The document provides service repair instructions for a 316E L excavator final drive and related components. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove the final drive, disassemble it into individual parts, and replace or install new parts during reassembly. Precautions are outlined such as applying anti-seize compound and thread lock to bolts during installation.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...kubei069369925
The document provides service repair instructions for a 316F L excavator final drive. It includes specifications, illustrations, and step-by-step procedures for removing, disassembling, and assembling the final drive. The removal procedure involves using lifting tools to detach the final drive from the frame. The disassembly procedure has 35 steps to fully take apart the internal components. Precautions are given to clean parts and apply sealants or lubricants during assembly. Required tools are listed for each procedure.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...rishang96299
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...shanruliu7360
The document provides specifications and procedures for disassembling and assembling the final drive of a 316F L excavator. It includes 27 detailed steps to disassemble the final drive into individual components like gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants. Required tools are specified. The document will guide maintenance technicians in repairing the final drive.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fuusejkddmmd3e
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator. It includes detailed part numbers, torque specifications, and 27 steps to fully disassemble the final drive. Tooling requirements are specified. Cautions are provided regarding cleanliness and applying specified lubricants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...jdksmmdmdd
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...dujkdksmdmdm
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...dkdmidkkdk
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator. It includes detailed part numbers, torque specifications, and 27 steps to fully disassemble the final drive. Tooling requirements are specified. Cautions are provided regarding cleanliness and marking parts for reinstallation.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fujkse9didkke3
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...kubei069369925
The document provides service repair instructions for a 316F L excavator final drive. It includes specifications, illustrations, and step-by-step procedures for removing, disassembling, and assembling the final drive. The removal procedure involves using lifting tools to detach the final drive from the frame. The disassembly procedure has 35 steps to fully take apart the internal components. Precautions are given to clean parts and apply sealants or lubricants during assembly. Required tools are listed for each procedure.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...rishang96299
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual Instant D...shanruliu7360
The document provides specifications and procedures for disassembling and assembling the final drive of a 316F L excavator. It includes 27 detailed steps to disassemble the final drive into individual components like gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants. Required tools are specified. The document will guide maintenance technicians in repairing the final drive.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fuusejkddmmd3e
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator. It includes detailed part numbers, torque specifications, and 27 steps to fully disassemble the final drive. Tooling requirements are specified. Cautions are provided regarding cleanliness and applying specified lubricants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...jdksmmdmdd
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...dujkdksmdmdm
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...dkdmidkkdk
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator. It includes detailed part numbers, torque specifications, and 27 steps to fully disassemble the final drive. Tooling requirements are specified. Cautions are provided regarding cleanliness and marking parts for reinstallation.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fujkse9didkke3
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fjkdksmmdm
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to disassemble parts such as gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying sealants or lubricants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...orrf0370383
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to disassemble parts such as gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying sealants or lubricants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...fjjsekkdmme
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...fjsekdmmeed
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including gears, shafts, bearings, seals and housings. Precautions are given to clean parts and apply lubricants. Special tools are listed to aid in lifting, removing, and installing components safely. Torque specifications and locktite applications are provided for reassembly.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including removing gears, shafts, bearings, seals and housings. It also provides specifications for 10 components with details on cleaning, lubrication and torque procedures. The assembly process is described as the reverse of the disassembly steps. Various tools are listed that are required for the disassembly and assembly procedures.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including removing gears, shafts, bearings, seals and housings. It also provides specifications for 10 components with details on fastener types, torques and lubricants to use during assembly. The assembly procedure lists 7 required tools and references the 27 disassembly steps but in reverse order.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the side of the machine, removing bolts, and using tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle components like gears, shafts, seals, and housings. Precautions are given to clean parts and mark alignments for reassembly.
Caterpillar cat 312 f excavator (prefix kmk) service repair manual (kmk00001 ...didkkskdmmd1
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the side of the machine, removing bolts, and using tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle components like gears, shafts, seals, and housings. Precautions are given to clean parts and mark alignments for reassembly.
The document provides specifications and repair procedures for a 312F excavator final drive. It includes specifications for parts, required tools, removal and disassembly steps, and assembly procedures. The removal procedure involves using lifting tools to detach the final drive from the excavator frame. The disassembly procedure details over 30 steps to fully take apart the final drive components. Precautions are provided regarding cleanliness and applying anti-seize compounds during assembly.
The document provides specifications and repair procedures for a 312F excavator final drive. It includes specifications for parts, required tools, removal and disassembly steps, and assembly procedures. The removal procedure involves using lifting tools to detach the final drive from the excavator frame. The disassembly procedure details over 30 steps to fully take apart the final drive components. Precautions are provided regarding cleanliness and applying anti-seize compounds during assembly.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the machine, removing bolts and washers, and using forcing tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle the various components of the final drive including gears, shafts, bearings, seals and housings. Cleanliness is emphasized throughout to prevent dirt intrusion.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the machine, removing bolts and washers, and using forcing bolts to withdraw the final drive. The disassembly procedure has 29 detailed steps to dismantle the various components of the final drive including gears, shafts, bearings, seals and housings. Cleanliness is emphasized throughout to prevent dirt intrusion.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including gears, shafts, bearings, seals and housings. Precautions are given to clean parts and apply lubricants. Special tools are listed to aid in lifting, removing, and installing components safely. Torque specifications and locktite applications are provided for reassembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...kubei069369925
This document provides disassembly and assembly instructions for the final drive on a 316F L excavator. It includes specifications, illustrations and step-by-step instructions to remove and disassemble the final drive assembly. Key components include the sprocket housing, ring gear, carrier assemblies, planetary gears and shafts. Precise alignment marks and specialized tools are required due to the assembly's size and weight, with components such as the sprocket housing weighing over 100 kg. Loctite, lubricants and anti-seize compounds must be applied correctly to prevent damage during reassembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...shanruliu7360
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...rishang96299
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...fuusejkddmmd3e
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator model. It includes 27 detailed steps to fully disassemble the final drive assembly. Specifications include torque values, sealant and lubricant requirements for various components. Tools required include stands, brackets, pins, bolts and ring pliers to carefully disassemble the multi-piece drive assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...dujkdksmdmdm
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator model. It includes detailed part numbers, specifications, torque values and 27 steps to fully disassemble the final drive. Illustrations accompany each step to show how to remove, disassemble and access the internal components, which include gears, shafts, bearings, seals and housing. Special tools are listed that are required to correctly support, position and remove parts safely.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...jdksmmdmdd
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
This document provides instructions for removing and installing various fuel system components on a 320C excavator with a 3066 engine. It describes removing the fuel filter base, fuel injection lines, fuel injection nozzles, fuel shutoff solenoid, and fuel injection pump. Detailed steps and illustrations are provided for each procedure, including required tools and safety precautions.
This document provides instructions for removing and installing the engine oil pump and water pump on a Caterpillar 320C excavator. The oil pump removal instructions involve removing bolts, gears, seals and other components. The installation involves cleaning parts, pressing components, heating items, and torquing bolts to the specified values. The water pump instructions similarly provide a process to remove the pump, pulley, seals and disassemble internal parts. Reassembly involves installing bearings, seals and torquing bolts. Precautions are given to contain fluids and ensure clean parts.
More Related Content
Similar to Caterpillar Cat 316E L Excavator (Prefix WZY) Service Repair Manual Instant Download.pdf
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...fjkdksmmdm
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to disassemble parts such as gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying sealants or lubricants during assembly.
Caterpillar Cat 316F L Excavator (Prefix ECZ) Service Repair Manual (ECZ00001...orrf0370383
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to disassemble parts such as gears, shafts, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying sealants or lubricants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...fjjsekkdmme
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar cat 316 f l excavator (prefix ecz) service repair manual (ecz0000...fjsekdmmeed
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including gears, shafts, bearings, seals and housings. Precautions are given to clean parts and apply lubricants. Special tools are listed to aid in lifting, removing, and installing components safely. Torque specifications and locktite applications are provided for reassembly.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including removing gears, shafts, bearings, seals and housings. It also provides specifications for 10 components with details on cleaning, lubrication and torque procedures. The assembly process is described as the reverse of the disassembly steps. Various tools are listed that are required for the disassembly and assembly procedures.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including removing gears, shafts, bearings, seals and housings. It also provides specifications for 10 components with details on fastener types, torques and lubricants to use during assembly. The assembly procedure lists 7 required tools and references the 27 disassembly steps but in reverse order.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the side of the machine, removing bolts, and using tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle components like gears, shafts, seals, and housings. Precautions are given to clean parts and mark alignments for reassembly.
Caterpillar cat 312 f excavator (prefix kmk) service repair manual (kmk00001 ...didkkskdmmd1
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the side of the machine, removing bolts, and using tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle components like gears, shafts, seals, and housings. Precautions are given to clean parts and mark alignments for reassembly.
The document provides specifications and repair procedures for a 312F excavator final drive. It includes specifications for parts, required tools, removal and disassembly steps, and assembly procedures. The removal procedure involves using lifting tools to detach the final drive from the excavator frame. The disassembly procedure details over 30 steps to fully take apart the final drive components. Precautions are provided regarding cleanliness and applying anti-seize compounds during assembly.
The document provides specifications and repair procedures for a 312F excavator final drive. It includes specifications for parts, required tools, removal and disassembly steps, and assembly procedures. The removal procedure involves using lifting tools to detach the final drive from the excavator frame. The disassembly procedure details over 30 steps to fully take apart the final drive components. Precautions are provided regarding cleanliness and applying anti-seize compounds during assembly.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the machine, removing bolts and washers, and using forcing tools to separate the final drive. The disassembly procedure has 29 detailed steps to dismantle the various components of the final drive including gears, shafts, bearings, seals and housings. Cleanliness is emphasized throughout to prevent dirt intrusion.
This document provides specifications and removal/disassembly instructions for the final drive on a 312F excavator model. It includes specifications for torque values, lubricants to apply, and required tooling. The removal procedure is a 6 step process that involves lifting the machine, removing bolts and washers, and using forcing bolts to withdraw the final drive. The disassembly procedure has 29 detailed steps to dismantle the various components of the final drive including gears, shafts, bearings, seals and housings. Cleanliness is emphasized throughout to prevent dirt intrusion.
The document provides specifications and instructions for disassembling and assembling the final drive of a 312F excavator. It includes 27 steps to disassemble the various components of the final drive, including gears, shafts, bearings, seals and housings. Precautions are given to clean parts and apply lubricants. Special tools are listed to aid in lifting, removing, and installing components safely. Torque specifications and locktite applications are provided for reassembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...kubei069369925
This document provides disassembly and assembly instructions for the final drive on a 316F L excavator. It includes specifications, illustrations and step-by-step instructions to remove and disassemble the final drive assembly. Key components include the sprocket housing, ring gear, carrier assemblies, planetary gears and shafts. Precise alignment marks and specialized tools are required due to the assembly's size and weight, with components such as the sprocket housing weighing over 100 kg. Loctite, lubricants and anti-seize compounds must be applied correctly to prevent damage during reassembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...shanruliu7360
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual Instant D...rishang96299
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...fuusejkddmmd3e
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator model. It includes 27 detailed steps to fully disassemble the final drive assembly. Specifications include torque values, sealant and lubricant requirements for various components. Tools required include stands, brackets, pins, bolts and ring pliers to carefully disassemble the multi-piece drive assembly.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...dujkdksmdmdm
This document provides specifications and disassembly/removal procedures for the final drive on a 316F L excavator model. It includes detailed part numbers, specifications, torque values and 27 steps to fully disassemble the final drive. Illustrations accompany each step to show how to remove, disassemble and access the internal components, which include gears, shafts, bearings, seals and housing. Special tools are listed that are required to correctly support, position and remove parts safely.
Caterpillar Cat 316F L Excavator (Prefix YDL) Service Repair Manual (YDL00001...jdksmmdmdd
This document provides service and repair instructions for the final drive and related components of a 316F L excavator. It includes specifications, illustrations, removal and disassembly procedures, and assembly instructions. The procedures involve using various tools to remove, disassemble, and replace components like gears, bearings, seals, and housings. Precautions are outlined for cleaning parts and applying lubricants and sealants during assembly.
Similar to Caterpillar Cat 316E L Excavator (Prefix WZY) Service Repair Manual Instant Download.pdf (20)
This document provides instructions for removing and installing various fuel system components on a 320C excavator with a 3066 engine. It describes removing the fuel filter base, fuel injection lines, fuel injection nozzles, fuel shutoff solenoid, and fuel injection pump. Detailed steps and illustrations are provided for each procedure, including required tools and safety precautions.
This document provides instructions for removing and installing the engine oil pump and water pump on a Caterpillar 320C excavator. The oil pump removal instructions involve removing bolts, gears, seals and other components. The installation involves cleaning parts, pressing components, heating items, and torquing bolts to the specified values. The water pump instructions similarly provide a process to remove the pump, pulley, seals and disassemble internal parts. Reassembly involves installing bearings, seals and torquing bolts. Precautions are given to contain fluids and ensure clean parts.
This document provides instructions for removing and installing track carrier rollers, track rollers, and separating the track on a 320C Excavator. It describes:
1) Releasing tension on the track and loosening a relief valve before removing components.
2) Using tools like a hydraulic jack and lifting forks to support the track assembly and remove rollers and bolts.
3) Cleaning surfaces, positioning components, and reinstalling bolts and rollers in the reverse order of removal.
Caterpillar Cat 320C and 320C L Excavator (Prefix MAB) Service Repair Manual ...tengtui535
This document provides instructions for disassembling a recoil spring assembly. It begins by removing the front idler and recoil spring assembly from the machine. A specialized recoil spring bench tool is then used to disassemble the recoil spring. The spring is under high tension and special precautions are required when handling it. The tool supports the spring and allows removing the retaining nut safely to separate the spring from other components.
Caterpillar Cat 320C and 320C L Excavator (Prefix ANB) Service Repair Manual ...tengtui535
The document provides instructions for removing and installing various components on a 320C excavator, including:
1. Actuator motors that control air dampers and airflow for temperature control, fresh air intake, rear window defroster, and more. The procedure involves disconnecting wiring harnesses, removing mounting screws, and removing the component.
2. A fan speed control unit for the blower. The procedure disconnects the wiring harness and removes two mounting screws to release the component.
3. An ambient air temperature sensor mounted on the excavator frame. The procedure disconnects the wiring harness, cuts a cable strap, and removes the sensor.
4. A coolant temperature sensor. The procedure
Caterpillar Cat 320C and 320C L Excavator (Prefix AMC) Service Repair Manual ...tengtui535
The document provides removal and installation instructions for various components of the climate control system in a Caterpillar 320C excavator, including actuator motors, a fan speed control, and a temperature sensor. The procedures describe disconnecting electrical connections and linkages, removing mounting hardware, and reversing the steps for installation. Components include actuator motors for air dampers controlling temperature, front and rear air flow, fresh/recirculated air, and front and rear windows.
This document provides instructions for assembling and disassembling parts of a 320 GC Excavator model BR4, including the travel motor and final drive. It lists the required tools and parts and includes illustrations of the assembly and disassembly procedures. The travel motor assembly instructions involve positioning the excavator, installing nuts and bolts, and attaching lifting eyes and plugs. The final drive disassembly instructions specify removing the final drive and separating the sprocket after removing the travel motor.
Caterpillar Cat 319D L Excavator (Prefix KRM) Service Repair Manual Instant D...tengtui535
This document provides instructions for disassembling and assembling the final drive of a 319D L excavator. The disassembly process involves removing over 30 individual parts from the final drive assembly including covers, gears, carriers, seals, and housings. The assembly process reverses the disassembly steps and provides details on installing new seals and determining the correct shim thickness. Proper cleaning, lubrication, and torque specifications are emphasized throughout.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix ZGZ) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling the final drive of a 319D L excavator. It lists the required tools and outlines 33 steps to disassemble the final drive components such as the cover, carrier assembly, ring gears, and housing. It then outlines 28 steps for reassembling the final drive, including pressing in bearings, installing seals, and determining the correct shim thickness. The overall procedure involves separating, cleaning, and reassembling over 15 individual parts and components of the final drive.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix ZCA) Service Repair Manu...tengtui535
This document provides assembly instructions for a final drive on an excavator model 319D L. It involves 38 steps including installing bearings, seals, gears, and other components into housings and covers. Precise measurements and torque specifications are required. Cleanliness is important to prevent contamination. The assembly is completed by installing the final drive assembly into the excavator frame using lifting equipment due to the 310 kg weight.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix WBJ) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling a final drive component of an excavator. It includes 33 steps for disassembly, removing components like the cover, carrier assembly, planetary gears, and seals. The assembly section has 13 steps, including pressing in bearings, installing seals and pins, and using shims to set proper bearing preload when installing the main housing onto the motor housing. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix RJP) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling a final drive on a 319D L and 319D LN excavator. The disassembly procedure involves removing 33 individual parts from the final drive including the cover, carrier assembly, ring gears, and main housing. The assembly procedure instructs installing these 33 parts in reverse order and includes steps for preloading the bearings and determining the correct shim thickness.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix KFM) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling the final drive of a 319D L and 319D LN excavator. It lists 33 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. It then lists 31 steps for assembly, installing components in reverse order and noting that cleanliness is important, O-rings and seals should be replaced, and bearings should be preloaded to determine the correct shim thickness.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix FMH) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling a travel motor. It is a 27 step process to disassemble the motor which includes removing components like the head, brake piston, barrel assembly, cam plate and shaft assembly. The 27 step assembly process describes cleaning and lubricating parts, and installing components in reverse order of removal while ensuring proper alignment of markings and components. Special care must be taken to avoid damaging parts and ensure correct assembly of components like the cam plate and keys.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix EAW) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling a final drive component. It lists 33 steps for disassembly, removing parts like the cover, carrier assembly, planetary gears, and seals. The 21 steps for assembly install these parts in reverse order, including pressing in bearings, installing seals with special tools, and using shims to set proper bearing preload when joining the main housing to the motor housing. Proper cleaning and lubrication of parts is emphasized throughout.
Caterpillar Cat 319D L and 319D LN Excavator (Prefix AYF) Service Repair Manu...tengtui535
The document provides instructions for disassembling and assembling the final drive of a 319D L excavator. It lists 30 steps for disassembly, removing components like the cover, carrier assembly, ring gears, and seals. It then lists 33 steps for assembly, installing components in reverse order and noting that all parts must be cleaned, O-rings and seals replaced, and surfaces lubricated before assembly. Precise measurements and shim selection are required to set the bearing preload correctly.
This document provides instructions to disassemble and assemble the final drive of a 319D excavator. It describes in detail how to remove over 30 individual components of the final drive including the cover, carrier assembly, ring gears, and housing. Cleanliness is emphasized throughout. The assembly section matches the disassembly steps and includes precautions like replacing seals and applying anti-seize lubricant to bearings. Proper bearing preload is determined using measurements and shims.
Caterpillar Cat 318F L Excavator (Prefix HCP) Service Repair Manual Instant D...tengtui535
This document provides instructions for disassembling and assembling the travel motor of a 318F L Excavator. It lists the required tools and presents 31 steps for disassembly, including removing components like the springs, spools, caps, and head assembly. It then lists 29 steps for reassembly, instructing technicians to install components in the reverse order of removal. Safety warnings are provided throughout to remind technicians to wear protective equipment when working with pressurized air or spring-loaded parts.
Caterpillar Cat 318F L Excavator (Prefix FFT) Service Repair Manual Instant D...tengtui535
This document provides disassembly instructions for the final drive of a 318F L excavator. It describes 41 steps to fully disassemble the final drive components. Key steps include removing the sprocket, pistons, barrel assembly, planetary gears, sun gears, and housings. Safety warnings are provided to release pressures and springs carefully due to risk of injury from propelled parts.
Caterpillar Cat 318E L Excavator (Prefix WZS) Service Repair Manual Instant D...tengtui535
This document provides instructions for disassembling and assembling the final drive of a 318E L excavator. It describes in detail how to remove over 30 individual components of the final drive including gears, shafts, seals, housings and other parts. Precise steps are outlined for disassembly, and specifications and procedures are provided for reassembling each component in the proper order and with the correct tools, fasteners, seals and other materials. Torque specifications and application of sealants are noted throughout.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Dahua provides a comprehensive guide on how to install their security camera systems. Learn about the different types of cameras and system components, as well as the installation process.
Charging Fueling & Infrastructure (CFI) Program Resources by Cat PleinForth
Cat Plein, Development & Communications Director of Forth, gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Charging Fueling & Infrastructure (CFI) Program by Kevin MillerForth
Kevin Miller, Senior Advisor, Business Models of the Joint Office of Energy and Transportation gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
Charging and Fueling Infrastructure Grant: Round 2 by Brandt HertensteinForth
Brandt Hertenstein, Program Manager of the Electrification Coalition gave this presentation at the Forth and Electrification Coalition CFI Grant Program - Overview and Technical Assistance webinar on June 12, 2024.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 316E L EXCAVATOR WZY
Configuration: 316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
316E Excavator Machine Systems
Media Number -KENR9854-04 Publication Date -01/01/2017 Date Updated -12/01/2017
i07186488
Final Drive
SMCS - 4050
Specifications
Note: Callouts in the Specifications section do not match the callouts in the Remove and Install
sections.
1/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g02737737
Top view
Table 1
Specification for 333-3002 Final Drive and Mounting Gp
Item Qty Part Specification Description
1 - -
Before assembly, the surfaces must be clean and free of any protective
coating.
2 40
461-3873
Bolt
Apply Loctite C5A Copper Anti-Seize to threads. Torque to
90 ± 15 N·m (66 ± 11 lb ft). Turn an additional angle of 60 ± 5 degrees.
Illustration 2 g02737820
2/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Table 2
Specification for 350-0452 Final Drive Gp
Item Qty Part Specification Description
1 16
8T-7929
Bolt
Apply red Loctite 271 to the threads.
Torque to 105 ± 20 N·m (929 ± 177 lb in).
2 4
114-1539
Dowel Pin
Apply Loctite C5A Copper Anti-Seize to the inside diameter and
outside diameter of the mating parts.
3 2
296-6220
Ball Bearing
Apply Loctite C5A Copper Anti-Seize to the inside diameter and
outside diameter of the mating parts.
4 1
174-4874
Duo-Cone
Seal Gp
Rubber toric seals and all surfaces that in contact with the seals
must be clean and dry at assembly. Prior to assembly apply, a thin
layer of 6V-4876 Lubricant to the surfaces that are in contact with
the metal seals. The metal seal must be assembled square with the
bore. The rubber toric seals must not bulge. The rubber toric seals
must not be twisted.
5 6
095-0891
Spring Pin
After installation of the spring pins (5), create two stake marks for
each pin slightly near the hole of spring pins. Refer to Illustration 2
for the locations of the stake marks.
6 2
3E-2338 Pipe
Plug
Torque to 80 ± 10 N·m (59 ± 7 lb ft).
7 1
165-5790
Cover
Before assembly, apply 8C-8422 Sealant to the mating surfaces of
the cover.
8 1
165-3892
Ring Gear
Before assembly, apply 8C-8422 Sealant to the mating surfaces of
the ring gear.
9 16
227-6034
Bolt
Torque to 270 ± 40 N·m (199 ± 30 lb ft).
10 As required, use the following shims to achieve the correct clearance between the ball
bearing and the coupling gear. If two shims (10) are required, install the thinnest shim next
to the coupling gear:
1
096-1773
Shim
Thickness is 0.15 mm (0.006 inch).
1
096-1774
Shim
Thickness is 0.30 mm (0.012 inch).
1
096-1775
Shim
Thickness is 0.40 mm (0.016 inch).
1
096-1776
Shim
Thickness is 0.50 mm (0.020 inch).
1
096-1777
Shim
Thickness is 0.60 mm (0.024 inch).
1
096-1778
Shim
Thickness is 0.70 mm (0.028 inch).
3/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. 1 096-1779
Shim
Thickness is 0.80 mm (0.031 inch).
1
096-1780
Shim
Thickness is 1.00 mm (0.039 inch).
1
096-1781
Shim
Thickness is 1.60 mm (0.063 inch).
D - -
The distance from the edge of the spring pin hole to the stake mark
is 1.5 mm (0.06 inch).
11 1
354-4318
Nameplate
Apply Loctite 330 or activator 738 to the surface of the nameplate.
Removal Procedure
Table 3
Required Tools
Tool Part Number Part Description Qty
A
8S-7640 Stand 2
8S-7611 Tube 2
8S-7615 Pin 2
B 439-3939 Link Bracket As 2
C 154-6184 Forcing Bolt (M 20) 2
Start By:
a. Separate the track assembly. Refer to Disassembly and Assembly, "Track - Separate".
b. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
Illustration 3 g00489826
Note: Adjust the height of Tooling (A) so that there is sufficient clearance between the
sprocket and the track for the removal of the final drive.
4/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. 1. Lift the side of the machine to install Tooling (A) under the frame, as shown.
Illustration 4 g00712767
2. Fasten Tooling (B) and a suitable lifting device to final drive (1), as shown. Put a slight lifting
tension on the final drive.
Illustration 5 g00712737
Note: Mark the orientation of bolt holes (2) for the travel motor for installation purposes.
3. Remove bolts (3) and the washers from the final drive.
Illustration 6 g00712749
4. Use Tooling (C) to remove the final drive from the frame.
5/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 5. Carefully remove final drive (1). The weight of final drive (1) and the sprocket is
approximately 312 kg (688 lb).
6. Remove Tooling (C) from the frame.
Disassembly Procedure
Table 4
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 439-3938 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 439-3940 Bracket As 3
E 4C-8359 Eyebolt 2
F 439-3939 Link Bracket As 2
G 439-3941 Link Bracket As 2
Start By:
a. Remove the final drive.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will prevent dirt from entering the internal
mechanism.
1. Put an alignment mark across the sections of the final drive for assembly purposes. The parts
must be reinstalled to the original locations.
Illustration 7 g00892878
2. Use Tooling (G) and a suitable lifting device to position the final drive assembly onto Tooling
(A). The weight of the final drive assembly is approximately 550 kg (1200 lb).
3. Remove bolts (1).
6/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g00892883
4. Use Tooling (B) and a suitable lifting device to remove cover (2). The weight of cover (2) is
approximately 32 kg (70 lb).
Illustration 9 g00892888
5. Remove bolts (3) and gear (4). Check plate (6). Replace plate (6) if plate (6) is worn. Remove
plugs (5) from cover (2).
Illustration 10 g00892906
6. Remove O-ring seals (7) from plugs (5).
7/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 11 g00892930
7. Remove gear (8) and spacer (9).
Illustration 12 g00892965
8. Use Tooling (C) to remove retaining ring (10). Remove washer (11) and gear (12). Remove
bearing assembly (13) and washer (14).
9. Repeat Step 8 for the other two gear assemblies.
Illustration 13 g00892968
10. Remove retaining ring (15).
8/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 14 g00892975
11. Remove carrier assembly (16).
Illustration 15 g02408860
12. Use a suitable press to remove the shafts from carrier assembly (16).
Illustration 16 g00892977
13. Remove gear (17) and spacer (18).
9/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEBP5...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 17 g00892997
14. Use Tooling (D) and a suitable lifting device to remove planetary carrier (19). The weight of
planetary carrier (19) is approximately 48 kg (105 lb).
Illustration 18 g00893019
15. Remove retaining ring (21). Lift planetary carrier (19) off sun gear (20).
Illustration 19 g00896860
16. Drive spring pin (23) into planetary shaft (22).
10/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 20 g00893043
17. Remove planetary shaft (22). Use a suitable punch to remove spring pin (23) from planetary
shaft (22).
Illustration 21 g00896863
18. Remove washers (24) and bearing (25) from planetary gear (26).
19. Repeat Steps 16 through 18 for the other two planetary gears.
Illustration 22 g01842853
20. Remove gear (27). Remove spacer (27A).
11/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 23 g01842974
21. Use two people to remove carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
Illustration 24 g01843140
22. Drive spring pin (30) into shaft (29).
Illustration 25 g00893658
23. Remove shaft (29). Use a suitable punch to remove spring pin (30) from shaft (29).
12/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 26 g00893674
24. Remove washers (31) and bearings (32) from planetary gear (33).
25. Repeat Steps 22 through 24 for the other three planetary gears.
Illustration 27 g01208300
26. Fasten Tooling (E) and a suitable lifting device to ring gear (34), as shown. Remove ring gear
(34) from sprocket housing (35). The weight of ring gear (34) is approximately 66 kg (146 lb).
Illustration 28 g01208542
27. Remove O-ring seal (36) from sprocket housing (35).
13/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 29 g01208553
28. Remove bolts (37) from coupling gear (38).
Illustration 30 g01208572
29. Install suitable forcing bolts (39) in coupling gear (38). Tighten the forcing bolts evenly to
loosen coupling gear (38). Remove the coupling gear from the motor housing.
Illustration 31 g01208578
14/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 32 g01208625
30. Remove shims (40) from the motor housing.
Note: Inner cones and outer bearing cones (42) are a slip fit on the motor housing. While you
remove sprocket housing (35) from the motor housing, inner bearing cone (42) may stay with
the sprocket housing or the inner bearing cone may stay on the motor housing.
31. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Separate the sprocket
housing from the motor housing. The weight of sprocket housing (35) is approximately 109 kg
(240 lb).
Illustration 33 g01208626
32. Remove the locating pins from the motor housing.
33. Remove Duo-Cone seal (41) from the motor housing.
34. If inner bearing cone (42) remained on the motor housing, then remove the inner bearing cone.
15/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 34 g01208633
35. Remove Duo-Cone seal (43) from the sprocket housing.
36. If inner bearing cone (42) remained on the sprocket housing, then remove the inner bearing
cone.
37. Remove the bearing cups from the sprocket housing.
Assembly Procedure
Table 5
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Stand Group 1
B 439-3938 Link Bracket 2
C 1P-1863 Retaining Ring Pliers 1
D 439-3940 Bracket As 3
E 4C-8359 Eyebolt 2
F 439-3939 Link Bracket As 2
G
8T-9206 Duo-Cone Seal Installer As 1
169-0503 Installation Kit 1
H 4C-5599 Anti-Seize Compound -
J 9S-3263 Thread Lock Compound -
K 8C-8422 Sealant -
L FT-2770 Leak down Test Tool 1
M 439-3941 Link Bracket As 2
1. Make sure that all parts of the final drive are thoroughly clean and free of dirt and debris prior
to assembly. Check the condition of all O-ring seals that are used in the final drive. If any of
16/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. the seals are damaged, use new parts for replacement. Reassemble the final drive on Tooling
(A).
Illustration 35 g01208879
2. Apply Tooling (H) to the surfaces inside sprocket housing (35) which comes in contact with
the bearing cups. Install a bearing cup that is in each side of the sprocket housing with a press.
Make sure that the bearing cups are properly seated.
3. Apply Tooling (H) to the surfaces inside the motor housing that comes in contact with bearing
cones (42).
4. Install inner bearing cone (42) on the motor housing.
Illustration 36 g01208625
5. Attach Tooling (F) and a suitable lifting device to sprocket housing (35). The weight of
sprocket housing (35) is approximately 109 kg (240 lb). Install sprocket housing (35) on the
motor housing. Carefully install outer bearing cone (42) on the sprocket housing.
17/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 37 g01208578
6. Adjust the bearing preload of the final drive. Determine the correct number of shims (40) that
are required for the proper bearing preload, as follows:
Illustration 38 g01208987
a. Use a depth micrometer to measure the step height of coupling gear (38) at several
locations around the gear. Find the average for the measured dimensions around the gear
and record the dimension. Call this Dimension (X).
b. Apply a load of 4000 kg (8820 lb) to bearing cones (42).
c. Rotate sprocket housing (35) several times to seat the bearing cones.
d. Reduce the load to 3000 ± 300 kg (6615 ± 660 lb).
18/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 39 g00631001
e. While the load is still on the bearing cones, measure the distance between the top face of
the motor housing and the top face of bearing cone (42). Take measurements in several
locations around the motor housing. Find the average of the measured dimensions, and
record the dimensions. Call this Dimension (Y).
f. Determine the correct thickness of shims (40) which are used between bearing cone (42)
and coupling gear (38). Use the following equation to determine the shim pack thickness.
Shim pack thickness ... (Y) − (X) ± 0.05 mm (0.002 inch)
Note: If two shims (40) are required, install the thinnest shim next to coupling gear (38)
during final assembly.
Illustration 40 g01208625
7. Attach Tooling (F) and a suitable lifting device to sprocket housing (35). Separate sprocket
housing (35) from the motor housing.
Reference: Refer to Disassembly and Assembly, "Duo-Cone Conventional Seals - Install".
Note: The rubber seals and all surfaces that comes in contact with the seals must be clean and
dry. After installation of the seals, put clean SAE 30 oil on the contact surfaces of the metal
seals.
Illustration 41 g00631006
19/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 42 g01208999
8. Use Tooling (G) to install Duo-Cone seal (43) in the sprocket housing.
Illustration 43 g00631014
Illustration 44 g01208626
9. Use Tooling (G) to install Duo-Cone seal (41) in the motor housing.
10. Apply Tooling (H) in the bores for the locating pins that are in the motor housing. Reinstall the
locating pins in the motor housing.
20/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 45 g01208625
11. Make sure that inner bearing cone (42) is seated properly on the motor housing.
Note: Do not scratch Duo-Cone seal (41) or damage the Duo-Cone seal in the main housing, or
the motor housing during assembly of the two components. After installation of the main
housing on the motor housing, there will be a small gap between the components. The gap
between the components is caused by the Duo-Cone seal. The gap will be eliminated during the
installation of coupling gear (40).
12. Fasten Tooling (F) and a suitable lifting device to sprocket housing (35). Carefully install the
sprocket housing on the motor housing.
13. Install outer bearing cone (42) on the sprocket housing. Make sure that the outer bearing cone
is properly seated.
Illustration 46 g01208578
14. Install shims (40) that were determined in Steps 6.a through 6.f on the end of the sprocket
housing. If shims were required, make sure that the thinnest shim is installed on top.
21/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 47 g01208553
15. Put coupling gear (38) in the original position on the motor housing.
16. Apply Tooling (J) on the threads of bolts (37) that hold coupling gear (38) in position. Tighten
bolts (37) evenly and tighten the bolts in diagonally opposite pairs.
Illustration 48 g01208542
17. Install O-ring seal (36) in sprocket housing (35).
Illustration 49 g01208300
18. Thoroughly clean the mating surface of sprocket housing (35) and the mating surface of ring
gear (34).
22/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
25. 19. Apply a bead of Tooling (K) on the mating surface of ring gear (34).
20. Attach Tooling (E) and a suitable lifting device to ring gear (34). Put ring gear (34) in position
on the sprocket housing. The weight of ring gear (34) is approximately 66 kg (146 lb). Make
sure that the alignment mark on the sprocket housing and the ring gear line up with each other.
Illustration 50 g01843479
Illustration 51 g00893674
21. Assemble carrier assembly (28), as follows.
a. Install bearings (32) in planetary gear (33).
b. Install thrust washers (31) and planetary gear (33) in the carrier assembly.
c. Use a deburring tool to remove the metal burr from the openings in the carrier. Install
planetary shaft (29) in the carrier assembly.
d. Drive spring pin (30) into planetary shaft (29).
23/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 52 g00941047
The stake mark is at position (S).
e. Orient the split in spring pin (30) vertically to the carrier. Align the split in the spring pin
to the top or to the bottom. Make a stake mark on each side of the spring pin hole in the
carrier. Each stake mark should be approximately 1.5 mm (0.06 inch) from the outside
diameter of the spring pin hole.
22. Repeat Steps 21.a through 21.e to install the other two planetary gears in the carrier assembly.
Illustration 53 g01842974
23. Use two people to install carrier assembly (28). The weight of carrier assembly (28) is
approximately 38 kg (85 lb).
24/34
316E L Excavator WZY00001-UP (MACHINE) POWERED BY C4.4 Engine(SEB...
2020/10/26
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...