This document provides the assembly procedure for a final drive on excavator models 320D2 and 320D2 L. The 38 step procedure installs bearings, seals, gears, carriers, covers and other components into the main housing and motor housing using various tools. Precise measurements and torque specifications are required to properly preload bearings and install components. Cleanliness is critical throughout the assembly process.
Caterpillar cat w345 b series ii material handler (prefix anj) service repair...fjjsieskekfmmse
This document provides instructions for servicing the swing drive of a W345B Series II Material Handler. It lists the required tools and lubricants needed and provides detailed step-by-step instructions for disassembling and reassembling the swing drive. The instructions include cleaning and inspecting parts, applying lubricants, installing bearings and seals, torquing bolts, and reinstalling the completed swing drive. Special care must be taken to clean parts thoroughly and apply lubricants correctly during the reassembly process.
Caterpillar cat 330 d l excavator (prefix t2y) service repair manual (t2y0000...fjjskdmnenemm
This document provides assembly instructions for a 330D L excavator final drive. It lists the required tools and parts, and provides step-by-step instructions to assemble the final drive housing, install bearings and seals, attach planetary gears and carriers, and secure the final drive cover. Precise measurements and torque specifications are included to ensure proper assembly and bearing preload. Cleanliness is emphasized throughout the process.
Caterpillar cat w345 b series ii material handler (prefix cdy) service repair...fjjsieskekfmmse
This document provides assembly instructions for the swing drive of a W345B Series II Material Handler excavator. It lists the required tools and lubricants and outlines a 36 step process for assembling the various components of the swing drive, including bearings, seals, gears, housings, and fasteners. Special attention is given to cleaning parts, applying lubricants, setting torque specifications, and heating components to aid in assembly.
Caterpillar cat m320 f wheeled excavator (prefix f2w) service repair manual (...fjskkmemem
The document provides instructions for disassembling and assembling the rear axle of a M320F Wheeled Excavator. It lists the required tools and gives step-by-step instructions for removing components such as the carrier housing, planetary gears, brake discs, and hub. Reassembly instructions are also provided, describing how to install components like the thrust washer, carrier gear, and retaining rings in the reverse order of removal. Clearances for brake components are checked during assembly.
Caterpillar cat 345 d l excavator (prefix jkn) service repair manual (jkn0000...hhfjksekmm
The document provides instructions for assembling a travel motor. It describes 33 steps to assemble parts like pistons, seals, plates, springs and valves. Measurements are checked with tools at several steps to ensure correct assembly. Cleaning parts and preventing contamination of hydraulic systems is emphasized.
Caterpillar cat m318 d wheeled excavator (prefix p8l) service repair manual (...fjjsjeusekkekm
The document provides instructions for disassembling and assembling the rear axle of a M318D wheeled excavator. It lists 23 steps for disassembly, which include removing the carrier housing, planetary gears, brake discs, and hub. It then lists 28 steps for reassembly, covering installing thrust washers, planetary gears, brake discs, ring gear housing, seals, and bolts. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque wrenches. Proper torque specifications and clearance measurements are also provided.
Caterpillar cat m318 d wheeled excavator (prefix d8w) service repair manual (...fujsjefjwerkskemm
This document provides instructions for disassembling and assembling the final drive carriers, hubs, and brakes of a M318D wheeled excavator. The disassembly procedure involves removing 23 separate parts including carrier housings, planetary gears, thrust washers, retaining rings, and brake discs. The assembly procedure instructs installing these 23 parts in reverse order and includes steps to measure clearances and end play to ensure proper assembly. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque multipliers.
This document provides instructions for repairing the transmission of a 329DL excavator. It involves removing and reinstalling various transmission components like bearings, seals, gears, and housing pieces. Cleanliness is emphasized throughout the process. Measurements are taken to determine the correct shim thickness. Various tools are used to install components properly.
Caterpillar cat w345 b series ii material handler (prefix anj) service repair...fjjsieskekfmmse
This document provides instructions for servicing the swing drive of a W345B Series II Material Handler. It lists the required tools and lubricants needed and provides detailed step-by-step instructions for disassembling and reassembling the swing drive. The instructions include cleaning and inspecting parts, applying lubricants, installing bearings and seals, torquing bolts, and reinstalling the completed swing drive. Special care must be taken to clean parts thoroughly and apply lubricants correctly during the reassembly process.
Caterpillar cat 330 d l excavator (prefix t2y) service repair manual (t2y0000...fjjskdmnenemm
This document provides assembly instructions for a 330D L excavator final drive. It lists the required tools and parts, and provides step-by-step instructions to assemble the final drive housing, install bearings and seals, attach planetary gears and carriers, and secure the final drive cover. Precise measurements and torque specifications are included to ensure proper assembly and bearing preload. Cleanliness is emphasized throughout the process.
Caterpillar cat w345 b series ii material handler (prefix cdy) service repair...fjjsieskekfmmse
This document provides assembly instructions for the swing drive of a W345B Series II Material Handler excavator. It lists the required tools and lubricants and outlines a 36 step process for assembling the various components of the swing drive, including bearings, seals, gears, housings, and fasteners. Special attention is given to cleaning parts, applying lubricants, setting torque specifications, and heating components to aid in assembly.
Caterpillar cat m320 f wheeled excavator (prefix f2w) service repair manual (...fjskkmemem
The document provides instructions for disassembling and assembling the rear axle of a M320F Wheeled Excavator. It lists the required tools and gives step-by-step instructions for removing components such as the carrier housing, planetary gears, brake discs, and hub. Reassembly instructions are also provided, describing how to install components like the thrust washer, carrier gear, and retaining rings in the reverse order of removal. Clearances for brake components are checked during assembly.
Caterpillar cat 345 d l excavator (prefix jkn) service repair manual (jkn0000...hhfjksekmm
The document provides instructions for assembling a travel motor. It describes 33 steps to assemble parts like pistons, seals, plates, springs and valves. Measurements are checked with tools at several steps to ensure correct assembly. Cleaning parts and preventing contamination of hydraulic systems is emphasized.
Caterpillar cat m318 d wheeled excavator (prefix p8l) service repair manual (...fjjsjeusekkekm
The document provides instructions for disassembling and assembling the rear axle of a M318D wheeled excavator. It lists 23 steps for disassembly, which include removing the carrier housing, planetary gears, brake discs, and hub. It then lists 28 steps for reassembly, covering installing thrust washers, planetary gears, brake discs, ring gear housing, seals, and bolts. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque wrenches. Proper torque specifications and clearance measurements are also provided.
Caterpillar cat m318 d wheeled excavator (prefix d8w) service repair manual (...fujsjefjwerkskemm
This document provides instructions for disassembling and assembling the final drive carriers, hubs, and brakes of a M318D wheeled excavator. The disassembly procedure involves removing 23 separate parts including carrier housings, planetary gears, thrust washers, retaining rings, and brake discs. The assembly procedure instructs installing these 23 parts in reverse order and includes steps to measure clearances and end play to ensure proper assembly. Tools required include retaining ring pliers, drivers, spanners, pry bars, pullers, and torque multipliers.
This document provides instructions for repairing the transmission of a 329DL excavator. It involves removing and reinstalling various transmission components like bearings, seals, gears, and housing pieces. Cleanliness is emphasized throughout the process. Measurements are taken to determine the correct shim thickness. Various tools are used to install components properly.
This document provides installation instructions for a final drive on an excavator. It lists the required tools and parts. The procedure involves positioning the final drive in the frame using lifting equipment, applying anti-seize compound to bolts, and torquing the bolts to specified values. The lifting equipment is then removed and the machine is lifted to remove installation stands.
This document provides instructions for repairing a 329DL excavator transmission. It outlines 33 steps for disassembling and reassembling the transmission components. Cleanliness is important during the process. Bearings must be properly seated and shims installed to set clearance. O-rings and seals should be replaced. The transmission includes planetary gear sets that are assembled into carrier assemblies.
This document provides instructions for repairing the transmission of a 329DL excavator. It involves removing and reinstalling various transmission components like bearings, seals, gears, and housing pieces. Cleanliness is emphasized throughout the process. Measurements are taken to determine the correct shim thickness. Various tools are used to install components properly.
This document provides installation instructions for a final drive on an excavator. It lists the required tools and parts. The procedure involves positioning the final drive in the frame using lifting equipment. Bolts are tightened to specified torques. The lifting equipment and stands are then removed. The travel motor and track assembly are installed once the final drive is in place. Cleanliness and applying anti-seize compound to bolts is emphasized.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, alignment of pins and seals, and installation of shims, gears, and other parts.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, alignment of pins and seals, and installation of shims and gears.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, installation of seals and gears, and attachment of housing and cover components.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekdmmeed
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, and cover. The instructions emphasize cleanliness and applying anti-seize compound to parts during assembly. Precise measurements and shimming are required to set bearing preload.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekkdmeik
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, covers, and bolts. The instructions emphasize cleanliness during repair and replacing all O-rings, gaskets, and seals. Precise measurements and shimming are required to properly set bearing preload.
Caterpillar cat w345 b series ii material handler (prefix anj) service repair...fioskdmmd
This document provides instructions for servicing the swing drive of a material handler. It lists the required tools and notes on cleanliness. The 40 step procedure describes how to disassemble, clean, replace seals and bearings, and reassemble the swing drive. Proper application of lubricants and locking compounds is emphasized throughout.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual Instant D...fijsekkdmdm2w
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual Instant D...fskekkdmdmdm3e
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual (NAC00001...f7usuejkdkddm3
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Toyota bt spe140 electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a forklift truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides procedures for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair and replacement instructions.
Toyota bt spe120 l electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides instructions for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair procedures.
Toyota bt spe120 electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides instructions for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair procedures.
Toyota bt reflex rre250 hecc high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
Toyota bt reflex rre250 hec high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
Toyota bt reflex rre250 he high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
This document provides a parts list for Massey Ferguson 8450/8460 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of parts like engines, starters, belts, fans, clutches, shields, brackets, bolts, nuts, and labels. The parts apply to various engine serial number ranges for the MF 8450 and 8460 models. Footnotes provide additional details on some parts.
This document provides a parts list for Massey Ferguson 8450/8460 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of parts like engines, starters, belts, fans, shields, nuts, bolts and other components. Part numbers, quantities, serial number ranges and other identifying information is provided for each part.
Massey ferguson mf8280 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for the engine of Massey Ferguson 8270/8280 tractors. It includes 25 items describing cylinder block parts, their part numbers, and quantities. It also includes information on the cylinder block equipment with 22 additional parts listed. Finally, it describes the timing gear housing with 11 parts. The document provides detailed technical specifications and part numbers for various engine components.
More Related Content
Similar to Caterpillar cat 320 d2 excavator (prefix sdz) service repair manual (sdz00001 and up)
This document provides installation instructions for a final drive on an excavator. It lists the required tools and parts. The procedure involves positioning the final drive in the frame using lifting equipment, applying anti-seize compound to bolts, and torquing the bolts to specified values. The lifting equipment is then removed and the machine is lifted to remove installation stands.
This document provides instructions for repairing a 329DL excavator transmission. It outlines 33 steps for disassembling and reassembling the transmission components. Cleanliness is important during the process. Bearings must be properly seated and shims installed to set clearance. O-rings and seals should be replaced. The transmission includes planetary gear sets that are assembled into carrier assemblies.
This document provides instructions for repairing the transmission of a 329DL excavator. It involves removing and reinstalling various transmission components like bearings, seals, gears, and housing pieces. Cleanliness is emphasized throughout the process. Measurements are taken to determine the correct shim thickness. Various tools are used to install components properly.
This document provides installation instructions for a final drive on an excavator. It lists the required tools and parts. The procedure involves positioning the final drive in the frame using lifting equipment. Bolts are tightened to specified torques. The lifting equipment and stands are then removed. The travel motor and track assembly are installed once the final drive is in place. Cleanliness and applying anti-seize compound to bolts is emphasized.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, alignment of pins and seals, and installation of shims, gears, and other parts.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, alignment of pins and seals, and installation of shims and gears.
This service repair manual provides instructions for disassembling and assembling the final drive on a 323F LN Excavator. The summary is:
1. The manual outlines the required tools and provides step-by-step instructions for removing the final drive, including draining oil and removing bolts, covers, and other components.
2. Reassembly instructions include applying anti-seize compound, installing components in reverse order of removal, and torquing bolts to specified values.
3. Proper assembly ensures correct bearing preload, installation of seals and gears, and attachment of housing and cover components.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekdmmeed
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, and cover. The instructions emphasize cleanliness and applying anti-seize compound to parts during assembly. Precise measurements and shimming are required to set bearing preload.
Caterpillar cat 325 d l excavator (prefix nac) service repair manual (nac0000...fjsekkdmeik
This document provides repair instructions for a 325D L excavator transmission. It outlines 33 steps to disassemble and reassemble the transmission components. Key parts include the main housing, motor housing, bearings, seals, gears, carriers, plugs, covers, and bolts. The instructions emphasize cleanliness during repair and replacing all O-rings, gaskets, and seals. Precise measurements and shimming are required to properly set bearing preload.
Caterpillar cat w345 b series ii material handler (prefix anj) service repair...fioskdmmd
This document provides instructions for servicing the swing drive of a material handler. It lists the required tools and notes on cleanliness. The 40 step procedure describes how to disassemble, clean, replace seals and bearings, and reassemble the swing drive. Proper application of lubricants and locking compounds is emphasized throughout.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual Instant D...fijsekkdmdm2w
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual Instant D...fskekkdmdmdm3e
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Caterpillar Cat 325D L Excavator (Prefix NAC) Service Repair Manual (NAC00001...f7usuejkdkddm3
This service repair manual provides instructions for repairing a 325D L excavator transmission. It details 33 steps for disassembling and assembling the transmission components. Cleanliness is important during repair. O-rings and seals should always be replaced. Various tools are used to install bearings, seals, gears, and other parts in the correct order. Proper torque specifications and safety precautions are noted throughout the process.
Similar to Caterpillar cat 320 d2 excavator (prefix sdz) service repair manual (sdz00001 and up) (13)
Toyota bt spe140 electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a forklift truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides procedures for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair and replacement instructions.
Toyota bt spe120 l electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides instructions for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair procedures.
Toyota bt spe120 electric stacker truck service repair manualfjjskkdmnsme
The document provides instructions for repairing and replacing various components on a truck chassis. It includes steps for replacing service covers, side covers, emblem covers, and other covers. It also provides instructions for checking and replacing components of the support arms and stabilizers, including the pressure rod, torsion tubes, and rollers on the torsion tubes. Diagrams are included to identify the relevant parts. The document is a repair manual containing detailed repair procedures.
Toyota bt reflex rre250 hecc high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
Toyota bt reflex rre250 hec high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
Toyota bt reflex rre250 he high performance reach truck service repair manualfjjskkdmnsme
The document is a repair manual that provides information on operating principles, safety, maintenance and troubleshooting for a series of forklift models. It includes sections on general introduction, safety rules, operating principle, installation, maintenance, troubleshooting, and technical specifications. The manual covers various systems of the forklifts such as chassis, motors, transmission, brakes, steering, electrical, hydraulics and optional equipment. It also contains wiring diagrams, hydraulic schematics and service data.
This document provides a parts list for Massey Ferguson 8450/8460 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of parts like engines, starters, belts, fans, clutches, shields, brackets, bolts, nuts, and labels. The parts apply to various engine serial number ranges for the MF 8450 and 8460 models. Footnotes provide additional details on some parts.
This document provides a parts list for Massey Ferguson 8450/8460 Tractors (Tier 3) engines and equipment. It includes 51 numbered items with descriptions of parts like engines, starters, belts, fans, shields, nuts, bolts and other components. Part numbers, quantities, serial number ranges and other identifying information is provided for each part.
Massey ferguson mf8280 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for the engine of Massey Ferguson 8270/8280 tractors. It includes 25 items describing cylinder block parts, their part numbers, and quantities. It also includes information on the cylinder block equipment with 22 additional parts listed. Finally, it describes the timing gear housing with 11 parts. The document provides detailed technical specifications and part numbers for various engine components.
Massey ferguson mf8270 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for the engine of Massey Ferguson 8270/8280 tractors. It includes 25 items describing cylinder block parts, their part numbers, and quantities. It also includes information on the cylinder block equipment with 22 additional parts listed. Finally, it describes the timing gear housing with 23 parts and specifications. Overall, the document is a parts catalog for the engine, listing over 100 individual part numbers and descriptions to repair or replace components.
Massey ferguson mf8240 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for a Massey Ferguson 8240 tractor engine. It includes detailed lists of parts with part numbers, descriptions, quantities and other identifying information. The parts are grouped into sections covering the cylinder block, timing gear housing, flywheel housing, crankshaft and other engine components. The document contains replacement part numbers where original parts are no longer available.
Massey ferguson mf8220 tractors parts catalogue manualfjjskkdmnsme
This document provides a list of parts and descriptions for the engine and components of Massey Ferguson 8210/8220 tractors. It includes 41 items describing the cylinder block, 25 items for the crankshaft, pistons, and connecting rods, 33 items for the cylinder head, 14 items for the rocker shaft, and 10 items for the lubricating oil filler and breather system. Each item includes the part number, quantity, description, and any relevant comments.
Massey ferguson mf8210 tractors parts catalogue manualfjjskkdmnsme
This document provides a list of parts and descriptions for the engine and components of Massey Ferguson 8210/8220 tractors. It includes 41 items describing the cylinder block, 25 items for the crankshaft, pistons, and connecting rods, 33 items for the cylinder head, 14 items for the rocker shaft, and 10 items for the lubricating oil filler and breather system. Each item includes the part number, quantity, description, and any relevant comments.
Massey ferguson mf8170 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for the engine, alternator, starter, engine block heater, cylinder block, cylinder block equipment, timing gear housing, flywheel housing, crankshaft, pistons and connecting rods of a Massey Ferguson 8170 tractor with serial number 1637359. It contains lists of each component part number, quantity, description, and additional comments or specifications.
Massey ferguson mf8160 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for a Massey Ferguson 8160 tractor engine. It includes 3 pages listing 24 items that make up the cylinder block assembly, along with part numbers and descriptions. A second page lists 17 items that make up the cylinder head cover. The third page lists 26 items that make up the lubricating oil sump assembly.
Massey ferguson mf8150 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for an MF 8150 tractor engine. It includes 40 items describing engine parts like the cylinder block, pistons, crankshaft, timing gear housing, flywheel housing and other components. Each item lists the part number, quantity, description and any additional comments. It appears to be a parts catalog section for the engine of this tractor model.
Massey ferguson mf8140 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for an MF 8140 tractor engine. It includes a list of 39 engine parts with part numbers and quantities. The list includes major engine components like the cylinder block, crankshaft, pistons, connecting rods, timing gear housing, and flywheel housing. Footnotes provide additional details on some parts.
Massey ferguson mf8110 tractor parts catalogue manualfjjskkdmnsme
This document provides parts information for the cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, and turbocharger of a Massey Ferguson 8110 tractor with a T6.60 engine and serial number 1637281. It includes item numbers, part numbers, quantities, descriptions, and comments for 42 total parts related to these engine components. Replacement and repair notes are included for some parts indicating whether old parts are interchangeable with new updated part numbers.
Massey ferguson mf7726 s tractor (dyna vt) (f026053 9999999) or (m7726efn9s10...fjjskkdmnsme
This document provides a table of contents and part listings for a Massey Ferguson 7726/7726S tractor. The table of contents lists 18 systems for the tractor, including the engine/fuel system, axles, steering, drivetrain, brakes, hydraulics, electrical, and others. Following this are pages with detailed parts lists and descriptions for components of the engine cylinder block, timing gears/housing, and other engine assemblies. Over 50 individual parts are detailed on these pages.
Kobelco sk027 hydraulic excavator service repair manual sn pw01700 and upfjjskkdmnsme
The document is a shop manual issued in April 1992 for the hydraulic excavators SK024, SK027, and SK032. It provides applicable part numbers and model information for repairs and maintenance. The manual was first edition printed in the United States and copyrighted by Kobelco Construction Machinery America, LLC.
This document announces the winners of the 2024 Youth Poster Contest organized by MATFORCE. It lists the grand prize and age category winners for grades K-6, 7-12, and individual age groups from 5 years old to 18 years old.
The cherry: beauty, softness, its heart-shaped plastic has inspired artists since Antiquity. Cherries and strawberries were considered the fruits of paradise and thus represented the souls of men.
Heart Touching Romantic Love Shayari In English with ImagesShort Good Quotes
Explore our beautiful collection of Romantic Love Shayari in English to express your love. These heartfelt shayaris are perfect for sharing with your loved one. Get the best words to show your love and care.
This tutorial offers a step-by-step guide on how to effectively use Pinterest. It covers the basics such as account creation and navigation, as well as advanced techniques including creating eye-catching pins and optimizing your profile. The tutorial also explores collaboration and networking on the platform. With visual illustrations and clear instructions, this tutorial will equip you with the skills to navigate Pinterest confidently and achieve your goals.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart
2. S/N - TMF1-UP
S/N - WDJ1-UP
S/N - XAN1-UP
S/N - XBB1-UP
S/N - XCC1-UP
S/N - YEA1-UP
S/N - ZBD1-UP
S/N - ZCS1-UP
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3938 Link Bracket 2
D 439-3940 Link Bracket 2
G 126-3994 Duo-Cone Seal Installer 1
H - Loctite C5-A Anti-Seize Lubricant
F - Loctite High Flex From-In-Place Gasket
Note: Cleanliness is an important factor. Before assembly, all parts should be cleaned in
cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry
parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If
any parts are worn or damaged, use new parts for replacement. All disassembly and all
assembly procedures must be performed on a clean work surface and in a clean hydraulic
area. Keep cleaned parts covered and protected at all times.
Note: O-rings, gaskets, and seals should always be replaced. A used O-ring may not have
the same sealing properties as a new O-ring. Use 1U-6396 O-Ring Assembly Compound
during the assembly procedure.
Note: Apply a light film of hydraulic oil to all components before assembly.
1. Install the final drive sprocket if the sprocket was removed from the main housing.
2. Refer to Disassembly and Assembly, "Final Drive Sprocket - Remove and Install".
2/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Illustration 1 g00708215
3. Apply Tooling (H) to the outer diameter of the bearings.
4. Install bearings (32) and (33) in main housing (18) with a suitable press.
5. Make sure that bearing (32) and bearing (33) contact the counter bore in the main housing.
6. Use the following procedure to preload the bearings and determine the correct thickness of
shims.
Illustration 2 g00713058
a. Fasten Tooling (D) and a suitable lifting device to main housing (18). Install the main
housing on the motor housing.
b. Put the main housing and the motor housing in a suitable press.
3/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 3 g00709278
(a) Bearing surface
(b) Housing surface
c. Use a suitable press and a spacer in order to apply a load of 4000 kg (8819 lb) on the
bearings. Rotate the housing in order to seat the bearings.
d. Reduce the load on the bearings to 1000 ± 100 kg (2205 ± 221 lb).
e. Use a depth micrometer in order to measure the step length between the bearing
surface and the housing surface. Take measurements at several different locations
around the housing. Compute the average of the measured dimensions and record the
number. Call this Dimension (Y).
Illustration 4 g00709276
f. Use a depth micrometer in order to measure the step length of gear (26). Take
measurements at several different locations around the gear. Compute the average of
the measured dimensions and record the number. Call this Dimension (X).
g. The thickness of the shims is equal to (X − Y) ± 0.05 mm (0.002 inch).
Note: Use no more than two shims. If two shims are required, install the thinner shim
next to the gear.
h. Remove the main housing from the motor housing.
4/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Illustration 5 g01021370
7. Use Tooling (G) in order to install Duo-Cone seal (31) in main housing (18). Refer to
Disassembly and Assembly, "Duo-Cone Conventional Seals - Install".
Note: The rubber seals and all surfaces that contact the seals must be clean and dry. After
installation of the seals, put clean SAE 30 oil on the contact surfaces of the metal seals.
Illustration 6 g01021371
8. Use Tooling (G) in order to install Duo-Cone seal (29) in motor housing (28).
Illustration 7 g00708214
5/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. 9. Apply Tooling (H) to the surfaces that contact pins (30).
10. Install alignment pins (30).
Note: Do not damage the Duo-Cone seals in the main housing or in the motor housing
during the assembly of the two components. After installation of the main housing on the
motor housing, there will be a small gap between the components. The gap is caused by the
Duo-Cone seals. This gap will be eliminated during installation of gear (26).
Illustration 8 g00713058
11. Fasten Tooling (D) and a suitable lifting device to main housing (18). Install the main
housing on the motor housing.
Illustration 9 g00708211
12. Install shims (27) that were determined in Step 6.g in the main housing.
Note: If two shims are required, install the thinner shim next to the gear.
6/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Illustration 10 g00708187
13. Install gear (26).
14. Install bolts (25) in gear (26). Install the bolts in an even pattern until the gear is seated
against the bearing. Tighten bolts (25) in a crisscross pattern.
Illustration 11 g00708186
15. Install O-ring seal (24) to main housing (18).
Illustration 12 g00708175
16. Assemble carrier assembly (15), as follows.
7/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Illustration 13 g00708220
a. Install bearings (22) in planetary gear (23).
b. Install thrust washers (21) and planetary gear (23) in the carrier assembly.
c. Use a deburring tool in order to remove the metal burr from the openings in the
carrier. Install planetary shaft (19) in the carrier assembly.
d. Drive spring pin (20) into planetary shaft (19) with a hammer and a punch.
Illustration 14 g00513451
e. Orient the split in spring pin (20) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 1.50 mm (0.059 inch) from
the outside diameter of the spring pin hole.
17. Repeat Steps 16.a through 16.e in order to install the remaining planetary gears in the carrier
assembly.
8/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 15 g00708172
18. Install a lifting sling through the middle of carrier assembly (15). Fasten a 12.7 mm
(0.50 inch) shackle to the suitable lifting device.
19. Install carrier assembly (15) on the final drive. The weight of carrier assembly (15) is
approximately 39 kg (85 lb).
20. Remove the shackle and the suitable lifting device.
Illustration 16 g00713148
21. Apply Tooling (F) to the mating surface of ring gear (17b).
22. Install ring gear (17a) on ring gear (17b).
9/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 17 g00708184
23. Fasten a suitable lifting device to ring gears (17), as shown. Install the ring gears to main
housing (18). The weight of ring gears (17) is approximately 45 kg (100 lb).
Illustration 18 g00708325
24. Install spacer (16) in the carrier assembly.
Illustration 19 g00708162
25. Install sun gear (14) in carrier assembly (15).
10/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Illustration 20 g01304883
Illustration 21 g00708218
26. Assemble carrier assembly (7), as follows.
a. Install bearing (12) in planetary gear (13).
b. Install thrust washers (11) and planetary gear (13) in the carrier assembly.
c. Install planetary shaft (9) in the carrier assembly.
d. Drive spring pin (10) into planetary shaft (9) with a hammer and a punch.
Illustration 22 g00513451
e. Orient the split in spring pin (10) vertically to the carrier. Align the split in the spring
pin to the top or to the bottom. Make a stake mark on each side of the spring pin hole
in the carrier. Each stake mark should be approximately 1.50 mm (0.059 inch) from
the outside diameter of the spring pin hole.
11/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. 27. Repeat Steps 26.a through 26.e in order to install the remaining planetary gears in the carrier
assembly.
Illustration 23 g00708092
28. Install carrier assembly (7) in the ring gear. The weight of carrier assembly (7) is
approximately 14 kg (30 lb).
29. Install sun gear (8) in carrier assembly (7).
30. Install spacer (6) in carrier assembly (7).
Illustration 24 g00708235
31. Install new O-ring seals (5) on plugs (4) that were in the cover.
12/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 25 g00708091
32. Install plugs (4) in cover (2). Tighten plugs (4) to a torque of 80 ± 10 N·m (59 ± 7 lb ft).
33. Install thrust plate (3) in cover (2).
34. Apply Tooling (F) to the mating surface of the ring gear.
Illustration 26 g00708090
35. Fasten Tooling (B) and a suitable lifting device to cover (2), as shown. The weight of cover
(2) is approximately 32 kg (70 lb). Install cover (2).
36. Remove Tooling (B) and install the setscrews in cover (2).
Illustration 27 g00708089
37. Install bolts (1) and the washers that hold the cover in position. Tighten bolts (1) in a
crisscross pattern.
38. Remove the final drive from Tooling (A). The combined weight of the final drive and final
drive sprocket is approximately 310 kg (683 lb).
End By:
a. Install the final drive.
13/14(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. S/N - TMF1-UP
S/N - WDJ1-UP
S/N - XAN1-UP
S/N - XBB1-UP
S/N - XCC1-UP
S/N - YEA1-UP
S/N - ZBD1-UP
S/N - ZCS1-UP
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
8S-7611 Handle As 2
8S-7615 Pin As 2
283-1495 Stand Assembly 2
B 439-3939 Link Bracket As 2
C - Loctite C5A Copper Anti-Seize -
Table 2
Torque Values of Bolts (3)
Bolt Size Torque
M16 90 ± 15 N·m (66 ± 11 lb ft) and turn an additional angle of 60 ± 5 degrees.
M20 150 ± 25 N·m (111 ± 18 lb ft) and turn an additional angle of 55 ± 5 degrees.
M24 250 ± 25 N·m (184 ± 18 lb ft) and turn an additional angle of 45 ± 5 degrees.
M30 500 ± 50 N·m (369 ± 37 lb ft) and turn an additional angle of 50 ± 5 degrees.
2/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Illustration 1 g00712767
1. Attach Tooling (B) and a suitable lifting device to final drive (1). The weight of final drive
(1) and the sprocket is approximately 312 kg (688 lb). Position the final drive in the frame.
Illustration 2 g00712737
Note: Make sure that bolt holes (2) for the travel motor are in the correct position.
Note: Make sure that bolts (3), the washers, the motor housing, and the frame are clean and
free of protective coating and oil.
2. Before assembly remove all compounds, oil, and dust from the female threads.
3. Apply Tooling (C) to the threads of bolt (3). Install bolts (3) and the washers in the final
drive. Tighten bolts (3) to a torque specified in Table 2.
4. Refer to Service Magazine, M0083843, "An Improved Bolt Tightening Procedure for the
Critical Joints Is Now Used on All Excavators" for more detail information.
5. Remove Tooling (B) and the suitable lifting device from the final drive.
3/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 3 g00489826
Typical Example
6. Lift the side of the machine to remove Tooling (A).
End By:
a. Install the travel motor.
b. Connect the track assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jan 13 00:49:26 UTC+0800 2020
4/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. S/N - TMF1-UP
S/N - WDJ1-UP
S/N - XAN1-UP
S/N - XBB1-UP
S/N - XCC1-UP
S/N - YEA1-UP
S/N - ZBD1-UP
S/N - ZCS1-UP
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-2674 Vacuum Cap 1
B 138-7573 Link Bracket 2
Start By:
a. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic
System Pressure - Release".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
2/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 1 g01209599
1. Remove the cap from the hydraulic tank. Install Tooling (A) onto the hydraulic tank. Attach
an air supply hose to Tooling (A). Apply 276 to 414 kPa (40 to 60 psi) of air. This
procedure will pull vacuum on the hydraulic system.
Illustration 2 g01216069
2. Disconnect hose assemblies (1), (2), and (3). Remove support (4).
Illustration 3 g01216082
3/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
20. 3. Attach Tooling (B) and a suitable lifting device to swivel (9). The weight of swivel (9) is
approximately 45 kg (95 lb). Remove bolts (6) and retainer (8). Remove clamp (7) and boot
(5).
Illustration 4 g01216099
4. Remove bolts (10) and covers (11).
Illustration 5 g01216098
5. Disconnect hose assemblies (15). Disconnect fitting (16). Disconnect hose assemblies (12).
Remove fittings (14). Remove bolts (13). Remove swivel (9).
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Jan 13 00:50:22 UTC+0800 2020
4/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. S/N - XBB1-UP
S/N - XCC1-UP
S/N - YEA1-UP
S/N - ZBD1-UP
S/N - ZCS1-UP
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
6V-3822 Bolt 2
6V-5839 Washer 2
1P-5546 Crossblock 1
5P-4168 Step Plate 1
5F-7366 Screw 1
B 1P-2420 Transmission Repair Stand 1
Start By:
a. Remove the swivel joint. Refer to Disassembly and Assembly, "Swivel - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the swivel joint prior to disassembly.
2/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 1 g00633843
Illustration 2 g00633841
2. Use a suitable lifting device to position the swivel joint onto Tooling (B). Fasten the swivel joint to
Tooling (B), as shown. The weight of the swivel joint is approximately 43 kg (95 lb).
3. Remove bolts (1), washers (2), and cover (3) from outside housing (8).
4. Remove O-ring seal (7) from outside housing (8).
5. Remove bolts (4), washers (5), and retainer (6) from rotor (11).
6. Use Tooling (A) in order to separate the outside housing (8) from rotor (11). The weight of outside
housing (8) is approximately 20 kg (45 lb). The weight of rotor (11) is approximately 21 kg (46 lb).
7. Remove seals (9) from outside housing (8).
3/4(W)w
2020/1/13https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...