This document provides specifications, removal, disassembly, and assembly instructions for a 313F L excavator travel motor. It details 28 steps to disassemble the travel motor, removing components like the head, brake piston, rotating assembly, and seals. Reassembly is the reverse of the disassembly process. Specifications are provided for components and fasteners, with torque and lubrication instructions given where needed.
Caterpillar cat 313 f l excavator (prefix dje) service repair manual (dje0000...fjkskefksmeme
This document provides specifications and repair instructions for a 313F L excavator travel motor. It includes removal and disassembly procedures, specifications for individual parts, and assembly instructions. Key steps include draining oil, removing hoses and bolts to detach the motor, and using various tools to disassemble internal components like pistons, seals, and bearings. Reassembly follows the reverse of disassembly.
Caterpillar cat 316 e l excavator (prefix yzz) service repair manual (yzz0000...fjskekdmjekm
This document provides specifications and repair instructions for the travel motor in a 316E L excavator. It includes specifications for the travel motor guard group, travel motor and mounting group, and travel motor group. The repair instructions describe how to remove and disassemble the travel motor, including draining oil, removing hoses, bolts, seals, plates, discs, shafts and other components. Detailed illustrations accompany each step.
Caterpillar cat d6 r track type tractor (prefix 6hr) service repair manual (6...fjkskedmme
1) The document provides instructions for removing and installing front track roller frames and recoil springs on a D6R track-type tractor.
2) It describes using various tooling to gradually compress the recoil springs and remove the retainer in increments to avoid injury.
3) Fifteen steps are outlined for installing the front track roller frame back onto the rear frame.
Caterpillar cat d6 r track type tractor (prefix 6fr) service repair manual (6...fjkskedmme
The document provides instructions for removing and installing idler rollers and equalizer bars on a Caterpillar D6R track-type tractor. Key steps include using hoists and tools to remove idlers and bolts/retainers, cleaning and inspecting parts, lubricating seals with isopropyl alcohol, and testing assemblies for leaks before reinstallation. Special tools are required to correctly set seal depths and check end play clearance during assembly.
Caterpillar cat 336 d l excavator (prefix myg) service repair manual (myg0000...fjskekdmjekm
This document provides instructions for disassembling and assembling the swing motor of 336D L and 336D LN excavators. The disassembly procedure involves 26 steps to remove components like the head, pistons, barrel, housing, seals and bearings. The assembly procedure reverses the disassembly steps and includes cleaning and inspecting parts, applying oil, and torquing bolts to the specified value. Proper tools and safety precautions are noted throughout.
This document provides instructions for removing and installing a cylinder head on a C18 industrial engine. It includes:
1) Detailed steps for removing the cylinder head such as disconnecting hoses, sensors, and removing bolts.
2) Instructions for installing seals, gaskets and the cylinder head, applying anti-seize compound to bolts, and tightening the bolts in a specific sequence.
3) Notes about cleaning parts and using new gaskets when installing the cylinder head.
Caterpillar cat 336 f lxe excavator (prefix naj) service repair manual (naj00...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F XE or 336F LXE excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Precautions are provided to safely release spring forces and properly mark parts for reassembly. Tools required include various bolts, pins, adapters, and pullers to dismantle the motor.
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts from an excavator engine.
2. It describes the required tools and gives illustrated step-by-step instructions for removing inserts using a valve seat extractor tool and installing new inserts.
3. Technicians are advised to keep parts clean and refer to other documents for specifications on reusable parts.
Caterpillar cat 313 f l excavator (prefix dje) service repair manual (dje0000...fjkskefksmeme
This document provides specifications and repair instructions for a 313F L excavator travel motor. It includes removal and disassembly procedures, specifications for individual parts, and assembly instructions. Key steps include draining oil, removing hoses and bolts to detach the motor, and using various tools to disassemble internal components like pistons, seals, and bearings. Reassembly follows the reverse of disassembly.
Caterpillar cat 316 e l excavator (prefix yzz) service repair manual (yzz0000...fjskekdmjekm
This document provides specifications and repair instructions for the travel motor in a 316E L excavator. It includes specifications for the travel motor guard group, travel motor and mounting group, and travel motor group. The repair instructions describe how to remove and disassemble the travel motor, including draining oil, removing hoses, bolts, seals, plates, discs, shafts and other components. Detailed illustrations accompany each step.
Caterpillar cat d6 r track type tractor (prefix 6hr) service repair manual (6...fjkskedmme
1) The document provides instructions for removing and installing front track roller frames and recoil springs on a D6R track-type tractor.
2) It describes using various tooling to gradually compress the recoil springs and remove the retainer in increments to avoid injury.
3) Fifteen steps are outlined for installing the front track roller frame back onto the rear frame.
Caterpillar cat d6 r track type tractor (prefix 6fr) service repair manual (6...fjkskedmme
The document provides instructions for removing and installing idler rollers and equalizer bars on a Caterpillar D6R track-type tractor. Key steps include using hoists and tools to remove idlers and bolts/retainers, cleaning and inspecting parts, lubricating seals with isopropyl alcohol, and testing assemblies for leaks before reinstallation. Special tools are required to correctly set seal depths and check end play clearance during assembly.
Caterpillar cat 336 d l excavator (prefix myg) service repair manual (myg0000...fjskekdmjekm
This document provides instructions for disassembling and assembling the swing motor of 336D L and 336D LN excavators. The disassembly procedure involves 26 steps to remove components like the head, pistons, barrel, housing, seals and bearings. The assembly procedure reverses the disassembly steps and includes cleaning and inspecting parts, applying oil, and torquing bolts to the specified value. Proper tools and safety precautions are noted throughout.
This document provides instructions for removing and installing a cylinder head on a C18 industrial engine. It includes:
1) Detailed steps for removing the cylinder head such as disconnecting hoses, sensors, and removing bolts.
2) Instructions for installing seals, gaskets and the cylinder head, applying anti-seize compound to bolts, and tightening the bolts in a specific sequence.
3) Notes about cleaning parts and using new gaskets when installing the cylinder head.
Caterpillar cat 336 f lxe excavator (prefix naj) service repair manual (naj00...fjkskedmme
The document provides instructions for disassembling the travel motor of a 336F XE or 336F LXE excavator. It lists 27 steps to completely disassemble the travel motor, removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and other internal parts. Precautions are provided to safely release spring forces and properly mark parts for reassembly. Tools required include various bolts, pins, adapters, and pullers to dismantle the motor.
1. The document provides instructions for removing and installing inlet and exhaust valve seat inserts from an excavator engine.
2. It describes the required tools and gives illustrated step-by-step instructions for removing inserts using a valve seat extractor tool and installing new inserts.
3. Technicians are advised to keep parts clean and refer to other documents for specifications on reusable parts.
Caterpillar cat 325 b excavator (prefix 8rr) service repair manual (8rr00001 ...fjsjjekdkme
This document provides assembly instructions for the final drive of an excavator model 325B L. It includes:
- A list of required tools and parts for assembly
- Detailed step-by-step instructions for installing bearings, seals, gears, carriers, and other components
- Procedures for determining correct bearing preload and shim thickness
- Notes on cleaning, lubricating, and torque specifications
The goal is to correctly assemble all internal components of the final drive, including installing carriers, gears, seals and adjusting bearing preloads, to achieve proper operation. Proper cleaning and lubrication of parts is emphasized.
Caterpillar cat 336 f l xe excavator (prefix ltp) service repair manual (ltp0...fjkskedmme
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, friction plates and other internal components. Detailed illustrations accompany each step to show how to properly remove parts and note their original positions for reassembly. Safety precautions are provided to warn of potential spring forces and contain any released fluids.
Caterpillar cat 336 f l xe excavator (prefix kgh) service repair manual (kgh0...fjkskedmme
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, swashplate, seals, springs, and other internal components. Detailed illustrations accompany each step to show how to properly disassemble the travel motor using the recommended tools. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l xe excavator (prefix mtw) service repair manual (mtw0...fjkskedmme
This document provides disassembly instructions for a travel motor on a 336F LN XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove each part in the proper sequence while maintaining their original positions and order for reassembly. Safety precautions are provided throughout to warn of potential spring forces or fluid containment.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 345 c excavator (prefix jar) service repair manual (jar00001 ...fjkskedmme
This document provides instructions for removing and installing the rear gear group on a 345C excavator. It details:
1) The required tools and parts for the job.
2) The step-by-step removal procedure which includes removing the electric starting motor, flywheel, rear gear components, seals, and bearings.
3) The installation procedure which provides directions for installing the rear gear group components in reverse order and ensuring proper bearing placement and torque specifications are followed.
Caterpillar cat m316 d wheeled excavator (prefix w6a) service repair manual (...fujsjefjwerkskemm
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 engine. It describes the required tools and steps to:
1) Lock the camshaft and crankshaft in position, remove bolts, and remove the standard or heavy-duty idler gear.
2) Clean and inspect the idler gear components, install the idler gear while aligning timing marks, install bolts, and check end play and backlash.
3) Ensure the number one piston is at top dead center before installing the idler gear in the correct position and alignment.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 345 c excavator (prefix spc) service repair manual (spc00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It begins with disassembly steps including removing the head, pins, plates, seals, brake piston, separator plates, disks, and rotating group components. Assembly steps are then listed in reverse order and include installing seals, spacers, piston assemblies, springs and other components back into the travel motor housing. Precautions are given such as cleaning parts and applying lubricant before assembly.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
Caterpillar cat 325 c l excavator (prefix amh) service repair manual (amh0000...fjkskedmme
This document provides instructions for removing and installing various engine components on Caterpillar 325C and 325C L excavators, including:
- Removing and installing the camshaft, camshaft gear, and camshaft bearings. Proper timing of the camshaft is emphasized.
- Removing and installing the engine oil pan. Safety precautions for hot oil and proper fluid containment are outlined.
- The document contains detailed step-by-step instructions, illustrations, and notes on proper component orientation for each procedure. Required tools are listed.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 320 track type excavator (prefix 1 kl) service repair manual ...cdfzxs
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and valve seals on Caterpillar 3064 and 3066 engines. The procedures include using various specialty tools to compress springs, extract components, and properly seat new parts. Technicians are advised to keep components clean and lubricate parts during installation.
Caterpillar cat 345 b excavator (prefix amd) service repair manual (amd00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor on a 345B Excavator. It outlines 33 steps to assemble internal components like pistons, seals, plates and housing pieces. Measurement checks are included to ensure correct assembly. The instructions also cover installing the assembled travel motor by cleaning mating surfaces, replacing an O-ring seal, and using lifting tools to slide the motor into position in the final drive housing.
Caterpillar cat 336 f lxe excavator (prefix pfl) service repair manual (pfl00...fjkskedmme
This document provides instructions for disassembling the travel motor on 336F XE and 336F LXE excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates. Detailed illustrations accompany each step to show how to position tools and disassemble individual parts. Safety notices warn of potential spring forces and ensure fluids are contained.
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjskefkemms
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the components and steps in the process.
John deere 40, 44, 51, 52, 60, 67, 70, & 70 a loaders service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 38 inch commercial walk behind mower service repair manualfdhjsekdme
This technical manual provides service information for John Deere 38, 48, and 54-inch commercial walk-behind mowers. It contains specifications, repair and diagnostic procedures, and safety information. The manual is intended for experienced technicians and covers engine, fuel, electrical, power train, steering, brake, and mower deck systems. Safety messages in the introduction emphasize the importance of following proper safety precautions when working on equipment.
John deere 30 inch hydraulic tiller service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 14 sz walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sx walk behind mower service repair manualfdhjsekdme
This document contains information related to walk-behind mowers manufactured by John Deere, including:
1. Model numbers and specifications for various mower models.
2. Safety warnings and instructions for handling fluids, batteries, and preparing for emergencies.
3. Tables providing repair specifications for engine components, including torque specifications.
The document provides general technical information for technicians servicing John Deere walk-behind mowers, including identifying models, safety practices, and specifications to guide repairs. It begins with safety instructions and then provides specifications and identification information for the different mower models and their components.
Caterpillar cat 325 b excavator (prefix 8rr) service repair manual (8rr00001 ...fjsjjekdkme
This document provides assembly instructions for the final drive of an excavator model 325B L. It includes:
- A list of required tools and parts for assembly
- Detailed step-by-step instructions for installing bearings, seals, gears, carriers, and other components
- Procedures for determining correct bearing preload and shim thickness
- Notes on cleaning, lubricating, and torque specifications
The goal is to correctly assemble all internal components of the final drive, including installing carriers, gears, seals and adjusting bearing preloads, to achieve proper operation. Proper cleaning and lubrication of parts is emphasized.
Caterpillar cat 336 f l xe excavator (prefix ltp) service repair manual (ltp0...fjkskedmme
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the head, springs, pistons, barrel assembly, friction plates and other internal components. Detailed illustrations accompany each step to show how to properly remove parts and note their original positions for reassembly. Safety precautions are provided to warn of potential spring forces and contain any released fluids.
Caterpillar cat 336 f l xe excavator (prefix kgh) service repair manual (kgh0...fjkskedmme
This document provides disassembly instructions for the travel motor on a 336F L XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing the motor head assembly, piston assemblies, barrel assembly, swashplate, seals, springs, and other internal components. Detailed illustrations accompany each step to show how to properly disassemble the travel motor using the recommended tools. Safety precautions are provided to warn of potential spring forces and contain fluids during disassembly.
Caterpillar cat 336 f l xe excavator (prefix mtw) service repair manual (mtw0...fjkskedmme
This document provides disassembly instructions for a travel motor on a 336F LN XE excavator. It lists 27 steps to fully disassemble the travel motor, including removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals, and more. Detailed illustrations accompany each step to show how to remove each part in the proper sequence while maintaining their original positions and order for reassembly. Safety precautions are provided throughout to warn of potential spring forces or fluid containment.
Caterpillar cat 16 h na motor grader (prefix 6zj) service repair manual (6zj0...fjskefkemms
This document provides instructions for removing and installing various engine components on a 16H NA Motor Grader with a 3406C engine, including:
1. Timing gears and plate removal and installation.
2. Camshaft removal and installation.
3. Camshaft bearing removal and installation.
4. Connecting rod bearing removal and installation.
5. Crankshaft main bearing removal and installation.
The instructions describe the individual steps for removing and installing each component, including the use of any necessary tools. Safety notices and additional notes are also provided throughout.
Caterpillar cat 345 c excavator (prefix jar) service repair manual (jar00001 ...fjkskedmme
This document provides instructions for removing and installing the rear gear group on a 345C excavator. It details:
1) The required tools and parts for the job.
2) The step-by-step removal procedure which includes removing the electric starting motor, flywheel, rear gear components, seals, and bearings.
3) The installation procedure which provides directions for installing the rear gear group components in reverse order and ensuring proper bearing placement and torque specifications are followed.
Caterpillar cat m316 d wheeled excavator (prefix w6a) service repair manual (...fujsjefjwerkskemm
This document provides instructions for removing and installing an idler gear on a Caterpillar C6.6 engine. It describes the required tools and steps to:
1) Lock the camshaft and crankshaft in position, remove bolts, and remove the standard or heavy-duty idler gear.
2) Clean and inspect the idler gear components, install the idler gear while aligning timing marks, install bolts, and check end play and backlash.
3) Ensure the number one piston is at top dead center before installing the idler gear in the correct position and alignment.
Caterpillar cat 324 e l excavator (prefix ldg) service repair manual (ldg0000...fjsekkdmme
This document provides instructions for disassembling and assembling the travel motor on 324E L and 324E LN Excavator models. The disassembly process involves removing 28 components from the travel motor including the head, springs, plates, seals, bearings and more. The assembly process is the reverse and includes lubricating components and using various tools to install components in the proper order and orientation. Precautions are provided to avoid damaging parts and ensure proper assembly.
Caterpillar cat 345 c excavator (prefix spc) service repair manual (spc00001 ...fjsekdmmeed
The document provides instructions for disassembling and assembling a travel motor. It begins with disassembly steps including removing the head, pins, plates, seals, brake piston, separator plates, disks, and rotating group components. Assembly steps are then listed in reverse order and include installing seals, spacers, piston assemblies, springs and other components back into the travel motor housing. Precautions are given such as cleaning parts and applying lubricant before assembly.
Caterpillar cat 325 b excavator (prefix 8fn) service repair manual (8fn00001 ...fjsjjekdkme
This document provides instructions for removing and installing a cylinder head on an excavator. It begins by listing other components that must first be removed, such as the fuel filter base, governor, fuel linkage, and manifolds. The removal procedure then instructs technicians to attach a lifting device to the cylinder head and remove bolts holding it to the cylinder block before removing the gasket. The installation procedure lists cleaning the mating surfaces and applying lubricant to the gasket before positioning the head and torquing the bolts to specifications.
Caterpillar cat 325 c l excavator (prefix amh) service repair manual (amh0000...fjkskedmme
This document provides instructions for removing and installing various engine components on Caterpillar 325C and 325C L excavators, including:
- Removing and installing the camshaft, camshaft gear, and camshaft bearings. Proper timing of the camshaft is emphasized.
- Removing and installing the engine oil pan. Safety precautions for hot oil and proper fluid containment are outlined.
- The document contains detailed step-by-step instructions, illustrations, and notes on proper component orientation for each procedure. Required tools are listed.
Caterpillar cat 336 e l excavator (prefix ked) service repair manual (ked0000...fjskekmdm
The document provides instructions for assembling a travel motor. It involves 27 steps including installing seals, springs, pistons, bearings and other components in the proper order and orientation. The travel motor is then installed by attaching it to the final drive assembly using bolts and following markings to ensure correct alignment. Disassembly is reversed, removing hoses, bolts, seals and other parts, taking care when handling components due to weight and pressures.
Caterpillar cat 330 l excavator (prefix 8fk) service repair manual (8fk00001 ...fjsjekdmmeme
This document provides instructions for removing and installing a cylinder head on a 330L excavator with a 3306 engine. The key steps are:
1. Remove components attached to the cylinder head like the exhaust manifold, fuel lines, and rocker shaft.
2. Remove the cylinder head bolts and lifting the heavy cylinder head off the engine.
3. Clean the mating surfaces and install a new gasket before reinstalling the cylinder head and torquing the bolts in the specified sequence.
4. Reinstall the removed components like the rocker shaft after installing the new cylinder head.
Caterpillar cat 320 track type excavator (prefix 1 kl) service repair manual ...cdfzxs
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and valve seals on Caterpillar 3064 and 3066 engines. The procedures include using various specialty tools to compress springs, extract components, and properly seat new parts. Technicians are advised to keep components clean and lubricate parts during installation.
Caterpillar cat 345 b excavator (prefix amd) service repair manual (amd00001 ...fjsekdmmeed
This document provides assembly instructions for a travel motor on a 345B Excavator. It outlines 33 steps to assemble internal components like pistons, seals, plates and housing pieces. Measurement checks are included to ensure correct assembly. The instructions also cover installing the assembled travel motor by cleaning mating surfaces, replacing an O-ring seal, and using lifting tools to slide the motor into position in the final drive housing.
Caterpillar cat 336 f lxe excavator (prefix pfl) service repair manual (pfl00...fjkskedmme
This document provides instructions for disassembling the travel motor on 336F XE and 336F LXE excavator models. The 27-step procedure includes removing components like the motor head assembly, piston assemblies, barrel assembly, springs, seals and plates. Detailed illustrations accompany each step to show how to position tools and disassemble individual parts. Safety notices warn of potential spring forces and ensure fluids are contained.
Caterpillar cat 330 b l excavator (prefix 5lr) service repair manual (5lr0000...fjskefkemms
This document provides instructions for removing and installing various engine components on Caterpillar 330B L and 330B LN excavator models, including the cylinder head, spacer plate, water directors, lifter group, and camshaft. The procedures describe cleaning parts, applying lubricants, and tightening bolts to specified torques. Detailed illustrations show the components and steps in the process.
John deere 40, 44, 51, 52, 60, 67, 70, & 70 a loaders service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 38 inch commercial walk behind mower service repair manualfdhjsekdme
This technical manual provides service information for John Deere 38, 48, and 54-inch commercial walk-behind mowers. It contains specifications, repair and diagnostic procedures, and safety information. The manual is intended for experienced technicians and covers engine, fuel, electrical, power train, steering, brake, and mower deck systems. Safety messages in the introduction emphasize the importance of following proper safety precautions when working on equipment.
John deere 30 inch hydraulic tiller service repair manualfdhjsekdme
This technical manual provides specifications and information for John Deere backhoes, loaders, and attachments. It includes specifications on hydraulic systems, function times, capacities, dimensions, cycle times, and torque values. The manual aims to equip technicians with the information needed to work on and service various John Deere equipment.
John deere 14 sz walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sx walk behind mower service repair manualfdhjsekdme
This document contains information related to walk-behind mowers manufactured by John Deere, including:
1. Model numbers and specifications for various mower models.
2. Safety warnings and instructions for handling fluids, batteries, and preparing for emergencies.
3. Tables providing repair specifications for engine components, including torque specifications.
The document provides general technical information for technicians servicing John Deere walk-behind mowers, including identifying models, safety practices, and specifications to guide repairs. It begins with safety instructions and then provides specifications and identification information for the different mower models and their components.
John deere 14 st walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 se walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sc walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 sb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests and adjustments.
John deere 14 pz walk behind mower service repair manualfdhjsekdme
This document contains information related to John Deere walk-behind mowers. It includes:
1. Specifications for various mower models including the 12PB/12PC/12SB, 14PB/14PT/14PZ/14SB, 14SC/14SX/14SE/14ST, and 14SZ.
2. Repair specifications for Briggs & Stratton 2-cycle and 4-cycle engines, Kawasaki 4-cycle engines, and Kansaki 2- and 5-speed transaxles.
3. Safety information related to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns from battery electrolyte.
John deere 14 pt walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests and adjustments.
John deere 14 pb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair the mowers.
John deere 12 sb walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications for various mower models, repair specifications for engines and components, information on fuels and lubricants, and locations for identifying serial numbers. The document outlines sections on general information, engine repair, fuel and air systems, electrical systems, power trains, tests and adjustments, and miscellaneous repair items. It provides technicians with the information needed to service, diagnose, and repair components.
John deere 12 pc walk behind mower service repair manualfdhjsekdme
This document contains sections and groups related to service information for John Deere 21-inch rear discharge walk-behind rotary mowers. It includes specifications, repair procedures, diagnostics, and testing for various mower components including engines made by Briggs & Stratton and Kawasaki, as well as transmissions. Safety precautions are provided at the beginning relating to handling fluids, preventing battery explosions, preparing for emergencies, and preventing acid burns. The document is organized into sections covering general information, engine repair, fuel/air systems, electrical systems, power trains, and operational tests/adjustments.
John deere 12 pb walk behind mower service repair manualfdhjsekdme
This document is the technical manual for John Deere 21-inch rear discharge walk-behind rotary mowers. It provides specifications, repair and diagnostic information for the mowers and their components. The manual is divided into sections covering general information, engine repair for different engine types, fuel and air systems, electrical systems, power trains, tests and adjustments, and troubleshooting. It contains detailed instructions and specifications to guide technicians in servicing and repairing the mowers. Model numbers covered include models with Briggs & Stratton 2-cycle and 4-cycle engines as well as Kawasaki 4-cycle engines.
Clark ecg 20 32 genesis series truck service repair manualfdhjsekdme
This document provides instructions for safely maintaining a Clark industrial lift truck. It discusses safety signs and messages, safe maintenance practices, lifting and jacking procedures, towing instructions, and general shop precautions. Key safety points include wearing protective equipment, raising drive wheels off the floor before working, disconnecting batteries, checking for fuel and electrical issues, and only allowing trained personnel to perform maintenance.
Clark ec 120 forklift service repair manualfdhjsekdme
This section provides instructions for safely lifting, jacking and blocking a forklift truck. It describes how to use the upright as a lever to raise just the drive wheels off the floor for service. It also explains how to raise the rear or entire truck using a jack and secure blocking. Safety precautions are emphasized, such as ensuring lifting equipment has adequate capacity and the truck is stable before working on it.
Clark ec 90 forklift service repair manualfdhjsekdme
This section provides instructions for safely lifting, jacking and blocking a forklift truck. It describes how to use the forklift's upright as a lever to raise just the drive wheels off the floor for service. It also provides guidelines for raising the rear or entire truck using lifting equipment with adequate capacity. Safety precautions are outlined, such as ensuring the forklift is on level ground, in neutral with the brakes set before lifting. Defective lifting equipment should not be used.
Clark e357 forklift service repair manualfdhjsekdme
This document is a service manual for Clark lift trucks. It provides maintenance and repair procedures for technicians. The manual contains sections on safety practices, planned maintenance schedules, component inspections and repairs, specifications, and schematics. Regular maintenance is important to keep lift trucks in safe operating condition. Only trained personnel should perform repairs following the manufacturer's recommended procedures.
Clark dpx 55 forklift service repair manualfdhjsekdme
The document provides instructions for removing and installing a transmission on a Clark forklift. It describes disconnecting all transmission connections, draining the oil, removing mounting bolts and lowering the transmission out of the truck using lifting equipment. Installation involves bolting the torque converter to the engine flywheel through an access port, then lifting the transmission into place and reconnecting all lines and linkages. Safety precautions are noted such as securing the truck before starting and keeping inspection openings covered.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 313F L EXCAVATOR DJE
Configuration: 313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine
Disassembly and Assembly
312F, 313F, 313F L Excavator Machine Systems
Media Number -M0064712-03 Publication Date -01/08/2015 Date Updated -27/06/2018
i04629357
Travel Motor
SMCS - 5111; 5811-KV
Specifications
Note: Callouts in the Specifications section do not match the callouts in the Remove and Install
sections.
Illustration 1 g02727178
Table 1
Specification for 163-3754 Travel Motor Guard Gp
Item Qty Part Specification Description
1 8 135-8576 Locking Bolt As Torque to 130 ± 10 N·m (96 ± 7 lb ft).
1/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 2 g02727176
Table 2
Specification for 185-6952 Travel Motor and Mounting Gp
Item Qty Part Specification Description
1 3 095-0707 Bolt Torque to 240 ± 40 N·m (177 ± 30 lb ft).
2 6 8T-4176 Bolt Torque to 80 ± 8 N·m (59 ± 6 lb ft).
2/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g02744857
NOTICE
To prevent damage to the motor, the case must be filled with clean
hydraulic oil at least to the fill port before operation.
Table 3
Specification for 185-6953 Travel Motor Gp
Item Qty Part Specification Description
1 2
087-4743
Stop
Torque to 140 ± 14 N·m (103 ± 10 lb ft).
2 1
147-5860
Piston
Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
3 1
122-5114
Ball Guide
Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
4 9
118-4057
Spring
Length under test force is 31.0 mm (1.22 inch).
Test force is 360 ± 36 N (81 ± 8 lb).
Free length after test is 35.900 mm (1.4134 inch).
5 1
094-1882
Plug
Not required for the optional design for the body.
6 10
094-1882
Plug
Apply blue Loctite high flex GM to the threads of the plug.
Torque to 13 ± 2 N·m (115 ± 18 lb in).
7 - -
Apply blue Loctite high flex GM or white Loctite Low Breakloose
between the mating surfaces of the 096-4376 Lip Type Seal and the
body.
8 1
095-7380
Spring
Length under test force is 13.0 mm (0.51 inch).
Test force is 14.3 ± 1.5 N (3.2 ± 0.3 lb).
Free length after test is 15.000 mm (0.5905 inch).
10 2
346-1340
Piston
Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
11 1
133-6777
Barrel
Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
12 Ensure that the following conditions are fulfilled during shims installation.
When parking brake release port (9) is vented to the air, the motor output shaft does not
rotate with a torque of 407 N·m (300 lb ft) or less.
When pressure at parking brake release port (9) is 780 kPa (113 psi), the motor output shaft
rotates with a torque of 49 N·m (36 lb ft) or less. Both the inlet port and the outlet port
must be open to the hydraulic tank.
As required, use the following shims in order to adjust the height of springs for parking
brake torque:
3/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 1 096-1521
Shim
Thickness is 1.0 mm (0.04 inch).
1
096-3785
Shim
Thickness is 1.2 mm (0.05 inch).
1
096-3786
Shim
Thickness is 1.4 mm (0.06 inch).
1
096-3787
Shim
Thickness is 1.6 mm (0.06 inch).
1
096-3788
Shim
Thickness is 1.8 mm (0.07 inch).
096-1522
Shim
Thickness is 2.0 mm (0.08 inch).
13 10
8T-4944
Bolt
Torque to 177 ± 18 N·m (131 ± 13 lb ft).
14 1
7Y-4216
Spool
Lubricate the sliding surfaces lightly with 309-6932 Hydraulic Oil.
15 1
096-3978
Spring
Length under test force is 24.0 mm (0.94 inch).
Test force is 74 ± 8 N (17 ± 2 lb).
Free length after test is 34.700 mm (1.3661 inch).
Removal Procedure
Table 4
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
Start By:
a. Remove the travel brake valve. Refer to Disassembly and Assembly, "Counterbalance Balance
(Travel) - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
4/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. Dispose of all fluids according to local regulations and mandates.
NOTICE
Keep all parts clean from contaminants.
Contamination of the hydraulic system with foreign material will
reduce the service life of the hydraulic system components.
To prevent contaminants from entering the hydraulic system, always
plug or cap the lines, fittings, or hoses as they are disconnected. Cover
any disassembled components and clean them properly before
assembly.
Clean the hydraulic system properly after any major component
exchange or especially after a component failure, to remove any
contamination.
1. Drain the oil from the final drive into a suitable container for storage or disposal.
Illustration 4 g00707275
2. Disconnect hose assemblies (1) and (3).
3. Remove two of four bolts (2) that secure the travel motor to the final drive.
5/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 5 g00878121
4. Install Tooling (A) in the place of the two bolts (2) that were removed.
5. Remove remaining bolts (5) that secure travel motor (4) to the final drive.
Illustration 6 g00707267
6. Attach a suitable lifting device to travel motor (4).
7. Carefully pull travel motor (4) out of the final drive. The weight of travel motor (4) is
approximately 57 kg (125 lb).
Illustration 7 g00878123
8. Remove O-ring seal (6) from the travel motor.
6/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Disassembly Procedure
Table 5
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- Threaded RodM12 x 1.75 by 250 mm (10 in) long 1
B
8T-0651 Bolt 1
8T-4167 Hard Washer 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
F 1P-1861 Retaining Ring Pliers 1
Start By:
a. Remove the travel motor. Refer to Disassembly and Assembly, "Travel Motor - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the outside of the travel motor prior to disassembly.
2. Fasten the travel motor in Tooling (A) in a vertical position. The weight of the travel motor is
approximately 60 kg (132 lb).
7/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. 3. Put an alignment mark across the head and the body of the travel motor for assembly purposes.
The head must be reinstalled in the head's original position on the body of the travel motor.
Illustration 8 g00887295
Note: During the removal of head (2) from the travel motor, be careful not to damage the
mating surfaces of the components.
Spring force can cause personal injury or death.
Do not repair until you have read the Operation and Maintenance
Manual.
4. Remove bolts (1).
5. Remove head (2) from the body of the travel motor.
Illustration 9 g00887302
6. Remove O-ring seal (3), port plate (4), and bearing (5).
8/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 10 g00887311
7. Remove O-ring seals (6). Remove springs (7).
Illustration 11 g00887331
Illustration 12 g00890074
This is an example of the use of Tooling (B).
8. Place a shop towel over brake piston (8). Retain brake piston (8) with Tooling (B). Apply
approximately 525 kPa (75 psi) of shop air pressure to brake release Port (Y). Make sure that
the shop air pressure is free of water. Brake piston (8) will move up the piston guide, and out of
the piston guide. Remove brake piston (8) from the body of the travel motor.
9/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M00644...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 13 g00887336
9. Remove seal (9) and backup ring (10) from the brake piston.
10. Remove seal (11) and backup ring (12) from the brake piston.
Illustration 14 g00887355
11. Remove plates (13) and friction discs (14).
Illustration 15 g00887401
10/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 16 g00887405
12. Install Tooling (C) into shaft (15). Use a prybar to remove the rotating assembly (16) from the
housing.
13. Remove Tooling (C) from shaft (15).
Illustration 17 g00887424
14. Remove shaft (15) from rotating assembly (16).
Illustration 18 g00887426
15. Use Tooling (D) in order to remove retaining ring (17) from shaft (15).
11/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 19 g00887445
16. Install shaft (15) into a suitable press. Remove bearing race (18) from the shaft.
Illustration 20 g00887463
17. Rotate shaft (15). Install shaft (15) into a suitable press. Install Tooling (E). Remove bearing
race (19) from shaft (15).
Illustration 21 g00887501
18. Remove cam plate (20) from barrel assembly (21).
12/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. Illustration 22 g00887520
19. Remove piston assemblies and retainer plate (22) from barrel assembly (21).
Note: Place marks on the pistons and the barrel assembly. The pistons must be returned to the
original position.
Illustration 23 g00887558
20. Remove ball (23) and springs (24).
Illustration 24 g00887578
21. Remove bearing (25).
13/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. 22. Remove keys (26) and locating pins (not shown) from the body of the travel motor.
Illustration 25 g00887589
23. Rotate the housing. Use Tooling (F) in order to remove retaining ring (27).
24. Remove seal (28).
Illustration 26 g00887619
25. Remove bolts (29) and cover (30).
Illustration 27 g00887729
26. Remove seal (31) and backup ring (32).
14/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 28 g00887754
27. Remove piston actuator (33) and seal (34).
Illustration 29 g00887762
28. Remove O-ring seal (35) from the housing of the travel motor.
Assembly Procedure
Table 6
Required Tools
Tool Part Number Part Description Qty
A
1U-7506 Adapter 1
8T-4244 Nut 6
8T-4223 Hard Washer 6
- M12 x 1.75 X 250 mm (10 inch) Threaded Rod 1
C 3E-3882 Eyebolt 1
D 1P-1859 Retaining Ring Pliers 1
E
1P-0510 Driver Gp 1
9S-9152 Bearing Puller Gp 1
15/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. F 1P-1861 Retaining Ring Pliers 1
G - Loctite 242 -
Illustration 30 g00887762
1. Install O-ring seal (35) onto the housing of the travel motor.
Illustration 31 g00887754
2. Install seal (34) and piston actuator (33). Lubricate the surfaces of piston actuator (33) with
lubricant that is being sealed.
Illustration 32 g00887729
16/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 3. Install backup ring (32) and seal (31).
Illustration 33 g00887619
4. Install cover (30) and bolts (29). Tighten bolts (29) to a torque of 28 ± 7 N·m (21 ± 5 lb ft).
Illustration 34 g00887589
5. Apply Tooling (G) to the mating surface of lip seal (28). Use Tooling (E) in order to install lip
seal (28). Lubricate the sealing lip of lip seal (28) with lubricant that is being sealed.
6. Use Tooling (F) in order to install retaining ring (27).
Illustration 35 g02107975
7. Rotate the housing.
17/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. 8. Install keys (26) and locating pins (not shown) into the body of the travel motor.
9. Install bearing (25).
Illustration 36 g00887558
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
10. Install springs (24) into the barrel assembly. Install ball (23) onto springs (24). Lubricate ball
(23) with lubricant that is being sealed.
Illustration 37 g00887520
11. Lubricate the piston assemblies with lubricant that is being sealed. Install piston assemblies and
retainer plate (22) into barrel assembly (21).
Note: Take note of the mark on the piston assembly and the barrel assembly. The pistons must
be returned to the same position.
18/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 38 g00887501
12. Lubricate cam plate (20) with lubricant that is being sealed. Install cam plate (20) onto barrel
assembly (21).
Illustration 39 g00888697
13. Install shaft (15) into a suitable press. Install bearing race (19) onto shaft (15).
Illustration 40 g00887426
14. Rotate shaft (15) in the suitable press. Use Tooling (D) to install retaining ring (17) onto shaft
(15).
19/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Illustration 41 g00888710
15. Install bearing race (18) onto shaft (15).
Note: Bearing race (18) must contact retaining ring (17).
Illustration 42 g00887405
16. Install Tooling (C) into shaft (15). Install shaft (15) into rotating assembly (16).
17. Place the pump housing into Tooling (A).
Illustration 43 g02107957
18. Use Tooling (C) in order to install rotating assembly (16) into the housing.
20/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Illustration 44 g00887501
Illustration 45 g02107975
19. The notches in cam plate (20) must align with keys (26). The keys are located in the bottom of
the housing of the travel motor.
Illustration 46 g00887355
20. Install plates (13) and friction discs (14) into the housing.
Note: Install the plates and the discs alternately.
21/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Illustration 47 g00887336
21. Install backup ring (12) and seal (11) onto the brake piston.
22. Install backup ring (10) and seal (9) onto the brake piston.
Illustration 48 g00888967
23. Rotate brake piston (8).
24. Install brake piston (8) into the housing.
Note: Brake piston (8) must be level upon installation. The brake piston must be level in order
to prevent damage to the O-ring seals.
Illustration 49 g00887311
22/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. 25. Install springs (7) and O-ring seals (6).
Illustration 50 g00887302
26. Lubricate port plate (4) with lubricant that is being sealed. Install O-ring seal (3), port plate (4),
and bearing (5).
Illustration 51 g00887295
Improper assembly of parts that are spring loaded can cause bodily
injury.
To prevent possible injury, follow the established assembly procedure
and wear protective equipment.
27. Install head (2) onto the body of the travel motor.
Note: During the installation of head (2) onto the travel motor, be careful not to damage the
mating surfaces of the components.
28. Install bolts (1). Tighten bolts (1) to a torque of 177 ± 18 N·m (130.5 ± 13.27 lb ft).
23/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. End By:
a. Install the travel motor.
Installation Procedure
Table 7
Required Tools
Tool Part Number Part Description Qty
A 9U-7692 Threaded Rod 2
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
1. Thoroughly clean the mating surfaces of the travel motor and the final drive.
Illustration 52 g00878123
2. Install new O-ring seal (6). Apply clean hydraulic oil on the O-ring seal.
24/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 53 g00707267
3. Attach a suitable lifting device to travel motor (4), as shown.
4. The weight of the travel motor is approximately 57 kg (125 lb).
Illustration 54 g00878121
5. Carefully install travel motor (4) onto Tooling (A). Slide the travel motor into the final drive.
6. Install one of three bolts (5) that secures the travel motor to the final drive.
7. Remove Tooling (A).
Illustration 55 g00707275
Typical example
25/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
28. 8. Install remaining bolts (2).
9. Connect hose assembly (3). Connect hose assembly (1).
10. Fill the final drive with oil.
Reference: Refer to Operation and Maintenance Manual, "Lubricant Viscosities" for the
proper oil viscosity.
Reference: Refer to Operation and Maintenance Manual, "Final Drive Oil Level - Check" for
the correct filling procedure.
11. Install high efficiency filters in place of the pilot filter, the case drain filter, and the return filter.
Note: High efficiency filters should not be run for more than 250 hours before you change back
to the standard filters.
12. Obtain a hydraulic oil sample from the main S·O·S port.
Reference: Refer to Operation and Maintenance Manual, "Sampling Interval and Location of
Sampling Valve" for the correct location.
13. If the S·O·S sample exceeds ISO 18/15, flush the hydraulic system.
Reference: Refer to Contamination Control Guidelines, SEBF8436, "Hydraulic System
Flushing Procedure for 322C Hydraulic Excavators" for further information.
End By:
a. Install the travel brake valve. Refer to Disassembly and Assembly, "Travel Brake Valve -
Install".
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Tue Jun 9 23:02:47 UTC+0800 2020
26/26
313F L Excavator DJE00001-UP (MACHINE) POWERED BY C4.4 Engine(M006...
2020/6/9
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...