This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, check valves, fittings, piston guide, brake piston, barrel assembly and more. The assembly section lists 24 steps to reinstall these components in reverse order, noting proper orientation and cleaning of parts. Precautions are provided to avoid damage and ensure correct installation of components like the cam plate and piston shoe assemblies.
Caterpillar cat 323 d2 l excavator (prefix tdt) service repair manual (tdt000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor on a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, and shaft. The assembly section lists 13 steps like installing seals, the shaft assembly, cam plate, and reassembling the barrel assembly components in their original positions and orientations. Precise alignment marks and tooling are required to properly reinstall parts in the travel motor.
Caterpillar cat 323 d2 l excavator (prefix pjp) service repair manual (pjp000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, barrel assembly, brake piston, and shaft. The assembly process describes 23 steps and includes precautions to ensure correct installation of components like the cam plate, piston shoe assemblies, and seals. Special tools may be required and clean hydraulic oil should be applied to sliding surfaces during reassembly.
Caterpillar cat 323 d2 l excavator (prefix flc) service repair manual (flc000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, barrel assembly, piston guide, brake piston, and shaft assembly. The assembly process describes 25 steps and requires applying clean oil and ensuring components like the cam plate and keys are correctly installed. Special tools and cautions are noted to properly complete the work.
Caterpillar cat 323 d l excavator (prefix sdc) service repair manual (sdc0000...fjskksmem
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly instructions, listing 27 steps to remove components such as the head, check valves, fittings, seals, brake piston, plates, and shaft. It then provides assembly instructions in 25 steps, listing the components to be installed in reverse order, and noting to clean parts and apply oil or seals at various steps. Precise positioning and alignment of parts is emphasized to ensure proper reassembly.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 318 d2 l excavator (prefix xah) service repair manual (xah000...fjskekdmjekm
This document provides instructions for disassembling and assembling the travel motor of a 318D2 L excavator. The disassembly process involves removing 27 different components from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and provides additional warnings to ensure proper installation of components like the cam plate. Precise alignment of parts is critical for correct function of the travel motor.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
This document provides instructions for disassembling and assembling the travel motor of a 320D2 GC excavator. The disassembly procedure outlines 27 steps to fully disassemble the travel motor. These include removing the head, brake piston, piston guide, barrel assembly, and other components. The assembly procedure then lists 28 steps to reassemble all components in the reverse order, making sure to clean parts and apply the proper seals, oils, and torques. Precise alignment of parts is important for correct reassembly.
Caterpillar cat 323 d2 l excavator (prefix tdt) service repair manual (tdt000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor on a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, and shaft. The assembly section lists 13 steps like installing seals, the shaft assembly, cam plate, and reassembling the barrel assembly components in their original positions and orientations. Precise alignment marks and tooling are required to properly reinstall parts in the travel motor.
Caterpillar cat 323 d2 l excavator (prefix pjp) service repair manual (pjp000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, barrel assembly, brake piston, and shaft. The assembly process describes 23 steps and includes precautions to ensure correct installation of components like the cam plate, piston shoe assemblies, and seals. Special tools may be required and clean hydraulic oil should be applied to sliding surfaces during reassembly.
Caterpillar cat 323 d2 l excavator (prefix flc) service repair manual (flc000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, barrel assembly, piston guide, brake piston, and shaft assembly. The assembly process describes 25 steps and requires applying clean oil and ensuring components like the cam plate and keys are correctly installed. Special tools and cautions are noted to properly complete the work.
Caterpillar cat 323 d l excavator (prefix sdc) service repair manual (sdc0000...fjskksmem
The document provides step-by-step instructions for disassembling and assembling a travel motor. It begins with disassembly instructions, listing 27 steps to remove components such as the head, check valves, fittings, seals, brake piston, plates, and shaft. It then provides assembly instructions in 25 steps, listing the components to be installed in reverse order, and noting to clean parts and apply oil or seals at various steps. Precise positioning and alignment of parts is emphasized to ensure proper reassembly.
Caterpillar cat 315 d l excavator (prefix cjn) service repair manual (cjn0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing bolts, seals, plates, and other components. It then lists 26 steps for assembly, which involves cleaning components, applying seals and lubricants, and reinstalling components in reverse order of disassembly. Special care must be taken to align parts properly and not damage surfaces.
Caterpillar cat 318 d2 l excavator (prefix xah) service repair manual (xah000...fjskekdmjekm
This document provides instructions for disassembling and assembling the travel motor of a 318D2 L excavator. The disassembly process involves removing 27 different components from the travel motor in a specific sequence. The assembly process reverses the disassembly steps and provides additional warnings to ensure proper installation of components like the cam plate. Precise alignment of parts is critical for correct function of the travel motor.
Caterpillar cat 315 d l excavator (prefix jha) service repair manual (jha0000...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It lists 27 steps for disassembly that include removing the head, check valves, fittings, brake piston, friction plates, and other components. It then lists 26 steps for assembly that describe cleaning and installing components like the shaft assembly, cam plate, barrel assembly, brake piston, and seals in the reverse order of disassembly. Precise alignment of parts and use of identification marks are emphasized to ensure correct reassembly.
This document provides instructions for disassembling and assembling the travel motor of a 320D2 GC excavator. The disassembly procedure outlines 27 steps to fully disassemble the travel motor. These include removing the head, brake piston, piston guide, barrel assembly, and other components. The assembly procedure then lists 28 steps to reassemble all components in the reverse order, making sure to clean parts and apply the proper seals, oils, and torques. Precise alignment of parts is important for correct reassembly.
Caterpillar cat 323 d l excavator (prefix cwg) service repair manual (cwg0000...fjskksmem
The document provides instructions for removing and installing the crankshaft on a Caterpillar C6.4 engine. To remove the crankshaft, the front housing, rear seal, flywheel housing and oil pan must first be removed. Then the connecting rod caps, main bearing caps and pistons can be taken off to allow removal of the crankshaft. Installation follows the reverse order, with care taken to clean parts and apply specified torques. End play must be checked after installation is complete.
Caterpillar cat 320 d l excavator (prefix kgf) service repair manual (kgf0000...fkjsekksmem
This document provides instructions for disassembling and assembling the travel motor of a 320D L excavator. The disassembly process includes 27 steps to remove components like the head, fittings, seals, brake piston, plates, and barrel assembly. The assembly section outlines 13 steps including installing seals, keys, cam plate, springs, and piston shoe assemblies back into the barrel assembly and body of the travel motor. Special care must be taken to align parts properly and not allow components to separate during disassembly and assembly.
This document provides instructions for disassembling and assembling the travel motor of a 313D2 excavator. The disassembly process involves removing 27 different components from the travel motor body in a specific sequence. The assembly process reverses the disassembly steps and provides additional details like applying lubricants and installing components in their original positions and orientations. Proper assembly requires using the correct tools and following all notes, illustrations, and installation procedures carefully to prevent damage.
Caterpillar cat 330 c l excavator (prefix jnk) service repair manual (jnk0000...hhjsekmdmm
The document provides installation instructions for a gear pump used in the fan drive of an excavator. It outlines 20 steps to assemble the piston motor that drives the hydraulic fan. These include pressing bearings onto shafts, installing springs, O-rings, seals, and housing components in the proper order and orientation. Precautions are given to ensure cleanliness and prevent injury from parts under pressure.
The document provides instructions for disassembling and assembling a travel motor. It is a service repair manual for Caterpillar 330D2 and 330D2 L excavators. The disassembly procedure involves removing 28 different parts from the travel motor in 27 steps. The assembly procedure involves installing the parts in the reverse order over 23 steps. Precise alignment and cleanliness of parts is emphasized to ensure proper function.
Caterpillar cat 305.5 d mini excavator (prefix flz) service repair manual (fl...fikskkdmmd1
The document provides instructions for removing the hydraulic tank from a 305.5D mini excavator. It instructs the technician to first remove the main control valve. It then lists the specific hoses, tubes, and connections that must be disconnected from the tank. Finally, it instructs using lifting brackets to detach the hydraulic tank from the excavator frame. The goal is to remove the tank while containing any spilled fluids.
Caterpillar cat 323 d2 l excavator (prefix ycr) service repair manual (ycr000...fusjejkdkmse
The document provides step-by-step instructions for disassembling and assembling the travel motor of a 323D2 L excavator. It lists 27 steps for disassembly, removing components like the head, check valves, fittings, seals, piston guide, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, reinstalling these components in reverse order and ensuring proper alignment of parts. Special care must be taken with components like the cam plate and keys to avoid damage during assembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...ufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, check valves, fittings, brake piston, friction plates, barrel assembly and shaft. The assembly process describes 25 steps and requires cleaning and lubricating components before reinstalling them in the reverse order of disassembly. Special care must be taken with aligning parts and ensuring correct assembly of components like the cam plate and barrel assembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...prmy389342
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and cautions are noted throughout to correctly reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special care is noted to keep mating surfaces clean and mark components for reinstallation in their original positions.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...f7fujksekmdm8u
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special tools and torque specifications are listed to reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 23 steps like installing seals, keys, cam plate and barrel assembly components. Special care must be taken to mark parts for proper reinstallation.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...zan2736ban
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and cautions are noted throughout to correctly reassemble the travel motor.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...idkdkddmd
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special tools and torque specifications are listed to reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...fjkskekxsdcmdmme
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, check valves, fittings, brake piston, friction plates, barrel assembly and shaft. The assembly process describes 25 steps and requires cleaning and lubricating components before reinstalling them in the reverse order of disassembly. Special care must be taken with aligning parts and ensuring correct assembly of components like the cam plate and barrel assembly.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor on a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, cam plate and shaft. The assembly section lists 13 steps and includes applying sealant, installing seals and using a press to reinstall components in the reverse order of disassembly. Precise alignment of parts is emphasized and tools required are a driver and sealant.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...f7fujksekmdm8u
The document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. It lists 27 steps for disassembly, which include removing the head, brake piston, barrel assembly, and other components. It then lists 13 steps for assembly, which involve installing seals, the shaft assembly, cam plate, springs and other parts back into the travel motor body. Safety precautions are noted, such as containing fluids and applying sealant to surfaces.
Caterpillar cat 323 d l excavator (prefix cwg) service repair manual (cwg0000...fjskksmem
The document provides instructions for removing and installing the crankshaft on a Caterpillar C6.4 engine. To remove the crankshaft, the front housing, rear seal, flywheel housing and oil pan must first be removed. Then the connecting rod caps, main bearing caps and pistons can be taken off to allow removal of the crankshaft. Installation follows the reverse order, with care taken to clean parts and apply specified torques. End play must be checked after installation is complete.
Caterpillar cat 320 d l excavator (prefix kgf) service repair manual (kgf0000...fkjsekksmem
This document provides instructions for disassembling and assembling the travel motor of a 320D L excavator. The disassembly process includes 27 steps to remove components like the head, fittings, seals, brake piston, plates, and barrel assembly. The assembly section outlines 13 steps including installing seals, keys, cam plate, springs, and piston shoe assemblies back into the barrel assembly and body of the travel motor. Special care must be taken to align parts properly and not allow components to separate during disassembly and assembly.
This document provides instructions for disassembling and assembling the travel motor of a 313D2 excavator. The disassembly process involves removing 27 different components from the travel motor body in a specific sequence. The assembly process reverses the disassembly steps and provides additional details like applying lubricants and installing components in their original positions and orientations. Proper assembly requires using the correct tools and following all notes, illustrations, and installation procedures carefully to prevent damage.
Caterpillar cat 330 c l excavator (prefix jnk) service repair manual (jnk0000...hhjsekmdmm
The document provides installation instructions for a gear pump used in the fan drive of an excavator. It outlines 20 steps to assemble the piston motor that drives the hydraulic fan. These include pressing bearings onto shafts, installing springs, O-rings, seals, and housing components in the proper order and orientation. Precautions are given to ensure cleanliness and prevent injury from parts under pressure.
The document provides instructions for disassembling and assembling a travel motor. It is a service repair manual for Caterpillar 330D2 and 330D2 L excavators. The disassembly procedure involves removing 28 different parts from the travel motor in 27 steps. The assembly procedure involves installing the parts in the reverse order over 23 steps. Precise alignment and cleanliness of parts is emphasized to ensure proper function.
Caterpillar cat 305.5 d mini excavator (prefix flz) service repair manual (fl...fikskkdmmd1
The document provides instructions for removing the hydraulic tank from a 305.5D mini excavator. It instructs the technician to first remove the main control valve. It then lists the specific hoses, tubes, and connections that must be disconnected from the tank. Finally, it instructs using lifting brackets to detach the hydraulic tank from the excavator frame. The goal is to remove the tank while containing any spilled fluids.
Caterpillar cat 323 d2 l excavator (prefix ycr) service repair manual (ycr000...fusjejkdkmse
The document provides step-by-step instructions for disassembling and assembling the travel motor of a 323D2 L excavator. It lists 27 steps for disassembly, removing components like the head, check valves, fittings, seals, piston guide, barrel assembly, and shaft assembly. It then lists 26 steps for assembly, reinstalling these components in reverse order and ensuring proper alignment of parts. Special care must be taken with components like the cam plate and keys to avoid damage during assembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...ufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, check valves, fittings, brake piston, friction plates, barrel assembly and shaft. The assembly process describes 25 steps and requires cleaning and lubricating components before reinstalling them in the reverse order of disassembly. Special care must be taken with aligning parts and ensuring correct assembly of components like the cam plate and barrel assembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...prmy389342
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and cautions are noted throughout to correctly reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special care is noted to keep mating surfaces clean and mark components for reinstallation in their original positions.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...f7fujksekmdm8u
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...8ufjsekddm8u
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special tools and torque specifications are listed to reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fijsekkdmdm2w
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly process reverses the disassembly with 23 steps like installing seals, keys, cam plate and barrel assembly components. Special care must be taken to mark parts for proper reinstallation.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...zan2736ban
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and cautions are noted throughout to correctly reassemble the travel motor.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...idkdkddmd
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the head, brake piston, barrel assembly, shoe retainer, and shaft assembly. The assembly section outlines 14 steps, including installing seals, the shaft assembly, cam plate, and barrel assembly components while ensuring proper alignment of keys and pins. Special tools and torque specifications are listed to reassemble the travel motor.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fujkskemdmdm4r
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual (XBK0000...km7seydwuhdw
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix XBK) Service Repair Manual Instant ...fskekkdmdmdm3e
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, brake piston, barrel assembly, and shaft assembly. The assembly process describes 25 steps and includes installing seals, plates, springs and ensuring proper alignment of components. Special tools and precautions are noted to correctly reinstall parts in their original positions and prevent damage during the travel motor's reassembly.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...fjkskekxsdcmdmme
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process involves 27 steps to remove components such as the head, check valves, fittings, brake piston, friction plates, barrel assembly and shaft. The assembly process describes 25 steps and requires cleaning and lubricating components before reinstalling them in the reverse order of disassembly. Special care must be taken with aligning parts and ensuring correct assembly of components like the cam plate and barrel assembly.
Caterpillar cat 323 d2 l excavator (prefix xbk) service repair manual (xbk000...fusjejkdkmse
This document provides instructions for disassembling and assembling the travel motor on a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, cam plate and shaft. The assembly section lists 13 steps and includes applying sealant, installing seals and using a press to reinstall components in the reverse order of disassembly. Precise alignment of parts is emphasized and tools required are a driver and sealant.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...f7fujksekmdm8u
The document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. It lists 27 steps for disassembly, which include removing the head, brake piston, barrel assembly, and other components. It then lists 13 steps for assembly, which involve installing seals, the shaft assembly, cam plate, springs and other parts back into the travel motor body. Safety precautions are noted, such as containing fluids and applying sealant to surfaces.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...f8uesjdkdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, and shaft. The assembly process describes 25 steps and includes precautions to ensure correct installation of components like the cam plate, piston shoe assemblies, and brake piston. Special tools may be required and clean hydraulic oil should be applied to sealing surfaces during reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...ufjksemd8ujd
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, and shaft. The assembly section lists 24 steps to reinstall these components in the reverse order, noting proper orientation and cleaning of parts. Precautions are provided to avoid damaging components and ensure correct assembly.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...jdkskmdmdm
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, and shaft. The assembly process describes 25 steps and includes precautions to ensure correct installation of components like the cam plate, piston shoe assemblies, and brake piston. Special tools may be required and clean hydraulic oil should be applied to sealing surfaces during reassembly.
Caterpillar Cat 323D2 L Excavator (Prefix TDT) Service Repair Manual (TDT0000...prmy389342
This document provides instructions for disassembling and assembling the travel motor of a 323D2 L excavator. The disassembly process includes 27 steps to remove components like the motor head, brake piston, barrel assembly, and shaft. The assembly process describes 25 steps and includes installing seals, plates, springs and reassembling components in reverse order using alignment marks and clean hydraulic oil. Special care must be taken with components like the cam plate to ensure correct alignment during reassembly.
Similar to Caterpillar cat 323 d2 l excavator (prefix ycr) service repair manual (ycr00001 and up) (20)
Kubota v3800 di t-e3cb diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document consists of detailed checklists for performing maintenance at regular intervals, with items to check daily, every 50 hours, 250 hours, 500 hours, 1000 hours, and longer intervals. It concludes by listing special tools needed for servicing the engines.
Kubota v3800 di t-e3bg diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then lists general precautions and a maintenance checklist. The bulk of the document provides detailed checklists for various maintenance intervals, from daily checks to every 3000 hours. It concludes with an overview of special tools needed for servicing.
Kubota v3800 di t-e3b diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document lists check points that should be performed at regular intervals, such as daily, every 50 hours, every 250 hours, and annually. It concludes by listing special tools that may be required for maintenance and servicing.
Kubota v3600 t-e3 cb diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document lists check points that should be performed at regular intervals, such as daily, every 50 hours, every 250 hours, and annually. It concludes by listing special tools that may be required for maintenance and servicing.
Kubota v3600 t-e3 bg diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then lists general precautions and a maintenance checklist. The bulk of the document provides detailed checklists for various maintenance intervals, from daily checks to every 3000 hours. It concludes with an overview of special tools needed for servicing.
Kubota v3600 t-e3 b diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document consists of detailed checklists for performing maintenance at regular intervals, with items to check daily, every 50 hours, 250 hours, 500 hours, 1000 hours, and longer intervals. It concludes by listing special tools needed for servicing tasks.
Kubota v3600 e3 cb diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document lists check points that should be performed at regular intervals, such as daily, every 50 hours, every 250 hours, and annually. It concludes by listing special tools that may be required for maintenance and servicing.
Kubota v3300 t-e2 b diesel engine service repair manualfjkskekxsdcmdmme
The document provides information on servicing a diesel engine. It begins with identifying the engine model and serial number. The second part describes the engine identification codes and emission control details. The third part lists general precautions for servicing including arranging removed parts carefully, using special tools as required, and disconnecting the battery before working on live wires.
Kubota v3300 e3 bg diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document lists check points that should be performed at regular intervals, such as daily, every 50 hours, every 250 hours, and annually. It concludes by listing special tools that may be required for maintenance and servicing.
Kubota v3300 e2 b diesel engine service repair manualfjkskekxsdcmdmme
The document provides information on servicing a diesel engine. It begins with identifying the engine model and serial number. The second part describes the engine identification codes and emission control details. The third part lists general precautions for servicing including arranging removed parts carefully, using special tools as required, and disconnecting the battery before working on live wires.
This document provides a summary of tractor transmission mechanisms, including:
1. Sliding mesh, constant mesh, and synchronous mesh transmission gears that transfer power from the clutch to the wheels.
2. Hydraulic shuttle shift and swing shift mechanisms that allow changing direction without using the clutch.
3. Dual speed and hydrostatic transmission types that provide variable speed control through hydraulic components.
4. Glide shift transmissions that combine gear changes with continuously variable speed control for smooth shifting.
5. Power shift systems using electric and hydraulic components for automated gear changes based on vehicle speed or load.
Detailed diagrams and explanations are given for the construction and operation of various clutch, transmission, and
Hyundai 70 ds 7e forklift truck service repair manualfjkskekxsdcmdmme
This document provides an overview and outline of the contents of a service manual for a machine. It is divided into 8 sections that cover general information, removal and installation procedures, descriptions of the power train, brake, steering, hydraulic, electrical, and mast systems. The sections are further broken down into groups that describe the structure, operation, maintenance, troubleshooting, disassembly/assembly, and adjustment procedures for the various components within each system. Safety symbols are defined that will be used throughout the manual. Conversion tables are also provided to allow simple conversions between different units of measurement.
Kubota v3600 e3 b diesel engine service repair manualfjkskekxsdcmdmme
This document provides information on servicing Kubota diesel engines. It begins by outlining how to identify specific engine models and serial numbers. It then provides general safety precautions and a maintenance checklist. The bulk of the document lists check points that should be performed at regular intervals, such as daily, every 50 hours, every 250 hours, and annually. It concludes by listing special tools that may be required for maintenance and servicing.
Hyundai 70 df 7 forklift truck service repair manualfjkskekxsdcmdmme
This document provides an overview and outline of the contents of a service manual for a machine. It includes 8 sections that cover general information, removal and installation procedures, descriptions of the power train, brake, steering, hydraulic, electrical, and mast systems. Each section includes groups that describe the structures, operations, inspections, troubleshooting, disassembly/assembly procedures, and adjustments for the various components and systems. Conversion tables are also provided at the end to allow simple conversions between different units of measurement.
Hyundai 70 d 7e forklift truck service repair manualfjkskekxsdcmdmme
This document provides instructions for disassembling and assembling a steering unit. It includes diagrams labeling the parts and components. The instructions describe how to remove parts like the end cover, gearwheel set, cardan shaft, distributor plate, check valve, bearing races and thrust bearing. Reassembly instructions provide details on installing parts like the spool, sleeve, cross pin, neutral position springs, O-rings and lip seal in the correct order and orientation. Torque specifications are also provided for mounting bolts.
Hyundai 60 ds 7e forklift truck service repair manualfjkskekxsdcmdmme
This document provides an overview and outline of the contents of a service manual for a machine. It is divided into 8 sections that cover general information, removal and installation procedures, descriptions of the power train, brake, steering, hydraulic, electrical, and mast systems. The sections are further broken down into groups that describe the structure, operation, maintenance, troubleshooting, disassembly/assembly, and adjustment procedures for the various components within each system. Safety symbols are defined that will be used throughout the manual. Conversion tables are also provided as a reference.
Hyundai 60 df 7 forklift truck service repair manualfjkskekxsdcmdmme
This document provides an overview and outline of the contents of a service manual for a machine. It includes 8 sections that cover general information, removal and installation procedures, descriptions of the power train, brake, steering, hydraulic, electrical, and mast systems. Each section includes groups that describe the structures, operations, inspections, troubleshooting, disassembly/assembly procedures, and adjustments for the various components and systems. Conversion tables are also provided at the end to allow simple conversions between different units of measurement.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Cause The Headlights On Your Porsche 911 To Stop WorkingLancer Service
Discover why your Porsche 911 headlights might flicker out unexpectedly. From aging bulbs to electrical gremlins and moisture mishaps, we're delving into the reasons behind the blackout. Stay tuned to illuminate the road ahead and ensure your lights shine bright for safer journeys.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
What Is Recruitment Processing Outsourcing (RPO) Services?Impeccable HR
Impeccable HR provides a wide range of RPO services for your bulk hiring needs within a stipulated period. They meticulously build RPO solutions to improve your recruitment process. RPO services are great for budget-conscious recruiters who want high-quality personnel.
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323D2 L EXCAVATOR YCR
Configuration: 323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
323D2 Excavator Machine Systems
Media Number -UENR3338-02 Publication Date -01/07/2017 Date Updated -19/07/2017
i01219550
Travel Motor - Disassemble
SMCS - 4351-015
Disassembly Procedure
Start By:
a. Remove the travel motor.
Reference: Refer to Disassembly and Assembly, "Travel Motor - Remove" in this manual.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor to a suitable holding fixture in a vertical position. The weight of the
travel motor is 60 kg (132 lb).
1/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. 3. Put an alignment mark across the head and the body of the travel motor for assembly
purposes. The head must be reinstalled in the head's original position on the body of the
travel motor.
Illustration 1 g00510326
Note: During the removal of head (2) from the body of the travel motor, be careful not to
scratch or damage the mating surfaces of the components.
4. Remove socket head bolts (1).
5. Remove head (2) from the body of the travel motor.
Illustration 2 g00510341
2/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00510349
6. Turn over head (2).
7. Remove O-ring seal (6), shims (5), port plate (4), and bearing (3) from the head.
8. Remove the two check valve assemblies from the head.
Note: There is a retainer under spring (9). This retainer is a press fit in head (2). Do not
remove the retainer.
9. Insert a dowel rod with a small diameter into hole (X). Tap the dowel rod with a plastic
hammer in order to remove spring (9), poppet (8) and seat (7) from the head.
Illustration 4 g00510351
10. Remove three fittings (10) and plugs (11) from the head. Remove the O-ring seal from each
fitting.
Illustration 5 g00510352
11. Remove three O-ring seals (12) and washer set (13) from the body of the travel motor.
12. Place a shop towel over brake piston (14). Retain brake piston (14) by hand, and apply
approximately 525 kPa (75 psi) of shop air pressure to brake release port (Y). Make sure
that the shop air pressure is free of water. Brake piston (14) will move up the piston guide,
and out of the piston guide. Remove brake piston (14) from the body of the travel motor.
3/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00510353
13. Remove O-ring seal (15) from the brake piston. Remove backup ring (16) from the brake
piston.
14. Remove O-ring seal (17) from the brake piston. Remove backup ring (18) from the brake
piston.
Illustration 7 g00510356
15. Remove piston guide (19), five friction plates (20) and the four steel plates from the body of
the travel motor.
Illustration 8 g00510359
4/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 16. Remove O-ring seal (21) from the piston guide. Remove backup ring (22) from the piston
guide.
Illustration 9 g00510365
Note: Do not allow the components of barrel assembly (23) to come apart during the
removal from the travel motor. All of the components in the barrel assembly must be
reinstalled in the component's original location.
17. Use two large screwdrivers, as shown. Slowly remove barrel assembly (23) from the body
of the travel motor. Do not allow the components to fall apart.
Illustration 10 g00510502
Note: Shoe retainer (24) and piston shoe assemblies (25) are not serviced separately. Prior
to the removal of the shoe retainer and the piston shoe assemblies from barrel (26), put
identification marks on piston shoe assemblies (25) for assembly purposes. Identification
marks are used to identify the piston shoe assembly's location in shoe retainer (24) and
barrel (26). The piston shoe assemblies must be reinstalled in the piston shoe assembly's
original bores in the shoe retainer and the barrel.
18. Remove shoe retainer (24) and piston shoe assemblies (25) from barrel (26). Separate the
piston shoe assemblies from the shoe retainer.
5/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 11 g00510504
19. Remove guide (27), spacer (28) and springs (29) from the barrel.
Illustration 12 g00510547
20. Remove cam plate (30) from the body of the travel motor.
Illustration 13 g00510550
21. Remove two keys (31) and the two locating pins (not shown) from the body of the travel
motor.
6/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 14 g00510551
22. Remove O-ring seal (33) from the body of the travel motor.
23. Use a soft faced hammer to remove shaft assembly (34) from the body of the travel motor.
Remove the shaft assembly in the direction that is indicated by the arrow. Refer to
Illustration 14.
Illustration 15 g00510595
24. Remove retaining rings (35) from each side of bearing (36). Push shaft (34) out of bearing
(36) with a press.
Illustration 16 g00510598
7/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. 25. Remove inner race (37) from shaft (34).
Illustration 17 g00510599
26. Remove lip seal (38) from the body of the travel motor.
Illustration 18 g00510605
27. Remove two stoppers (39) and the two pistons from the body of the travel motor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 22 23:41:08 UTC+0800 2020
8/8
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323D2 L EXCAVATOR YCR
Configuration: 323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
323D2 Excavator Machine Systems
Media Number -UENR3338-02 Publication Date -01/07/2017 Date Updated -19/07/2017
i01706705
Travel Motor - Assemble
SMCS - 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-0510 Driver Gp 1
1. Make sure that all of the components of the travel motor are thoroughly clean and free of
dirt and debris prior to assembly.
Illustration 1 g00510595
2. Install retaining ring (35) in the groove on shaft (34).
3. Install bearing (36) on shaft (34) with a press. Install the bearing until the bearing contacts
the retaining ring.
1/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. 4. Install the other retaining ring on the opposite side of bearing (36).
Illustration 2 g00510598
5. Install inner race (37) on the end of shaft (34) until the inner race is seated against the
shoulder on the shaft.
Illustration 3 g00651891
(a) Body
6. Apply a thin coat of 5P-3413 Pipe Sealant on Surfaces (Y) of the body of the travel motor.
7. Use Tooling (A) in order to install lip seal (38).
8. Install lip type seal (38) in the body of the travel motor. Install the lip seal so that the sealing
lip is facing in the direction that is shown. Make sure that the lip seal contacts the
counterbore in the body of the travel motor.
Note: Slowly rotate shaft assembly (34) during the installation in order to make sure that the
shaft assembly does not bind in the body of the travel motor.
9. Apply clean hydraulic oil on the lip of lip seal (38).
2/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. 10. Use a press to install shaft assembly (34) in the body of the travel motor. Slowly rotate the
shaft during the installation in order to make sure that the shaft does not bind. Make sure
that the bearing on the shaft contacts the counterbore in the body of the travel motor.
Illustration 4 g00651960
NOTICE
The locating pin on each key is not centered. In order to prevent
damage to the barrel assembly during assembly of the travel motor, the
keys must be installed as shown. Also, the keys must be installed in the
key's original location in the body of the travel motor.
11. Install the two locating pins and two keys (31) in the body of the travel motor, as shown.
Illustration 5 g00510547
3/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. 12. Install cam plate (30) in the body of the travel motor in the cam plate's original location.
Make sure that the two pistons and two keys (31) in the body of the travel motor engage
properly with the cam plate.
Illustration 6 g00510504
13. Install nine springs (29) in the barrel. Install spacer (28) and guide (27) on the barrel.
Illustration 7 g00878253
14. Install piston shoe assemblies (25) in the piston shoe assembly's original bores in shoe
retainer (24).
15. Apply clean hydraulic oil in the bores of the barrel and on piston shoe assemblies (25).
Install the piston shoe assemblies with the shoe retainer in the piston shoe assembly's
original bore in barrel (26).
NOTICE
Make sure that the cam plate is correctly engaged with the two pistons
in the body of the travel motor prior to installing the barrel assembly.
When the body of the travel motor is tilted to allow the installation of
the barrel assembly, the cam plate can slide off of the two pistons. The
remaining parts of the travel motor can be assembled with the cam
plate in the incorrect position.
4/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Extensive damage will result from the incorrect installation of the cam
plate. Follow the exact installation procedure to prevent damage.
16. Apply clean hydraulic oil on the sliding surfaces of the cam plate, on the piston shoe
assemblies and on the splined shaft of the travel motor.
Illustration 8 g00485953
17. Route a piece of strong string through an opening for the cam plate tension adjusters. Route
the string over the sliding surface of cam plate (30) and through the opposite opening for the
cam plate tension adjusters. Hold the string taut in order to keep cam plate (30) correctly
engaged with keys (31). Keep the string taut and position the body of the travel motor on the
body's side. Do not release the tension on the string at this time. Install barrel assembly (23)
as a unit on the shaft. Pull the string out of the body of the travel motor. It may be necessary
to pull the barrel assembly and the piston shoe assemblies away from the cam plate slightly
in order to release the string.
Illustration 9 g00651967
5/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 18. Install O-ring seal (21) and backup ring (22) on piston guide (19), as shown.
Illustration 10 g00510356
19. Place the body of the travel motor in a vertical position.
20. Apply clean hydraulic oil on five friction plates (20) and the four steel plates. Install the
plates in alternating order in the body of the travel motor. Start with a friction plate and end
with a friction plate.
21. Install piston guide (19) in the body of the travel motor until the piston guide contacts the
counterbore in the body of the travel motor.
Illustration 11 g00878297
Note: Make sure that brake piston (14) is thoroughly clean and free of dirt and debris.
22. Install O-ring seal (16). Install backup ring (15).
23. Install O-ring seal (17). Install backup ring (18).
6/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 24. Apply a thin coat of hydraulic oil on the surfaces of piston (14) which contact the body of
the travel motor. Install piston (14) in the body of the travel motor by hand. It may be
necessary to use a soft faced hammer to seat the piston correctly.
Illustration 12 g00878299
Illustration 13 g00878239
25. Install washer set (12) in piston (14), as shown.
26. Install O-ring seals (13) in the body of the travel motor, as shown.
7/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 14 g00510605
27. Install the two pistons and two stoppers (39) in the housing of the travel motor. Tighten the
stoppers to a torque of 140 ± 14 N·m (105 ± 10 lb ft).
Illustration 15 g00510351
28. Install the O-ring seals on fittings (10). Apply 5P-3413 Pipe Sealant on the threads of
fittings (10). Install the fittings in the head, as shown.
29. Install plugs (11) in the head. Tighten each plug to a torque of 15 ± 2 N·m (11 ± 1 lb ft).
Illustration 16 g00510349
8/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 17 g00510341
30. Apply a thin coat of 9S-3263 Thread Lock Compound on the threads of the two check
valves. Install the check valves in the head.
31. Install seat (7), poppet (8) and spring (9) in the head at Location (X).
32. Install O-ring seal (6) in the head, as shown.
33. Install bearing (3) in the head until the bearing contacts the counterbore in the cover.
34. Apply 1U-6396 O-Ring Assembly Compound on port plate (4). Install the port plate in the
port plate's original position on the motor cover.
35. Use a shim or shims (5) so that the following requirements are met.
Note: During the following checks, turn the travel motor output shaft in a clockwise
direction.
a. The travel motor output shaft does not rotate with an applied torque of 440 N·m
(325 lb ft) or more with the parking brake release port open.
b. The travel motor output shaft rotates with an applied torque of 29 N·m (21 lb ft) or
less when the parking brake release port is pressurized to 780 kPa (115 psi) with both
the inlet port and the outlet port open to the hydraulic oil tank.
Note: It may be necessary to remove head (2) several times in order to determine the correct
thickness of shim or shims (5) that are used to adjust the rolling torque of the travel motor
output shaft.
36. Apply a thin layer of 5P-0960 Molybdenum Grease on shim or shims (5). Install the shim or
shims on the head. The grease will hold the shim or shims in place during the installation of
the head. Install the head on the body of the travel motor.
9/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 18 g00510326
37. Place head (2) in the head's original position on the travel motor. Install socket head bolts
(1) that secure the head. Tighten the socket head bolts to a torque of 175 ± 18 N·m
(130 ± 13 lb ft).
NOTICE
To prevent possible damage to the travel motor, fill the unit with oil at
least to the fill port before operating the machine. Refer to the
Operation and Maintenance Manual for the correct oil specification.
End By:
a. Install the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Install" in this
manual.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 22 23:42:07 UTC+0800 2020
10/10
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SE...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323D2 L EXCAVATOR YCR
Configuration: 323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
323D2 Excavator Machine Systems
Media Number -UENR3338-02 Publication Date -01/07/2017 Date Updated -19/07/2017
i03524320
Travel Motor - Install
SMCS - 4351-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod M16 by 381mm 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
1/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 1 g00651795
2. Install a new O-ring seal (5) . Apply clean hydraulic oil on O-ring seal (5) .
Illustration 2 g00707267
3. Attach a suitable lifting device to travel motor (4) , as shown. The weight of travel motor (4)
is approximately 57 kg (125 lb).
Illustration 3 g00944825
2/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. 4. Carefully install travel motor (4) on Tooling (A) . Slide travel motor (4) into the final drive.
5. Install bolt (2A) that secures travel motor (4) to the final drive.
6. Remove Tooling (A) .
Illustration 4 g00707275
Typical example
7. Install bolts (2) .
8. Connect hose assemblies (3) and (1) .
9. Fill the final drive with oil. Refer to Operation and Maintenance Manual, "Lubricant
Viscosities" for the proper oil viscosity. Refer to Operation and Maintenance Manual, "Final
Drive Oil Level - Check" for the correct filling procedure.
10. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return
filter.
Note: High efficiency filters should not be run for more than 250 hours before you change
back to the standard filters.
11. Obtain a hydraulic oil sample from the main S·O·S port. Refer to Operation and
Maintenance Manual, "Sampling Interval and Location of Sampling Valve" for the correct
location.
12. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system. Refer to Contamination
Control Guideline, SEBF8447 for further information.
End By: Install the counterbalance valve. Refer to Disassembly and Assembly, "Counterbalance
Valve (Travel) - Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 22 23:43:07 UTC+0800 2020
3/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 323D2 L EXCAVATOR YCR
Configuration: 323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine
Disassembly and Assembly
323D2 Excavator Machine Systems
Media Number -UENR3338-02 Publication Date -01/07/2017 Date Updated -19/07/2017
i05453056
Final Drive - Remove
SMCS - 4050-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C
154-6184 Forcing Bolt (M 20) 2
154-6185(1)
Forcing Bolt (M 24) 2
(1)
For Use on 329 and 330 sales models
Start By:
a. Separate the track assembly.
b. Remove the travel motor.
1/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00489826
Typical Example
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
1. Lift the side of the machine in order to install Tooling (A) under the frame, as shown.
Illustration 2 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight
lifting tension on the final drive.
Illustration 3 g00712737
2/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Note: Mark the orientation of bolt holes (2) for the travel motor for installation purposes.
3. Remove bolts (3) and the washers from the final drive.
Illustration 4 g00712749
4. Use Tooling (C) in order to remove the final drive from the frame.
5. Carefully remove final drive (1). The weight of final drive (1) and the sprocket is
approximately 312 kg (688 lb).
6. Remove Tooling (C) from the frame.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Sep 22 23:44:06 UTC+0800 2020
3/3
323D2 L Excavators YCR00001-UP (MACHINE) POWERED BY C7.1 Engine(SEB...
2020/9/22
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...