The document provides step-by-step instructions for disassembling and assembling a travel motor. Key steps include using various tools to remove the head, brake piston, rotating assembly, seals and other components. Assembly involves reversing the removal steps and ensuring proper installation of components like springs, seals, plates and bearing races in their correct positions and with lubrication.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly with 28 steps and provides guidance on cleaning, lubricating, and installing components in the correct orientation. Tools required include retaining ring pliers, drivers, pullers, and adapters to securely hold components during disassembly and assembly.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...kubei069369925
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...8ufjsekddm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and ensure proper alignment of parts like the cam plate and piston assemblies.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f7fujksekmdm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and torque specifications for fasteners.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly with 28 steps and provides guidance on cleaning, lubricating, and installing components in the correct orientation. Tools required include retaining ring pliers, drivers, pullers, and adapters to securely hold components during disassembly and assembly.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...kubei069369925
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...8ufjsekddm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and ensure proper alignment of parts like the cam plate and piston assemblies.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f7fujksekmdm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and torque specifications for fasteners.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...jdkskmdmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing using various tools over the course of 21 steps. Precise alignment and lubrication of parts is emphasized to ensure proper reassembly.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...shanruliu7360
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...prmy389342
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...rishang96299
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...ufjksemd8ujd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...idkkdkmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...idkkdkmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual (JCZ00001...shudun96087
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like pistons, plates, seals.
2. Using specialized tools to pull bearings and races from the shaft and housing.
3. Reassembling the components in reverse order, making sure to lubricate seals and mating surfaces, and aligning parts properly. Precise reinstallation of pieces is emphasized.
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like seals, plates, pistons.
2. Using pullers and presses to remove bearing races and other press-fit parts.
3. Reassembling the travel motor by pressing in new bearings, installing springs, seals and other components in the reverse order of removal. Lubrication and proper positioning of parts is emphasized.
Caterpillar Cat 336D2 L Excavator (Prefix ELR) Service Repair Manual (ELR0000...kesi7153062
This document provides instructions for removing and installing the unit injector hydraulic pump on Caterpillar C9 engines. The removal process involves disconnecting fuel lines and electrical connections, removing mounting bolts, and taking out the pump. Installation is the reverse, applying a new O-ring seal and reconnecting all lines. Proper cleaning and containment of fluids is emphasized. The document outlines procedures for both non-dual and dual tapered roller bearing pump types.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...kesi7153062
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
More Related Content
Similar to Caterpillar Cat 324E LN Excavator (Prefix LDG) Service Repair Manual (LDG00001 and up).pdf
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...jdkskmdmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing using various tools over the course of 21 steps. Precise alignment and lubrication of parts is emphasized to ensure proper reassembly.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...shanruliu7360
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...prmy389342
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...rishang96299
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...ufjksemd8ujd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...idkkdkmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...idkkdkmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual (JCZ00001...shudun96087
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like pistons, plates, seals.
2. Using specialized tools to pull bearings and races from the shaft and housing.
3. Reassembling the components in reverse order, making sure to lubricate seals and mating surfaces, and aligning parts properly. Precise reinstallation of pieces is emphasized.
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like seals, plates, pistons.
2. Using pullers and presses to remove bearing races and other press-fit parts.
3. Reassembling the travel motor by pressing in new bearings, installing springs, seals and other components in the reverse order of removal. Lubrication and proper positioning of parts is emphasized.
Similar to Caterpillar Cat 324E LN Excavator (Prefix LDG) Service Repair Manual (LDG00001 and up).pdf (20)
Caterpillar Cat 336D2 L Excavator (Prefix ELR) Service Repair Manual (ELR0000...kesi7153062
This document provides instructions for removing and installing the unit injector hydraulic pump on Caterpillar C9 engines. The removal process involves disconnecting fuel lines and electrical connections, removing mounting bolts, and taking out the pump. Installation is the reverse, applying a new O-ring seal and reconnecting all lines. Proper cleaning and containment of fluids is emphasized. The document outlines procedures for both non-dual and dual tapered roller bearing pump types.
Caterpillar Cat 336D2 L Excavator (Prefix EF3) Service Repair Manual (EF30000...kesi7153062
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
Caterpillar Cat 336D2 L Excavator (Prefix DGR) Service Repair Manual (DGR0000...kesi7153062
This document provides instructions for installing and removing unit injector sleeves on a Caterpillar C9 engine. It outlines the required tools and multi-step procedures for cleaning and preparing the sleeves and cylinder head, installing new seals, and using specialty tools to correctly position and secure the sleeves. Special care must be taken to avoid contaminating parts and ensure proper installation of seals to prevent oil leakage and engine performance issues.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 336D2 GC excavator. It describes 30 steps to disassemble the pump, removing components like the head, seals, bearings, pistons, and housing. It also describes 25 steps to reassemble the pump and install all components in the reverse order. Safety warnings are provided to prevent injury from spring loaded parts.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of Caterpillar 336D2 and 336D2 L excavators. The disassembly procedure involves removing 30 parts in 8 steps, taking precautions for spring-loaded parts. The assembly procedure reinstalls the parts in 30 steps, heating and cooling certain parts, using tools such as retaining ring pliers and a dial indicator, and ensuring proper shim thickness and end play. Precautions are given to prevent injury from spring-loaded parts.
This document provides instructions for installing and removing the final drive and travel motor, and disassembling and assembling the swivel, on Caterpillar 336D2 and 336D2 L excavators. The procedures include using various tools to lift heavy components, installing and tightening bolts, replacing O-rings and seals, and checking for leaks during assembly. Cleanliness is emphasized to prevent contamination.
The document provides instructions for assembling and disassembling components of a piston motor (hydraulic fan) and hydraulic lockout control on excavator models 336D2 and 336D2 L. It consists of detailed step-by-step procedures with accompanying illustrations, covering tasks like installing bearings and seals, installing retaining rings, and removing panels and bolts. Safety warnings are provided throughout to prevent injury from spring-loaded parts.
The document provides instructions for servicing components of a Caterpillar 336D2L excavator engine, including:
1. Procedures for removing and installing inlet and exhaust valve guides and valve seat inserts in the cylinder head. Various tools are required.
2. Guidelines for disassembling and assembling the engine oil filter base, which includes removing springs, valves, elbows and plugs.
3. Removal of the engine oil filter, filter base, and oil cooler, requiring disconnecting hoses and removing bolts.
1. The document provides instructions for disassembling and assembling the piston pump of a 336D2 excavator.
2. It details 30 steps for assembly, including installing various parts like bearings, seals, springs, and fasteners.
3. Instructions are accompanied by illustrations and warnings about safety and cleanliness.
This document provides instructions for disassembling a travel motor on a 336D2 L excavator. The process involves 27 steps and uses various tools. Key steps include removing the motor head assembly, springs, spools, relief valves, plugs and O-rings. Safety precautions are provided to release spring forces without injury.
This document provides instructions for removing and installing the unit injector hydraulic pump on Caterpillar C9 engines. The removal process involves disconnecting fuel lines and electrical connections, removing mounting bolts, and taking out the O-ring seal. Installation is the reverse, applying a new O-ring seal and grease, positioning the pump, and reconnecting all lines and bolts. Proper cleaning and containment of fluids is emphasized to prevent contamination.
The document provides instructions for disassembling a 336D2 and 336D2 L excavator travel motor. It describes 27 steps to remove parts like the motor head assembly, springs, seals, plates, pistons, bearings and other components. Various tools are required including bolts, pins, retaining rings and specialty tools like bearing pullers and drivers. Safety precautions are provided to release spring forces and contain fluids during disassembly.
This document provides instructions for removing and installing unit injectors and unit injector sleeves on a Caterpillar C9 engine. It outlines the required tools and safety procedures. The procedures include draining fluids, removing injectors, cleaning parts, installing new seals, and reinstalling injectors and sleeves. Special care must be taken to properly install seals and avoid damaging parts.
The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) on Caterpillar 336D L and 336D LN excavators. The disassembly process involves removing 30 parts in 9 steps, taking care with springs that can propel parts, while the assembly follows 30 steps to reinstall all parts in the reverse order. Tools include retaining ring pliers, a dial indicator, and a bearing puller. The document emphasizes cleanliness during assembly and replacing any worn parts.
Caterpillar Cat 336D L Excavator (Prefix ZML) Service Repair Manual (ZML00001...kesi7153062
1. The document provides instructions for disassembling and assembling a piston pump used in a hydraulic excavator fan.
2. The disassembly process involves using various tools to remove over 30 individual parts from the pump in sequential order.
3. Reassembly requires carefully installing each part in reverse order, ensuring proper placement of seals, bearings, springs and other components.
4. Cleanliness is emphasized throughout to prevent contamination during assembly.
Caterpillar Cat 336D L Excavator (Prefix WET) Service Repair Manual (WET00001...kesi7153062
The document provides instructions for removing the final drive and travel motor, and swivel, from an excavator model 336D L. Key steps include:
1. Separating the track, disconnecting hydraulic hoses, and removing bolts to detach the final drive and travel motor assembly.
2. Removing O-rings and bolts to separate the travel motor from the final drive.
3. Releasing hydraulic pressure before removing the swivel.
Caterpillar Cat 336D L Excavator (Prefix PPN) Service Repair Manual (PPN00001...kesi7153062
The document provides instructions for disassembling and assembling a piston pump used in Caterpillar 336D L and 336D LN excavators. The procedures include 30 steps for assembling the pump and 7 steps for disassembling it. Tools required include retaining ring pliers, a dial indicator, and a bearing puller. Technicians are advised to clean all parts thoroughly before assembly and to replace any worn or damaged parts.
Caterpillar Cat 336D L Excavator (Prefix MDS) Service Repair Manual (MDS00001...kesi7153062
1. The document provides instructions for disassembling and assembling the piston pump (hydraulic fan) of a 336D L excavator.
2. The disassembly process includes removing 30 individual parts in 9 steps, taking care with spring-loaded components.
3. Reassembly requires installing the parts in reverse order, with 30 steps to install all components and ensure proper operation.
Caterpillar Cat 336D L Excavator (Prefix M4T) Service Repair Manual (M4T00001...kesi7153062
The document provides instructions for removing and installing the final drive and travel motor assembly on a 336D L excavator. Key steps include:
1. Removing hoses, fittings, bolts and covers to access the assembly.
2. Attaching lifting tools and carefully removing the heavy final drive and travel motor unit.
3. Inspecting and replacing seals if needed before reinstalling the component and reconnecting all hoses and fittings. Proper torque is applied to bolts during reinstallation.
Caterpillar Cat 336D L Excavator (Prefix LMG) Service Repair Manual (LMG00001...kesi7153062
The document provides instructions for assembling and disassembling the swivel component of an excavator. It outlines the required tools and safety procedures. The assembly procedure involves cleaning parts, positioning the swivel joint using lifting devices, and installing seals, housings, and fittings in the correct order while applying lubricants. The disassembly process is the reverse and uses specialized tools to separate components. Proper cleaning and containment of fluids is emphasized throughout.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
2/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00887302
6. Remove O-ring seal (3), port plate (4), and bearing (5) .
3/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 3 g00887311
7. Remove O-ring seals (6). Remove springs (7) .
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B) .
4/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 8. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
11. Remove plates (13) and friction discs (14) .
5/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 8 g00887401
Illustration 9 g00887405
12. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
13. Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
6/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 14. Remove shaft (15) from rotating assembly (16) .
Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
Illustration 12 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
7/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 13 g00887463
17. Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing
race (19) from shaft (15) .
Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21) .
Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21) .
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
8/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 16 g00887558
20. Remove ball (23) and springs (24) .
Illustration 17 g00887578
21. Remove bearing (25) .
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
9/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
24. Remove seal (28) .
Illustration 19 g00887619
25. Remove bolts (29) and cover (30) .
Illustration 20 g00887729
26. Remove seal (31) and backup ring (32) .
10/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:14:54 UTC+0800 2020
11/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216229
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
2/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 3. Install backup ring (32) and seal (31) .
Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27) .
3/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 6 g02107975
7. Rotate the housing.
8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25) .
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
4/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21) .
5/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15) .
Illustration 12 g00888710
6/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 15. Install bearing race (18) onto shaft (15) .
Note: Bearing race (18) must contact retaining ring (17) .
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16) .
17. Place the pump housing into Tooling (A) .
Illustration 14 g02107957
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
7/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
20. Install plates (13) and friction discs (14) into the housing.
8/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8) .
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
9/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5) .
Illustration 22 g00887295
10/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (130.5 ± 13.27 lb ft).
End By: Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:15:53 UTC+0800 2020
11/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216189
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00878123
2. Install new O-ring seal (6). Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4), as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 5. Carefully install travel motor (4) onto Tooling (A). Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3). Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. End By: Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:16:52 UTC+0800 2020
4/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04249066
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7640 Stand 2
8S-7611 Tube 2
8S-7615 Pin 2
B 138-7574 Link Bracket 2
C 154-6184 Forcing Bolt (M 20) 2
Start By:
A. Separate the track assembly. Refer to Disassembly and Assembly, "Track - Separate".
B. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
1/3
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Illustration 1 g00489826
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
2/3
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...