Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
2. Note: Cleanliness is an important factor. Before the disassembly procedure, clean the exterior of
the component . Cleaning will prevent dirt from entering the internal mechanism.
Note: Only the right pump control is equipped with the proportional reducing valve. The left
pump control starts with Step 4.
Illustration 1 g01200312
1. Remove bolts (2) , pump control (1) , and fitting (3) .
Illustration 2 g01202630
Right Pump Only
2. Remove bolts (4) . Remove proportional reducing valve (5) from pump control (1) .
4/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 3 g01202631
Right Pump Only
3. Remove O-ring seal (9) , O-ring seal (8) , O-ring seal (7) , and O-ring seal (6) from the
proportional reducing valve.
Illustration 4 g00706166
4. Remove nut (10) from the pump control.
5/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 5 g00882598
5. Measure the length of screw (13) for installation purposes. Remove screw (13) . Remove
bolts (11) . Remove cover (12) from the pump control.
Illustration 6 g00706177
6. Remove stopper (14) from the pump control.
Illustration 7 g00706179
7. Remove O-ring seal (15) and backup ring (16) from the stopper.
8. Repeat Step 4 through Step 7 for the other side of the pump control.
6/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. Illustration 8 g00706239
9. Place the pump control in a soft jawed vise. Support pin assembly (17) . Remove piston (18)
from the pump control. Remove pin assembly (17) from the pump control.
Illustration 9 g00706243
10. Remove dowel pin (19) from the pin.
Illustration 10 g00706249
7/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 11. Remove bolts (20) . Remove cover assembly (21) from the pump control.
Illustration 11 g00882599
Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
12. Remove O-ring seal (28) . Remove retainer (29) . Remove O-ring seal (27) from the
retainer. Remove nut (23) and nut (25) . Remove setscrew (22) . Remove adjuster (24) .
Remove O-ring seal (26) from the adjuster.
8/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 12 g00882601
13. Remove spring (30) and spring (31) from the pump control. Remove guide (32) from the
pump control. Remove ball (33) from the guide.
Illustration 13 g00706265
14. Remove pilot piston (34) from the pump control.
Illustration 14 g00706266
9/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP537...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Personal injury can result from parts and/or covers under spring
pressure.
Spring force will be released when covers are removed.
Be prepared to hold spring loaded covers as the bolts are loosened.
15. Remove bolts (35) . Remove cover (36) from the pump control.
Illustration 15 g00706267
16. Remove O-ring seal (37) from the cover.
Illustration 16 g00882608
17. Remove control piston (42) , spring (41) , spring (40) , spool (39) , and shims (38) from the
pump control.
10/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 17 g00706271
18. Remove pin (43) from the pump control.
Illustration 18 g00706272
19. Remove O-ring seal (44) from the pin.
11/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 19 g00706273
20. Remove sleeve (45) and control linkage (46) from the pump control.
Illustration 20 g00882609
21. Remove slide plate (47) and dowel (48) from the control linkage.
Illustration 21 g00706275
22. Remove plugs (49) . Remove three plugs (50) from the pump control.
12/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 22 g01200390
23. Use Tooling (A) to remove seal assembly (52) . Remove bolts (51) , bell housing (53) , and
the gasket.
Illustration 23 g01200392
24. Remove O-ring seal (54) and lip seal (55) from the seal assembly.
Illustration 24 g01200457
13/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. 25. Attach Tooling (C) and a suitable lifting device to head (10) . Remove bolts (56) and (57)
and head (58) . The weight of head (58) is approximately 41 kg (90 lb).
Illustration 25 g01200458
26. Remove caps (59) from nipples (62) . Remove nipples (62) , bolts (60) , and covers (61)
from head (58) .
Illustration 26 g01200459
27. Remove O-ring seal (63) from covers (61) .
14/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 27 g01200460
28. Use Tooling (D) to remove bearings (64) from the head.
Illustration 28 g01200462
29. Remove plugs (65) and (66) from head (58) .
Illustration 29 g01200471
30. Remove orifices (67) from head (58) .
15/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 30 g01200472
31. Remove O-ring seals (68) and (69) from pump housing (72) . Remove port plates (70) and
(71) .
Note: The port plates must be installed in the original position during assembly.
Illustration 31 g01200473
32. Remove plugs (73) , bolts (74) , and covers (75) from pump housing (72) .
16/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Illustration 32 g01200475
33. Remove plug (76) from covers (75) .
Illustration 33 g01200478
34. Remove O-ring seals (76) from pump housing (72) .
Illustration 34 g01200477
35. Remove plugs (79) , bolts (77) , and covers (78) from pump housing (72) .
17/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 35 g01200481
36. Remove O-ring seal (80) from covers (78) .
Illustration 36 g01200482
37. Remove barrel assemblies (81) and (82) from pump housing (72) .
Note: It may be necessary to use string to aid in the removal procedure. The barrel
assemblies must be installed in the original position during assembly.
18/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 37 g01200485
38. Mark piston assemblies (83) and barrel (84) for assembly. Remove piston assembly (83)
from barrel (84) .
Illustration 38 g01200486
39. Remove pistons (85) from piston plate (86) .
Illustration 39 g01200487
19/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 40. Remove cap (87) from barrel (84) .
Illustration 40 g01200488
41. Remove retainer (88) from barrel (84) .
Illustration 41 g01200491
42. Remove springs (89) from barrel (84) .
43. Repeat Step 38 through Step 42 for the remaining barrel assembly.
20/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Illustration 42 g01200492
Note: The pump has been removed from Tooling (B) for photographic purposes only.
44. Use Tooling (E) to remove retaining rings (90) .
Illustration 43 g01200494
45. Remove shaft assemblies (91) and (92) from pump housing (72) .
Illustration 44 g01200497
21/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. 46. Use Tooling (F) and a suitable press to remove bearing (93) from shaft assembly (91) .
Illustration 45 g01200498
47. Remove ring (94) from shaft assembly (91) .
Illustration 46 g01200501
48. Use Tooling (G) and a suitable press to remove bearing (95) from shaft assembly (91) .
22/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. Illustration 47 g03723277
49. Remove retaining ring (90) from shaft assembly (91) .
50. Repeat Step 46 through Step 49 for shaft (92) .
Illustration 48 g01200504
51. Remove swashplate assemblies (97) and (98) from pump housing (72) .
Note: The swashplate assemblies must be installed in the original position during assembly.
Illustration 49 g01200506
52. Remove plate (99) from swashplate assembly (97) .
23/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 50 g01200507
53. Remove bearings (100) from swashplate assembly (97) .
Illustration 51 g01200509
54. Remove dowel pins (101) from swashplate (97) .
Illustration 52 g01200510
55. Remove bearing (102) from swashplate (97) .
24/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 56. Repeat Step 52 through Step 55 for swashplate assembly (98) .
Illustration 53 g01200511
57. Remove bearings (103) from pump housing (72) .
Illustration 54 g01200512
58. Remove guide pins (104) from pump housing (72) .
25/26329D L Excavator RSK00001-UP (MACHINE) POWERED BY C7 Engine(SEBP5...
2020/3/3https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...