The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in 16 steps for disassembly, including the sun gear, carrier assembly, ring gear, planetary gears, shafts, bearings, and housing components. Reassembly is outlined in 18 steps, covering cleaning, applying sealant, pressing components, and torquing bolts to the specified setting. The overall process handles removing and rebuilding both older and newer swing drive styles.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...tuzhiyou2
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in 16 steps to fully disassemble the older style swing drive. These include removing the sun gear, carrier assembly, planetary shafts, bearings, and housing components. Reassembly is described in 17 steps, covering pressing components back together and installing seals, washers, and fasteners using specific tools. The level of detail provided aims to fully disassemble and reassemble the swing drive system.
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in 16 steps to fully disassemble the older style swing drive. These include removing the sun gear, carrier assembly, planetary shafts, bearings, and housing components. Reassembly is the reverse of disassembly, applying sealant or locking agents as needed and torquing fasteners to specifications. The process is similar for the newer swing drive style, involving removing over 15 parts across 14 illustrated steps.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...qfyc504378
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing bearings onto shafts and installing cups into the housing. Proper cleaning and application of sealant to mating surfaces is emphasized to prevent contamination.
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, taking care to press bearings onto shafts using a press and support blocks. Proper cleaning and application of sealant is emphasized to prevent contamination.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...lituo39419496
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing bearings onto shafts and installing cups into the housing. Proper cleaning and application of sealant to mating surfaces is emphasized to prevent contamination.
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing the bearing cone onto the shaft and installing cups into the housing. Precautions are given to keep parts clean and apply the correct torque during assembly.
Caterpillar Cat 345C L Excavator (Prefix S5M) Service Repair Manual Instant D...yan77xunhao
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345C L Excavator. It details 30 steps for disassembling the final drive, carrier assemblies, ring gear, and other components. Tools required are listed. Identification marks and orientations must be noted to aid reassembly.
Caterpillar cat 345 c l excavator (prefix s5m) service repair manual (s5m0000...kmf9ioseodk
This document provides instructions for disassembling and assembling the final drive of a 345C L excavator. The disassembly procedure involves removing over 20 components of the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs to clean all parts, apply anti-seize compound, install bearing cups and cones, and adjust the bearing preload using shims to achieve the proper load. Precise positioning of identification marks is important for reassembling the planetary gears in the correct locations.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...tuzhiyou2
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in 16 steps to fully disassemble the older style swing drive. These include removing the sun gear, carrier assembly, planetary shafts, bearings, and housing components. Reassembly is described in 17 steps, covering pressing components back together and installing seals, washers, and fasteners using specific tools. The level of detail provided aims to fully disassemble and reassemble the swing drive system.
The document provides instructions for disassembling and assembling the swing drive of a 312C excavator. It describes removing over 20 individual parts in 16 steps to fully disassemble the older style swing drive. These include removing the sun gear, carrier assembly, planetary shafts, bearings, and housing components. Reassembly is the reverse of disassembly, applying sealant or locking agents as needed and torquing fasteners to specifications. The process is similar for the newer swing drive style, involving removing over 15 parts across 14 illustrated steps.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...qfyc504378
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing bearings onto shafts and installing cups into the housing. Proper cleaning and application of sealant to mating surfaces is emphasized to prevent contamination.
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, taking care to press bearings onto shafts using a press and support blocks. Proper cleaning and application of sealant is emphasized to prevent contamination.
Caterpillar Cat 312C L Excavator (Prefix CBT) Service Repair Manual (CBT00001...lituo39419496
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing bearings onto shafts and installing cups into the housing. Proper cleaning and application of sealant to mating surfaces is emphasized to prevent contamination.
This document provides instructions for disassembling and assembling the swing drive of a 312C excavator. The disassembly procedure involves using tools to remove over 20 individual parts from the carrier assembly, planetary gears, and housing. The assembly procedure instructs cleaning and applying sealant to parts before installing components in reverse order, such as pressing the bearing cone onto the shaft and installing cups into the housing. Precautions are given to keep parts clean and apply the correct torque during assembly.
Caterpillar Cat 345C L Excavator (Prefix S5M) Service Repair Manual Instant D...yan77xunhao
This document provides step-by-step instructions for disassembling and assembling the final drive components of a 345C L Excavator. It details 30 steps for disassembling the final drive, carrier assemblies, ring gear, and other components. Tools required are listed. Identification marks and orientations must be noted to aid reassembly.
Caterpillar cat 345 c l excavator (prefix s5m) service repair manual (s5m0000...kmf9ioseodk
This document provides instructions for disassembling and assembling the final drive of a 345C L excavator. The disassembly procedure involves removing over 20 components of the final drive including the cover, ring gear, carrier assemblies, planetary gears, and sprocket housing. The assembly procedure instructs to clean all parts, apply anti-seize compound, install bearing cups and cones, and adjust the bearing preload using shims to achieve the proper load. Precise positioning of identification marks is important for reassembling the planetary gears in the correct locations.
Fiat Kobelco SL30B Skid Steer Loader Service Repair Manual.pdfprmy389342
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- The manual outlines many safety rules for operating the loader safely, such as wearing protective equipment, not allowing passengers, and ensuring all equipment is lowered before servicing.
- It provides standard torque specifications for various types of hardware including decimal, metric, and hydraulic fittings to ensure correct tightening of components.
- The manual is organized into tabs covering general information, engines, fuel system, electrical systems, power train, hydraulics, and mounted equipment. Each tab contains an index of relevant sections.
- Sections provide instructions
Fiat Kobelco EX95W Mini Wheel Excavator Service Repair Manual.pdfprmy389342
This document provides safety precautions for operating an excavator. It advises reading the operator's manual carefully before starting or using the machine. Operators should be familiar with all safety signs and their meanings. Only authorized personnel should operate the machine. Personal protective equipment such as hard hats and safety glasses should always be worn. The operator's compartment and controls should be kept clean. Operators should not jump on or off the machine and should keep hands and feet inside the cab at all times. The machine should come to a complete stop before the operator exits. Height, width and weight limitations of the work site must be assessed. Underground utilities should be located and marked before digging.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdfprmy389342
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, covers, fasteners, and guards. The parts are organized with an index and diagram to allow technicians to easily find replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes overview diagrams of truck components, inspection and maintenance schedules, repair procedures, and part replacement instructions. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown LP3010 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdfprmy389342
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages and outlining safe maintenance practices such as blocking the wheels, disconnecting batteries, and checking for fuel leaks before working.
2. Procedures for lifting parts of the forklift like the drive wheels or rear, including using blocks and jacks of adequate capacity.
3. Chain securing an upright carriage when raised and shipping tie-down instructions.
Clark EPX 16-20S Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages in the manual and on trucks to understand hazards.
2. Recommended safe maintenance practices such as properly ventilating work areas, using fire protection equipment, and disconnecting batteries before working on electrical systems.
3. Procedures for safely lifting, jacking, and blocking forklifts, including raising the drive wheels, upright, and entire truck, to access components for repair work.
Clark CMP 70 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 60 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...prmy389342
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure cleanliness when handling engine parts.
Fiat Kobelco SL30B Skid Steer Loader Service Repair Manual.pdfprmy389342
This document is the service manual for an SL30B skid steer loader. It provides safety precautions and instructions for operating and servicing the loader. Some key points:
- The manual outlines many safety rules for operating the loader safely, such as wearing protective equipment, not allowing passengers, and ensuring all equipment is lowered before servicing.
- It provides standard torque specifications for various types of hardware including decimal, metric, and hydraulic fittings to ensure correct tightening of components.
- The manual is organized into tabs covering general information, engines, fuel system, electrical systems, power train, hydraulics, and mounted equipment. Each tab contains an index of relevant sections.
- Sections provide instructions
Fiat Kobelco EX95W Mini Wheel Excavator Service Repair Manual.pdfprmy389342
This document provides safety precautions for operating an excavator. It advises reading the operator's manual carefully before starting or using the machine. Operators should be familiar with all safety signs and their meanings. Only authorized personnel should operate the machine. Personal protective equipment such as hard hats and safety glasses should always be worn. The operator's compartment and controls should be kept clean. Operators should not jump on or off the machine and should keep hands and feet inside the cab at all times. The machine should come to a complete stop before the operator exits. Height, width and weight limitations of the work site must be assessed. Underground utilities should be located and marked before digging.
Daewoo Doosan DE12TIS Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12TI Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12T Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Daewoo Doosan DE12 Diesel Engine Service Repair Manual.pdfprmy389342
This maintenance manual provides instructions for maintaining DAEWOO DE series diesel engines, models DE12, DE12T, DE12TI, and DE12TIS. It describes the engine components and specifications. Proper maintenance like checking coolant concentration and fan belt tension are important to maintain optimum engine performance and durability. The manual explains maintenance procedures and includes symbols to indicate removal, installation, cleaning, and other service operations.
Crown TSP6000 Series Turret Order Picker Parts Catalogue Manual.pdfprmy389342
This document is a parts manual for the power unit of a TSP6000 series truck. It contains 30 numbered parts that make up the power unit, listed with their part numbers and the quantity required. Key components included are the power unit enclosure, rear doors, covers, fasteners, and guards. The parts are organized with an index and diagram to allow technicians to easily find replacement parts.
Crown LP3020 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes overview diagrams of truck components, inspection and maintenance schedules, repair procedures, and part replacement instructions. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown LP3010 Lift Truck Service Repair Manual.pdfprmy389342
The document provides maintenance information for LP3010/3020 series trucks. It contains sections on lubrication and adjustment, hydraulics, the drive unit, electrics, brakes, steering, lifting mechanisms, cylinders, and electrical diagrams. The document includes safety notes, inspection and maintenance schedules, repair and replacement procedures, and diagrams. Revisions provide corrections and additions to the text as well as changes to diagrams, tables, and descriptions.
Crown GPC2000 Series Lift Truck Parts Catalogue Manual.pdfprmy389342
This document provides lubrication information for a parts manual. It lists the recommended lubricants and their specifications for various components of the product. Grease type 2 is recommended for bearings and grease type 2-P for ball bearings. Mobilex 00-200 is suitable for lower operating temperatures, while Mobilex 005-200 is recommended for higher temperatures.
Clark TMX12-25 Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages and outlining safe maintenance practices such as blocking the wheels, disconnecting batteries, and checking for fuel leaks before working.
2. Procedures for lifting parts of the forklift like the drive wheels or rear, including using blocks and jacks of adequate capacity.
3. Chain securing an upright carriage when raised and shipping tie-down instructions.
Clark EPX 16-20S Forklift Service Repair Manual.pdfprmy389342
This document provides instructions for safely maintaining electric forklifts. It discusses:
1. Identifying safety signs and messages in the manual and on trucks to understand hazards.
2. Recommended safe maintenance practices such as properly ventilating work areas, using fire protection equipment, and disconnecting batteries before working on electrical systems.
3. Procedures for safely lifting, jacking, and blocking forklifts, including raising the drive wheels, upright, and entire truck, to access components for repair work.
Clark CMP 70 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 60 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Clark CMP 50 Forklift Service Repair Manual.pdfprmy389342
This document provides safety instructions for lifting, jacking, and blocking a CLARK forklift truck during maintenance. It identifies approved lifting points on the truck and describes procedures for safely raising different parts of the truck, including the drive wheels, front with a hoist, and upright carriage. Workers are instructed to use blocking and wheel cradles, and cautioned to ensure any lifting equipment is rated for the truck's weight.
Caterpillar Cat D400E II EJECTOR TRUCK (Prefix APF) Service Repair Manual (AP...prmy389342
This document provides instructions for removing and installing inlet and exhaust valves, valve guides, valve seat inserts, and the engine oil filter base on a D400E II Ejector Truck with a 3406E engine. The procedures describe draining fluids, using various specialty tools to compress springs, extract components, and properly position replacement parts. Safety notices warn of potential injury from compressed springs and ensure cleanliness when handling engine parts.
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312C L EXCAVATOR CBT
Configuration: 312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engine
Disassembly and Assembly
312C Excavator Machine Systems
Media Number -RENR7476-00 Publication Date -01/07/2003 Date Updated -22/07/2003
i06252122
Swing Drive - Disassemble - Older Style
SMCS - 5459-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 1P-0510 Driver Gp 1
C 5F-7343 Bearing Puller Gp 1
Start By:
a. Remove the swing motor.
b. Remove the swing drive.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g01001554
1. Use a suitable lifting device to place the swing drive on Tooling (A). The weight of the
swing drive is approximately 84 kg (185 lb).
2. Remove sun gear (1) from carrier assembly (2).
3. Remove carrier assembly (2) from ring gear (3).
Illustration 2 g00986664
4. Use the following procedure to disassemble carrier assembly (2).
a. Use a hammer and a punch to drive spring pin (5) into planetary shaft (4). Repeat for
the remaining planetary shafts.
2/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 3 g00828757
b. Remove planetary shafts (4), planetary gears (7), and thrust washers (6) from the
carrier assembly.
c. Remove bearings (8) from planetary gears (7).
d. Use a hammer and a punch to remove pins (5) from planetary shafts (4).
Illustration 4 g00828759
5. Remove washer (9) from the carrier assembly.
Illustration 5 g00828760
6. Remove sun gear (10) and ring gear (11) from the swing drive.
3/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g01001555
7. Loosen bolt (12) until approximately one half of the threads are out of the shaft.
Illustration 7 g00828763
8. Use a suitable lifting device to position remaining components with the pinion gear on top.
The weight of the components is approximately 66 kg (145 lb).
9. Remove bolts (13).
4/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g00828764
10. Use a suitable lifting device to position carrier assembly (14) and swing drive housing (15)
in a suitable press. Support the bottom of swing drive housing (15) on suitable cribbing.
Illustration 9 g01439357
11. Carefully press bolt (12) in order to force the pinion shaft, the bearings, and the cage out of
carrier assembly (14) and swing drive housing (15).
12. Remove carrier assembly (14) with the bearing cone from the swing drive housing.
5/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Illustration 10 g01001559
13. Use Tooling (B), Tooling (C), and a suitable press to remove carrier assembly (14) from
bearing cone (18). Support Tooling (C) with suitable blocks. Place support under carrier
assembly (14) in order to prevent carrier assembly (14) from dropping to the floor.
Illustration 11 g00828771
Illustration 12 g00828772
6/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. 14. Use the following procedure to disassemble carrier assembly (14).
a. Use a hammer and a punch to drive spring pin (20) into planetary shaft (19). Repeat
for the remaining planetary shafts.
b. Remove planetary shafts (19), thrust washers (21), and planetary gears (22) from the
carrier assembly.
c. Remove bearings (23) from planetary gears (22).
d. Use a hammer and a punch to remove spring pins (20) from planet shafts (19).
Illustration 13 g00828774
15. Remove retainer (24) from carrier assembly (14).
Illustration 14 g00828775
16. Remove spacers (25) and (26) from the remaining pinion and bearing assembly.
7/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 15 g01001562
17. Place the pinion and bearing assembly in a suitable press. Use Tooling (B) and Tooling (C)
to remove bearing cone (28) from shaft (27). Place support under shaft (27) in order to
prevent shaft (27) from dropping to the floor.
Illustration 16 g00828778
18. Remove cage (29) from shaft (27).
8/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 17 g00828781
19. Remove lip seal (30) from cage (29).
Illustration 18 g00828782
20. Remove bearing cup (31) from swing drive housing (15).
9/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 19 g01001563
21. Flip swing drive housing (15) and remove bearing cup (32).
Newer Style
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5F-7343 Bearing Puller Gp 1
Start By:
a. Remove the swing motor.
b. Remove the swing drive.
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
10/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 20 g03576636
1. Use a suitable lifting device to place the swing drive on table. The weight of the swing drive
is approximately 84 kg (185 lb).
2. Remove sun gear (1) from carrier assembly (2).
3. Remove carrier assembly (2) from ring gear (3).
Illustration 21 g03576957
4. Remove retaining ring (4). Remove thrust washer (5) and planetary gear (6).
Illustration 22 g03576977
11/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 23 g03576996
5. Remove bearing assembly (6) and thrust washer (7).
6. Drive spring pin (9) into shaft (8). Remove shaft (8) from carrier assembly (2).
7. Repeat Steps 4 through 6 for the remaining planetary gears.
Illustration 24 g03577121
Illustration 25 g03577158
8. Remove sun gear (10) from the planetary carrier assembly.
12/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. 9. Remove ring gear (11) from housing (12).
Illustration 26 g03577196
10. Remove planetary carrier assembly (13) from the pinion shaft.
Illustration 27 g03577357
11. Drive spring pin (15) into shaft (14) in order to remove shaft (14) and the planetary gear
assembly.
Illustration 28 g03577616
13/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. 12. Remove shaft (14), thrust washer (16), bearings (17), planetary gear (18), and thrust washer
(19). Repeat Steps 11 through 12 for the remaining planetary gear assemblies.
Illustration 29 g03577639
13. Turn the housing and the pinion shaft assembly over and remove plates (20).
Illustration 30 g03578221
14. Remove retaining ring (21) in order to remove pinion shaft (22).
Illustration 31 g03578226
14/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. 15. Use a suitable press to remove pinion shaft (22) from the bearings and housing assembly
(12).
Note: Take some precaution to prevent the pinion shaft from dropping out of the bottom.
Illustration 32 g03578276
Illustration 33 g03578319
16. Remove bearing (23) and seal (24) from the housing.
Illustration 34 g03578476
15/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 17. Use Tooling (A) and a suitable press to remove bearing assembly (25) from pinion shaft
(22). Support Tooling (A) with suitable blocks. Place support under pinion shaft (22) in
order to keep from dropping to the floor.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Sun May 17 12:45:23 UTC+0800 2020
16/16
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T E...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 312C L EXCAVATOR CBT
Configuration: 312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engine
Disassembly and Assembly
312C Excavator Machine Systems
Media Number -RENR7476-00 Publication Date -01/07/2003 Date Updated -22/07/2003
i07420705
Swing Drive - Assemble - Older Style
SMCS - 5459-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-2420 Transmission Repair Stand 1
B 1P-0510 Driver Gp 1
D FT-1317 Sleeve 1
E 5P-3413 Pipe Sealant -
F - Loctite High Flex Form-In-Place Gasket -
G
5P-8247 Hard Washer 2
5P-8245 Hard Washer 2
4C-5655 Threaded Adapter 2
8B-7550 Push-Puller Leg 2
1U-9895 Crossblock 1
3H-0465 Push-Puller Plate 4
6B-6682 Full Nut 2
9U-5017 Torque Wrench 1
0V-0375 Bolt 1
1F-7958 Full Nut 1
1/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. - Loctite 243 -
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00828781
1. Apply a thin coating of Tooling (E) to the seal bore in cage (29). Install lip seal (30) in cage
(29).
2/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 2 g00828778
2. Install shaft (27) in cage (29).
Illustration 3 g00828784
3. Raise the temperature of bearing cone (28) and place bearing cone (28) on shaft (27).
3/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 4 g01001588
4. Use Tooling (B), Tooling (D), and a suitable press to install bearing cone (28) on the shaft.
Illustration 5 g01001563
5. Lower the temperature of bearing cup (32). Install bearing cup (32) in swing drive housing
(15).
4/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 6 g00828782
6. Flip swing drive housing (15). Lower the temperature of bearing cup (31). Install bearing
cup (31) in swing drive housing (15).
Illustration 7 g00828788
7. Clean the mating surfaces of swing drive housing (15) and cage (29). Apply a thin coating
of Tooling (F) to the mating surfaces of cage (29) and swing drive housing (15).
8. Install the assembled shaft (27) and cage (29) in swing drive housing (15).
9. Apply Tooling (H) to the threads of bolts (13). Install bolts (13). Tighten bolts (13) to torque
of 33 ± 3 N·m (25 ± 2 lb ft).
5/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
24. Illustration 8 g00828789
10. Install spacers (25) and (26).
Illustration 9 g01001808
11. Set up Tooling (G), as shown. Check and record the seal drag torque.
Note: Make sure that the shaft does not turn when the seal drag torque is checked.
Illustration 10 g00828772
6/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 11 g00828771
12. Use the following procedure to assemble the carrier assembly:
a. Install bearing (23) in planetary gear (22).
b. Place thrust washer (21) on each side of the assembled bearing and planetary gear.
c. Slide thrust washers (21), bearing (23), and planetary gear (22) into the carrier
assembly.
d. Install planetary shaft (19) so that the hole for spring pin (20) aligns with the hole in
the carrier assembly.
e. Use a hammer to drive spring pin (20) into the carrier assembly and the planetary
shaft.
f. Repeat Steps 12.a through 12.e for the remaining planetary gear sets.
Illustration 12 g00828792
7/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. Illustration 13 g01001836
13. Raise the temperature of bearing cone (18). Use Tooling (B) and Tooling (D) to install
bearing cone (18) on carrier assembly (14).
14. Use a suitable lifting device to place swing drive housing (15) with shaft (27), cage (29),
and bearing cone (28) on Tooling (A). Refer to Illustration 7 in order to view the assembly.
Illustration 14 g01001846
15. Install carrier assembly (14) into swing drive housing (15).
8/18
312C & 312C L Excavators CBT00001-UP (MACHINE) POWERED BY 3054T Engi...
2020/5/17
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...