This service repair manual provides instructions for removing and installing various components of the heating and air conditioning system on a 320E and 320E L excavator. The components include the actuator motor, control module, refrigerant receiver-dryer, and various hoses and ducts. Detailed illustrations and safety warnings are provided to guide technicians through the disassembly and reassembly procedures.
Caterpillar cat 320 e excavator (prefix klt) service repair manual (klt00001 ...ujdjkkskmme
This service repair manual provides instructions for removing and installing various components of the heating and air conditioning system on a 320E and 320E L excavator. The components include the actuator motor, control module, refrigerant receiver-dryer, and various hoses and ducts. Detailed illustrations and cautions about working with refrigerant are provided to guide technicians through the disassembly and reassembly procedures.
Caterpillar cat 320 c l excavator (prefix ber) service repair manual (ber0000...yhfhjjkdksmme
The document provides instructions for removing and installing a refrigerant receiver-dryer on an excavator model 320C. Key steps include:
1. Recovering refrigerant from the air conditioning system using the proper tools.
2. Disconnecting two air conditioner hose assemblies from the refrigerant receiver-dryer by removing bolts and washers.
3. Removing the refrigerant receiver-dryer by taking out bolts and washers from the mounting bracket.
4. Installing the new refrigerant receiver-dryer by reversing the removal steps and using new O-rings on the hose assemblies.
This document provides instructions for removing and disassembling the control valve of a Caterpillar 232 Skid Steer Loader. It outlines the required tools and safety precautions. The removal process involves draining fluids, disconnecting hoses and wiring, and removing mounting bolts and brackets. The disassembly process describes removing fittings, seals, springs, spools, and other internal valve components. Proper precautions are recommended when removing pressurized or spring-loaded parts.
This document contains parts lists and diagrams for the engine and related components for a Massey Ferguson 8670 tractor with a Tier 2-3, 84 CTA engine that was phased out in 2011. It includes detailed part numbers and descriptions for the cylinder block, timing gear housing, alternator and bracket, and other engine parts. Footnotes provide additional information on specific part applications.
Caterpillar cat 262 c skid steer loader (prefix mst) service repair manual (m...ufjjsekkemmd
This document provides instructions for disassembling and assembling the control valve of a 262C Skid Steer Loader. The disassembly procedure involves removing 22 components from the control valve including hoses, nuts, cartridge assemblies, O-rings, solenoids, and springs. The assembly procedure instructs installing the components in reverse order and notes that cleanliness is important to prevent damage to precision parts. Safety precautions are provided to contain fluids and release spring forces carefully.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced. The components are to be removed and installed in the reverse order.
Caterpillar cat 320 e excavator (prefix klt) service repair manual (klt00001 ...ujdjkkskmme
This service repair manual provides instructions for removing and installing various components of the heating and air conditioning system on a 320E and 320E L excavator. The components include the actuator motor, control module, refrigerant receiver-dryer, and various hoses and ducts. Detailed illustrations and cautions about working with refrigerant are provided to guide technicians through the disassembly and reassembly procedures.
Caterpillar cat 320 c l excavator (prefix ber) service repair manual (ber0000...yhfhjjkdksmme
The document provides instructions for removing and installing a refrigerant receiver-dryer on an excavator model 320C. Key steps include:
1. Recovering refrigerant from the air conditioning system using the proper tools.
2. Disconnecting two air conditioner hose assemblies from the refrigerant receiver-dryer by removing bolts and washers.
3. Removing the refrigerant receiver-dryer by taking out bolts and washers from the mounting bracket.
4. Installing the new refrigerant receiver-dryer by reversing the removal steps and using new O-rings on the hose assemblies.
This document provides instructions for removing and disassembling the control valve of a Caterpillar 232 Skid Steer Loader. It outlines the required tools and safety precautions. The removal process involves draining fluids, disconnecting hoses and wiring, and removing mounting bolts and brackets. The disassembly process describes removing fittings, seals, springs, spools, and other internal valve components. Proper precautions are recommended when removing pressurized or spring-loaded parts.
This document contains parts lists and diagrams for the engine and related components for a Massey Ferguson 8670 tractor with a Tier 2-3, 84 CTA engine that was phased out in 2011. It includes detailed part numbers and descriptions for the cylinder block, timing gear housing, alternator and bracket, and other engine parts. Footnotes provide additional information on specific part applications.
Caterpillar cat 262 c skid steer loader (prefix mst) service repair manual (m...ufjjsekkemmd
This document provides instructions for disassembling and assembling the control valve of a 262C Skid Steer Loader. The disassembly procedure involves removing 22 components from the control valve including hoses, nuts, cartridge assemblies, O-rings, solenoids, and springs. The assembly procedure instructs installing the components in reverse order and notes that cleanliness is important to prevent damage to precision parts. Safety precautions are provided to contain fluids and release spring forces carefully.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced.
This document provides removal and installation instructions for various components of an excavator air conditioning system. It includes detailed steps and illustrations for safely removing and replacing components like the refrigerant receiver-dryer, control module, actuator motors, and tracks. Personal protective equipment and safety precautions are emphasized when working with refrigerants. Special tools may be required and are referenced. The components are to be removed and installed in the reverse order.
New holland w110 c tier 2 wheel loader service repair manualujdfjjjdfkkskemm
This document provides instructions for removing the engine from a Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator, hood, air intake components, and wiring harnesses. Safety measures are outlined such as releasing hydraulic pressure before removal. Proper lifting and support of heavy components is emphasized.
New holland w70 c hs tier 4b (final) compact wheel loader service repair manualujdfjjjdfkkskemm
This document is a service manual for New Holland compact wheel loaders W50C, W60C, W70C, and W80C. It contains instructions for repair and maintenance work to be performed only by qualified dealership personnel. The manual provides information on the engine, transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, and electrical systems of the loaders. Proper procedures are outlined for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging and welding.
New holland w70 c hs tier 4 compact wheel loader service repair manualujdfjjjdfkkskemm
This document provides instructions for removing an engine from a compact wheel loader. It describes disconnecting wiring harnesses and hoses, draining fluids, securing the engine hood with a lifting strap, removing mounting bolts, and carefully raising and removing the engine hood to access the engine. Proper safety procedures and equipment are emphasized.
New holland w60 c tc stage iiib compact wheel loader service repair manualujdfjjjdfkkskemm
This document is a service manual for CNH Industrial Italia S.p.A. compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides repair and maintenance instructions for technicians and mechanics.
New holland w50 tc wheel loader service repair manualujdfjjjdfkkskemm
This document provides repair manuals and technical specifications for W50TC, W60TC, W70TC, and W80TC wheel loaders. It includes sections on the engine, front and rear axles, braking system, hydraulic system, and their various components. Diagrams, dimensions, troubleshooting guides, and disassembly/reassembly instructions are provided to assist with maintenance and repairs.
New holland td5.115 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.105 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland tc5070 combine harvesters service repair manualujdfjjjdfkkskemm
This document is a service manual for TC5060, TC5070, and TC5080 combine models. It contains sections covering the engine, transmission, front axle system, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, residue handling, cleaning, and crop storage/unloading. It provides technical specifications and instructions for servicing and repairing components in these various systems.
New holland tc5060 hillside combine harvesters service repair manualujdfjjjdfkkskemm
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New holland tc5060 combine harvesters service repair manualujdfjjjdfkkskemm
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New holland tc40 da tractor service repair manualujdfjjjdfkkskemm
This document is the contents page for a repair manual for New Holland TC35A, TC35DA, TC40A, TC40DA, TC45A, and TC45DA tractors. It lists the sections and chapters contained within the repair manual, including the engine, clutch, transmission, driveline, front and rear axles, brakes, hydraulic system, steering, climate control, electrical systems, and platform. The document provides an overview of the complete contents and organization of the repair manual.
New holland tc5.90 hillside fpt nef tier 4 b combine harvesters service repai...ujdfjjjdfkkskemm
This document is a service manual that provides maintenance and repair instructions for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains over 190 sections organized by technical system, with each section dedicated to a specific component or function. The manual emphasizes that all repair work must only be performed by qualified dealership personnel using the proper tools and procedures.
New holland tc5.70 fpt nef 4 stage iv combine harvester service repair manualujdfjjjdfkkskemm
This document is a service manual for CNH Industrial combine harvesters including models TC4.90, TC5.70, TC5.80, TC5.90, and TC5.90 Hillside. The manual contains over 200 sections providing specifications, maintenance, and repair instructions for the combine's engine, transmission, axles, brakes, hydraulics, electrical systems, attachments, and all major operating systems. The sections are organized by functional area and component and include detailed diagrams, part numbers, and troubleshooting steps.
New holland t6090 range command tractor service repair manualujdfjjjdfkkskemm
This document is a service manual that provides technical information on the hydraulic, pneumatic, electrical, and electronic systems of various tractor models. It contains sections covering the primary and secondary hydraulic power systems, pneumatic system, electrical power system, electronic systems, engine and transmission systems, axles, brakes, steering, frame, cab, hitches, and working tools. The manual aims to help technicians and mechanics resolve customer issues by providing detailed specifications, functional descriptions, diagnostic codes, and service/repair instructions for components.
New holland lb110 b backhoe loader service repair manualujdfjjjdfkkskemm
This document is a workshop manual that provides technical information for servicing and repairing LB90.B-LB115.B loader backhoes. It contains sections on safety precautions, maintenance, specifications, the transmission, torque converters, and front axles. The manual consists of two volumes, one for the loader backhoe and one for the engine. It provides the necessary information for carrying out service and repair work, including tools needed and repair procedures.
New holland d180 c bulldozer (bd) blade, long track (lt) tier 2 crawler doz...ujdfjjjdfkkskemm
This document is a service manual for the D180C Crawler Dozer that contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and platform, cab, bodywork, and decals. It includes sections covering specific components and systems with subsection numbers for topics like the engine, fuel system, cooling system, and electrical faults.
New holland d180 c bulldozer (bd) blade, extra long track (xlt) tier 2 craw...ujdfjjjdfkkskemm
This document is a service manual for D180C crawler dozers that provides information on maintenance and repair of engine, hydrostatic drive, brakes, hydraulic systems, frames, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. It outlines safety procedures and contains sections covering specific components.
New holland d180 c bd crawler dozer service repair manualujdfjjjdfkkskemm
This document is a service manual for D180C crawler dozers. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, platform, cab, bodywork, and decals. Safety rules and instructions are provided at the beginning regarding personal safety, machine safety, and protecting the environment.
New holland d180 tier 3 crawler dozer service repair manualujdfjjjdfkkskemm
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d150 c power angle tilt (pat) blade, low ground pressure (lgp) ...ujdfjjjdfkkskemm
This document is a service manual for the D150C Crawler Dozer that provides information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. It contains safety warnings and introduces the manual's organization by component groups.
New holland w110 c tier 2 wheel loader service repair manualujdfjjjdfkkskemm
This document provides instructions for removing the engine from a Wheel Loader. Key steps include draining fluids, disconnecting batteries, removing the radiator, hood, air intake components, and wiring harnesses. Safety measures are outlined such as releasing hydraulic pressure before removal. Proper lifting and support of heavy components is emphasized.
New holland w70 c hs tier 4b (final) compact wheel loader service repair manualujdfjjjdfkkskemm
This document is a service manual for New Holland compact wheel loaders W50C, W60C, W70C, and W80C. It contains instructions for repair and maintenance work to be performed only by qualified dealership personnel. The manual provides information on the engine, transmission, front and rear axle systems, brakes and controls, hydraulic systems, frames and ballasting, steering, and electrical systems of the loaders. Proper procedures are outlined for tasks like shimming, installing rotating shaft seals, applying sealing compounds, and protecting electronic systems during charging and welding.
New holland w70 c hs tier 4 compact wheel loader service repair manualujdfjjjdfkkskemm
This document provides instructions for removing an engine from a compact wheel loader. It describes disconnecting wiring harnesses and hoses, draining fluids, securing the engine hood with a lifting strap, removing mounting bolts, and carefully raising and removing the engine hood to access the engine. Proper safety procedures and equipment are emphasized.
New holland w60 c tc stage iiib compact wheel loader service repair manualujdfjjjdfkkskemm
This document is a service manual for CNH Industrial Italia S.p.A. compact wheel loaders models W50C, W60C, W70C, and W80C. It contains sections on the engine, four-wheel drive system, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, steering, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. The manual provides repair and maintenance instructions for technicians and mechanics.
New holland w50 tc wheel loader service repair manualujdfjjjdfkkskemm
This document provides repair manuals and technical specifications for W50TC, W60TC, W70TC, and W80TC wheel loaders. It includes sections on the engine, front and rear axles, braking system, hydraulic system, and their various components. Diagrams, dimensions, troubleshooting guides, and disassembly/reassembly instructions are provided to assist with maintenance and repairs.
New holland td5.115 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, as well as sections covering the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and the platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and technicians working on these tractor models.
New holland td5.105 tractor service repair manualujdfjjjdfkkskemm
This document is a service manual for tractor models TD5.65, TD5.75, TD5.85, TD5.95, TD5.105, and TD5.115. It contains an introduction and safety rules section, followed by detailed sections on the engine, clutch, transmission, four-wheel drive system, front and rear axle systems, power take-off, brakes and controls, hydraulic systems, steering, wheels, cab climate control, electrical systems, and platform, cab, bodywork, and decals. The manual provides maintenance and repair instructions for authorized workshops and notes the importance of using only genuine spare parts.
New holland tc5070 combine harvesters service repair manualujdfjjjdfkkskemm
This document is a service manual for TC5060, TC5070, and TC5080 combine models. It contains sections covering the engine, transmission, front axle system, hydrostatic drive, brakes and controls, hydraulic systems, steering, cab climate control, electrical systems, attachments/headers, product feeding, threshing, separation, residue handling, cleaning, and crop storage/unloading. It provides technical specifications and instructions for servicing and repairing components in these various systems.
New holland tc5060 hillside combine harvesters service repair manualujdfjjjdfkkskemm
This service manual provides information on servicing TC5040, TC5050, TC5060, TC5070, TC5080, and TC5080 Hillside combines. The manual is divided into sections covering the combines' distribution systems, power train, travelling systems, body and structure, tool positioning, and crop processing systems. Each section contains technical data, functional descriptions, diagnostics, and service procedures for the machines' mechanical, electrical, hydraulic, and electronic components.
New holland tc5060 combine harvesters service repair manualujdfjjjdfkkskemm
This service manual provides information on servicing various components of TC5040, TC5050, TC5060, TC5070, TC5070, TC5080 Hillside, and TC5080 combines. The manual covers engines, transmissions, brakes, hydraulics, electrical systems, attachments, feeding, threshing, separation, cleaning, and other systems. Repair and maintenance must only be performed by trained technicians using the proper tools and procedures. Unauthorized repairs may void warranties.
New holland tc40 da tractor service repair manualujdfjjjdfkkskemm
This document is the contents page for a repair manual for New Holland TC35A, TC35DA, TC40A, TC40DA, TC45A, and TC45DA tractors. It lists the sections and chapters contained within the repair manual, including the engine, clutch, transmission, driveline, front and rear axles, brakes, hydraulic system, steering, climate control, electrical systems, and platform. The document provides an overview of the complete contents and organization of the repair manual.
New holland tc5.90 hillside fpt nef tier 4 b combine harvesters service repai...ujdfjjjdfkkskemm
This document is a service manual that provides maintenance and repair instructions for the TC5.80, TC5.90, and TC5.90 Hillside combine models. It contains over 190 sections organized by technical system, with each section dedicated to a specific component or function. The manual emphasizes that all repair work must only be performed by qualified dealership personnel using the proper tools and procedures.
New holland tc5.70 fpt nef 4 stage iv combine harvester service repair manualujdfjjjdfkkskemm
This document is a service manual for CNH Industrial combine harvesters including models TC4.90, TC5.70, TC5.80, TC5.90, and TC5.90 Hillside. The manual contains over 200 sections providing specifications, maintenance, and repair instructions for the combine's engine, transmission, axles, brakes, hydraulics, electrical systems, attachments, and all major operating systems. The sections are organized by functional area and component and include detailed diagrams, part numbers, and troubleshooting steps.
New holland t6090 range command tractor service repair manualujdfjjjdfkkskemm
This document is a service manual that provides technical information on the hydraulic, pneumatic, electrical, and electronic systems of various tractor models. It contains sections covering the primary and secondary hydraulic power systems, pneumatic system, electrical power system, electronic systems, engine and transmission systems, axles, brakes, steering, frame, cab, hitches, and working tools. The manual aims to help technicians and mechanics resolve customer issues by providing detailed specifications, functional descriptions, diagnostic codes, and service/repair instructions for components.
New holland lb110 b backhoe loader service repair manualujdfjjjdfkkskemm
This document is a workshop manual that provides technical information for servicing and repairing LB90.B-LB115.B loader backhoes. It contains sections on safety precautions, maintenance, specifications, the transmission, torque converters, and front axles. The manual consists of two volumes, one for the loader backhoe and one for the engine. It provides the necessary information for carrying out service and repair work, including tools needed and repair procedures.
New holland d180 c bulldozer (bd) blade, long track (lt) tier 2 crawler doz...ujdfjjjdfkkskemm
This document is a service manual for the D180C Crawler Dozer that contains information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, and platform, cab, bodywork, and decals. It includes sections covering specific components and systems with subsection numbers for topics like the engine, fuel system, cooling system, and electrical faults.
New holland d180 c bulldozer (bd) blade, extra long track (xlt) tier 2 craw...ujdfjjjdfkkskemm
This document is a service manual for D180C crawler dozers that provides information on maintenance and repair of engine, hydrostatic drive, brakes, hydraulic systems, frames, tracks, cab climate control, electrical systems, dozer blade, tools, platform, and decals. It outlines safety procedures and contains sections covering specific components.
New holland d180 c bd crawler dozer service repair manualujdfjjjdfkkskemm
This document is a service manual for D180C crawler dozers. It contains sections covering the engine, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, tracks and track suspension, cab climate control, electrical systems, dozer blade and arm, tools, platform, cab, bodywork, and decals. Safety rules and instructions are provided at the beginning regarding personal safety, machine safety, and protecting the environment.
New holland d180 tier 3 crawler dozer service repair manualujdfjjjdfkkskemm
This document provides safety instructions and technical specifications for operating a CRAWLER DOZER workshop manual. It outlines key safety warnings to avoid risks to personnel and emphasizes the importance of following maintenance and repair instructions. Technical data and dimensions are provided for D180 models, including engine information, fluid capacities, weights, and component specifications. The document stresses the need to strictly follow safety precautions to prevent accidents and ensure safe operation of the machinery.
New holland d150 c power angle tilt (pat) blade, low ground pressure (lgp) ...ujdfjjjdfkkskemm
This document is a service manual for the D150C Crawler Dozer that provides information on engine systems, hydrostatic drive, brakes and controls, hydraulic systems, tracks and suspension, cab climate control, electrical systems, dozer blade and arm, tools, and other components. It contains safety warnings and introduces the manual's organization by component groups.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04390499
Heating and Air Conditioning
SMCS - 7304; 7309; 7320
Removal Procedure
Personal injury can result from contact with refrigerant.
Contact with refrigerant can cause frost bite. Keep face and hands away
to help prevent injury.
Protective goggles must always be worn when refrigerant lines are
opened, even if the gauges indicate the system is empty of refrigerant.
Always use precaution when a fitting is removed. Slowly loosen the
fitting. If the system is still under pressure, release it slowly in a well
ventilated area.
Personal injury or death can result from inhaling refrigerant through a
lit cigarette.
Inhaling air conditioner refrigerant gas through a lit cigarette or other
smoking method or inhaling fumes released from a flame contacting air
conditioner refrigerant gas, can cause bodily harm or death.
Do not smoke when servicing air conditioners or wherever refrigerant
gas may be present.
Use a certified recovery and recycling cart to properly remove the
refrigerant from the air conditioning system.
1/10(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. 1. Refer to Service Manual, SENR5664, "Air Conditioning and Heating Systems with R-134a
Refrigerant" for the recovery and the charging procedure. Refer to Special Publication,
NENG2500, "Air Conditioning Tools" for the correct tools.
Illustration 1 g02561096
2. Disconnect hose assembly (3). Remove switch (2). Remove bolts (1).
Illustration 2 g02561097
3. Clamp hose, as shown to contain coolant. Remove hoses (4).
Illustration 3 g02561116
2/10(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. 1. Install air conditioner group (21) in the reverse order of removal.
Disassembly Procedure
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be cleaned thoroughly. This will help to prevent dirt from entering the internal
mechanism.
Illustration 13 g02566678
1. Disconnect harness assembly (1). Remove actuator motor (2).
Illustration 14 g02566681
6/10(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Illustration 25 g02566681
4. Slide in core (6). Install cover (3). Install actuators motors (4). Connect harness assemblies
(5).
Illustration 26 g02566678
5. Install actuator motor (2). Connect harness assembly (1).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Sep 18 23:24:18 UTC+0800 2019
10/10(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04384176
Refrigerant Receiver-Dryer
SMCS - 7322
Removal Procedure
Personal injury can result from contact with refrigerant.
Contact with refrigerant can cause frost bite. Keep face and hands away
to help prevent injury.
Protective goggles must always be worn when refrigerant lines are
opened, even if the gauges indicate the system is empty of refrigerant.
Always use precaution when a fitting is removed. Slowly loosen the
fitting. If the system is still under pressure, release it slowly in a well
ventilated area.
Personal injury or death can result from inhaling refrigerant through a
lit cigarette.
Inhaling air conditioner refrigerant gas through a lit cigarette or other
smoking method or inhaling fumes released from a flame contacting air
conditioner refrigerant gas, can cause bodily harm or death.
Do not smoke when servicing air conditioners or wherever refrigerant
gas may be present.
Use a certified recovery and recycling cart to properly remove the
refrigerant from the air conditioning system.
1/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. 1. Recover the air conditioner refrigerant from the air conditioner system. Refer to ,
SENR5664, "Air Conditioning and Heating Systems with R-134a Refrigerant" for the
correct procedure. Refer to Dealer Service Tool Catalog, NENG2500, "Air Conditioning
Tools" for the correct tools.
Illustration 1 g02551740
2. Open the left side access door.
Illustration 2 g02551741
3. Disconnect lines (2) from the refrigerant dryer (3).
Illustration 3 g02551744
2/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. 4. Remove clamps (4). Remove refrigerant dryer (3).
Installation Procedure
1. Install refrigerant dryer (3) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Sep 18 23:25:14 UTC+0800 2019
3/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04604894
Actuator Motor (Air Distributor)
SMCS - 7304-MQ; 7309-MQ; 7320-MQ
Removal Procedure
Start By:
a. Remove the storage box and covers.
Illustration 1 g02412816
1. Remove bolts (1) and (3). Remove cover (2).
1/2(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 2 g02412857
2. Remove cover (4).
Illustration 3 g02412877
3. Disconnect harness assembly (5). Remove screws (7). Remove actuator (6).
Installation Procedure
1. Install actuator (6) in the reverse order of removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Sep 18 23:26:10 UTC+0800 2019
2/2(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04484309
Control Module (Automatic Temperature Control Unit)
SMCS - 7304-TA; 7309-TA; 7320-TA
Removal Procedure
Illustration 1 g02235393
1. Remove cover (1) and screw. Remove cover (2).
1/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 2 g02237715
2. Remove screws (3) from control panel (4).
Illustration 3 g02238123
3. Disconnect harness assemblies (5), (6), (7), and (8).
Illustration 4 g02238193
4. Disconnect harness assemblies (9), (10), and (11).
Illustration 5 g02238234
2/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. 5. Disconnect antenna (12). Disconnect harness assemblies (13), (14), (15), and (16).
6. Remove control module (4).
Installation Procedure
1. Install control panel (4) in the reverse order of the removal.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Sep 18 23:27:06 UTC+0800 2019
3/3(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04610611
Track Carrier Roller
SMCS - 4154
Specifications
Illustration 1 g02593236
Table 1
Specification for 8E-5600 Track Carrier Roller
Item Qty Part Specification Description
1 1
8E-5608
Duo-
Cone
Seal Gp
The rubber toric seals and all the contacting surfaces must be clean and
dry at assembly. Before assembly, apply a thin film of 6V-4876
Lubricant to the contacting surfaces of the metal seal rings. The metal
seal rings must be assembled square. The rubber toric seals should not
bulge and the rubber toric seals should not twist.
A - -
1/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. End play:
Minimum is 0.20 mm (0.008 inch).
Maximum is 0.75 mm (0.030 inch).
2 1
6V-7661
O-Ring
Seal
Lubricate the bore of the O-ring seal lightly with the lubricant that is
being sealed.
B - -
Before assembly, length of the track roller shaft assembly that must be
free of paint is 55 ± 5 mm (2.2 ± 0.2 inch).
Removal Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 8T-5255 Hydraulic Jack 1
1. Start the engine. Park the machine on a hard, level surface. Shut off the engine.
Personal injury or death can result from grease and oil coming out of
the relief valve.
Grease and oil are under high pressure coming out of the relief valve
and can penetrate the body.
Do not watch the relief valve to see if grease is escaping. Watch the track
or track adjustment cylinder to see if the track is being loosened.
Make sure the vent holes are clean before the tension is released on the
track.
Illustration 2 g00489342
2/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. 2. Release the tension on the track.
3. Loosen relief valve (1) by one turn only. If the track does not loosen after opening the relief
valve, move the machine forward and backward until the tension is released.
Illustration 3 g00693935
4. Loosen bolt (2) that holds track carrier roller (3) to the mounting bracket on the undercarriage.
Illustration 4 g00489356
5. Position Tooling (A) and suitable cribbing under the track assembly, as shown.
6. Use Tooling (A) in order to lift the track assembly off the track carrier roller.
7. Remove track carrier roller (3). The weight of track carrier roller (3) is 17 kg (38 lb).
Reference: Refer to Undercarriage Reconditioning Bulletin, SEBF8568, "Hydraulic Excavator Roller
Disassemble and Assembly Procedures" for the Disassembly and Assembly procedures for the track
carrier roller.
Installation Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
3/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. A 8T-5255 Hydraulic Jack 1
1. Make sure that the shaft of the track carrier roller and the bore in the mounting bracket on the
undercarriage are clean and free of dirt.
Illustration 5 g00652868
(x) Mounting bracket
2. Place the track carrier roller in position in the mounting bracket. The weight of track carrier
roller is 17 kg (38 lb). Adjust the carrier roller until Distance (a), the distance between the
outside face of the mounting bracket and the carrier roller is 7.0 ± 0.5 mm (0.28 ± 0.02 inch).
Illustration 6 g00693935
3. After you adjust the position of track carrier roller (3) in the mounting bracket, tighten bolt (2).
4/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
24. Illustration 7 g00489356
4. Make sure that track carrier roller (3) rotates smoothly by manually turning the carrier roller.
5. Slowly lower the track assembly onto the carrier roller with Tooling (A).
6. Tighten the tension of the track. Refer to Operation and Maintenance Manual, "Track
Adjustment - Adjust" for the correct procedure.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Sep 18 23:28:01 UTC+0800 2019
5/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320E L EXCAVATOR KLT
Configuration: 320E & 320E L Excavators KLT00001-UP (MACHINE) POWERED BY C6.6 Engine
Disassembly and Assembly
320E and 323E Excavators Machine Systems
Media Number -KENR9842-01 Publication Date -01/03/2013 Date Updated -28/03/2013
i04610953
Track Roller
SMCS - 4180
Specifications
Illustration 1 g02724642
Table 1
1/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
27. Specification for 348-1868 Double Flange Track Roller
Item Qty Part Specification Description
1 - -
Before assembly, the surfaces must be clean and free from protective
coating.
2 2
7F-8268 O
-Ring Seal Lubricate the bore with the lubricant that is being sealed.
3 2
9W-2142
Duo-Cone
Seal Gp
The rubber toric seals and all the contacting surfaces must be clean
and dry at assembly. Before assembly, apply a thin film of 6V-4876
Lubricant to the contacting surfaces of the metal seal rings. The seal
rings must be assembled square. The rubber toric seal should not bulge
and the rubber toric seal should not twist.
4 2
8E-5599
Track
Roller
Bearing
Inside diameter after assembly is 60.130 ± 0.076 mm
(2.3673 ± 0.0030 inch).
5 1
7H-3171
Pipe Plug
Apply blue Loctite 242 to the threads.
A - -
End play for the track roller shaft:
Minimum is 0.25 mm (0.010 inch).
Maximum is 1.25 mm (0.049 inch).
Illustration 2 g02724638
Table 2
Specification for 206-1265 Track Roller Gp
Item Qty Part Specification Description
1 - -
Before assembly, the surfaces must be clean and free from protective
coating.
2/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
28. 2 2 7F-8268 O
-Ring Seal
Lubricate the bore with the lubricant that is being sealed.
3 2
206-9211
Duo-Cone
Seal Gp
The rubber toric seals and all the contacting surfaces must be clean
and dry at assembly. Before assembly, apply a thin film of 6V-4876
Lubricant to the contacting surfaces of the metal seal rings. The seal
rings must be assembled square. The rubber toric seal should not bulge
and the rubber toric seal should not twist.
4 2
8E-5599
Track
Roller
Bearing
Inside diameter after assembly is 60.130 ± 0.076 mm
(2.3673 ± 0.0030 inch).
5 1
9w-2146
Plug
Apply blue Loctite 242 to the threads.
Torque to 28 ± 5 N·m (248 ± 44 lb in).
A - -
End play for the track roller shaft:
Minimum is 0.25 mm (0.010 inch).
Maximum is 1.25 mm (0.049 inch).
Removal Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Tube 2
8S-7615 Pin 2
8S-7640 Stand 2
B 183-4797 Track Roller Lifting Fork 1
Note: There is a track guide on each side of the machine. The procedure that follows is for the
removal of the track roller with the track guide.
1. Start the engine. Park the machine on a hard, level surface. Stop the engine.
2. Release the tension on the track. Refer to Operation and Maintenance Manual, "Track
Adjustment - Adjust".
3/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
29. Illustration 3 g01211423
Note: Adjust the height of Tooling (A) in order to have sufficient clearance for the removal of
the track rollers when Tooling (A) is installed under the undercarriage (1) of the machine.
3. Lift the side of the machine. Install Tooling (A) under the undercarriage, as shown.
Illustration 4 g00664654
4. Loosen the bolts that hold track guide (2) to the undercarriage.
Note: Do not remove the bolts at this time.
Illustration 5 g00664663
4/5(W)w
2019/9/18https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...