26 g01208625
30. Remove shims (40) from the motor housing.
Note: Inner cones and outer bearing cones (42) are a slip fit on the motor housing. While
you remove sprocket housing (35) from the motor housing, inner bearing cone (42) may
stay with the sprocket housing or the inner bearing cone may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the
sprocket housing from the motor housing. The weight of sprocket housing (35) is
approximately 109 kg (240 lb).
Illustration 27 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing
cone.
12/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY ...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 28 g01208633
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If inner bearing cone (42) remained on the sprocket housing, then remove the inner bearing
cone.
37. Remove the bearing cups from the sprocket housing.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 16 22:25:41 UTC+0800 2020
13/13
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY ...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 329D L MOBILE HYD POWER UNIT J8D
Configuration: 329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8646-22 Publication Date -01/02/2015 Date Updated -12/09/2018
i04893712
Final Drive - Disassemble
SMCS - 4050-015
S/N - J8D1-UP
S/N - J9D1-UP
S/N - L5G1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P - 2420 Repair Stand 1
B 1U - 6400 Puller 1
C
5P - 8707 Plate 1
1P - 0520 Driver Group 1
5F - 7366 Forcing Bolt 1
8T - 0207 Bolt 2
3H - 0465 Puller Plate 2
1P - 5546 Cross Block 1
Start By:
a. Remove the final drive.
1/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g03034523
1. Secure final drive (3) to Tooling (A) The weight of the final drive is approximately 254 kg
(560 lb). Remove bolts (2) and housing (1). Remove O-ring seal from housing (1).
Illustration 2 g03034527
Illustration 3 g03034528
2. Remove retaining ring (4) and planet gear (5). If necessary, use Tooling (B) to remove
planet gears (5).
2/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 4 g03034530
3. Remove retaining ring (7) and planet gear carrier (6).
Illustration 5 g03034536
4. Remove sun gear (8).
Illustration 6 g03034556
5. Remove spacer (9) from sun gear (8).
3/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 7 g03034559
Illustration 8 g03034582
6. Remove sun gear (12) and remove retaining ring (10) and planet gears (11). If necessary,
use Tooling (B) to remove planet gears (11).
Illustration 9 g03034575
7. Remove retaining ring (13) and planet carrier (14).
4/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 10 g03034581
8. Remove sun gear (16) and remove bolt's (15).
Illustration 11 g03034598
9. Attach suitable lifting device to planet carrier (17). The weight of plant carrier is
approximately 32 kg (70 lb). Remove planet carrier (17).
Illustration 12 g03034599
10. Remove final drive (3) from Tooling (A). Place final drive (3) on floor. The weight of final
drive is approximately 163 kg (360 lb).Remove bolts (18) and flange (19).
5/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 13 g03034600
11. Use Tooling (C) to press down on the pushing disc (20), to remove retaining ring (21).
Illustration 14 g03034604
12. Remove springs (22) and brake shaft (23).
Illustration 15 g03034620
13. Remove piston (24).
6/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 16 g03034621
14. Remove plates (25) and discs (26) .
Note: Note the order at which the friction discs and plates are removed. For installation
purposes.
Illustration 17 g03034698
15. Remove O-ring seals (27), cap screws (28) and cover (29).
Illustration 18 g03034716
7/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 19 g03034718
16. Remove Duo-Cone seal (30) and Duo-Cone seal (31).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Apr 16 22:26:36 UTC+0800 2020
8/8
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Shutdown SIS
Previous Screen
Product: MOBILE HYD POWER UNIT
Model: 329D L MOBILE HYD POWER UNIT J8D
Configuration: 329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C7 Engine
Disassembly and Assembly
324D, 325D, 326D and 329D Excavators and 329D MHPU Mobile Hydraulic Power
Unit Machine Systems
Media Number -RENR8646-22 Publication Date -01/02/2015 Date Updated -12/09/2018
i06146847
Final Drive - Assemble
SMCS - 4050-016
S/N - A3R1022-UP
S/N - BFC1-UP
S/N - BYS1-UP
S/N - CYW1-UP
S/N - CZF1-UP
S/N - DBH380-UP
S/N - DJF1-UP
S/N - DTZ1-UP
S/N - EBM1-UP
S/N - EJC644-UP
S/N - GPB802-UP
S/N - J8D1-UP
S/N - J9D1-UP
S/N - JAT1-UP
S/N - JHJ1-UP
S/N - JJG814-UP
1/20
329D L Mobile Hydraulic Power Unit J8D00001-UP (MACHINE) POWERED BY C...
2020/4/16
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...