This document provides instructions for disassembling the final drive of an excavator. It begins by removing the final drive assembly from the machine and securing it to a repair stand. Various components like gears, shafts, seals and housings are then removed in 32 sequential steps. Detailed illustrations accompany each step to show how to use specialized tools to press, pull and separate parts. Cleanliness is emphasized to prevent dirt from contaminating internal mechanisms during disassembly.
Caterpillar cat 325 c l excavator (prefix bmm) service repair manual (bmm0000...fjkskedmme
The document provides step-by-step instructions to disassemble a final drive assembly for 325C and 325C L excavators. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, bearings and housings are then removed through 32 numbered steps. Cleanliness is emphasized to prevent dirt from entering components. Tools required are listed in a table.
Caterpillar cat 322 c excavator (prefix bfk) service repair manual (bfk00001 ...uujjfjjkskmme
This document provides instructions to disassemble the final drive of a 322C excavator. It outlines 32 steps to remove components such as gears, carriers, seals, and housings. Required tools include a transmission repair stand, link brackets, retaining ring pliers, and a spanner socket. Cleanliness is important to prevent dirt from entering during reassembly. Alignment marks should be made and parts reinstalled in their original locations.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fjkskedmme
The document provides instructions for disassembling a final drive component from an excavator. It lists the required tools and gives step-by-step instructions to remove the final drive housing, gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step. Disassembly involves removing retaining rings, gears, shafts, bearings, seals, and other parts from the housing using various tools, including a press, hammer, and pullers. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...fjsekkdmme
This document provides instructions to disassemble a 325D Material Handler final drive. It outlines 32 steps to fully remove and disassemble all components. Key steps include removing the final drive housing from the repair stand, disassembling the multiple gear assemblies within by removing retaining rings and shafts, and pressing bearings from the various carrier assemblies. Special tools are required and cleanliness is important to prevent dirt ingress during disassembly.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fjjskekdmme
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the cover, carrier assemblies, ring gear, and other internal parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and refitting the sprocket housing and other components. Tools required are also listed.
1) The document provides disassembly instructions for the final drive on 325 and 325L excavators. It describes removing over 30 parts in multiple steps, requiring various tools.
2) Key steps include removing the final drive cover, ring gear, carrier assemblies, planetary gears, seals, and bearings from the main housing. Detailed illustrations supplement each step.
3) Cleanliness is important during disassembly to prevent dirt from entering the mechanism. Parts must be reinstalled in their original locations and orientations.
Caterpillar cat 345 c excavator (prefix wde) service repair manual (wde00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 28 parts in 28 steps, including removing the final drive cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure involves installing 29 parts in 29 steps in the reverse order, adjusting bearing preload using shims, and applying anti-seize compound and thread lock to ensure proper assembly. Tools such as retaining ring pliers, eyebolts, and a transmission stand are required.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 325 c l excavator (prefix bmm) service repair manual (bmm0000...fjkskedmme
The document provides step-by-step instructions to disassemble a final drive assembly for 325C and 325C L excavators. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, bearings and housings are then removed through 32 numbered steps. Cleanliness is emphasized to prevent dirt from entering components. Tools required are listed in a table.
Caterpillar cat 322 c excavator (prefix bfk) service repair manual (bfk00001 ...uujjfjjkskmme
This document provides instructions to disassemble the final drive of a 322C excavator. It outlines 32 steps to remove components such as gears, carriers, seals, and housings. Required tools include a transmission repair stand, link brackets, retaining ring pliers, and a spanner socket. Cleanliness is important to prevent dirt from entering during reassembly. Alignment marks should be made and parts reinstalled in their original locations.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fjkskedmme
The document provides instructions for disassembling a final drive component from an excavator. It lists the required tools and gives step-by-step instructions to remove the final drive housing, gears, shafts, seals, and other internal parts. Detailed illustrations accompany each step. Disassembly involves removing retaining rings, gears, shafts, bearings, seals, and other parts from the housing using various tools, including a press, hammer, and pullers. Cleanliness is emphasized to prevent dirt from entering during disassembly.
Caterpillar cat 325 d mh excavator (prefix c4h) service repair manual (c4h000...fjsekkdmme
This document provides instructions to disassemble a 325D Material Handler final drive. It outlines 32 steps to fully remove and disassemble all components. Key steps include removing the final drive housing from the repair stand, disassembling the multiple gear assemblies within by removing retaining rings and shafts, and pressing bearings from the various carrier assemblies. Special tools are required and cleanliness is important to prevent dirt ingress during disassembly.
Caterpillar cat 345 d excavator (prefix neg) service repair manual (neg00001 ...fjjskekdmme
This document provides disassembly and assembly instructions for the final drive of a 345D excavator. It details 30 steps to disassemble the final drive components including removing the cover, carrier assemblies, ring gear, and other internal parts. It then lists 21 steps for reassembling the final drive, including pressing in bearing cups, installing bearing cones and inner races, and refitting the sprocket housing and other components. Tools required are also listed.
1) The document provides disassembly instructions for the final drive on 325 and 325L excavators. It describes removing over 30 parts in multiple steps, requiring various tools.
2) Key steps include removing the final drive cover, ring gear, carrier assemblies, planetary gears, seals, and bearings from the main housing. Detailed illustrations supplement each step.
3) Cleanliness is important during disassembly to prevent dirt from entering the mechanism. Parts must be reinstalled in their original locations and orientations.
Caterpillar cat 345 c excavator (prefix wde) service repair manual (wde00001 ...fjsekdmmeed
This document provides instructions for disassembling and assembling the final drive of a 345C excavator. The disassembly procedure involves removing 28 parts in 28 steps, including removing the final drive cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure involves installing 29 parts in 29 steps in the reverse order, adjusting bearing preload using shims, and applying anti-seize compound and thread lock to ensure proper assembly. Tools such as retaining ring pliers, eyebolts, and a transmission stand are required.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 325 c l excavator (prefix bmm) service repair manual (bmm0000...fjskeazqkkdmme
The document provides step-by-step instructions to disassemble a final drive assembly for a 325C excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, plates, and housings are then removed through 32 numbered steps. Key components taken apart include the drive cover, three planetary gear carrier assemblies, and a pair of connected ring gears. Cleanliness is emphasized to prevent dirt intrusion during reassembly.
Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 ...ifosodkmsme
The document provides step-by-step instructions to disassemble a final drive assembly for a 325C excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, bearings and housings are then removed through 32 numbered steps. Cleanliness is emphasized to prevent dirt from entering internal components. Tools required are listed in a table.
Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 ...fjskekdmjekm
The document provides step-by-step instructions to disassemble a final drive assembly for an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, spacers, seals and housings are then removed through 32 numbered steps. Tools required are listed in a table. Cleanliness is emphasized to prevent dirt from entering internal parts during disassembly.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken when using tools to separate components and remove retaining rings, seals, and bearings from inside the final drive assembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f7fujksekmdm8u
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
Massey ferguson mf 788 combine parts catalogue manualfjjskejdmdn
This document contains parts listings and descriptions for a Massey Ferguson MF 788 combine diesel engine. It includes sections for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, timing gear, lubricating oil sump, lubricating oil filter, and other engine parts. The listings provide part numbers, quantities, descriptions, and assembly/component details for each part.
Massey ferguson mf 625 combines parts catalogue manualfjjskejdmdn
This document contains parts lists and technical specifications for Massey Ferguson MF 620/625 combines. It includes lists of parts, part numbers, quantities and descriptions for the cylinder block, cylinder head, crankshaft, and cylinder head cover. Each part is accompanied by additional details like serial number ranges and replacement part numbers.
Massey ferguson mf 620 combines parts catalogue manualfjjskejdmdn
This document contains parts lists and technical specifications for Massey Ferguson MF 620/625 combines. It includes lists of parts, part numbers, quantities and descriptions for the cylinder block, cylinder head, crankshaft, and cylinder head cover. Notes are provided on application and replacement of certain parts based on the combine's serial number or engine number.
Massey ferguson mf 515 combines (gb) parts catalogue manualfjjskejdmdn
The document provides parts listings and technical specifications for components of Massey Ferguson 510/515 combines. It includes lists of parts, part numbers, quantities and other identifying information for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear of MF 510/515 combines. Notes are provided to indicate application details for some parts.
Massey ferguson mf 510 combines (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for a Massey Ferguson MF 510/515 combine, including the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear. It lists over 100 individual part numbers, quantities, descriptions, and other identifying information organized into sections for each component or assembly.
Massey ferguson mf 500 combine (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for the cylinder block, cylinder head, crankshaft, and cylinder head cover of a Massey Ferguson MF 500 combine. It includes lists of parts with part numbers, quantities, descriptions, and notes on application and serial number ranges. Key assemblies like the cylinder block, head, crankshaft, and head cover can be ordered, and individual parts like pistons, rods, bearings, gaskets, and seals are also listed. Notes provide additional details on part application and changes over different serial number ranges.
Massey ferguson mf 430 combine parts catalogue manualfjjskejdmdn
This document provides a parts list for a Massey Ferguson 430 combine. It includes 3 tables of contents that list various systems of the combine including the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction and exhaust system, timing gear, and lubricating oil sump. Each system lists the relevant parts, part numbers, quantities, and additional part details.
Massey ferguson mf 415 combines parts catalogue manualfjjskejdmdn
This document provides part numbers and descriptions for components of the lubricating oil sump for Massey Ferguson MF 410/415 combines. It includes over 80 numbered items that make up the sump assembly, such as the sump, gaskets, bolts, gears, strainers, pumps, pipes, unions and other components. Precise part numbers are given to allow for ordering replacements. Notes provide additional details for some parts, such as applicable serial number ranges.
Massey ferguson mf 410 combines parts catalogue manualfjjskejdmdn
This document provides part numbers and descriptions for components of the lubricating oil sump for Massey Ferguson MF 410/415 combines. It includes over 80 numbered items that make up the sump assembly, such as the sump, gaskets, bolts, gears, strainers, pumps, pipes, unions and other components. Precise part numbers are given to allow for ordering replacements. Notes provide additional details for some parts, such as applicable serial number ranges.
Massey ferguson mf 400 combine (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for a Massey Ferguson MF 400 combine engine. It includes lists of parts for various engine systems like the cylinder block, crankshaft, cylinder head cover, and lubricating oil sump. Each part is identified by number, description, and any relevant comments on application or changes over time. The parts lists contain technical specifications to aid in maintenance and repair of the engine.
Massey ferguson mf 330 combine parts catalogue manualfjjskejdmdn
This document provides a parts list for the cylinder block of a Massey Ferguson MF 330 combine. It contains 46 numbered items including the cylinder block, liners, plugs, bolts, and other components. Each item lists the part number, quantity, description, and any relevant comments. Tolerances or fits are indicated with an "X" next to the part number.
More Related Content
Similar to Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 and up)
Caterpillar cat 325 c l excavator (prefix bmm) service repair manual (bmm0000...fjskeazqkkdmme
The document provides step-by-step instructions to disassemble a final drive assembly for a 325C excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, plates, and housings are then removed through 32 numbered steps. Key components taken apart include the drive cover, three planetary gear carrier assemblies, and a pair of connected ring gears. Cleanliness is emphasized to prevent dirt intrusion during reassembly.
Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 ...ifosodkmsme
The document provides step-by-step instructions to disassemble a final drive assembly for a 325C excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, seals, bearings and housings are then removed through 32 numbered steps. Cleanliness is emphasized to prevent dirt from entering internal components. Tools required are listed in a table.
Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 ...fjskekdmjekm
The document provides step-by-step instructions to disassemble a final drive assembly for an excavator. It begins by removing the final drive from the machine and securing it to a repair stand. Various gears, spacers, seals and housings are then removed through 32 numbered steps. Tools required are listed in a table. Cleanliness is emphasized to prevent dirt from entering internal parts during disassembly.
Caterpillar cat 325 c excavator (prefix jld) service repair manual (jld00001 ...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...fijsekkdmdm2w
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts noted. Care must be taken due to the weights involved, with the final drive assembly weighing approximately 688 pounds and other parts ranging from 70 to 220 pounds.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...fhsejkdkmen
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C and 325C L Excavator (Prefix JLD) Service Repair Manual ...zan2736ban
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, carrier assemblies, and other components. Alignment marks should be made and weights of parts provided, as some components like the housing weigh over 100kg. Care must be taken when using tools to separate components and remove retaining rings, seals, and bearings from inside the final drive assembly.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f8uesjdkdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is largely the reverse of the disassembly steps and involves applying sealants and lubricants before reinstalling components.
Caterpillar cat 325 c l excavator (prefix jld) service repair manual (jld0000...ikdkkdmdmdm
The document provides instructions for disassembling and assembling the final drive of a 325C excavator. It lists required tools and gives step-by-step directions to remove and disassemble components of the final drive such as gears, carriers, shafts, and housings. Cleanliness is emphasized throughout. The assembly procedure is a reversal of the disassembly steps and involves applying sealants and lubricants to components before reinstalling them.
Caterpillar Cat 325C L Excavator (Prefix JLD) Service Repair Manual (JLD00001...f7fujksekmdm8u
The document provides instructions for disassembling and removing the final drive from a 325C excavator. It lists the required tools and gives step-by-step details on removing the final drive housing, gears, shafts, and other components. Alignment marks should be made and weights of parts provided, as the components must be reinstalled in their original locations. Careful cleaning is important to prevent dirt from entering the mechanism during disassembly.
Similar to Caterpillar cat 325 c excavator (prefix bmm) service repair manual (bmm00001 and up) (11)
Massey ferguson mf 788 combine parts catalogue manualfjjskejdmdn
This document contains parts listings and descriptions for a Massey Ferguson MF 788 combine diesel engine. It includes sections for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, timing gear, lubricating oil sump, lubricating oil filter, and other engine parts. The listings provide part numbers, quantities, descriptions, and assembly/component details for each part.
Massey ferguson mf 625 combines parts catalogue manualfjjskejdmdn
This document contains parts lists and technical specifications for Massey Ferguson MF 620/625 combines. It includes lists of parts, part numbers, quantities and descriptions for the cylinder block, cylinder head, crankshaft, and cylinder head cover. Each part is accompanied by additional details like serial number ranges and replacement part numbers.
Massey ferguson mf 620 combines parts catalogue manualfjjskejdmdn
This document contains parts lists and technical specifications for Massey Ferguson MF 620/625 combines. It includes lists of parts, part numbers, quantities and descriptions for the cylinder block, cylinder head, crankshaft, and cylinder head cover. Notes are provided on application and replacement of certain parts based on the combine's serial number or engine number.
Massey ferguson mf 515 combines (gb) parts catalogue manualfjjskejdmdn
The document provides parts listings and technical specifications for components of Massey Ferguson 510/515 combines. It includes lists of parts, part numbers, quantities and other identifying information for the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear of MF 510/515 combines. Notes are provided to indicate application details for some parts.
Massey ferguson mf 510 combines (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for a Massey Ferguson MF 510/515 combine, including the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction system, and timing gear. It lists over 100 individual part numbers, quantities, descriptions, and other identifying information organized into sections for each component or assembly.
Massey ferguson mf 500 combine (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for the cylinder block, cylinder head, crankshaft, and cylinder head cover of a Massey Ferguson MF 500 combine. It includes lists of parts with part numbers, quantities, descriptions, and notes on application and serial number ranges. Key assemblies like the cylinder block, head, crankshaft, and head cover can be ordered, and individual parts like pistons, rods, bearings, gaskets, and seals are also listed. Notes provide additional details on part application and changes over different serial number ranges.
Massey ferguson mf 430 combine parts catalogue manualfjjskejdmdn
This document provides a parts list for a Massey Ferguson 430 combine. It includes 3 tables of contents that list various systems of the combine including the cylinder block, cylinder head, crankshaft, cylinder head cover, air induction and exhaust system, timing gear, and lubricating oil sump. Each system lists the relevant parts, part numbers, quantities, and additional part details.
Massey ferguson mf 415 combines parts catalogue manualfjjskejdmdn
This document provides part numbers and descriptions for components of the lubricating oil sump for Massey Ferguson MF 410/415 combines. It includes over 80 numbered items that make up the sump assembly, such as the sump, gaskets, bolts, gears, strainers, pumps, pipes, unions and other components. Precise part numbers are given to allow for ordering replacements. Notes provide additional details for some parts, such as applicable serial number ranges.
Massey ferguson mf 410 combines parts catalogue manualfjjskejdmdn
This document provides part numbers and descriptions for components of the lubricating oil sump for Massey Ferguson MF 410/415 combines. It includes over 80 numbered items that make up the sump assembly, such as the sump, gaskets, bolts, gears, strainers, pumps, pipes, unions and other components. Precise part numbers are given to allow for ordering replacements. Notes provide additional details for some parts, such as applicable serial number ranges.
Massey ferguson mf 400 combine (gb) parts catalogue manualfjjskejdmdn
This document provides parts information for a Massey Ferguson MF 400 combine engine. It includes lists of parts for various engine systems like the cylinder block, crankshaft, cylinder head cover, and lubricating oil sump. Each part is identified by number, description, and any relevant comments on application or changes over time. The parts lists contain technical specifications to aid in maintenance and repair of the engine.
Massey ferguson mf 330 combine parts catalogue manualfjjskejdmdn
This document provides a parts list for the cylinder block of a Massey Ferguson MF 330 combine. It contains 46 numbered items including the cylinder block, liners, plugs, bolts, and other components. Each item lists the part number, quantity, description, and any relevant comments. Tolerances or fits are indicated with an "X" next to the part number.
Massey ferguson mf 290 tractor, 387020 (gb) parts catalogue manualfjjskejdmdn
The document contains detailed parts lists and diagrams for components of a Massey Ferguson MF 290 tractor engine. It lists 56 items that make up the timing gear assembly of an A4 248 engine, including the camshaft, gears, covers, joints, screws, washers, and other individual parts. Similar details are provided for other engine assemblies like the cylinder block, cylinder head, crankshaft, air induction/exhaust systems, and cylinder head cover. The document acts as a service or repair manual containing precise part numbers and descriptions for replacing or servicing parts of the MF 290 tractor engine.
Massey ferguson mf 265 tractor, 193552 (gb) parts catalogue manualfjjskejdmdn
The document contains parts lists and technical specifications for components of a Massey Ferguson MF 265 tractor engine. It lists over 30 individual components of the engine including the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear and camshaft. Each component item is accompanied by part numbers, quantities, descriptions and any relevant comments. The level of technical detail provided suggests this is a service or repair document for mechanics working on this engine.
The document provides parts listings and descriptions for various components of a Massey Ferguson 240 tractor, including the engine, cylinder block, crankshaft, pistons, connecting rods, and cylinder head. It includes the part numbers, quantities, descriptions, and additional comments for over 50 individual parts.
Massey ferguson mf 240 tractor, 522353 (gb) parts catalogue manualfjjskejdmdn
The document appears to be parts lists and technical specifications for a Massey Ferguson MF 240 tractor. It includes lists of over 60 individual parts for components like the cylinder block, cylinder head, crankshaft, and timing gear. Each part is given an item number, part number, quantity, description, and sometimes additional comments or specifications.
Massey ferguson 1760 m compact tractor parts catalogue manualfjjskejdmdn
The document is a table of contents and service manual sections for a Massey Ferguson 1760M compact tractor. It includes sections on the engine and fuel systems, steering, drivetrain, brakes, hydraulics, electrical systems, cab, chassis, decals, wheels, implement lift system and accessories. Each section includes detailed part listings, diagrams and specifications for repairing and servicing the tractor systems.
Massey ferguson 1755 m compact tractor parts catalogue manualfjjskejdmdn
The document provides a table of contents and technical specifications for the Massey Ferguson 1755M compact tractor. It lists 12 systems of the tractor, including the engine and fuel system, steering system, drive train system, and more. Each system section includes detailed part listings, diagrams, and specifications for repair and maintenance of the tractor.
Claas temis 650 z (type t05) tractor service repair manualfjjskejdmdn
This document provides instructions for removing and installing gearbox casings and components for three types of TEMIS gearboxes. It describes:
1) Removing and installing input housing covers, main gearbox covers, and the top cover.
2) Adjusting the gear and range control levers during top cover installation.
3) Key components of the selecter rails and forks such as the forks, liners, and locking pins.
4) The gear and range controls for each gearbox type, which include mechanical levers and electro-hydraulic controls.
Claas temis 650 x (type t05) tractor service repair manualfjjskejdmdn
This document provides instructions for removing and installing various components of three different gearbox models: B13.25, B13.29, and B13.35. It describes the controls for each gearbox and provides an exploded view diagram and key. The main steps outlined are:
1. Remove the input housing and disconnect the rear axle from the main gearbox.
2. Remove the main gearbox top cover to access the selector rails and forks.
3. Mark selector positions and loosen locking bolts and wires on forks and selectors.
4. Disconnect switches and extract push buttons and balls to remove selector rails.
Claas temis 650 rx (type t05) tractor service repair manualfjjskejdmdn
This document provides instructions for removing and installing gearbox casings and components for three types of TEMIS gearboxes. It describes:
1) Removing and installing input housing covers, main gearbox covers, and the top cover.
2) Adjusting the gear and range control levers during top cover installation.
3) Key components of the selecter rails and forks such as the forks, liners, and locking pins.
4) The gear and range controls for each gearbox type, which include mechanical levers and electro-hydraulic controls.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C L EXCAVATOR BMM
Configuration: 325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i04758849
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure (227-6116)
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 194-3878 Spanner Socket 1
E 138-7574 Link Bracket 2
F
5F-7366 Forcing Screw 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
G
1U-7600 Slide Hammer Puller Gp 1
8T-0266 Bolt 1
1/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Start By:
A. Remove the final drive. Refer to Disassembly and Assembly, "Final Drive - Remove".
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of
the component should be thoroughly cleaned. This will prevent dirt from entering the
internal mechanism.
Note: Some of the images that are in this procedure do not show the sprocket assembly that
is attached to the final drive housing. If necessary, the weights that are given include the
weight of the sprocket assembly.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the part's original locations.
Illustration 1 g00708089
2. Fasten the final drive to Tooling (A), as shown. The weight of the final drive assembly is
approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
2/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Remove the setscrews from the cover. Fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. Remove the cover. The weight of the cover is approximately 32 kg (70
lb).
Illustration 3 g00879362
5. Remove bolts (3). Remove gear (5). Check plate (6). Replace plate (6) if wear is shown.
Remove plugs (4) from cover (2) .
Illustration 4 g00879365
6. Remove O-ring seal (7) from plugs (4) .
3/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 5 g00780428
7. Remove gear (8). Remove spacer (9) .
Illustration 6 g00780432
8. Remove retaining ring (10) with Tooling (C). Remove washer (11). Remove gear (12).
Remove bearing assembly (13). Remove second washer (11) .
9. Repeat Step 8 for the remaining two gear assemblies.
4/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 7 g00781401
10. Remove retaining ring (14) .
Illustration 8 g00781407
11. Remove carrier assembly (15) .
Illustration 9 g01389593
12. Use a suitable press in order to remove the shafts from carrier assembly (15) .
5/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 16. Disassemble carrier assembly (19), as follows.
a. Drive spring pin (20) into planetary shaft (21) with a hammer and a punch.
Illustration 13 g00781476
b. Remove planetary shaft (21) .
c. Remove spring pin (20) from planetary shaft (21) with a hammer and a punch.
Illustration 14 g00781516
d. Remove thrust washers (22) and planetary gear (24) from the carrier assembly.
e. Remove bearing (23) from planetary gear (24) .
17. Repeat Steps 16.a through 16.e for the other two planetary.
7/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 15 g00781529
18. Remove gear (25). Remove spacer (26) .
Illustration 16 g00781559
19. Remove carrier assembly (27) .
20. Use two people to remove carrier assembly (27). The weight of the carrier assembly is
approximately 38 kg (85 lb).
21. Disassemble carrier assembly (27), as follows.
8/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00781719
a. Drive spring pin (29) into planetary shaft (28) with a hammer and a punch.
Illustration 18 g00781601
b. Remove planetary shaft (28) .
c. Remove spring pin (29) from planetary shaft (28) with a hammer and a punch.
Illustration 19 g00781607
d. Remove thrust washers (30) and planetary gear (32) from the carrier assembly.
e. Remove two bearings (31) from the planetary gear.
22. Repeat Steps 21.a through 21.e for the other two planetary gears.
9/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 20 g00781730
23. Use two people to remove gear (33). The weight of gear is approximately 41 kg (90 lb).
Illustration 21 g00781807
24. Remove O-ring seal (34) .
Illustration 22 g01147650
25. Remove bolts (35A) and plates (35B) .
10/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 23 g01147651
26. Use Tooling (G) to remove dowel (37) from stopper plate (35) .
Illustration 24 g01147759
27. Secure Tooling (D) to stopper plate (35). Use Tooling (D) to remove stopper plate (35) .
11/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 25 g01147930
28. Use Tooling (E) and a suitable lifting device to remove housing (36). The weight of housing
(36) is approximately 100 kg (220 lb).
Illustration 26 g01147951
29. Remove Duo-Cone seal (39A) from housing (38) .
Illustration 27 g01147975
12/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 28 g01147934
30. Remove Duo-Cone seal (39B) from housing (36) .
31. Use Tooling (F) in order to remove bearings (40) and (41) from housing (36) .
32. If necessary, remove the final drive sprocket from the sprocket housing. Refer to
Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 11:25:14 UTC+0800 2020
13/13
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C L EXCAVATOR BMM
Configuration: 325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i05453130
Final Drive - Disassemble
SMCS - 4050-015
S/N - BKW1-UP
S/N - BMM1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3938 Link Bracket 2
C 154-6181 Forcing Bolt 1
D 439-3940 Link Bracket 2
E
5F-7366 Forcing Bolt 1
1P-5546 Crossblock 1
1U-9889 Crossblock 1
1P-0520 Driver Group 1
6V-7888 Puller Leg 2
1H-3112 Puller Assembly 1
1P-5551 Adjustable Screw Assembly 1
F - Loctite 5127 1
1/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Start By:
a. Remove the final drive.
Note: Cleanliness is an important factor. Before the disassembly procedure, thoroughly
clean the exterior of the component. This action will prevent dirt from entering the internal
mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The
parts must be reinstalled in the original locations.
Illustration 1 g00708089
2. Fasten the final drive to Tooling (A), as shown. The combined weight of the final drive and
final drive sprocket is approximately 312 kg (688 lb).
3. Remove bolts (1) and the washers that hold the cover in position.
Illustration 2 g00708090
4. Remove the setscrews from cover (2), and fasten Tooling (B) and a suitable lifting device to
cover (2), as shown. The weight of cover (2) is approximately 32 kg (70 lb). Remove cover
(2).
2/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 3 g00708091
5. Remove thrust plate (3) from cover (2).
6. Remove plugs (4) from cover (2).
Illustration 4 g00708235
7. Remove O-ring seals (5) from both plugs (4) that were in the cover.
Illustration 5 g00708092
8. Remove spacer (6) from carrier assembly (7).
9. Remove sun gear (8) from carrier assembly (7).
3/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 10. Remove carrier assembly (7) by lifting the carrier assembly straight up. The weight of
carrier assembly (7) is approximately 14 kg (30 lb).
Illustration 6 g01304883
11. Disassemble carrier assembly (7), as follows.
a. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
Illustration 7 g00708144
b. Remove planetary shaft (9) with spring pin (10) from the carrier assembly.
c. Remove spring pin (10) from planetary shaft (9) with a hammer and a punch.
4/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 8 g00708218
d. Remove thrust washers (11) and planetary gear (13) from the carrier assembly.
e. Remove bearing (12) from planetary gear (13).
12. Repeat Steps 11.a through 11.e in order to remove the remaining planetary gears from the
carrier assembly.
Illustration 9 g00708162
13. Remove sun gear (14) from carrier assembly (15).
Illustration 10 g00708325
14. Remove spacer (16).
5/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 11 g00708184
Note: It will be necessary to pry ring gears (17) away from main housing (18) in order to
install the lifting slings.
15. Fasten a suitable lifting device to ring gears (17), as shown. Remove the ring gears from
main housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
Illustration 12 g00708360
16. Use a screwdriver or a chisel in order to separate two ring gears (17).
Note: Two ring gears (17) are held together with Tooling (F). It may be necessary to heat
ring gears (17) in order to soften the sealant. Do not heat over 135 °C (275 °F) for more
than thirty minutes.
6/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 13 g00708172
17. Position a 12.7 mm (0.50 inch) shackle under carrier assembly (15).
18. Fasten a suitable lifting device to the shackle.
19. Slowly lift carrier assembly (15) from the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Disassemble carrier assembly (15), as follows.
Illustration 14 g00708175
a. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
7/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 15 g00708370
Illustration 16 g00708220
b. Remove planetary shaft (19) with spring pin (20) from the carrier assembly.
c. Remove spring pin (20) from planetary shaft (19) with a hammer and a punch.
d. Remove thrust washers (21) and planetary gear (23) from the carrier assembly.
e. Remove bearings (22) from planetary gear (23).
21. Repeat Steps 20.a through 20.e in order to remove the remaining planetary gears from the
carrier.
Illustration 17 g00708186
22. Remove O-ring seal (24) from main housing (18).
8/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 18 g00708187
23. Remove bolts (25) from gear (26).
Illustration 19 g00708202
24. Use Tooling (C) in order to remove gear (26) from main housing (18).
Note: The motor housing will separate from main housing (18) once gear (26) is removed.
Make sure that the motor housing is supported.
Illustration 20 g00708211
25. Remove shims (27) from the main housing.
9/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 21 g00708212
26. Fasten Tooling (D) and a suitable lifting device to main housing (18), as shown.
27. Use a hammer and a punch in order to separate main housing (18) and the final drive
sprocket from motor housing (28). The combined weight of main housing (18) and the final
drive sprocket is approximately 82 kg (180 lb).
Illustration 22 g00708214
28. Remove Duo-Cone seal (29) from motor housing (28).
29. Remove alignment pins (30).
10/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Illustration 23 g00708215
Illustration 24 g00708216
30. Remove Duo-Cone seal (31) from main housing (18).
31. Use Tooling (E) in order to remove bearings (32) and (33) from the main housing.
32. If necessary, remove the final drive sprocket from the main housing.
33. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 27 11:26:10 UTC+0800 2020
11/11
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B ...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 325C L EXCAVATOR BMM
Configuration: 325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B Engine
Disassembly and Assembly
325C Excavator Machine Systems
Media Number -RENR5367-11 Publication Date -01/01/2012 Date Updated -17/02/2017
i04758848
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure (227-6116)
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 138-7573 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D
194-3878 Spanner Wrench As 1
194-3884 Spacer 1
E 138-7574 Link Bracket 2
H 6V-7030 Micrometer Depth Gauge Group 1
J FT-2770 Leak Down Test Tool 1
K 1U-6396 O-Ring Assembly Compound 1
L 5P-3931 Anti-Seize Compound 1
M 1U-8846 Gasket Sealant 1
N 8T-0531 Duo-Cone Seal Installer As 1
P 5P-3931 Anti-Seize Compound 1
Q 240-1886 Drill Fixture Gp 1
R 9S-3263 Thread Lock Compound 1
1/19
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Note: Cleanliness is an important factor. Before assembly, clean all parts thoroughly in cleaning
fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be
deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or
damaged, use new parts for replacement. All disassembly and all assembly procedures must be
performed on a clean work surface and in a clean hydraulic area. Keep cleaned parts covered and
protected at all times.
Note: O-ring seals, gaskets, and seals should always be replaced. A used O-ring seal may not have
the same sealing properties as a new O-ring. Use Tooling (K) during the assembly procedure.
Note: Apply a light film of hydraulic oil to all components before assembly.
Note: Some of the images that are in this procedure do not show the sprocket assembly that is
attached to the final drive housing. If necessary, the weights that are given include the weight of
the sprocket assembly.
Illustration 1 g01147975
1. Apply Tooling (P) to the outer diameter of the bearings.
2. Use a suitable press to Install bearings (40) and (41). Make sure that bearing (41) and
bearing (40) contact the counterbore in housing (36) .
3. Use Tooling (N) to install Duo-Cone seal (39B) .
2/19
325C & 325C L Excavators BMM00001-UP (MACHINE) POWERED BY 3126B En...
2020/6/27
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...