The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator. It lists 28 steps for disassembly, removing components like the head, brake piston, rotating assembly, and seals. It then lists 27 steps for assembly, reinstalling the components in reverse order and noting proper lubrication and torque specifications. Tools required include retaining ring pliers, a bearing puller, threaded rod, and Loctite.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly with 28 steps and provides guidance on cleaning, lubricating, and installing components in the correct orientation. Tools required include retaining ring pliers, drivers, pullers, and adapters to securely hold components during disassembly and assembly.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...kubei069369925
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...8ufjsekddm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and ensure proper alignment of parts like the cam plate and piston assemblies.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f7fujksekmdm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and torque specifications for fasteners.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly with 28 steps and provides guidance on cleaning, lubricating, and installing components in the correct orientation. Tools required include retaining ring pliers, drivers, pullers, and adapters to securely hold components during disassembly and assembly.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...kubei069369925
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...8ufjsekddm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and ensure proper alignment of parts like the cam plate and piston assemblies.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f7fujksekmdm8u
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and torque specifications for fasteners.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...jdkskmdmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing using various tools over the course of 21 steps. Precise alignment and lubrication of parts is emphasized to ensure proper reassembly.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...shanruliu7360
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...prmy389342
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...rishang96299
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...ufjksemd8ujd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...idkkdkmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...idkkdkmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual (JCZ00001...shudun96087
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like pistons, plates, seals.
2. Using specialized tools to pull bearings and races from the shaft and housing.
3. Reassembling the components in reverse order, making sure to lubricate seals and mating surfaces, and aligning parts properly. Precise reinstallation of pieces is emphasized.
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like seals, plates, pistons.
2. Using pullers and presses to remove bearing races and other press-fit parts.
3. Reassembling the travel motor by pressing in new bearings, installing springs, seals and other components in the reverse order of removal. Lubrication and proper positioning of parts is emphasized.
The document provides instructions for disassembling a travel motor on an excavator model 330F. It lists 28 steps to completely disassemble the travel motor, including removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Various specialized tools are required to properly support, remove, and disassemble the parts in the correct sequence. Safety precautions are provided throughout to warn of potential spring forces or pressurized air when disassembling parts.
Caterpillar Cat 330D2 L Excavator (Prefix PTE) Service Repair Manual (PTE0000...shudun96087
This document provides instructions for removing and installing a turbocharger on Caterpillar 330D2 L excavator engines. The removal process involves disconnecting hoses and tubes, removing mounting bolts and nuts, and taking off the turbocharger. For installation, the instructions specify cleaning components, applying anti-seize compound to studs, mounting the turbocharger using nuts and bolts, and orienting and securing connecting tubes with gaskets and specified torques. Tools including a rubber lubricant and anti-seize compound are listed. Safety notices advise keeping components clean and containing fluids.
More Related Content
Similar to Caterpillar Cat 324E LN Excavator (Prefix LDG) Service Repair Manual (LDG00001 and up).pdf
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...jdkskmdmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing using various tools over the course of 21 steps. Precise alignment and lubrication of parts is emphasized to ensure proper reassembly.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...shanruliu7360
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...prmy389342
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...rishang96299
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...ufjksemd8ujd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...idkkdkmdm
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...idkkdkmdm
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual (LDG00001...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of 324E and 324E LN excavators. The disassembly process involves removing 28 components from the travel motor in 27 steps. The assembly process reverses the disassembly steps, instructing technicians to install components like seals, plates, springs, and bearings back into the travel motor housing and rotating assembly using various tools over the course of 21 steps. Precise alignment of parts is important and lubrication of components with appropriate fluids is specified.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e ln excavator (prefix ldg) service repair manual (ldg000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...cdfzxs
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...jfjskekdhnejd
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual (JCZ00001...shudun96087
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like pistons, plates, seals.
2. Using specialized tools to pull bearings and races from the shaft and housing.
3. Reassembling the components in reverse order, making sure to lubricate seals and mating surfaces, and aligning parts properly. Precise reinstallation of pieces is emphasized.
The document provides instructions for disassembling and assembling a travel motor. Key steps include:
1. Removing the head from the motor body and disassembling internal components like seals, plates, pistons.
2. Using pullers and presses to remove bearing races and other press-fit parts.
3. Reassembling the travel motor by pressing in new bearings, installing springs, seals and other components in the reverse order of removal. Lubrication and proper positioning of parts is emphasized.
Similar to Caterpillar Cat 324E LN Excavator (Prefix LDG) Service Repair Manual (LDG00001 and up).pdf (20)
The document provides instructions for disassembling a travel motor on an excavator model 330F. It lists 28 steps to completely disassemble the travel motor, including removing components like the head assembly, housing assembly, brake piston, rotating group, pistons, and seals. Various specialized tools are required to properly support, remove, and disassemble the parts in the correct sequence. Safety precautions are provided throughout to warn of potential spring forces or pressurized air when disassembling parts.
Caterpillar Cat 330D2 L Excavator (Prefix PTE) Service Repair Manual (PTE0000...shudun96087
This document provides instructions for removing and installing a turbocharger on Caterpillar 330D2 L excavator engines. The removal process involves disconnecting hoses and tubes, removing mounting bolts and nuts, and taking off the turbocharger. For installation, the instructions specify cleaning components, applying anti-seize compound to studs, mounting the turbocharger using nuts and bolts, and orienting and securing connecting tubes with gaskets and specified torques. Tools including a rubber lubricant and anti-seize compound are listed. Safety notices advise keeping components clean and containing fluids.
Caterpillar Cat 330D2 L Excavator (Prefix HER) Service Repair Manual (HER0000...shudun96087
This document provides disassembly and assembly instructions for the final drive of a 330D2 excavator. The disassembly procedure involves using various tools to remove 27 individual parts from the final drive assembly including gears, shafts, carriers, seals and housings. The assembly procedure instructs how to reinstall these parts in reverse order and also describes how to properly set the bearing preload using shims.
Caterpillar Cat 330D2 L Excavator (Prefix FEX) Service Repair Manual (FEX0000...shudun96087
This document provides disassembly instructions for a final drive system. It outlines 33 steps to fully disassemble the drive, including removing covers, gears, carriers, shafts, seals, and housing components. Various tools are required, and notes provide guidance on cleaning, marking parts, and safely lifting heavy components. Detailed illustrations accompany each step to show the assembly views and identified parts.
This document provides instructions for disassembling and assembling the final drive of a 330D2 excavator. The disassembly process involves using various tools to remove 27 different components of the final drive in a specific order. The assembly process reverses the disassembly steps and provides details on installing seals, adjusting bearing preload using shims, and torquing bolts to specifications.
This document provides disassembly instructions for a final drive system. It outlines 32 steps to fully disassemble the drive, including removing covers, gears, carriers, shafts, seals, and housing components. Various tools are required, and notes provide guidance on cleaning, marking parts, weight of components, and pressing/lifting procedures. Detailed illustrations accompany each step.
Caterpillar Cat 330D N Hydraulic Excavator (Prefix RAS) Service Repair Manual...shudun96087
The document provides instructions for removing the final drive and travel motor assembly from a 330D L hydraulic excavator. It lists the required tools and safety precautions. The procedure involves applying vacuum pressure to the hydraulic system, disconnecting hoses, and removing bolts to detach the final drive and travel motor assembly using lifting tools. Markings are to be made to ensure correct reinstallation orientation.
Caterpillar Cat 330D L Mobile Hydraulic Excavator (Prefix H3D) Service Repair...shudun96087
This document provides instructions for removing and installing rear gear group components on a 330D L excavator with a C9 engine. The removal procedure involves using tools to remove retaining bolts and gears. Bearings are removed from adapters using specialized tools. Clearances are checked when installing new bearings. The installation procedure specifies matching angles and distances when pressing bearings in place and reinstalling gears and covers. Torques are provided for reinstalling bolts.
Caterpillar Cat 330D L Hydraulic Excavator (Prefix RAS) Service Repair Manual...shudun96087
This document provides instructions for removing and installing the final drive and travel motor on a 330D L hydraulic excavator. The removal procedure involves disconnecting hoses, removing bolts and fittings, and lifting the final drive and travel motor assembly out of the machine. The installation procedure describes reinstalling components in the reverse order and includes precautions for ensuring components are clean and properly torqued.
Caterpillar Cat 330D L Excavator (Prefix R2D) Service Repair Manual (R2D00001...shudun96087
The document provides instructions for removing and installing the rear gear group on a 330D L excavator. It describes in detail:
- Removing the flywheel and pump drive gear.
- Removing bolts and parts like retainers, gears, bushings, adapters, bearings, and covers to disassemble the rear gear group.
- Cleaning requirements and using special tools during removal and installation.
- Installing corresponding parts in reverse order and ensuring proper positioning and torque specifications are followed.
The summary focuses on the high-level steps of removing the flywheel, disassembling the rear gear group by removing multiple bolts and parts, cleaning requirements, and reinstalling parts in reverse order
Caterpillar Cat 330D L Excavator (Prefix LRM) Service Repair Manual (LRM00001...shudun96087
The document provides instructions for removing and disassembling the swivel component of an excavator. Key steps include:
1. Releasing hydraulic pressure and disconnecting hose assemblies.
2. Removing bolts and covers to access the swivel.
3. Lifting the swivel out after disconnecting remaining fittings and hoses.
4. Cleaning and positioning the swivel on a repair stand for disassembly.
5. Separating the outside housing from the rotor by removing bolts, washers, and other retaining components.
Caterpillar Cat 330D L Excavator (Prefix HAS) Service Repair Manual (HAS00001...shudun96087
The document provides instructions for assembling a swivel component. It describes cleaning the parts thoroughly before assembly to prevent damage. It instructs installing new O-rings and seals if worn. The steps include positioning the rotor and outside housing using lifting tools, applying the seals and O-rings, and securing with bolts, washers, and covers while torquing to the specified values. Proper cleaning and inspection of parts is emphasized to avoid contamination issues.
Caterpillar Cat 330D L Excavator (Prefix GBC) Service Repair Manual (GBC00001...shudun96087
This document provides instructions for removing and installing the camshaft on a Caterpillar C9 engine. The removal procedure involves using a hook tool to lift each camshaft lobe out of the cylinder head after removing the rocker arm and shaft assembly. The installation procedure specifies applying lubricant to the camshaft lobes before positioning them back into the cylinder head using the hook tool. Proper lubrication and placement of parts is emphasized to prevent premature wear and failure.
Caterpillar Cat 330D L Excavator (Prefix EDX) Service Repair Manual (EDX00001...shudun96087
The document provides instructions for removing the swing gear and bearing from an excavator undercarriage frame. The procedure involves:
1. Removing all grease from the swing gear and bearing and placing it in a suitable container.
2. Marking the swing gear and bearing and frame for reassembly.
3. Using lifting equipment and link brackets to support the swing gear and bearing while removing bolts.
4. Removing the 280 kg swing gear and bearing assembly.
Caterpillar Cat 330D L Excavator (Prefix B6H) Service Repair Manual (B6H00001...shudun96087
This document provides instructions for removing and installing an operator console on an excavator. It begins by removing the seat and then removing plates (1) and (2). Hoses, lines, wires and tubes are identified and plugged to prevent fluid loss and contamination. Screws are removed from the console mounting brackets and the console is lifted off. Reinstallation follows the removal steps in reverse.
This service repair manual provides instructions for repairing 330D and 330D L excavators. It details the process for removing and installing the cylinder head, which includes draining coolant, removing mounting bolts and hoses, and lifting the head off using a lifting bracket. It also provides instructions for removing and installing the camshaft, which involves aligning timing marks, removing mounting bolts, and sliding the camshaft in and out of the engine block. Precautions are given to keep parts clean and avoid damaging lobes or bearings during removal and installation.
The document provides instructions for removing the swing gear and bearing from an excavator undercarriage frame. The procedure involves:
1. Removing all grease from the swing gear and bearing and placing it in a suitable container.
2. Marking the swing gear and bearing and frame for reassembly.
3. Using lifting equipment and link brackets to support the swing gear and bearing while removing bolts.
4. Removing the 280 kg swing gear and bearing assembly.
Caterpillar Cat 330C FM EXCAVATOR (Prefix B3M) Service Repair Manual (B3M0000...shudun96087
This document provides instructions for removing and installing components on a 330C FM Excavator, including:
- Releasing hydraulic pressure from single and multiple circuits before servicing lines or components
- Removing and installing the air compressor drive gear
- Removing and installing batteries
- Removing and installing the alternator
It describes the required tools, safety precautions, illustrated steps, and torque specifications for each job. Releasing hydraulic pressure properly is emphasized to prevent injury from high pressure lines.
Caterpillar Cat 330C FM EXCAVATOR (Prefix B1K) Service Repair Manual (B1K0000...shudun96087
This document provides instructions for servicing components of a Caterpillar 330C FM excavator engine. It describes how to remove and install the cylinder head, which involves draining coolant, removing accessories, sensors and bolts, and lifting the head off. It also details removing and installing the lifter group by using tools to pull lifters from the cylinder block and lubricating them before replacing in their original locations. Precautions are given to keep parts clean and contain fluids during repair work.
The documents provide instructions for removing and installing components related to the valve train of a Caterpillar 330B excavator engine, including:
- Removing the cylinder head by detaching various lines and manifolds, then removing bolts and lifting the head off
- Disassembling the rocker shaft by removing supports, arms, springs and the shaft itself
- Assembling the rocker shaft by installing the above components in reverse order
- Removing the rocker shaft and pushrods
- Installing the rocker shaft and pushrods, adjusting valve lash and tightening bolts in a specific sequence
The documents emphasize cleaning parts and containing fluids to prevent contamination and properly disposing of
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
2. A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
2/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00887302
6. Remove O-ring seal (3), port plate (4), and bearing (5) .
3/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 3 g00887311
7. Remove O-ring seals (6). Remove springs (7) .
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B) .
4/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 8. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
11. Remove plates (13) and friction discs (14) .
5/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 8 g00887401
Illustration 9 g00887405
12. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
13. Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
6/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 14. Remove shaft (15) from rotating assembly (16) .
Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
Illustration 12 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
7/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 13 g00887463
17. Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing
race (19) from shaft (15) .
Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21) .
Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21) .
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
8/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 16 g00887558
20. Remove ball (23) and springs (24) .
Illustration 17 g00887578
21. Remove bearing (25) .
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
9/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
24. Remove seal (28) .
Illustration 19 g00887619
25. Remove bolts (29) and cover (30) .
Illustration 20 g00887729
26. Remove seal (31) and backup ring (32) .
10/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:14:54 UTC+0800 2020
11/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216229
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
2/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 3. Install backup ring (32) and seal (31) .
Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27) .
3/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 6 g02107975
7. Rotate the housing.
8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25) .
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
4/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21) .
5/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15) .
Illustration 12 g00888710
6/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 15. Install bearing race (18) onto shaft (15) .
Note: Bearing race (18) must contact retaining ring (17) .
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16) .
17. Place the pump housing into Tooling (A) .
Illustration 14 g02107957
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
7/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
20. Install plates (13) and friction discs (14) into the housing.
8/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8) .
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
9/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5) .
Illustration 22 g00887295
10/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (130.5 ± 13.27 lb ft).
End By: Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:15:53 UTC+0800 2020
11/11
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 ...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216189
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00878123
2. Install new O-ring seal (6). Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4), as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 5. Carefully install travel motor (4) onto Tooling (A). Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3). Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
28. End By: Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu Jul 30 08:16:52 UTC+0800 2020
4/4
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E LN EXCAVATOR LDG
Configuration: 324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04249066
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7640 Stand 2
8S-7611 Tube 2
8S-7615 Pin 2
B 138-7574 Link Bracket 2
C 154-6184 Forcing Bolt (M 20) 2
Start By:
A. Separate the track assembly. Refer to Disassembly and Assembly, "Track - Separate".
B. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
1/3
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Illustration 1 g00489826
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
2/3
324E L & 324E LN Excavators LDG00001-UP (MACHINE) POWERED BY C7.1 En...
2020/7/30
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...