This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing several gears, adapters, and bearings from the flywheel housing. The installation procedure describes installing these components in reverse order and ensuring proper alignment of parts and lubrication. The document contains detailed steps and illustrations to guide the process.
Caterpillar cat 323 f l excavator (prefix kby) service repair manual (kby0000...jfdskekdmme
The document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator. The removal procedure involves taking off 12 components including adapters, gears, idler hubs and sleeve bearings. The installation procedure outlines 21 steps to reinstall these components in reverse order and ensure proper alignment and torque specifications are followed.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove multiple gears, adapters, sleeves, and bolts from the flywheel housing and crankshaft. The installation procedure outlines lubricating, aligning, and pressing components together before reinstalling bolts and gears. Proper orientation and alignment of parts is emphasized.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove 12 bolts, gears, hubs, seals and adapters from the flywheel housing. The installation procedure describes lubricating, aligning and pressing in gears and bearings before installing 20 bolts to reassemble the RPTO. The vibration damper and pulley removal requires preventing the crankshaft from rotating while removing screws to detach the pulley assembly.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove 12 bolts, gears, hubs, seals and adapters from the flywheel housing. The installation procedure describes lubricating, aligning and pressing in gears and bearings before installing 12 bolts to reassemble the RPTO. It also lists using a tool to prevent rotation while removing screws to separate the pulley, damper and adapter from the crankshaft.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...fjisejkdmd8id
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific requirements like matching dimensions and applying threadlocker to bolts.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...f8sejdkdmdijd
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific instructions for installing seals and bearings. Tools and torque specifications are provided.
Caterpillar cat 323 f l excavator (prefix kby) service repair manual (kby0000...jfdskekdmme
The document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator. The removal procedure involves taking off 12 components including adapters, gears, idler hubs and sleeve bearings. The installation procedure outlines 21 steps to reinstall these components in reverse order and ensure proper alignment and torque specifications are followed.
Caterpillar cat 323 f excavator (prefix kby) service repair manual (kby00001 ...jfdskekdmme
This document provides instructions for removing and installing the rear power take-off (RPTO) on a Caterpillar 323F excavator engine. The removal procedure involves removing 12 components including gears, adapters, and sleeve bearings. The installation procedure describes installing these components in reverse order and ensuring proper alignment and torque specifications are followed.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove multiple gears, adapters, sleeves, and bolts from the flywheel housing and crankshaft. The installation procedure outlines lubricating, aligning, and pressing components together before reinstalling bolts and gears. Proper orientation and alignment of parts is emphasized.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove 12 bolts, gears, hubs, seals and adapters from the flywheel housing. The installation procedure describes lubricating, aligning and pressing in gears and bearings before installing 20 bolts to reassemble the RPTO. The vibration damper and pulley removal requires preventing the crankshaft from rotating while removing screws to detach the pulley assembly.
The document provides instructions for removing the rear power take-off (RPTO) and installing the vibration damper and pulley on a 930M wheel loader with a C7.1 engine. The removal procedure involves using tools to remove 12 bolts, gears, hubs, seals and adapters from the flywheel housing. The installation procedure describes lubricating, aligning and pressing in gears and bearings before installing 12 bolts to reassemble the RPTO. It also lists using a tool to prevent rotation while removing screws to separate the pulley, damper and adapter from the crankshaft.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual Instant D...fijsekkdmdm2w
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, which powers a 345D L excavator. The procedures include removing the electric starting motor, flywheel, rear crankshaft seal, and other rear gear components. Detailed illustrations show the components and tools used. Precautions are provided to properly support heavy components and contain fluids.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...fjisejkdmd8id
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific requirements like matching dimensions and applying threadlocker to bolts.
Caterpillar Cat 345D L Excavator (Prefix BYC) Service Repair Manual (BYC00001...f8sejdkdmdijd
This document provides instructions for removing and installing various components of the rear gear group and flywheel on a C13 engine, including:
- Removing the rear gear group which involves taking out multiple gears, covers, seals, and bearings.
- Removing the flywheel which requires lifting equipment due to its weight and removing the ring gear.
- Installing the rear gear group and flywheel components in reverse order, noting specific instructions for installing seals and bearings. Tools and torque specifications are provided.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfshun96145luo
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines and their fuel and electrical systems, including theory of operation, diagnostics, and testing procedures. The manual is intended to be used along with machine technical manuals and provides repair specifications, procedures, and other information for engine components from the valve train and camshaft to the ignition system.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...shun96145luo
This document provides information about Powertech 4.5L and 6.8L diesel engines, including:
- Identification of engine models and serial numbers
- Guidelines for fuels, lubricants, and coolants
- Sections covering repair and maintenance of engine components
- Theory of operation and diagnostics
- Lists of required tools and specifications
The document contains technical details to assist experienced technicians in servicing Powertech diesel engines. Safety messages are included throughout and other companion manuals provide additional information on electronic fuel systems.
John Deere Alternators & Starter Motors Service Repair Manual.pdfshun96145luo
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and using protective equipment. The document provides tables of standard torque values for bolts and includes wiring diagrams.
John Deere 113 172 Clipper Service Repair Manual.pdfshun96145luo
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep a safe distance when operating equipment and wear protective gear like hearing protection.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfshun96145luo
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
John Deere 14SZ Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 14SX Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14ST Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 14SE Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on these mowers.
John Deere 14SC Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides remove/install and repair procedures, component locations, theory of operation, and diagnostic information to service technicians.
John Deere 14SB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for repairing various engine models, fuel and air systems, electrical systems, power trains, and performing tests and adjustments. Safety messages are included at the beginning regarding handling fluids, preventing battery explosions, emergency preparedness, and preventing acid burns.
John Deere 14PZ Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14PT Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14PB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair the mowers.
John Deere 12SB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 12PC Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 12PB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 6-414T OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John Deere 6-414D OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid in navigation.
- Tables providing engine model numbers covered, torque specifications for hardware, and an introduction on how technicians should use the manual in conjunction with fundamentals manuals.
The document aims to equip technicians with both general background and specific technical details to service the 300 Series engine models through its organized layout and comprehensive coverage of systems.
John Deere 6-359T OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid in navigation.
- Tables providing engine model numbers covered, torque specifications for hardware, and an introduction on how technicians should use the manual in conjunction with fundamentals manuals.
The document aims to equip technicians with both general background and specific technical details to service the engines through concise sections and an accessible contents and index structure.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
John Deere Yanmar Engines 322, F912, F932 Service Repair Manual.pdfshun96145luo
This document is a component technical manual for Yanmar gasoline engines. It contains instructions for repairing engines and their fuel and electrical systems, including theory of operation, diagnostics, and testing procedures. The manual is intended to be used along with machine technical manuals and provides repair specifications, procedures, and other information for engine components from the valve train and camshaft to the ignition system.
John Deere POWERTECH 4.5L & 6.8L Diesel Engines Base Engine Service Repair Ma...shun96145luo
This document provides information about Powertech 4.5L and 6.8L diesel engines, including:
- Identification of engine models and serial numbers
- Guidelines for fuels, lubricants, and coolants
- Sections covering repair and maintenance of engine components
- Theory of operation and diagnostics
- Lists of required tools and specifications
The document contains technical details to assist experienced technicians in servicing Powertech diesel engines. Safety messages are included throughout and other companion manuals provide additional information on electronic fuel systems.
John Deere Alternators & Starter Motors Service Repair Manual.pdfshun96145luo
This document is a Component Technical Manual from Deere & Company that provides service information for alternators and starter motors. It contains sections on safety, general information, and electrical system basics. The safety section outlines proper procedures and precautions for working on electrical components, including preventing battery explosions, handling fluids safely, and using protective equipment. The document provides tables of standard torque values for bolts and includes wiring diagrams.
John Deere 113 172 Clipper Service Repair Manual.pdfshun96145luo
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep a safe distance when operating equipment and wear protective gear like hearing protection.
John Deere 110G, 210G, 240G 260G Trimmer Clutters Service Repair Manual.pdfshun96145luo
The document provides specifications for small engines and equipment including blowers, hedge clippers, and trimmers made by John Deere, listing details like engine type, displacement, speed ranges, components, and dimensions for each model. Safety guidelines are also provided, advising users to keep others away from operating equipment, avoid overreaching or pointing tools at people, and always shut off engines before adjusting or refueling.
John Deere 14SZ Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 14SX Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14ST Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 14SE Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service the components, diagnose issues, and perform repairs on these mowers.
John Deere 14SC Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides remove/install and repair procedures, component locations, theory of operation, and diagnostic information to service technicians.
John Deere 14SB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for repairing various engine models, fuel and air systems, electrical systems, power trains, and performing tests and adjustments. Safety messages are included at the beginning regarding handling fluids, preventing battery explosions, emergency preparedness, and preventing acid burns.
John Deere 14PZ Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14PT Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 14PB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair the mowers.
John Deere 12SB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 12PC Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel/air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repairs. It provides technicians with information needed for diagnosis, repair, and maintenance of the mowers.
John Deere 12PB Walk-Behind Mower Service Repair Manual.pdfshun96145luo
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides general specifications, repair specifications, fuel and lubricant recommendations, and locations for identifying serial numbers. The document outlines sections for engine repair, fuel and air systems, electrical systems, power train, and miscellaneous repair for different mower models. It also includes sections for operational tests, adjustments, and diagnostics.
John Deere 6-414T OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid navigation.
- Specification tables for torque values and engine data.
The manual is intended as a reference for experienced technicians servicing these engines, with concise instructions and specifications rather than theoretical background. References to additional "FOS Manuals" are included for trainees or more complex issues.
John Deere 6-414D OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid in navigation.
- Tables providing engine model numbers covered, torque specifications for hardware, and an introduction on how technicians should use the manual in conjunction with fundamentals manuals.
The document aims to equip technicians with both general background and specific technical details to service the 300 Series engine models through its organized layout and comprehensive coverage of systems.
John Deere 6-359T OEM Engine Service Repair Manual.pdfshun96145luo
This document provides an overview and table of contents for a technical manual covering 300 Series OEM Engines. It includes:
- Sections covering the engine and its components, auxiliary systems, electrical systems, sheet metal, PTO drive, and system testing.
- An index listing components and procedures alphabetically to aid in navigation.
- Tables providing engine model numbers covered, torque specifications for hardware, and an introduction on how technicians should use the manual in conjunction with fundamentals manuals.
The document aims to equip technicians with both general background and specific technical details to service the engines through concise sections and an accessible contents and index structure.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F EXCAVATOR KBY
Configuration: 323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines for Caterpillar Built Machines
Media Number -UENR4468-15 Publication Date -01/06/2015 Date Updated -30/10/2018
i05018640
Rear Power Take-Off (RPTO) - Remove
SMCS - 1165-011-RE
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
Start By:
a. Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove" for the
correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. If necessary, remove the OEM equipment from the rear power take-off (RPTO).
1/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g02069019
Illustration 2 g02069023
2. Remove bolts (1). Remove adapter (2) from flywheel housing (9). Remove O-ring seal (3)
(not shown).
2/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Note: Make a temporary mark on the adapter and the flywheel housing in order to show the
correct orientation of the adapter.
3. Remove bolts (4). Remove adapter (5) from flywheel housing (9). Remove O-ring seal (6)
(not shown).
Note: Make a temporary mark on the adapter and the flywheel housing in order to show the
correct orientation of the adapter.
4. Remove gear (7) from crankshaft (8).
5. If necessary, follow Steps 5.a through Steps 5.b in order to remove the sleeve bearing from
the adapter.
a. Place adapter (2) onto suitable support.
b. Use Tooling (A) and a suitable press in order to remove sleeve bearing (10) from
adapter (2).
6. Repeat Steps 6.a through Step 6.b in order to remove the sleeve bearing from adapter (5).
a. Place adapter (5) onto suitable support.
b. Use Tooling (A) and a suitable press in order to remove sleeve bearing (10) from
adapter (5).
Illustration 3 g02069020
3/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 7. Remove gear assembly (11) and gear assembly (12) from flywheel housing (9).
Illustration 4 g02069021
Illustration 5 g02069453
8. Remove bolts (13). Remove gear (17) and idler hub (15) from flywheel housing (9).
4/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 9. Remove bolts (14). Remove gear (18) and idler hub (16) from flywheel housing (9).
10. If necessary, follow Steps 10.a through Steps 10.b in order to remove the sleeve bearing
from the gear.
a. Place gear (17) onto suitable support.
b. Use Tooling (A) and a suitable press in order to remove sleeve bearing (19) from gear
(17).
Illustration 6 g03453499
11. Repeat Steps 11.a through Step 11.b in order to remove the sleeve bearing from the
remaining gear.
a. Place gear (18) onto suitable support.
b. Use Tooling (A) and a suitable press in order to remove sleeve bearing (19a) from
gear (18).
5/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 7 g02069024
12. If necessary, follow Steps 12.a through Steps 12.b in order to remove the sleeve bearings
from the flywheel housing.
a. Use a suitable tool in order to remove sleeve bearing (20) from flywheel housing (9).
b. Repeat Step 12.a in order to remove sleeve bearing (21) from flywheel housing (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 19 09:16:04 UTC+0800 2020
6/6
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F EXCAVATOR KBY
Configuration: 323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines for Caterpillar Built Machines
Media Number -UENR4468-15 Publication Date -01/06/2015 Date Updated -30/10/2018
i05018641
Rear Power Take-Off (RPTO) - Install
SMCS - 1165-012-RE
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0520 Driver Group 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that all components of the rear power take-off (RPTO) are clean and free from wear
and damage.
1/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 1 g02070454
2/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 2 g02069024
2. If necessary, follow Steps 2.a through Steps 2.c in order to install the sleeve bearings from
the flywheel housing.
a. Accurately align oil Holes (X) in sleeve bearing (20) with the oil holes in flywheel
housing (9).
b. Use Tooling (A) in order to install sleeve bearing (20) into flywheel housing (9).
Note: Ensure that the oil holes are correctly aligned. If the oil holes are not correctly
aligned, the sleeve bearing should be removed.
c. Repeat Step 2.a through Steps 2.b in order to install sleeve bearing (21) to flywheel
housing (9).
3/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 3 g02070455
3. If necessary, follow Steps 3.a through Steps 4 in order to install the sleeve bearing to the
gears.
a. Place gear (17) onto suitable support.
b. Accurately align Grooves (Z) in sleeve bearing (19) with Grooves (Y) in gear (17).
c. Use Tooling (A) and a suitable press in order to install sleeve bearing (19) into gear
(17).
4/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 4 g03453500
4. Repeat Steps 3.a through Step 3.c in order to install the sleeve bearing to gear (18).
a. Place gear (18) onto suitable support.
b. Accurately align Grooves (Z) in sleeve bearing (19a) with Grooves (Y) in gear (18).
c. Use Tooling (A) and a suitable press in order to install sleeve bearing (19a) into gear
(18).
5/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 5 g02069021
5. Lubricate idler hub (15) and gear (17) with clean oil. Install idler hub (15) to gear (17).
Note: Ensure that the gear and the idler hub are correctly oriented.
6. Install gear (17) and idler hub (15) assembly to flywheel housing (9).
Note: Ensure that the oil hole in the idler hub is correctly positioned.
7. Install bolts (13) to idler hub (15) and hand tighten bolts.
Note: Ensure that the idler hub is correctly aligned to the flywheel housing.
8. Repeat Steps 5 through Step 7 in order to install gear (18), idler hub (16) and bolts (14) to
flywheel housing (9).
9. Tighten bolts (13) and bolts (14) to a torque of 100 N·m (74 lb ft).
10. Ensure that there is tactile backlash between gear (17) and gear (18). Ensure that there is
end play between the idler hubs and the gears.
6/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 6 g02069020
11. install gear assembly (11) and gear assembly (12) to flywheel housing (9).
7/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 7 g02069019
8/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 8 g02070473
12. If necessary, follow Steps 12.a through Steps 12.c in order to install the sleeve bearings to
the adapters.
a. Place adapter (2) onto suitable support.
b. Use Tooling (A) and a suitable press in order to install sleeve bearing (10) into
adapter (2).
c. Repeat Steps 12.a through Step 12.b in order to install the sleeve bearing into adapter
(5).
13. Install a new O-ring seal (3) (not shown) to adapter (2).
14. Install adapter (2) to flywheel housing (9).
Note: Ensure correct orientation of the adapter.
15. Install bolts (1) and tighten the bolts to a torque of 55 N·m (41 lb ft).
16. Install a new O-ring seal (6) (not shown) to adapter (5).
17. Install adapter (5) to flywheel housing (9).
Note: Ensure correct orientation of the adapter.
18. Install bolts (4) and tighten the bolts to a torque of 55 N·m (41 lb ft).
9/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 19. Ensure that there is tactile backlash between the gears. Ensure that there is end play between
the gears and the flywheel housing and the adapters.
20. Install gear (7) to crankshaft (8).
21. If necessary, install the OEM equipment to the rear power take-off (RPTO).
End By:
a. Install the flywheel. Refer to Disassembly and Assembly, "Flywheel - Install" for the correct
procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 19 09:17:04 UTC+0800 2020
10/10
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M00...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F EXCAVATOR KBY
Configuration: 323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines for Caterpillar Built Machines
Media Number -UENR4468-15 Publication Date -01/06/2015 Date Updated -30/10/2018
i05909511
Vibration Damper and Pulley - Remove
SMCS - 1205-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M14 x 1.5 by 100 mm
1
B 227-4393 E18 Torx Socket 1
Start By:
A. Remove the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove
and Install" for the correct procedure.
Note: The weight of the assembly of the crankshaft pulley, the vibration damper, and the
crankshaft adapter is approximately 22 kg (48 lb).
1/3
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 1 g02368017
1. Use a suitable tool in order to prevent the crankshaft from rotating. Use Tooling (B) to
remove one Torx screws (1) from crankshaft pulley assembly (2) .
2. Install Tooling (A) into crankshaft pulley assembly (2) .
3. Remove remaining Torx screws (1) from crankshaft pulley assembly (2) .
4. Remove crankshaft pulley assembly (2) .
5. Remove Tooling (A) .
2/3
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 2 g02368018
6. If necessary, follow Step 6.a through Step 6.b in order to remove friction shim (3) from the
crankshaft.
a. Remove the front seal from the front cover. Refer to Disassembly and Assembly,
"Crankshaft Front Seal - Remove and Install" for the correct procedure.
b. Remove friction shim (3) .
7. If necessary, follow Step 7.a through Step 7.c in order to disassemble vibration damper,
crankshaft pulley from crankshaft adapter.
a. Place the crankshaft pulley assembly onto a suitable support.
b. Remove bolts (7) from crankshaft pulley assembly (2) .
c. Remove vibration damper (6) and crankshaft pulley (5) from adapter (4) .
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 19 09:18:03 UTC+0800 2020
3/3
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F EXCAVATOR KBY
Configuration: 323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines for Caterpillar Built Machines
Media Number -UENR4468-15 Publication Date -01/06/2015 Date Updated -30/10/2018
i05909517
Vibration Damper and Pulley - Install
SMCS - 1205-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A -
Guide Stud
M14 x 1.5 by 100 mm
1
B 227-4393 E18 Torx Socket 1
C 8T-3052 Degree Wheel 1
D -
Guide Studs
M12 x 1.75 by 50 mm
2
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g02368018
1. Ensure that the crankshaft adapter and the front of the crankshaft are clean and free from
damage.
2. Inspect vibration damper (6) for damage. If necessary, replace the vibration damper.
3. If necessary, follow Step 3.a through Step 3.f in order to install vibration damper, crankshaft
pulley to crankshaft adapter.
a. Place crankshaft adapter (4) onto a suitable support.
b. Install Tooling (D) crankshaft adapter (4) .
c. Install crankshaft pulley (5) and vibration damper (6) over Tooling (D) .
d. Install bolts (7) to the crankshaft pulley assembly.
Note: Evenly space bolts (7) around the crankshaft pulley assembly.
e. Remove Tooling (D) .
f. Tighten bolts (7) to a torque of 115 N·m (85 lb ft).
4. If necessary, install friction shim (3) . Follow Step 4.a through Step 4.b in order to install
friction shim (3) .
a. Install friction shim (3) .
2/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. b. Install a new front seal to the front cover. Refer to Disassembly and Assembly,
"Crankshaft Front Seal - Remove and Install" for the correct procedure.
5. Install Tooling (A) to the crankshaft.
Illustration 2 g02368017
6. Install crankshaft pulley assembly (2) onto the crankshaft.
7. Install one Torx screws (1) to crankshaft pulley assembly (2) hand tighten.
8. Remove Tooling (A) .
9. Install remaining Torx screws (1) to crankshaft pulley assembly (2) .
10. Use a suitable tool in order to prevent the crankshaft from rotating. Tighten Torx screws (1)
to a torque of 40 N·m (29 lb ft).
11. Use Tooling (B) and Tooling (C) to turn Torx screws (1) through an additional 120 degrees.
End By: Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt -
Remove and Install" for the correct procedure.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Wed Aug 19 09:19:02 UTC+0800 2020
3/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323F EXCAVATOR KBY
Configuration: 323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
C7.1 Engines for Caterpillar Built Machines
Media Number -UENR4468-15 Publication Date -01/06/2015 Date Updated -30/10/2018
i05018646
Crankshaft Front Seal - Remove and Install - Crankshaft
Front Seal for Heavy Duty Front Cover
SMCS - 1160-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 278-2636 Front Oil Seal Removal Tool 1
Start By:
a. Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Vibration Damper and
Pulley - Remove" for the correct procedure.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 1 g02048634
1. Position Tooling (A) on the nose of the crankshaft. Screw Tooling (A) into crankshaft front
seal (2).
Note: Do not damage the edge of the front cover for the crankshaft front seal.
2. Screw the bolt into Tooling (A) in order to remove crankshaft front seal (2) from front cover
(1).
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
B
9U-6206 Stud Front Seal Installer 1
9U-6207 Plate 1
9U-6209 Sleeve Plate 1
9U-6211 Seal Installer Tool 1
366-5984 Installer Assembly 1
2/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Ensure that the bore for the crankshaft front oil seal in the front cover is clean and free from
damage.
Illustration 2 g03417117
2. Assemble Tooling (B).
3. Correctly position a new crankshaft front seal (2) to front cover (1).
Note: If the crankshaft front seal is supplied with a sleeve, remove the sleeve from the
crankshaft front seal before installation.
4. Use Tooling (B) to install crankshaft front seal (2) to front cover (1). Ensure that the front
face of the crankshaft front seal is installed to a depth of 6.5 ± 0.2 mm (0.256 ± 0.008 inch).
5. Remove Tooling (B) from the crankshaft.
End By:
3/4
323F L Excavators KBY00001-UP (MACHINE) POWERED BY C7.1 Engine(M0066...
2020/8/19
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...