This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and outlines 23 steps to disassemble the components. The steps include draining fluids, removing covers, plates, gears, seals, springs, and other internal parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids.
Caterpillar cat 312 f gc excavator (prefix fke) service repair manual (fke000...fjjsieskekfmmse
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and outlines a step-by-step process to disassemble each component. Safety notices are included to warn technicians of potential hazards like parts propelled by springs or pressurized hydraulic fluid. The document also notes part numbers, weights, and alignment marks needed for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts, and outlines 23 steps to disassemble components such as the sprockets, traction control valve, piston assemblies, barrel assembly, and planetary gear assemblies. Safety notices are included regarding releasing pressures and springs. The overall document provides detailed instructions for technicians to fully disassemble several core systems of the excavator.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and other components while taking safety precautions for things like pressurized fluids and springs.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
Caterpillar cat 312 f gc excavator (prefix fke) service repair manual (fke000...fjjsieskekfmmse
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts and outlines a step-by-step process to disassemble each component. Safety notices are included to warn technicians of potential hazards like parts propelled by springs or pressurized hydraulic fluid. The document also notes part numbers, weights, and alignment marks needed for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and safety precautions and gives step-by-step instructions to remove components like sprockets, fittings, valves, bearings, seals, plates, pistons, springs, and housings. Detailed illustrations accompany each step to ensure correct disassembly and orientation of parts for reassembly. Fluid drainage and weight information is provided for heavy components.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 312F GC excavator. It lists the required tools and parts, and outlines 23 steps to disassemble components such as the sprockets, traction control valve, piston assemblies, barrel assembly, and planetary gear assemblies. Safety notices are included regarding releasing pressures and springs. The overall document provides detailed instructions for technicians to fully disassemble several core systems of the excavator.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and other components while taking safety precautions for things like pressurized fluids and springs.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to identify each part and show their position. Safety notices are included to warn of potential injuries from springs or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fdhjsekdme
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...dikdkskdmmd
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Detailed illustrations supplement each disassembly step.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety precautions are provided to release pressures and contain fluids. Tools required are also listed.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and plates. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed in a table at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing pressurized components or springs. The goal is to disassemble the major assemblies into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Dismantling requires specialty tools like pullers, wrenches, and pliers.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...fdhjsekdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed at the start, including link brackets, a transmission repair stand, bolts, pullers, and wrenches.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from springs or pressurized components. Required tools include pullers, drivers, wrenches, and other equipment to properly remove parts in their listed order.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed at the start, including link brackets, a transmission repair stand, bolts, pullers, and wrenches.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...dikdkskdmmd
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Dismantling requires specialty tools like pullers, wrenches, and pliers.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Pictures and diagrams accompany each step to illustrate how to remove parts like sprockets, valves, pistons, gears, seals and other components. Safety notices are included throughout to warn of potential injury from parts or stored energy.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
JCB 2DX Backhoe Loader Service Repair Manual Instant Download.pdfrishang96299
This service manual provides instructions for servicing the backhoe loader model 2DX. It contains 15 sections covering various systems of the machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, and electrical systems. The excerpt focuses on servicing instructions for the engine, including safety procedures, technical specifications, operating instructions, and steps to drain and fill oil, clean parts, check oil levels, and remove and install engine components.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to identify each part and show their position. Safety notices are included to warn of potential injuries from springs or fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...fdhjsekdme
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...dikdkskdmmd
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Detailed illustrations supplement each disassembly step.
Caterpillar cat 313 f lgc excavator (prefix hdk) service repair manual (hdk00...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and other parts. Safety precautions are provided to release pressures and contain fluids. Tools required are also listed.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to accompany each step for properly removing parts like sprockets, valves, gears, seals and more. Safety notices are included throughout to warn of potential injury from parts or fluids.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists required tools and outlines 16 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and plates. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluids.
The document provides disassembly instructions for the final drive and travel motor of a 313F LGC excavator. It describes removing over 50 individual parts in 3 main sections: disassembly of the final drive and travel motor, disassembly of the counterbalance valve, and disassembly of the travel motor. Detailed illustrations are provided to show each step. Safety notices warn of potential injuries from springs or fluids and recommend proper protective equipment.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed in a table at the beginning.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing pressurized components or springs. The goal is to disassemble the major assemblies into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Dismantling requires specialty tools like pullers, wrenches, and pliers.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...fdhjsekdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed at the start, including link brackets, a transmission repair stand, bolts, pullers, and wrenches.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...jdfjskekmdme
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from springs or pressurized components. Required tools include pullers, drivers, wrenches, and other equipment to properly remove parts in their listed order.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Safety notices are included throughout to warn of potential injuries from parts propelled by springs or releasing pressurized fluids. Required tools are listed at the start, including link brackets, a transmission repair stand, bolts, pullers, and wrenches.
Caterpillar cat 313 f lgc excavator (prefix gjd) service repair manual (gjd00...dikdkskdmmd
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists 19 steps to disassemble the components, including draining fluids, removing covers, pistons, springs, and seals. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized fluids. Dismantling requires specialty tools like pullers, wrenches, and pliers.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Pictures and diagrams accompany each step to illustrate how to remove parts like sprockets, valves, pistons, gears, seals and other components. Safety notices are included throughout to warn of potential injury from parts or stored energy.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 313F LGC excavator. It lists over 30 detailed steps to disassemble components like the final drive housing, travel motor barrel assembly, planetary gear sets, and counterbalance valve assemblies. Proper tools are required and safety precautions must be followed when releasing springs or draining fluids. The goal is to disassemble the major components into their individual parts to prepare for cleaning, inspection or repair.
Similar to Caterpillar Cat 312F GC Excavator (Prefix FKE) Service Repair Manual Instant Download.pdf (20)
JCB 2DX Backhoe Loader Service Repair Manual Instant Download.pdfrishang96299
This service manual provides instructions for servicing the backhoe loader model 2DX. It contains 15 sections covering various systems of the machine including the engine, fuel system, cooling system, brakes, steering, hydraulics, and electrical systems. The excerpt focuses on servicing instructions for the engine, including safety procedures, technical specifications, operating instructions, and steps to drain and fill oil, clean parts, check oil levels, and remove and install engine components.
This document provides instructions for removing and reassembling the final drives on an excavator model 330B. The summary is:
1. The final drive must be disassembled by removing components like the ring gear, carrier assemblies, planetary gears, and seals.
2. To reassemble, components must be cleaned and seals/bearings installed before refitting parts like the carrier assemblies, ring gear, and sprocket in their original positions.
3. Precise measurements and torque specifications must be followed to set bearing preload and install retaining rings and bolts correctly.
This document provides instructions for removing and installing a cylinder head on a 325B L excavator powered by a 3116 engine. The removal procedure involves removing several other components first, like the fuel filter base and injectors. To remove the cylinder head, lifting devices are attached and bolts holding it to the cylinder block are removed. A new cylinder head gasket is installed when reinstalling the cylinder head. Precautions are given to contain fluids and keep parts clean from contaminants.
Caterpillar Cat 325B L Excavator (Prefix 5BS) Service Repair Manual Instant D...rishang96299
This document provides instructions for removing and installing a cylinder head on a 325B L excavator powered by a 3116 engine. The removal procedure involves removing several other components first, like the fuel filter base and injectors. To remove the cylinder head, lifting devices are attached and bolts holding it to the cylinder block are removed. When installing, the mating surfaces are cleaned and a new cylinder head gasket is used. Torque values and cleaning contaminants are emphasized.
This document provides instructions for disassembling and assembling the travel motor of 324E L and 324E LN Excavator models. It lists the required tools and parts and provides step-by-step instructions and illustrations for removing and installing components like the motor head, brake piston, rotating assembly, bearings, seals and other internal parts. Precautions are included to properly handle springs and ensure correct positioning of parts during assembly.
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and note proper alignment of parts, use of lubrication and tools.
Caterpillar Cat 324E L Excavator (Prefix TLF) Service Repair Manual Instant D...rishang96299
This document provides instructions for disassembling and assembling the travel motor of 324E L and 324E LN Excavator models. It lists the required tools and provides step-by-step instructions and illustrations for removing and installing each component of the travel motor. The components include the head, port plate, bearings, brake piston, seals, plates, discs, shaft, races, cam plate, piston assemblies, seals, cover, and more. Precautions are provided regarding spring force and proper placement of parts.
Caterpillar Cat 324E L Excavator (Prefix LDG) Service Repair Manual Instant D...rishang96299
1. The document provides step-by-step instructions for disassembling and assembling the travel motor of a 324E LN excavator.
2. It details 27 steps to disassemble components like the head, brake piston, rotating assembly, and seals.
3. The 28 steps for assembly instruct to reinstall these components in reverse order and include lubricating mating surfaces.
Caterpillar Cat 324E L Excavator (Prefix KTE) Service Repair Manual Instant D...rishang96299
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
Caterpillar Cat 324E L Excavator (Prefix JCZ) Service Repair Manual Instant D...rishang96299
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process is described in 27 steps and involves removing components like the motor head, brake piston, rotating assembly, seals, and bearings. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts. Tools required include retaining ring pliers, drivers, pullers, and press equipment. Cautions are provided about spring loading and containing fluids during repair work.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process includes removing 28 components from the travel motor housing including the head, brake piston, plates, springs, seals and bearings. The assembly section outlines 28 steps to reinstall these components in reverse order using various tools. Special care must be taken when working with pressurized components or parts under spring force.
This document provides instructions for disassembling and assembling the travel motor on 324E and 324E L excavator models. The disassembly process involves removing 28 components from the travel motor including the head, brake piston, plates, springs and seals. The assembly process reverses the disassembly steps and includes lubricating components and ensuring proper alignment of parts like the cam plate keys and piston marks. Special tools are required for tasks like removing races and seals.
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. It includes 28 steps for disassembly that remove components like the motor head, seals, plates, discs, bearings, and housing pieces. The 28 steps for assembly install these same components in reverse order and include notes about cleaning, applying lubricant, and ensuring proper positioning of parts. Tools required are also listed.
The document provides instructions for disassembling the final drive of an excavator. Key steps include:
1. Marking the final drive for alignment and securing it to a repair stand.
2. Removing bolts and lifting devices to extract the cover and internal gears and shafts.
3. Using retaining ring pliers and presses to separate additional components like carriers.
4. Hammering out pins to dismantle planetary gear sets from within the carriers.
This document provides the disassembly and assembly procedures for a travel motor on excavator models 324D L and 324D LN. The disassembly procedure is outlined in 28 steps and includes removing components like the head, seals, springs, plates, and bearings. The assembly procedure reverses the disassembly steps in 15 illustrated steps and provides notes on cleaning, applying thread lock compound and lubricant, and ensuring parts are returned to their original positions.
Caterpillar Cat 324D L Excavator (Prefix TRH) Service Repair Manual Instant D...rishang96299
This document provides the disassembly and assembly procedures for a 324D LN excavator travel motor. It includes 28 steps for disassembly that remove components like the motor head, seals, plates, discs, bearings, and housing pieces. The 28 steps for assembly install these same components in reverse order and include notes about cleaning, applying lubricant, and ensuring proper positioning of parts. Tools required are also listed.
Caterpillar Cat 324D L Excavator (Prefix SYM) Service Repair Manual Instant D...rishang96299
This document provides disassembly instructions for the final drive of an excavator model 324D L and 324D LN. The 31 step procedure includes removing the final drive housing, cover, gears, carriers, shafts, seals and other components. Special tools are listed that are required, and safety notes about cleanliness and part markings for reassembly are provided. Detailed illustrations accompany each step to show how to disassemble the various parts of the final drive.
Caterpillar Cat 324D L Excavator (Prefix PYT) Service Repair Manual Instant D...rishang96299
This document provides instructions for disassembling and assembling the final drive of a 324D L Excavator. The assembly procedure involves 37 steps and requires various tools. Key steps include pressing bearings into housings, measuring bearing preload, installing seals using special tools, and applying anti-seize compound to surfaces. Cleanliness is emphasized throughout to prevent contamination.
Caterpillar Cat 324D L Excavator (Prefix JJG) Service Repair Manual Instant D...rishang96299
The document provides instructions for disassembling a final drive on an excavator. It lists required tools and a multi-step process involving removing bolts, gears, carriers, shafts, seals, and other components. Cleanliness is important to prevent dirt from entering during disassembly. Parts must be reinstalled in their original locations later. Various components like covers, gears and carriers are removed using lifting devices due to their significant weights ranging from 30-312 kg.
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312F GC EXCAVATOR FKE
Configuration: 312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly
312F and 313F Excavators Machine Systems
Media Number -UENR6138-02 Publication Date -01/03/2015 Date Updated -14/12/2017
i05831822
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3938 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor.
NOTICE
1/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sat Jun 13 23:37:00 UTC+0800 2020
23/23
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(S...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312F GC EXCAVATOR FKE
Configuration: 312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine
Disassembly and Assembly
312F and 313F Excavators Machine Systems
Media Number -UENR6138-02 Publication Date -01/03/2015 Date Updated -14/12/2017
i07219742
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 422-5474 M16x2x24 mm Lifting Eye Assembly 2
B 1P-2420 Transmission Repair Stand 1
C 8H-0663 Bearing Puller Assembly 1
D 422-5473 M12x1.75x21 mm Lifting Eye Assembly 2
E 422-5472 M10x1.5x16 mm Lifting Eye Assembly 2
F 1U-9895 Crossblock 1
Start By:
a. Remove the final drive and the travel motor assembly.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat®
products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor assembly. The weight of the
sprocket is approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
Illustration 1 g06256385
4. Use Tooling (A) and a suitable lifting device to position final drive assembly (1) onto
Tooling (B). The weight of final drive assembly (1) is approximately 163 kg (360 lb).
2/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
28. 5. Drain the oil from final drive assembly (1) into a suitable container for storage or for
disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity
of the final drive.
Illustration 2 g06256798
6. Remove plug (2), plugs (3), and the O-ring seals.
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
Illustration 3 g06256843
3/22
312F GC Excavator FKE00001-UP (MACHINE) POWERED BY C3.4B Engine(SEB...
2020/6/13
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...