This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process involves removing 28 components from the travel motor including the head, brake piston, plates, springs and seals. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys and piston marks. Special tools are required for tasks like removing races and seals.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 324 d l excavator (prefix gpk) service repair manual (gpk0000...fjskekdmmem
This document provides the disassembly procedure for a 324D L excavator travel motor. It involves 28 steps to fully disassemble the travel motor, removing components like the head, port plate, springs, pistons, seals, and more. Various tools are required including an adapter, nuts, threaded rod, bolts, eyebolts, retaining ring pliers, a bearing puller, and more. Safety precautions are provided to be careful of spring forces and contain fluids during disassembly.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...jfksekmmdme
This document provides disassembly and assembly instructions for a travel motor on 324D L and 324D LN excavator models. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor including removing seals, plates, springs, and bearings.
3) Detailed step-by-step instructions for reassembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor such as removing the head, brake piston, plates and discs, bearings and seals.
3) Detailed step-by-step instructions for assembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix jat) service repair manual (jat0000...fjskekdmmem
This document provides the disassembly procedure for a service repair manual of excavator models 324D and 324D L. It involves 28 steps to fully disassemble the travel motor, including removing components like the head, port plate, bearing, springs, brake piston, plates, friction discs, bearing races, cam plate, piston assemblies, ball, springs, and seals. Precautions are provided regarding potential injuries from spring force and ensuring cleanliness during disassembly and assembly. Required tools include an adapter, nuts, washers, threaded rod, eyebolt, retaining ring pliers, driver group, bearing puller group, and thread lock compound.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsekekmmd
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...jfksekmmdme
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. It outlines 32 steps to fully disassemble the final drive assembly, including removing gears, shafts, housings, seals, and other internal components. Cleanliness is emphasized to prevent dirt contamination during disassembly. Various specialty tools are listed that are required to remove retaining rings, pins, and other secured pieces. The document provides illustrations and detailed instructions for each step in the disassembly process.
Caterpillar cat 324 d l excavator (prefix gpk) service repair manual (gpk0000...fjskekdmmem
This document provides the disassembly procedure for a 324D L excavator travel motor. It involves 28 steps to fully disassemble the travel motor, removing components like the head, port plate, springs, pistons, seals, and more. Various tools are required including an adapter, nuts, threaded rod, bolts, eyebolts, retaining ring pliers, a bearing puller, and more. Safety precautions are provided to be careful of spring forces and contain fluids during disassembly.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...jfksekmmdme
This document provides disassembly and assembly instructions for a travel motor on 324D L and 324D LN excavator models. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor including removing seals, plates, springs, and bearings.
3) Detailed step-by-step instructions for reassembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor housing, including the head, port plate, bearings, brake piston, plates, springs, and seals. The assembly procedure reverses the disassembly steps and involves installing components in the proper order and orientation, with notes to clean parts thoroughly, apply lubricant, and ensure correct positioning of marked components.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...jfksekmmdme
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. It includes:
1) A list of required tools for disassembly and assembly.
2) Detailed step-by-step instructions for disassembling components of the travel motor such as removing the head, brake piston, plates and discs, bearings and seals.
3) Detailed step-by-step instructions for assembling the travel motor in reverse order, including applying thread lock compound and ensuring cleanliness.
Caterpillar cat 324 d l excavator (prefix jat) service repair manual (jat0000...fjskekdmmem
This document provides the disassembly procedure for a service repair manual of excavator models 324D and 324D L. It involves 28 steps to fully disassemble the travel motor, including removing components like the head, port plate, bearing, springs, brake piston, plates, friction discs, bearing races, cam plate, piston assemblies, ball, springs, and seals. Precautions are provided regarding potential injuries from spring force and ensuring cleanliness during disassembly and assembly. Required tools include an adapter, nuts, washers, threaded rod, eyebolt, retaining ring pliers, driver group, bearing puller group, and thread lock compound.
Caterpillar cat 324 d l excavator (prefix jzr) service repair manual (jzr0000...fjskekdmmem
This document provides the disassembly and assembly procedures for a 324D and 324D L excavator travel motor. The disassembly procedure involves 28 steps to remove components from the travel motor housing. The assembly procedure reverses the disassembly steps and involves installing components back into the housing, with notes to clean parts thoroughly, apply lubricant, and ensure proper positioning of parts. Tools required for disassembly and assembly are also listed.
Caterpillar cat 325 d l excavator (prefix lal) service repair manual (lal0000...hfjsekekmmd
This document provides the disassembly procedure for a 325D L excavator travel motor. It lists 28 steps to fully disassemble the travel motor including removing the head, port plate, springs, plates, friction discs, bearing races, cam plate, piston assemblies, seals, and other components. Precautions are given to contain fluids, mark components for reinstallation, and ensure cleanliness during disassembly and assembly. Required tools are also listed.
Caterpillar cat 336 e hvg excavator (prefix rbs) service repair manual (rbs00...f8isoeidkdk
The document provides instructions for installing a rear power take-off (RPTO) on a C9.3 engine. The procedure involves installing various components like a bearing, thrust washer, dowels, adapter assembly, idler gear and shaft. Tools like guide studs and driver groups are required. Torque specifications and the correct sequence are important to properly install the RPTO.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 324 e excavator (prefix jcz) service repair manual (jcz00001 ...jfksekmmdme
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, pistons, bearing races, and seals. The assembly process reverses the disassembly steps and includes lubricating components and using various tools to install retaining rings, seals, and other parts back into their original positions. Precise alignment of parts is important for proper reassembly.
Caterpillar cat 330 c l excavator (prefix mkm) service repair manual (mkm0000...hhjsekmdmm
This document provides instructions for disassembling and assembling the travel motor of a 330C excavator. It begins by listing the required tools. The disassembly process is then described in 28 steps, removing components like the head, springs, plates, and seals. The assembly section follows the reverse order in 23 steps, applying thread lock and ensuring proper alignment of parts. Precautions are provided to prevent damage and ensure cleanliness during the process.
Caterpillar cat 324 e excavator (prefix kte) service repair manual (kte00001 ...jfksekmmdme
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and provides step-by-step instructions with accompanying illustrations. The disassembly process involves removing 27 different components from the travel motor housing including seals, springs, plates, discs, pistons, and bearings. The assembly process reverses the disassembly steps, instructing the technician to lubricate components, align markings, and tighten bolts to the specified torque using the appropriate tools.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
The document provides instructions for removing and installing various engine components on a Caterpillar 330D2 excavator, including the engine oil pump, water pump, water temperature regulator, and flywheel. The procedures note required tools and safety precautions. Components must be clean and free of damage, with replacement of worn parts. Proper torque values are specified for reinstallation of components.
Hyundai r140 w 9 wheel excavator service repair manualfksjksmmde
1) The document provides instructions for removing and assembling various components of a front axle, including the planetary reduction and axle shaft, braking unit, and steering case.
2) Detailed steps are given for removing parts like the planetary carrier cover, crown flange, hub, bearings, and pistons. Assembly instructions include pressing in thrust blocks and installing seals, bearings, and other components.
3) Safety precautions and notes are provided throughout, such as ensuring parts are correctly oriented during assembly and noting the order of disks for reinstallation. Tightening torques are specified for fasteners.
Caterpillar cat 330 d l excavator (prefix jlp) service repair manual (jlp0000...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator. It begins by having the technician mark the final drive for alignment and then remove the final drive and travel motor. Over 30 steps are then outlined to disassemble the various components of the final drive. This includes removing gears, carriers, shafts, seals and other parts using specialized tools. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanism.
Caterpillar cat 324 e l excavator (prefix jcz) service repair manual (jcz0000...jfksekmmdme
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, pistons and bearings. The assembly process reverses the disassembly steps and includes lubricating components and using various tools to install retaining rings, seals and races. Precautions are provided to prevent damage to parts and injury to technicians during assembly and disassembly.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...f7fujksekmdm8u
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings in the correct order. Tools required include retaining ring pliers, drivers, pullers and adapters. Precautions are outlined such as lubricating parts, noting alignment marks, and taking care when installing spring loaded components.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or springs to avoid injury.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...ufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings in the correct order. Tools required include retaining ring pliers, drivers, pullers and adapters. Precautions are outlined such as lubricating parts, noting alignment marks, and taking care when installing spring loaded components.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...prmy389342
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools, applying threadlocker and lubricant, and ensuring proper alignment of parts.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...8ufjsekddm8u
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
Caterpillar cat 336 e hvg excavator (prefix rbs) service repair manual (rbs00...f8isoeidkdk
The document provides instructions for installing a rear power take-off (RPTO) on a C9.3 engine. The procedure involves installing various components like a bearing, thrust washer, dowels, adapter assembly, idler gear and shaft. Tools like guide studs and driver groups are required. Torque specifications and the correct sequence are important to properly install the RPTO.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 324 e excavator (prefix jcz) service repair manual (jcz00001 ...jfksekmmdme
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, pistons, bearing races, and seals. The assembly process reverses the disassembly steps and includes lubricating components and using various tools to install retaining rings, seals, and other parts back into their original positions. Precise alignment of parts is important for proper reassembly.
Caterpillar cat 330 c l excavator (prefix mkm) service repair manual (mkm0000...hhjsekmdmm
This document provides instructions for disassembling and assembling the travel motor of a 330C excavator. It begins by listing the required tools. The disassembly process is then described in 28 steps, removing components like the head, springs, plates, and seals. The assembly section follows the reverse order in 23 steps, applying thread lock and ensuring proper alignment of parts. Precautions are provided to prevent damage and ensure cleanliness during the process.
Caterpillar cat 324 e excavator (prefix kte) service repair manual (kte00001 ...jfksekmmdme
The document provides instructions for disassembling and assembling a travel motor. It lists the required tools and provides step-by-step instructions with accompanying illustrations. The disassembly process involves removing 27 different components from the travel motor housing including seals, springs, plates, discs, pistons, and bearings. The assembly process reverses the disassembly steps, instructing the technician to lubricate components, align markings, and tighten bolts to the specified torque using the appropriate tools.
Caterpillar cat 336 e lh excavator (prefix gny) service repair manual (gny000...fjskekdmjekm
The document provides assembly instructions for a travel motor in 28 steps. It details installing various components like seals, springs, pistons, and plates in the proper sequence. It also describes attaching the travel motor to the excavator and tightening bolts to the specified torques. The removal and installation procedures for a final drive and travel motor are also outlined in 13 steps, including draining oil first and marking components for reinstallation.
The document provides instructions for removing and installing various engine components on a Caterpillar 330D2 excavator, including the engine oil pump, water pump, water temperature regulator, and flywheel. The procedures note required tools and safety precautions. Components must be clean and free of damage, with replacement of worn parts. Proper torque values are specified for reinstallation of components.
Hyundai r140 w 9 wheel excavator service repair manualfksjksmmde
1) The document provides instructions for removing and assembling various components of a front axle, including the planetary reduction and axle shaft, braking unit, and steering case.
2) Detailed steps are given for removing parts like the planetary carrier cover, crown flange, hub, bearings, and pistons. Assembly instructions include pressing in thrust blocks and installing seals, bearings, and other components.
3) Safety precautions and notes are provided throughout, such as ensuring parts are correctly oriented during assembly and noting the order of disks for reinstallation. Tightening torques are specified for fasteners.
Caterpillar cat 330 d l excavator (prefix jlp) service repair manual (jlp0000...hhjsekmdmm
This document provides disassembly instructions for a final drive on an excavator. It begins by having the technician mark the final drive for alignment and then remove the final drive and travel motor. Over 30 steps are then outlined to disassemble the various components of the final drive. This includes removing gears, carriers, shafts, seals and other parts using specialized tools. Cleanliness is emphasized throughout the process to prevent dirt from entering the mechanism.
Caterpillar cat 324 e l excavator (prefix jcz) service repair manual (jcz0000...jfksekmmdme
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, pistons and bearings. The assembly process reverses the disassembly steps and includes lubricating components and using various tools to install retaining rings, seals and races. Precautions are provided to prevent damage to parts and injury to technicians during assembly and disassembly.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...f7fujksekmdm8u
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings in the correct order. Tools required include retaining ring pliers, drivers, pullers and adapters. Precautions are outlined such as lubricating parts, noting alignment marks, and taking care when installing spring loaded components.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or springs to avoid injury.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...ufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings in the correct order. Tools required include retaining ring pliers, drivers, pullers and adapters. Precautions are outlined such as lubricating parts, noting alignment marks, and taking care when installing spring loaded components.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...prmy389342
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools, applying threadlocker and lubricant, and ensuring proper alignment of parts.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...8ufjsekddm8u
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual (KTE00001...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual Instant D...rishang96299
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Similar to Caterpillar cat 324 e l excavator (prefix jcz) service repair manual (jcz00001 and up) (15)
Crown wf3000 series forklift service repair manualudjdkdkdmm
1. The document is a service manual for the WF3000 series forklift trucks that provides information on maintenance, repair, troubleshooting, and specifications for the trucks.
2. It includes sections covering lubrication and adjustments, hydraulics, drive unit, electrics, brakes, steering, mast, cylinders, and electrical diagrams.
3. The manual provides maintenance technicians with the information needed to service the trucks, such as recommended lubricants, component locations, repair instructions, and electrical schematics.
Crown we2000 series forklift service repair manualudjdkdkdmm
This document is a service and parts manual for a series of trucks. It contains sections on maintenance, lubrication, adjustments, hydraulics, drive units, wheels, tires, electrical systems, and components. The manual provides instructions on inspection schedules, maintenance plans, component access, lubrication points, and repair procedures. It also includes schematics, diagrams, part numbers, and other technical information needed for service and repairs.
Crown wave50 work assit vehicle service repair manualudjdkdkdmm
This document is a maintenance manual for the WAVE 50 series work assist vehicle. It provides instructions for general maintenance, cleaning, safety procedures, and maintenance of specific vehicle systems. Systems covered include the battery, hydraulics, mast, drive unit, and other mechanical components. The manual includes lubrication guidelines, component locations, troubleshooting information, and torque specifications for repairs.
Crown sx3000 series forklift service repair manualudjdkdkdmm
This document provides service and maintenance information for the SX3000 Series truck. It begins with safety notes and warnings for working on the truck. The document then provides an introduction and details on model numbers. Most of the subsequent sections provide removal and repair instructions for various truck components, including lubrication/maintenance, hydraulics, the drive unit, electrics, brakes, the control handle, mast, cylinders, and diagrams. Torque specifications and lubrication points/intervals are also included.
Crown st3000 series forklift service repair manualudjdkdkdmm
This document provides service information for the ST3000 series truck, including safety information, an introduction, model numbers, lubrication and maintenance procedures, hydraulic and electrical systems, brakes, controls, mast, forks, cylinders, and diagrams. It contains information on component access, recommended lubricants, inspection and maintenance schedules, hydraulic and electrical components, systems and troubleshooting. The document is divided into sections covering various truck systems and components to assist with maintenance, repair, and safe operation of the ST3000 series truck.
Crown sc3200 series forklift service repair manualudjdkdkdmm
1. The document provides maintenance instructions for the SC3200 series truck. It details safety procedures, component descriptions, lubrication and inspection schedules, repair procedures, and torque specifications.
2. The table of contents lists 7 chapters covering topics such as hydraulics, drive systems, electrics, brakes, steering, mast, and forks. Diagrams and part numbers are provided for components.
3. Inspections and maintenance are divided into daily, monthly, quarterly, biannual, and annual schedules. Repair procedures include disassembling and overhauling components like pumps, motors, gears, cylinders and providing assembly instructions.
Caterpillar cat 324 e l excavator (prefix kte) service repair manual (kte0000...udjdkdkdmm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components and springs to avoid injury.
Caterpillar cat 324 e excavator (prefix kte) service repair manual (kte00001 ...udjdkdkdmm
This document provides instructions for assembling a travel motor for excavator models 324E and 324E L. The 28 step assembly process includes installing various components like seals, bearings, plates, springs and retaining rings onto the housing, shaft and barrel assembly in the correct order. Special tools are required to install some parts and apply locking agents or lubricants where specified. Proper assembly sequence and special handling of spring loaded parts is important to prevent injury.
Caterpillar cat 324 e excavator (prefix jcz) service repair manual (jcz00001 ...udjdkdkdmm
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs and seals. The assembly section outlines 29 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar cat 324 d ln excavator (prefix trh) service repair manual (trh000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. The disassembly procedure is outlined in 28 steps and removes components like the motor head, seals, springs, plates, and bearings. The assembly procedure is outlined in 15 steps and instructs technicians to install components like seals, bearings, plates, springs and balls back into their original positions on the travel motor housing and barrel assembly. Cleanliness is emphasized throughout the process.
Caterpillar cat 324 d ln excavator (prefix sym) service repair manual (sym000...udjdkdkdmm
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar cat 324 d ln excavator (prefix btk) service repair manual (btk000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. The disassembly procedure is outlined in 28 steps and includes removing components like the head, seals, springs, plates, and bearings. The assembly procedure reverses the disassembly steps in 15 illustrated steps and provides notes on cleaning, applying thread lock compound and lubricant, and ensuring parts are returned to their original positions.
Caterpillar cat 324 d l excavator (prefix tsn) service repair manual (tsn0000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D and 324D L. The disassembly procedure involves 28 steps to remove components from the travel motor including the head, springs, plates, seals, bearings, and housing cover. The assembly procedure instructs to install components in the reverse order and notes that all seals and gaskets must be replaced, parts must be cleaned before assembly, and lubricant applied to components. Proper tooling is required for tasks like removing retaining rings and installing seals.
Caterpillar cat 324 d l excavator (prefix trh) service repair manual (trh0000...udjdkdkdmm
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. It includes 28 steps for disassembly that remove components like the motor head, seals, plates, discs, bearings, and housing pieces. The 28 steps for assembly install these same components in reverse order and include notes about cleaning, applying lubricant, and ensuring correct part positioning. Tools required are also listed.
Caterpillar cat 324 d l excavator (prefix sym) service repair manual (sym0000...udjdkdkdmm
This document provides disassembly instructions for the final drive of a 324D L and 324D LN excavator. The 31 step process involves removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are required to remove retaining rings, pins and other secured pieces. Cleanliness is important to prevent dirt contamination during disassembly.
Caterpillar cat 324 d l excavator (prefix pyt) service repair manual (pyt0000...udjdkdkdmm
This document provides instructions for disassembling and assembling the final drive of a 324D L Excavator. The assembly procedure involves 37 steps and requires various tools. Key steps include pressing bearings into housings, measuring bearing preload, installing seals using special tools, and applying anti-seize compound to surfaces. Cleanliness is emphasized throughout to prevent contamination.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
A. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor
is approximately 60 kg (132 lb).
3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
2/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
4. Remove bolts (1) .
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00887302
6. Remove O-ring seal (3), port plate (4), and bearing (5) .
3/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00887311
7. Remove O-ring seals (6). Remove springs (7) .
Illustration 4 g00887331
Illustration 5 g00890074
This is an example of the use of Tooling (B) .
4/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 8. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure
that the shop air pressure is free of water. Brake piston (8) will move up the piston guide,
and out of the piston guide. Remove brake piston (8) from the body of the travel motor.
Illustration 6 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 7 g00887355
11. Remove plates (13) and friction discs (14) .
5/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g00887401
Illustration 9 g00887405
12. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from
the housing.
13. Remove Tooling (C) from shaft (15) .
Illustration 10 g00887424
6/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 14. Remove shaft (15) from rotating assembly (16) .
Illustration 11 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15) .
Illustration 12 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
7/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 13 g00887463
17. Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing
race (19) from shaft (15) .
Illustration 14 g00887501
18. Remove cam plate (20) from barrel assembly (21) .
Illustration 15 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21) .
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to
the original position.
8/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 16 g00887558
20. Remove ball (23) and springs (24) .
Illustration 17 g00887578
21. Remove bearing (25) .
22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 18 g00887589
9/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. 23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27) .
24. Remove seal (28) .
Illustration 19 g00887619
25. Remove bolts (29) and cover (30) .
Illustration 20 g00887729
26. Remove seal (31) and backup ring (32) .
10/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engi...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 21 g00887754
27. Remove piston actuator (33) and seal (34).
Illustration 22 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:49:02 UTC+0800 2020
11/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engi...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E EXCAVATOR JCZ
Configuration: 324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216229
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
1/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 1 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 2 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 3 g00887729
2/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 3. Install backup ring (32) and seal (31) .
Illustration 4 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 5 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install
lip seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27) .
3/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 6 g02107975
7. Rotate the housing.
8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25) .
Illustration 7 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate
ball (23) with lubricant that is being sealed.
4/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies
and retainer plate (22) into barrel assembly (21).
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons
must be returned to the same position.
Illustration 9 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto
barrel assembly (21) .
5/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 10 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15) .
Illustration 11 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto
shaft (15) .
Illustration 12 g00888710
6/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. 15. Install bearing race (18) onto shaft (15) .
Note: Bearing race (18) must contact retaining ring (17) .
Illustration 13 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16) .
17. Place the pump housing into Tooling (A) .
Illustration 14 g02107957
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
7/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 15 g00887501
Illustration 16 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom
of the housing of the travel motor.
Illustration 17 g00887355
20. Install plates (13) and friction discs (14) into the housing.
8/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Note: Install the plates and the discs alternately.
Illustration 18 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 19 g00888967
23. Rotate brake piston (8) .
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in
order to prevent damage to the O-ring seals.
9/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 20 g00887311
25. Install springs (7) and O-ring seals (6) .
Illustration 21 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate
(4), and bearing (5) .
Illustration 22 g00887295
10/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engi...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (130.5 ± 13.27 lb ft).
End By: Install the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:50:01 UTC+0800 2020
11/11
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engi...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E EXCAVATOR JCZ
Configuration: 324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04216189
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/4
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 1 g00878123
2. Install new O-ring seal (6). Apply clean hydraulic oil on the O-ring seal.
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4), as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 3 g00878121
2/4
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. 5. Carefully install travel motor (4) onto Tooling (A). Slide the travel motor into the final
drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
8. Install remaining bolts (2) .
9. Connect hose assembly (3). Connect hose assembly (1) .
10. Fill the final drive with oil.
ReferenceRefer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
ReferenceRefer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
ReferenceRefer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
ReferenceRefer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
3/4
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. End By: Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve
- Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Jul 24 09:51:00 UTC+0800 2020
4/4
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 324E EXCAVATOR JCZ
Configuration: 324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
324E and 329E Excavators and 329E MHPU Mobile Hydraulic Power Unit Machine
Systems
Media Number -KENR9844-04 Publication Date -01/04/2015 Date Updated -14/04/2015
i04249066
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7640 Stand 2
8S-7611 Tube 2
8S-7615 Pin 2
B 138-7574 Link Bracket 2
C 154-6184 Forcing Bolt (M 20) 2
Start By:
A. Separate the track assembly. Refer to Disassembly and Assembly, "Track - Separate".
B. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
1/3
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 1 g00489826
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
2/3
324E & 324E L Excavators JCZ00001-UP (MACHINE) POWERED BY C7.1 Engine...
2020/7/24
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...